• Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
• Programs lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
• Sets-up lathes and adjusting three- and four-jaw chucks, tools, and attachments.
• Verifies settings by measuring positions, first-run part, and sample workpieces; adhering to Drawing Requirements.
• Maintains equipment by completing preventive maintenance requirements; following manufacturer’s instructions;
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
• Documents actions by completing production and quality logs.
• Maintains safe operations by adhering to safety procedures and regulations.
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Associate Technician, Operations (2 years contract)

THE OPPORTUNITY

Our Manufacturing Operations teams are the people that make our products. We work in the manufacturing plants with a “Safety First, Quality Always” mindset striving for continuous improvement. We work in the local plant connected to our global manufacturing network to ensure the highest quality of raw materials, intermediates, and finished products.

WHAT YOU WILL DO

As a technician, you will join one of the teams who manufacture our medicines. The environment that these teams work in is a clean room environment doing filling of sterile vials. Each team is approximately 10 people working on a 24x7 shift pattern. We are proud of being a diverse organisation with an even split of genders at a technician level within Biotech.

Expectations

Achieve competency in the following as Associate Technician (O1):

Qualified in at least 1 of 4 Operating Modules

• Parts Prep/ Autoclave
• Formulation
• Filling
• AVIM/ Inspection

Proficient in 1 of 3 systems (Perform independently)

• MES
• SAP
• GLIMS

Proficient in all support activities (Perform independently)

• Cleaning & Sanitization
• EM Sampling
• Material Management

Apply MPS

• Standardized Work
• Problem Solving/ On-Point Problem Solving

Routine Operation

• Setup and operate pharmaceutical production equipment including high-speed filling lines for sterile injectables, robotic technology, compounding panels and automatic CIP/SIP.
• Dispense, formulate and fill active biological product batches as required to meet the production schedule.
• Perform routine QC sampling and in-process testing of the product at various stages throughout manufacturing i.e bioburden sampling, water sampling.
• Microbial sampling and swabbing of room and equipment.
• Perform cleaning and upkeep of the Grade C & D cleanrooms and production equipment.
• Perform filter integrity testing using an automatic filter integrity test unit.
• Preparation of equipment including loading and starting of sterilisation cycles in autoclaves.
• Complete batch documentation as required including raising of exceptions in a DI compliant manner.
• Perform in-process sampling on semi-finished drug products.
• Perform visual inspection, labeling and packaging on semi-finished drug products.
• Perform all tasks in accordance with the standard operating procedures and maintain strict compliance to GMP at all times.

Event, Atypical Investigations

• Report QN/deviations if any.
• Participate in SHE, Business Compliance, cGMP and compliance matters, where applicable.
• Responsible to escalate Operations issues to Lead Tech or Shift Manager when required.

Continuous Improvement

• Responsible to participant in Kaizen events in pharm operations in accordance with Kaizen plans when assigned.

WHAT YOU MUST HAVE

To be successful in this role, you will have:

• A Diploma or Technical School graduate with background in operations and maintenance or any relevant studies
• Must be willing to work in 24x7 rotating shift pattern.
• Min 2 -8 years of working experience preferably in manufacturing industry preferred depending on the level of the role you are applying for (O1 to O3).
• Good understanding of safety procedures/practices.
• Good command of English to be able to read and understand procedures, write simple comments, and communicate with team.
• Ability to work collaboratively in a team environment.

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Pharmaceutical Manufacturing.
• A state-of-the-art facility that delivers solution to its customers world-wide
• Highly engaging team that aims to innovate the future.

Our Manufacturing & Supply Division is committed to be the most trusted supplier of biopharmaceuticals worldwide. Our facilities, along with our external contractors, suppliers, and partners, create an interdependent global manufacturing network that’s committed to delivering a high quality, reliable supply to customers and patients on time, every time.

Position: Pest Control Technician
Location: Various locations, primarily focused on food & beverage establishments
Salary: $2,100 – $3000

About the Role
We are seeking responsible and detail-oriented Pest Control Technicians to join our team. As a Pest Control Technician, you will perform thorough inspections and administer pest management solutions across various sites, ensuring high-quality service for all clients.

Key Responsibilities

• Conduct inspections and apply tailored pest control treatments for each site
• Primarily serve clients in the food & beverage industry, along with residential, commercial, and industrial settings
• Organized scheduling to streamline appointments within the same area on the same day

Job Requirements

• Availability for a 5.5-day work week (office hours), with half-day on Saturdays
• Willingness to work overtime when required, compensated accordingly
• Class 3 license required; no prior experience in pest control necessary

Compensation and Benefits

• Basic salary(Non-Experienced) from $2,100 – $2,300, with total compensation (including OT and allowances) up to $4,000 per month
• Company van provided
• Monthly allowances for cell phone and petrol expenses
• Health insurance and opportunities for career growth

Aventir Group Pte Ltd
EA License: 24C2542

Based in Tuas Company (Transport provided)

Benefits:

• 37.5 hour work week (additional hours is OT-payable)
• $499 vouchers given yearly to buy Coca Cola products
• 18 days Annual Leave
• Shift working hours (Rotating shift hours: Mon - Fri, 730AM - 4PM / 330PM - 12MN)

Pacific Refreshments Pte Ltd (The Coca-Cola Company) is a strategic concentrate manufacturing plant in Asia. We are an export facility, specializing in the manufacturing of concentrates and beverage bases, with a complex portfolio, supporting the ASEAN, South Pacific and Southwest Asia business units. We are on a journey of growth - having completed the construction and expansion of our site towards doubling our manufacturing capacity in recent years. We have also embarked on our digital transformation journey, striving to be the Lighthouse for the Consumer Products Supply (CPS) plants in Asia and to be a leader in digital transformation.

Pacific Refreshments Pte Ltd is a winner of the ‘2020 HR Asia Best Companies to Work For’ Award.

Job Summary

The main function of this job is to generate maximum output of quality products through effective use of assigned resources and assets. To achieve this goal, this position:

• Looks at optimizing production, yield and product quality.
• Implement and maintain quality systems, improvement projects and other initiatives and tasks in line operation.

Operations

• Achieve line and batch efficiency and output requirements
• Maximize output by reducing downtime through monitoring and controlling changeover time.
• Produce the right quality by managing all quantity according to the process order.
• Ensure proper product labelling, coding and other information accurately.
• Carry out the right cleaning, sanitation and GMP according to Quality System requirements.
• Proper handover before going on leave / changeover shift.
• Follow strictly safety and environment requirements at the workplace.

Job Requirements:

• Diploma or NITEC qualifications in Engineering, fresh graduates are welcomed to apply
• Good communications in English
• Team player

If this sounds interesting and you like to explore, we look forward to meeting you!

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

Carry out routine, preventive and corrective maintenance, troubleshooting and repairing of instrument, analyser and electrical equipment, e.g. control valve, transmitters, switchgear control, motors, GC, boiling point, freeze point and flash point analyser, etc.

Diploma or NITEC in a relevant Engineering discipline

• At least 3 years relevant experience in an oil refinery/petrochemical plant, preferably with EMA license
• Candidates without relevant experience may be considered for entry-level positions

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Provide routine, preventive and corrective maintenance, troubleshooting and overhaul on process equipment such as piping, pressure vessel, pump, compressor, etc.

• Diploma or NITEC in a relevant Engineering discipline
• At least 3 years' relevant experience in an oil refinery/petrochemical plant
• Candidates without relevant experience may be considered for entry-level positions.

Responsibilities:

• Execute tasks / activities, standard maintenance and repair work such as Preventive, Corrective maintenance project executions at site effectively & efficiently
• Ensure all site executions are performed in accordance with all maintenance work procedures / OEM manuals / Vopak standards to ensure site quality, asset integrity and operability
• Ensure all site executions are performed in accordance with all Local Statutory and Vopak Safety processes to achieve good safety records / results
• Report any problems or issues with site facilities
• Process Permit-to-Work, Job safety Analysis (JSA), Lock-out, Tag-out (LOTO) or execute the Defeat of Safety Critical Equipment (DOSCE) during associate maintenance activities
• Participate and contribute in maintenance documentation review such as Safe Work Procedures (SWP), Job safety Analysis (JSA) and What-If Analysis
• Maintain work progress status and report to Supervisors on daily or adhoc basis
• Perform Work Executor in the Computerized Maintenance Management System (CMMS) workflow to receive, update and close up assigned Work Orders and checklist
• Support Maintenance Supervisor in ensuring that contractors or third party vendors execute maintenance tasks / activities at site effectively and efficiently
• Ensure that contractors carry out tasks/activities that adhered to safety, health and environment regulations and Vopak standards
• Mentor, guide technicians, junior technician in maintenance activities and job competency
• Help out in the supervision of Capex project execution
• Perform equipment or system testing / commissioning / Inspections / Pre-Startup Safety Review (PSSR) to properly handover to the Operations team after maintenance / project completion
• Standby as duty technician for emergency activation to perform corrective maintenance after working hours
• Suggest and execute ideas for continuous improvement in maintenance procedures and processes to improve or optimize maintenance costs, work processes and safety standards
• Assist to lead equipment training to the Operations dept or new trainees
• Practice good housekeeping
• Assist to maintain spare parts inventory levels, support on delivery checks by suppliers and maintain good preservation/housekeeping in the stores
• Only for Maintenance Senior Technicians - to mentor and guide technicians/junior technicians

Requirements:

• 3 years of relevant maintenance experience in similar industry
• ITE or Diploma equivalent in maintenance
• Familiar with and experience in Maintenance and inspection work
• Familiar with and experience in terminal equipment and assets
• Technically sound
• Familiar with terminal equipment and assets
• Familiar with terminal fire-fighting and emergency procedures
• Knowledge of safety, health and environment regulatory and practices
• Compliance with regulatory requirements
• Teamwork
• Mentoring experience is an advantage

Anticimex is the modern pest control company. Through prevention, new technology and sustainable solutions, we meet the new demands for healthy environments, for both individuals and businesses.

Due to growth, we’re looking for experience Pest Control Technicians to join our team. As part of your role, you will be responsible for the below duties:

· Execute pest service work and carry out inspections and treatments at customer sites

· To advise clients on pest management’s best practices and problems

· Identify and solve pest infestation issues with advised time span

· Maintain the provided work equipment in good working condition

· Provide post service work and record service reports, daily work reports and other work-related in a timely manner

What we’re looking for:

Pest Control Technicians

· 1-2 Years of working experience in the related field

· Possess good teamwork & strong commitment in work

Benefits:

• Basic Salary $2,800 -$4,800 (OTE $33,600 - $57,600 P.A.)

• Company welfares & Benefits

• Company vehicle + phone

• Other incentives

• Commission on upsell opportunities you identify while at client sites

• Opportunity for career progression, training and development

If you would like to know more, apply today as we’d love to hear from you!

Responsibilities

1. Perform engine inspection and maintenance
2. Troubleshoot, repair and/or perform engine overhaul onboard vessel or oil rig
   1. Test, measure and adjust engine system
   2. Recommend parts replacement

Requirements

1. Relevant trade certificate
2. Minimum 3 years’ relevant experience in diesel engine repairs and overhaul
3. Shipyard experience will be an advantage.

Responsibilities

1. Perform machine inspection and maintenance.
2. Troubleshoot, repair and/or perform machine and components’ parts overhaul
   1. Able to remove and install machines’ components
   2. Able to evaluate and recommend parts replacement
3. Troubleshoot engine, hydraulic and transmission systems.

Requirements

1. Minimum NITEC / Diploma in Mechanical / Electrical / Automotive Engineering
2. Minimum 5 years’ working experience on construction machinery.
3. Ability to troubleshoot electrical and electronic system will be an added advantage.
4. Basic computer literacy

Job Description:

· Support the Shift Leader in pre-commissioning, commissioning, greenfield start-up planning, punch listing, site walk and equipment inspection.

· Support the Shift Leader in handling start-up, shutdown, daily operation and plant turnaround activities.

· Perform routine production activities such as sample collections, in-process quality testing, plant patrols & data logging, chemical preparations, and loading & unloading of chemicals.

· Perform troubleshooting to resolve operational issues and provide support to technical and maintenance teams.

· Monitor and inspect equipment and instruments and when required, take corrective actions to maintain safe and optimal operation of the process plant.

· Prepare equipment for safe handover to maintenance.

· Read production schedules, shift logs, analytical results and technology team recommendations to determine changes to equipment control and process adjustments.

· Update operating procedures and prepare maintenance package documentation for equipment maintenance activity.

· Perform Permit to Work (PTW) job site risk assessment, and issue PTW to achieve safe work executions.

· Perform emergency response in areas of firefighting, rescue, and loss containment.

· Perform housekeeping in the process area.

· Support efforts to improve profitability, safety, and reliability of facility.

· Provide mentorship to junior technicians.

Requirements:

· NITEC or Higher NITEC in Chemical Process Technology, Chemical Technology or Diploma in Chemical Engineering with 1-3 years of relevant experience in the petrochemicals industry

· Recent graduates with strong academic results but without job experience may be considered too.

· Self-motivated and effective team player with good communication skills

· Basic understanding of industry HSE practices & process safety risks of petrochemical plants

· Proficient in Microsoft Office applications

· Able to perform 12 hours rotating shift work on Jurong Island

KEY DUTIES AND RESPONSIBILITES:

• Perform receipt of incoming raw and packaging materials.
• Maintain and update documents related to Delivery- Acknowledge, Goods Receipt Note along with supporting documents.
• Ensure that materials are kept as per the storage conditions.
• Perform dispensing and sieving of raw materials for production use.
• Perform cleaning of accessories used and the dispensing booth I area after completion of the dispensing / sieving activities.
• Issue packaging materials for packing use.
• To give the planned output dispensing and sieving of raw materials.
• Regularly verify physical stock, review against system stock and identify discrepancies.
• Perform performance checks for the weighing balances as required). Coordinate for calibration / preventive maintenance for all Warehouse equipment and instruments.
• Intimate and follow up with Maintenance department for breakdown rectification of Warehouse equipment.
• To ensure maintenance of Warehouse area and equipment in the state of cleanliness as per SOP.
• Assist in performing routine check and ensure proper cleaning of premises by contract cleaner.
• Assist in investigation in case of any process deviation, non-compliance.
• To carry out preventive and corrective actions for observed non-conformances.
• Assist in installation and qualification of Warehouse equipment.
• Ensure compliance to GxP /Safety/ HSE / Quality policies.
• To coordinate with QC for sampling of raw and packaging materials. Arrange sampling activity and cleaning of sampling booth.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Good understanding of safe working practices and cGMP.
• A good team playerwith positive learning attitude.
• Willing to work in Tuas area, in warehouse and dispensing environment.

EDUCATION & EXPERIENCE

• Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Warehouse/ Logistics or relevant disciplines
• Preferably with 3 years' relevant experience in pharmaceutical manufacturing warehouse/ store operation.
• Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

Responsibilities:

- To perform job assignments by selecting, using and maintaining various service tools correctly.

- To perform installation of electrical switches, sensors, transducers, transmitters, current transformers, alternator components, control panels, etc.

- To perform installation of engine wiring as accordance with the drawings provided.

- To disassemble and assemble engine components i.e. oil pump, water pump and cylinder head, etc.

- To perform engine valve lash adjustment.

- To assist and perform mechanical works i.e. installation of radiator assembly, couplings, engines, alternators, gearbox, piping, hoses, etc.

- To assist and perform alignment works for radiator assembly, engine and alternator installation.

- To prepare generators for load test.

- To perform safety devices test and load test including the recording of the required parameter readings.

- To perform ET tool connection onto engine to view diagnostic codes and events and file date.

- To perform troubleshooting on engines and generators when problems arises.

- Knowledge of Hydraulic Staring System, Marine Gearbox, AC Power Alternator, alignment, control panel and testing will of advantage.

- To perform general servicing on engines and alternators.

- IT knowledge will be of advantage.

- Programmable Logic Control knowledge will be of advantage.

Requirements:

- Possess an ITE or equivalent.

- Minimum 5 years of relevant hands-on experience.

- Electrical hands-on experience is a must.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 - S$50,000)

Perform and ensure safe and efficient day-to-day operations of oil movement area so that movement and blending of products are in accordance with specification.

• Diploma or NITEC in any Engineering/Science discipline OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE/Polytechnic engineering graduates are welcome to apply as training will be provided

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

(Annual Gross Salary: S$46,000 to S$50,000)

• Ensure safe and optimal operation of process units
• Ensure workplace safety by proper asset upkeep, supporting function testing on safeguarding system and proper control on work activities in the plant
• Participate in plant shutdown & start-up and process unit troubleshooting work activities

• Diploma or NITEC in Chemical Process Technology (Petrochemicals or Pharmaceuticals) OR
• At least GCE "O" level with credits in English, Mathematics, Science (Physics or Chemistry)
• Fresh ITE / Polytechnic engineering graduates are welcome to apply as training will be provided

Core Responsibility

· Install, repair, adjust, and maintain small electric or pneumatic control systems used for building. This includes heating, ventilation, air conditioning, and refrigeration systems and equipment.

· Conduct ongoing maintenance on building HVAC equipment to ensure proper operation of equipment and compliance with all applicable codes, regulations, and work safety.

· Troubleshoot equipment failures and determine the best course of action for equipment modifications.

· Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.

· Standby purposes on-site to be the first response for any incident.

· Routine checks on equipment to ensure proper functionality.

· To identify and raise to the Engineer if there is any faulty equipment.

· Be the hands-on person to carry out S&M / Repair

· Monitor chiller plant performance (kW/RT)

· Assist Engineer to carry out any works to optimize and maintain chiller plant performance.

· Ensure Service Reports for periodic S&M is properly documented and stored.

· Attend to any complaints by Customers

Requirement

· High School Diploma, GED, or trade school diploma with 3-5 years of job-related experience. In lieu of a diploma, a combination of experience and education will be considered.

· Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more.

· Ability to follow basic work routines and standards in the application of work.

Communication skills to exchange straightforward information

Royal IHC is currently recruiting a MARINE MECHANICAL ENGINEERING TECHNICIAN for our Singapore office.

Roles & Responsibilities:

• Maintenance and Repair: Perform routine maintenance and repairs on dredging equipment, including pumps and hydraulic systems, ensuring optimal performance and minimal downtime.
• Assembly and Disassembly: Assist in the assembly and disassembly of dredger components, adhering to safety and quality standards to ensure efficient operations.
• Troubleshooting and Diagnostics: Conduct thorough troubleshooting and diagnostic assessments on various dredger systems to identify and resolve mechanical issues promptly.
• Collaboration: Work closely with engineers and operators to develop and implement effective maintenance schedules and procedures.
• Workshop Maintenance: Maintain a clean and organized workshop environment, ensuring all tools and equipment are in proper working condition and readily available. Ensure the accuracy of the inventory stored in the workshop. Conduct safety inspections and ensure all maintenance activities comply with safety standards and regulations.
• Procurement Support: Support the procurement of spare parts and materials, maintaining inventory records and ensuring timely availability for repairs. Maintain accurate records of inventory and procurement activities.
• Documentation: Accurately document maintenance activities and repairs in accordance with company protocols and regulatory requirements.

Job Requirements:

• Proven Mi. 5 years of experience in marine mechanical engineering or Marine-Shipyard field.
• Strong troubleshooting and diagnostic skills.
• Ability to work collaboratively in a team environment.
• Excellent organizational and documentation skills.
• Positive mindset with a proactive, “sure I’ll get that done” attitude.

What We Offer:

• A dynamic and supportive work environment where your contributions matter.
• Opportunities for professional growth and development.
• Competitive salary and benefits package.

JOB DESCRIPTION

THIS IS A 2-YEARS RENEWABLE / CONVERTIBLE CONTRACT ROLE.

The Senior Technician/Technician – Centre Management System Support is responsible for ensuring all exhibits, audio-visual equipment, facilities, and essential services are available daily to support daily operations for centres/museums under Defence Collective Singapore (DCS), creating a safe, functional, and comfortable environment for employees, visitors, and customers.

RESPONSIBILITIES

• Daily Startup & Shutdown of Facilities, Exhibits, Attractions & Projection Systems.
• Maintenance and Repairs: Perform routine maintenance tasks, including plumbing, electrical, exhibition and gallery equipment, HVAC, and mechanical repairs to ensure the proper functioning of facilities and equipment.
• Building Systems: Monitor and maintain building systems such as heating, ventilation, air conditioning (HVAC), fire protection, and security systems to ensure compliance with safety standards and regulations.
• Contractor Coordination: Coordinate with external contractors, vendors and service providers for specialized repairs, installations, or renovations as needed. Supervise and inspect the works of contractors and the works of the service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set my DCS.
• Event Setup: Setup of logistics inclusive but not limited to AV Systems, Furniture, and equipment for events & daily organised visits.
• Inventory Management: Maintain inventory levels of supplies, tools, and materials needed for facility maintenance and repair activities.
  Recommend buying of critical spares and consumables for various facilities repair and improvement and participate in facilities improvement projects.
• Emergency Response: Respond to emergency situations, such as power outages, equipment failures, fire emergency/incidents or building damage, and implement appropriate measures to mitigate risks and minimize disruptions.
• Supervision and Leadership: Lead, supervise, and mentor a team of facilities technicians (interns & part-timers), providing guidance, training, and support to ensure high-quality service delivery.

REQUIREMENTS

• N-Level/O Level/ NITEC/ Professional Certificate.
• Preferable with 1 year working experience in similar roles. Fresh graduates are also welcome to apply.
• Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Familiarity with computerized maintenance management systems (CMMS) or facility management software for work order management and asset tracking.
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.w
• Physical stamina and mobility to perform manual labour, lift heavy objects, and work in various environmental conditions.
• Able to work on rotating shifts, weekends, and public holidays. Flexibility to work flexible hours, including evenings, weekends, and on-call shifts as needed, to address emergencies or urgent situations.

• German MNC
• Overseas training opportunity!!
• Biomedical industry
• Basic + Transport + AWS + VB

Location: East
Working hours: 655am to 305pm, Mon to Fri

Job scope:

• Perform 1st level troubleshooting on machine equipment
• Minimize equipment downtime
• Collaborate with engineers and production in continuous process improvement projects.
• Provide technical support for production operations in meeting output and quality.

Job requirement:

• Nitec/Diploma in engineering or related

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
Contact you about potential opportunities.
Delete personal data not required at this application stage.
To withdraw consent, email [email protected].
All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.


Poh Tze Qi (Kayley) | R2197837
ScienTec Consulting Pte Ltd | 11C5781

KEY DUTIES AND RESPONSIBILITES:

· Perform various activities and tasks required in the tablet and capsule final packing equipment.

· Operate all relevant equipment, clean, assemble and maintain the cleanliness of the equipment.

· Perform and maintain the documentation of operations in accordance with cGMP requirement.

· Operate the equipment appropriately in accordance with Standard Operating Procedure / batch document.

· Perform online monitoring of in process parameters / checks throughout the batch.

· Complete all relevant records and other documentation required for packing and related equipment in the work area.

· Perform all activities in accordance with cGMP.

· Maintain the cleanliness of work area to ensure cGMP compliance.

· Perform all other relevant duties required to meet the schedule.

· Check relevant material and product details against batch document.

· Co-ordination with Engineering for break down rectification of both primary and secondary packing lines

· Involve in equipment / process qualification.

· Participate in investigation of process deviation, cGMP and all other compliance related matters, where applicable.

· Ensure compliance with GxP / Safety / Quality policies.

REQUIREMENT

· Good understanding of safe working practices and cGMP.

· Experience in bottle or blister oral solid dosage packing is preferred.

· A good team player with a positive learning attitude.

· Willing to work in Tuas area, in cleanroom environment with full gowning.

EDUCATION & EXPERIENCE

· Minimum GCE 'O' level or NITEC or Higher NITEC or Diploma in Biotechnology / Biomedical / Mechanical / Mechatronics Engineering or relevant disciplines

· With 2-5 years of manufacturing experience in Pharmaceutical or related industries.

· Entry level NITEC / Higher NITEC / Diploma candidates are welcome to apply.

• $2500 - $3000
• 5.5 Days work
• 8am to 5pm, 8am to 12pm
• AWS + VB
• Working Location: Clementi

Responsibilities:

• Perform inspections, troubleshooting, and maintenance on a variety of marine equipment
• Diagnose and repair mechanical, electrical, and electronic issues
• Maintain detailed records and documentation
• Installs and repairs wiring, fixtures, and equipment for all electrical services aboard ship and in shipyard facilities

Requirements:

• Nitec in Electrical or similar
• At least 1- 2 years working experience in electrical repairs and maintenance
• Candidate possess LEW certificate with EMA or hold a valid Licensed Electrical Worker (LEW) certification is an added advantage

Interested applicants, kindly send your updated resume to +65 8288 5668 or Email to "[email protected]"

We regret that only shortlisted candidates will be notified.

EA Reg. No: R1222284 | Kelvin Soh

Job Scope:

• Perform routine repair and maintenance.
• Perform servicing and troubleshooting.
• Perform and assist in installation.
• Assist in ensuring timely execution of routinely scheduled maintenance.
• Conducting troubleshooting, fault diagnosis amd failure analysia to determine root causes of failture.

Requirements:

• Able to work in fast pace enviroement and self-independent
• Min N level/O level
• Min. 2 years of experience
• 6 working days

Mission/purpose of the Job:

• Responsible for vehicle repair, diagnostic, service maintenance.
• Ensure all assigned jobs are carried out according to UD/Volvo Quality Standards.

Key responsibilities/Accountabilities:

• To perform all basic troubleshooting and basic diagnostics with appropriate recommendations (With guidance from Team Leaders where appropriate)
• To check and provide correct recommended Parts details in the Work Order as and when required.
• To carry out Service Maintenance on the trucks including:

- Power Steering Diagnostics and Repair

- Engine Overhaul

- ESCOT Control Housing Overhaul

- ESCOT Gearbox Overhaul

- Rear Axle Overhaul

- Advanced Multimeter Measurements and Wiring Repair

- Emission Related System

- Fault tracing and repair electrical system via Tech Tool test, Calibrate and programming

• To perform all repairs (Mechanical, Electrical, Electronic etc)
• To ensure Utilization, Efficiency and Productivity is achieved.
• To record repair time and detail of repair in the Work Order.
• To keep Team Leader updated on the repair details and repair requirements.
• Adhere to Warranty Process and Procedures (Warranty tagging of parts, return and storage of warranty parts etc)
• Ensure good housekeeping of work bay.
• Accountable for all tools and equipment handling and usage.
• Ethical compliance of genuine parts replacement and service rendered according to the checklist and scope of works.
• Ensure all service and repairs are performed thoroughly and in accordance to good quality practice and procedures adhering to manufacturers standard 4 (Singapore).
• Lead by example to ensure high level of Health & Safety performance within the area of responsibility.
• Attend upgrading courses as and when available
• To attend to breakdown where necessary and to be equipped with a valid Class 3/4 driving license.
• Adhere to UD/Volvo processes and policies.
• Any other duties assigned by your immediate superior.

Essential educational and/or training qualifications and certificates

• NITEC in Automotive Technology or former NTC 3/2 in Motor Vehicle Mechanics or NTC 3/2 Heavy Duty Diesel Mechanics or Diploma in Automotive Engineering or related field.
• Preferred with valid Class 3 / 4 / 5 driving license (Singapore).

Preferred experience and knowledge

• Minimum of 4 – 6 years working experience in servicing and repairing heavy trucks (Japanese and Continental brands).
• Basic Vehicle Principles and Concepts.
• Advanced engine, transmission and brake system knowledge.
• Multi-meter basic electrical values.
• Knowledge in vehicle electrical circuit diagram.

Necessary technical/functional/language skills

• Basic Hydraulics
• Power Steering Diagnostics & Repair
• Brake System & Diagnostics
• Diesel Engine
• Electrical Wiring Repair
• Multimeter Advanced Measurements
• Engine Overhaul
• Emission Related System
• Preventive Maintenance
• Transmission check and adjustments
• Rear Axle Overhaul
• ESCOT Gearbox Overhaul, Control Housing Overhaul, Voith Retarder Overhaul
• Telematics
• Compressor cooling basic
• Computer skill
• Completed Curriculum and related Assessment for Technician Level III –Service & Basic Repair

• To perform general maintenance duties in building & machineries & equipments.
• To perform preventive maintenance on machines & equipments bt cleaning, lubricating, greasing etc for optimization.
• To perform minior electrical work not requiring licence such as office lighting, appliances etc.
• To apply paint or varnish all types of surfaces for protection
• Perform related duties as required such as external support or repair
• To assist in recording facility utilities.
• To carry routine inspections on all operating machineries & equipments
• To ensure all ad-hoc work are carried out

Minimum ITE with relevant fields

Able to work as a team

Efficient and adhere to KPI's given

Conform to WSH guidelines

Work at height certificate a plus

Reporting to: Manufacturing Supervisor

Roles & Responsibilities

• Operate assigned processing and/or packaging equipment according to the SOP, guides and manual
• Render correct cleaning and sanitation of processing equipment following Good Manufacturing practices
• Conduct checking and inspection of materials to ensure it meets specifications for processing and production of salts and dry part concentrates
• Prepare raw materials according to the plan and quality specifications
• Move raw materials and batch concentrate from staging area to processing area. This may require driving forktrucks and/or motorized and manual pallet stacker
• Perform product and packaged change over
• Perform SAP applications for transacting process order, good receipt and inventory
• Operate the system manually or with the aid of basic process automation
• Follow safe operation of dust collection system along with other Safety precautions and Safety criteria
• Perform Basic Equipment Care, troubleshooting and maintenance of the assigned machine to minimize inefficiency
• Perform 5S, routine cleaning for responsible areas
• Practice and adhere to current Good Manufacturing Practices (GMP), OE Eight (8) wastes and Continuous improvement (Kaizen) culture
• Perform Visual Management Board update, recording and documentation and maintenance of necessary operational records
• Ensure compliance with the Health and Safety Site System and ensure that a high standard of Health and Safety is always adhered to on site
• Any other ad Hoc duties and projects as assigned

Requirements

• Understanding of English Language, both written & spoken
• Ability to communicate effectively with all team members
• NITEC Certification or equivalent preferred
• Minimum 3 years of technical experience in F&B industry would be preferred
• Basic working knowledge in the production operations