Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support on maintenance project.
• Responsible for handling system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.

Requirements

• Min Diploma in Electrical/Electronic Engineering, Computer Science/ Information Technology or equivalent.
• Min 2 years of working experience in managing LAN / WAN / Routers / Switches / DNS / Firewall and Milestone System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

(Hiring for new branch at BUKIT BATOK area)

IF YOU ARE looking for...

• Career advancement with work-life balance;
• Substantial flexibility in workplace;
• Creative performance bonus;

Responsibilities:

• Serve as one of a key contact for machine installation and services;
• Assist on technical training to customers;
• Excellent communicate skills to interact with suppliers and customers;
• Solid technical knowledge to provide professional solution on customers’ inquiries;
• Other Ad-hoc duties as required by the superior;

Requirements:

• Obtain min. Diploma in Engineering (any fields) or equivalent;
• Someone without relevant working experiences also welcomes to apply as on-job training will be provided;
• Pro-active, possess technical and problem-solving skills with attention to details;

How to apply,

Please submit your application together with your comprehensive resume, not limited to the education background, career history (if any), current and expected salary(if any), and availabilities to commence work by ‘Apply’ the link.

(We regret to inform you that only shortlisted candidates will be notified)

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

What You Will Do:

• Under the supervision of an experienced engineer or engineering manager, performs detailed engineering review of plans as assigned for compliance with applicable Rules, Regulations and contract commitments.
• Performs work which involves conventional engineering practices but may include moderately complex problems such as the resolution of conflicting design requirements, material standards or coordination of activities among other disciplines.
• Drafts technically accurate and timely reports, and responses to client letters, faxes and other forms of communication for review by an experienced engineer or engineering manager.
• Prepares accurate and timely weekly reports and billing on all work performed.
• Communicates the status of the current workload to all appropriate members of the team to ensure the needs of the clients will be met.
• May propose technical advice to field operations and other technical offices.
• May propose new approaches to problems encountered and make recommendations for changes in methods, procedures or designs.
• May work directly with clients to identify and resolve problems in the area of technical expertise.
• Works as a team member within the group. May work autonomously, once trained, with minimal supervision.
• Implements and maintains ABS Quality System requirements relative to responsibilities after undergoing ABS Quality System training.

What You Will Need:

Education and Experience

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering, Marine, Mechanical, or Electrical Engineering, or other related disciplines; an M.S. is preferred.
• Graduate from University and a minimum of five (5) years of related industry experience.
• Preference for graduates from a marine-industry-recognized college or university.
• Experience in international business and technical processes, as well as international requirements and problem resolution, is necessary.
• International experience or knowledge of international business and related technical processes, requirements, and problem-solving skills.

For those with Hull backgrounds

• B.S. degree in Civil, Structural Engineering, Naval Architecture, Ocean Engineering or other related disciplines; an M.S. may be preferred.
• Demonstrated computer literacy in engineering software.
• Exposed to Finite Element Method (course work or supervised research).
• For those with seven (7) years or less Machinery backgrounds or experience
• B.S. degree in Marine, Mechanical or Electrical Engineering or other related disciplines.

For those with Machinery backgrounds

• Seven (7) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society or
• Seagoing engineering license or professional/chartered engineer license and four (4) years or more of related engineering experience in a shipyard, design/consulting office, shipping/oil company, or a classification society.

Knowledge, Skills, and Abilities

• Knowledge of related technical disciplines required.
• The ability to identify, analyze and propose solutions to problems (i.e., the competence to demonstrate complex problem-solving skills).
• Good command of the English language.
• Ability to communicate orally and in writing.
• Ability to work well with others.
• Familiarity with the ABS Health, Safety, Quality & Environmental Management Systems (internal candidates only).

· Position: Sales Engineer

· Location: Ubi

· Working Hours: Monday to Friday (office hours)

· Salary (commensurate with experience): Up to $5,000 Basic Salary + ATTRACTIVE Commission + Transport Allowance + Performance Bonus

· Duration: Permanent

· Industry: Machinery

Main Responsibilities:

· Manage existing customers and develop new customers and foster good customer relationship for revenue growth and customer retention

· Provide pre-sales assistance and after-sales support to customers

· Prepare quotations and follow up on sales enquiries/proposal from customers

· Prepare sales visits, maintain customers contact database and update project status/activity reports on weekly basis

· Support marketing activities in seminars, trade shows, conferences, and other marketing events

· Deliver presentations and hands-on demonstrations of products, applications, and technology for the purpose of product sales

· Able to analyse competition market/data

· Any other ad-hoc duties assigned

Requirements:

· Bilingual in English and Mandarin to liaise with Mandarin speaking associates in view of business communications

· At least Diploma in Electrical Engineering/Mechanical Engineering or Mechatronics

· Minimum 2 years of working experience in industrial electrical/mechanical component sales

· Prior experience with automation & motion control

· Proficient with Windows based applications (Word, Excel, PowerPoint)

· Full product training is provided

Email to: [email protected]for more information.

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Associate Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

JOB DESCRIPTION

l Prepare basic design document including system study report, heat balance, piping and instrument diagram, equipment data sheet, etc. of power plant

l Independently handle kinds of Package equipment ; GTG(gas turbine generator), STG(steam turbine generator), boiler, HRSG(heat recovery steam generator), water treatment package, wastewater treatment package, surface condenser, nitrogen generator unit, cooling tower, chemical dosing unit, etc.

l Take the lead in the preparation of inquiry packages, in the technical clarification/evaluation of Vendor’s technical offers, and in the kick-off meeting/pre-inspection meeting with an inter-discipline collaboration.

l Prepare technical specifications including package equipment data sheets, detail design documentation & Inspection/Procedure documentation requests for Package equipment as shown the above.

l Prepare technical bid evaluation and clarification with Vendors for technical confirmation for package equipment as show the above.

l Review of the vendor packages and follow up on the required approvals.

l Prepare interface list for package and client requirements

l Follow up of all engineering issues for module engineering and close any outstanding issues as promptly as possible.

l Review / approve vendor documents in line with client / contractor’s requirements.

l Attend project meeting / follow up meeting with vendors, client, third party etc.

l Witness factory acceptance tests (FATs) along with client / contractor’s requirements.

l Assist construction team during module fabrication, equipment installation, and assist the pre-commissioning and commissioning team during yard testing.

l Assist procurement team as required during the ordering stage.

l Have skill of combined cycle system analysis software (GT pro. and Master) and calculation program of steam/water condition (steam calc.)

l Have skill of DX tools such as data analysis software (Grafana and Tableau), document search software (Goldfire), Microsoft 365 and document revision analysis (Middle)

l Have made programs and been used inter discipline, e.g., combustion calc., acid due point calc., HRSG and condenser heating surface calc., chemical dosing calc., piping pressure drop calc., coal characteristic analysis, etc.

Have experience as a lead engineer more than 35 years for large scale project for oil & gas project, petrochemical project and refinery project each project with more than 3,000 drawings.

l Have knowledge about applicable international codes such as ASTME, ASTM, EN, BS, VGB, ISO, IEC, NFPA, API, JIS, Gost and GB

Qualifications:

Bachelor’s Degree in Mechanical Engineering

At least 8years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant.

l Bachelor’s Degree in Mechanical Engineering

At least 40 years of experience as Design Engineer in Mechanical Engineering of Oil & Gas Plant, Petrochemical and Refinery, and in Basic Engineering of Power Plant

JOB DESCRIPTION:

- Pressure vessel and tank design in accordance with ASME Boiler & Pressure vessel Code section II, VIII (Div.1 & 2) and IX, API 650 TEMA, JIS B8265 and JPI.

- Take the vendor’s technical quotation review, clarification and evaluation, leading the kick-off meeting/design review meeting, supporting the pre-inspection meeting, coordinating with other disciplines (Project, Process, Civil, Piping, Electric, Instrument, Transportation, Construction, etc.).

- Prepare Requisition including basic technical requirements, detail design requirements, general documentation requirements, inspection and procedure requirements, etc.

- Evaluate performance of vendor’s design equipment such like plate heat exchangers, filters, drum, etc.

- Review vendor package design including 3D model (Navis Works) and follow up on the required approvals.

- Review / approve vendor documents in line with client / contractor’s requirements.

- Follow up of all engineering issues and close any outstanding issues as promptly as possible.

- Monitor and control vendor’s document submission status. Expedite vendor if any delay.

- Coordination with vendors and global project disciplines for the proper execution of the project.

- Attend project meeting / follow up meeting with vendors, client, third party etc.

- Review thermal rating result of shell & tube heat exchangers in performance point of view.

- Discuss technical issue in design review meeting with vendor to close comments of vendor documents for equipment including package items.

- Assist site team during construction and commissioning stage

- Conduct trouble shooting, investigate root cause, propose countermeasure.

- Assist procurement team as required during the ordering stage.

- Vendor qualification work including check of Design/QAQC/Fabrication capability, vendor’s experience, fabrication sequence & typical schedule, work load, etc.

JOB REQUIREMENTS

- Master’s Degree in Mechanical Engineering.

- More than 5 years of experience as Design Engineer in Pressure Vessel Engineering field in Chemical Plant

- Work experiences at Chemical Plant site in Singapore as field engineer for 6 months and worked for pre-commissioning/progress monitoring for Static equipment and equipment preservation. Communication with vendor supervisor.

- Inspection experience of Static Equipment (Carbon Steel Drum, Stainless Steel Drum and FRP Tank etc.) at vendor’s shop.

- Contribution as a lead engineer for static equipment design for any types of projects such as feasibility study, FEED, EPC and proposal work also.

- Communication with global office engineers.

- Strong engineering knowledge in static equipment for high pressure/temperature, various materials types (carbon steel, stainless steel, duplex stainless steel, etc.), various material constructions (clad/weld overlay/lining/mono-wall/multi-wall), welding including tube-to-tube sheet and dissimilar welding.

- Familiar and aware of collaboration between inter-discipline engineering activities.

- Attendance of 2-weeks Welding Training at Hitachi Zosen Corporation in Kumamoto, Japan, experience of actual welding work (SMAW, SAW, FCAW, TIG) and non-destructive examination for weld joint (PT, MT, UT, RT).

- Speaks and write proficent English and Japanese

Responsibilities:

• Assists Project Manager in project planning and to co-ordinate and oversee all work on the site.
• Study drawing, plans, specification and scope of work.
• Responsible for submission of material sample and shop drawing.
• Monitoring closely of construction work progress, materials, plant and equipment.
• Carry out site visit, attend site test and inspection and temporary work.
• Workout and maintain VO schedule.
• Verification of material requisition and taking off quantities/site measurement.
• Prepare progress claim to Main-contractor on monthly basis.
• Prepare payment certificate, verify sub-contractor work progress.
• Ensure quality standard and Safety Requirements are adhered to.
• Work closely with project team and resolve all technical issue.

Requirement:

• Diploma in Engineering / equivalent.
• Min. 3 years ACMV work experience in M&E construction industry is Preferred.
• Able to handle multiple projects simultaneously.
• IT skills in Microsoft office, Autocad.

Please include the following information in your resume:

• Education background
• Working experience
• Reason of leaving current and past employment
• Current salary
• Expected salary
• Notice period

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Key Accountabilities:

Technical requirements:

Understands the specifications and requirements in the area of mechanical rotating equipment (such as centrifugal pumps, positive displacement pumps and others) within the assigned package. - Responsible for mechanical design and selection of rotating equipment in accordance with applicable international codes according to ITB or relevant specification.

Engineering document preparation:

Under minimum guidance, prepares technical specifications/standards and requisitions.

Supplier selection:

Under minimum guidance, evaluates the technical and engineering aspects of bids received from suppliers and gives assessment to the senior engineer.

Supplier management:

Assists in placing and executing the orders. For approval, reviews submitted from suppliers’ documents (such as data sheets, drawings and procedures) for their fabrication and compliance. To be a focal point, communicates and coordinates with stakeholders.

Support for other discipline:

Provides technical/engineering support/visit and cooperates for raising the quality level at fabrication shop and participated in construction / commissioning work at site under guidance by the lead/senior engineers.

Technical issue resolution:

With minimum guidance, resolves technical issues using acquired knowledge during the execution of engineering stage, fabrication stage and post-delivery.

Compliance with HSSEQ policies:

To ensure business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behavior.

Qualifications:

- Bachelor Degree in Engineering

- Minimum 5 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in off-shore application

- Possess relevant experience working on EPC projects

- Familiar with International Industry Codes such as ASME, API etc

-Able to speak and write proficient Eng and Jap has an addtional advantage.

Technical:

- Advanced Microsoft Office

- Intermediate AutoCAD

Leadership

- Communication skills

- Adaptability

- Ability to translate business information to technical requirements

Work Conditions

Most of the working time is in the office. Engineers can be sent to suppliers’ s sites/offices and project sites including Offshore for construction and commissioning support.

Responsibilities

• Responsible for designing and developing windows applications in .net technologies mostly used for manufacturing equipment
• Responsible for developing solutions to improvise performance & scalability of systems
• Responsible in full system development life cycle
• Responsible for conducting applications training and handle enquiries for technical issues
• Responsible for supporting on site installation, debugging and hand technical support

Requirements

• Min Diploma in Information Technology or related
• Min 2 years of working experience in C#, C++, .Net
• Experience in developing windows Based application

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Assists Project Manager in project planning and to co-ordinate and oversee all work on the site.
• Study drawing, plans, specification and scope of work.
• Responsible for submission of material sample and shop drawing.
• Monitoring closely of construction work progress, materials, plant and equipment.
• Carry out site visit, attend site test and inspection and temporary work.
• Workout and maintain VO schedule.
• Verification of material requisition and taking off quantities/site measurement.
• Prepare progress claim to Main-contractor on monthly basis.
• Prepare payment certificate, verify sub-contractor work progress.
• Ensure quality standard and Safety Requirements are adhered to.
• Work closely with project team and resolve all technical issue.

Requirement:

• Diploma in Engineering / equivalent.
• Min. 3 years PSG work experience in M&E construction industry is Preferred.
• Able to handle multiple projects simultaneously.
• IT skills in Microsoft office, Autocad.

Please include the following information in your resume:

• Education background
• Working experience
• Reason of leaving current and past employment
• Current salary
• Expected salary
• Notice period

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for developing of test scripts, issues tracking and test management
• Responsible for conducting qualification test of new product or revised component with issuing of test report and recommendations to the test findings
• Responsible for testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)
• Responsible for preparation of samples and coordinate with PQS EN or certification bodies for product certification
• Responsible for evaluating and analysis of competitors’ products – teardown analysis, VA/VE

Requirements

• Min Diploma in Engineering or relevant
• Min 2 years of working experience in production quality or test lab.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

We are looking for a research engineer / fellow to help us develop a novel design for a blast door system as part of an industrial research project developing. The results of this project will be used in projects throughout Singapore. It is our aim to include all the door components in the analysis, making this a holistically developed solution.
The research will be conducted using numerical simulations, experiments and analytical solutions. The successful candidate will have a chance to acquire in depth experience in all these aspects of protective research and design.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Be responsible for these technical deliverables:Develop models of the door system using advanced finite element software.
  Plan and conduct blast testing of the proposed solutions.
  Conduct laboratory tests of components as needed.
  Develop analytical models for fast design.
  
• Carry out Risk Assessments and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaise with vendors/suppliers.
• Work independently, as well as within a team, to ensure the achievement of the project objectives and proper operation and maintenance of equipment.

Job Requirements:

• Have a basic knowledge of structural dynamics.
• Have a degree (preferably Master’s or PhD) in mechanical engineering, electrical / electronics engineering or related domains.
• Knowledge of blast and shock loading theory and applications would be advantageous
• Knowledge of non linear materials modelling would be advantageous

Key Competencies

• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work
• Have some experience in the use of advanced FEM analysis. This could include experience in ABAQUS, LS-Dyna, Radioss or equivalent software.
• Able to support other related laboratory tasks as needed
• Willing to learn new skills as needed for the project

Responsibilities

• Responsible for designing and developing software for automated semi-conductor process equipment.
• Responsible for improving equipment performance through CIPs and other development initiatives
• Responsible for supporting field work to upgrade and resolve customer issues.

Requirements

• Min Diploma in Electrical & Electronics Engineering/Computer Studies or equivalent.
• Min 5 years of working experience in programming on Windows (XP and above) environment.
• Experience in C++, VC++, MFC, SQL, OOP, using Servo, Stepper Motion Controller, Analog Device and High Speed I/O
• Knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026