Total 9,424 reservoir engineer job vacancies in Engineering category in Singapore

Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Job Description:

To plan, coordinate and execute pre-commissioning and commissioning activities, prepare mechanical completion checklists and coordinate with the related activities for entirety of mechanical completion and realization of commissioning.

• Reviews technical specifications, drawings, procurement and contract specifications and other relevant documents.
• Prepares mechanical completion checklists and assign to QA/QC Inspectors for completion.
• Liaises with Commercial Team and Vendor Coordinator for mechanical completion and commissioning supports from vendors and sub-contractors
• Monitors progress of mechanical completion for system readiness and assist mechanical completion work when necessary.
• Assist QA/QC Inspectors material verification check and incoming good receive when necessary.
• Liaises with Design Engineers for clarity of commissioning work scope.
• Under study system design and plan for commissioning.
• Assignment of System / Sub System Boundaries and checksheets for mechanical completion activities to facilitate site commissioning activities.
• Liaises with Design Engineers and vendors to develop commissioning procedures and submit for owner's approval.
• Liaises with owner, certifying authority, production and engineering departments on implementation and execution of commissioning procedures.
• Takes lead in commissioning preparation and work within discipline and support system commissioning of other disciplines.
• Provide commissioning assistance for vendors.
• Attend factory inspection, factory acceptance test and other related testing or compliance activities.
• Consolidates commissioning tests data and result for handover to owner.
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensure that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed.
• Ensure that all Commissioning Permit To Work Procedure (CPTW) are followed.
• Any other associated tasks and responsibilities assigned from time to time.

Requirements:

• Degree in Mechanical, Marine and Naval Architecture Engineering with 5 years' experience in marine industry. Or diploma in Mechanical, Marine and Naval Architecture industry with at least 8 years' experience in marine industry.
• At least 5-8 years' experience in marine industry and familiar with various classification codes, regulations and be familiar with Mechanical Completion and Commissioning Procedures
• Be familiar with codes and standards such as IMO, ANSI/ASME/API, Norsok Class codes. Technical knowledge for working on mechanical/piping installation. Be familiar with marine piping system, mechanical structure and their operating principle. Practical experience on marine systems start-up and troubleshooting.
• Need to know about specifications, classification standards and computer literate. Able to utilize measuring instruments and understand measuring requirement and practice. Understand precedence and interfaces of vessel system.
• Be prepared to work on weekends, night shifts and go for sea trials, factory acceptance test and factory inspection.
• Initiative, analytical, responsible, leadership, spontaneous, good communication skills and result oriented.
• Must be physically fit.

Highlight:

• Permanent job opportunity
• 5 days work week, normal office working hour
• Great remuneration & benefits
• Great career progression
• Location: East / Central

Responsibilities:

• Install, configure, and manage end-user laptops, desktops, printers, and mobile devices.
• Handle onboarding and offboarding processes, ensuring security and policy compliance.
• Contribute to technical documentation and help improve internal processes.
• Provide day-to-day technical support to end users and ensure the smooth running of computers, network devices and printers.
• Troubleshoot and resolve end user application issues, maintain and update technical support documentation.
• Handle asset management, maintain inventory and liaise with vendors.

Requirements:

• 2 - 5 years of IT Technical, end-user support working experience.
• Experience in creating user's account and mailboxes on AD and Exchange.
• Good knowledge on antivirus management e.g. Windows Defender, Symantec, McAfee
• Good knowledge on repair PCs and notebooks such as O/S and Office Application troubleshooting.
• Good knowledge in diagnostic of hardware issues on PCs and notebooks.
• Knowledge in vendor management such like negotiation of pricing, vendor quotation, etc.
• Able to work independently as well as in a group.
• Good organization, communication and interpersonal skills.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: November 2024

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Position Overview:

As a Sr. Staff signal integrity engineer, you will be working on challenging SI and PI tasks in globally distributed teams. You will be supporting SI/PI signoff of chip design, package design and PCB design in order to support successful delivery of products of various product lines to market. You will be working with design, test, P&R and application teams globally for modeling of chip high speed I/O and power rails. You will be supporting customers in signing off hardware design or resolving SI/PI issues where system design has constraints. You will also be involved in defining specifications of product electrical performance. You may also be involved in modeling and simulation of EMC issues.

Responsibilities:

Primary (70%):

1. Responsible for SI/PI signoff of chip design, package design and PCB design.

2. Responsible for modeling high speed I/O and PDN.

3. Responsible for customer support for PCB design signoff and issue debug.

Secondary (30%):

1. Responsible for product electrical specifications related to high speed I/O.

2. Responsible for modeling and simulation of EMC issues.

Requirements:

Experience/Skills:

1. 10+ year working experience in SI/PI

2. Deep understanding in electromagnetic theory, transmission line theory and microwave theory

3. Familiar with SI/PI design flow, time domain and frequency domain modeling and simulation

4. Good comprehension of PLL, equalization, CDR, jitter, noise, IBIS modeling, 8b10b encoding

5. Hands on with lab equipment including high speed oscilloscope, spectrum analyzer and network analyzer

6. Skilled with SI/PI simulation tools from ANSYS, Cadence, Keysight and others.

7. Skilled in data processing with script in Python, Matlab or other language.

8. Experience in MIPI D-PHY, C-PHY and PAM-4 is a plus.

9. Good communication skills and team work.

10. Education: MS/PhD

Responsibilities:

• Manage VMware and Vcenter environments
• Configure and manage Meraki switches/access points and Fortigate firewalls
• Maintain Windows servers and work with MS-SQL and IIS servers to support vendor development projects and generate queries for reports
• Maintain Windows workstations and laptops
• Oversee backup and recovery processes, and implement disaster recovery plans
• Collaborate with HQ to ensure compliance with IT standards, including updating ISO documentation as needed

Requirements:

• Must have at least a Diploma or Degree in Computer Science, Information Technology, or a related field
• 2 years of experience in IT infrastructure management
• Proficient in managing Windows servers and workstations
• Experience with VMware and Vcenter
• Familiarity with Meraki and Fortigate products
• Skilled in SQL and IIS server management
• Experience in installing and configuring Office 365

To apply, please visit www.gmprecruit.com and search for Job Reference: 24920

To learn more about this opportunity, please contact Yingying at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lai Yingying | Registration No: R1110239

Senior/Process Engineer (Wastewater treatment)

Our client is a leading environmental solutions firm with strong expertise in EPCC, O&M and design & build. In line with their growth and expansion, they’re now looking for a Senior/Process Engineer to join their dynamic organization during an exciting time in their development.

Job Responsibilities

• Be responsible for designing, implementing, and optimizing wastewater treatment processes and systems
• Coordinate with cross-functional teams, including design, construction, and commissioning, to ensure seamless project execution.
• Prepare technical specifications for treatment plant
• Provide engineering support for tender activities, bids and proposals, and prepare testing and commissioning plans
• Manage contractors and suppliers, ensuring adherence to technical specifications and safety regulations
• Lead continuous improvement initiatives to enhance the reliability and effectiveness of wastewater systems.
• Ensure that treatment plants comply with regulatory standards and operate efficiently

Requirements

• Minimum degree in Chemical Engineering, Environmental Engineering or related field
• Possess experience with minimum 5 wastewater treatment projects

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Job Description

• Review the BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Supervise and coordinate site installation works by contractors
• Attend site coordinate meetings with main-con, consultants and contractor
• Lead daily briefing and execute the project activities and oversee implementation of the quality plan
• Coordinate installation activities, site safety, order, arrange and receive M&E major equipment delivery for contractors’ installation
• Provide site progress update bi-weekly and monthly
• Arrange and attend material, equipment, installation, and testing inspection
• Carry out testing and commissioning and handover of completed work activities to respective authorities or clients to in timely manner and delivery with desired quality standards and safety aspects
• Maintain all quality and safety records, and other duties as assigned

Requirements

• Diploma or Degree in Building Service / Mechanical Engineering/Engineering
• Fresh Graduates are welcomed to apply
• Strong project management skills
• Excellent analytical, critical thinking, problem-solving ailities
• Proactive and willing to take on new challenges
• Creative, adaptable, and innovative in approach
• Strong interpersonal, communication, and leadership skills
• A collaborative team player with positive attitude

Job Description:

• Leads for Mechanical completion activities
• Inducts safe work practice and procedure
• Assigns tasks and manage the Mechanical completion team
• Organizes and coordinate FAT’s, EFAT with the vendors
• Coordinates and liaise with other discipline to expedite system handover and prioritize construction sequence
• Reviews and monitor Inspections and systems handover and make the job compliant to project specification
• Develops quantifiable benchmarks and everyone knows when the goal shall be achieved or completed (e.g. KPI)
• Demonstrates leadership in managing the subcontractor and immediate supervisor.
• Plans and control of day to day activities,coordinating with the subcontractor and discuss on the outstanding activities during the weekly progress meetings and arranging materials for the subcontractor to move with the job
• Bridges between the Commissioning team and Fabrication team and ensure the system handover is done as per commissioning requirements
• Coordinates with team members in the preparation of the Risk assessments / Method statement for the activities
• Communicates effectively regards of project expectations to team members
• Identifies and resolve issues and conflicts within the project team
• Manages preservation activities ,changes in project scope, identify potential crisis and devise contingency plans

Requirements:

• Bachelor’s degree in Engineering
• Minimum 10 years relevant experience in similar industry
• Proficient in MS office
• Able to work from heights and/or confined spaces

Position Overview

Be responsible to research and develop innovative computer vision/deep learning algorithms for image applications.

Responsibilities

1. Research, develop and optimize computer vision/deep learning algorithms for image applications, such as, object recognition, face recognition, video analytics, image quality enhancement, and 3D reconstruction.

2. Explore, design and implement new algorithms/features according to marketing requirements.

3. Algorithm testing and verification.

4. Algorithm integration in system architecture.

Requirements

1. Ph.D. or MS with equivalent practical experience in Computer Science or Electrical Engineering or related disciplines such as Applied Mathematics/Statistics.

2. Broad knowledge in various computer vision related topics such as deep learning, object recognition (detection, classification, segmentation) and tracking, stereo, and/or 3D reconstruction; candidate with image sensor knowledge is a plus.

3. Strong knowledge and extensive hands-on experience of independent algorithm research; candidate with strong mathematics background is a plus.

4. Excellent C/C++ programming skills, proficient with scripting languages (e.g. Python or Matlab), and extensive experience with OpenCV.

5. Excellent verbal and written communication skills.

PC Deployment and Configuration

• Install, configure, and deploy personal computers and related peripherals, including desktops, laptops, monitors, and printers.
• Ensure that all PCs are set up according to company standards, including operating systems, software applications, and security protocols.
• Perform hardware and software upgrades as needed.

Troubleshooting and Technical Support:

• Provide technical support to end-users for PC-related issues, including hardware and software problems.
• Escalate complex problems to the appropriate IT teams when necessary.

Maintenance and Upkeep:

• Conduct routine maintenance on PCs to ensure optimal performance and security.
• Perform system updates, patches, and antivirus scans.
• Manage inventory of PC hardware and software licenses.

Documentation:

• Maintain accurate records of PC configurations, repairs, and maintenance activities.
• Updates of support tickets and resolutions details on job completion.

Job Requirements:

• Nitec / Diploma in IT, Computer Engineering, Electrical Electronics or relevant
• Welcome entry level (Training provided from basic)
• 5 days work (Monday to Friday)
• Islandwide work locations (Mostly in the East & Central areas)
• Salary $2300 - $2800
• Start work immediately or within short notice

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Primary Objectives of Position

• Manage the overall supervision of maintenance activities in depot and workshop
• Responsible for the availability of passenger trains, engineering train vehicles, light rail vehicles and workshop overhaul or plant equipment for mainline operation.
• Manage the budget expenditure of the section
• Ensure all defects on vehicles/equipment are rectified in a safe and responsive way.
• Provide an effective technical support service to all other Rolling Stock sections, including development and control of an overall maintenance plan, provision of Work Instructions, procedures and technical documentation and provision of regular performance information.
• Ensure that Rolling Stock staff and contractors within their sections are adequately trained and competent to perform their tasks safely and proficiently in the railway environment.
• Overall-in-charge of managing corrective and preventive maintenance of NEL/SPLRT passenger trains, engineering trains, light rail vehicles, or depot plant equipment.
• Overall-in-charge for all engineering projects in NEL/SPLRT Rolling Stock.

Major Responsibilities

• The day-to-day management of staff in their section.
• Ensuring individual roles, functions and responsibilities are clearly defined and communicated.
• Managing section budget resources to maximize maintenance outcomes and improve customer satisfaction.
• Providing advice and support to the HOD and Executive management as required.
• Identifying areas for improvement through training and development programs
• Ensure all staff are adequately trained and competent.
• Manage, lead, and motivate the section to achieve reliability, quality, cost and availability targets to meet customer needs.
• Maintain the performance of all vehicles and depot equipment.
• Perform and standby for company and department duty schedule such as PST, EIC, AEIC or Rerailment duty

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

• Ensure all work related to the section are undertaken in a safe way during all maintenance activities in Sengkang Depot.
• Undertake Monthly Safety Observations of all areas under the purview of Rolling Stock and ensure that controls are in place to achieve safety.

Job Specifications

Minimum Education / Qualifications

• Degree or Diploma in Engineering from a recognized university or polytechnic.

Minimum Years of Relevant Experience

• Preferably with 3 years of relevant experience in Railway Engineering/Maintenance or equivalent

Knowledge/Skills

• Strong Communication, Writing, Analytical and Problem solving skills
• Knowledge of Training and Development, preferably with full ACTA qualification
• Conversant in MS Office software (Word, Excel, PowerPoint)

Attributes

• Highly motivated and resourceful team player
• Strong interpersonal and communication skills
• Strong planning and organization skills
• Analytical and meticulous

Job Description:

To plan, coordinate and execute pre-commissioning and commissioning activities, prepare mechanical completion checklists and coordinate with the related activities for entirety of mechanical completion and realization of commissioning.

• Reviews technical specifications, drawings, procurement and contract specifications and other relevant documents.
• Prepares mechanical completion checklists and assign to QA/QC Inspectors for completion.
• Liaises with Commercial Team and Vendor Coordinator for mechanical completion and commissioning supports from vendors and sub-contractors.
• Monitors progress of mechanical completion for system readiness and assist mechanical completion work when necessary.
• Assist QA/QC Inspectors material verification check and incoming good receive when necessary.
• Liaises with Design Engineers for clarity of commissioning work scope.
• Assignment of System / Sub System Boundaries and check sheets for mechanical completion activities to facilitate site commissioning activities.
• Under study system design and plan for commissioning.
• Develop Instrument Loop folders and submit for owner's approval for site execution.
• Liaises with Design Engineers and vendors to develop commissioning procedures and submit for owner's approval.
• Liaises with owner, certifying authority, production and engineering departments on implementation and execution of commissioning procedures.
• Takes lead in commissioning preparation and work within discipline and support system commissioning of other disciplines.
• Provide commissioning assistance for vendors.
• Attend factory inspection, factory acceptance test and other related testing or compliance activities.
• Consolidates commissioning tests data and result for handover to owner.
• Ensure the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensure that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.
• Participate in the preparation of Safe work, Environmental control and Emergency procedures.
• Ensure that all Health, Safety, Environmental & Quality (HSEQ) plans are followed.
• Ensure that all Commissioning Permit To Work Procedure (CPTW) are followed.
• Any other associated tasks and responsibilities assigned from time to time.
• Need to know about specifications, classification standards and computer literate. Able to utilize measuring instruments and understand measuring requirement and practice. Understand precedence and interfaces of vessel system.

Requirements:

• Degree in Electrical/Instrumentation/Process/Electronics Engineering with 5 years' experience in marine industry or Diploma in Electrical/Instrumentation/Process/Electronics Engineering with 8 years' experience.
• At least 5 to 8 years' experience in marine industry and familiar with various classifications codes, Norsok, IEC specification etc and be familiar with Mechanical Completion and Commissioning Procedures.
• Be prepared to work on weekends, night shifts and go for sea trials, factory acceptance test and factory inspection.
• Technical knowledge for working on low and high voltage apparatus, electrical
• Installation/distribution/generation system, electrical system safety/code and regulations such as NMD, Lloyds, IEC etc. Practical experience on marine systems start-up and troubleshooting
• Technical knowledge for FGS / ICSS / DCS / PLC systems, Cause and Effects (C&E) and field instrumentation.
• Practical experience on marine systems start-up and troubleshooting
• Initiative, analytical, responsible, leadership, spontaneous, good communication skills and result oriented.
• Must be physically fit.

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Proposal Engineer
Working day: Monday - Friday (8am - 5.45pm)
Salary: $3,000 - $6,000
Office Location: Woodlands

Duties & Responsibilities:

Cost Estimation:

• Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
• Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off

• Perform quantity take-offs for materials and labour required for MEP installations;
• Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control

• Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
• Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement

• Assist in the preparation of tender documents and participate in the procurement process;
• Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration

• Administer and manage contracts related to MEP works, including variations and claims;
• Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering

• Identify opportunities for value engineering to optimize project costs without compromising quality;
• Work closely with design and construction teams to implement value engineering recommendations;

Risk Management

• Identify and assess potential risks related to cost and contract issues;
• Develop strategies to mitigate risks and ensure project success;

Cost Reporting

• Generate regular cost reports to keep stakeholders informed of project financial status;
• Provide analysis and recommendations based on cost reporting data;

Collaboration

• Collaborate with architects, engineers, contractors, and other project stakeholders;
• Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance

• Ensure compliance with relevant regulations and standards in MEP construction;
• Stay updated on industry trends, codes, and best practices;

Ad-Hoc

• Undertake cost analysis for repair and maintenance project work;
• Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:

• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.
• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.
• Good working knowledge in Mechanical and Electrical.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Highlight:

• Japan MNC
• Permanent job opportunity
• 5 days work week, normal office working hour
• Great remuneration & benefits
• Great career progression
• Location: Jurong Island (Company transport pickup @ Jurong East)

Responsibilities

• Responding to and resolving Customer and internal stakeholder technical requests concerning relevant operation and maintenance matters of the GTCC Power Plant, making use of product technical knowledge, mechanical know-how of system components, and analytical skills while adhering to sound engineering principles, standards, practices and procedures.
• Communicating with and supporting the Customer to act on Technical Information notices to improve or upgrade the plant.
• Proactively identifying potential failures, assessing and controlling operational risks on the Power Train with support from the 24/7 remote monitoring hub and expert support
• Proactively advising and assisting the Customer in planning, coordination with MPW for the execution of relevant inspection and maintenance activities.
• Analyzing, tracking and reporting monthly Reliability, Availability, and Maintainability (RAM) data and relevant KPIs for the LTSA, for the purposes of invoicing and for monitoring performance against the contractual guarantees and obligations. If necessary, recommend corrective actions.
• Reviewing and presenting the monthly monitoring diagnostic reports to the Customer.
• Reviewing and presenting the inspection findings and outage reports to the Customer.

Requirements:

• Previous site work experience in Long Term Service Agreements, plant commissioning, field service, and/or maintenance and overhaul of GTCC power plants or industrial plants rotating equipment is preferable.
• Previous customer facing experience where there is regular interaction with plant personnel to provide troubleshooting support and to resolve problems.
• Technical knowledge in GTCC operations and maintenance.

HOW TO APPLY:

Interested applicants, please send your latest resume to [email protected] or click on “Apply Now” and provide the below details in your resume.

• Last drawn salary
• Expected salary
• Notice period
• Reason of leaving

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Dick Sern (Dick Sern)

EA Personnel Reg No: R22106832

Our client is a manufacturer of machines that offers automated solutions for the pharmaceutical industry and healthcare facilities.

• Responsible for the design of controls system and programming coding.
• Modify controls design and other documents according to the company standards and compliance to industry standards.
• Develop specific program as per project requirements based on company coding standard.
• Support in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.

Requirements:

• Diploma in any relevant engineering discipline
• At least 5 years of PLC experience in using Allen Bradley and Siemens-S7 programming.
• Good communication and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

About the job:

• Perform troubleshooting for client platform related problems.
• Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Perform service request related to client platforms.
• Monitor the agreed service level, document & maintain the configuration of the systems; provide regular reporting to relevant parties.
• Involve in client platform implementation/upgrade project.
• Manage client platform implementation/upgrade project.
• Perform on research/evaluation of client platform tools.
• Provide systems related technical advice to customers or project team.
• Manage client platform management systems.
• Manage systems changes through change request process & provide status reports to the relevant parties.
• Perform client platform related presales tasks.
• Gather business &/or application requirements on the infrastructure to perform the infrastructure requirement analysis & design.
• Ensure service level meet requirement. Propose and implement action plan when required.
• Established facility management standards/best practices to ensure operation consistency across project/facility management teams.

About you:

• At least Diploma in relevant to IT
• Knowledge in troubleshoot Window 10
• Minimum 1 year of experience in WOG project.

There’s nothing more exciting than being at the center of a rapidly growing field in technology and applying your skillsets to drive innovation and modernize the world's most complex and mission-critical systems.

As a Site Reliability Engineer III at JPMorgan Chase within the Corporate Technology, Trade Surveillance, you will solve complex and broad business problems with simple and straightforward solutions. Through code and cloud infrastructure, you will configure, maintain, monitor, and optimize applications and their associated infrastructure to independently decompose and iteratively improve on existing solutions. You are a significant contributor to your team by sharing your knowledge of end-to-end operations, availability, reliability, and scalability of your application or platform.

Job responsibilities

• Guides and assists others in the areas of building appropriate level designs and gaining consensus from peers where appropriate

• Collaborates with other software engineers and teams to design and implement deployment approaches using automated continuous integration and continuous delivery pipelines

• Collaborates with other software engineers and teams to design, develop, test, and implement availability, reliability, scalability, and solutions in their applications

• Implements infrastructure, configuration, and network as code for the applications and platforms in your remit

• Collaborates with technical experts, key stakeholders, and team members to resolve complex problems

• Understands service level indicators and utilizes service level objectives to proactively resolve issues before they impact customers

• Supports the adoption of site reliability engineering best practices within your team

Required qualifications, capabilities, and skills

• Bachelor’s Degree in Computer Science, Engineering, Mathematics or other related disciplines

• 3+ years or equivalent expertise in site reliability engineering

• Proficient in site reliability culture and principles and familiarity with how to implement site reliability within an application or platform

• Proficient in at least one programming language such as Python, Java/Spring Boot, and .Net

• Proficient knowledge of software applications and technical processes within a given technical discipline (e.g., Cloud, artificial intelligence, Android, etc.)

• Experience in observability such as white and black box monitoring, service level objective alerting, and telemetry collection using tools such as Grafana, Dynatrace, Prometheus, Datadog, Splunk, and others

• Experience with continuous integration and continuous delivery tools like Jenkins, GitLab, or Terraform

• Familiarity with container and container orchestration such as ECS, Kubernetes, and Docker

• Ability to identify new technologies and relevant solutions to ensure design constraints are met by the software team

• Ability to initiate and implement ideas to solve business problems

To apply for this position, please use the following URL:

https://ars2.equest.com/?response_id=fc93f9317fec3db0b109f54bf05b37b7

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

• Shall perform the following administration activities for storage and automate them to the extent possible:
• Storage Area Network
• Provide Installation, administration and maintenance support for Storage Area Network and Enterprise Backup.
• Health check and monitoring of the storage devices.
• Integrate the storage solution’s hardware and software into the customer’s operating environment and ensure full interoperability.
• Regularly update the firmware.
• Ensure comprehensive documentation of the storage solution is in place.
• Prepare test plan in consultation with the customer to ensure the solution can function fully.
• Enterprise Backup Administration and management of Symantec or Commvault backup environment.
• Backup job configuration and scheduling.
• Backup server performance tuning.
• Troubleshoot any backup related.
• Capacity planning for tape libraries and backup servers.
• Perform Disaster Recovery (DR) for all the critical systems and ensure successful rebuild of Production or DR servers after each DR should the need arise.
• Identify potential changes and system improvements for consideration and implementation (continuous improvements)
• Create, maintain and distribute reports of progress to Technical Operations Manager.
• Any other ad-hoc tasks assigned.
• Minimum requirements the resource(s) personnel assigned must be a certified Storage (SAN) and/or Backup Administrator in administration and troubleshooting.
• He/she is/are expected to cover level 1 and level 2 storage related problems and must be an experienced administrator in the following technologies:
• Good knowledge of EMC, Hitachi, and Huawei storage systems

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is a distributor of automotive and industrial solutions.

• Manage and configure network devices such as firewalls, routers, VPNs, internet proxies, and wireless networks.
• Optimize enterprise networking, including WAN, LAN, and VPN implementations and support.
• Monitor system performance and troubleshoot issues to ensure optimal performance and reliability.

Requirements:

• CCNA certified
• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of experience in Infrastructure Engineering.
• Good knowledge with internet architecture designs (TCP/IP, DNS, DHCP, Proxy and Firewall).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)