Total 1,695 product engineer job vacancies in Art / Design / Entertainment category in Singapore

Responsibilities:

• Monitor Soil Investigation to get correct geotechnical design inputs for design.
• Foundation recommendation report preparation including backup calculation (In all types of soils & rock)
• Pile capacity calculations in various soils/rocks. Test pile location plan/ Pile reinforcement calculations & drawing preparation. Validation of pile capacity by Pile load test (Vertical / Lateral / Pull out).
• Piled Raft design using the latest design tools and theories.
• Design using PLAXIS 2D Software (Sheet pile with structure waler /Diaphragm wall-structure/contiguous pile with soil/rock anchor)
• Design of all components like Anchor capacity, water & structure design, modeling top-down method of construction.
• Dewatering system design. (Wellpoint, Drawdown calculations, Open dewatering).
• Seepage control techniques like Jet -Grouting, slurry wall & flow net calculations.
• Soil improvement using stone column
• Design of stone columns, settlement calculations & Liquefaction calculations.
• Swelling soil management techniques.
• Back Fill material specifications & various compaction techniques used for different backfill materials.
• Slope stability calculations and analysis

Requirements:

• Bachelor’s Degree/Diploma in Civil Engineering
• Min 5 years of relevant design experience in Geotechnical design
• Hands-on experience using analysis & design tools like PLAXIS 2D/3D, SLOPE/W, A-PILE & L-PILE is required.
• Knowledge of STAAD Pro, SAFE, ETABS will be an added advantage.
• Ability to work independently as well as in a team.
• Ability to manage tasks as per priorities.
• Good verbal and written communication skills

For a confidential discussion please send your cv to [email protected]

To view more roles within the Construction & Engineering | Project Management Sector please visit our LinkedIn page @ Artemis Executive Solutions or https://www.careers-page.com/artemisexecutivesolutions We thank you for taking the time to apply but due to the high volume of applicants, we regret to inform you that only shortlisted applicants will be contacted.

EA Lic. No. 23C1598 | R1330228

Our client is one of the leader in the semi-con industry, they are hiring a SOC PHysical design engineer to join the team and it will be a 12 month contract.

Job Responsibilities:

• Responsible for physical design, development for variety of SoC(System On Chip) and tapeout.
• Execute state-of-art methodologies include, floor-planning, place and route, RC extraction, timing and power optimization, physical verification.
• Doing benchmarking on Performance/Power/Area to validate the robustness of APR flow.
• Enhance project efficiency by using scripting language like Perl, TCL, Python etc.
• Provide feedback to flow development team for company flow enhancement.

Requirement:

• Bachelor of Science and above degree with microelectronics background.
• Open to fresh graduates and/or at least 2 years of physical design related experience.
• Willingness and ability to travel as needed.
• Be able to demonstrate you have the ability to prioritise, organise work, meet deadlines, multitask.
• Good communication and teamwork, able to work under pressure.

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E EA License No. 01C4394 • EA Registration No. R21103542 (Ling Kai Jin)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 4 years of hands on / research experience with digital backend ICs circuit design / physical design
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design

If you are interested in the position , kindly send your CVs in to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Senior Design Engineer
5 days
9am-6pm
Kallang
Up to $7000

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :
  1) Design of automation or semiconductor equipment
  2) High precision machine design
  3) Design of High Speed Pick and Place mechanisms
• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Lim Jun Yao

Reg No: R1989028

The Supreme HR Advisory Pte Ltd

EA No: 14C7279

Job Summary

The successful candidate will be responsible for the creation of tooling concepts and the design of plastic Injection molds, detailing high-performance molds in 3D.

Responsibilities

• Design projects from concept thru final details
• Interacting with customers – conference calls to on-site design reviews
• Working with the shop to distribute and communicate the requirements of the project
• Participate in the First-Off Tool review and assess the suitability of the tool for production
• Report to upper management
• Identify technical risks and define mitigation plan
• Travel internationally to customer or supplier sites as projects require
• Resolving out-of-spec issues
• Be required to mentor and develop junior engineers as necessary
• Perform other duties as assigned

Requirement

• Diploma in Precision Engineering, Mechanical, Manufacturing and/or any relevant engineering discipline with 7 years of relevant working experience
• Expertise in 3D modeling and knowledge in GD&T
• Experience in with evaluating and analysing tooling issue
• Proficient in AutoCAD and Unigraphics
• Familiar with Design for Manufacture (DFM) who able to develop complex designs to the point of manufacture and release to production
• Knowing the manufacturing processes and has the knowledge in plastics and elastomers
• Experience in unscrewing, multi-shot, stack and high tolerance moulds, including mechanical design
• Proficient in Microsoft Office applications
• Excellent organizational and communication skills, including effective presentation of complex data
• Good leadership skills and a team player
• Flexible attitude towards work and eager to learn new skills
• Must be willing to work overtime as required

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP). This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement.

Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP.

AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure.

You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP

You can apply here: https://aces.aceplp.com.sg/apply/nt/

Responsibilities:

• Collaborate with consultants to align design drawings with regulatory requirements.
• Create technical submissions for materials, construction methods, and structural shop drawings
• Address construction issues on drawings and maintain close communication with Architectural, M&E teams, and regulatory authorities.
• Evaluate and propose solutions for technical challenges, while planning, monitoring, and reporting the progress of shop drawing production
• Oversee a team of BIM Modelers responsible for generating coordinated shop drawings and Concrete Body Plans.

Requirements:

• Min Degree in Civil Engineering or it's equivalent
• At least one year related working experience
• Professional Engineer registered with the Professional Engineers Board, Singapore is an added advantage
• Have familiarity with British and Singapore Design Standards.

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Responsible for the creation of innovative product designs and improvement/development to existing product designs.
• Regularly engages with third parties (e.g. customers, suppliers, vendors, etc), contributing to the technical specifications development.
• Responsible for various aspects of projects and collaborates with support teams to develop operational procedures.
• Management of engineering design modifications, involving the review as well as approval of engineering’s drawings.
• Proficient in appointed meetings to ensure the compatibility, interfaces, and functionality of relevant components within associated systems.
• Attends project meetings, where technical details are presented.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum Degree in Engineering or equivalent
• Minimum 6 years’ relevant working experience
• Understanding of various industry standards and offshore operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Responsibilities:

• Create detailed design drawings using AutoCAD Software and Revit.
• Collaborate with architects and other engineering disciplines to develop and modify design concepts.
• Review and analyze design specifications and requirements.
• Prepare accurate and comprehensive design documentation.
• Coordinate with project teams to ensure timely completion of design deliverables.
• Conduct quality checks on design drawings to ensure compliance with standards and codes.
• Stay updated with the latest software tools, techniques, and trends related to AutoCAD and Revit.
• Assist in the development and implementation of design standards and procedures.
• Support in coordinating design activities and resolving technical issues.

Requirements:

• Degree or Diploma in Engineering or related field.
• Proficient in AutoCAD Software and Revit.
• Excellent attention to detail and accuracy.
• Effective communication and interpersonal skills.
• Ability to work independently as well as with a team environment.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Job Description:

- Design and develop electronics hardware and embedded software for defense products.

- Collaborate with other engineering teams to implement firmware, drivers, and protocols for embedded systems.

- Write and maintain codes for embedded system using C/C++.

- Design, test, and debug electronic circuits and PCBs.

- Select and source electronics components for new product designs.

- Participate in code reviews and design discussions.

- Ensure software is designed for maintainability and scalability

Job Requirements:

- Degree in Electrical/ Electronics Engineering, Computer Engineering or a related field.

- Fundamental skill in C/C++ and real-time operating systems.

- Knowledge of microcontrollers, microprocessors and digital signal processors.

- Good understanding of electronic circuit design and PCB layout tools.

- Good problem-solving and debugging skills.

• Remuneration package: Up to $5,200 Basic + AWS + Variable Bonus

• Working location: Woodlands

• Over 30 years of Reputable Automation Engineering Company

Responsibilities

• Provide a key role in the design, development & testing of industrial robotic machines & equipment
• Responsible for producing schematic drawings, creating electrical control systems, ensuring proper setup & tunning of control systems, & sourcing of control components

Requirement

• At least 2 years of experience in Electrical Control Engineering
• Experience in design & developing of electrical control system
• Proficiency in PLC is an advantage
• Experience in programming motion controllers, touch panels and robot is an advantage

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to

[email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street, #08-09 PLUS Building Singapore 049705

EA License Number: 02C4944

Registration Number: R1217882

Posting Personnel: Yeo Yi Rong

Responsibilities:

• Design, optimize, and document hardware components, including PCB layout and schematic capture.
• Test, debug, and enhance hardware performance.
• Develop schematic and PCB libraries, and compile Bill of Materials.
• Support product certification and approval processes.
• Assist with product issues during production and service phases.

Requirements:

• Bachelor's Degree Engineering
• Minimum 5 years of Hardware Design, Validation, & Optimization experience.
• Proficiency in high-speed digital board design and interfacing with bus standards.
• Experience in Analog Circuit Design & Simulation and developing complex CPU and microcontroller-based systems.
• Proficient in Design Tools (Altium Designer, Pads, Allegro/OrCAD), Microsoft Office, JIRA, VHDL, Linux.

If you are interested in the position, kindly send your CVs to sean.ho(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving your current job.

We regret that only shortlisted candidates will be contacted. Applicants must be fully vaccinated or have a valid exemption in accordance with MOM’s regulations to allow them to enter the workplace. Applicants may be required to share verifiable COVID-19 vaccination documents or proof of a valid exemption at the point of offer. Randstad Pte. Limited and/or the Client reserves the right to withdraw an offer if the applicant fails to provide verifiable COVID-19 vaccination and/or proof of exemption documents.

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.


Responsibilities:

• Manage enterprise systems, emphasizing cyber security, and troubleshoot reported issues
• Coordinate with technology vendors for necessary escalations and conduct patching and updates for tools and systems
• Generate incident reports, maintain records of service level agreements for customers, and upkeep detailed technical documentation

Requirements:

• Extensive background in Operations Support
• Proficient in McAfee, Cisco, Microsoft, and Thales
• Ability to manage and execute projects in endpoint security, data loss prevention, and vulnerability management

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Interested Applicants
Please WA Bryan Tay @ 97559161
Shortlisted Candidates will be notified

Bryan Tay Reg No. R23112463
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Senior Design Engineer
• Working Location: Kallang
• Working Hours: Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $7,000 + VB
• Duration: Permanent

Key Responsibilities

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

APPLY NOW!!!

• Degree in Mechanical or Mechatronics Engineering with more than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas:

1.Design of automation or semiconductor equipment

2.High precision machine design

3.Design of High-Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle.
• Ability to work independently with high level of motivation and communicate with all levels.
• Equipment troubleshooting skills.
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #65782 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Responsibilities:

• Create detailed design drawings using AutoCAD Software and Revit.
• Collaborate with architects and other engineering disciplines to develop and modify design concepts.
• Review and analyze design specifications and requirements.
• Prepare accurate and comprehensive design documentation.
• Coordinate with project teams to ensure timely completion of design deliverables.
• Conduct quality checks on design drawings to ensure compliance with standards and codes.
• Stay updated with the latest software tools, techniques, and trends related to AutoCAD and Revit.
• Assist in the development and implementation of design standards and procedures.
• Support in coordinating design activities and resolving technical issues.

Requirements:

• Degree or Diploma in Engineering or related field.
• Proficient in AutoCAD Software and Revit.
• Excellent attention to detail and accuracy.
• Effective communication and interpersonal skills.
• Ability to work independently as well as with a team environment.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Job Responsibilities:

- Prepare material requisition lists for job requirements.

- Plan and design electrical switchboards, consoles and control panels according to customer's requirements and company standards.

- Prepare approval drawings, shop drawings, final drawings / documents, short circuit calculations, instruction manuals as required for submission to clients and shop floor production.

- Co-ordinate with clients and consultants on the technical requirements. Attend technical discussions with clients and consultants when required.

- Feed back to Sales & Marketing Department on the changes of technical requirements by clients for claims of additional costs and time.

- Check and follow-up on design and shop drawings with production departments.

- Develop and improve on design of electrical switchboards, consoles and control panels. While taking note of quality, standard, cost effective designs are to be considered.

- Assist and advise Sales & Marketing Department on technical matters, provide technical backup for securing of contracts.

- Carry out other responsibilities as and when assigned by the superiors.

- Follow the procedures of design control, documentation and data control, and quality system of the total Quality Management System

Job Requirements:

- Diploma in Electrical or equivalent

- 1 – 2 years of relevant experience

- No experience are welcome to apply

- Relevant experience with Switchboard Design

- Able to start work immediate

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: Automation Design Engineer (Based at Bintan)
• Working Location: Bintan
• Working Hours: Mon – Fri (8 am – 5 pm)
• Salary: Basic up to $4500 + Overseas Allowance + Variable Bonus (Expat Package)
• Duration: Permanent

Key Responsibilities

• Design and develop innovative automated machines to meet specific manufacturing requirements.
• Plan and execute automation and equipment systems design to optimize machine efficiency and reliability.
• Explore and implement strategies to enhance machine performance, particularly in cycle time and production output.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Preferably more than 2 years of experience in machine design and development within the Electronics industry.
• Experience in managing turn-key projects.
• Excellent working knowledge in Solidworks application.
• Demonstrated creativity in machine design.
• Strong team player who is self-driven and results-oriented.
• Willing to be posted to Bintan, Indonesia.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65867 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Description:

Follows established procedures and guidelines to design, install products and services that is required by the organization.

Responsibilities:

• Reviews /implements project/job specification.

• Review engineering documents for government submission and for construction.

• Carry out basic and detailed engineering design including calculations / analysis as per project requirements.

• Prepares and updates material take-off for project procurement and bid proposals.

• Assists in preparing cost estimate for tender proposal.

• Coordinates and cooperates with other disciplines on new process requirements, design interference check and design changes.

• Adheres to ISO, client and International Standards quality requirements in the execution of works as applicable.

• Instructs, supervises, manages and monitors the Designers in the course of work.

• Provides technical assistance to construction team.

• Attends site check/verification.

• Adheres to drawing checking procedure.

• Performs electrical calculations on cable sizing, system studies, etc.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Requirements:

• Preferably Degree in Electrical Engineering

• Preferably 5 years relevant working experience in design of plants related to projects in the Oil & Gas, Petrochemical, Chemical or Pharmaceutical Industries

• Well-versed in all local and international codes and standards on the related field

• Computer literate and good hand-on experience on applications such as Microsoft Office, CAD Drafting, Electrical design software,

• Ensure efficient Civil & Structural and Geotechnical design is achieved in accordance with Design Criteria and relevant standards
• Liaise with internal and external parties on all civil & structural and geotechnical design matters and advises the Senior Resident Engineer (SRE) / Senior Design Engineer (SDE) regularly
• Co-ordinate the review of Contractor's civil & structural and Geotechnical submission and assists the SRE/SDE in conveying a timely response to the contractor
• Identify and resolve potential design related issues during construction phase
• Carry out any other duties as required by the Authority's Project management team, including attending technical meetings and discussions, preparation of minutes of technical meetings and to provide technical meetings and technical support as required in the evaluations of Contractor's claifications.
• Ensure that the design intent is translated to construction on site by means of correct drawings and specifications

Requirement

• Minimum Degree in Civil/Structural Engineering or equivalent
• Minimum 3 years of relevant design management/coordination experience on projects similar in nature to the Works in the civil contract including design experience in geotechnical works for deep excavation foundation works
• Team player with good interpersonal and communication skills.

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Create detailed design drawings using AutoCAD Software and Revit.
• Collaborate with architects and other engineering disciplines to develop and modify design concepts.
• Review and analyze design specifications and requirements.
• Prepare accurate and comprehensive design documentation.
• Coordinate with project teams to ensure timely completion of design deliverables.
• Conduct quality checks on design drawings to ensure compliance with standards and codes.
• Stay updated with the latest software tools, techniques, and trends related to AutoCAD and Revit.
• Assist in the development and implementation of design standards and procedures.
• Support in coordinating design activities and resolving technical issues.

Requirements:

• Degree or Diploma in Engineering or related field.
• Proficient in AutoCAD Software and Revit.
• Excellent attention to detail and accuracy.
• Effective communication and interpersonal skills.
• Ability to work independently as well as with a team environment.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Responsibilities:

• Design and develop marine switchboards and electrical systems.
• Create detailed electrical design drawings.
• Collaborate with cross-functional teams to ensure design requirements are met.
• Review and analyze design specifications and standards.
• Perform engineering calculations to ensure switchboards meet safety and performance standards.
• Participate in design reviews and provide technical expertise.
• Assist in the testing and commissioning of marine switchboards.
• Stay updated with the latest industry trends and technology advancements.
• Ensure adherence to project schedules and deadlines.

Requirements:

• Degree in Electrical Engineering or related field.
• Experience in designing marine switchboards and electrical systems.
• Proficient in AutoCAD Software.
• Strong knowledge of electrical design principles and standards.
• Excellent problem-solving and analytical skills.
• Ability to work effectively in cross-functional teams.
• Good communication and interpersonal skills.
• Attention to detail and ability to meet deadlines.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Work closely with design engineers and architects to define, document and implement detailed test plans for the SoC design verification.
• Create and maintain infrastructure/environment for automation verification of SoC architecture, function and performance.
• Build reusable testbench, constrained-random/directed test cases, and verification associated behavioural modules for both block levels and system levels.
• Use regression strategy, methodology and tool scripts and measure the function coverage.

Requirements:

• Degree in Electrical/Computer Engineering or Computer Science or equivalent.
• At least 5 years of experience in building verification infrastructure, test planning, coverage closure, testbench and test cases development for function/performance verification.
• Strong knowledge of UVM/OVM, Semiformal Verification, assertion-based verification, hardware and software co-verification methodology.
• Proficient with Verilog, System Verilog, Python/Perl/TCL/Shell scripting, C/C++, System C and industry mainstream ISAs assembly coding.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocol, RISC-V/ARM or DSP core.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740