RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Singapore Based (Woodlands Industrial Park / Site Office)

5.5 Days work per week (Mon to Fri 8:30am to 5:30pm & Sat 8:30sm to 12:30pm)

Salary: $3,000 to $6,000 depending on experience

Candidate must possess at least a Diploma, Advanced/ Higher/ Graduate Diploma or Degree in Mechanical, Electrical Engineering + Experience in chiller system

Career Progression Opportunities

Responsibilities & Duties

Knowledge of M&E project requirements and contract requirements

Able to manage projects/ claims/ sub-contracts

To able to work odd hours (if necessary)

Whatsapp: +65 80135651(Alvin)

Alvin Chua Ming Jing:R23116192

The Supreme HR Advisory Pte Ltd: 14C7279

• Central-North location
• 5 days work week
• $7,500 - $13,000 + Variable bonus
• Excellent career progression
• Attractive employee welfare benefit
• Regional projects spanning from Singapore to China, Bhutan, and Cambodia.

Responsibilities:

Reports directly to the Managing Director. You are to serve as Qualified Person and manage a team of engineers to ensure safe Structural/ Geotechnical design and excellent delivery of service to clients.

• Serve as Qualified Person (QP) and responsible for PE endorsement for projects assigned
• Responsible for the profitability and cost efficiency of your team
• Project coordination/management
• Lead projects and attend meetings
• Supervise and inspect construction works.
• Managing and supervising technical/site staff and administrative functions of the projects.
• Provide guidance and manage engineers in the team to ensure on-time and accurate delivery of service.
• Check critical design calculations and specifications of the project prior to approving all C&S related documents and drawings produced in the projects prior to submission to regulatory authorities.
• Able to be hands-on to carry out detailed analysis and design of civil, structural, and geotechnical works
• Able to be hands-on in preparing design calculation reports and structural drawings for authorities' submissions;
• Able to coordinate with various stakeholders such as clients, consultants, and contractors for projects

Requirements:

• Degree in Civil/Structural/Geotechnical Engineering or its equivalent
• Local design experience in C&S/ Geotechnical engineering work & conversant with Singapore Building Codes and Practices
• Familiarity with engineering software (e.g. Tedds, StaadPro, Prota, Etab) and submission procedures to regulatory authorities
• Strong report writing skills to prepare and furnish reports
• Registered with Singapore PE Board as Professional Engineer
• Willing to sign as signing QP

We regret that only shortlisted candidate will be notified.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Job Summary:

We are seeking a talented IT Engineer - MES who will be responsible for the integration of Computer Integrated Manufacturing (CIM) systems and Manufacturing Execution Systems (MES) focusing on improving efficiency and productivity to enhance manufacturing processes.

Mandatory Skill-set:

• Degree in Computer Science, Computer Engineering;
• At least 2 years of experience in supporting Manufacturing Execution System (MES) applications (e.g., Siemens Opcenter, Rockwell FactoryTalk);
• Proficiency in programming languages such as SQL, Python, or C#;
• Working knowledge in Unix scripting;
• Good understanding in application server, client application and database (i.e. Oracle);
• Independent and proactive yet a strong team player;
• Excellent spoken and written communication skills.

Desired Skill-set:

• Experience in Tibco (TIB / RV) in high technology manufacturing environment.

Responsibilities:

• Provide L2 and L3 support for production systems, focusing on monitoring, maintaining, and continuously improving the Manufacturing Execution System (MES);
• Ensure the proper operation of production lines concerning products, routes, operations, equipment, recipes, and lot movements;
• Analyze user requirements to perform MES modeling and configuration for changes in material flow;
• Participate in User Acceptance Testing (UAT) and System Integration Testing (SIT) to validate system performance and functionality;
• Offer both user and system support during pre-implementation and post-implementation phases to ensure a smooth transition and operation;
• Ensure that development tasks are completed on time, adhering to corporate policies and guidelines, with proper documentation;

Test Engineer

Our reputable client is looking for a System Test Engineer (IT) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 2 years of System Test experience.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Responsibilities:

• Perform timely and accurate calibration service both in-house and on-site for Electrical Instruments.

• Generate accurate calibration records and calibration certificates in a timely manner.

• Assist in maintaining the calibration laboratory in compliance with ISO/IEC 17025 standards.

• Support the maintenance of internal traceability and instrumentation maintenance.

• Perform ad hoc jobs as assigned by the line manager.

Requirements:

• ITE or Diploma in Electrical/ Electronic Engineering or any other related field.

• Experience in Calibration and Testing of Electrical Equipment would be an advantage.

• Troubleshooting of Test Equipment is an advantage.

• Able to use Microsoft Office (Excel& Word).

• Able to work independently with minimal supervision in a fast-paced environment.

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to [email protected]

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion!

R24121196 | EA License 16C7883

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is a global leader in semiconductor inspection solutions.

• Installation and maintenance of semiconductor equipment.
• Record engineering enhancements for future documentation.
• Develop procedures for the assembly, inspection, and testing of equipment.

Requirements:

• Diploma in Mechanical/Mechatronics Engineering or equivalent.
• At least 2 years of experience in setting up automation equipment.
• Knowledge of Electro Mechatronic System
• Willing to travel internationally for field support as needed.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Working Location: Tuas (Client Site)
• Working Days : 5 Days ( Mon- Fri)
• Working Hours: 8am-5pm
• Salary Range: $2,700-$3,200

Responsibilities:

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Responsibilities:

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

In addition the Band 1 Technician will mentor and assist Band 0 technicians in their work and provide support to Band 2 Technicians in resolving tickets.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

My client, a global quantitative trading firm, is looking for an experienced Network Engineer to help with their trading infrastructure expansion plan in Singapore.

Responsibilities:

• Develop and deploy high-performance network architectures
• Implement robust security measures to safeguard data and infrastructure
• Continuous monitoring and optimization of the network performance
• Minimize downtime and ensure uninterrupted trading operation

Requirements:

• Bachelor's degree in information technology, or a related field
• Excellent communication skills in English
• Demonstrated track record as a Network Engineer in a high-frequency/low-latency trading environment
• Expertise in network protocols, topologies, architectures and devices
• Practical experience with network monitoring, analysis tools, and automation using Python (will be an advantage)
• Knowledge of market data feeds, exchange connectivity, FIX protocol, and trading platforms

With well over a decade of a solid and enviable track record behind us, headquartered in Hong Kong, Pinpoint Asia Infotech Pte Ltd (EA License: 16C8291) is the go-to IT Search Firm for several top Investment Banks and Financial Institutions.

If you are interested in the above position, please send your CV to Charlie Kim @ [email protected] (EA Registration number: Reg No: R23112483)

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate produces design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design that are cost-effective, meet the specification's requirements, and can be constructed and commissioned effectively. The term ‘cost’ embraces all costs associated with the design and its subsequent construction.
• The candidate shall provide and carry out to be cost effective the whole out turn cost of the design solution must be considered including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have extensive expertise in the technical execution of process plant systems within an intricate water industry.
• The candidate shall be proficient in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have excellent knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have excellent proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall ensure that standard practices are utilised wherever possible.
• Maintain competitiveness.
• The candidate shall provide estimates and feedback for the Proposals department as required.
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• Assist in developing procedures and processes.
• Monitor and review the procedures and processes.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• Ensure co-ordination of designs with all other disciplines internal and external to ensure that the design processes carried out on the contract are coordinated for the benefit of the contract as a whole.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff
• Assist in ensuring a safe working environment for all staff
• Reduce waste to a minimum from all departmental activities
• Ensure designs take account of environmental issues
• The candidate shall ensure that design takes full regard for all health and safety requirements.
• The candidate shall ensure that design takes full regard of all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 8 years of experience in Instrumentation, Control, & Automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet the project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 5 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Senior IT Support Executive

• Working hours: 8.30am to 6.00pm (Mon – Fri)
• Office location: Pandan Road [Company transport is provided from Clementi MRT (one way) ]
• Salary: $3500 – 4200

Responsibilities:

• Administer and configure infrastructure systems and applications (e.g. Active Directory Services, Data Centre, video conferencing, audio system, telephony, server storage, backup, etc.), network devices (Firewall, routers, VPN, internet proxy, wireless, etc.), desktop, mobile devices and other remote devices.
• Ensure systems are backed up automatically, recovery plans and disaster recovery plans and patches are carried out successfully and monitor the systems’ resources usage closely.
• Liaise with external vendors to ensure Service Level Agreements (SLA) are met.
• Draft and update technical documentation such as administration & user guides.
• Provide technical support to both Local and Overseas branches’ users over the LAN and WAN without compromising security.
• Source for products/solutions and vendors/suppliers for required projects.
• Provide L1/L2 support and participate as a team lead or member in projects.

Requirements:

• Diploma or Degree in Computer Science, Information Technology, OR/AND Certification in CCNA
• Minimum of one year of relevant experience
• Proficient in enterprise networking, including WAN, LAN, and VPN optimization implementation and support
• Skilled in administering Microsoft Server 2012 and later, Microsoft 365, and Google Suite products/services
• Familiar with internet architecture designs such as TCP/IP, DNS, DHCP, Proxy and Firewall
• Familiar with devices like Alcatel PABX, FortiGate Devices, Cisco and Unifi Wireless AP Controller
• Strong knowledge of CyberRisk and CyberSecurity; familiarity with PDPA is highly preferred
• Experience with Veeam, VMware, and UNIX/Linux is an added advantage
• Experience in API/Web Programming and Database Administration is an added advantage

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis to support our client's ongoing project.

*Duration: 1 year (renewable)

*Work Location: Tuas (company transport is provided)

*Working days: 5.5 days

About the role:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with contractors on site.
• Focus on inter-disciplinary construction management by assisting the CRE in coordinating the existing team of discipline Lead Resident Engineers, including liaising with the in-house Engineering Design Manager (EDM) on any outstanding design issues affecting immediate construction activities.
• Lead and coordinate construction work interfaces between contractors, including managing tie-ins and collaborating closely with the counterpart Interface Manager.
• Organize interface meetings between various contractors to facilitate resolution of coordination and tie-in point issues.
• Work with the BIM Manager to set up interface BIM walkthrough sessions as needed with the contractors.
• Provide project delivery planning updates on interfacing and tie-in points, specifically addressing MEICA issues given the project's current stage.
• Coordinate and expedite urgent RFA/RFI submissions regarding interfacing matters, particularly between EPC1 and EPC2.
• Attend site meetings as required by the CRE and work internally to resolve technical issues with contractors concerning interfacing matters, with a specific emphasis on MEICA issues.
• Participate in and follow up on interface and coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, and other relevant sessions, ensuring coordinated completion of the works leading into the Testing and Commissioning phase of the project.

About you:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for manual lathe machines and CNC machines
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)