We are seeking for pest control technicians to join our team!

Contact Mr Avi @ 91383851 for an interview.

Job Description

Duties and Responsibilities

• Spray, fog, bait and trap to control pests.

• Control roaches, ants, rodents, birds, termites, etc.

• Inspect property, determine problem and implement the most effective solution.

• Receive work orders and work requests, determine nature of the problem and undertake

necessary actions.

• Ensure safety of clients and their respective customers while performing duties.

• Operate spraying equipment, bait gun, power fogger and various power and hand tools

in performance of duties.

• Comply to workplace safety regulation while executing the duties and maintenance of

the equipment and vehicle

•. Perform other related work as instructed by reporting officer

Salary Range:

$1650 to $2500

Job Requirements

Attributes

· Ability to work in a team

· Attention to detail and accuracy

· Communicate well with customers to build strong customer relationship

· Ability to manage time and complete all delegated tasks efficiently

· Excellent knowledge of Singapore road with good driving record

Requirement

· NEA Technician License ( those with no license and experience may also apply)

· Min NITEC

· Class 3 Driving License ( preferred but not a requirement

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• High purity chemical and slurry systems operation and maintenance.
• Preventive and corrective maintenance works on electrical and/or mechanical components to support daily operations.
• Drum and pump components replacements, servicing, and qualifications.

Requirements:

• Nitec and above.
• Minimum 3 years of working experience in chemical system handling.
• Proficient with Chemical safety and Quality Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Set up and operate machines such as CNC/NC Milling, Lathe, Surface Grinding, Shaping, Hobbing, broaching and conventional machines to produce high quality products conforming to the customers’ specifications.

Support CORE & EH&S activities.

· Setup, operate and maintain all types of conventional or CNC machines such as Milling, Lathe, Surface Grinding, Shaping, Hobbing, broaching and conventional machines in the cell/process.

· Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks.

· Perform simple troubleshooting of machines.

· Able to read and interpret blueprints.

· Maintain pertinent records; Shop-paper and work in accordance to technical instructions and drawings.

· Work in an orderly manner and keeping work areas, benches and machinery in a tidy and clean condition after used.

· Notify the Supervisor timely for any machine or tooling problems which could jeopardize product quality or infringe safe work conditions.

· Engage in any other activities or responsibilities as requested by the Supervisor.

Minimum Education required (specific field or equivalent):

NITEC /Higher NITEC in Precision Engineering or equivalent.

Minimum years of experience in role:

At least 2 years working experience in a Precision Engineering environment.

Preferred Skills (if any):

· Basic command of written and spoken English.

· Able to work weekly rotating shifts.

Desired Characteristics:

· A team player.

· Good mechanical aptitude.

· Good knowledge in CNC programming.

· Able to apprehend technical instructions/drawings.

· Able to use measuring instruments.

· Previously worked in a manufacturing environment.

• Maintain, troubleshoot, and repair container handling equipment at PSA, depots, and workshops.
• Conduct scheduled preventive maintenance services for equipment.
• Respond to customer breakdown calls promptly.
• Assist in assembling, installing, testing, and commissioning new equipment.
• Work on various equipment types: Reach stacker, empty container stacker, terminal tractor, and heavy forklift.

Requirements:

• ITE in Mechanical/Electrical/Automotive or equivalent.
• Possess Forklift or Class 3 driving licenses.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Forum Architects is employing. If you are quick thinking, resourceful, energetic, and a happy person to be around, that will be advantageous. We invite candidates with hospital and healthcare experience to apply.

- Diploma in Architecture or equivalent

- Minimum 2 years experience in a similar capacity

- Proficiency in Revit and Autocad

- Knowledge of authorities’ requirements

Job Summary

(Description of general purpose of the job)

· Samples collection and chemical adjustments on the plating tanks.

· Perform plating tanks maintenance.

· Management of Chemical wastes disposal and receiving chemicals.

Roles and Responsibilities

(Essential roles, responsibilities and activities a candidate can expect to assume in this position)

· Collect of chemical samples for lab analysis.

· Adjust plating baths by chemical additions.

· Make-up new plating solutions.

· Perform monthly maintenance of filter cartridges change and carry out scheduled treatment.

· Liaise with licensed waste collector on the wastes disposal.

· Receive of incoming chemicals, and updating the chemical inventory log book.

· Support CORE, EH&S, Ethics & Compliance and Quality initiatives.

· Carry-out plating on test specimens for Monthly Periodic Testings.

· Perform other activities assigned by direct Supervisor.

Qualification and Education Requirements (Education and Work experience that a candidate should have when applying for position)

Minimum Education required (specific field or equivalent):

NITEC in Chemical Technology.

Minimum years of experience in role:

No relevant experience required but positive attitude in taking on the role is a must.

Preferred Skills (if any):

· Basic command in written and spoken English.

· Knowledge of Microsoft office Applications.

· Able to work on rotating shifts.

· Basic knowledge of Chemical Handling & Safety.

Job Summary

(Description of general purpose of the job)

· Setup and operate a wide variety of electroplating equipments to produce high quality products conforming to the customers’ specifications.

· Perform manual labour in a fast paced production environment to meet customer demand, delivery, cost of sales and late to start.

· To support CORE & EH&S activities.

· Multi task from plating to spray painting.

· Require to use full PPE in a warm environment.

Roles and Responsibilities

(Essential roles, responsibilities and activities a candidate can expect to assume in this position)

· Setup, operate and maintain electroplating equipment as per Job Instruction Sheet.

· Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks as per Plating Master & Manufacturing Engineering folder.

· Read and interpret Job instruction sheet required to carry out work tasks.

· Adhere to EH&S & CORE requirements in the work place, submit Hazard observations, QCPC Turnbacks and Safety Innovative Team Projects every month.

· Work in an orderly fashion keeping work areas, work table, plating table, tools, and fixtures in a tidy and clean condition after used.

· Perform daily housekeeping and weekly total productive maintenance.

· Engage in any other activities or responsibilities as requested by the Supervisor.

· Notify the Supervisor or any machine or tooling problems which could jeopardize product quality or infringe safe work conditions.

· Raise Imaint when equipment is down.

Qualification and Education Requirements (Education and Work experience that a candidate should have when applying for position)

Minimum Education required (specific field or equivalent):

Secondary to NITEC qualification in Precision Engineering or equivalent.

Minimum years of experience in role:

At least 2 years of plating experience.

Preferred Skills (if any):

· Knowledge on operating an oven is an added advantage.

· Physically fit & able to work within close proximity of chemical processing.

· Work experience in electroplating is preferred but not necessary.

· Basin command of written and spoken English.

· Perform rotating shifts.

· Able to tolerate high temperature work environment.

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Engage in hands-on activities to conduct regular inspections and monitoring of various building services and facilities.
• Address breakdowns, respond to complaints/feedback, and attend to tenant service calls regarding building services and facilities.

Requirements:

• Nitec and above.
• At least 3 years of relevant experience.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Perform maintenance tasks on facility systems, including cooling/heating, compressed air, vacuum systems, cleanroom, and non-cleanroom ACMV systems and equipment.
• Assist engineers with operational support, troubleshooting, and problem-solving.
• Coordinate and follow up on internal and external activities as needed.

Rquirements:

• NITEC in mechanical/electrical engineering or equivalent.
• Minimum 2 years experience in manufacturing industries.
• Preferably experienced in cleanroom operations and general facilities systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Troubleshoot and repair equipment failures to reduce downtime.
• Plan and execute regular preventive equipment maintenance.
• Collaborate with Engineers to address process-related problems linked to equipment failures.
• Maintain cleanliness and adhere to safety and cleanroom protocols.

Requirements:

• Nitec in Mechanical or equivalent.
• Minimum 2 years of experience in relevant field.
• Familiarity with Programmable Logic Control (PLC) is a plus.
• Willing to work 12-hour rotating day and night shifts.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Roles and Responsibilities

(Essential roles, responsibilities and activities a candidate can expect to assume in this position)

· Setup, operate and maintain of Gas Nitride, Atmosphere and Vacuum Hardening processes.

· Setup, operate and maintain all measuring equipment, gages and fixtures for making accurate inspection checks.

· Enter all information on quality documents accurately and timely.

· Maintaining active certified machinist status.

· Read and interpret blueprints.

· Adhere to EH&S & CORE requirements in the work place.

· Work in an orderly fashion keeping work areas, benches and machinery in a tidy and clean condition after used.

· Perform daily housekeeping and sustain 5S implementations.

· Engage in any other activities or responsibilities as requested by the Supervisor.

· Notify the Supervisor of any furnace/machine or tooling problems which could jeopardize product quality or infringe safe work conditions.

Dimension

and Scope

(Describe how the position fits into the organization as a whole as well as the level of accountability)

Qualification and Education Requirements (Education and Work experience that a candidate should have when applying for position)

Minimum Education required (specific field or equivalent):

NITEC qualification in Precision Engineering or equivalent.

Minimum years of experience in role:

At least 3 years’ experience in manufacturing plant, preferably Heat Treat process.

Preferred Skills (if any):

· Work experience in heat treatment work environment is preferred but not necessary.

· Basic command of written and spoken English.

· Physically and mentally fit & willing to perform rotating shifts.

· Able to tolerate high temperature work environment.

Responsibilities

• Responsible for setting and operating CNC Machines
• Responsible for performing preventative maintenance on product equipment
• Responsible for performing other duties as and when required

Requirements

• Min Nitec in Engineering
• Min 1 years of working experience in Precision/ CNC Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing customer support for Equipment Products with regard to Installation, Training and Field Service via on-site visits, Phone, Internet Media and email

Requirements

• Min Diploma in Engineering
• Min 3 years of working experience in machine service experience
• Overseas Travelling is required

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting the implementation work for the EES system/ CCTV
• Responsible in performing Preventive Maintenance (PM) on the EES system/ CCTV
• Responsible for troubleshooting work when issues arises

Requirements

• Min Nitec in Electrical/Electronic/Engineering or related discipline
• Min 1 years of working experience in installation / Servicing of CCTV and network switch or EES

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Benefits Summary:

• Up $4000 + Allowance + Benefits
• 5 Days work week
• Working Location: Tuas

Responsibilities:

• Regular inspection to ensure machines equipments are in optimal performance
• Conducting preventing maintenance and servicing for the machines and equipment
• Track, monitor, and manage its spare parts inventory system at all times
• Maintain the documents records
• Any ad-hoc duties as required

Interested candidates, please submit your updated resume in MS format by using the Apply Now Button.

Follow us on Facebook for more info:

https://www.facebook.com/EC-Recruitment-Pte-Ltd-113771667194961/

Text us on for more details:

https://wa.me/6582693981

Follow us on Telegram for more job opportunities:

https://t.me/ecrecruitment

Our dedicated and approachable E&C consultants will get back to you soon for a confidential discussion.

By submitting your application or resume to us, you will be deemed to have agreed and consented us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

**We regret to inform that only shortlisted candidates would be notified. **

Do you want to make a positive impact on the world? Sustainable development is at the heart of everything we do.

Seventy-five years ago, we created a home for creative thinkers seeking to solve the world’s biggest challenges. Today, a collective of 16,000+ Arupians gather across the globe from 140 different countries to build a sustainable future.

We strive to create an inclusive environment and give everyone a voice. Diversity drives innovation in our projects and offers empathy to the communities we serve. We welcome and encourage applications from people living with disability and provide workplace adjustments.

At Arup, you’ll do more than work — you’ll shape a better world.

About this role
Do you find purpose in connecting the digital with the physical world? In this role, you will use your digital skills to create critical infrastructure from life-saving hospitals to resilient highways. Every day you will have the opportunity to push BIM boundaries and create new possibilities for our clients. With access to a global community of CAD champions, you will collaborate with and learn from other digitally-driven minds.

What will I do?

• Prepare, check, and document detailed architectural drawings at all scales and stages of the project, from concept to construction, and statutory submissions.
• Prepare detailed cross-sections and space proofing diagrams
• Assist team in preparation of project documentation, presentations, and detailed drawings, ensuring quality and presentation meet Arup’s standard requirements.
• Understand Singapore BIM submission requirement and assist team to update the BIM documentation to meet BIM submission requirement - Singapore BIM Guide (v2.0 and beyond), ISO 19650, and SS CP83.
• Understand international BIM standards and LOD requirements for different phases of work
• Contribute to the development of good practices within own discipline through involvement in Arup’s skills network.

What will I bring?

• Higher NITEC in Building Drafting, Diploma or Degree in an engineering or technical discipline.
• 2-5 years of relevant industry experience in Architecture within a consulting business environment.
• Proficient in AutoCAD, Revit, Navisworks, and other similar BIM software. Experience in Microstation will be an advantage..
• Knowledge of Sketch-up, Rhino or other 3D software is an advantage
• Recognises best practices and actively promotes their wider use throughout the team or group.

Our firm
Arup is an independent firm of designers, planners, engineers, architects, consultants, and technical specialists, working across every aspect of the built environment.

Founded by Sir Ove Arup, a gifted engineer-philosopher with an original and restless mind, our firm has always had a keen sense of purpose.

We create spaces where everyone feels safe, seen and included and able to perform at their best. We take an approach to flexible working that supports the diversity and well-being of our members.

Are you ready to shape a better world?
Our open roles are waiting for you on the Arup careers page. If you like what you see here, apply today.

Arup does not accept unsolicited resumes from recruiters or employment agencies.

Responsibilities

• Responsible for performing preventive maintenance and calibration of the machines according to the checklist
• Responsible in analysing machine problems and repair
• Responsible for updating and maintaining maintenance records and forms regularly

Requirements

• Min Nitec in Electrical Engineering
• Min 2 years of working experience in maintenance and repair of CNC metal cutting machines
• Knowledge in PLC will be advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026