Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Key Responsibilities:

• Conduct comprehensive assessments of current production methodologies to identify opportunities for technological advancements that improve efficiency, safety, and product quality.
• Identify, evaluate, and integrate cutting-edge technologies to enhance operational efficiency, reduce waste, and ensure product quality. Present updates and results to stakeholders to showcase innovation progress.
• Plan, execute, and oversee engineering projects focused on innovating production processes through advanced technologies, ensuring timely and budget-conscious implementation.
• Implement rigorous testing protocols and quality control measures that leverage technology to uphold product safety and compliance with industry standards.
• Analyze existing processes to uncover inefficiencies, recommending innovative, cost-effective solutions that maintain quality and safety. Prepare and track budget estimates for technology upgrades and process improvements.
• Maintain detailed project records that capture design specifications, testing results, and performance evaluations, facilitating knowledge transfer and transparency in innovation efforts.
• Provide regular updates to stakeholders, emphasizing technological advancements, challenges, and overall project performance with a focus on innovation outcomes.

Job Requirements:

• Degree in Chemistry, Mechanical Engineering, or equivalent
• Minimum of 2 years in the packaging industry;
• Specialization in product development and process improvement with a strong emphasis on innovative packaging solutions.
• Proficient in Microsoft Office (Excel, Word, PowerPoint).
• Strong communication, problem-solving, analytical, planning, time-management, and multitasking skills.
• Knowledge of Project Management, Solidworks, and SAP would be advantageous.
• Excel in dynamic environments, demonstrating flexibility in response to technological changes and challenges.
• Anticipate and meet the evolving expectations of internal and external customers, striving for service excellence.
• Uphold high ethical standards, maintaining professionalism and reliability
• Collaborate effectively within teams to drive innovation and achieve business objectives.
• Monitor and track progress on innovative initiatives to ensure efficient and effective completion.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide.

We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

ALATAS is an international crane & deck machinery repair specialist and offers crane and deck machinery related repair services and parts supply to the Merchant Marine- and Offshore industry.

Alatas Crane Services operates out of 14 offices worldwide. We offer field service repairs, inspections, overload load testing, dry-dock repair supervision, component repairs, spare parts supply, technical support as well as supply of new cranes and upgrades to existing ones.

Our multi-disciplined Service Engineers are professionals in their field and are available attend to and solve crane and deck machinery problems of any kind.

To support our Marine Crane & Deck Machinery Service operations in Singapore, we are employing experienced Senior Service Engineer - Ship Cranes as follows:

JOB DESCRIPTION:

• To carry out field service attendances to troubleshoot & repair Deck Cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

The successful candidate will have solid working experience with marine crane and deck machinery makers such as:

• MacGREGOR
• IHI
• MITSUBISHI
• LIEBHERR
• TTS MARINE
• TSUJI
• HATLAPA
• PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE:

• Min 5 years' experience sailing as Electrical Officer on bulkers equipped with deck cranes and has carried out troubleshooting and repairing Marine Cranes, Windlasses & other hydraulic systems on board,
• In-depth knowledge and understanding of PLC controlled electro-hydraulic cranes & hydraulic machinery.
• Able to read and comprehend electric and hydraulic diagrams.
• Able to independently troubleshoot electrical, hydraulic and mechanical problems.
• Able to supervise a team of mechanics and carry out large repair projects as Lead Engineer on board, on voyage and in Ship Yards.
• Able to write technical reports and able to communicate with owners' representatives.
• Previous employment as service engineer with one of the leading deck crane manufacturers will be an added advantage.
• Experience with variable frequency drives (VFD) will be an added advantage
• Ship Electricians are welcome to apply.

4 Months Contact

Job Description:

• Assist in developing and implementing web and mobile digitalizations
• Collaborate with team members to gather and refine requirements for new features
• Conduct basic testing and debugging to ensure application functionality
• Document code and processes to improce team efficienct and product quality
• Participate in regular team meetings, sharing progress and ideas fro improvement
• Support troubleshooting and provide general maintenance for applications

Requirements:

• Higher ntiec IT Application Development
• Basic knowledge of programming lanuages (E.g. NET, JavaScript, SQL)

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Ideally with 2 or more years of DCS/PLC/SCADA/Harmonas programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Purpose of the Job

To achieve monthly and annual rental & sales revenue by servicing new and existing customers through renting & selling of Choon Huat’s construction equipment to the construction industry.

Job Description

• Create new accounts and identify new business opportunities in the equipment rental & sales business;
• Development of new customers and new applications / solutions for existing customers;
• Resolves customer complaints by investigating problems, developing solutions and making recommendations to the management;
• To ensure that the network of current and potential customers is expanded and maintained through weekly external face to face and telephone sales calls;
• Coordinate and liaise with Operation Department pertaining to sales order and after sales supports;
• Communicate technical expectation to the customer relating to the proposed solution, Choon Huat’s fleet, installation, operation and maintenance of all services provide;
• Take on call responsibility as required, and promote all Choon Huat products and services at all times;
• Cultivate relationships with existing and potential customers; and
• Submit sales activity reports regularly.

Requirements

• No prior experience required. Bonus if the candidate has an experience in renewable energy technologies (solar, wind, energy storage, etc.).
• Excellent communication and presentation skills.
• Ability to work independently and as part of a team.
• Strong problem-solving and negotiation skills.
• Product training will be provided.
• Possess a valid Singapore driving licence.

Benefits:

• Working Schedule Monday to Friday 8am to 6pm
• Working Location – West area (Nearest MRT station – Joo Koon)
• Cell Phone
• Company Vehicle
• Attractive commission scheme, Performance bonus

We transform Industrial Waste into Metals, Minerals, Specialty Chemicals and Energy.

We are seeking spirited Individuals with high positive energy levels. Happy Individuals with a passion for the

Environment and Sustainability. Individuals that want to make a difference. You must be a resourceful problem solver, with excellent people skills. To be part of our Green engineering team to maintain our High Temperature Incinerator, and Industrial Waste Water Treatment System for Hazardous Waste, and Waste Plastic to Oil Conversion.

• Candidate must possess at least Diploma in Engineering (Industrial, Mechanical, Mechatronic/Electromechanical, Electrical) or equivalent.
• At least 3 Year(s) of working experience in active preventive maintenance.
• Familiar with pumps, motors, control panels, piping, elevtricals wiring.
• Preferably with a specialise skill such as Welding, Pneumatics, Hydraulics, Piping, Instrumentation & Controls etc.
• Certifications in Safety and/or other specialities
• Handle a team of technicians

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Assists Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements
• Understand the contract and scope of work for topsides with sub-contractor
• Prepares key project documentation as per project specification requirements
• Manages project topsides related drawings and controls technical documentation across disciplines
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget
• Assists topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assists topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Supports topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Reviews the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull
• Co-ordinates between discipline to utilize the shared license based-on work priority;
• Monitors & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer
• Records & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager
• Expedites the information required by each discipline prior to start & complete the topsides design works
• Monitor 3D model clashing issues with other discipline
• Prepares Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM
• Assists topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering
• Minimum 10 years working experience in offshore oil and gas project managing topsides design works
• Able to liaise with internal and external parties
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description: Software Engineer

As a Software Engineer at D-SIMLAB Technologies, you will gain exposure to both technical and soft skills development while working on innovative software solutions for world-leading semiconductor manufacturers. This role extends beyond software development, involving close collaboration with clients and providing professional consultation services to support their operational needs.

Key Responsibilities:

• Software Product Deployment and Delivery:
  Collaborate with a team of Software Engineers and Data Scientists to ensure smooth deployment and delivery of D-SIMLAB’s software products at semiconductor manufacturing sites. Work with global clients to address their technical needs and deliver high-quality solutions.
• Product Enhancement:
  Contribute to the continuous improvement of D-SIMLAB’s software, focusing on areas such as data visualization and algorithm optimization to improve product quality and user experience. Actively participate in product development cycles, from conceptualization to implementation.
• Key Software Component Development:
  Take ownership of the development and maintenance of critical software components, ensuring scalability, performance, and reliability in diverse manufacturing environments.
• Client Consultation:
  Provide technical expertise and consultation to customers, helping them implement and optimize D-SIMLAB’s software solutions in their manufacturing processes.
  Assist in troubleshooting and problem-solving to enhance client satisfaction.
• Collaboration and Innovation:
  Work in a multicultural and multidisciplinary team, contributing to innovative ideas and technical solutions. Stay updated on the latest technology trends and actively seek ways to improve the efficiency and performance of the software.

Candidate Requirements:

• Education:
  Bachelor’s or Master’s degree in Computer Science, Software Engineering, Industrial Engineering, or a related field.
  Diploma holders with relevant experience are encouraged to apply.
• Technical Skills:
  Strong skills in C#, .NET, SQL.
  Familiarity with software development life cycles, agile methodologies, and version control systems.
  Experience with algorithms, data structures, and software architecture design.
  Experience with visualization frameworks and tools is an advantage.
• Soft Skills:
  Strong interpersonal and communication skills, with the ability to work effectively with clients and teams from different technical and cultural backgrounds.
• Adaptability and Willingness to Travel:
  Willingness to travel internationally and work on challenging projects at semiconductor manufacturing sites. Ability to adapt quickly to new environments and work under pressure to meet project deadlines.
• Career Growth:
  Interest in personal and professional growth by enhancing both technical and soft skills.Fresh graduates are welcome to apply.

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests
  

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
  Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision
  

Installation, commissioning and modification of marine switch boards and systems

Breaker calibration and testing.

Handling projects as requested by ship yard.

Testing and servicing of devices listed below

Gauges as well as transmitters for Temperature and pressure (VDO).

Safety devices for generators such as over current protection relays, reverse power protection relays (Omron, DEIF, and Crompton).

Panels such as engine alarm panel, fire alarm panel and bilge alarm panel.

Electrical instruments such as Voltmeter, ammeter, frequency meter, power factor meter & kilo wattmeter (DEIF, & selco).

Switchgears (Mitsubishi, Terasaki, Merlin gerin, & Siemens).

Testing, trouble shooting and upgrading the following panels

Diesel and shaft Generators(Caterpillar and Cummins)

Main and emergency switch boards

Generator set control panels

Fire detection system

Tank alarm system

Cranes

Navigation lights

Motors

Starters including variable drives and soft starter.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

JOB DESCRIPTION

· Embedded system software development

· IoT related protocol and software development

· Peripheral device driver and Wi-Fi related software development

· Customer issues support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electronics or Networking engineering

· Familiar with C/C++

· Familiar with embedded system and experience in driver-related development is an advantage

· Peripheral and Wi-Fi-related experience is an advantage

· Good communication and team working skills

Project location: Bukit Merah

Job Description:

• Able to work within a team and resolve issues associate with site inspection.
• Conduct critical standing supervision.
• Attend to meetings, site audit and prepare independent site progress report.
• Coordinate and liaison with Engineers in answering contractor queries.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in February/March 2025

Requirements:

• Diploma/Degree in Mechanical or Electrical Engineering from a recognised tertiary institution.
• A registered Resident Engineer with IES / ACES is an added advantage.
• Minimum 8 years’ working experience as a Resident Engineer on local projects.
• Experience in supervision of Mechanical Services installation for local Hospital/Healthcare/Commercial Developments would be added advantage.
• Excellent Interpersonal and Communication skills.

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Description:

• Responsible for the algorithm development of an AI accounting assistant, focusing on natural language processing (NLP) and speech recognition, to ensure users can easily input entries via voice or text.
• Develop and optimize AI algorithms to improve data recognition accuracy, and handle classification and storage of accounting data.
• Collaborate with backend engineers to seamlessly integrate the AI module into the system.

Requirements:

• Bachelor's degree or higher in computer science, artificial intelligence, data science, or related fields.
• At least 2 years of experience in AI algorithm development, particularly in NLP and speech recognition.
• Proficient in Python and familiar with common machine learning frameworks (such as TensorFlow, PyTorch).
• Experience in financial data processing or accounting-related projects is preferred.
• Able to speak mandarin to communicate with chinese speaking counterparts
• Work in office (near Jurong East)