• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 4 years of civil engineering experience
• Min 2 years of experience in geotechnical, D-wall and deep excavation works
• Degree in Civil Engineering
• Accredited as a RE with IES

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Job description;-

· Commissioning, Maintenance, Repair & Troubleshooting of marine electrical & mechanical equipment onboard vessels and in company premisses/workshop (i.e. Burners, Boilers, Scrubbers, EGE, EBG, GCU and supporting systems).

· Ability and willingness to travel on short notice onboard vessels in region, but occasionally also globally.

· Employees must have ready valid travel documentation, passports, visas, seaman book and vaccinations as required to travel.

· This is full time position, and we welcome experienced candidates of all ages.

· Ensure that the work is executed according to the company’s Quality, Health, Safety and Environment guidelines and customer site procedures and report unsafe practices and incidents.

· Write Service Certificates (time sheets) on site and get them signed by customer.

· Write Service Reports with full details of job done, warn customer on possible safety issues, spare parts required/suggested and giving suggestions & recommendation of future services.

· Proactive recommendation of required/suggested spare parts to Customers.

· Communicate sales opportunities to Service Managers.

· Provide on site and remote technical support to clients.

· Conduct training for Junior and Trainee Service Engineers and provide Technical Support

Required skills:

· Preferred experience with Boiler & Burners systems, Scrubbers, but it is not mandatory.

· Troubleshooting skills in electrical, electronic & mechanical systems.

· Basic programming skills of PLC (Programmable Logic Controllers).

· Basic parametrisation knowledge of industrial & marine controllers.

· Experience in automation, control and instrumentation devices, pumps, electrical motors, frequency converters, actuators, positioners, …

· Proficient skills in MS Office.

· Fluent written and spoken English.

· Cross cultural awareness.

· Structural and systematic approach when executing tasks.

· Attitude to provide high quality of work results.

· Good communication skills.

· Team player mindset with attitude to share knowledge and experience with Your colleagues.

· Customer oriented approach with effectively prioritizing and executing tasks with clear customer communication with no prestige attitude.

You will be responsible for the design and development of digital circuit using BiCDMOS process for chip used in automotive, Industrial Battery management system.

You will work within a group of design experts interfacing with layout, overseas design teams to create detailed specifications, innovative designs to meet the technological requirements, achieving sales and ultimately doing our part for empowering electrification of vehicles and enabling Metaverse; contributing to achieve carbon neutrality for our future generations.

Key responsiblities:

• Planning and designing IC block or system architecture based on design requirements
• RTL code level development and simulation verification
• Prepare and discuss circuit, results of design in design reviews
• Support Synthesis, place & route and timing closure of digital circuits
• Design For Testability (DFT); test-modes design
• Check post layout verifications (timing, functional, power consumption)
• Support to one chip designers to integrate total analog and digital one chip design
• Mixed signal simulations and high-level system modeling of analog blocks for one chip verification simulations
• Conduct IC verification on bench to check IC performance with respect to design
• Work with application engineers to support customer application issues

Requirements:

• Good PhD/Masters/Bachelor’s Degree in Electronics/Electrical Engineering equivalent.
• Experience in developing digital circuit proficient in digital design tools usage (Cadence/Synopsys)
• Competent in digital design flow (RTL coding & Simulation, Synthesis, Timing Analysis and Clock Tree Generation, DFT, Place and Route and etc)
• Competent in different digital design tools and languages (VHDL and/or Verilog and etc)
• Knowledgeable in Behavioral Modelling in VHDL/Verilog_AMS will be an added advantage
• Knowledgeable in Mixed-Signal Design and Simulation will be an added advantage
• Silicon debugging skill to solve design issues
• Good communication skills and ability to work in a team
• Preferred 3-5 years of digital IC design experience. Candidate with relevant design experiences will be considered.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

• Assist in all AC jobs/projects/contract
• Review all the design/checking of calculations for the company
• Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents
• Act on behalf of the company to maintain reputation and goodwill with the clients
• Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects
• Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects
• Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients
• Promote the employer’s profile and capabilities in the procurement of projects and business development
• Be a management representative of the company for both site and office projects
• Review the design/checking of calculations
• Carry out planning, design drafting, cost estimate etc for the company’s project
• Prepare proposal and performance on tendering works for Consultancy
• Oversee authority’s submission and update of each project
• To cover duties for other Senior/ Design engineers
• Assist in technical design and drafting
• Any other ad-hoc duties as assigned by superior

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Supervise ongoing projects and assist in design office i.e. resolve all technical issue

· Assist in all AC jobs/projects/contract

· Review all the design/checking of calculations for the company

· Represent the company, advise the same and act on its behalf to enable the company to perform its contractual obligations for the projects, as spelt out in the contract documents

· Act on behalf of the company to maintain reputation and goodwill with the clients

· Assist the Managing Director in subsequent tendering of projects and other contracts including but not limited to government projects, private projects, overseas projects

· Attend all site meetings with clients, contractors, QP Design and relevant authorities on matters related to the projects

· Attend meetings with Managing Director on regular basis with the view to report on matters related to the projects and assist in the resolution of issues which may affect the performance of the company in discharging its contractual obligations to the clients

· Promote the employer’s profile and capabilities in the procurement of projects and business development

· Be a management representative of the company for both site and office projects

· Review the design/checking of calculations

· Carry out planning, design drafting, cost estimate etc for the company’s project

· Prepare proposal and performance on tendering works for Consultancy

· Oversee authority’s submission and update of each project

· To cover duties for other Senior/ Design engineers

· Assist in technical design and drafting

· Any other ad-hoc duties as assigned by superior

Criteria:

• Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognized by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on Civil & Structural projects
• Able to problem solve and manage projects

• Ensure efficient Civil & Structural and Geotechnical & viaduct design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical & viaduct design matters and advises the Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/Project Manager (PM) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical & Viaduct submission and assists the SPM/PM in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and to provide technical support as required in the evaluations of Contractor's claims
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirements

• Minimum Degree in Civil/Structural Engineering or equivalent
• Candidates with contractor's (main/sub) experience are welcome to apply.

• Together with the QP(S), provide overall team direction and management to realise the project objectives and activities as required by the Superintending Officer and consultants, ensuring that the project is delivered to the highest technical and safety standards
• Review Contractors’ proposal, method statements and designs
• To assist QP(S) and QP(Geo) in reviewing the construction proposals and implement supervision oversight of these construction works carried out by the Contractors
• Lead the RTOs to check all drawings (including shopdrawings, construction drawings) and specifications for discrepancies
• Overview of the quality system implementation, materials approval and compliance testing procedures
• To provide overview of WSH and aerodrome safety management systems and risk analyses and implementation of safe working practices on site
• Carry out any other duties related to the Project, including administrative tasks as directed by the CAG

Requirements

• The RE-Geotechnical shall have minimum five (5) years of relevant experience as a geotechnical engineer, of which at least three (3) years shall be in supervision of works in bored piling and temporary works such as haul road and temporary drainage diversion, ERSS, excavation works, ground improvement works, flood prevention and mitigation
• The RE- Geotechnical shall possess a Geotechnical engineering degree recognised by the Professional Engineers Board of Singapore
• The RE- Geotechnical shall be accredited with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Careers That Change Lives

Engineers are indispensable to achieving our Mission. That’s why we empower you to bring the best of your experience to bear on our market-leading portfolio of innovations. Apply your existing skills and develop new ones, with the training, mentorship, and the guidance you need to continue to develop your expertise. With roles in specific business units, as well as at the corporate level, you’re sure to find an opportunity to make an impact that’s right for you.

Today, we’re partnering across the industry to confront systemic healthcare challenges – this requires bold leadership. If you want a challenging, energizing, rewarding career that changes lives, join us. Help us bring the next generation of life-changing medical technology to patients worldwide.

A Day in the Life

• Quality Improvement Projects across the sites:Lead and execute improvement projects related to manufacturing quality. Collaborate with cross-functional teams to identify areas for enhancement.
  Drive strategic initiatives aimed at elevating product quality and compliance.
  
• Core Competency Development in Quality organization:Establish and strengthen the Quality Engineering (QE) core competency within the organization.
  
  Knowledge Transfer and Teaching:Effectively transfer quality concepts and best practices to team members.
  Mentor and coach junior engineers in quality methodologies.
  Expertise in Process Validation, Process Monitoring / Statistical Process Control (SPC),Test Method Validation (TMV, Risk Management. Data analysis and Critical Thinking
  
• System Understanding:Gain a deep understanding of how the system supports various processes within the organization.
  Leverage this knowledge to drive continuous improvement.
  
  Decision-Making Authority:Make informed decisions related to quality processes and improvements.
  Serve as a consultant for critical quality-related choices.
  
  Continuous Improvement:Continuously improve existing processes and systems.
  Develop and implement innovative solutions to enhance quality outcomes.
  
• Technical Mastery:Stay abreast of global quality excellence programs, industry trends, regulations, and advancements.
  Be a technical expert in quality engineering practices.
  

Must Have:

• Bachelor’s degree required
• Minimum of 6 years of relevant experience

Your Profile:

• Bachelor’s degree in Engineering or related field (Master’s preferred)
• Certified Quality Engineer (CQE), Certified Quality Process Analyst or equivalent would be an advantage
• Six Sigma Green Belt certification would be a plus
• Significant experience in quality engineering, preferably in the medical device industry
• Strong analytical skills, attention to detail, and problem-solving abilities

About Medtronic

Together, we can change healthcare worldwide. At Medtronic, we push the limits of what technology, therapies and services can do to help alleviate pain, restore health and extend life. We challenge ourselves and each other to make tomorrow better than yesterday. It is what makes this an exciting and rewarding place to be.

We want to accelerate and advance our ability to create meaningful innovations - but we will only succeed with the right people on our team. Let’s work together to address universal healthcare needs and improve patients’ lives. Help us shape the future.

Physical Job Requirements

The physical demands described within the Responsibilities section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. For Office Roles: While performing the duties of this job, the employee is regularly required to be independently mobile. The employee is also required to interact with a computer and communicate with peers and co-workers. Contact your manager or local HR to understand the Work Conditions and Physical requirements that may be specific to each role.

Description

PRINCIPAL DUTIES AND RESPONSIBILITES

• General Scope:

o Provide on-site technical support for PCs (software and hardware), voice equipment & mobile device (Smartphone and Tablet)

o Physically set up computers and software system installation

o Perform basic hardware moves and changes

o Record and manage all incidents and requests in ticket-tracking system

o Ensure timely resolution of issues by acquiring necessary information to best measure impact to the customer

o Develop and update new and existing process

o Proactively inform management of trends, significant problems and expected delays

o Provide other IT-related support as required by the business

o Documentation of products support and processes

o Update and manage inventory on new incoming hardware orders

o Communicate with vendors for incoming hardware orders and repairs

• Project Focus:

o Resource will need to assist users to migrate BYOD (Bring your own device) to CP (Corporate phone) where device platform includes iOS and Android

o Support includes but not limited to, assist user to setup new phone, troubleshooting during migration, get user sign off to show work completion, inventory tracking and reporting

Qualifications

LANGUAGE

• English: Advanced level - strong verbal, written, listening communication experience

EXPERIENCE

• 2 to 5 years of IT support experience

• Solid understanding of PC hardware/peripherals

• Exposure of mobile OS such as Apple iOS and Google Android

• Good working knowledge and IT experience supporting Microsoft Windows configuration, desktop administration, Microsoft Office suite

• Basic understanding of network and server-side infrastructure

• Experience in delivering superior customer service experience

SKILLS

• Ability to make sound decisions following approved procedures in a fast-paced environment

• Ability to effectively manage multiple tasks occurring simultaneously

• Ability to work independently with little supervision

Working Hours Coverage

COVERAGE HOURS

· Monday to Friday

· 9:00 – 18:00

· 8 working hour per shift defined by team manager within coverage hour above

· Extreme weather WFH/remote coverage

PAID OVERTIME WORK

· Required occasional non-office hours (weeknight, weekend & Holiday) paid overtime work on team rotation basis

• Overall project planning, schedule and executing the delivery of projects within time, budget and Client’s

expectations.

• Monitoring progress and identifying critical activities to expedite smooth progress of works on site to meet

targets

• Preparing cost estimates and ensuring appropriate materials and tools are available

• Providing technical advice and suggestions for improvement on particular projects

• Diagnosing and troubleshooting equipment as required.

• Negotiating with suppliers and vendors to ensure the best contracts.

• Authorizing technical drawings and engineering plans.

• Attend technical meeting with authorities and consultants

• Ensuring environmental, safety, and health practices are carried out at all times

Responsibilities:

· Identify new market opportunities and generate new sales leads

· Follow up on sales funnel and ensure successful completion of projects with prompt customer service and satisfaction

· Plan and develop sales plans to achieve sales objectives & monthly sales target

· Manage entire sales cycle from pre-sales discussion with customers, prepare quotations, negotiate orders, contract review to post-sales support

· Develop and conduct presentations explaining products and provide product knowledge to new and existing clientele

· Provide technical & sales support to key clientele like Architects, Lighting Consultants, Interior Designers, Landscape Designers and M&E Consultants

· Maintain and develop trusting long-term relationships with new and existing customers through understanding their business activity and needs

· Promote and represent the company professionally at trade exhibitions, events and product demonstrations

· Prepare reports and forecasts as and when requested by the management in a timely and accurate manner

Requirements:

· Minimum Diploma in any Electrical/ Electronic/ Mechanical/ Building Engineering

· 3-5 years of relevant working experience

· Lighting experience is not necessary but would be an asset with experience in lighting control

· Strong passion in sales and highly driven to achieve targets

· Enjoy working with a dynamic team and able to work confidently in a fast-paced environment

· Meticulous and ability to multi-task with good organisation skills

· Possess strong interpersonal, communication, presentation and negotiation skills

· Good problem-solving skills and ability to work as a team

** 5-day work week

** Shuttle Bus Service provided at Ang Mo Kio / Yio Chu Kang MRT

Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.

Make the Best You.

Working at Honeywell is not just creating incredible things. You will have the opportunity to work with our talented and friendly team of professionals and be part of a global team of future shapers.

Join Us and Make an Impact.

As a Field Service Engineer at Honeywell Singapore, you will play a crucial role in the on-site installation, servicing, and repair of complex equipment and systems. This position requires a blend of technical expertise, customer-facing skills, and a commitment to continuous improvement in field service processes and product development.

Key Responsibilities:

Support On-Site Installation and Repair:

1. Lead the development and refinement of processes for the installation, servicing, and repair of complex equipment on customer sites.
2. Ensure high-quality technical standards are maintained during all on-site activities.

Technical Presentations and Training:

1. Deliver technical presentations to customers, industry peers, and competitors.
2. Contribute to the creation and revision of work instructions and customer-facing training guides.
3. Educate customers and field technicians to ensure a comprehensive understanding of our products and services.

Documentation and Communication:

1. Write and maintain clear, concise documentation used by field technicians.
2. Utilize excellent written and oral communication skills to effectively convey information.

Continuous Improvement Initiatives:

1. Drive initiatives aimed at improving processes related to field services and product development.
2. Actively seek feedback and implement strategies for service enhancement.

Cross-Functional Support and Escalation Management:

1. Work with cross-functional groups to resolve administrative issues related to equipment delivery and installation.
2. Serve as an escalation point for Field Service Specialists, Service Engineers, and other stakeholders to ensure swift resolution of complex issues.

Customer Service and Delivery:

1. Validate customer requests and ensure the Right and Fast Delivery of services. Uphold a commitment to excellent customer service throughout all service activities

MUST HAVE:

• Major in Chemical Engineer, Electrical Engineering, or Instrumentation Engineering.
• Internship and/or relevant experiences in Oil & Gas, Petrochemical, Process Plants.
• Ability to work with clients in Jurong island area.
• Ability to standby and support upon request.
• Excellent written and oral communication skills.
• Ability to provide quality documentation and effective training materials.
• Ability to deliver high-quality presentations.

WE VALUE:

• A proactive approach to problem-solving and process improvement.
• Team players who can collaborate effectively with diverse groups.
• Individuals who are passionate about delivering exceptional customer experiences.

​

About Us

The world is changing. And it’s a familiar story at Honeywell. Our $36 billion business was founded on a legacy of firsts spanning 130 years. We’re building a safer, smarter, and more sustainable world through our technology and software across each of our 930 sites globally. Our impact is seen in every shape and size around the world. Our solutions are felt daily in aerospace, buildings and cities, retail, chemicals and materials, safety, industrial and manufacturing, safety, and supply chains.

Discover More

We’ve been innovating for more than 100 years and now we’re creating what’s next. There’s a lot more available for you to discover. Our solutions, our case studies, our #futureshapers, and so much more. Learn more at careers.honeywell.com/us/en/

If you believe what happens tomorrow is determined by what we do today, you’ll love working at Honeywell.

The future is what we make it. So, join us and let’s do this together.

Job Description:

• Perform in-house and onsite system maintenance tasks related
• Able to do troubleshooting for both hardware & software
• Able to support engineering department activity, daily operation and ad-hoc tasks
• On job training provided
• Willing to be deployed overseas to support maintenance work as required

Requirements:

• Minimum Diploma in Engineering or related technical field with 2 years experience
• Preferably possess Class 3/3A Vehicles license
• Positive attitude and able to work with cross functional teams
• Candidate without prior experience will also be considered
• Able to perform 24/7 standby
• Only Singapore citizens need apply

At FLEXXON, we foster a culture of innovation, creativity, and inclusivity. You'll have the opportunity to work alongside talented individuals who are passionate about making a difference. We offer a dynamic and supportive work environment that encourages professional growth and recognizes your achievements.

If you are excited about the prospect of taking on new challenges, making an impact, and contributing to the success of our products, we would love to hear from you.

Responsibilities:

• Present product and solution in response to customer enquiries and problems
• Market research, analysis and competition to formulate product strategy
• Design and manage product communications including external and internal feature announcements, use case, reference materials and press releases
• Manage storage products, and responsible for the whole process from demand, spec, design, development, testing to mass production
• Analyze, troubleshoot and resolve issues.
• Work with R&D and other cross-functional counterparts to drive development of advanced features and technology

• Degree/Diploma in Electronics Engineering, Computer Engineering, Microelectronics or related major
• Good presentation and communication skills, excellent in written and spoken English and Chinese
• 3-5 years of product or project management experience
• Familiar with Windows and Linux operating system preferably, if have
• Ability to work independently and as a team, with strong analytical and multitasking skills

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Senior Frontend Engineer (React/Typescript)

Internal Code: A24056

What will you do?

• Architect frontend components and modules in a modular and reusable manner, following best practices and design patterns such as component-based architecture and state management.
• Design, develop, and maintain dynamic and interactive dashboard interfaces using React.js with Typescript, ensuring responsiveness and cross-browser compatibility.
• Implement data visualization components and widgets to present complex data sets in a visually appealing and understandable format.
• Collaborate with design and product teams to translate wireframes and design mockups into functional and aesthetically pleasing dashboard layouts.
• Optimize dashboard performance and rendering speed, leveraging techniques such as virtualization and lazy loading to handle large datasets efficiently.
• Write unit tests and end-to-end tests for frontend components and features using testing frameworks such as Jest, React Testing Library, or Cypress to ensure code quality and reliability.
• Utilize data visualization libraries such as D3.js, Highcharts to create custom charts, graphs, and visualizations tailored to specific use cases and requirements.
• Troubleshoot and debug issues, ensuring timely resolution and minimal impact on project timelines.

What are we looking for?

• Proven experience (5+ years) in frontend development using React.js with Typescript, with a focus on building complex web applications and dashboard interfaces.
• Expertise in data visualization libraries such as D3.js, Chart.js, Highcarts, or Victory, with a portfolio showcasing proficiency in creating interactive and visually appealing data visualizations.
• Strong proficiency in HTML, CSS, and Typescript, with experience in frontend tooling and libraries such as Webpack, Babel, and styled-components.
• Experience with frontend state management libraries and patterns.
• Familiarity with backend technologies and APIs, including RESTful APIs data retrieval and integration into frontend applications.
• Familiarity with unit testing frameworks.
• Knowledge of frontend performance optimization techniques and tools, including code splitting, lazy loading, and performance monitoring.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Senior DevOps Engineer

Internal Code: A24055

What will you do?

Cloud Infrastructure Management:

• Design, deploy, and maintain scalable, secure, and highly available infrastructure on AWS using services such as EC2, S3, RDS, VPC, ECS, Lambda, Cognito, Eventbridge and others.
• Implement infrastructure as code (IaC) using tools such as AWS CDK script to automate the provisioning and management of AWS resources.
• Monitor and optimize cloud infrastructure performance, availability, and cost, implementing best practices for resource utilization and cost optimization.

CI/CD Pipeline Development:

• Design, implement, and maintain robust CI/CD pipelines for automated build, test, and deployment of applications using tools such as GitLab CI/CD, or Azure DevOps.
• Automate code deployment, configuration management, and release processes to ensure rapid and reliable delivery of software updates to production environments.
• Integrate automated testing, static code analysis, and security scanning into CI/CD pipelines to ensure code quality, security, and compliance.

Security and Compliance:

• Implement security best practices and controls to ensure the confidentiality, integrity, and availability of data and applications hosted on AWS.
• Implement compliance frameworks and standards ensuring adherence to HIMS Cloud Security Policy

What are we looking for?

• Relevant certifications (AWS Certified DevOps Engineer, AWS Certified Solutions Architect) are a plus.
• Proven experience (5+ years) in DevOps engineering roles, with a focus on AWS cloud services, CI/CD pipelines, and infrastructure automation.

• Expertise in designing, deploying, and managing scalable and secure infrastructure on AWS, with a deep understanding of AWS services, networking, and security.
• Hands-on experience with CI/CD tools such as GitLab CI/CD, or Azure DevOps, including configuration, customization, and troubleshooting.
• Strong knowledge of infrastructure as code (IaC) concepts and tools such as AWS CDK for automating cloud resource provisioning and management.
• Experience with containerization technologies such as Docker.
• Proficiency in scripting and programming languages such as Python, Shell, or PowerShell for automation, infrastructure management, and tooling development.
• Familiarity with security best practices, compliance frameworks, and security controls for cloud environments. Knowledge of HIMS Cloud Security Policy is a plus
• Experience working with HCC (Healthcare Commercial Cloud) is a plus
• Excellent problem-solving skills, with the ability to troubleshoot complex issues, perform root cause analysis, and implement effective solutions.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities:

• Responsible for projects management, planning and the design of electrical building systems
• Meeting clients & services providers on scope of service and conduct field surveys
• Handling project evaluation, budgets, documentation, technical specification and coordination
• Conduct analysis and selection of systems, evaluate project budgets
• Complete design documents & technical specifications
• Work Coordination with other teams as well as coaching and lead junior staff
• Responsible for making e-submission to authorities for utilities services and related building regulatory submissions

Requirements:

• Degree in Electrical Engineering accredited by Professional Engineer Board, Singapore
• Minimum 5 years of experience in the industry
• Able to work independently with minimal supervision
• Singaporean only

Job Purpose:

Assist the development of the SQE department by contributing to the daily QA operation and maintaining the high level of efficiency for all new models and engineering changes. Provide strong impetus to support continuous improvement in view of meeting all relevant KPIs for the company. Provide a framework with clear structure to build on the need to standardise and implement systems for greater clarity and efficiency. Focus on ensuring that good quality is evident in all aspects of production and serving as the extra confirmation for client products.

Key accountabilities:

1. Review the daily operation activities in the control for quality aspects.
2. Focus and ensure that the in process and outgoing quality metrics are met.
3. Execute the scheduled projects within the approved time frame.
4. Prepare and execute WI for the lines and provide training for the operators.
5. Prepare the engineering evaluations for DOE for new engineering changes.
6. Perform daily, weekly and monthly reporting to the customer and management.
7. Perform QA functions and conduct quality investigations and provide CAR.
8. Conduct client's audits and provide CAR for audit findings.
9. Provide and analyse daily line quality KPI and provide improvement plans for the quality aspects on the line.
10. Provide Customer Satisfaction reports on a monthly basis and provide solutions for quality and time factors.
11. Reconfirm and serve as the final judge for all inspection guidance issues seeking customer approval if necessary.
12. Complies with all safety policies and procedures.

Knowledge, Skills & Experience:

1. Degree or Diploma in Engineering (Mechanical or Electrical).
2. Fresh-entry or 1 year experience with quality background.
3. Strong analytical, negotiation, communication and presentation skills.
4. Excellent interpersonal skills with a high level of self-confidence, drive and motivation.

1. Overall responsibility:

- Installation, repair, maintenance of medical equipment in Singapore

- Supports the Sales Team with technical information and customer calls as needed

- Provide technical information for pre-bid and tender specifications

- Completes timesheets within the allocated timeframe

- Available for travel for training overseas

2. Consults with

• Directors

• Administrator

• Product Managers/Engineers of Principals

3. Capabilities

- Communicates effectively,

- Resourceful,

- Can work independently,

- Desire to upgrade technical and interpersonal skills

- Prompt customer response

4. Qualifications

• Electric & Electronics Engineering Certification or Equivalent

• Basic knowledge of PC, Windows & Microsoft Office

• Good communication, reading, writing English

Job description

• Troubleshooting security and network problems.
• Perform vulnerability assessment using automated tools and recommend actionable follow up to remediate the vulnerabilities and/or threats uncovered.
• Provide maintenance support for security systems and tools, including firewalls and other security technologies, as per the maintenance contract requirements.
• Perform system upgrades, patches, and backups to ensure the security systems are up-to-date and running efficiently.
• Provide incident response support, troubleshoot security incidents, and work closely with end users to resolve issues in a timely resolution.
• Proactivity monitoring, support and troubleshoot network bandwidth capacity and network performance to ensure uninterrupted services.
• Manage and maintain Cisco ISE for network access control and policy enforcement.
• Coordinate and manage local and regional ISP on maintenance, changes, and implementation of WAN (SD_WAN).
• Report network operational status by gathering and prioritizing information and managing network projects.

Requirements

• Diploma or Degree in IT or Computer Science
• Min 4 years of relevant experience in IT Infrastructure and Operations Automation Experience
• Knowledge of regulatory requirements and security compliance standards relevant to network infrastructure.
• Professional Certification and at least 4 years’ hands on experience in routing & switching - good to have CCNP.
• Professional Certification and at least 4 years’ hands on experience in network security - good to have PCNSE (Palo Alto).
• Professional Certifications and at least 2 years hands on experience in Cyber security and optional CEH, SSCP, ISC2, Microsoft Security Fundamentals (good to have)
• Any relevant Microsoft cloud security certifications (AZ-500, MS-101, MS-500)
• Good Understanding of network and security fundamentals (Concepts, Protocols. Troubleshoots).
• Experience with Windows Defender Advanced Threat Protection and latest Microsoft E5 Security Product set
• Experience in testing and evaluating Security products in a Lab environment.
• Ability to manage multiple priorities and work independently.
• Positive and professional working attitude, ability to work as a team or individual under stress with minimum supervision and deliver on tight deadlines in fast-paced environment.
• Hands on experience in one or more of the following technologies as below:
• Routing/Switching – Cisco, Meraki
• Network Security – Cisco ISE
• Firewalls/Proxy – Palo Alto, Cisco, Zscaler
• WAN – VeloCloud
• Cloud - Azure