• Manage & attend to specific customers to achieve company sales budget
• Account management for assigned customers
• To support and meet the department objectives and business goals
• Attend to all customer enquiries
• Provide sales forecast to plant for raw materials and production capacity planning
• Work closely with oversea representative for new customers development activities
• Assist in implementing and execute plan in developing new customers
• Provide short- and long-term plan on market demand
• Survey and analyses market information for management

Requirements:

• Degree in any Engineering discipline with 2 years of experience in similar industry
• Outgoing personality and ability to work independently
• Good knowledge of general market information
• Good marketing strategy and analysis
• Strong negotiation, interpersonal and problem-solving skills
• No experience requires if able to meet the above requirement may apply

5 days work week

Electronics Manufacturing Co.

Loyang Area (Designated pick-up point)

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Key Responsibilities:

• Digital control system analysis and design in switching mode power supply.
• Developing high power control (DSP) firmware to drive PFC, DC-DC conversion, and various topologies.
• Experience in C and Assembly language programming.
• Good experience in embedded operating system development environments.
• ARM/ TI/ Microchip MCU architecture familiarity will be a plus.
• Communication interface skills: I2C PMBus, UART, CAN, USB, etc.
• Matlab tool usage and experience in digital control experience: Control theory, controller design, and simulation.
• Knowledge of switching power supply is a plus

Key Requirements:

• Degree/ Master/ Ph. D in Electronic & Electrical or Computer Science.
• 2 - 8 years of relevant experience in the power management industry will be advantageous.
• Experience in control topology and transformer design study will be a
  plus.
• Knowledge of digital design, electronics, and control system analysis.

Interested candidates, who wish to apply for the advertised position, please email us an updated copy of your resume.

We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

This role is 1 Year direct contract with the client located in East.

The AI Engineer will be responsible for developing, deploying, and maintaining AI models tailored to the organization’s needs. This role involves ensuring the successful implementation of AI tools, including custom GPT models, and integrating them into the organization’s workflows. The AI Engineer will work closely with data analysts, IT, and department heads to ensure that AI solutions enhance efficiency and achieve business objectives.

Key Responsibilities:

• Model Development: Design, build, and deploy custom AI models (e.g., GPT-based tools) to meet a variety of organizational needs, such as automating meeting minutes, customer support, and internal knowledge management.
• System Integration: Integrate AI tools into existing enterprise systems, communication platforms, and databases. Develop APIs or leverage third-party tools to ensure seamless incorporation of AI models into workflows.
• Data Handling: Collect and prepare training data for AI models while ensuring compliance with data privacy and organizational policies. Implement secure data retention and processing standards, particularly when handling sensitive company information.
• Model Fine-Tuning and Maintenance: Continuously refine and optimize models based on user feedback, performance analysis, and changing business requirements. Regularly update models to align with new trends, data, and organizational goals.
• Collaboration: Partner with cross-functional teams (HR, IT, Operations) to identify AI opportunities and provide scalable solutions. Work with external AI vendors when needed to implement advanced AI technologies.
• AI Training and Support: Train employees on how to use AI tools and address common issues. Develop documentation and best practices for using AI models within the organization.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Artificial Intelligence, or a related field.
• Minimum of 3 years of experience in AI development, specifically in natural language processing (NLP) and machine learning models.
• Proficiency in AI and ML libraries (e.g., TensorFlow, PyTorch), OpenAI API, and NLP tools.
• Familiarity with enterprise systems, APIs, and system integration methods.
• Strong programming skills (Python, Java) and knowledge of data handling and security best practices.
• Excellent analytical and problem-solving skills, with the ability to translate business requirements into effective AI solutions.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Marine Service Engineer

Office location : 8 Boon Lay Way, #03-03/04, Tradehub21
Working Location: On board ship

Working days: 5 days (Mon- Friday)

Working hours : 8am - 5pm

Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  
  Requirements:
• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

• Responsible for corrective and preventive maintenance of plant machinery and monitoring of critical spare parts.
• Carry out corrective maintenance on plant machines.
• Support on preventive maintenance and machine repair.
• Attend to machines installation, modification, safety items, laboratory equipment, etc.
• Identify and carry out improvement items for machines.
• Liaise with machine agents for repair or maintenance of machines.

Requirements:

• Degree in Electrical/Electronic or Mechanical Engineering
• Prefer 2-3 year(s) of experience in maintenance/repair of machine in a manufacturing environment.
• Good trouble shooting, presentation and analytical skills.
• Good knowledge of PLC programming skills.
• Self-disciplined, independent and able to work under pressure.
• Able to communicate with all levels of staff.
• Able to commit to 12 hours shift work.

Manufacturing Industry

Loyang Area

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No : 06C3745

Audris Teo/ EA Personnel No: R1102063

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for Deep Hole Drilling
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Role & Responsibility

• Prepared detailed plans for Project Execution, Testing and Commissioning.
• Execute Commissioning Procedures as per the project documentation.
• Prepare a checklist for on site inspection to track issue status.
• Provide technical troubleshooting and creative solutions for installation challenges including LED display color calibrations.
• Conduct site acceptance test with end users for Project Final Handover.
• Responsible for writing commissioning reports and contributing to writing procedures, O&M manual, handover documents etc.
• Provide field service support when necessary.
• Understand system integration diagrams including media player, video processor for content display, control system etc.
• Review and revise shop drawing and construction drawing.
• Conduct LED installations and commissioning training.
• Support the installation of products and solutions.
• Plan and manager field service activities.

Requirements

• Minimum of 5 years' experience in the LED installation, testing and commissioning and LED color calibration.
• Ability to conduct field training for LED installations and system operations.
• Proficiency using Microsoft , AutoCAD and equivalent software.
• Ability to maintain effective working relationships with supervisor and other departments.
• Strong Analytical skills

Preferred background

• installation and commissioning experience in LED display industry.
• Work experience in LED display company.
• System application designer and capable of AutoCAD drawings

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY Singapore PTE LTD)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

• 5 days, Alexandra (South-West), walking distance from MRT
• $3200 - $4800 basic, 1mth AWS,performance bonus
• Phone allowance, Career advancement
• No experience can apply

Responsibilities:

• Support the customer requirements in collecting data, perform statistical analysis and coming up with better processes or updated processes.
• Work closely with the department leads in mapping the current process and developing the 'to be' processes.
• Create SOP, work instructions and get the required approvals. Train operations team after work instructions approval.
• Handle multiple projects of small and medium sizes.
• Support current business solutions team as required.
• Train and build technical and process capabilities within department while providing technical expert support to other sites.

Requirements:

• Possess a Diploma/Degree preferably in Mechanical Engineering, IT Engineering, Process Engineering, Supply Chain or equivalent.
• 1 year of relevant experience as Process Engineer
• Candidate with no experience can apply as on-the-job training is provided
• Comprehensive understanding in Warehousing system.
• Experience with Data collection and statistical analysis.
• Knowledge in manufacturing systems e.g. CAD, SAP,ERP etc.
• Able to lead small Project teams and do SIT,UAT as per customer requirements.
• Proven project management skills.
• Good presentation skills and in MS Word, Powerpoint and Excel.
• Good to know the Industrial Engineering basics-VSM, process mapping, time studies.

Interested applicants, please send your resume to [email protected]

• New Product process design and line setup.
• Understand SAP concept and align process design
• Work closely with local and HQ (Japan) designers on product change requirements, plan with the local group of members.
• Draft the implementation schedule to meet target date, disseminate and finetune the scheduled with production PICs for the implementation to be carried out smoothly.
• Follow up with related members and enforce the usage of systems developed for operation change tracking.
• Understand key functions and product master setting rules of ERP (SAP) system, process-related inline systems, traceability requirements, to align the process design with the systems.

Requirements:

• Diploma/Degree in Engineering Electrical & Electronics.
• Prefer 2 year(s) of working experience in the related field in the PCB manufacturing environment.
• Good statistical and analytical skills.
• Good communication, planning and coordination skills.
• Entry level are welcome as training will be provided.
• Travelling to Batam Factory and staying for project (min. 2weeks to max 2 months stay per visit depending on project requirements.

Electronics Manufacturing Industry

East Area/Bedok Area

5 days work week

Interested candidates, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Purpose: Responsible for supervising staff, ensuring health and safety regulations at work are followed, making sure adequate training has been provided to the workers in the usage of equipment, and identifying deficiencies to be improved in production.

Key Area of Responsibilities:

• Supervising the man and assembly process, ensuring quality work is done safely and efficiently.
• Organize and motivate the mini-companies to perform daily production activities.
• Draw up training, and job rotation plans to develop manpower to be more flexible and competent and stimulate continuous productivity improvement.
• Liaising with other Engineers to develop plans that improve productivity, in terms of costs and manpower required.
• Support engineering/manufacturing teams, draw up safety protocols, report issues to the manager, and develop strategies to improve efficiency and profit.
• Take part in quality meetings with QA and process, conduct production CAB meetings, and ensure corrective actions are carried out.
• Conduct daily supervisor and production meetings to achieve delivery reliability.
• Record and report on the department’s activities and production results regularly in each productivity review meeting.
• Manage consumables and non-capitalized equipment spending.
• Maintain and ensure 5S housekeeping on the shop floor.

Qualification & Experiences:

• Diploma/bachelor’s in engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering).
• At least 3 years of experience as an engineer in the manufacturing assembly environment.
• Good communication skills to perform mentoring and coaching to production staff.
• Good knowledge in problem-solving methodology.
• Ensure the safety standards and process safety management is duly followed.

Responsibilities:

• To carry out installation, repair and preventive maintenance of customers Additive Manufacturing Solutions
• To provide timely and active customer service
• To record and submit all service data and reports and when required
• Problem analysis/diagnosis of users technical problems
• To record and submit all service data and reports and when required
• Problem analysis/diagnosis of users technical problems
• Able to learn 3D software
• Attend to the technical sale enquiries & quotations.
• To assist in testing out of 3D Materials and maintaince of Demo Centre 3D Printers

Job Overview:

Responsible for managing the overall direction, coordination, implementation, execution, control and completion of structured cabling projects. Additionally, ensure projects achieve time, scope, budget, quality, safety and customer satisfaction requirements. Oversee projects from start to finish.

Responsibilities:

• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving.
• Travel to various job sites required.
• Ability to work overtime and weekends when required.
• Effectively manage multiple projects.

Job Requirement:

• Understand technical and construction documents.
• Experience in the construction or technology industries is required

· Proficient with Microsoft Office (Word, Excel, Outlook), Microsoft Project and Adobe Acrobat.

• Excellent communicator verbally and in writing
• Demonstrated management and leadership experience.
• Must be able to perform multiple tasks within deadlines.
• Understanding of general contractor procedures.

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

§ Planning, co-ordination and execution of LTA and SMRT projects

§ To attend all interface and co-ordination meetings with different stakeholders and contractors

§ Installation, monitoring, supervision, testing and troubleshooting of RTU at site

§ Preparation of project documents and drawings

Requirements:

§ Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

§ Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description

The fresh or experience Project Engineer is to handle complex projects, mainly in the Air Conditioning and Mechanical Ventilation (ACMV), in accordance with company procedures, including the continuous improvement of productivity, customer satisfaction, schedule, delivery and safety performance.

Job Responsibilities

• Assist the Senior Project Engineer and Project Manager in execution of Project Management, Project Schedule, and Coordination with sub-contractors
• Engaging in project engineering of ACMV Systems
• Managing project timelines and budgets, coordinating with contractors and subcontractors, and overseeing the installation and commissioning of HVAC systems
• Conducting site visits and inspections to ensure that work is being completed according to specifications and quality standards
• Providing technical support and troubleshooting assistance to clients and project teams, and resolve any issues that arise during the project lifecycle
• Maintaining accurate project documentation including drawings, specifications, and project reports
• Ensure project delivery according to dateline given, ensure cost control and profitability of project
• Assist in site administration
• Preliminary design and budgeting for Design and Build tenders

Job Requirements

• Min. 2 years of related working experience in ACMV works
• Diploma in Mechanical Engineering or equivalent
• Strong technical knowledge of HVAC systems, including equipment selection, load calculations, and ductwork design
• Familiarity with local building codes and regulations related to HVAC systems
• Good project management skills, including the ability to manage timelines, budgets, and resources effectively
• Strong communication and interpersonal skills, with the ability to work collaboratively with clients, contractors and project teams
• Proficiency in AutoCAD and other design software
• Strong analytical and troubleshooting skills

PC Deployment and Configuration

• Install, configure, and deploy personal computers and related peripherals, including desktops, laptops, monitors, and printers.
• Ensure that all PCs are set up according to company standards, including operating systems, software applications, and security protocols.
• Perform hardware and software upgrades as needed.

Troubleshooting and Technical Support:

• Provide technical support to end-users for PC-related issues, including hardware and software problems.
• Escalate complex problems to the appropriate IT teams when necessary.

Maintenance and Upkeep:

• Conduct routine maintenance on PCs to ensure optimal performance and security.
• Perform system updates, patches, and antivirus scans.
• Manage inventory of PC hardware and software licenses.

Documentation:

• Maintain accurate records of PC configurations, repairs, and maintenance activities.
• Updates of support tickets and resolutions details on job completion.

Job Requirements:

• Diploma / Nitec in IT, Computer Engineering, Electrical, Electronic or relevant
• Welcome entry level (Training provided)
• 5 days work (Monday to Friday)
• Islandwide work locations (Mostly in the East / Central areas)
• Salary $2300 - $2800

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team:

The TikTok Fundamental team will focus on frontend development. We will also focus on understanding our users, identifying opportunity areas, prioritizing the problems we must solve, and rapidly creating innovative user experience solutions. We are looking for experienced frontend engineers to develop web/hybrid applications.

- To develop user-interfaces for TikTok Live on PC/ Mobile Devices, including Middle platform, Operating platform, Products for users, Events with Multi-scales and etc.

- To develop infrastructures such as engineering solutions that will be supporting TikTok Live's business and productivity tools and platforms.

- Create the ultimate user experience and support the growth and development of the TikTok Live Ecosystem with high-quality design and coding.

- Explore and implement efficient collaboration methods to enhance the efficiency of remote and cross-regional communication and support the iteration of our business.

Qualifications

Minimum Qualifications

- Solid front-end programming skills with experience in solving browser compatibility issues and optimizing front-end performance.

- Understand front-end engineering and component development, having a certain design skill set and familiar with at least one MV* framework.

Preferred Qualification

- Minimum 1 year relevant work experience from a large-scale internet business

- Having excellent service awareness, learning ability, communication and collaboration ability and english language skill to use in communication and collaboration.

- Good to have experience in multi-end (Native/PC/Server) development.

- Good to have experience in participating or leading large-scale projects and open source projects.

- Good to have experience in writing tech articles or tech blogs.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Key Responsibilities:

1. Research and Development:Conduct in-depth research on emerging IoT protocols, connectivity solutions, and network infrastructure technologies.
   Design, prototype, and test new networking solutions to optimize IoT device connectivity, reliability, and energy efficiency.
   
2. Network Design and Prototyping:Develop, simulate, and test scalable network architecture for IoT environments, including wireless sensor networks
   Work on integrating IoT-specific protocols and standards within network infrastructure to ensure interoperability and security.
   
3. Testing and Validation:Implement rigorous testing and validation processes for IoT network systems, assessing performance, security, latency, and energy consumption.
   Use simulation tools to evaluate network performance and analyze results to improve network efficiency and reliability.
   
4. Collaboration and Integration:Partner with cross-functional teams, including Product Development, Data Analytics, and Security, to ensure network solutions meet product and market requirements.
   Collaborate with external vendors, industry partners, and standards organizations to remain at the forefront of IoT network innovations.
   
5. Documentation and Technical Reporting:Document R&D findings, technical specifications, and project outcomes.
   Present updates to stakeholders, highlighting advancements and technical insights to support product development.
   
6. Problem Solving and Innovation:Diagnose and troubleshoot network issues in IoT devices and propose innovative solutions to enhance system performance and robustness.
   Continuously assess industry trends to identify new opportunities and optimize network architecture for IoT scalability.
   

Qualifications:

• Education: Bachelor’s or Master’s degree in Electrical Engineering, Telecommunications, Computer Science, or a related field.
• Experience: 3+ years of experience in network infrastructure, IoT, or relevant R&D roles.
• Technical Skills: Strong foundation in network protocols
  Experience with IoT connectivity standards
  Hands-on experience with IoT devices, wireless networks, and edge computing.
  Familiarity with cloud IoT platforms and network simulation tools.
• Analytical Skills: Strong problem-solving skills for optimizing IoT network performance and security.
• Soft Skills: Excellent communication and team collaboration abilities; able to explain complex technical concepts to diverse audiences.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to **[email protected]** or please click on “Apply” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason for leaving

We regret only shortlisted candidates will be notified.

Important Note: Creation Consulting HR Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.creationrecruit.com

Creation Consulting HR Pte Ltd

EA License No: 24S2187

Job description:

• Provide 1st and 2nd level support to troubleshoot IT issues.
• Be the point of contact for service desk.
• Provide assistance & support to IT Projects.
• Assist in the daily running of data center and server management.
• Assist in procurement, document control, asset tracking & administration.

Requirements:

• 2 - 5 years of IT Technical, end-user support working experience.
• Experience in creating user’s account and mailboxes on AD and Exchange.
• Good knowledge on antivirus management e.g. Windows Defender, Symantec, McAfee.
• Good knowledge on repair PCs and notebooks such as O/S and Office Application troubleshooting.
• Good knowledge in diagnostic of hardware issues on PCs and notebooks.
• Knowledge in vendor management such like negotiation of pricing, vendor quotation, etc.
• Able to work independently as well as in a group.
• Good organization, communication and interpersonal skills.

Location: Henderson Road

Working Hour: 5 Days work Week 9AM – 6PM

Salary: $4,500 - $5,000

Job Scope

• Be the primary technical contact for customers and in house repair jobs
• Assist customers in the repair and maintenance activities, but also with Providing spare parts and associate services
• Identify and translate customers’ requests ;
• Handle technical incidents and establish reports (troubleshooting, expertise, gathering useful information for analysis
• Guarantee, when necessary, the proper processing of offers : spare parts, onsite interventions and repairs.
• Coordinate onsite interventions actions and ensure an ongoing communication to the customer.
• Provide technical assistance to the Repairs Department and Field Service Technicians + Business Centers ;
• Occasionally promote to customers, technical training sessions and sales of spare parts and repairs ;
• Initiate, together with the appropriate stakeholders, the implementation of corrective actions that arose from customer complaints/claims.
• Be the technical interface within the departments, such as Engineering, Purchasing, Sales, Production, Global Service and customers
• Identify potential sales opportunities and forward the information to the sales teams.
• Identify the spare parts needed for Sales team to quote to customer
• Recommend spare parts needed for regular maintenance/during troubleshooting
• Acts as last form of technical checks to make sure the spares quoted is according to customer’s requirement
• curb warranty costs.
• Be responsible for the collection of outstanding payments for the Customer Service department
• Maintain proper records of interaction with customers within the CRM tool
• Control offers and order confirmation as per applicable procedures

Requirements

• Have 3 to 5 years of experience in Mechanical Engineering. Marine engineering with mechanical knowledge will also be considered.
• Degree in Mechanical Engineering
• With hands on experience on compressors, turbines and pumps mechanically
• Be willing to travel if needed.

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

Job Description:

• Involvement in the entire software development life cycle including application development, implementation, testing, maintenance, and documentation.
• Responsible for the development, installation, configuration, and customization of Enterprise products and/or software services and cloud platforms.
• Designing and implementing scalable web services, applications, and APIs.
• Perform troubleshooting & debugging software defects.
• Writing, testing clean and secure code to ensure responsiveness and efficiency.
• Staying abreast of latest technologies and work with R&D team on conceptualized design of prototype and Proof-Of-Concept (POC) into eventual solution for end user’s business cases.

Requirements:

• Proficient in one or more back-end programming languages/frameworks such as C++, C#, .NET/.NET Core, Java Spring Boot, or Python.
• Proficient in JavaScript and one or more front-end frameworks such as React or Angular.
• Proficient in Git.
• Knowledge and experience in Relational Databases (e.g., MS SQL, Oracle, PostgreSQL).
• Good understanding of Agile/Waterfall software delivery methodology.
• Able to work independently and as a team.
• Fresh graduates are welcome to apply

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Key Responsibilities

• Assist with the installation and support of data center physical infrastructure.
• Install, replace, and troubleshoot cables and hardware components.
• Handle data-bearing devices, including hard drives and SSDs.
• Operate within a ticket-based environment for task management.
• Use pallet jacks or other lifting tools to move equipment safely.
• Support the Data Center Inventory and Asset Management Team in managing inventory and shipping tasks during peak times.
• Flexibility to work during weekends or holidays when required.

Qualifications and Skills

• Diploma or Degree in IT, Computer Engineering, or a related field.
• At least one year of experience in IT Support or Monitoring (fresh graduates with a proactive mindset are encouraged to apply).
• Six months or more in handling technical equipment or machinery.
• Familiarity with computer hardware and components.
• Preferred certifications include CompTIA (A+, Server+, Network+) and Basic Structure Cabling (BSC).
• Physically capable of standing, walking, and lifting frequently, with or without equipment assistance.
• Strong communication skills in English, both written and spoken.
• Enthusiasm for learning and expanding technical skills.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Job Responsibilities of E&I Engineer:

• Review project specs to ensure equipment design meets contract requirements.
• Prepare, review, and approve instrumentation and electrical deliverables (e.g., lists, data sheets, diagrams, schedules).
• Create material requisitions and perform technical bid evaluations for electrical and instrumentation equipment (e.g., transformers, MCCs, flowmeters, control valves).
• Develop engineering standards and procedures for design and production.
• Monitor project costs, timelines, and compliance with technical specifications.
• Attend technical and HAZOP review meetings to address client feedback.
• Support plant start-up, commissioning, troubleshooting, and manual preparation.
• Provide technical support to sales, engineers, and project managers.
• Self-manage daily engineering tasks while adhering to health and safety protocols.

Requirements

• Bachelor’s degree in engineering discipline
• 3 - 5 years’ E&I experience in water treatment/ Oil & Gas and Marine Offshore industry is needed

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

PC Deployment and Configuration

• Install, configure, and deploy personal computers and related peripherals, including desktops, laptops, monitors, and printers.
• Ensure that all PCs are set up according to company standards, including operating systems, software applications, and security protocols.
• Perform hardware and software upgrades as needed.

Troubleshooting and Technical Support:

• Provide technical support to end-users for PC-related issues, including hardware and software problems.
• Escalate complex problems to the appropriate IT teams when necessary.

Maintenance and Upkeep:

• Conduct routine maintenance on PCs to ensure optimal performance and security.
• Perform system updates, patches, and antivirus scans.
• Manage inventory of PC hardware and software licenses.

Documentation:

• Maintain accurate records of PC configurations, repairs, and maintenance activities.
• Updates of support tickets and resolutions details on job completion.

Job Requirements:

• Diploma / Nitec in IT, Computer Engineering, Electrical, Electronic or relevant
• Welcome entry level (Training provided)
• 5 days work (Monday to Friday)
• Islandwide work locations (Mostly in the East areas)
• Salary $2300 - $3000

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.