Total 51 construction engineer job vacancies in Art / Design / Entertainment category in D14 Geylang, Eunos

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

(A) Essential Job Functions:

The Design Engineer (Geotechnical) is responsible, but not limited to, the following:

• Coordination of Geotechnical works for construction.
• To attend meetings with Client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Benefits:

• Central-West
• Comprehensive employee benefits
• Excellent Career Growth and Prospect
• Salary (commensurate with experience): UP to $11,000

Job Scope:

• Collaborate with the front-end design team to complete the chip floorplan, clock architecture, and power plan.
• Lead physical design tasks from the Netlist to GDSII, including Place & Route (P&R), formal verification, static timing analysis, physical verification, power analysis, and design for reliability.
• Oversee tapeout processes for the physical design.
• Research and develop physical design methodologies for advanced process nodes.
• Build and maintain an automated physical design platform.

Job Requirement:

• Bachelor's degree or higher in Electronic Engineering, Microelectronics, Computer Science, or a related field.
• Experience in digital backend design, with hands-on project involvement.

To Apply, kindly click on the "APPLY NOW" button and job details.
We regret that only shortlisted candidates will be notified.
StaffKing Pte Ltd (20C0358) | Trance Teu (R1988522)

Summary:

• Location : North
• 5 day, office hours
• MNC with good career progressions
• AWS + VB

Responsibilities:

• Support the design, development, configuration, and implementation of mechanical and electronic systems to enhance efficiency, improve yield, and strengthen EO capabilities, from concept to pilot stage.
• Recommend, procure, implement, and optimize mechanical and electronic components as needed.
• Provide timely assistance to OPs teams during process runs, transitioning from the pilot phase to production, and ensure solution documentation is created and maintained accurately.
• Involve in meetings with customers to understand their requirements for new projects.
• Research and develop innovative ideas and concepts to improve the company’s performance and competitiveness in industrial automation.
• Procure or assist in procuring necessary items to facilitate the execution of these duties.

Requirements:

• Diploma or Bachelor Degree in Mechanical Engineering
• Experience in setting up PLCs, single-board computers, or robotic/automated systems, especially in an industrial setting, is an advantage.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

(A) Essential Job Functions:

The Design Engineer (C&S) is responsible, but not limited to, the following:

• Coordination of civil/structural works for construction.
• To attend meetings with client, subcontractors and consultants, etc.
• Attend to site issues, ensuring timely response of RFI, coordinate CO substantiations, material costing and estimation.
• Liaise closely with internal and external parties as well as the authorities to resolve structural design discrepancies and construction issues.
• Coordinate with consultants an liaise with authorities for updates and submissions of project design.
• Manage and resolve production, quality, design & engineering and schedule issues.
• Liaise and coordinate with other stakeholders and consultants on the design and technical issues relating to temporary works.
• Any ad-hoc duties assigned by supervisor.

(B) Minimum Qualifications/ Job Experience:

• Minimum Degree holder in Civil/Structural Engineering or Geotechnical Engineering or its equivalent.
• At least 3 years of engineering experience in the Construction industry.

(C) Knowledge/ Skills/ Abilities:

• Working knowledge of general construction knowledge, especially in Civil Projects.
• Good verbal and written communication skills.
• Strong organizational and interpersonal skills.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/projects at one time.
• Ability to analyse and synthesize complex issues quickly.
• Able to work overtime and be on standby when required.

Responsibilities

• Preparation of tender and contract documents including BQ
• Prepare and analyze costing for tenders
• Cost planning, estimation and measurement of quantities
• Assist in preparation of budget for M&E works
• Update M&E drawing
• Design drawing, design calculation
• Sourcing for sub-contractors and suppliers and price negotiation
• Support and tender multiple M&E projects concurrently
• Lead pre-tender meetings and brief team members’ duties during estimate preparation and submission stage
• Ensure tenders are well documented in a timely manner
• Coordinate with client and internal departments
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 2 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Description

- Coordinate, Manage and supervise all M&E work; including but not limited to Planning, Scheduling, Controlling and Coordinating

- Prepare M&E drawings and CSD drawings and liaise with Consultants and Architects to issue drawing for approval.

- Ensure M&E works are performed on time, within budget and in compliance with all necessary standards, code of practice and safety regulations

- Manage M&E subcontractors and tradesman for ensuring works and materials are in accordance

- Monitor Progress, quality of workmanship and compliance of requirements

- Understand Main Contract, subcontract requirement

- Ensure all M&E submissions and applications to the relevant authorities to facilitate RI, TOP and CSC clearance, Combine all necessary documents for handover

- Attend to all M&E defects after handover

- Other ad-hoc duties as assigned

Job Requirement

- Diploma/Degree in Mechanical or Electrical Engineering or equivalent

- Min 5 years experience in M&E Coordination or relevant for landed house project

- Able to communicate and liaise with Chinese speaking associate

- Good communication skills and ability to work independently under minimal supervision, Good knowledge in local standards & requirements

- Familiar with AutoCAD & Revit

- Working hours: Monday to Saturday: 8am to 7pm at project site

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

RTL Lead Engineer

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 10-12 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, RTL Design

Responsibilities:

We are seeking a talented RTL Engineer to join our team in Singapore. As an RTL Engineer, you'll ensure the highest quality products by developing and implementing robust methodologies. Work alongside a talented team of engineers to deliver innovative solutions that meet the evolving needs of our customers.

Responsibilities

• Own and be responsible for pre-tape out quality for digital SOC modules on the MCU

• Explore architecture and develop micro-architecture.

• RTL development for IPs and SOCs using Verilog

• 3rd party IP identification, selection, and integration

• Collaboration with verification and FPGA teams in test plan development and debug

• Collaborate with the Physical Design team to close the design on timing and power targets

• Assist in silicon bring-up and validation;

• Run tool for quality checks (LINT, CDC, and RDC) and fix/waive the issues

Requirements

• Bachelor’s degree in Electronics Engineering, Electrical Engineering, Instrumentation & Control Engineering, or a related field, plus 5-8 years of experience.

• Possess deep and broad knowledge of current and emerging SOC design technologies.

• Have expert knowledge in designing, implementing, and troubleshooting IPs and SOC

• Demonstrate a deep understanding of customer needs and the competitive landscape.

• Ability to estimate the impact of and help plan and lead the implementations and have a positive impact on the entire output

• Can architect and guide programs across the full range of technical areas.

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Lead Engineer, Design Verification

(Senior Staff Engineer)

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 8-12 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Job Responsibilities:

· Design and implementation of mixed signal CMOS IP. Development cycle including circuit design, simulation, modeling, verification and bench characterization.

· Management products utilizing leading edge sub-micron CMOS technologies, e.g., 5/6nm

· Developing state of the art high speed mixed signal IP products that include op amps, comparators, bandgap, low-drop linear regulator, ADCs, DC-DC converters, and high bit-rate (Gbps) Serdes TX/RX.

Requirements:

· Bachelor or above degree in Microelectronic or Electronic and Information Engineering

· 5 years or above experience in the area of analog design

· Good knowledge in analog IC design in high speed Serdes, e.g., PLL, CDR, CTLE/DFE, TX driver etc.

• Solid understanding and experience in key analog layout considerations such as device matching, parasitic, noise coupling, floor planning, sensitive signal routing, current density and reliability considerations
• Familiar with SPICE simulation tool (e.g., Cadence spectre, Synopsys Custom Compiler, Calibre)

· Strong Communication skills, high level of independence, self-motivation and good team player

Job Description

Overall Purpose Of The Job (Brief description of the primary purpose of this position)

IT Shared Services (ITSS) provide Service Desk, Infrastructure, and Application support services to business lines globally. The Infrastructure Engineer (Systems) role will engage primarily in Level 2 Systems infrastructure support as part of a larger Design, Build and Run function in the Systems and End User Computing stack in ITSS Support focus includes timely resolution of incidents, fulfilment of requests, and execution of changes.In a non-support function, the Infrastructure engineer can be called upon to participate in IT project-related activities.

Key Responsibilities (Critical responsibilities and skills of this position, listed in order of importance)

• Windows Server Administration (Including but not limited to below)
• Microsoft Windows Operating Systems
• Microsoft Active Directory (including AD Integrated DNS, DHCP)
• Microsoft Exchange
• Microsoft File and Print Server
• Office 365 Support
• Microsoft Skype for Business
• Non-Microsoft Technologies / Cloud Services Administration (Including but not limited to below)
• Azure or AWS Public Cloud infrastructure
• External Mail Gateway Services (SaaS or Appliance based)
• External DNS Systems
• Monitoring Tool Platform
• Secure File sharing appliance
• Backup/Restore Technologies
• VDI and Application Virtualization Infrastructure
• Encryption Infrastructure
• Participate in Major Incident, Incident, Request, and Change resolution
• Participate in project-related discussions and implementations
• Participate in the post-incident review and problem management
• Participate (where applicable) in release and availability management
• Conduct Systems patching and remediation
• Research and review emerging technologies as applicable to the environment.
• Coordinate with Service Desk, L2/L3 support teams, and users around the globe for issue resolution
• Understand and apply knowledge of the environment in order to deliver solutions that meet the needs of the business.
• Work with Business Units, Application Development, and IT teams to deliver to business requirements
• Orchestrate and work with key vendors.
• Actively seek improvements to the team’s process.

Job Profile

Required Skills and Knowledge (Brief description of technical knowledge or skills needed to perform the job)

• Must have the ability to work in a fast pace environment demonstrating autonomy in conforming to strategic intent while adhering to team values at all times
• Mandatory expertise in Server Administration (Microsoft), VMWare, and Client-Server Networking (LAN/WAN, TCP/IP Stack, DNS/DHCP)
• Proven experience in Public Cloud (Azure, AWS) management, deployment, and operations.
• Excellent knowledge of server hardware (including SCSI, RAID, and I/O topology).
• Experience in Application Virtualization (XenApp), Virtual Desktop Infrastructure (Horizon or XenDesktop)
• Technical knowledge of various MS Windows operating systems and database solutions
• Experience software distribution management systems (e.g. Microsoft System Center)
• Experience in monitoring products (E.g. Microsoft SCOM, Solarwinds)
• Experience in using ITSM toolsets such as Service Now.
• Understanding of computer server architectures, including Storage Area Networking (SAN), networking topics
• Problem-solving and root cause identification skills. Strong analytic and decision-making abilities.
• Excellent knowledge of Microsoft’s Active Directory and Microsoft Exchange.
• Excellent knowledge of storage hardware (including Fiber channel, clustering, etc.)
• Experience in Backup/Restore technologies (E.g. Cloud-based, Veeam, Symantec)
• Must have an understanding and working knowledge of PC-based equipment and common PC-based applications.
• Experience producing business-relevant presentations and technical-oriented writing is mandatory.
• Excellent communications and interpersonal and presentation skills.

1. Singapore Citizens or PRs are preferred;

2. It is best to have more than 3 years of work experience in MECHANICAL ENGINEER or MECHANICAL ENGINEERING TECHNICIAN

3. The salary range is between SGD 2400-4600.

4.Work 6 days a week, overtime on Saturday and Sunday, shift work system.

Interested applicant please email your resume at [email protected] or contact us at +65 86969408.

Singjob International Pte Ltd | Rainobw Deng | R1871429 | EA License No. 18C9193

Responsibilities:

• Install, operate, maintain, and repair projection equipment for events and live productions
• Set up and operate video systems, such as video broadcast equipment and recording devices, install and configure specific systems
• Assist in permanent installation of items such as LED walls, large projectors, video feeds or computer networking systems and maintain inventory and storage of video equipment
• Organize and maintain compliance, license, and warranty information related to video equipment
• Train volunteers and end-users of the systems

Requirements:

• Formal training in live-production or video production
• At least 2 years of relevant experience
• Knowledge in audio-visual equipment, computers, presentation software, A/V equipment
• Able to work on weekday nights and weekends

Please note that only shortlisted applicants will be contacted. Thank you.

We are looking for a versatile and creative **3D Design and Digital Marketing Engineer** to join our team. The ideal candidate will be responsible for designing 3D models, managing 3D printing, handling digital content creation, and managing online marketing campaigns across platforms like Facebook and Instagram. You will also be responsible for maintaining and updating our company’s website to ensure it remains visually appealing and functional.

**Key Responsibilities:**

• Design and create 3D models using CAD or other 3D modeling software.
• Operate and manage 3D printing processes.
• Edit and enhance images for promotional materials using Photoshop.
• Develop, maintain, and update the company's website.
• Plan, create, and manage online advertising campaigns, especially on Facebook Ads and Instagram.
• Collaborate with other team members to ensure consistent branding across digital platforms.
• Analyze the performance of digital ads and optimize campaigns to increase effectiveness.

**Requirements:**

• Proficiency in 3D modeling software (e.g., AutoCAD, Blender, Fusion 360 or similar).
• Experience with 3D printing technology.
• Strong skills in Adobe Photoshop for image editing.
• Knowledge of web design principles and experience maintaining websites (WordPress or similar platforms).
• Hands-on experience with Facebook Ads Manager and Instagram Ads.
• Strong attention to detail and creativity in design.
• Ability to multitask and manage various projects simultaneously.
• Excellent communication and teamwork skills.

**Preferred Qualifications:**

• Experience with other Adobe Creative Suite tools (Illustrator, InDesign, etc.).
• Basic knowledge of HTML/CSS for website customization.
• Previous experience in both design and marketing roles.

Contact W/apps: +65 96714031 / https://wa.me/6596714031

8 Kaki Bukit Ave 4 #03-10

Premier@Kaki Bukit

Singapore 415875

Summary

✅✅Salary Up to $$7000 (depends on experience)

✅✅MNC Company

✅✅Changi project

Job Description

• Oversee and evaluate resources, and manage specialist subcontractors for viaduct construction to ensure compliance with the construction schedule, aiming to complete the project within the agreed timeframe.
• Plan and supervise the viaduct construction process, which includes the installation of precast viaduct segments using Launching Girders and Lifting Frames.
• Develop specifications for Launching Girders and Lifting Frames, and oversee their factory fabrication and on-site erection.
• Review and verify construction drawings, shop drawings, method statements, and construction sequences for all aspects of viaduct construction. This includes design, assembly, and operation of launching equipment, post-tensioning works, and any proposed modifications.

Job Requirements

• Degree in Civil or Construction Engineering
• Viaduct, flyover, and bridge construction projects
• Experience in precast viaduct segment construction using Balanced Cantilever and Span-by-span construction methods

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Khor Wan Ying (R22109948)

Join our team of Design Engineer for a rewarding career in designing our product for some of the world’s most advanced semiconductor customers. This position requires the incumbent to support all phases of design project according to the product test specifications. Working with the team, the Design Engineer will gain knowledge of the latest technology and the opportunity to work on newly developed products.

He/ She possesses mastery of design fundamentals and technical skills to execute design concepts required for EQT product. He/ She is able to work on multiple projects concurrently and deliver on expectations within tight deadlines. He/ She provides engineering support in resolving production challenges including quality, on-time delivery and technical challenges to achieve total customer satisfaction.

Responsibilities

• Perform 3D Modelling / 2D Drafting / Thermal & Flow Stimulation using computer-aided design software (Solidworks, 3D CAD tools, etc.).
• Understand the project and task scope assigned and work accordingly to complete the project within the deadline.
• Must ensure that the final designed product quality and deliverables meet the required specifications and standards.
• Monitor and achieve departmental and individual Key Performance Indicators (KPIs) targets related to project delivery, quality, and productivity.
• Collaborate with Assistant Manager/ Staff Engineer to ensure daily engineering tasks are well-controlled, monitored, and on track.

Requirements

• Studies in any Engineering Discipline (Mechanical, Mechatronic, E&E, Precision Engineering)
• Min 5 years of Product Design competence, good troubleshooting capability.
• Proficient in Solidworks, GD&T or any 3D CAD Tools. Knowledge of Flow & Thermal Simulation is an added advantage.
• Well versed in Microsoft Office. Knowledge of GSS & PDM system is advantageous.
• Possess knowledge in semiconductor testing environment.
• A positive learner, meticulous worker and a team player.

Design & Construction Operations Senior Coordinator - APAC

Role Purpose

As part of the Global Design & Construction Operations team, the Global D&C Operations Senior Coordinator will support Operations Global and Regional Initiatives and activities, including taking ownership of delivering key BAU activities, and global/regional focused initiatives (Operational Goals, Global Initiatives, tasks). Manages performance of direct reports and supports relationship with key Stakeholders.

This Global D&C Operations Senior Coordinator will focus on ensuring the integration of Global Goals and BAU Initiatives in regions. Driving digital transformation by overseeing digital initiatives, managing business intelligence (BI) processes, and coordinating data-driven decision-making processes. Supporting regional POCs on the creation of charts, reports or templates with technology tools for Process Management, Capital Controllership or Performance functions ensuring the consistency of them across functions.

D&C Operations Team Mission

Global D&C Operations shall empower and enable regional D&C delivery teams. We enhance D&C related decision making, in collaboration with business units within D&C, GREF and FinOps. We strive for global consistency, stakeholder alignment and standardization across the regional teams. We find the right balance between simplification and risk management”

What this job involves/ Responsibilities

Global D&C Operations Senior Coordinator will deploy and coordinate the following functions:

• Work closely with DART team to develop and implement digital strategies aligned with business goals and objectives. Drive analysis, definition and implementation of operational improvement processes, tools and templates for Global initiatives. Coordinate BI processes, including data collection, analysis, and reporting.
• Support Global initiatives from initiation to successful implementation, in order to improve the project delivery teams, by improving delivery times, site quality and data reliability, demonstrating Customer Obsession and Insist on the Highest Standards.
• Contribute by providing data analysis, continuous improvement recommendations, and project management support to new and existing global initiatives that drive positive change and increase efficiency in the delivery of a worldwide portfolio.
• Facilitate clear and efficient communication channels to ensure seamless information sharing and coordination among team members worldwide, ensuring the transfer of best practices, industry knowledge, and skills within the global team.
• Act as a change agent, assisting in driving adoption and acceptance of new tools, solutions, and initiatives. Communicate the benefits, provide training, address concerns, and monitor the progress of change initiatives.
• Ensure that all initiatives/activities documentation is complete and accurate according to company’s requirements and procedures (SOP´s) during the different implementation phases.
• Support on regional workshops: Ensure client. Understand in scope of services as per global contract and service delivery model. Help client understand the implementation methodology: what are we implementing, when and how (phases and deliverables).
• Coordinate with Regional Teams to implement Global tools and Solutions.
• Develop, maintain and improve reporting tools to justify status (Compliance Report) for SLAs, KPIs, Global Initiatives or other supporting Project teams in the application and compliance.
• Support on the SOPs implementation, potential changes or improvements in the application.
• Liaison with JLL’s other client account teams to gather best practice and cost benchmark data.

Global D&C Operations Senior Coordinator Technological functions:

• Core data processing & oversight– responding to requests and queries relating to new and existing data;
• Global and multi-regional data reporting and analytics; maintain / improve / automate exiting reports;
• Support continuous improvement initiatives and master data governance;
• Undertake analysis of outputs and prepare detailed reports, both periodically and ad-hoc at regional and global level;
• Gather and analyze global benchmarking data to help strategic decisions based on costs and benefits;
• Development, programming, documentation, maintenance and improvement of the tools, dashboards, spreadsheets and Clarizen used by the Design and Construction team globally.
• Ensure that data received is harvested and incorporated into systems, in order to drive the mechanics behind the systems for Earned Value and world class cost reporting;
• Develop historic trend analysis, tools and processes for accurate cashflow forecasting;
• Collation and tracking of both YTD program and project-specific KPI performance data;

Sound like you? To apply you need to have:

Experience

• Educated to degree level in Architecture, Civil Engineer or Industrial Engineer discipline such as Bachelors of Science in Information Technology and/or Real Estate. Master in Data Science, Big Data and Business Analytics is a plus;
• Minimum of 3 years´ experience of working for a consultant or general contractor, preferably in multi-cultural corporate environment in a similar role;
• Experience working in a complex multidisciplinary team of stakeholders across region;
• Proficiency in data analysis and visualization using tools such as Adaptive Work, Tableau, Power BI or Smartsheet.
• Desirable – Program Management Organization and International Fit out experience;

Skills

• Strong analytical, communication (both written and verbal), facilitation and presentation skills; understanding of business intelligence concepts and methodologies.
• Proficiency with Microsoft Office Suite, including Word, Excel, and Power Point;
• Good planning and organizational skills, including multitasking, time-management, and handle a high-pressure working environment;
• Excellent analytical and problem-solving skills, with the ability to translate data into actionable insights;
• Able to work with a team and independently, have experience in working with remote teams and stakeholders;
• Have strong interpersonal skills with the ability to interact with project teams – in-house and external;
• Candidate must demonstrate personal impact and gravitas, with high velocity & speed of response and a proactive;
• Positive, solution-oriented communications and a willingness to take responsibility;

Maersk is a global leader in integrated logistics and have been industry pioneers for over a century. Through innovation and transformation we are redefining the boundaries of possibility, continuously setting new standards for efficiency, sustainability, and excellence.

At Maersk, we believe in the power of diversity, collaboration, and continuous learning and we work hard to ensure that the people in our organisation reflect and understand the customers we exist to serve.

With over 100,000 employees across 130 countries, we work together to shape the future of global trade and logistics.

Join us as we harness cutting-edge technologies and unlock opportunities on a global scale. Together, let's sail towards a brighter, more sustainable future with Maersk.

We offer

This is an exciting career opportunity in an international, challenging business setting known for diversity and being a high paced environment. You will get to focus on creating valuable relations with current and new customers and work with highly professional teams in an environment where you will be valued, recognized and well rewarded. You will work with amazing and diverse colleagues with a deep sense of commitment to live Our Values and together, go all the way for our customers, society and for each other

Key responsibilities

Reporting to the Regional Facility Design Engineering Manager EUR & APA, you are responsible for the design and layout optimisation of all strategic asset investments in the warehousing and fulfilment space for Maersk. You will work closely with cross-functional teams to create efficient and cost-effective warehouse layouts. If you thrive in a complex, high-paced environment then this role could be for you.

• End-to-end ownership of engineering management of all construction projects, from pre-project to completion.
• Create and optimize warehouse layouts, including racking systems and material handling equipment, to maximize space utilization and minimize bottlenecks.
• Dive deep on technical details and provide value engineering and innovative solutions to drive frugality and continuous improvements
• Lead technical design reviews and propose design solutions that meet both business needs and global design standards.
• Collaboration with Global and Regional stakeholders to ensure timely Engineering resources allocated during the Investment process.
• Key link to Solution Design, Procurement, Delivery, HSSE, IT and other internal stakeholders.
• Ensure that warehouse designs and modifications adhere to all relevant safety and compliance regulations.
• Collaborate with suppliers and contractors to source and implement the necessary equipment and systems required for the warehouse projects.
• Create, submit and track relevant CAPEX requests (Capital Planning) to ensure that all projects are delivered within budget and best overall value
• Maintain comprehensive documentation of warehouse designs, project plans, and equipment specifications.
• Assess and communicate project status, drive escalations on potential risks and delays across multiple teams.
• Identify opportunities for continuous improvement and implement best practices to enhance warehouse design and performance.
• Assist in providing equipment specifications and technical support to Procurement, Change Management and other business partners for best value and competition.

We’re looking for

• Relevant Education background in engineering, architecture, building sciences or relevant subjects.
• Experienced in facility design for the construction industry, ideally in Logistic infrastructure is required.
• Proficiency in MS Excel, CAD, and MS Project
• Knowledge about automated material handling systems, packaging technologies and storage solutions is preferable
• Strong communication and interpersonal skills for effective collaboration with cross-functional teams and clients.
• The ability to handle multiple tasks in a constantly changing environment
• Ability to resolve problems with effective solutions
• Attention to details

If you're not in Singapore, feel free to apply from your home country within the Asia Pacific region. We're open to considering hires in other locations within the region, pending further discussion.

Maersk is committed to a diverse and inclusive workplace, and we embrace different styles of thinking. Maersk is an equal opportunities employer and welcomes applicants without regard to race, colour, gender, sex, age, religion, creed, national origin, ancestry, citizenship, marital status, sexual orientation, physical or mental disability, medical condition, pregnancy or parental leave, veteran status, gender identity, genetic information, or any other characteristic protected by applicable law.
We are happy to support your need for any adjustments during the application and hiring process. If you need special assistance or an accommodation to use our website, apply for a position, or to perform a job, please contact us by emailing [email protected].

1. Experience in mining and sprayed concrete lining (SCL) works in tunnelling projects in Singapore or abroad
2. Perform, review and interpret instrumentation monitoring readings for surface and subsurface monitoring
3. Evaluate engineering team’s SCL design and recommend design changes based on subsurface ground conditions
4. Assess geotechnical conditions and ground behaviour during and after each round of excavation
5. Represent main contractor to liaise and coordinate with SCL design team, main contractor, LTA, MOM and other relevant authorities
6. Review and propose appropriate and suitable mining method proposal, design, methodology and solutions based on monitoring findings
7. Review risk assessment and design contingency plan and procedures for emergencies