Selected Candidates to carry out, or supervise, inspections, maintenance, testing and checks according to the rules and procedures in order to release the aircraft to service.

Key Responsibilities

• Inspections

To carry out or supervise technical handling of an aircraft, within the scheduled ground time, according current carriers instructions

Activities:

1. Performs the checklist according to the aircraft type and carriers instructions
2. Inspects the performed duties
3. Signs the required logbook ( e.g. AML/CML + BOW) for maintenance release

• Analying defects and complaints

Activities:

1. Checks pre-arrival information on aircraft status, from crew and/or Maintenance Control Center
2. Contact flight crew directly after arrival for debriefing
3. Checks logbooks for open items
4. Analyses defects and complaints (trouble shooting)
5. Decides if defects and complaints can be deferred or rectified immediately
6. Informs and consults home base and Maintenance Manager or duty Engineer/Service Manager/Operations/Crew upon actions to be taken

• Repair, technical handling and modifications

To carry out or supervise maintenance and repairs of the aircraft

Activities:

1. Ensures availability of work instructions (checklist)
2. Ensures correct and adequate stock control (spare parts and materials) and maintenance of ground equipment (if applicable), in accordance with company procedures
3. Plans and organises the repair process and deploys Mechanics
4. Performs or supervises repairs and technical handling
5. Communicates with home base and Service Manager/Operations/Crew about the progress of the repair or the modification process.
6. Inspects the repairs and modifications
7. Perform flight duties or relief duties to other station when required

• Administration

Activities:

1. Performs all administration related to the technical handling of the carrier, according to instructions by the carrier
2. Updates Station Information File
3. Carry out station related tasks assigned by Maintenance Manager.

• Supervision of Mechanics

Activities:

1. Checks if duties are performed under safe conditions
2. Trains Mechanics

• Knowledge and Experience

1. Is holding of EASA B1 or B1/2 AML
2. Is certifying staff according to EASA 66 Cat. B1 or B1/2
3. Possess either or multiple ratings of A320,A330,A350,B777,B744,B787
4. Preferably has at least 2 years of experience as a certifying engineer
5. Reads, writes and speaks English
6. Has sufficient knowledge about specific operator- and type- procedures including customer demands
7. Has the proven ability to quickly and accurately identify more complex issues and problems that require thorough analysis
8. Is able to envisage the broader consequences of various decisions
9. Is able to arrive at a sound judgement in the face of conflicting facts and ambiguous information

• Behavioural Competencies

1. Concern for Excellence
2. Customer Service Orientation
3. Drive
4. Integrity
5. Judgement
6. Self Confidence

Job Description

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join our Applied Materials - NUS Advanced Materials Corporate Lab. The Advanced Materials Corporate Lab combines Applied's leading expertise in materials engineering and semiconductor technologies with NUS' world-class and multi-disciplinary R&D capabilities that span across applied chemistry, materials science and microelectronics process engineering. Apply now if you fit the description below!

​Key Responsibilities

• Devise precursor and deposition strategies and associated intellectual property. Design chemical processes to find new innovative ways to create, remove or clean thin films.
• Prepare the project plan for semiconductor films growth and execute project deliverables from planning to implementation. Be responsible for project milestones and deliverables within project cost.
• Engage with business unit teams and customers to initiate and complete projects. Own the technical development aspects in the pursuit of the project goals.
• Trouble shoot for root causes to project developments obstacles and engage business unit and broader team members implementing proposed solutions to the problems.
• Prioritize the activities to achieve on-time and within budget performance objectives for the project.

Requirements

• PhD in Chemistry, Chemical Engineering and Materials Science
• Have good working experience in ALD, CVD, MOCVD, PECVD film depositions
• Have working experience with novel thin film growth and characterizations
• Have good understanding of vacuum science and general process and hardware trouble shooting of ALD/CVD platforms
• Have basic working knowledge of chemistry and chemical reactions at interfaces

Work Location

• Applied Materials - NUS Advanced Materials Corporate Lab @E6

For Sewage and Drainage Pipe Jacking Project

1. work in SG, Indonesia, HK;

2.5years above site supervision and overall management experiences ;

3. Able to plan, design concept, organize resources for these projects.

4. Able to add value for the projects through design concept, machine selection, manpower allocation, good schedule and planning.

Our company is in need of Mechanical Engineer cum Procurement Officer for construction industry.

Criterias are:
1. Healthy
2. In-charge of workshop vehicle maintenance and repairs
3. Warehouse duties
4. Preparation of Delivery Orders (DO), Invoices and Quotations

Working Hours:

Mon-Sat: 8am to 6pm

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

· Responsible in providing day-to-day engineering support to manufacturing operations to achieve key business objectives involving quality and productivity.

· Provide support for engineering conception phase all the way to implementation and operations support.

· Work closely with cross functional teams to provide innovative engineering solutions for continue process improvements.

· Active involvement in projects relating to design and implementation of manufacturing-related equipment, such as automated optical inspection units.

· Assist in developing, updating and revising manufacturing documentation in accordance with company policies, relevant standards, and regulations established by regulated agencies (e.g. ISO9001/14001/13485).

· Assist in initiating, evaluating and implementing engineering change order.

· Assist in anyalzing and determining conformance of materials and parts manufactured.

· Assist in monitoring and improving productivity metrics established as company’s goal.

· Participate in development and validation activities for R&D products.

Knowledge in Delta PLC programming and COBOT.

Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service manufacturing equipment for the semiconductor and display industries. Our innovations are at the foundation of the technology that transforms every part of our lives. We offer an exciting place to grow and learn alongside some of the best people you’ll ever meet. Join us to Make Possible a Better Future.

The Advanced Packaging Development Center (APDC) is a state-of-the-art cleanroom that is among the most advanced wafer-level packaging labs in the world. It houses the industry’s broadest portfolio of products that enable the foundational building blocks of heterogeneous integration, including advanced bump and micro-bump, fine-line redistribution layer (RDL), TSV and hybrid bonding. APDC was established as a joint lab partnership with the Institute of Microelectronics (IME), a research institute of Singapore’s Agency for Science, Technology and Research (A*STAR).

We are currently seeking for an experienced and passionate Process Engineer (R&D) to join APDC now. Apply now if you fit the description below!

Key Responsibilities

• Work closely with Process Integration, and the CTO USA team, hands on running wafers on semiconductor equipment using MES systems to run process operations.
• Design, create recipes, collect data, analyze and compile reports on moderately difficult process engineering experiments, within safety guidelines
• Perform hardware characterization on moderately difficult systems, within safety guidelines
• Troubleshoot moderately complex problems, perform Root Cause Analysis and resolve moderately difficult process engineering issues
• Measure film properties, organize data/reports for review and interpret data
• Generate internal documentation for products, presentations and technical reports
• Interact with customers to resolve moderately difficult process engineering issues/problems under general supervision
• Identify, select and work with vendors and suppliers under general supervision
• Implement new technology, products and analytical instrumentation

Requirements

• Relevant Engineering education qualification
• Research experiences focusing in semiconductor industry
• Past experiences in dealing with MES systems is a plus
• Stakeholder management
• Good communication and interpersonal skills

Work Location

• Science Park II

1. Candidates with project experience in commercial office fit-outs are highly desirable.
2. A minimum of 3 years of relevant work experience is required.
3. Fluent in English, both spoken and written is essential.
4. Basic understanding of the design and calculation of HVAC systems is necessary.
5. Assisting with tender calculations, preparing presentation materials for tenders, and participating in tender interviews.
6. Must be a team player, capable of effectively collaborating and communicating with clients, suppliers, contractors, and team members throughout the project.
7. Monitor project costing and progress payment, variation works and cost control.
8. Proficiency in troubleshooting and resolving technical issues that arise during projects is required.
9. Candidates should be able to manage multiple projects simultaneously and perform well under pressure

About the Role

Seamap Pte Ltd, a leading engineering company in the East Region, is seeking a skilled and motivated Mechanical Engineer to join our dynamic team. In this role, you will contribute to the design, development, and maintenance of cutting-edge engineering solutions that power our innovative projects. As a full-time position, this opportunity provides significant room for professional growth and development.

What You'll Be Doing

• Support the mechanical engineering aspects of all technical department activities.
• Design mechanical components and prepare technical drawings, specifications, and BOMs for new and existing products.
• Assist in vendor sourcing for fabrication of mechanical parts, ensuring quality and cost-effectiveness.
• Collaborate closely with vendors during the fabrication process to ensure adherence to design specifications, conducting quality checks upon delivery.
• Provide mechanical engineering support to other departments (e.g., Production, Repairs) to address customer queries, product issues, and returns.
• Ensure compliance with all relevant roles and responsibilities outlined in the company’s QEHS manual and procedures.

What We’re Looking For

• Mechanical/Mechatronics Engineering Degree or equivalent qualification.
• Minimum of 5 years' hands-on experience in manufacturing or workshop environments.
• Strong mechanical assembly skills with an eye for detail.
• Proficiency in SolidWorks, Creo Parametric, AutoCAD Inventor; capable of producing BOMs and schematic drawings.
• Responsible, team-oriented, and able to communicate effectively in English.
• Strong interpersonal skills, with the ability to integrate seamlessly into an international environment.

What We Offer

• Competitive salary with comprehensive health insurance benefits.
• Clear pathways for career advancement and continuous professional development.
• A supportive and collaborative team environment that fosters growth and innovation.

About Us

Seamap Pte Ltd is a leading engineering company specializing in the design and manufacture of high-quality mechanical systems and components. With a focus on innovation, excellence, and cutting-edge solutions, we have earned a strong reputation for delivering world-class products and services across a wide range of industries. Our dedicated team of professionals is committed to making a meaningful impact and driving progress within the engineering sector.

Apply now to be part of an exciting journey with Seamap!

Job Description & Responsibilities:

• Design and Documentation: Carry out detailed electrical design, including sizing and drawing preparation. Develop technical documents, including P&ID (Piping & Instrumentation Diagrams), I/O wiring diagrams, and technical data sheets.
• Programming: Program and configure PLC/HMI systems to meet project specifications.
• Component Selection and Calculations: Perform electrical calculations and select components for ATEX environments, ensuring compliance with industry standards.
• Document Review: Review electrical documents and specifications provided by suppliers and consultants for accuracy and alignment with project needs.
• Supplier and Consultant Coordination: Work closely with suppliers, consultants, and sub-contractors to resolve technical issues both on-site and in-office settings.
• Interdisciplinary Coordination: Collaborate with engineers from other disciplines within the department to ensure cohesive project execution.
• Pre-Procurement and Evaluation: Prepare pre-procurement documents and conduct technical evaluations of quotations from vendors and suppliers.
• Overseas Project Support: Provide engineering support for international projects, including troubleshooting and technical assistance.
• Project Scheduling and Reporting: Assist in developing project schedules, creating work procedures and method statements, and preparing monthly progress reports.
• Hazardous Area Knowledge: Understand hazardous area classifications and select appropriate instruments for hazardous zones (e.g., EX-d, EX-i certifications).

Qualifications:

• Education: Minimum Diploma in Electrical Engineering or Mechatronics.
• Experience: At least 5 years of hands-on experience in electrical design and programming.
• Technical Skills: Proficiency in PLC/HMI programming, electrical calculations, and knowledge of ATEX standards.

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Summary:

Selected candidates will get the opportunity to work as Innovation Electronic Engineer on the design and production of our Next Generation subsea robotics products.

We are transitioning from our industry standard, human operated, hydraulic underwater Remotely Operated Vehicle (ROV) towards a highly autonomous ROV supervised from one of our remote operating centres.

The innovation electronic engineer will work in a team of experienced engineers on the ROV control system, working closely together with oversees R&D centres, internal production teams and global operational teams.

Development of Control system includes:

• Microcontroller, digital, analog, high speed circuitry design from conceptual to working product.
• Simple software programming in the area of peripheral configuration, device driver, test program to facilitate hardware validation.
• Liaise with production department to ensure products are manufactured to the highest quality standard.
• Travel to any part of the world in short notice to provide system support, integration, commissioning and training.

Requirements:

• Proficient in English. Written and spoken.
• Local polytechnic diploma, bachelors or Master’s degree in Electrical, Electronics Engineering.
• Able to perform analog, digital and PCB design with Altium.
• Able to produce isometrix projection drawing in Acad.
• Knowledge in signal integrity and high-speed PCB design.
• Working experience with microcontroller: Z180, PIC24, SAME5X …etc
• Self-motivated and able to work with minimum supervision.
• Passion in learning.
• Candidate with major in power electronic, robotics, automation or autonomous systems would be beneficial.

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Summary

The Tech-Shop, a part of the Fugro Singapore Marine, supports the Marine Site Characterisation and Marine Asset Integrity business activities in the Offshore Renewal Energy Market and the Offshore Oil and Gas Industry.

This is a technical role in a Tech-Shop environment, engaging in the maintenance, testing, troubleshooting and servicing of electrical and electronic equipment. Occasionally be involved in the mobilisation of equipment/systems onto vessels.

About the Role

• Maintenance, testing, troubleshooting and servicing of the equipment/system.
• Acquire In-depth knowledge of the equipment/system for which he/she is responsible.
• Inventories awareness of equipment/systems, accessories and spares.
• Initiate the purchase of associated accessories and spare part shortfall.
• Equipment and systems preparation and documentation.
• Provide training and guidance to others on equipment/system for which he/she is responsible.

About you

• Diploma in Electrical & Electronic Engineering or Diploma in Electronic & Computer Engineering or Diploma in Electronic or higher.
• Well-versed in verbal and written English language.
• Self-motivated.
• Keen aptitude for technological advancement.
• Good Logical thought processes.
• Work autonomously.
• Ability to prioritise tasks to meet deadlines;
• Excellent interpersonal skills:
• Adaptive to all kinds of working environments.

Additional Details

This job specification should not be construed to imply that these requirements are the exclusive standards of the position. It will be necessary to perform other related tasks and duties, from time to time, as required by Management.

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

How to apply

Please include your latest resume in the application.

Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).

We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

Statement Of Purpose (Overall Purpose of Job)

In charge of the execution of all Solar Installation works inclusive of planning, scheduling, controlling, coordination and ensure works carried out are in accordance to approved shop drawings / specification and complete within the completion date. In addition, budget control and contract administration.
Major Duties & Responsibilities
(A) Specific :

• Evaluate costing received for electrical works.
• Vet through shop drawings to ensure all are in compliance to technical specifications / authority requirements prior to submission.
• Liaise and have meetings with Clients and Consultants on technical resolution / clarification, inspection and submission.
• To be the lead contact point for all Project issues.
• To attend weekly site meeting.
• To build and maintain strong, long-lasting client relationship and meet Client’s expectations.
• To manage, coordinate, work and oversee all workers, sub-contractors and vendors to ensure proper work execution and good workmanship.
• To plan, implement, track the work progress and submit weekly progress report so as to ensure that the project executed is on time and within budget.
• To monitor project cost including variation works and submission of supporting documents.

(B) General :

• To prepare and submit progress reports.
• To maintain proper documentation for all projects.
• To coordinate and work with other departments.
• To engage, coordinate and oversee all project works to ensure successful completion and handing over to Clients.
• Other duties as assigned.

(C) Safety:

• To follow the safety procedures, rules and regulations and eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training :

• Degree or Diploma in Electrical Engineering or Equivalent.

(B) Knowledge & Skills :

• Well-versed with installation of M&E services and builder’s works.
• Experience in Design and Delivery Execution of Solar System Works and Load Sizing Of Solar Systems.
• Good interpersonal skills.
• Independent & Team player.
• Proactive and able to take initiative.
• Good in negotiation.
• Good communication skills (verbal and written).
• PC literate and knowledge in MS Office.

(C) Experience :

• Minimum 3 years of relevant experiences.

Responsibilities

MRO Operation Support

· Function as key engineering focal to provide technical advice on workscope management, repair dispositions, engineering repair quotes and technical support to Operations, Quality and Customers in meeting airworthiness and customer requirements.

· Support operations to perform repair assessment on nacelle components metallic and composite structures.

· Support communication with OEM on technical issues and component repair assessment.

· Prepare repair packages with detailed repair drawing, stress analysis and submission for airworthiness approvals.

· Perform basic design activities for tooling aid and assembly jig fixtures, coordination with vendor for fabrication and calibration.

· Support new repair capability development, system setup and airworthiness application.

· Support Quality reviews and investigations to enhance and improve engineering and operational processes.

· Identify, support, drive engineering and shop cost reduction and continuous improvement opportunities.

· Develop and conduct Engineering, Component and Product training to Operations Team.

Continuous Improvement

· Identification of new digitalization and I4.0 opportunities for technology introduction and automation into MRO operation

· Design simple RPA, with user guide to implement the process automation applications

Requirements

Education & Experience

· Degree / Master Degree in Mechanical Engineering / Aerospace Engineering or equivalent

· Fresh graduates are welcome. 3-7 years’ relevant experience is added advantage.

· Engineering trained, good team player, self-motivated, fast learner, good communication skill, and good authoring / literature composing.

· SMART Factory, Industry 4.0 experience & knowledge will be considered as added merits.

o Experience on new technology application

o Interest in digital database, data analytics. Programming skill – python, C#...visual studio…

Robot / Cobot application and integration

Skills

· Excellent computer skills – O365, Microsoft Visio, MathCad. Nastran and Patran, CATIA V5 is added advantage.

· Python or other programming language and software development is added advantage.

· Equipment troubleshooting skills such as debug or troubleshoot an existing system.

· Excellent Communication and presenting skills, able to clearly explain novel and complex ideas to stakeholders of all levels and within multidisciplinary teams.

· Excellent written communication skills for record keeping and documentation.

· Problem solving and creative thinking to troubleshoot problems as they arise and find effective solutions.

· Planning skills to detail project timeline, prioritize workload and keep accurate documentation.

· Flexibility & Adaptability –able to keep up with latest techniques and technologies as they develop.

Pls email your resume to [email protected]

Job Scope:

1. Able to assist in tender pricing of ACMV project/ Alteration & Additional Work.

2. Data Entry for the project material delivery, Bill of Quantity and Tender Pricing.

3. Serves as liaison between the user and in-house contractor on all ACMV related system.

4. Provide sizing and design of ACMV system (chilled water) for individual room

1. Coordinate with supplier / sub-contractor of the tender specification and obtain the quotation from them
2. Control and supervise workmen to make sure standards of building performance, quality, time and cost schedules, and safety are complied.
3. Responsible for keeping daily work record, including additional work claims to the clients and from the subcontractors

Qualification:

1. Strong knowledge of M&E details, working drawings and local construction practices
2. Conversant with local codes and regulations
3. Is a good team player and is analytical and a problem solver
4. Excellent in communication skills, both verbal and writing skills, with a high level of attention to detail
5. Strong interpersonal skills, ability to develop relationships and communicate with all levels of management
6. Proficient Microsoft Office and other IT software

Key Responsibilities

Leads the Industrial Engineering Team. Oversees methods and analysis including process design, time and motion study, and leads continual improvement initiatives.

Ensures projects and programs within areas of responsibility are completed and implementation into business with quality tools, supporting processes and ongoing measures for success. Includes improved efficiency and cost savings. Works across organizations to provide business case for Plan of Record and IE projects. Ensures cost analysis, and return on investment calculations associated with project meet annual operation plan and budget.

Leads ergonomics / human factors initiatives, drives process improvements, and provides engineering solutions. Drives and implements Ergonomic improvements across multiple functions.

Ensures manufacturing rearrangement projects, plant layouts, material flow and warehousing designs are optimized for cost, capability and capacity. Leads manufacturing and warehouse rearrangement projects across multiple functions; coordinates the efforts of other IE's to achieve plan of record objectives.

Drives the strategic implementation of product introductions into volume manufacturing by developing factory space, capacity and capability solutions. Develops the New products factory capability roadmap for assigned work centers.

Drives the development of specialized tooling solutions for the assembly, integration and intra-plant transport of modules, assemblies and mainframes.

Serves as a role model and sets the example, whose behavior is emulated by other engineering team members. (Safe behavior, follow proper protocols and procedures, including core values).

Drives capacity/demand analysis business processes and ensures that capacity planning processes are deployed and maintained across multiple functions. Oversees solutions to address capacity constraints and works with Operations and Logistics organizations to implement these solutions prior to production ramp. Drives manufacturing and logistics initiatives to improve factory asset utilization and production processes.

Leads and drives the effort to establish and document business processes across multiple functions.

Functional Knowledge

• Demonstrates in-depth understanding of concepts, theories and principles in own job family and basic knowledge of other related job families

Business Expertise

• Applies understanding of the industry and how own area contributes to the achievement of objectives

Leadership

• Manages a generally homogeneous team; adapts plans and priorities to meet service and/or operational challenges

Problem Solving

• Identifies and resolves technical, operational and organizational problems

Impact

• Impacts the level of service and the team’s ability to meet quality, volume, and timeliness objectives
• Guided by policies and resource requirements within business unit, department or sub-function

Interpersonal Skills

• Guides, influences and persuades others internally in related areas or externally

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Responsibilities:

o Handle Electron Beam Welding projects (on-the-job training).

o Plot drawings using Solidworks

o Competent in technical Engineering knowledge and specifications of drawings

o Pro-active in solving project issues and confident in liaising with customers

o Process scheduling

o Maintaining of processes, work instructions, documentations

o Trouble-shooting of machine breakdowns, if any, and liaising with Vendors.

Requirements:

• Degree in Mechanical/Materials Engineering or equivalent
• Welding experience is advantageous
• Responsible, independent worker who takes initiative
• Good communicator, motivated and reliable
• Minimum 2 years working experience
• Leadership Qualities
• 5 days
• Working Location: Loyang Street
• Salary commensurate with experience & qualifications
• For immediate employment

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.

Key Responsibilities

• Develop and execute complex projects that have a substantial mix of electrical, mechanical, physics, algorithms and software design; attend design reviews and provide input to meet market requirement specifications (MRS) and hardware/software specifications. Ensure designs meet market requirement specifications (MRS). Coordinate with project marketing and management to understand system requirements. Be able to chair architecture brainstorming meetings and drive the systems process to down select to a final architecture of a top-level system.
• Participate in the design, development, and testing of radio-frequency components for semiconductor equipment, which includes high-power generators (up to 6 kW or more), matching networks, filters, or other tuning elements, with frequencies ranging from 300 kHz to 60 MHz.
• Write detailed specifications that cover all aspects of subsystem modules including interfaces to the product by using systems analysis to create a diagram. Create concepts for complex architectural design approaches. Lead team evaluations of architectures to provide recommendation for best system solution approach.
• Ability to fabricate or modify RF components to change their performance or enable access for instrumentation.
• Ability to instrument, characterize and troubleshoot RF sub-systems within larger semiconductor tool environment.
• Problem identification and troubleshooting a wide range of difficult, complex engineering problems in field of technical expertise, including serviceability and manufacturability.
• Support System Integration during the assembly and final testing of new product designs.
• Interface with other groups to workout design, systems architecture development and integration issues.
• Define all equipment interfaces and systems architecture and ensure they are up to date and documented.
• Work with vendors to develop design requirements and ensure delivery of parts that meet specifications.

Education Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Physics or related engineering field with a 1-3 years of relevant RF experience

Functional Knowledge

• Understand principles and operation of network analyzers, oscilloscopes, power meters, directional couplers, and other radio-frequency test equipment
• Knowledge of circuit theory and ability to develop analytical models of RF components
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful

Work Location

• Science Park II

Can read mechanical drawing, and understand the schematic diagram.

Can use auto cad tool drawing the shop drawing.

Can coordinate with tunnel engineer and site supervisor settle the site works.

Can lead M&E team carry out the related works.

Can schedule the site works and arrange properly.

At least have 2 years experiences.

Willing to travel

Work at construction site.

have good communication and team work.

Job Objectives

Design and develop both optoelectronics devices and integrated photonics sub-system platforms. Devices includes but not limited to SOA, gain chips, FP lasers, DFB lasers (CW and DML) and SLEDs. Photonics integrated platforms include but not limited to photonics integrated circuits, Silicon-based integrated platforms, standard/custom packaged modules, as well as optoelectronics sub-systems (i.e. includes both optical and electronics sub-modules) to meet design goals and requirements.

Duties and Responsibilities

• Perform simulation of optoelectronic devices (CrossLight, ALDS, Optiwave), optical ray tracing (Zemax, Optalix), thermal (Solidworks) and electrical (5Spice) properties of optoelectronics devices
• Analysis of optoelectronics device epi growth, participate in wafer fabrication process integration, mask design integration, device functionality and reliability performance characterization and test results.
• With reference to state-of-art competitors, simulated performance and data-mining internal test-results database, you will refine the design, fabrication specifications, and simulation model and parameters to optimize fit between design and measured outcomes.
• Report generation of design and simulation outcome with support of experimental data, where available
• Build up database of optoelectronics device design white papers, and management of all design documentation repository
• Responsible for leading/co-leading programs with several major global players in the development of photonic integration solutions to support the Silicon Photonics platform for datacom and sensing applications.

1. Development will be beyond simplex monolithic integration with regrowth for spot size converters and array devices, towards multiple functionality PICs incorporating active devices of lasers, modulators and detectors with passive devices of waveguides, polarizers, MMI splitters and optical filters.
2. Development of multiple functionality PICs designed to be compatible to Silicon Photonics to form a larger scale integrated System-on-a-Chip component.

• Lead and manage qualification and transfer of product to manufacturing upon development completion.
• All other reasonable duties, as assigned

Qualification Guidelines

Minimum Education

Masters (in semiconductor based light emitting optoelectronics preferred)

Minimum Experience

Minimum 10 years’ working experience with technical background in optoelectronics and wafer fab processes in optical laser component, photonics device system and sub-system

Proven working experience in optoelectronics design and development and program/project management in the photonics manufacturing industry

RESPONSIBILITIES:

• Generate layout drawings, procedures, and technical specifications.
• Draft comprehensive scope of work for all mechanical engineering tasks.
• Produce technical specifications, requisitions, and detailed drawings (including plans, elevations, and arrangements).
• Coordinate engineering designs and manage interface-related issues.
• Strategize, develop, and innovate new products in alignment with project requirements.
• Enhance existing product designs for optimal performance and efficiency.
• Offer technical expertise to bridge the gap between product design and manufacturing processes.
• Lead and oversee investigations into the form and function of design features.
• Develop and refine technical drawings of mechanical parts and assemblies to convey design intent and guide manufacturing processes.
• Create communication documents to effectively convey design details to clients or manufacturing partners.
• Establish and maintain design history files for documentation and reference purposes.
• Validate system and product capabilities by designing and conducting feasibility studies and testing methods.
• Innovate manufacturing processes by designing and adapting equipment for component fabrication, assembly, and installation.
• Ensure system and product quality through the design and implementation of testing methods; verify finished product and system capabilities; validate fabrication, assembly, and installation procedures.

REQUIREMENTS:

• Hold a Bachelor's Degree in Mechanical or Mechatronics or any related field in Engineering.
• Possess a minimum of 5 years of experience in Engineering and Product Design, specifically in pressure vessels.
• Proficient in SolidWorks with a strong understanding of AutoCAD 3D or equivalent software, as well as valve differential designs.
• Familiarity with NFPA and relevant international pipeline design Codes and Standards is essential.

Job Description

• Develop, implement and maintain advanced methods, operation sequences, and process for the fabrication of gas distribution system components.
• Collaborate closely with cross-functional engineering teams to ensure the successful release of product improvements and new system designs.
• Lead the launch, approval, implementation, and documentation of engineering change requests to support design engineering and production operations.
• Estimate manufacturing costs, define time standards, and provide tooling and process recommendations to optimize efficiency and quality.
• Continuously identify opportunities to reduce manufacturing costs while improving product quality through rigorous analysis and problem-solving.
• Collaborate with test engineering to design and develop test fixtures, and assist in coordinating test fixture sourcing activities.
• Collect operational and test data, evaluate results, and take corrective and continuous improvement actions to optimize system performance.
• Evaluate work methods, procedures, and policies, actively contributing to the development and maintenance of streamlined business processes.
• Conduct root cause analysis and provide comprehensive failure analysis reports for issues encountered during assembly and testing of systems, with a focus on New Product Development projects.
• Perform Process Failure Mode, Effects, and Criticality Analysis, ensuring robust quality processes are in place.

Job Requirements

• Diploma/Degree in Mechanical/Manufacturing Engineering.
• Proficiency in CAD software, such as Solidworks and Autocad.
• Strong knowledge of mechanical design principles and analysis.
• In-depth understanding of materials, manufacturing processes, and quality control in semiconductor equipment manufacturing.
• Meticulous attention to detail and a strong commitment to delivering high-quality work.
• Ability to work collaboratively in a team environment while also being self-driven and able to work independently.
• Outstanding communication and interpersonal skills, enabling effective collaboration with colleagues and stakeholders.
• Familiarity with industry standards and regulations specific to semiconductor equipment manufacturing.