Total 21,691 mechanical engineer job vacancies in Engineering category in Singapore

• Project specifications, construction drawings and Building Control Act and Regulations.
• To be overall in charge of the management and control of a team of site staff or Resident Technical Officer(s)
• To provide administrative control on the site staff, instil and maintain discipline, and punctuality, keep daily records of staff attendance, keep records and process the staff leave entitlement, sick leave, in-camp training and other matter concerning the site staff administrative matters, discipline and welfare.
• To oversee in all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the Superintending Officer.
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• To inspect completed work and prepare defects list if necessary.

Requirements

• Degree in Civil and Structural engineering
• At least 5 years of civil engineering experience, of which 3 years must be of Geotechnical such as cut & cover tunnel and deep excavation works.

Possessed a valid RE Cert

Job Description & Requirements

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme withoutcompromising on quality and safety quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Any other ad-hoc tasks assigned by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project workPro-active team player with good analytical and communication skills

Required to have at least 2 years of viaduct and/or flyover construction

Job Description

We are looking for a motivated Embedded Engineer who has years of experience in embedded development. All Ackcio products have embedded firmware at their core and capabilities of this software play a key role in the appeal and usefulness of our products to customers. You would be responsible for timely execution of features and releases. We expect you to be engineering innovative capabilities to our product and ensure integration of our system with external partners from ideation to execution.

Core Responsibilities

• Understand Ackcio’s product requirement in detail and build a development roadmap.
• Work with the relevant stakeholders and team members in obtaining a deep understanding of the third-party integrations that are to be done.
• Ensure that the embedded design is optimized for the IoT constraints
  of energy, memory, and processing capabilities.
• Design automated test procedures and documentation for code and API.

Qualification Required

• Master or Bachelor's degree in Computer Science or related discipline
• At least 2 years of experience in embedded engineering
• Experience collaborating with a diverse team of electronics and embedded engineers to end-to-end solutions
• Comfortable with hands-on testing of embedded hardware, use of JTAG debuggers, oscilloscopes, serial data analyzers etc.
• Good understanding of embedded memory management (ROM, RAM, Flash)
• Excellent communication and problem-solving skills
• Self-motivated and driven to excel and deliver, able to handle stress with a positive attitude

Technical Skills Required

General project management

• Jira, Aha
• Sphinx or equivalent for code and API documentation

Development workflow

• Github and flow for workflow demands
• Linting

CI / CD

• Gitlab, Jenkins, or equivalent

Languages

• C/C++, Python

Operating Systems

• Contiki, FreeRTOS, TinyOS, Linux

Device Protocols

• UART, SPI, I2C, RS485, RS232, SDI-12, MODBUS, etc.

IoT Technology

• Wireless: LoRa, DigiMesh, BLE, etc.
• Application: COAP, MQTT, etc.

Perks

• Work with a talented team of a fast-growing, deep-tech startup.
• Cool working space with lots of friendly people.
• We are a tight-knit team (family) that grabs lunch together
• Be part of a deep-tech startup that is disrupting the market
• We are Great Place To Work certified in 2021!

Find us at https://www.ackcio.com/

Our client is a well-established MNC, market leader in the Assembly industry. They are looking for a Mechanical Desgin Engineer for the next phrase of their business. They are located in East.

Responsibilities

• Responsible in designing, constructing, and delivering assembly machines for clients.
• Collaborate closely with the Project Manager throughout the design and assembly stages of the machines.
• Develop concepts and assembly drawings for automation systems using Autodesk Inventor.
• Design pneumatic schematics for automation systems, including control valves, pneumatic grippers, and cylinders.
• Liaise with Debug and Control Engineers during the machine assembly process.
• Coordinate with suppliers such to integrate systems into Machines.
• Any ad-hoc duty as given

Requirement

• Min Diploma in Computer Science or Engineering
• Experience in manufacturing or automation related industry
• Experience in CAD system such as Inventor and AutoCAD

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Mandatory Skills

Required Skillset :

• Proficiency in managing logging stack such as Elasticsearch Cluster Management, Logstash, Filebeat, ILM, Kibana, Watchers and Dashboards
• Expertise in Prometheus and exporters, Grafana, Alertmanager, APM
• Knowledge in writing Promql queries and Grafana Dashboards implementation
• Expertise in CI/CD pipeline implementation
• Troubleshooting experience of java ,sprint , react applications. Dev skills would be handy.
• Hands on containerized platforms like Docker/Kubernetes
• Experience with source code control systems like Bitbucket
• Knowledge about High availability, Disaster Recovery and backup.
• Experience with Object Storage Systems like S3
• Providing L1/L2 production support to the systems.
• Experience with Linux systems configurations.
• Experience in Shell scripting and Python.
• Basic understanding of source control concepts, best practices, and the software development lifecycle.
• Strong verbal and written communication skills.
• Critical thinking and problem-solving skills.

Nice to have :

• Added advantage if knowledge on any of the following components Grafana Mimir, Tempo, Loki, Events, Profiling
• Understanding Terraform or Ansible
• Understanding reported vulnerabilities and fixes.
• Knowledge about Opensearch
• Open to explore new tool sets for observability
• Knowledge on PagerDuty and Incident Management

Key Responsibilities:

• Possess excellent communication skills to demonstrate and present the solution to the Customer, and the solution will also be made available for future troubleshooting and analysis recorded in proper documentation.
• Possess knowledge in IT networking and LAN to troubleshoot computer problems
• Image build management; Administration and configuration; End-user account management; End-user device hardening and lockdown; Trouble-shooting and problem resolution; and End-user briefings & awareness service.

Requirements:

• Diploma in a relevant field.
• Minimum 4 years EUCD Support, ICT End User Computing or Service Desk Agent experience with networking and system administration background
• Possess at least one (1) of the following certifications or equivalent: Microsoft related certification or CompTIA A+ related certification

Civil Engineer, Ducts & Manhole (indoor office-based)

Salary up to $5200

• To take charge of the Ducts and Manholes Implementation and Maintenance Works.

• To coordinate underground ducts and manholes implementation works with external parties.

• To support Plant Maintenance and Operation on Civil & Structural (C&S) matter

• C&S engineering SME

Responsibilities:

• New Development and Diversion of Services:

- Take charge and coordinate Service laying with main project team (Developer, Main Contractor) and authorities, including deconflicting with others for new build and diversion.

- Project Manage the implementation of underground ducts and Manholes within new development and service diversion.

- Review method statement and coordination drawings and other relevant construction documents.

• Review 3rd party submission on matters related to Netlink Underground Services

• Support Facilities and Maintenance team on Civil & Structural related issues.

• Participate in tender, contract administration

Requirements:

• Civil Engineering Degree with 3-year engineering/construction experience

• Diploma holders in Civil Engineering with extensive relevant experience will be considered

• Experience in infrastructure (Road works) projcts and its geotechnical aspects.

• Exposure in Service coordination with Authorities and Service providers

• Good understanding of Specifications, contracts and ability to read and interpret engineering drawings and engineering reports.

• Ablity to review Method statement. Ability to generate method statements is preferred.

To apply:

Please email Resume in Microsoft Word format

Please state your Position/ positions applied on the “on TOP” of your resume.

Please state Available Commencement Date or notice period

Please state current and last SALARY and Expected Salary in your resume.

Please state Reasons for leaving current & previous Employment.

• Civil & Structural/ Geotechnical design, analysis, and assessment for ground improvement work, foundation, excavation, earth retaining structures, slope, instrumentation, and site investigation.
• Plan, design, supervise, and coordinate for geotechnical/ civil engineering and infrastructural design and site works.
• Ensure all engineering works comply with all relevant statutory standards, regulations, and Codes of Practice.
• Liaison with project stakeholders, clients, other consultants, contractors, relevant authorities.
• Assist Team Leader in maintaining high-quality standards of design and supervision.

Job Requirements

• Bachelor of Engineering major/ interested in Geotechnical & Civil Engineering.
• Minimum 5 years design experience in Geotechnical & Civil engineering projects.
• Those with less than 5 years of design experience can be considered for the junior post.
• Familiar with geotechnical design in Eurocodes.
• Well-versed in civil & structural/ geotechnical design software such as Plaxis, TEDDS...etc.
• Familiar with Authorities' submission requirements for civil/ infrastructure engineering projects.
• Familiar with ground improvement works, civil ad structural designs and BIM will be an advantage.

Email CV to: [email protected]

• MNC Company (Semiconductor)
• Great Remuneration Package - Relocation assist provided (Accommodation and transport service provided)
• Entry level is welcome as On-job training provided
• Location : Chennai

Responsibilities:

Module Process Development and Optimization:

• Engage in the refinement and enhancement of manufacturing processes specific to modules.
• Identify areas for efficiency enhancement and implement improvements to attain optimal outcomes.
• Consumable Material Evaluation and Testing:
• Assess consumable materials for compatibility with manufacturing processes.
• Conduct comprehensive testing to verify the reliability and performance of consumables in the production setting.

Data Analysis, FACA, and DOE Testing:

• Conduct thorough data analysis to detect patterns, anomalies, and opportunities for enhancement.
• Apply Failure Analysis and Corrective Action (FACA) methodologies and perform Design of Experiments (DOE) testing to bolster process robustness.

Definition and Documentation of Standard Specification Documents:

• Develop and document standardized specifications for processes and materials.
• Ensure documentation completeness to enable consistency and adherence to quality standards.

Resolution of Technology Issues to Enhance Process Yield:

• Investigate and resolve technology-related challenges affecting process yield.
• Collaborate with cross-functional teams to deploy solutions and continually enhance overall production efficiency

Requirements:

• Min. Diploma in Engineering Science
• Proven experience in assembly, film lamination, glue binding, wet clean, or laser processes.
• Familiarity with quality control and process optimization techniques.
• Ability to troubleshoot and implement improvements in manufacturing processes.
• Good analytical and problem-solving skills.
• Effective communication and collaboration skills for cross-functional teamwork.
• Adherence to safety protocols and regulatory requirements.
• Continuous improvement mindset to enhance efficiency and product quality.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected] or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Hooi Wai Man (Samantha)

EA Personnel Reg No: R21100062

DevOps Engineer is a specialist role in Decision Science as part of the Technology & Business consulting department to support primary activities in our Application Delivery services. A DevOps Engineer shall work closely with the Solution Architect, Technical Consultant, Security Manager, and Scrum Master (or Project Manager) to support the Agile Development team in designing, planning, delivering, and securing client applications in both on-prem and on-cloud environments.

Responsibilities

• Work closely with an agile build and run team to deliver the application software, using Continuous Integration (CI) and Continuous Deployment (CD) practices and its related toolsets.
• Work closely with the client’s platform/infra engineering team to deliver the infrastructure and operating environment for container-based microservices that meet the agreed high availability, performance, and security requirements.
• Work closely with other internal teams within the organization to ensure that solutions are designed with customer user experience, scale/performance, security and operability in mind.
• Ensure that the software releases are aligned and follow the application release and deployment process for the various projects.
• Facilitate and support the troubleshooting or root cause analysis of platform issues or incidents.
• Proactively identify opportunities for automation, process improvement and architecture simplification for the platforms/services/products.
• In charge of project planning and management activities such as cloud services estimation, delivery schedules, internal enablement, security auditing…
• Work closely with the solution team to gather requirements and prioritizes the requirements for the various teams to deliver
• Research and suggest the latest, most relevant technologies and trends for continuous improvement of the platforms/services/products.

Qualifications and Requirements

• Bachelor’s Degree in Computer Science, Information Technology or other relevant qualifications
• Minimum 6 years of working experience in software delivery for sizable transformational or digitalization projects
• Proficiency in CI/CD tool chains such as Gitlab, Bitbucket, Jenkins, Bamboo, SonarQube, Fortify SCA, Fortify WebInspect, Sonatype Nexus, JFrog Artifactory, and etc.
• Comprehensive experience and knowledge of containerization technologies such as Dockers, Kubernetes (K8s), and et.
• Solid understanding and experience on Terraform and Infrastructure-as-code
• Hands-on experience on AWS/Azure Cloud will be an advantage
• Certifications for AWS/Azure Solutions Architect and DevOps Engineer will be highly considered
• English-speaking with good communication and teamwork skills
• Ability to work within fast-paced agile development environment
• Candidates with extensive experience, excellent communication skills and good certifications will be considered for Senior and Lead positions.

NOTICE

We regret to inform you that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read and agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Consequences of Not Providing Personal Data for Transaction/Service/Application

Please be noted that should you not consent and provide us with the relevant personal data to fulfil the “Purposes” of collection, use and disclosure of your personal data by Decision Science Agency Pte Ltd, it may hinder our ability to continue to interact with you. We may not be able to make a decision on your recruitment and employment or comply with the law and therefore, we may not be able to make an offer of employment.

You may refer to and access our website https://www.decision-science.com/ for more information.

Job Description:

Undertake structural, geotechnical and hydraulic analysis, calculations and prepare design sketches and drawings indicating arrangement and design intent for a variety of building and infrastructure projects.

Conduct engineering assessments, evaluations and presentation relating to existing structures, structural alternatives and/or infrastructure scheme and prepare technical reports documenting the results.

Liaise/co-ordinate with other disciplines/departments in preparation of reports and design packages for multi-disciplines projects.

Communicate with clients, sub consultants, approving agencies, etc. for the purpose of obtaining design information, presenting design alternatives, and expediting approvals.

Job Requirements:

Bachelor or Master Degree in Civil Engineering

Minimum 2 years design experience in structural design of buildings, traffic and canal diversions and infrastructure works

Conversant with Eurocodes and authority submission procedures

Good written and oral communication skills

Responsibilities:

• Manage all soil investigation works, TBM works, Cross passage works, Ground improvement works, as a project geologist.
• Manage various construction works as a civil engineer.
• Responsible for dealing with consultant, authorities, client, and sub-contractors management.
• Planning & Programming
• Planning of execution work schedule based on contract schedule for responsible area.
• Quality
• Highlight technical issues and update Construction Department on changes and distribute to vendors, engineers and supervisors.
• Plan and execute geotechnical and instrumentation installation and monitoring works.
• Site evalution of soil, rock, fault distribution and geological studies on site to determine their engineering properties.
• Liaise and coordinate with instrumentation contractor for installation and monitoring issues.
• Update instrumentation drawings.
• Conduct interpretation of actual soil conditions and test results and oversee all excavation works (shaft, TBM, Cross Passage, GIW,etc)

Requirements:

• Minimum 5 years of geotechnical engineering experience with Degree in civil engineering recognized by the PE Board or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer or recognised Degree in the relevant field subject to the acceptance of the Engineer.
• At least 5 years of experience in the design and construction supervision of geotechnical work for projects of similar scale, complexity and nature of work
• Master degree in geotechnical engineering is preferred
• With LTA project experience is preferred

• Provide IT support operation on daily basis, include below activities:
• IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;
• Support HR on all employee on-board/off-board process including IT training;
• Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);
• IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;
• Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.
• Troubleshoot and configure the firewall, router and switch when issues arises.
• Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;
• Liaise with IT vendor management, include IT hardware/software quotation, costing, Purchase Order process and make proposal if any recommend system tools).
  
• System maintenance work on regular basis, include below activities:
• All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;
• Coordinate department head on storage Clean up include File server, SharePoint and NetApp;
• Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;
• Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;
• Regular update antivirus related tools and window related system patches.
  
• IT governance and direction:
• Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;
• Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);
• Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;
• Assist external or internal auditor on IT compliance or ISO related audit;
• Evaluate vendor proposal and provide justification to management.
  
• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):
• IT project plan, budgeting and proposal;
• IT project deployment after project approved;
• IT project verification and provide necessary training to end user;
• IT project sign off and documentation.
  
• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Job Description

• Planning / assign manpower for the mainentance work and from project handover
• Supervising & managing of sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, trouble-shooting and upgrading/improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA system
• Optimise BMS/Harmonas/PLC/SCADA control system to reduce overall building energy consumption
• Record servicing & maintenance data and generate service report
• Provide technical/operational guidance, engineering solution to the Maintenance Site Facility Management
• Attending customer spot call, develop close relationship & high level service to client

Requirement

• Diploma/Degree in Electrical or Mechatronics Engineering.
• Knowledge on BMS / PLC / HVAC
• Good to have basic programming experience
• PC-literate in MS Word/Excel and AutoCad
• Good interpersonal and Communication skills
• Candidates with no working experience are welcome to apply

We regret only short listed candidate will be notified.

Responsibilities:

• Prepare laboratory analysis, failure analysis reports.
• Conduct engineering failure analysis (FA) and materials-related testing to identify root cause of failures.
• Conduct polymer characterization tests on construction material (sealant, waterproofing membrane, etc.) such as thermal analysis, material type identification, material composition analysis.
• Ensure laboratory instruments and equipment are properly calibrated and maintained to meet relevant quality standards.
• Manage lab operation and supervise a team of five technicians.
• Process owner for ellipsometer, furnaces, auto titration, IRLST and uPCD.
• Implementation of physical testing techniques and standard operating procedures.
• Conduct investigation and report any deviation of lab measurement.
• Monitoring stability of tools and processes by using SPC.
• Document review of FMEA.
• Conduct calibration and GRR of tool.

Requirements

• Min Degree in Chemical/Chemistry/Applied Science Engineering or it's equivalent
• Experience in any Laboratory Equipment from Semicon/Manufacturing Company
• At least 3 years related working experience in semiconductor environment
• Able to work in a team

Interested candidates who wish to apply for the advertised position, please forward your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Inspection Engineer / Plant Inspector

Occupation

Inspection Engineer / Plant Inspector

Job Description & Requirements

Inspection engineer with API 570 /API 510/ API 653 Certificate for the plant in service and shutdown inspection in Singapore. Must have a valid API 570 or API 510 or API 653 Certificate

1. Must have more than 3 years of work experience.

2. Must have previous work experience in plant shutdown inspections. Must have good knowledge of MT,PT,UT,RT Methods.

3. Must have an inspection experience in Exchanger, pressure vessels, Tanks, and Piping. Perform shutdown inspection of pressure vessel, piping including stage, and final inspection.

4. Perform corrosion monitoring inspection and coordination with NDT team

Submit daily and weekly reports to the client on the inspection findings.

1. Must have valid at least any one API certificate. API 510 / API 570 / API 653 Certificate

2. Must have more than 3 years of work experience.

3. Must have previous work experience in plant shutdown

4. Preferably have good knowledge of MT, PT,UT,RT Methods.

5. Must have an inspection experience in Exchanger, pressure vessels, Tanks, and Piping.

Candidates who have work experience in Shell / Exxon Mobil plants are preferable.

Number of Vacancies: 1

Minimum Years of Experience: 3 to 5 years

Minimum Qualification Level: ITE, Diploma, Degree

Field of Study: Any Engineering Discipline

Job Description

• DevOps engineer is responsible for designing, implementing, and maintaining automated CI/CD pipelines, infrastructure as code, and monitoring solutions to streamline software development processes and ensure system reliability, scalability, and security.

• DevOps engineers who possesses DevOps related certifications from CompTIA, EC Council, RedHat, Cloud certification and knowledge (e.g. GCC, AWS) or equivalent would be advantageous.

• Also, CI/CD, Copado DevOps Implementation and Copado DevOps Platform Experience with SHIP/HAT is preferrable.

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in geotechnical and deep excavation works

- Degree in Civil Engineering

- Accredited as a RE with IES

Stand in rate to be discussed during interview.

Job Responsibilities

• Review customer technical drawing and generate cost calculation for sales/marketing department and propose cost reduction for competitive price
• Verify conformance to engineering data and customer drawing specifications through direct liaison with customer
• Maximize production & process efficiency by detailed study of the engineering data specifications while ensuring product quality
• Advice & recommend changes to engineering data and drawings to its specifications when deem necessary to meet production capability
• Receive information from marketing, evaluate the shipment date and budget in order to fufil the customer prerequisite
• Prepare manufacturing process flow, work instruction, detail drawing according to customer requirement and in-house design
• Calculate all materials usage before log in in Glovia system
• Cooperate with designer to ensure all programs and tools are readiness for production loading
• Plan the quantity and schedule the cycle time for prototype sample build
• Work closely with the production team to assist them to respond and solve immediately for any design, planning or tooling error to avoid delay shipment
• Assist design to conduct the new part transfer with process engineers and supervisors to ensure the prototype sample are successful transfer to mass production
• Execute ECN and MCN activities, liaise with affected department to ensure the change is implement and not impact the production schedule
• Update all related documents according to ECN change
• Plan, design and evaluate sequence of operations for fabrication blies from the engineering drawing and specification to final assembly.
• Prepares defined work packages, including detailed instructions, drawings, bills of material, references, inspection requirements, etc.,
• Planning and scheduling quantity and detail cycle time for each order
• Collect prototype yield reports and production feedback to ensure all documents are updated based on
• Customer requirement and within in-house capability
• Researched engineering drawing and component to determine the type of tooling requirement
• Seek of various vendor to purchase assembly tools, such as packing tray, pallet, solder paste stencil, folding jig, and to ensure with minimize price
• Prepare purchase order for all assembly tools
• Follow up closely with vendor to ensure the goods can be delivery on time
• Assist provide prototype shipment monthly shipment report

Job Requirement

• Diploma in Precision/Mechanical Engineering
• Minimum 3 years experience in manufacturing environment
• Good knowledge in manufacturing process and product costing
• Proficient in PC skill such as SAP is an advantage

Job Description:

• Involve in the project or maintenance services related to General Security Systems, Alarms Systems, CCTV Systems, Access control systems and Server & Network infrastructure whenever required
• Perform Installation, Implementation, Configuration and testing of system/storage equipment & setup
• Troubleshoot problems encountered on site
• Develop implementation plan, migration plan and acceptance test plan for the project.
• Conduct acceptance tests with users and address the testing findings/issues
• Work closely with Project/Maintenance Managers in planning the implementation tasks
• Maintain an accurate and consistent set of work instructions service delivery processes.
• Develop As-built documentation for the handover Job
• OT allowance and a company vehicle will be provided

Job Requirements:

• Candidate must possess at least a Professional Certificate/Nitec, Diploma, Advanced/Higher/Graduate Diploma, Engineering (Electrical/Electronic/Information Technology) or equivalent
• Minimum 2 years experience in the Operational Technology/Information Technology industry
• Knowledge of networking and IP/TCP protocol
• In-depth knowledge in CCTV, Access Control and System Servers etc.
• Hands-on experience in security-related tasks such as OS tightening, patching and updating, virus scanning will be an added advantage.
• IT Certification in Windows system & storage, network, database, virtualization and cloud technologies will be an added advantage
• Good communication skills and a positive working attitude.
• Candidate must possess a Class 3 driving license

Clarice Lim (R1656152) | Anchor Search Group Pte Ltd (17C8528)

Job Description:

• Execution of project in accordance with general specifications, particular specifications, technical specifications and drawings, etc.
• Work out bill of materials and engineering deliverables.
• Design and Review Single Line Diagrams and Electrical Schematic Drawings.
• Electrical Equipment Installation and Inspections.
• Attend to Site Activities and Meetings involving clients and contractors.
• Liaison and coordination with all applicable Local Authority Departments to obtain approval on projects.

Job Requirements:

• Candidate must possess at least Diploma in Electrical Engineering.
• Registered Licensed Electrical Worker (LEW) in Singapore
• At least 2 Years of local working experience in the related field is required for this position.
• Possess initiative and capable of multi-tasking in a fast paced environment.

Job Highlights

• Contract Duration: 2 years.
• Nearest MRT Station: Jurong East MRT.
• R&D works on façade inspection technologies.

Responsibilities

• Administer the building regulations on the safety of the façades, including cladding, curtain wall and exterior features eg. windows and air-conditioning units, of buildings.
• Required to carry out site inspections and follow up with building owners to take measures in ensuring the safety of building façades and assess their structural integrity and safety.
• Working closely with the industry to develop new policies, regulations and initiatives to enhance the safety of the building façades.

Requirements

• Singaporean only.
• Knowledge or experience in structural design and analysis of buildings will be advantageous.
• Has good understanding of façade materials behaviors such as glass, aluminium, steel, stone, and knowledge of relevant standards and codes for facades.
• Registered with the Professional Engineers Board Singapore is preffered.

Interested candidates please click “Apply Now”.

We regret to inform that only shortlisted candidates will be informed.

Nicky Yew Soo Ee

Fulfillment Team

BGC Group Pte Ltd

EA: 05C3053

Registration No: R22109448

Roles & Responsibilities

KEY RESPONSIBILTIES:

1. Responsible for the technical aspects of sound recording and reproduction of the audio for a movie, show, or event

2. Improving the sound quality of recorded tracks in post-production

3. Adding special effects and manipulating sounds in post-production

4. Maintaining and setting up sound equipment

5. Enhancing sound quality and volume during live performances

6. Troubleshooting and resolving potential issues during live performances

7. Responsible for maintaining and repairing audio equipment

8. Any other taskings to ensure project success

JOB REQUIREMENT:

1. Degree in audio technology or a related field

2. Experience managing live events and clients

3. Knowledge of physics and engineering to produce high-quality audio performances

4. Advanced knowledge of sound and recording equipment

5. A technical aptitude

Responsibilities

• Design and project management of mechanical/electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc.
• Engineer shall be expected to carry out design work, attendance at consultants’ meetings and management of the relevant M&E aspects of the construction activities.

Requirements

• Bachelor degree holder in mechanical/electrical engineering
• At least 2 years of experience under consultancy culture
• Design and implementation, able to attend meetings independently
• Able to multi-task and work in a fast-paced environment
• Possess initiative, drive, and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite
• Working schedule: 4.5 days
• Mondays to Thursdays (8am-6pm/9am-7pm), Fridays (8am-12pm/9am-1pm)
• Office location: Central

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

The Senior MEP (Mechanical, Electrical and Plumbing) Engineer leads a team of MEP Engineers and coordinate closely with the Project Manager in supervision of all MEP works at Project Site. To ensure works carried out by MEP Engineers in accordance with specifications, drawings and stipulated work programme, quality requirement, standards and MEP construction materials are efficiently utilized.

The Senior MEP Engineer holds the knowhow of MEP part of construction projects, provides the planning input for the MEP works, assist in value engineering and tender preparation for MEP aspect.