Total 38 maintenance engineer service job vacancies in Art / Design / Entertainment category in changi road singapore

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

Alternate Tone Music School is a music community made for everyday people that aspire to learn music. Our courses include guitar, pop piano, bass guitar, music production, song writing and DJ lessons. Our goal is simple, we want to help people discover what creativity looks like on them.

If you are interested to join us in our mission in creating good vibes and a mold-breaking learning environment, please continue reading to find out more about our application process.

visit our website to find out more:
www.alternatetone.com

Position:

Course Coordinator Cum Admin Full Time

Salary:

Full Time: $2,400 - $3000

Working Hours Requirement:
weekdays:12pm to 9pm

Weekends: 930am to 630pm

4 weekday and 1 weekend.

Our Location: 29B Seah Street, S188385. Located in town (near city hall & bugis MRT)

Course Coordinator Cum Admin Job Scope:
Customer Service

Course coordinating
Lesson Scheduling
Admin & Data Entry
Payment collection
Facility Management

Skill Set Preference:
Customer Service, Adobe Photoshop, Adobe illustrator, Content writing, basic Video and Photo editing

Prefer applicant that has the skill set mention above however it is not a prerequisite to apply

How To Apply?
Submit Resume via Careersfuture or email.

Resume must include the following:

Past work experience
Education level

Do you have any musical background? If yes, please elaborate.
Tell us more about you

Contact details (Mobile number and email)

We know you might be eager to find out more about the job over the phone. however, the application is via email only.

Our client is in construction industry (Grade A1 Contractor/ Class 1 General Builder) and they provide full suite of integrated construction services and solutions in both the public and private sectors.

JOB DIMENSION (SCOPE)

• Coordinate design drawings with consultants to comply with requirements of the authorities.
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities.
• Supervise a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans
• Assist in doing tenders.
• Participate, work closely and give support to safety personnel at site on all initiatives/ matters relating to Safety and Health
• Comply with the Company Safety Management System and the WSHA and its subsidiary legislation

REQUIREMENT

• Possess Degree in Civil Engineering recognised by PE Board with minimum 2 years of relevant working experience preferably in construction firm
• Manage consultant design changes and maintain good documentation
• Resolve technical issues independently, analytical, high motivated with excellent team spirit and interpersonal skills
• Candidates with design experience will be added advantage

Job Summary:

The Cloud Operations Architect will lead and manage troubleshooting, support, and operations across various domain teams, ensuring the seamless implementation of Day 1 cloud solutions and the effective management of Day 2 operational support.

Key Responsibilities

• Lead and manage end-to-end troubleshooting and support across domain teams for both Day 1 implementation and Day 2 operations of Cloud Operations.
• Architect, implement, and maintain large-scale IT projects in complex environments.
• Provide solutions and resolve issues related to cloud technologies and third-party integrations.
• Leverage expertise in Microsoft Azure technologies to design scalable, secure, and efficient cloud architectures.
• Collaborate with Senior Management and stakeholders to articulate technical decisions and provide data-driven insights.
• Stay updated on emerging technologies, platforms, and best practices, particularly in cloud, microservices architecture, and software development.
• Drive the adoption of cloud best practices, ensuring adherence to industry standards and organizational objectives.
• Facilitate knowledge sharing and mentorship within teams to enhance technical competencies.
• Proactively identify and mitigate risks to ensure high-quality delivery.

Mandatory Skills and Qualifications

Experience:

• Minimum of 10 years of experience in architecting IT projects in large-scale environments.
• Demonstrated expertise in cloud technologies, especially in Microsoft Azure.

Certifications:

Relevant Microsoft Azure certifications (e.g., Azure Solutions Architect Expert is highly advantageous).

Technical Skills:

• Strong knowledge of Microsoft .NET technologies or equivalent.
• Proficiency in microservices architecture, cloud computing, and software development best practices.
• System thinking skills with the ability to visualize and design holistic architectures.

Key Responsibilities:

• Collaborate with the front-end design team to complete chip floorplan, clock architecture, and power plan.
• Take ownership of physical design tasks, including P&R (Place and Route), formal verification, static timing analysis, physical verification, power analysis, and design for reliability.
• Manage the full backend design flow, ensuring that designs meet all specifications and constraints for successful tapeout.
• Research and develop methodologies for advanced process nodes in physical design.
• Build and optimize automated physical design platforms to enhance efficiency.
• Write and maintain scripts (TCL, Perl, or Python) to support design tasks and tool automation.
• Work with EDA tools to perform analysis and optimizations, ensuring the quality of physical design and compliance with industry standards.

Required Qualifications:

• Extensive experience in the digital backend design field, with a focus on physical design, P&R, static timing analysis, and verification.
• Strong expertise in physical design methodologies for advanced process nodes.
• Proficient in scripting languages such as TCL, Perl, or Python to automate tasks and build platforms.
• In-depth knowledge of EDA tools used in physical design, such as Cadence, Synopsys, or Mentor Graphics.
• Experience with design for reliability, power analysis, and physical verification.
• Proven track record of successful tapeouts and deep understanding of the full backend design flow.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Job Description & Requirements

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, STRAP, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Our client is in construction industry (Grade A1 Contractor/ Class 1 General Builder) and they provide full suite of integrated construction services and solutions in both the public and private sectors.

JOB DIMENSION (SCOPE)

• Coordinate design drawings with consultants to comply with requirements of the authorities.
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities.
• Supervise a team of BIM Modelers to produce coordinated shop drawings and Concrete Body Plans
• Assist in doing tenders.

REQUIREMENT

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors.
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 3 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills.

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, STRAP, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

Our client is in construction industry (Grade A1 Contractor/ Class 1 General Builder) and they provide full suite of integrated construction services and solutions in both the public and private sectors.

JOB DIMENSION (SCOPE)

• Coordinate design drawings with consultants to comply with requirements of the authorities.
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities.
• Supervise a team of BIM Modelers to produce coordinated shop drawings and Concrete Body Plans
• Assist in doing tenders.

REQUIREMENT

• Possess a Degree in Civil/ Structural Engineering with relevant design working experience with contractors.
• Preferably a Professional Engineer registered with the Professional Engineers Board, Singapore
• At least 3 year(s) of working experience in the related field is required for this position.
• Be conversant in British & Singapore Design Standards
• Be independent, analytical, highly motivated with excellent team spirit and interpersonal skills.

Job Desription

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Job Desciption

• Knowledge in AutoCAD
• MS Office
• Well versed and relevant design experience in at least one or more systems in telecomunication

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Desription

• To ensure that the Engineering designs are in compliance with project specific requirements, and in-line with the Engineering Standard Practice, Company’s ISO procedures, national and international engineering norms, codes, and safety requirements.
• Generate block diagrams, bill of materials, functional design specifications, design calculation, wiring drawings, and all other documents and drawings as required by project and necessary to ensure equipment can be procured, integrated, tested, installed and handed over to the customer on schedule.
• Ensure equipment supplied for a specific project is technically compliant with relevant specification requirements, project technical standards, correctly configured and completed.
• Ensures equipment specified and designed can be successfully integrated with other equipment with which it has to interface to.
• Produces test procedure documentation appropriate to project commissioning.
• Provides technical support to system assembly and integration team.
• Perform other ad-hoc duties as assigned by the Projects & Retrofit Manager / Assistant Manager

Job Desciption

• Knowledge in AutoCAD
• MS Office
• Well versed and relevant design experience in at least one or more systems in telecomunication

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Location: Singapore (On-site)
VISA STATUS: Preferable Singaporean or Resident Holder

Key Responsibilities:

• Design Microgrid Systems: Integrate renewable energy sources, energy storage, and load management.
• Optimize Systems: Perform detailed design, develop electrical schematics, and ensure seamless converter and controller integration.
• Develop Embedded Solutions: Create logic for microgrid control, program microcontrollers, and configure control devices.
• Analyze and Innovate: Conduct performance analysis, optimize systems, and stay ahead of technology trends.
• Ensure Compliance: Adhere to standards (IEC, IEEE) and prepare regulatory documentation.
• Engage and Educate: Collaborate with customers, present proposals, and conduct training.

• Bachelor’s or Master’s in Electrical Engineering, Renewable Energy, or related field.
• Proven expertise in microgrid system design and embedded systems.
• Knowledge of energy storage technologies and converter selection.
• Proficiency in design software (HOMER, PVSyst) and programming (C/C++, Python).
• Strong problem-solving and communication skills.

Job Description

• Develop detailed plans and architectures for radio frequency translation.

• Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption to ensure the design is robust and predictable.

• Collaborate with CAD engineers to implement PCB designs, emphasizing clean power supply and interconnects for required EMI and RF transmission performance.

• Participate in design reviews and prepare documentation at all stages of development through to final prototype testing and characterization.

• Conduct parametric evaluation of transceivers including Pout, IMD/IP3, EVM, and noise parameters using spectrum analyzers, modulation analyzers, and perform wireless link-level functional evaluations to complete product characterization

• Collaborate with product engineers on certification procedures, New Product Introduction (NPI), and Transfer of Technology (ToT) for large-scale production.

Job Requirements

• Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering.

• Minimum 4 years of experience as an RF system hardware engineer with a proven track record of meeting industry delivery standards in relevant areas.

• Strong interpersonal and creative skills, able to multitask in a demanding and fast-paced environment.

• Hands-on experience in designing and integrating RF, Analog, and Mixed Signal blocks such as PA, LNA, mixer, frequency synthesizer, filter, coupler, detector, microcontroller, etc., with knowledge of deriving specifications from system-level requirements.

• Experience with basic CAD tools and proficiency in evaluation workflows and operation of relevant test equipment to assess product performance

. • Experience in script writing (e.g., Bash, Python) is advantageous for test automation.

Please be informed that if you are interested in applying for a position, please email your resume in either Word or PDF format to [email protected]. In your resume, kindly include the following details:

1. Current Salary:
2. Expected Salary:
3. Availability:
4. Reason for leaving your current job:

Thank you for your application. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you hereby acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)

Job Description

• Develop detailed radio frequency translation plans and architectures.

• Assess gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption to ensure robust and predictable design execution.

• Collaborate with CAD engineers to guide PCB implementation focusing on clean power supply design and interconnects to meet EMI and RF transmission requirements

. • Participate in design reviews and document progress at each development stage up to final prototype testing and characterization.

• Evaluate transceiver parameters such as Pout, IMD/IP3, EVM, and noise characteristics using spectrum analyzers and modulation analyzers; conduct wireless link-level functional evaluations for product characterization

. • Work with product engineers on certification procedures, New Product Introduction (NPI), and Transfer of Technology (ToT) for large-scale production.

Job Requirements

• Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering.

• Minimum 8 years of experience as an RF system hardware engineer, demonstrating a track record of meeting industry delivery standards in relevant domains.

• Strong interpersonal and creative skills, capable of multitasking in a dynamic and demanding environment.

Please be informed that if you are interested in applying for a position, please email your resume in either Word or PDF format to [email protected]. In your resume, kindly include the following details:

1. Current Salary:
2. Expected Salary:
3. Availability:
4. Reason for leaving your current job:

Thank you for your application. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you hereby acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)

Job Description:

• Collaborate with the front-end design team to finalize chip floorplan, clock architecture, and power plan.
• Lead physical design tasks from Netlist to GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability, and tapeout.
• Research physical design methodologies for advanced process nodes and develop an automated physical design platform.

Requirements:

• Bachelor's degree or higher in Electronic Engineering, Microelectronics, or Computer Science.
• Minimum 5 years of experience in digital backend design.
• Hands-on project experience is essential.
• Tapeout experience in advanced technologies preferred (consideration for exceptional candidates with 3+ years of experience).
• Proficiency in TCL, Perl, or Python script development and familiarity with EDA tool design is a plus.
• Strong communication skills, self-confidence, and motivation.
• Bilingual proficiency with a strong teamwork ethic.
• Salary negotiable for outstanding candidates.

Please be informed that if you are interested in applying for a position, please email your resume in either Word or PDF format to [email protected]. In your resume, kindly include the following details:

1. Current Salary:
2. Expected Salary:
3. Availability:
4. Reason for leaving your current job:

Thank you for your application. Please note that only shortlisted candidates will be contacted for further consideration.

By submitting your application or resume, you hereby acknowledge and consent to the collection, use, retention, and disclosure of your personal information by us to potential employers through our services.

EA (23S1595/R23116355)

· Coordinates construction engineering activities to ensure that projects are implemented in accordance with plans, designs and specifications

· Interprets structural drawings for implementation in construction projects

· Reviews design and discusses modifications with consultants, providing engineering input and alternative methods to address construction challenges

· Raised RFI (Request for Information) on any discrepancies and ambiguities in the design drawings

· Works with construction team, including project managers, site engineers, architects and electrical and mechanical engineers to explain drawings, specifications and other technical information to answer their clarifications

· Conducts regular technical meetings with consultants and client to discuss and resolve construction issues

· Manages structural drafters and reviews shop drawings to ensure these are in compliance with the project specifications

· Monitors changes to designs, assessing effects on cost and assisting with variation negotiations

Maintained up to date documentation and filing system of all relevant technical reports and submissions, drawings and specifications

Reporting to the Director of Engineering, successful applicant will be the subject matter expert in switching mode power supply design and solution. The incumbent will be involved in solutioning and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product. 

Responsibilities

• Design new platform solution for power supply & power system products within XP standard design practice, safety guidelines and in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost.
• Lead project planning to identify critical path(s) and provide direction to mitigate risk.
• To perform tests and experiments as needed to support or confirm the design with written report. For both the new product design and legacy product failure analysis
• Reviews product designs for compliance with engineering principles, company procedures, safety, and other agency requirements
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to internal/external customer.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging.
• Provide technical support to factory on design related issue.
• Provide coaching and guidance to engineers and technicians in evaluation and design.
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training.
• Provides technical direction to the team.

Roles & Responsibilities

Job Description

Overall Job Purpose

• The engineer is to act as Electrical Commissioning Lead (entire Electrical Systems Lead), manage all Electrical system commissioning from preparation phase to execution phase.
• During commissioning preparation phase, responsible to attend Supplier Kick Off meetings to roll out package related commissioning requirements, review of Supplier documents, review ITR assignment and provide inputs for commissioning schedule.
• Prepare and review system boundary, commissioning procedures and commissioning deliverables.
• Support Commissioning Manager and Commissioning Project Engineer in the preparation of required tools, utilities, first fills and others for the commissioning activities of Electrical systems.
• Electrical Commissioning Lead is responsible for successful and safe commissioning of their area / system following the commissioning strategy set by Commissioning Manager.
• At times may act as a responsible commissioning engineer (owner) for few major systems in the area
• Work closely with MC Coordinator, Commissioning Coordinator for timely completion of the ITRs, mechanical completion and commissioning completion.
• Supervise day-to-day electrical commissioning activities are complied with Company’s Standards and Procedures.
• Identify and integrate Safety, Quality requirements in the electrical commissioning activities to ensure safe operability and maintainability.
• Understands the Completions philosophy and Scope of Work by studying the applicable industry standards, Company standards, specifications and procedures.
• Manages electrical commissioning PTW, electrical commissioning engineers, assigned technicians, operations support, supplier support and CLASS witness to execute the approved commissioning procedure including performance standards verification successfully, sign off the test reports and support for the system dossiers completion until handover.
• Studies the complex Company’s standards, business, operations and practices as well as engineering work matters/systems/procedures/standards within the tight project schedule in order to develop commissioning deliverables.
• Applies effective communication in discussions with various disciplines and departments in order to clarify complex information which is required as input for commissioning deliverables.
• Is expected to work independently and lead electrical commissioning team in order to complete the work schedule and fulfill the project timelines.

Requirements

• Bachelor in Engineering (Electrical)
• 7 years and above of relevant working experience in FPSO commissioning.
• Analytical skills
• Taking ownership
• Communication skills (written & verbal)
• Teamwork
• Professionalism
• Awareness about business process

Your assignment

• Know and understand the customers’ shopping behaviour, retail trends & life at home and use this knowledge to provide the relevant solutions for our customers

• Ensure that sales and profitability is secured through sales steering and range efficiency to maximise growth

• Know the key barriers and facilitate an easy buying process for my customers.

• Provide feedback to secure commercial opportunities in a multi-channel environment and work actively to help sell in all channels

• Ensure that area of responsibility is in excellent shape as new, fully stocked and that a high level of merchandising basics is always in place.

• Take responsibility to achieve the goals set for my area of responsibility

• Contribute towards improving the customer experience in the store and maintain a high level of service standard with a “First time right” mindset

• Conduct/Support product knowledge trainings for co-workers related to a product range.

• Ensure Balance operational excellence in daily operations to enhance the easy buying experience in line with commercial review requirements

• Support a customer-friendly and efficient execution of the payments, exchange & returns and click and collect process.

Your assignment

• To know and understand the customers’ shopping behaviour, retail trends & life at home and use this knowledge to provide the relevant solutions for our customers;
• To ensure that sales and profitability is secured through sales steering and range efficiency to maximise growth;
• To know the importance and actively work with replenishment proposal- securing the right parameters to ensure product availability ;
• To ensure that my area of responsibility is in excellent shape as new, fully stocked and that a high level of merchandising basics is always in place;
• To contribute towards improving the customer experience in the store and maintain a high level of service standard with a “First time right” mindset;
• To support a customer-friendly and efficient execution of the payments, exchange & returns and click and collect process.

· Coordinates construction engineering activities to ensure that projects are implemented in accordance with plans, designs and specifications

· Interprets structural drawings for implementation in construction projects

· Reviews design and discusses modifications with consultants, providing engineering input and alternative methods to address construction challenges

· Raised RFI (Request for Information) on any discrepancies and ambiguities in the design drawings

· Works with construction team, including project managers, site engineers, architects and electrical and mechanical engineers to explain drawings, specifications and other technical information to answer their clarifications

· Conducts regular technical meetings with consultants and client to discuss and resolve construction issues

· Manages structural drafters and reviews shop drawings to ensure these are in compliance with the project specifications

· Monitors changes to designs, assessing effects on cost and assisting with variation negotiations

Maintained up to date documentation and filing system of all relevant technical reports and submissions, drawings and specifications

Job Description :

1) Analysis and design of civil structures covering both structural and geotechnical (Bridge design/Drain Design/Slope Stability analysis/ Settlement calculation/ Temporary Steel Structure design/ Soil parameter evaluation etc.)

2) Ensure all engineering works comply with all relevant statutory standards, regulations and codes of practice.

3) Assist team leader to achieve set target without compromising quality standards of design and supervision works.

Job Requirements:-

1) Bachelor degree of Engineering in Civil and Structural/Geotechnical Engineering

2) Well-versed in civil and structural design software e.g. Staad Pro/GeoStudio/Plaxis/HECRAS/Auto CAD

3) Contract duration of 2 years

The Design Engineer will play a pivotal role in the planning, conceptualization, and execution of construction projects. This position involves close collaboration with architects, clients, and various stakeholders to ensure the delivery of functional, safe, and compliant construction solutions. The ideal candidate will possess a strong foundation in engineering principles, proficiency in CAD software, and a commitment to innovation and problem-solving.

Responsibilities

• Work closely with the design manager, architects, clients, and stakeholders to understand project requirements and develop initial design concepts and solutions.
• Utilize CAD software to create detailed technical drawings and specifications, ensuring compliance with building codes, standards, and regulations.
• Perform structural assessments to assess building requirements, selecting appropriate materials and systems based on load, stress, and deflection evaluations.
• Research and select construction materials considering durability, cost, sustainability, and performance, while minimizing environmental impact.
• Engage in productive collaboration with architects, contractors, and other stakeholders throughout the design and construction process, providing technical support and expertise.
• Troubleshoot design challenges, offering practical solutions to ensure smooth project execution and address conflicts between design intent and on-site realities.
• Oversee quality assurance processes to ensure construction meets design specifications and industry standards.
• Optimise design decisions for cost-effectiveness without compromising on quality or safety.
• Maintain accurate documentation of design revisions, calculations, and project correspondence for reference and compliance purposes.
• Upkeep drawing lists, and design changes.