Total 21,958 quality assurance engineer job vacancies in Engineering category in Singapore

Responsibilities:

• Senior Process Engineer II (NPI) scope of work includes setting up manufacturing processes, quality control measures, improvement exploration including design of jigs and looking into design for assembly.
• Will need to have a good understanding of existing manufacturing set-up and using techniques such as value stream mapping (VSM), will design the manufacturing concept to optimize available resources. After defining the manufacturing concept, will design the manufacturing processes and incorporating design for assembly (DFA) principles to simplify assembly processes by reducing components or assembly operations required. From these activities, with the objective of optimizing the overall product manufacturing cost.
• Setting up the manufacturing processes and quality control, will create work instructions, testing and/or checklists for inspection for critical to quality measurements. Will define test or measurement parameters and provide requirements to tester design team to develop the testers.
• To improve efficiency and manufacturing practices, the candidate will explore designing jigs for ease of assembly and critical alignments. Alternative tools exploration such as smart tools and fixtures which support better ergonomics will also be considered.
• During the projects before M300, the candidate will be involved in prototype build and support activities of pre-series build. The candidate is a stakeholder in PAG will provide timely feedback via TFS tickets and bringing the discussion to PAG meeting for improvement and resolution. The candidate works closely with stakeholders such as Project manager, Supplier Quality, Quality management, Production and Service. The candidate is also required to review and approve all initiated ECR, and improvement recommendations if necessary. The candidate is required to ensure the successful implementation of ECRs. The candidate supports the project and prepares at critical milestones for readiness check, Q-checks, and evaluation of product/safety risk assessment ensuring on time release of products to market. The candidate will be responsible to set-up the SCM acceptance and delivery criteria ensuring product test and assembly is meeting required specifications.
• Upon M300, the candidate will be the project lead for knowledge transfer between sites. The candidate is responsible to ensure the successful set-up of manufacturing site with scope of tester readiness, technical knowledge, production layout set-up and build capability.
• For the manufacturing engineering team, NPI Process Engineering will be the internal auditor ISO45001 with responsibilities of preparing and representing the team in external audits for recertification

Requirements

• Diploma/Degree of Engineering (relevant field)
• Diploma with min 5-7 years working experience in Manufacturing or automation environment
• Bachelor Degree with 3-5 years working experience in Manufacturing or automation environment
• Ability to interface with the different department and stakeholders

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

• Well Established Company
• Basic $3800 - $4300 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location : Tuas (Transport Provided)
• Working days : Monday to Friday
• Working hours : 8am to 5pm

Job Responsibilities:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• Degree in Chemical Engineering with at least 1 year of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)
EA Recruitment Pte Ltd
EA License No: 21C0492

• MNC Company
• Basic $4500 - $5500 Basic + AWS + VB + Excellent Benefits
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8am to 4.30pm
• Jurong Island. Company Transport provided

Job Responsibilities:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of daily maintenance, transition maintenance, turnaround maintenance and upgrading and improvement related to maintenance
• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.
• Other ad-hoc duties as assigned.

Requirements:

• Bachelor’s Degree in Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Monthly salary $4000 + $6000 + Variable Bonus

• Company located at Woodlands

• Monday – Friday: 8:30am – 5:30pm

• Excellent Welfare & Benefits

• Well Established Industrial Automation Company (MNC)

Job Scope

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology.
• Other duties as assigned.

Requirement

• Degree in Mechanical Engineering / Mechatronics or related disciplines
• 4 - 6 years of relevant experiences in automation equipment design
• Experience in factory automation / electrical, pneumatic, and sensor component selections is an advantage
• Proficient in SolidWorks 3D software

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Position: Gantry Associate Engineer

Workings Days & Hours: 4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am

Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.

Salary: $2700 -$3000

Location: Bedok

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Responsibilities:

• Executing mechanical design at customer site for chemical and slurry system projects
• System project design including P&ID, payout design, piping drawing, equipment internal piping layout
• Responsible for new project in process optimization, operational support, and improvement
• Creation of related documents e.g. HAZOP/FMEA, drawing, SOP, build document OMM
• Execution of on-site installation work, management of subcontractor team.
• Troubleshooting of chemical systems by identifying root cause and suggest improvement plan.
• Implement system functional test with flushing, sampling for system qualification (FAT & SAT).
• Coordinate system modification with Client and Sub-contractors etc.
• Prepare & review drawing for system design document including P&ID/ PFD/Equipment & piping Layout
• Prepare on site check list, installation & commissioning operation procedures, risk assessment;
• Supervise and review the installation work by sub-con and venders
• Provide after-sales support to client for completed projects

Requirements:

• Diploma/Degree in Mechanical/Mechatronics/Chemical engineering field
• Knowledge in process design, project management skills
• Understanding of P&ID, process chart, flow or pressure calculation for chemical & slurry system
• Willing to work overtime when required
• Proficient in MS office, Project, AutoCAD skill
• Experience in design work, project management in semiconductor field is plus

Interested applicants, send in your updated resume by clicking “Apply Now”

Michelle Koh

EA License No.: 23C1894

EA Personnel No.: R1656105

Responsibilities

• Responsible for site activities, coordination and supervision works related to engineering and systems design.
• Coordinate with clients, architects, sub-contractors, and other relevant authorities Plan and ensure M&E works are completed in line with Master Programme and micro-schedule.
• Monitor and ensure all M&E works are carried out in accordance with drawings, specifications and Authority codes. Handle any other ad-hoc duties and tasks assigned.

Requirements

• Degree/Diploma in Mechanical Engineering recognised by Singapore
• Professional Engineers Board (PEB) in Civil Engineering or equivalent with 3 to 5 years of working experience in the construction industry.
• Required Skill(s): Autocad, Microsoft Office

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Plan, manage, execute and close out construction projects (and/ or maintenance construction works) in a safe, timely and sustainable manner including managing nominated subcontractors & vendors;
• Produce long and short term work plan / schedule for assigned task/projects;
• Conduct site investigations and analyse data (reports, tests and drawings);
• Ensure quality of work produced meeting requirements and ensure all pertinent documentations for the job is in order that includes but not limited to method statement & risk assessment, as-built drawings, EQCC, ITP, FIS (field info sheet) compilation of project documents and project closures
• Follow through with job quotations/ BQs, progress claims and issuance /closure of POs for the jobs
• Ensure work carried out safely and comply to all safety requirements
• Handles and resolve technical issues including liaising with subcontractors, vendors, designer and/or consultants
• Coordinate/ communicate with client and own staff (supervisor & logistics supplies) from planning stage till handing over including claims
• Planning of resources for the project (manpower, equipment & materials)
• Progress monitoring and reporting of project status
• Pre-work preparation, e.g. site visit, schedule, MS/RA etc.
• Setting project target and meeting supervisors regularly to share work plan and resource sharing;
• Regular site visit to identify system/ process deficiency and highlight in timely manner
• Recommendation and implementation of operational improvement possibility (including mechanisation, digitalization and other productivity and cost optimisation improvements)
• Carry out technical and feasibility studies that satisfy technical specifications
• Hand over the resulting structures and services for use including follow-up works related to DLP or warranty periods
• Follow through with incident reporting if there are any incidents to their respective sites
• Purchasing of materials that includes raising of MRF and close out of GRN once material received
• Checking on materials delivered to confirm correct materials ordered & delivered
• Attend monthly HSSE Committee meeting and highlight any pertinent issues
• Attend schedule project/ site meetings (internal & external) and highlight any pertinent issues; including producing meeting minutes
• Resolving any unexpected technical difficulties and other problems that may arise.
• Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.
• Taking part of tender preparation process including submission of technical submission, project schedule and any other actions required for the tender submissions

Requirements:

• Possess a Degree in Civil Engineering or equivalent recognized by Singapore PE Board.
• Minimum 3-5 years' of relevant site experience work for civil projects.
• Must be technically inclined and possesses excellent problem-solving.
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams.
• Candidate can start work in short notice is preferred
• Experience in using Microsoft Project/ Primavera or equivalent is preferred

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Job Description

• Position: Assistant Process Engineer (Waste Water Management)
• Well Established Japanese Manufacturing MNC
• Working hours: Monday – Friday (8:00am – 5:00pm)
• Salary (commensurate with experience): Up to $4,000 + AWS + Performance Bonus
• Working Location: Joo Koon
• Island Wide Company Transport Provided
• Outpatient Medical & Dental Insurance Provided
• Duration: Permanent
• Industry: Manufacturing

Main Responsibilities:

• Understand the Quality, Environment, Water Efficiency and Occupational Health & Safety Policy and Objectives including the environmental aspects and impacts, Safety risk assessment, etc.
• Ensure the effectiveness of Quality & Environment Management System across the department and compliance with the legal & regulation.
• Conduct periodic solution analysis and replenishment.
• Support implementing environmental management operations and activities such as Control of chemicals, energy, water and waste. Improve the capacity of production and cost-down projects.
• To review and enhance the safety aspect of the production and inspection area.
• Report any quality, environmental, water efficiency, and safety to the relevant internal authority.
• To liaise with customers regarding production issues/ projects.
• To establish & review periodically the work instructions, process parameters standards (PMP) and FMEA.

Requirements:

• Minimum Diploma in Chemical Engineer or Material Science.
• At least 2 years of relevant experience in electroplating or semiconductor industry.
• Independent and self-driven individual.
• Team player with good interpersonal skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Henry Heng

Consulting Manager

Reg no.: R1982999

EA No: 20C0257

Job Description & Requirements

ob Description & Requirements

This position reports to the Construction Manager / Project Manager

- Plan daily and weekly work for each section and liaise with site foremen, supervisors and workers on the work tasks and construction methods to be used

- Monitor progress of work, quality of workmanship in compliance with site and project requirements and quality records

- Check drawings against transmittal for discrepancies, built-ability information, revisions and coordination issues

- Maintain structural drawings, part prints and shop drawings to ensure they are in order with the register

- Implement project method statements and inspection and test plans

- Monitor site progress, piling progress and initiate setting out verification and update CM and PM on all issues.

- Inspect site progress works to ensure the quality and accuracy of the site works

- Maintain piling records as per inspection and test plan and contract documents

- Check quality and quantity of subcontract works done

Experience / Skill Required

• Minimum 5 years’ of civil engineering experience
• Familiar with design & visualizations software such as AutoCAD / Civil 3D or similar
• Working knowledge of various construction disciplines, cost control, contract administration, scheduling, safety regulations would be an added advantage
• Able to work at Pasir Ris East

Equipment Engineer/ Maintenance Engineer/ Automation Engineer

Job Highlights

• 2 vacancies / 2 Shifts available to choose:

1. Morning Shift: Mon - Fri 7am - 3pm / Sat: 7am -1pm
2. Afternoon Shift: Mon - Fri 3pm - 11pm / Sat: 1pm- 7pm
3. Pls indicate your Shift preference and Current and Expected salary in your CV.

• Permanent Position / MNC
• Location: Near Woodlands Interchange

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Responsible for all automation related activities of the product.
• Responsible for the Maintenance and Repair of production automated machines.
• Optimise automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipments are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues
• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Continuous Improvement to enhance quality and productivity through automated processes
• Train and assess production staff on processes and product where applicable.
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement

Requirements

• Degree/Diploma in Engineering-related discipline, preferably Mechatronics
• 2-5 years related working experience in manufacturing environment
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

Project Engineer (Program Executive/NPI Engineer/ Process Engineer/Manufacturing Engineer/ Mold/Mould)

Permanent Position / MNC

Our client is a global advanced precision engineering & manufacturing solutions provider.

Summary of Role:

• Reporting to Program Manager. Provide project management by liaise with customer on new project requirements and perform process execution as well as coordinate with in-house team

Responsibilities:

• Studies design, customer requirements, specifications and performance standards for new projects.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains and track project schedule by monitoring project progress; coordinating activities among quality, engineering and tooling for mold trial related activities; resolving and troubleshooting process and problems.
• Validate mold trial and assembly outcome required, mold, measurement and process improvement.
• Follow up and provide timely update and submission on project schedule.
• Maintains product and company reputation by complying with relevant regulations.
• Able to create a document like Process Flow, Control Plan, pFMEA, WI and related procedures.
• Authority to initiate and arrange engineering risk build.

Requirements:

• Degree/Diploma in relevant discipline
• 3-5 years’ project management experience in a manufacturing environment
• Knowledge of Plastic Injection Molding, process, project management or related field preferred
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.
• Sound knowledge in SPC, FMEA, DFM, DOE

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

• Oversees construction drawing management and control of construction technical documentations.
• Carry out daily construction site supervision, coordination and quality assurance of all trade implementation on site.
• Ensures works are carried out in accordance with updated drawings, specifications, method of statements, master programme and consultants site instructions.
• Liaises with Clients, Consultants, RE / RTO to carry out site inspection and attend weekly /monthly meeting.
• Manages procurement of all site resources including sub-contractors, suppliers, manpower, materials and machinery .
• Manages and resolve technical issues on construction site, prepare method of statement, shop / working /as-built drawing, project daily / weekly / monthly progress report with progress photographs.
• Manage and resolve technical issues on construction site, prepare method of statement, shop / working /as-built drawing, project daily / weekly / monthly progress report with progress photographs.
• Assists project manager or project director with any other duties

Requirements:

• Have C3 and above driving license.
• Post-graduate / Bachelor’s Degree in Civil / Structural Engineering

• Degree in Engineering
• Equipment Maintenance Exp
• Engineer Level
• Team Lead / Supervisory Skills
• No Exp Are Welcome To Apply - Training Will Be Provided
• Mon - Fri / Office Hour

Job Scope:

• Plan and implement the execution of preventive and corrective programs for the equipment
• Perform troubleshooting, faut diagnosis and failure analysis to determine cause of failure for equipment
• Develop Standard Operating procedures (SOPs) and Work Instructions (WI)
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities
• Establish and maintain proper document system
• Identify, plan and review necessary training needs for the Maintenance Team
• Maintenance reporting
• Perform other duties as assigned

Requirements:

• Possess a Degree in Engineering
• Possess at least 1 year of Equipment Maintenance experience
• No experience are welcome to apply and training will be provided
• Prior supervisory / team lead experience is advantageous
• Ability to relate work with different stakeholders
• Proficiency in MS Office (especially Powerpoint)
• Excellent analytical and problem-solving skills
• Good communication and international skills
• Strong writing and presentation skills

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

Equipment Engineer/ Maintenance Engineer/ Automation Engineer

Job Highlights

• 2 vacancies / 2 Shifts available to choose:

1. Morning Shift: Mon - Fri 7am - 3pm / Sat: 7am -1pm
2. Afternoon Shift: Mon - Fri 3pm - 11pm / Sat: 1pm- 7pm
3. Pls indicate your Shift preference and Current and Expected salary in your CV.

• Permanent Position / MNC
• Location: Near Woodlands Interchange

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities:

• Responsible for all automation related activities of the product.
• Responsible for the Maintenance and Repair of production automated machines.
• Optimise automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipments are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues
• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Continuous Improvement to enhance quality and productivity through automated processes
• Perform internal quality system audit.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement

Requirements

• Degree/Diploma in Engineering-related discipline, preferably Mechatronics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA
• Results-oriented, meticulous and a self-motivated team player

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

• Minimum of 2 years of experience in system configuration, testing, and commissioning for audio-visual solutions.
• Experience with products such as videowalls, LED & LCD displays, digital sound processors (DSP), amplifiers, speakers, and audio-visual switches.
• Familiarity with renowned AV brands like Samsung, Crestron, Extron, BOSE, EV, Poly, Cisco, and Logitech.
• Experience in automation programming with Crestron, Extron, AMX, or Kramer is a plus.
• Knowledge of DSP programming is advantageous

JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.

Project Engineer (Program Executive/NPI Engineer/ Process Engineer/Manufacturing Engineer/ Mold/Mould)

Permanent Position / MNC

Our client is a global advanced precision engineering & manufacturing solutions provider.

Summary of Role:

• Reporting to Program Manager. Provide project management by liaise with customer on new project requirements and perform process execution as well as coordinate with in-house team

Responsibilities:

• Studies design, customer requirements, specifications and performance standards for new projects.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains and track project schedule by monitoring project progress; coordinating activities among quality, engineering and tooling for mold trial related activities; resolving and troubleshooting process and problems.
• Validate mold trial and assembly outcome required, mold, measurement and process improvement.
• Follow up and provide timely update and submission on project schedule.
• Maintains product and company reputation by complying with relevant regulations.
• Able to create a document like Process Flow, Control Plan, pFMEA, WI and related procedures.
• Authority to initiate and arrange engineering risk build.

Requirements:

• Degree/Diploma in relevant discipline
• 3-5 years’ project management experience in a manufacturing environment
• Knowledge of Plastic Injection Molding, process, project management or related field preferred
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA, PPAP, APQP and IOPQ.
• Sound knowledge in SPC, FMEA, DFM, DOE

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Joey

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743 | EA Reg No: R1103523

www.rightrecruit.com.sg

We are looking for Site Engineer to be part of one of the teams in supporting and keeping MINDEF systems up and running smoothly 24/7. The Site Engineer has to be comfortable to be deployed to Sites such as Airbases, Naval Bases or Camps.

Responsibilities:

Perform routine Preventive Maintenance (PM) and Corrective Maintenance (CM) on Communication and Networking Systems

Perform documentation on maintenance tasks

Training is provided

Requirements

• Higher NITEC/ Diploma in Electronics/Information Technology/Telecommunication or related discipline
• Open to standby 24/7 after office hours when needed
• Possess Class 3 Driving License is advantageous

• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.
• Perform internal quality system audit.
• Optimize automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipment's are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues.
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings.
• Perform additional tasks given by the management.

Job Requirements:

• Diploma with 2-3 years of relevant experience.
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA.
• Require to perform shift work (Morning & Afternoon shift).

Interested applicants, please email your resume to [email protected]

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

We are seeking a highly skilled Systems Engineer with cloud experience to design, implement, and maintain cloud infrastructure. The ideal candidate will have extensive experience with cloud platforms, systems architecture, networking, and security. You will play a critical role in ensuring the stability, scalability, and performance of our cloud and on-premises systems, while collaborating with various teams to support business goals.

Key Responsibilities:

• Cloud Infrastructure Design & Management: Design, deploy, and manage cloud environments (AWS, Azure, GCP, etc.), ensuring high availability, scalability, and performance.
• Systems Administration: Configure and maintain both cloud-based and on-premises systems, including servers, storage, and networking equipment.
• Automation & Optimization: Develop and manage automation scripts and tools (e.g., Ansible, Terraform, CloudFormation) to optimize system provisioning, configuration management, and maintenance tasks.
• Monitoring & Troubleshooting: Monitor system performance, ensure availability, and resolve any issues related to cloud and on-prem systems using tools such as CloudWatch, Prometheus, or Nagios.
• Security & Compliance: Implement and maintain security policies, including identity and access management (IAM), encryption, and vulnerability management, ensuring systems comply with industry standards and regulatory requirements.
• Backup & Recovery: Establish and manage backup and disaster recovery plans for cloud and on-prem systems.
• Collaboration & Documentation: Work closely with development, DevOps, and security teams to ensure smooth operation of applications and infrastructure, and maintain detailed system documentation.

Qualifications & Skills:

• 3+ years of experience in systems engineering or cloud infrastructure management.
• Proficiency with cloud platforms such as AWS, Azure, or Google Cloud Platform (GCP).
• Strong experience with automation tools (e.g., Ansible, Terraform, CloudFormation).
• Solid understanding of networking principles (TCP/IP, DNS, VPN, firewall configuration) and cloud networking (VPC, subnets, security groups).
• Familiarity with containerization technologies like Docker and Kubernetes.
• Knowledge of security best practices in cloud environments (e.g., IAM, encryption, security audits).
• Experience with CI/CD tools (Jenkins, GitLab, etc.) and version control (Git).
• Excellent troubleshooting and problem-solving skills.
• Strong communication and teamwork skills.

We are looking for an Asst Engineer / Engineer to be part of one or more teams in supporting and maintaining systems, keep them up and running smoothly 24/7. The Asst Engineer / Engineer should have broad technical skills and a working background in the System-Level Maintenance in the following disciplines, Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS.

Responsibilities:

• Involve in one or more teams in supporting and maintaining systems, keep them up and running smoothly
• Report to the Team Lead/Service Delivery Manager and in fulfilling SLA and KPI in accordance to maintenance contractual agreement.
• Assist Team Lead/Service Delivery Manager to deliver contract obligation within budget.
• Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders.
• To perform routine Preventive Maintenance in accordance with the maintenance instructions / procedures.
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites and/or workshop.
• Liaison with procurement and equipment vendors.
• Perform 24/7 off-site standby for fault activation after office hours.
• Arrange and attend monthly meeting with customers.
• Provide engineering services such as engineering reports, supply support, configuration control and management and obsolescence management.
• Provide solutions to technical problem associate with RF communication systems.
• Required to travel to sites for work

Requirements

• Minimum of Diploma in Electronics/Mechatronics/Computer Engineering or equivalent
• Minimum of 2-3-year experience in a similar engineering-related capacity.
• Positive work ethics and team player.
• Takes ownership of responsibilities.
• Thrive in multi-disciplinary and cross-functional environments
• Able to work effectively in an indoor and outdoor environment.
• Preferably with some knowledge in Data Analytics (e.g. failure trending/patterns)
• Preferably with experience in System-Level Maintenance in the following disciplines is highly preferred (Radio Communications, basic networking skills, computer/servers, embedded systems and/or UPS). Other Engineering-related experience maybe considered.
• Proficient in MS Office (Words, Power-point & Excel)
• Preferably with Class 3 Driving License

Main Duties and Responsibilities

We are seeking experienced and highly technically proficient individuals to join us as Duty Engineers. Joining as part of the Mandai Rainforest Resort by Banyan Tree’s pre-opening team, our Duty Engineers will be responsible for ensuring the smooth operations and maintenance of the Resort’s facilities, including all technical systems.

Key Responsibilities

• The Duty Engineer will conduct regular inspections of the Resort to determine maintenance requirements, upgrades and improvements. In performing this role, the incumbent will be responsible for reporting any incidents to the Assistant Chief Engineer.
• Resolve any maintenance matters reported by guests or staff. This includes coordinating with the Front Office and Housekeeping with regards to specific maintenance activities and ensuring that any identified matters are resolved in an efficient and timely manner.
• Responsible for ensuring that all rules and regulations regarding safe working practices are complied with.
• The Duty Engineer will also conduct the needed preventive maintenance activities when required. This includes liaising with the Assistant Chief Engineer to ensure the necessary inventory, spare parts and other equipment are readily available.

Job Requirements

• Diploma, Higher NITEC, NITEC in Electrical, Mechanical, Plumbing or an equivalent professional certificate.
• Minimum 3 to 5 years’ experience in a similar capacity, preferably in the hospitality industry. Pre-opening experience would be useful.
• Able to work and coordinate with contractors in all work-related activities.
• Able to commit to after office hours duties when required and/or shift work.

• 5-days/week
• Experience in Greenbuild Projects is preferred
• Best remuneration package in the industry

Our client is in the Oil and gas company and has a strong presence globally. They are looking to fill the role of Operations Engineer (Civil & Structural).

JOB RESPONSIBILITIES:

• Plan and oversee maintenance projects to ensure the operational reliability of facilities
• Manage and coordinate procurement processes for engineering activities and equipment.
• Issue purchase orders and work orders, and handle invoice processing for completed tasks.
• Supervise engineering work at retail stations, including both renovations and new site developments.
• Plan and manage engineering activities onsite with contractors, ensuring adherence to HSE regulations.
• Coordinate with government authorities and agencies to obtain necessary engineering approvals.
• Prepare and manage budgets for engineering CAPEX and OPEX.

JOB REQUIREMENTS:

• Bachelor's degree in Civil Engineering or a related discipline.
• At least 5 years of relevant experience in maintenance and repair (M&R).
• Experience with project implementation and M&R EHSS is a plus.
• Ability to excel in a fast-paced, dynamic environment.
• Positive attitude, effective team player, detail-oriented, and meticulous.

OTHER INFORMATION:

• Location: Central
• Working days: 5 Days
• Salary: Up to $6.5K / Negotiable and Bonus (salary will be commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction by providing attractive staff benefits, welfare & training programmes to all staff.

HOW TO APPLY:

If you believe that YOU HAVE WHAT IT TAKES and wants to challenge yourself, we would like to hear from you.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: R1875905)(BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 6590 9958 or 9271 7510 for a confidential discussion. I will be glad to assist you!

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Job description:

• Dealing with routine testing of industrial power supply solutions (AC UPS, Battery
• Charges and Battery) to ensure compliance
• Troubleshooting issues to test for system whether it is working for delivery
• Conducting factory acceptance test with all related stakeholders
• Maintaining, troubleshooting, & repair equipment for end users to ensure smooth operation
• Ensuring good customer relation & providing good support
• Provide verification for factory acceptance test procedure & project operating manual
• Diploma in electrical related course or above
• Good knowledge in uninterruptible power supplies & electrical drawings

Salary up $5000

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293