Total 20,089 telecommunication engineer job vacancies in Engineering category in Singapore

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 8 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

About the Role

Are you a Network Engineer looking to transition into cybersecurity? This is your opportunity! We are seeking candidates with strong networking skills who are eager to grow into cybersecurity experts. You’ll work on cutting-edge security projects, gain hands-on experience with advanced tools, and receive on-the-job training to build expertise across security domains.

Responsibilities

• Support security projects involving endpoint, network, and application security.
• Deploy and manage tools like Web Proxy, Endpoint Protection, Email Security, and Vulnerability Scanners.
• Assess system security through threat modeling and recommend improvements.
• Experiment with and integrate emerging technologies to enhance security.
• Collaborate with teams to secure cloud deployments and operations.

Requirements

• Bachelor’s degree in Computer Science, Information Technology, or related fields.
• 4+ years of experience as a Network Engineer or Security Engineer, with expertise in managing network infrastructure or security tools.
• Eagerness to learn and grow in cybersecurity, with a passion for securing systems and networks.
• Familiarity with networking protocols and tools, with exposure to security tools as a plus.
• Preferred: Security certifications (e.g., CISSP, CISM) or a willingness to pursue them.
• Experience with cloud environments is a bonus.
• Thrives in fast-paced and demanding environments.

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall have a good understanding in the technical execution of process plant systems within intricate water industry.
• The candidate shall have good proficiency in participating in design and construction initiatives utilising digital design methodologies.
• The candidate shall have experience in leading design consultancy and delivery, including multidisciplinary design.
• The candidate shall be able to write and review technical documentation (technical specifications, control philosophies, URS).
• The candidate shall have good knowledge ICA design (instrumentation, PLC and SCADA systems), motor control systems, system architecture, fieldbus/communication networks, P&ID’s, ATEX installation practice, functional safety, development of control specifications (URS/FDS), schedules and system requirements within process/industrial environment.
• The candidate shall have proficiency in designing within appropriate digital analysis packages, following applicable standards, working practices and national guidance.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall write, update and monitor efficient procedures to aid the smooth running of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall Ensure that design takes full regard for all health and safety requirements.
• The candidate shall support and help resolve any site technical difficulties & other problems that may arise.

Preferred Qualifications

• Degree in Electrical Engineering.
• Candidate shall have about 3 years experience in instrumentation, control and automation design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

• Up to $13,000
• World-Class Consultant
• Data Centre experience

• Develops and specifies applications of controls, instruments, and operating systems for all building engineering services purposes
• Surveys, tests, carries out dilapidation reports on existing electrical/mechanical installations
• Specifies activities to ensure that manufacturing, construction, installation, and operational testing confirm to functional specifications and customer requirements
• Day to day decision making on project progress and direct liaison with and provides advice to client
• Represents Company at technical meetings with customers, professional teams and contractors teams
• Ensures engineering calculations and drawings meet required robust industry and legal standards
• Leads on the coordination of engineering services
• Takes a holistic view in the selection and application of engineering concepts and solutions

Job Requirements

• BSc/BEng or degree in appropriate engineering discipline or have sufficient equivalent experience
• MCIBSE/MIEE or HNC/HND plus appropriate experience or equivalent
• Working towards Chartered Eng status
• Significant experience of specification design for several building types
• Sound knowledge of key Health and Safety issues and legislation
• Knowledge of MS Office applications word, excel etc
• Ability to use IT based calculation and spreadsheet software
• Good understanding of BS standards/ UK Regulations/Codes
• Ability to prioritise own workload
• Ability to work to deadlines
• Managerial skills
• Presentation skills

OTHER INFORMATION:

• Salary: Up to $13,000 / Negotiable (Salary will commensurate according to experience & qualifications).

HOW TO APPLY:

Simply submit your application with your updated Resume in MS Word Format to Ashwin Vivek Vinod (EA Personnel Reg. No.: R22111690) (BEP) by clicking the ‘Apply link’ or call your friendly Consultant, Ashwin Vivek Vinod, at 6590 9957 or 9178 0355 for a confidential discussion.

Please click APPLY NOW button to submit your application

Please indicate the below information in your resume:

• Current & Expected salary

• Reason(s) for leaving

• Availability to commence work

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We regret that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt-out by unsubscribing in the mailer. You may refer to and access our website at www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Kindly ensure your resumes provided to us does not contain your full NRIC number and full home address during your job application.

Process Engineer

Responsibilities may include but are not limited to:

· Support Manufacturing group with day-to-day troubleshooting and maintenance activities, identification of process improvement and optimization opportunities, review of SOPs and MBRs.

· Responsible for small to large-sized capital projects throughout all phases of the project lifecycle, including the development of user requirement specifications, process design, equipment and instrumentation specification/selection, equipment procurement, installation, commissioning, qualification, and turn-over to manufacturing.

· Project management aspects including project schedule, budget, and coordination of multi-disciplinary teams.

· Support Chemical Development and Manufacturing Services groups with activities such as technical transfer and scale-up of processes into manufacturing.

· Support EHS activities including PHA, PSSR, and PSM compliance.

· Support Validation activities including review of Factory Acceptance Test and Site Acceptance Test (FAT/SAT) protocols and participating in FAT/SAT execution, review of installation, operational, and performance qualification (IQ/OQ/PQ) protocols, participating in IOPQ execution, participation in Clean-in-Place (CIP) cycle development and equipment characterization, and review of final reports.

· Support Quality Assurance activities including writing, review, and/or resolution of Change Controls (CC/CSC), Corrective and Preventive Actions (CAPAs), and audit responses.

· Perform job functions and responsibilities independently and with limited direction.

Our requirements:

• Min Degree in Biomedical Sciences or related sciences
• Min of 2- 5 years’ experience in Process Engineer
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: Process Engineer)

Thank You.

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

[Order Number: 478047]

Responsibilities:

• Leading a team of Production Technicians, ensuring safe and seamless production operations, while collaborating with the Process Engineer to optimize processes and achieve operational and cost efficiency during shifts.
• Troubleshooting plant, equipment, and quality issues, recommending effective countermeasures, and actively monitoring plant equipment integrity and reliability.
• Supporting the Process Engineer in maintaining stable plant operation and product quality control by providing suitable operating conditions during shift operations.
• Overseeing the training and development of team members to enhance their skills and capabilities.

Requirements :
*Non-experienced candidate are welcome to apply*

• Capable of committing to a shift working schedule.

We regret that only shortlisted candidates will be notified.
However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Tan Sin Rou
EA Personnel Registration Number: R22106434
EA License no.: 07C5771

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Scope

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.

Requirement

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science
• Demonstrated ability to lead people or processes
• Laboratory experience required (testing, data reviewing, or other supporting activities for laboratory operation)
• Basic functional and technical knowledge of the discipline
• Good organization skills and attention to detail
• Ability to document clearly and concisely

For interested applicants:

Please send your resume to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities

Job Requirements:

• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Skills and experiences required

· Able to do AUTOCAD

· MS Office at least to intermediate level

· Able to work independently with minimal supervision

· Able to work under tight deadlines and schedules

· Good technical and communication skills

· Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

Duties & Responsibilities

· Coordinate piping design with other engineering disciplines

· Prepare piping layouts, general specifications and documents according to project standards.

· Analyze and interpret stress/vibration results, offering recommendations for piping system designs.

· Develop piping layouts for critical equipment like compressors and reactors, in 3D CAD if possible

· Review project documentation such as scope of work, schedules, and design basis.

· Assist in planning and organizing piping engineering activities, including manpower requirements and schedules, ensuring alignment with project scope and budget.

· Able to do material take-off (MTO) and ensure conformance with company design standards and compliance with project specifications, codes, and industry practices.

· Participate in inter-department coordination on all project-related issues

· Support field engineering during construction and advise on installation and testing.

· Conduct site visits

· Any other relevant tasks as assigned by Project Manager

Qualifications & Other requirements

· Diploma/Degree in relevant industry. Safety certifications an added advantage

· Min. 3-year working experience in a construction firm

· Ability to work well in high volume, fast-paced environment as a member of a collaborative team

· Singaporean or Singapore PR preferred

Position Overview:

As a Process Engineer for our Polyisoprene Rubber Latex manufacturing facility located in Singapore, Jurong Island. Responsibilities will include analyzing current processes, identifying areas for improvement, and implementing innovative solutions to enhance operational performance. The ideal candidate should have 3-5 years of experience in the Singapore petrochemical/refining sector and possess a strong understanding of process engineering principles. Experience in Rubber, Solid, Slurry will have an added advantage

Key Responsibilities:

Process Optimization: Identify and implement improvements in processes to enhance efficiency, reduce costs, and ensure compliance with safety and environmental standards.

Data Analysis: Analyze process data to identify trends, troubleshoot issues, and develop strategies for continuous improvement.

Project Management: Lead or participate in Initiative Projects aimed at upgrading or expanding existing processes, ensuring timely and cost-effective project delivery.

Collaboration: Work closely with cross-functional teams, including operations, maintenance, and safety, to achieve operational excellence and resolve any process-related issues.

Regulatory Compliance: Ensure that all processes adhere to local and international regulations, standards, and guidelines related to safety, environmental, and quality requirements.

Documentation: Maintain accurate and up-to-date documentation of processes, procedures, and engineering calculations.

Training and Development: Provide guidance and training to operators to enhance their understanding of processes and ensure adherence to best practices.

Qualifications and Skills:

Bachelor's degree in Chemical Engineering or a related field.

3-5 years of hands-on experience in process engineering within the petrochemical or refining industry.

Strong knowledge of process simulation tools, such as Aspen plus , excel based calculations

Familiar with safety and environmental regulations in the petrochemical sector.

Excellent problem-solving and analytical skills.

Effective communication skills and ability to work collaboratively in a team.

Project management experience ,SCEM and/or Water Efficiency Manager certified (Preferred)

a. Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements

b. To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.

c. To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)

d. To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.

e. To oversee all aspects relating to the construction of the Project, keeping and submitting records.

f. To provide full support and assistance, as and when directed by the SRE or client

g. To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.

h. To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.

i. Any other Adhoc tasks are given by management

Criteria:

- Min 4 years of civil engineering experience

- Min 2 years of experience in Dwall works

- Degree in Civil Engineering

- Accredited as a RE with IES

MECHANICAL ENGINEER

1) Qualifications

A Degree in Mechanical Engineering recognized by PEB.

A master’s Degree or PEB license would be an advantage

0-6 years of working experience in the consultancy form and design of ACMV, Fire, and Hydraulic services

Fresh graduates will be considered as well.

2) Business Development

Begin to build relationships with clients and consultants from other organizations.

3) Project Role

Carry out duties in accordance with company procedures and implement prescribed systems of work.

4) Company Role

Follow the company training scheme fulfilling objectives to assist personal development and provide a basis for future progression within the company.

Contribute to the development of the company systems by reviewing existing procedures and commenting using the feedback system.

Begin to take part in task groups to represent the team that you are working in.

Attend team meetings providing feedback on your/company's development where possible.

Applying policies relating to health & safety, quality, and training

5) Engineering Function

The role is an Engineer within a team working under close supervision or independently.

Responsible for the development and production of drawings/calculations/specifications/reports.

Understand design philosophy/design fundamentals.

Be familiar with Architect/Service Engineers drawings/specifications etc.

6) Behavioral

Carry out tasks and duties assigned in a positive and dignified manner.

Set an example for placement students and younger engineers.

7) Competencies

Business Awareness

Team Working

Building Relationships

Developing Self & Others

Persuading and Influencing

Communicating and Presenting

Delivering Results

Improving Performance

• Monitor UPS (Uninterruptible Power Supply) systems.
• Preventive & Corrective Maintenance
• Carry out or assist in preventive maintenance of UPS systems to ensure optimal performance.
• Execute corrective maintenance when necessary to resolve system faults or alarms.
• Perform additional tasks as needed to maintain the operational integrity of the UPS systems.
• Perform technical assistance for different components and systems in power management and backup solutions.
• Standby for any activation or system issues.
• Able to respond to short notice and work irregular hours to meet ad-hoc job assignments.

Requirements

• Minimum Higher Nitec in Electrical Engineering, Diploma in Electrical/Electronics Engineering or equivalent.

Job Summary:

At Hilton Garden Inn Singapore, Serangoon, as a Duty Engineer, you will be responsible for ensuring the smooth operation and maintenance of hotel facilities, systems, and equipment. Provide technical support and assistance to maintain high standards of guest satisfaction and safety.

Key Responsibilities:

• Perform routine inspections and maintenance tasks on hotel systems, equipment, and facilities.
• Conduct repairs and troubleshooting on electrical, plumbing, HVAC, and mechanical systems.
• Ensure prompt resolution of maintenance requests and work orders.
• Ensure compliance with hotel safety and security policies and procedures.
• Conduct regular safety inspections and report hazards or potential risks.
• Participate in emergency response procedures.
• Provide prompt and courteous assistance to guests with maintenance-related concerns.
• Ensure guest rooms and public areas are well-maintained and functional.
• Work closely with Housekeeping, Front Desk, and other departments to ensure seamless operations.
• Communicate maintenance schedules and updates to relevant teams.
• Maintain accurate records of maintenance activities, repairs, and inspections.
• Update and review maintenance schedules and procedures.
• Adhere to Hilton standards, regulations, and industry best practices.
• Ensure compliance with environmental and sustainability policies.

Requirements:

• Higher/Nitec in Electrical/Mechanical Engineering or related field.
• 2 years of experience in maintenance or engineering role, preferably in hospitality.
• Strong technical knowledge of electrical, plumbing, HVAC, and mechanical systems.
• Excellent problem-solving and communication skills.
• Ability to work independently and as part of a team.
• Flexibility to work rotating shifts, including nights, weekends, and public holidays

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 3 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

The title holder will be part of a team that design, test and commission electrical control systems for ACMV/HVAC systems in buildings. The candidate will work with other internal engineering teams to design the control system to meet the overall project objectives and goals.

Specific job responsibilities:

• Design and develop control strategy for automation system controls for building M&E systems (ACMV)
• Design and draft system control logic and drawing to meet project commitments
• Work closely with internal teams such as mechanical design and project engineers to design effective solutions to solve engineering problems
• Liaise with suppliers on components selection and quotation to develop project costing
• Review specifications and standard practices for projects and tenders
• Addresses issues brought about by feedback from customers and operations teams to improve the performance of the electrical and controls system

To excel in this job, the candidate will require a high level of organization, creativity, attention to detail, and engineering knowledge to successfully perform design, engineering and field start up tasks for System Integration in Electrical Controls for building M&E systems.

Minimum job requirements:

• Bachelor’s degree in Electrical/Controls/Electronics Engineering
• Relevant experience/ experience in ACMV design/controls is a plus
• Exceptional communication skills (written and verbal)
• Ability to prioritize and work independently to meet project timelines

Work Location: Changi Airport Office

This post will involve research, design and develop innovative product to fulfil our customer’s industrial needs that focus mainly on Automation (Robotics) and Technology.

Job Description

• Design and develop customized product based on customer’s requirement
• Attend meetings with customer to understand problems and develop solutions that satisfy their project requests
• Conduct research and source for suitable material, product or tools that aids manufacturing process
• Project co-ordination and timeline control between customers and factory
• Support factory during manufacturing assembly
• Identifying areas of weakness in the production line or finished products and making recommendations for improvement
• Develop design documents for mechanical parts and final products
• Assist Superior to accomplish ad-hoc projects on hand if needed

Job Requirements

• Bachelor's Degree in relevant technical discipline
• At least 1-2 years of relevant experience
• Proficient with ME design tools like AutoCAD, SolidWorks, etc.
• Knowledge in electrical, mechanical, and pneumatics fundamentals
• Good research and problem-solving skills
• Working knowledge on motion system design, machining and design process from prototyping, tooling or sheet metal fabrication is a plus
• Experience in programming microcontrollers (STM32, ESP32) in C/C++ or other relevant languages would be an advantage
• Ability to work under tight schedule and willing to put in extra effort to meet project deadline
• Good team player with strong communication and interpersonal skill
• Be initiative and able to work independently with minimal supervision

• Understand the drawings and job specifications; Draft method statements on the assigned tasks and seek approval from supervisor
• Plan and order for equipment and material required on the tasks; Seek client approvals (as and when required) on time to minimise delays
• Prepare the ITP (inspection and test plan) documents, job hazard analysis (JHA) and risk assessment report for the assigned tasks in consultation with supervisor
• Liaise and coordinate with all respective Utilities Agencies
• Plan and monitor all utility diversion works
• Coordination with the site team and the various utilities agencies on the management of Utilities, diversions, temporary/permanent supports etc
• Monitor progress against the program milestones for on-time completion; Monitor production rate and provide feedback to supervisor on resource allocation
• Check workmanship and quality against specifications in drawings and ITP requirements; Perform other quality tests as required
• Provide inputs to supervisor to minimise wastage and optimise material/labour costs;

Requirements:

• Degree/Diploma in Civil, Mechanical or Electrical Engineering
• At least 3 years of experience in managing utilities diversion, planning and construction works
• Independent and able to work with multiple stakeholders

Job Descriptions:

• Overseeing and directing construction projects from conception to completion
• In-depth reviewing of projects to schedule deliverables and cost estimation
• Ensure safety procedures are implemented and meet company’s standard and legislation
• Ensure safety and health are in place according to building and safety regulations
• Monitor, control, and coordinate site works
• Ensure projects meet customer’s quality standards
• Any d-hoc duties as require

Requirements:

• Degree in Civil Engineering or equivalent with at least 5 years relevant experiences at or equivalent managerial level in construction
• Knowledge in Design and Auto Cad (3D) for Civil Structure work.
• Good communication skills
• Able to communicate in English and Japanese language (to handle queries and feedback from Japanese speaking associates/ clients)