Total 5,018 Engineering job vacancies in d05 clementi new town hong leong garden pasir panjang

Job scope

As a Senior RF application engineer, you will be responsible for developing/testing the evaluation board and product board for RF SoC targeting at UWB and BLE applications. Your responsibilities will include collaborating closely with chip designers to understand the chip function and testing requirement, and optimize the performance of the solution at a system level. Additionally, you will provide direct support to end customers in integrating the chip into their products.

Key responsibilities:

1. Develop and test EVBs for RF SoC targeting at UWB and BLE application

2. Develop and test product board including RF SoC, flash, power supply, filter, antenna, etc.

3. Conduct test and work with certification bodies for FCC, CE, CCC certification

4. Provide support to end customer for chip integration

Key Knowledge Requirements:

1. Familiar with typical power supply circuit e.g. DCDC, LDO, and the design principles of power integrity and isolation

2. Understanding of signal integrity for high-speed digital signals

3. Knowledge of transmission line impedance, matching, filter, EMC/EMI, antenna

4. Familiar with the requirement and testing of FCC, CE, CCC certification

5. Proficiency in PCB design software PADS/Altium Designer/Allegro for schematic design, PCB design, BOM generation

6. Experience with RF testing equipment including spectrum analyser, signal generator, oscilloscope, network analyser

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.

We are looking for people who

• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

Job Description

About the role

Works closely with and have impact on: Manufacturing Engineering, Supplier Quality

Reports to: Senior Molding Engineering Manager

Function: Global Research & Development

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible for the plastic injection tooling and molding project management of new product developments, transferred projects, capacity expansion, as well as continuous improvement for production tooling.

Duties and Responsibilities

> Plan and manage molding engineering budget

> Support all molding engineering related projects

> Lead projects related to quality, yield, process efficiency, and capacity improvement

> Lead end-of-life issues pertaining to product materials and components

> Lead qualifications of 2nd source of materials or equipment for business continuity

In New Product Development Support,

> To be accountable as project leader for tooling development from prototype until mass production stage. Tasks are included but not limited to below aspects:

• Manage the tooling project to ensure project timeline, capital investment and tooling performance target are consistently met
• Review and provide valuable input to Design For Manufacturing (DFM) documents from mold maker, and to assist R&D product designers to optimize product design from tooling scalability and best molding production cost perspective
• Analyze and understand product design, generate mold specification and acceptance criteria, conduct mold design review
• Oversee mold, equipment, process testing and debugging, conduct testing result review and drive mold performance improvement
• Document and transfer tooling knowledge from 1 cav prototype to multi cav mass production tooling
• Molding supplier factory molding validation IQ/OQ/PQ review

> Collaborate with in-house manufacturing and quality team to qualify new tooling. The tooling are for injector parts, IOL optical PP mold, and process aids for material production

> Compile tooling and molding related documentation in accordance to the regulatory requirements, and maintain the quality of molded components

> Initiate the Change Control submission and review, conduct Risk Assessment, draft and get Validation Plan, Validation Protocol/Report reviewed and approved based on the project master plan

In Sustaining Engineering

• Monitor and evaluate production tooling performance at vendor sites and lead the project to develop new tooling for capacity expansion and replacement/renewal
• Trouble shoot IOL and injector defects potentially related with injection molding production which occurs in the vendor’s manufacturing site (Japan, Singapore, Malaysia, etc.), drive solutions with data analysis and fact-based approach
• Be involved in sourcing of alternative vendor of plastic tooling and molding production for long term business sustainability

Requirements

Experience

• At least 3 years of technical experience in medical device/pharmaceutical industry
• Understand IQ/OQ/PQ validation requirement in accordance with IS013485 standard
• Able to write, review and coach validation protocol and report
• Track record of successful tooling and molding project management, tool makers and molding suppliers handling experience in the region
• At least 3 years of hands on experience in tooling design and Design For Manufacturing (DFM) for product and tooling design
• Solid molding process knowledge is required, and with at least 3 years of Scientific Molding practitioner

Skills/Accreditations

• Preferably Lean 6 sigma green belt trained, understand DMAIC approach, Failure Mode Effect Analysis (FMEA), Gauge R&R and Design of Experiment for trouble shooting and process improvement
• Strong technical writing skills
• Quick learner with logical thinking, good communication skills in English, customer focused, ability to drive results
• Able to read and speak Japanese is a plus

Academic Qualifications

• Bachelor‘s degree in mechanical or chemical engineering field related to plastic injection molding, or diploma in Engineering with more than 3 years experience in project management of customized mold design

Travel requirements

• 10 – 25%

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

Job Description:

• Administer project planning and project execution;
• Ensure all project activities are peformed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner;
• Coordinate the mobilisation/demobilisation of construction equipment to suit construction schedules;
• Assist with cost control and estimating activities;
• Check and verify subcontractor claims and variations;
• Maintain close liaison and communication with field operations team;
• Ensure all company reports and documentation are completed accurately and on time;
• Perform any other related duties as and when assigned by Manager.

Job Requirements:

• Diploma/Degree in Mechanical Engineer or related Engineering field;
• Min. 3 years of related field experience;
• Knowledge of Autocard will be advantageous;
• Dynamic and good team player;
• Able to travel overseas as and when required.

(1) Overview and purpose of the position*

1) Responsible in overseeing the performance of outsourced maintenance service providers in mechanical services and systems for the hospital and ensure functionality as well as serviceable at all times.

2)To audit and monitor service standards rendered by specialist vendor and outsourced maintenance service provider.

3)To provide support to Head of Department and Building Managers in capital nature replacements, systems and building improvement projects.

4)To coordinate and support hospital’s A&A and minor works.

(2) Accountabilities*

(2) Related Performance Indicators

1) Strong culture of staff and leadership accountability

• Work closely with FM Institution Lead and Mechanical Lead, in building clear scope, expectations and deliverables for the Mechanical team as well as planning for specialty training and develop the capabilities of Mechanical Team members.
• As a Subject matter expert to assist the Mechanical Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.

2) Contract management, evaluation, negotiation, and execution

• Manage Mechanical systems contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licencing.
• Ensure processes are in accordance and compliance with Audit Compliance, NUHS Contract Management, Procurement and Finance Policies and Process.

3) Manage Managing Agent, vendors and liaison with authorities as well as communication to stakeholders

• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with Admin on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Monitor vendors’ performance, deliverables and Key Performance Indicators (KPIs) are as per contract awarded.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical systems breakdown and recommend improvement plan as needed.
• Filing and documentation recording of all authorities’ correspondences.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical Team as the liaison party on authority matters.

4) Developing and implementing procedures, policies and checklists

• Review and update Standard Operating Procedures (SOP) and working instructions on a regular basis.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.

5) Asset Management

• Plan and oversee Mechanical system upgrades/improvements or replacements before their expiration or its end of life.

6) Projects

• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award (ATA) papers for Preventive Maintenance Contracts and projects.

7) Knowledge management

• Maintain good documentation (e.g records of all contracts, reports, agreements, check lists) with FM Admin team to ensure full compliance.

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

• Minimum three (3) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders)
• Experience in Fire Safety/ Alarm System, Medical Gas/ Vacuum System, Lift and Escalator System, Pneumatic Tube System, Mechanical Automation system is advantageous.
• Health care experience is advantageous.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior/ Data & Machine Learning Engineer is a hybrid role focusing on developing our modern Lakehouse including pipeline development, and the deployment of machine learning models.

This position combines the responsibilities of a Data Engineer and Machine Learning Engineer, ensuring robust data pipelines and scalable deployment of ML models.

The role involves building data ingestion and transformation processes, deploying machine learning models, and working with DevOps and CI/CD for automated deployments and monitoring.

Collaborating with Business Analysts to ensure business requirements are translated into data solutions.

Working with Data Analysts to deliver accurate and reliable datasets that power impactful analytics and dashboards.

Partnering with other Data Engineers and Analytics teams (e.g., Quantitative Research team) to support advanced analytics and provide datasets for reporting and insights.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and translate this into technical analytical solutions.

Responsibilities

• Design and maintain data pipelines: Design, build, automate, and optimize ETL/ELT pipelines to support data flow, transformation, and availability across the Lakehouse platform.

• Collaborate on data storage and solutions: Partner with analysts to create scalable storage solutions, optimizing data structures for both analytics and ML applications.

• Implement data quality and governance standards: Establish monitoring and enforce data quality checks, ensuring data consistency, reliability, and compliance.

• Optimize and maintain model performance: Continuously monitor deployed models for performance, retraining or adjusting them as needed to ensure sustained accuracy.

• Deploy and monitor machine learning models: Design and implement CI/CD pipelines for model deployment, ensuring efficient and reliable delivery of ML models.

• Mentor junior team members: Guide and foster the professional development of junior data engineers, enabling their contribution to the team and ownership of project deliveries.

Expertise:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.

• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.

• Data Pipeline Development Skills: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.

• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.

• Python & Model Deployment Proficiency: Expertise in Python for deploying models and developing APIs for serving predictions.

• Spark & Azure Databricks: Skilled in using Spark on Databricks for processing large-scale datasets and supporting machine learning workflows.

Knowledge of:

• CI/CD Pipeline Creation (incl. for ML Models): Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines and machine learning models using GitHub and GitHub Actions with Databricks.

• Monitoring & Model Maintenance: Ability to set up monitoring tools for models, track metrics (accuracy, latency), and maintain model performance.

• IaC for Infrastructure Automation: Experience in automating cloud infrastructure management for consistent deployment and scaling using Infrastructure as Code tools like Terraform.

• Power BI Integration: Basic understanding of Power BI for creating visualizations of model performance and metrics for stakeholders.

• Agile Methodologies in Data Engineering: Understanding of agile frameworks to work within iterative sprints and collaborate with cross-functional teams

Experience:

• At least 3 Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.

• 1 Year in Machine Learning Engineering: Track record in managing the lifecycle of machine learning models, including deployment, monitoring, and retraining.

• Business & Data Transformation: Experience working in supporting business transformation and process improvement into Data-Driven organizations and systems.

• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Responsibilities

· Functional blocks and/or subsystems of digital ASICs from design to silicon verification. This includes RTL coding, verification, silicon validation, and qualification.

· Proactively work with other team members and partners to align on specifications, conduct reviews, and complete documentation.

· Contribute to ASIC roadmaps and future innovation.

· Develop technical leadership skills.

· Participate in co-development activities to help prototype ASIC designs in FPGA or other software models to support pre-silicon firmware development and verification.

Education And Experience Required

· BS or MS degree in electrical engineering or equivalent with focus on VLSI design experience

· Fresh MS graduates are welcome.

Knowledge And Skills

· Knowledge of submicron semiconductor technology

· Familiar with digital ASIC/SOC design flow from RTL to silicon characterization

· Familiar with Synopsys and Cadence EDA tools for Simulation, Synthesis, Timing (STA), Formal and Assertion based verification, etc.

· Familiar with design and programming languages: Verilog, System Verilog, Python, Perl, C, C++, etc.

· Ability to apply analytical and problem-solving skills

· Strong written and verbal communication skills, ability to negotiate design features and options

· Knowledge of embedded system design, verification, and product development lifecycle

· Deep knowledge and domain know-hows in ARM/RISC-V microprocessor subsystem

Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

Primary Objectives of Position

• Manage the overall supervision of maintenance activities in depot and workshop
• Responsible for the availability of passenger trains, engineering train vehicles, light rail vehicles and workshop overhaul or plant equipment for mainline operation.
• Manage the budget expenditure of the section
• Ensure all defects on vehicles/equipment are rectified in a safe and responsive way.
• Provide an effective technical support service to all other Rolling Stock sections, including development and control of an overall maintenance plan, provision of Work Instructions, procedures and technical documentation and provision of regular performance information.
• Ensure that Rolling Stock staff and contractors within their sections are adequately trained and competent to perform their tasks safely and proficiently in the railway environment.
• Overall-in-charge of managing corrective and preventive maintenance of NEL/SPLRT passenger trains, engineering trains, light rail vehicles, or depot plant equipment.
• Overall-in-charge for all engineering projects in NEL/SPLRT Rolling Stock.

Major Responsibilities

• The day-to-day management of staff in their section.
• Ensuring individual roles, functions and responsibilities are clearly defined and communicated.
• Managing section budget resources to maximize maintenance outcomes and improve customer satisfaction.
• Providing advice and support to the HOD and Executive management as required.
• Identifying areas for improvement through training and development programs
• Ensure all staff are adequately trained and competent.
• Manage, lead, and motivate the section to achieve reliability, quality, cost and availability targets to meet customer needs.
• Maintain the performance of all vehicles and depot equipment.
• Perform and standby for company and department duty schedule such as PST, EIC, AEIC or Rerailment duty

The above activities are no means exhaustive and are subjected to amendment whenever is needed

Specific Safety Responsibilities

• Ensure all work related to the section are undertaken in a safe way during all maintenance activities in Sengkang Depot.
• Undertake Monthly Safety Observations of all areas under the purview of Rolling Stock and ensure that controls are in place to achieve safety.

Job Specifications

Minimum Education / Qualifications

• Degree or Diploma in Engineering from a recognized university or polytechnic.

Minimum Years of Relevant Experience

• Preferably with 3 years of relevant experience in Railway Engineering/Maintenance or equivalent

Knowledge/Skills

• Strong Communication, Writing, Analytical and Problem solving skills
• Knowledge of Training and Development, preferably with full ACTA qualification
• Conversant in MS Office software (Word, Excel, PowerPoint)

Attributes

• Highly motivated and resourceful team player
• Strong interpersonal and communication skills
• Strong planning and organization skills
• Analytical and meticulous

Process Associate Engineer (Die Prep) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machine related to production
• Process monitoring via SPC / real time monitoring system
• Work on process improvement projects
• Handle disposition and on hold lots
• Maintain good housekeeping in the production area
• Support in recipe setup and qualification for production
• Assist to troubleshoot process-related issue
• Collect engineering data
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline
• Minimum 2 years’ experience working in semiconductor manufacturing environment
• Minimum 2 years of experience working in Die Preparation process such as Backgrind, Dicing and Laser-grooving.
• Knowledge in basic SPC and Microsoft Office
• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night)

Job Duties & Responsibilities

• Research and analyze the project requirement, design the test case and develop test solution

• Take ownership of leading the quality of an assigned project and its features.

• Coordinate the execution of automated tests with a project’s testing cadence.

• Functional/ Regression testing verification.

• API and backend testing.

• Data analytics testing.

• UI and UX analysis and testing.

• Communicate with stakeholders and teammates of testing status and results.

• Contribute to collaboration with test automation team to continuously expand test coverage.

• Contribute to test case prioritization for manual and automated testing prioritization.

• Contribute to optimizing test case prioritization to increase testing velocity.

• Contribute to organisation’s Global QA improvement and project team’s quality process.

• Should have worked on Automation Tests for desktop based application

Job Requirements:

• Minimum Bachelor or Master Degree in IT/Computer Science or similar study background with 5 or more years of experience as a Software Developer Engineer in Testing (SDET)

• Good Knowledge of programming languages like Java, JavaScript and HTML

• Good to have knowledge on Banking or Finance.

• Expertise in automation testing tools like Selenium, Rest Assured , Cypress and Cucumber

• Expertise in BDD, Data Driven, Hybrid Test Automation Framework

• Hands on knowledge of desktop based app and its automation

• Able to adapt to changing business and project priorities.

• Proactive in bringing solutions to observed gaps in requirements and process.

• Proactive in test planning; able to identify and breakout tasks based on a test plan.

• Able to prioritize and execute QA tasks with minimal supervision.

• Execute tasks from QA lead or above.

• Mentor and guide junior level Associate QA Engineers and QA Engineers.

• Perform root cause analysis.

• Install and/or configure tests for systems.

• Optimize test cases for higher efficiency, especially for specific changes in code or features.

• Test client-server interaction.

• Test user behavior analytics.

• Analyze and test UI and UX requirements.

• JIRA and Confluence

Nice To Have Experience:

• Automation test result analysis and investigation of failures.

• Perform change impact analysis.

• Perform risk-based test analysis.

• Bonus skills and tools knowledge:

· GitHub and Bitbucket

· Docker

· Postman

· Jenkins CI

· JavaScript, Node.js & Selenium WebDriverIO

· Kubernetes

· Xray test case management tools

· AWS Cloud.

Interested applicants please send your resume in MS Word format and attention it to Joanna Tan (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

Business Registration Number: 200611680D. Licence Number: 10C5117

Join Our Growing Team!

The SKYLINK Group is a premier all-in-one mobility solution provider for retail sales of passenger cars and commercial vehicles, all vehicle leasing, Motor insurance, credit Hire Purchase financing, Motor workshop with full capacity of MRO (Maintenance, Repair and Overhaul) services, and vehicle body engineering works for all commercial and passenger vehicles.

Since 2017, SKYLINK Group has been rapidly expanding its offerings and fleet. We have served over 5,000 corporate customers including major industry leaders in logistics, distribution, F&B, marine, construction, sanitation, and government services.

With a commitment to fleet modernization, we have expanded our offerings to EV and Hybrid vehicles, and continuously aspire to provide greater value to our customers.

Be a part of the SKYLINK family and kick-start your career growth and progression in the mobility space today.

Job Description:

• Assist in the recruitment process, from job posting and candidate sourcing to conducting interviews and coordinating with hiring managers.
• Handle applications, renewals, and cancellations of work passes in the compliance with regulatory requirements.
• Serve as the primary point of contact for work pass matters, ensuring timely and accurate processing.
• Use Info-Tech software to manage HR functions, including e-attendance, leave applications, and claims submissions.
• Assist staff with the use of the Info-Tech systems, troubleshooting any issues and coordinating with relevant teams for support as needed.
• Manage end-to-end onboarding and offboarding processes, including preparing necessary documents, conduction tours, and handling exit formalities.
• Provide an orientation tour to all new hires, familiarizing them with the company culture, facilities, and key personnel.
• Prepare and distribute company memos and communications in both English and Chinese to ensure clear and effective communication across all levels.
• Support general office administration tasks as needed.
• Assist in organizing company festive events and celebrations, coordinating venues, and materials to promote team engagement and a positive workplace culture.

Job Requirement:

• MiDiploma in human resources, Business Administration or a related filed.
• 1-2 years of HR experience including recruitment.
• Proficiency in Info-Tech software is required.
• Strong proficiency in MS Office.
• Bilingual in English and Chinese, with the ability to prepare written communications in both languages.
• Strong communication and interpersonal skills, with the ability to interact with staff at all levels.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Create application design by working with technical leads and architects.
• Create and maintain high-quality Design documentation.
• Produce code with established design principles including static and dynamic code analysis.
• Proactively learn related architectural components including Databases, Message Broker\Contribute to deployment activities including Dockerization, CI/CD pipelines.
• Collaborate in a multi-cultural team.

Requirements:

• 5+ years of experience in Cloud Application development.
• Strong programming knowledge in one or more programming languages – preferably in Python / Golang / Java.

1. Able to produce a clear and maintainable codebase. Knowledge of clean coding practices such as S.O.L.I.D is essential.
2. Demonstrate skills in unit testing and appreciate the benefits of test suites.

• Demonstrate knowledge of REST API best practices and design guidelines.

1. Strong skill set in one or more REST API frameworks – such as Spring Boot, FAST API, and Flask.
2. Expected to know the performance, deployment, and security considerations of REST API

• Highly desirable to have GraphQL experience supporting Frontend applications.
• Hands-on experience in one or more relational Database systems – preferably in PostgreSQL.

1. Demonstrate ability to independently design Schema, usage of ORM tools, and write plain SQL.

• Working knowledge of event-driven architecture and experience in one or more Message Brokers, preferably Kafka.
• Essential to know the fundamentals of containerized applications.
• Able to work by integrating design with other teams even with insufficient/partial information.
• Desirable to have a working knowledge of public cloud infrastructure, preferably in AWS.

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

About the Power Generation & Energy – Senior Technical Consultant role:

In this consultative heavy role, you will be assigned to project teams to provide strategic, unbiased and objective advisory services to clients to assist them in solving issues, creating value, maximizing growth and improving business performance. You will also be responsible for contributing to and working on internal projects focused on the ‘Worley Consulting Way’.

Key Responsibilities :

• Collaborate with cross functional teams to deliver on key responsibilities in an assignment under tight deadlines.
• Draft written communication including reports, presentations, contractual letters and project plans.
• Ability to analyze technical problems and solve them without experiencing any stress. Experience in conceptual design of Power and electrical engineering systems and equipment’s is needed.
• Interview the client's employees, management team and other stakeholders as required for the assignments.
• Performa data/risk/business/financial analysis and integrate large volumes of data from various sources to create reports.
• Participate and contribute to client meetings.
• Produce plans and budgets relating to assignment management.
• Plan and manage some elements of an assignment - plan, time, cost, outcomes etc.
• Participate in the development of a safe and healthy workplace.

Key Skills and Competencies :

• Experience in the field of power generation design, techno-commercial evaluation of bids, proposals, tender submissions, Lender technical advisory role for project financial close as well project finance.
• Experience in Project execution in the field of power generation using gas to power, biomass fuels, renewables (wind / Solar / Waste to Energy), coal and for co-generation.
• Experience in supporting the development of Power Projects (Gas to Power, Coal, Biomass, Waste to Energy, solar and Geothermal), Lenders Technical Advisory Role with Banks for the successful completion of project financial close is preferred.
• Experience in Thermoflow modelling (for Mechanical) or Static and Dynamic Power System study (for Electrical) for grid connections is highly desirable.
• Experience in conducting technical design review with EPC Contractor for the implementation of power generation projects in Coal, Gas to Power, biomass, renewables (Wind / Solar / Waste to Energy) energy sector.
• Technical Support to project manager tender evaluation phase, subsequent negotiation phase as well as the project implementation phase on site including erection and commissioning.
• Experience in electrical equipment sizing and preparation technical specification for the various electrical equipment involved in the project.
• Experience in dealing with Chinese EPC contractor is preferable.
• Demonstrated flexible and adaptable approach and able to operate in different ways in different situations.
• Strong research and organization skills and ability to work independently and think critically.
• Excellent presentation, written and verbal communication skills.
• Confidence in dealing with senior people in organizations.
• A proactive approach to project delivery and business development.
• Collaborative team player and be able to demonstrate research skills.

Key Requirements:

• Degree in Mechanical or Electrical Engineering with 5 to 12 years of experience in Consulting, and/or EPC Contractor in reputed international organization
• Candidates with a double degree in engineering or experience with Renewable Energy projects will be looked favorably.
• Experience in providing project and business solutions to clients in the infrastructure and resources sectors highly preferable.

Job Responsibilities:

• Drafting out MEMO, newsletters, articles and reports in English and Chinese language
• Support Department and Company on operational matters at corporate level
• Manage office equipment and stationery procurement
• Arrangement of flights, visas letters and hotel reservations for overseas travellers
• Coordinate company’s logistics matters for various stakeholders
• Facilitate submission of operations-related reports to Singapore and China HQ
• Manage corporate entertainment and office general operation

Job Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in any field
• Required skills: MS Office, MS Word
• At least 3 years of working experience in the related field is required for this position.
• Preferably Junior Executives specializing in Clerical/Administrative Support or equivalent

Responsibilities:

• CAD Modeling: Work with detailed 3D models and assemblies using industry-standard CAD software to design robotic components and systems.
• Mechanical Design: Collaborate with senior engineers to develop mechanical designs that meet project requirements, including structural integrity, functionality, and manufacturability.
• Prototyping: Assist in the prototyping and testing of mechanical components and systems to evaluate their performance and make necessary improvements.
• Documentation: Prepare technical documentation, including design specifications, drawings, and reports, to communicate design concepts and results effectively.
• Collaboration: Work closely with cross-functional teams, including colleagues on other engineering teams, project managers, and the production team to ensure seamless integration of mechanical systems within robotic platforms.
• Problem Solving: Identify and troubleshoot mechanical design issues, providing creative and practical solutions to engineering challenges.

Requirements:

• Polytechnic/University undergraduates currently pursuing diploma/degree in Mechatronics, Robotics, Mechanical, Electrical, Electronics, Computer Engineering or a related field.
• Strong interest in robotics and automation technologies.
• Strong analytical and problem-solving skills.
• Strong communication skills in English (both oral and written)
• Proficiency in CAD software, such as SolidWorks or AutoCAD
• Strong understanding of mechanical design principles and fundamentals.
• Eagerness to learn and apply new engineering concepts and technologies.
• Excellent communication and teamwork skills.
• Attention to detail and a commitment to delivering high-quality work.
• Preferred: Knowledge of materials science and manufacturing processes.
• Preferred: Experience with 3D printing and rapid prototyping.

Key Responsibilities:

• Develop hardware for switched-mode power supplies and battery chargers.
• Perform topology selection, circuit design, component selection, and power loss calculations based on customer specifications.
• Design schematic and PCB layout based on product design.
• Craft test and verification plan to ensure product design can comply with customer requirements.
• Ensure the product can meet safety and certification requirements.
• Resolve issues with design promptly based on customer and internal feedback.
• Liaise with multiple parties – customer, factory, and internal/external stakeholders to ensure successful delivery of the product.
• Good communication skills to ensure effective collaboration within a diverse team.
• All experience levels are welcome – job grade and salary will be commensurate with relevant experience.

Requirements:

• BSc, MSc, PhD, or researcher with Min. 3 years experience.
• Knowledge of power electronics topologies and design – flyback, boost PFC, LLC, PSFB.
• Experience designing CC/CV charger systems and working on power supplies with power levels >500W.
• Working experience in schematic design and PCB layout software, e.g. OrCAD, PADS, or other equivalent software
• Familiar with simulation tools, e.g. LTspice, PSIM, or other equivalent software
• Acquainted with test equipment such as AC/DC source, electronic load, oscilloscope, and soldering iron.
• Candidates with the below skillsets will be an added advantage.

1. Experience in volume manufacturing.
2. Experience in the automotive industry.

Process Engineer (Wet) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in Wet process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer (Thin Film) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in thin film process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor's degree in chemical engineering, materials science, microelectronics or similar disciplines.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in SPC, DOE, FEMA, and 8D reports
• Experience in semiconductor industry would be an added advantage
• Fresh graduates are welcome to apply

Process Engineer (Backend) is responsible for development and establishment of production process.

Responsibilities

• Responsible for Backend process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control. Review and maintain FMEA, Control plan, OCAP with cross-functional teams.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line

Requirement

• Minimum bachelor's degree in material science, microelectronics, mechanical engineering or relevant engineering field
• Experience in semiconductor manufacturing industry and working in cleanroom environment
• Hands-on process experience in Backend Process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc within semiconductor IC packaging industry
• Experience in SPC, DPE, FMEA, OCAP, WI, CPK, PPK, 4D/8D report

Process Associate Engineer (Backend) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in Semiconductor and LCD processes are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machines related to production
• Monitor process via SPC chart/real time monitoring system
• Work on continuous improvement projects
• Perform lots on hold and disposition
• Support in recipe setup and qualification for production
• Troubleshoot process-related issue
• Collect engineering data
• Prepare manufacturing documents
• Maintain good housekeeping in the production area
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics Engineering or similar disciplines
• Process experience in Backend Process: Pick and Place, SMT/SMD, Ball mounting, Reflow, Laser Marking and Package Sawing
• Experience in Packing (TnR, Tray, MBB, etc) is an added advantage
• Experience working in semiconductor manufacturing environment
• Experience in manufacturing documentation of SPC, WI, SOP, FMEA, etc.
• Able to work under various shift pattern. The selected candidate will start with normal office hours, and eventually transition to 12-hour rotating shift between day and night