Roles & Responsibilities

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste

treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system,
• Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services,
• Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS,PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Requirements:

• Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the
• Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to
• Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

Job Description

• Design, analysis and plan for security system engineering works
• Liaise with other consultants, contractors, client & authorities from inception to completion of projects
• Responsible for timely submission of design, plans and reports
• Manage projects to meet the time, cost and quality objectives
• Prepare tender specifications and drawings for tendering of construction contracts, including evaluating of tender submissions and make appropriate recommendations to clients
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects

Requirements:

• At least a good degree in Electrical/ Mechanical Engineering or relevant engineering recognized by the Professional Engineers Board
• Proficiency in Engineering software such as AutoCad, BIM etc
• Candidates with experiences in design of integrated electronic security systems (CCTV, access control system, intrusion detection system etc) or experience with a security specialist contractor / integrator would be advantageous
• Candidates with understanding of latest electronic security technologies would be advantageous
• Candidates with experiences in crash protection measures would be advantageous
• Critical thinking skill, good communication skills and the ability to work in a team
• Self-motivated, innovative thinker and willing to take on new challenges
• Candidates with more than 4 years of relevant experience would be considered for Senior Engineer position

Job Description

You will be part of the mechanical team in Engineering, reporting to Mechanical Engineering Manager. You will use 3D CAD tool to design plastic and metal parts for electronic boxes. You will work on conduct rapid prototyping and rapid testing to validate design requirements You will perform design trouble shootings and design solution implementations.

You will support parts fabrication, product assembly and production processes. We would have you work on technical drawings, design reports, test plans and technical documentations. We would work with Quality team to ensure product quality and reliability

Your Responsibilities:

• ability to evaluate stress and strain for plastic and metal designs
• experience in and understanding of various 3D printing technologies and other rapid prototyping techniques
• ability to design mechanical tests for design verifications
• understanding of plastic molding and metal fabrication processes
• ability to design parts that facilitate product assembly and production processes
• Understand the design of electromechanical connectors
• Experience providing design solutioning to prevent product being damaged by thermal and mechanical shock and vibration

The Essentials - You Will Have:

• Degree/Master in Mechanical or Mechatronic Engineering
• You have min 3 or more years of experience in mechanical design of plastic and metal parts, for electronic boxes, in electronic product industry

The Preferred - You Might Also Have:

• Candidate with the following skills will be preferred:ability to conduct computer modeling and simulation, using Ansys, during product design
  ability to instrument product and conduct shock and vibration tests on a shaker table
  You have skills to perform troubleshooting and solutioning.
  

What We Offer:

• Health Insurance including comprehensive In-patient coverage along with Top-up plans for voluntary coverage upgrade.
• Out-Patient benefits including clinical consultation, prescribed medication, telemedicine, health screening, dental & vision.
• Life and Accident Protection – covering death and disability due to natural cause, illness, and accident.
• Hybrid & Remote flexible work options.

At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just you or other roles.

#LI-Hybrid

Responsibilities

• Hardware Design, document and develop optimized hardware (PCB Layout and Schematic Capture)
• Testing, bug fixing, improving hardware performance
• Create schematic and PCB Library and Bill of Materials
• Preparing plans and documentation to support product through certification/approval
• Assisting on product issues both during production and in-service

Requirements

• Bachelor's Degree in Electrical or Electronics Engineering preferred
• Minimum 5 years of experience in Hardware Design, Validation, & Optimization
• Proven Experience in High Speed Digital board design with experience in interfacing bus standards like DDR3/4/ LVDS/MIPI/PCIe etc.
• Analog Circuit Design & Simulation
• Experience in developing complex CPU and microcontroller-based systems
• Experience in dealing with regulatory requirements such as FCC/CE
• Experience in Design Tools (Altium Designer, Pads logic and layout, Allegro or OrCAD, Microsoft Office package, JIRA, VHDL, Linux)
• Ability to work in a dynamic environment with good communication and interpersonal skills

Apply now and be a part of a team where your skills, ideas, and expertise truly make a difference! Send your CV to [email protected] for a confidential chat.

PS: However, only shortlisted candidates will be notified.

EnviroDynamics Solutions Pte Ltd | EA License No.: 12C6285

Xie Jiani | EA Personnel Reg No.: R1548854

· Technically sound and consistently designed and delivered to client’s project requirements

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned.

· Assist Professional Engineer in management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Diploma in Mechanical Engineering from a recognized Polytechnic with more than 5 years of working experience in engineering design consulting practice on Building Services projects

· Degree in Mechanical Engineering from a recognized University and eligible for registration with the Professional Engineers Board with more than 3 years of working experience in engineering design consulting practice on Building Services projects.

· Being a Professional Engineer is an advantage.

· Strong project technical knowledge and design softwares

· Good supervision and project management skills

· Excellent with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Lead team of staff for successful delivery of projects

· Strong analytical skills would be preferred

· Excellent interpersonal, good written and verbal communication skills

· Strong time management and resources management skill

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Key Roles and Responsibilities

• Be the owner of Product Quality and work closely with Materials Engineers, Customer Quality Engineers, and Quality Systems Engineers to enable CMC Materials to supply Worry-Free products to our customers.
• Lead the team to update and maintain manufacturing documentation (SOP, work instruction, batch card, FMEA, Control Plan, RFC, P&ID) to ensure their accuracy and efficiency. Review documents regularly to ensure their compliance with Safety, Quality and other regulatory requirements.
• Own the Management of Change process for any manufacturing process and equipment changes in the plant.
• Own the root cause investigation for any production, quality and customer issues related to the manufacturing process or equipment. Support Materials Engineering team in root cause finding for issues related to raw materials.
• Develop Preventative Maintenance schedule for all existing process equipment and support Maintenance Team to timely execute the PM program.
• Identify and lead continuous improvement opportunities with a data-based approach, balancing the needs of safety, quality, cost, reliability, and capacity.
• Develop a robust SQC/SPC program balancing process capability and customer requirements. Update process parameter control limits at defined intervals and own the trend reviews to ensure all processes are in control.
• Work with Control System Engineers, lab, and Materials Engineers to ensure data accuracy and availability. Drive a culture of data-based decision making.
• Develop transfer functions between customer performance requirements and internal manufacturing key characteristics. Develop/implement control strategies to ensure consistent performance at customers’ locations.
• Work closely with operation associates, shift supervisors, and operation managers to train and encourage production staff to follow procedures and understand the impact of their actions.
• Optimize production process in terms of defining sampling points & frequency, choosing helpful in-process test protocols, and working closely with the control systems team to define all control schemes.
• Drive Best-Practice sharing/transfer among global manufacturing sites.
• Support all corporate EH&S and Quality initiatives.
• Support capital projects where vital to implement new products or processes

Performs other duties as assigned.

Qualifications and Experience

• B.S. in Chemical Engineering is required. MS or higher in Chemical Engineering is a plus
• 2+ years of experience in a chemical processing environment is required. In-depth knowledge with chemical engineering unit operations: mixing, sophisticated filtration, material handling and distillation is helpful.
• Experience with PSM is a plus.
• Experience with AutoCAD or SAP is a plus.

Skills and Abilities / Core Competencies

• Strong problem-solving and statistical data analysis skills are required.
• Ability to multi-task and attention to detail are must-haves.
• Strong verbal and written communication skills within the company and to customers are required.
• Computer Skills – Proficient with Microsoft applications and statistical software such as JMP, Minitab or SAS.

Candidates with more than 2+ years of experience may be considered for Production Engineer Position.

Who we are

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

About Beca

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.

We are a growing engineering consulting company based in Singapore, seeking for a high performing professional to join us as an Executive Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Under the supervision of Senior Engineers, to perform initial engineering task on the mechanical services detailed design for building projects
• To prepare submission to authorities for approval of design
• To attend to project meeting with Client, PM and Consultants from other disciplines
• To attend site project meeting and site inspection and respond to technical queries
• Assist in coordination of quality assurance and commissioning of designs with other disciplines and other design consultants
• Handle client liaison and reporting
• Liaise with authorities on plans submission and compliance

Key Requirements

• Degree in a Mechanical Engineering recognised by Professional Engineers Board, Singapore will be an advantage
• Minimum 3 years’ experience in the design & supervision of building service projects (Those with 5 years’ experience and/or Certified Professional Engineers will be considered for a senior position).
• Experience in leading roles for design & design management of residential, commercial, institutional or hotel projects will be an advantage
• Familiarity with codes of practice, relevant regulations and a working knowledge of authority submission and approval procedures
• Competent user of relevant engineering software, Building Information Modelling and Navisworks
• Excellent written & spoken communication skills in English
• Able to work independently & exercise initiative
• Excellent delegation and communication skills, which see you enlist the help of others to meet objectives
• A team, client and delivery focused working style
• Experience in a consulting environment

Job Highlights

• Career Advancement
• Medical Allowance
• AWS & Variable Bonus

Ready to make a move?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

JOB SUMMARY

Duties include generating PCR and engineering drawing and exploring alternate solution to solve resource or production constrain. He is also responsible to plan, organize and manage assigned project activities. This requires direct interaction with customer, vendors and functional departments to monitor and ascertaining all jobs are progressing within schedule and meeting deadline.

RESPONSIBILITIES & DUTIES

• Understand the full requirements of all manufacturing and improvement project. Follow up on the kick start, execution, monitoring and work closely with related personnel to resolve issues until the completion of the project.
• Perform technical review on sales order and work closely with the sales department or customer to clarify all technical specifications and job requirements on the sales order.
• Generate PCR and manufacturing process plan.
• Generate engineering drawings and perform drafting.
• Support Asst. Engineering Manager on the job costing.
• Continuously explore for new manufacturing method or new external providers to support the production.
• Work closely with the Production Supervisor to resolve any production issue.
• Support the procurement department to deal with external providers on all technical issues.
• Understand and be aware of the impact of each activity to the company, its environment and minimize any detrimental results.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Participate/ attend all functions, activities and meeting organized by the company.
• Familiar with various laser systems as well as advance welding/cladding technique.
• Experience in robot programming for welding/laser cladding.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure on time issuance of PCR and drawings and correctness.
• Ensure all projects are on schedule and completed on time.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• Degree preferably in Manufacturing/ Mechanical Engineering discipline or equivalent.
• Preferably 2 years of relevant experience in the metal machining or oil and gas industries.

Job Description

· Monitor the machines and company equipments operational performance and condition

· Conduct preventive maintenance to machine and company equipments as per schedule

· Review and update all existing machine maintenance documents

· Prepare and design the spare parts for machines and company equipments

· Report any unsafe conditions and practices to Production Manager

· Assist of production and purchasing department of manufacturing / purchasing spare parts

· Monitor spare parts stock level and raising purchase order

· Involve in the implementation and continuous maintenance of HSE Management System

· Perform any other duties assigned by the Production Manager

Job Requirements

Knowledge of precision machining machineries, equipment and facilities

Knowledge of repair and maintenance on machineries and equipment

Knowledge of Environment, Health & Safety

Diploma in Mechanical, Electrical or Mechatronic Engineering

5 years experience in machine repair and maintenance

Job Descriptions:

* Site coordination, Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Involve in Project planning, electrical & control, instrumentation / sensor, programming, Testing and Commissioning, Service and Maintennace, Documentation and Training

* Experience in AutoCAD drawing or equivalent will be added advantages

* Ad-hoc engineering support when required.

* Willing to work on fast pace environment.

* Willingness for standby duties or work after office hour or during weekend / Public Holiday

Job Requirements:

* Relevant graduate diploma for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance.

* Fresh graduates are welcome.

* Hands on experience in automation system implementation and support.

* Experience in programming, site coordination and support

* Electrical, instrumentations and control knowledge

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Mechanical Engineering or equivalent
• Familiar with 3 or 5 axis CAM Programming and Process Development
• High level of interpersonal skills and integrity
• Solid team player
• Good communication skill
• Willing to travel overseas for long term

Job Summary:

The Mechanical Engineer is responsible for assisting in providing innovative and cost-effective solutions requiring the development or sustaining of new or improved techniques, procedures or products. The Mechanical Engineer also assist in planning, conducting and evaluating approaches to meeting the project objectives in a timely fashion.

Relationships:

Direct Supervisor: Project Team Lead or Supervised by Senior Engineer.

Essential Responsibilities and Duties:

• Design component and assembly with CAD software. Prepare engineering drawings and engineering bill of material.
• Assist in identifying and organizing requirements. Apply relevant usability procedures and principles.
• Analyse, design, develop, maintain products and assist in their commercialization.
• Build prototypes, products and systems suitable for testing. Set up and run lab simulations. Design and implement tests, document results and develop customer presentations. Provide timely corrective actions on defects.
• Produce analyses and mathematical models and draw design conclusions based on those.
• Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts. Contribute to design standards and support design re-use.
• Create and maintain product documentation. Provide support to field and customers through InTouch. Provide user training as required.
• Assign, direct and review work of technicians and provide guidance to engineers. With seniority, mentor junior engineers.
• Continually evaluate engineering approaches and risks.
• Author technical reports, papers, articles, patents and presentations. Share expertise via Eureka and special interest groups. Expand informal network throughout the organization.
• Keep abreast of novel technical concepts and markets. Adopt new practices readily to develop innovative and low-cost products.
• Maintain familiarity with company technology, organization and business.

Key Competencies:

• Electromechanical Design
• Mechanical System Design
• Hydraulics system design
• Manufacturing Technology
• Material Selection
• Product Maintainability
• Product Reliability
• Simulation and Modelling
• Stress and Strain analysis and analytical calculations
• Testing
• AutoCAD and 3D design are the basic knowledge. Most preferably already familiar with ProE/Creo, Solidworks, CATIA, NX or similar CAD.
• Able to perform FEA simulation
• Able to visualize and realize a design from conceptual descriptions
• Understanding of Windchill and CFD is an advantage
• Turbines and pumps design knowledge is an advantage

Behavior:

• Good communication skills (written and oral)
• Ability to contribute independently
• Quality and detail oriented
• Ability to work in a fast paced environment

Experiences and Competencies:

• Bachelor, MS or Ph.D degree. in Mechanical Engineering or in related field.
• 2-3 years of experience working in engineering is preferred, fresh graduate will be considered.
• Knowledge in fluid dynamics, centrifugal pump, experience in product design and development is preferred.
• Exceptional technical and problem-solving skills. Hands-on is required.

Build a career with confidence

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

Role Responsibilities

• Assist in technical proposal, understand of requirements, perform selection or co-ordinate with factory for technical solution.
• Keep Up-to-Date project status, such as drawing submission, delivery schedule, payment etc.
• Identify and mitigate project risks and liabilities.
• Organize meeting with project stakeholders.
• Actively follow up / liaise with vendors/customer to resolve issue.
• Co-ordinate & follow up with factory for equipment delivery.
• Perform shipment inspection/check, identify any punch if any.
• Attend factory test (local & overseas).
• Participate trade show, exhibition for networking and building customer relationship.

Minimum Requirements

• Min Diploma in Mechanical, or Electrical, Mechatronic, Marine engineering.
• Knowledge in Marine HVAC.
• Familiar with AutoCAD.
• Customer Management & Problem-Solving Skills.
• MS office experience.

Benefits

We are committed to offering competitive benefits programs for all of our employees and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Key Responsibilities:

• Provide sustaining Engineering support to CNC machinery assembly process
• Support manufacturing/assembly process improvement
• Support failure analysis and cost reduction through value engineering activities
• Support all process validation activities
• Design and prepare the necessary fixture/toolings for production usage purpose
• Setup and maintain Bill of Material (BOM) and process routing in SAP
• Prepare process manual and check sheet for production usage
• Support engineering activities to improve manufacturing operation key performance indicators such as quality, waste, efficiency
• Maintain and ensure systems and procedures are in compliance with ISO, Regulatory and housekeeping requirements
• Plan and execute activities with other department to ensure common goals are met
• Performs design and development engineering assignments related to activities for equipment and systems layouts in plant and production facilities.
• Support new product introduction (NPI) and product transfer to China/India
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or related discipline
• Proficiency in Microsoft Word, Excel, PowerPoint
• Proficiency in Solidworks, SAP, SQL, Share Points, DWG Editor is a plus.
• Able to lead, motivated, driven and good communication skills
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills.
• Experience in CNC Machinery assembly process and automation will be advantageous
• Experience in fixture/jig design, hands on and new technology introduction will be advantageous

Who You Are

You are a self-motivated team player with the ability to easily network in an international and cross-cultural environment, working in line with Alfa Laval drivers; Action, Interaction, and Satisfaction. You are driven and see solutions rather than problems, effectively prioritizing and executing tasks. A focus on continuous improvement is in your DNA. You build trust, by clear communication with no prestige.

If the above sounds like you, this position might be just what you’re looking for!

About The Job

Help customers with technical operating issues by carrying out troubleshooting and field service requests submitted through the International Marine Service Desk. The International Service Engineers for Water, Wind & Fuel Systems will provide technical support for the Alfa Laval Boiler System.

Job Description

Follow to all safety procedures and promptly report any unsafe practices or incidents.

• Perform planned service, commissioning, and troubleshooting for Alfa Laval systems on board vessels, including Ballast Water Treatment (PureBallast), High-Speed Separators (HSS), Fuel Conditioning Modules (FCM), Freshwater Generators (FWG), and other equipment.
• Prepare for service jobs by following the Standard Operating Procedures (SOP) to ensure efficient execution.
• Travel domestically and internationally to service jobs on board vessels, with the potential to sail with the vessel if required.
• Execute maintenance, repair, advanced troubleshooting, commissioning or other related services onboard.
• Communicate effectively with customers in English to ensure clear understanding and satisfaction.
• Document all work performed, and conclusions drawn while on board, and ensure that service reports are signed by the customer.
• Identify potential improvements, including sales leads, and provide advice to customers, passing relevant information to the organization.
• Contribute to the development and improvement of Standard Operating Procedures (SOPs).
• Provide formal training to peers and customers, assist in developing of training material and content.
• Proactively seek central support through ServiceNow or direct networking contacts and share findings with the team to keep colleagues informed.
• Be available to respond to emergency service requests, providing timely technical support to minimize vessel downtime.

Main Competencies

Decisiveness & Execution

• Be solution driven and focus on achieving results and ensure that key objectives are met.
• Take responsibility for actions with a ‘can-do’ attitude.
• Influence events actively and make tough decisions when required.
• Identify urgent decisions and make decisions under pressure.
• Take calculated risks on the basis of adequate information and analysis.

Customer focus

• Put the customers first and be eager to please them in line with company standards.
• Go out of the way to ensure that individual customer needs are met.

What You Know

• High school diploma or higher, bachelor’s degree or similar in Marine Engineering a plus.
• 5+ years field service experience on board vessels familiarity with industry regulations and standards, as well as marine mechanical and electrical systems.
• Fluent in English, both verbal and written.
• Good cross-cultural communication skills.
• Experience from working in an international context and across borders with colleagues and customers from other cultures.
• Good reporting skills. (using MS Word and Excel)
• Experience of working in CRM systems and planning tools.
• Understanding of marine separators, ballast treatment systems with electrical, mechanical and automation knowledge.

What’s In It For You

We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval’s future success.

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Masstron Pte Ltd is a dynamic and innovative company committed to excellence in production and quality assurance. We are seeking a dedicated and detail-oriented Assistant QA/QC Engineer to join our team and contribute to our commitment to delivering top-notch products and services.

Job Description:As an Assistant QA/QC Engineer, you will play a crucial role in ensuring the quality and compliance of our products throughout the production assembly phase. You will assist the QA/QC Manager with progressive quality checks, final inspections, and work closely with our customers' quality teams for factory acceptance tests and handover processes. Your responsibilities will also include fronting customer audits and implementing robust quality management systems within the company.

Key Responsibilities:

• Assist the QA/QC Manager in conducting progressive quality checks during the production assembly phase.
• Perform final quality checks before product delivery.
• Collaborate with customer quality teams for factory acceptance tests and handover tests.
• Front customer audits and address any quality-related concerns.
• Implement and maintain quality management systems to ensure compliance with industry standards.
• Conduct root cause analysis and develop corrective actions for quality issues.
• Prepare and maintain quality documentation, reports, and records.
• Provide training and support to production staff on quality standards and best practices.
• Stay updated on industry trends and regulatory requirements to continuously improve quality processes.

Requirements:

• Diploma in Engineering, Quality Assurance, or a related field.
• Strong knowledge of quality control standards and methodologies.
• Excellent problem-solving skills and attention to detail.
• Ability to work collaboratively with cross-functional teams.
• Strong communication and interpersonal skills.
• Proficiency in using quality inspection tools and software.

What We Offer:

• Opportunities for professional development and growth.
• A supportive and collaborative work environment.
• The chance to make a significant impact on our company's success.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.

Job Description:

The Prototype Machine Project Engineer is responsible for overseeing the entire process of building new prototype machines, from initial design transfer to final production handoff. This role requires managing various aspects of the project, including material procurement, troubleshooting, and team supervision, to ensure that prototypes are met the required quality standards, completed on schedule, and transfer efficiently to production.

You will work closely with R&D, technicians, and the quality control (QC) department to ensure a smooth transition from design to prototype and ultimately to full-scale production. Additionally, the role involves monitoring material costs and ensuring effective collaboration between teams.

This position requires strong project management skills, technical expertise in prototyping and manufacturing processes, and the ability to coordinate cross-functional teams to achieve project goals.

Responsibilities:

• Manage material delivery before prototype
• Diagnose and troubleshoot prototype machine
• Manage material cost for prototype and production
• Transfer R&D design to prototype
• Supervise Technicians during Assembly
• Transfer Completed Prototypes to Production

Requirements:

• Diploma / Degree in Mechanical / Manufacturing Engineering or Equivalent
• At least 2 years of experience in project management, preferably in a machine tool company or engineering environment.
• Proficient in Microsoft Word, Excel and PowerPoint
• Work Independently and ability to diagnose and resolve problems.
• Hands-on experience with machine.
• Good time management, pro-active, self-motivated and high sense of responsibility.

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.