Total 7,918 Engineering job vacancies in woodlands tuas north west

The Engineer is responsible for the below:

• Preparation and updating of project schedule.
• Conduct site Audit on the sub-contractor/vendor.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorised inspector to ensure project requirement are fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that qulity records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.

Position Summary

As Engineering Project Electrical Section Lead to roll the overall electrical engineering activities

To provide technical guidance to fellow Draftsman, Assist. Engineer and Engineer for competencies development

To complete assigned tasks within allocated timeline with high degree of accuracy

Technical support for site technical issue

Tasks and Responsibilities

• Familiar with the Marine and offshore engineering process
• Review and develop the Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities
• Prepare the engineering drawings of each system( Single line diagram/ equipment layout/ termination drawing)
• Plan the cable routing and build the 3D modeling
• Prepare the Cable cutting List/ Schedule
• Provide technical support for site arises technical issue
• As Section Project Lead in charge electrical design activities
• Review and advise the project’s design mode & standard
• Familiar with principal of the product and relevant standard
• Review and approve vendor submission documents
• Report the project daily discipline (Man-hour/Schedule etc.)
• Feedback for profession’s design mode & standard
• Study & Solve the project issues under Electrical responsibility
• Attend and report in project and section meeting
• Coordinate with Shipyard / Consultant / Vendor / Class / Owner
• Project Handling- New building project, Repair, Upgrading, Conversion projects

Job Requirement

• Minimum 5-8 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Familiar on Power and Automation system/ Navigation system.
• Familiar with Rules and Regulation and Statutory Requirements.
• Familiar with AutoCAD/ MS Office/ AVEVA.

Production Engineer
Mechnical Engineer (Building construction)

Permanent, Full Time, Island Wide

Executive

2 years - 5 years exp

$3000 to $5,000 Monthly

Roles & Responsibilities

We are looking for someone who are have Building and Construction knowledge in Steel Structural works.

Job Descriptions:

· Monitor and Handle product quality, budget, product knowledge, and arrangement for site delivery and site matters.

· Handle and Instructs employees on machine operation, safety and company policies.

· Inspect Inputs/outputs to check for QC/materials. PO from established quality standards.

· Coordinates workflow, processes, and machineries.

· Research or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.

· Monitor team and work procedures to meet production schedules, as well as general administrative works.

· Provide direction for projects tasks and hold all team members accountable for safety, quality and production

· Conduct daily briefing with crew to review production goals and performance feedback

· 5.5 days of work week

Qualifications and Requirements:

· Minimum of 2 - 5 years’ experience as a production engineer in construction and Steel of Structural, White Aluminum, or having related safety certificate and etc.

· In-depth knowledge of extrusion procedures, equipment and WSH guidelines.

· Able to read and understand the AutoCAD and 3D drawings.

· Problem-solving skills.

· Responsivity and Mature

· Truthful and Honesty

· Observant and alias the project, dateline, and follow instructions by the production Supervisors and follow closely and with the administration work.

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Responsibilities:

• Serves customers by identifying their needs and engineering adaptations of products, equipment, and services.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Identifies current and future customer service requirements by establishing personal rapport with potential and actual customers in a position to understand service requirements.
• Provides product, service, or equipment technical and engineering information by answering questions and requests.
• Establishes new accounts and services accounts by identifying potential customers and planning and organizing sales call schedule.
• Prepares cost estimates by studying all related customer documents, consulting with engineers, architects, and other professional personnel.
• Determines improvements by analysing cost-benefit ratios of equipment, supplies, or service applications in customer environment and engineering or proposing changes in equipment, processes, or use of materials or services.
• Gains customer acceptance by explaining or demonstrating cost reductions and operations improvements.
• Complies with local legal requirements by studying existing and new legislation, and anticipating future legislation.
• To ensure the maintenance programs and rectification jobs are managed by a team of technical officers and technicians efficiently.
• To ensure all works carried out safely and/or in accordance with safety procedures.
• Any other tasks assigned by leader.

Qualification:

- Minimum Diploma in engineering.

- Able to guide and troubleshoot ACMV faults.

- Good communication skills both verbal and written.

- SG Class 3 Driving License preferred.

- Familiarity with office software and phone systems.

- Has a good safety mindset and displays good WSH behaviour.

RESPONSIBILITIES:

• Manage site activities, vendors and sub-contractors
• Attend meeting, coordination, prepare works schedule & site supervision
• Supervise construction and civil works on site.
• Review project specifications, technical clarifications, and construction drawings
• Carry out works scheduling, material requisition, cost control, project supervision, and documentation
• Ensure timely and smooth progress of works
• Responsible for all aspects of site safety

REQUIREMENTS:

• Diploma/Degree in Civil Engineering
• Good communication & interpersonal skills
• Excellent project skills
• Good team player and adaptable to a dynamic environment

Responsibilities

Electrical system lead for electrical scope of works within a project.

• Ability to prepare overall electrical system concept
• Manage and prepare Request for Quotations (RFQs) and review specifications
• Ability to prepare electrical tender proposal for EPC tender
• Review technical proposals from OEMs to ensure compliance to our design requirement
• Plan and prepare an electrical Master document List
• Prepare manpower loading plan
• Review cable routing, BOQ, direct engineers, subcons and drafters

Ability to review and design of 230kV, 66kV, 6.6kV, and LV power supply system including:

1. Sizing of power generation systems, transformers, UPS, and DC systems
2. Electrical Single Line Diagrams
3. Power system Analysis by ETAP
4. Protection coordination
5. Cable Sizing
6. HV, MV and LV distribution system including Switchgear and MCC
7. UPS/DC system
8. Solar System
9. PMS
10. Electrical Room layout
11. Cable and Busduct Management System

​​​​​​​Familiar with the following systems and equipment

1. Steam/Gas turbine generator
2. EDG (Emergency diesel generator)
3. GCB/TCB/UCB
4. GSUT/UAT/AT transformers
5. MV/LV VSDs
6. IPBD/SBPD/LV Busduct
7. HV/MV/LV Switchgear and MCC
8. Civil interface for pull pit and penetration

Requirements

1. Bachelor’s degree in electrical engineering
2. At least 3 years of experience as electrical design engineer
3. Experience in electrical design is a must
4. Knowledge of EPC/M work processes as well as familiarity with the various project phases and the scope/deliverables
5. Strong organizational skills, technical knowledge of electrical systems in a process plant, leadership, strong computer skills, and time management.

Work location: Tuas Nexus

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hour: Monday - Friday (8:30am - 6pm)
• Location: Potong Pasir MRT

Job Scope:

• Install, modify, service, and upgrade equipment by maintenance and service agreements and technical specifications
• Perform regular maintenance, preventive, and corrective maintenance on customer equipment to maintain equipment reliability
• Maintain accurate service records, monitor the performance of equipment, and notify senior engineers of recurring problems
• Understand and practice factory diagnosis and preventive maintenance activities
• Understand solution items and make proposals to customers
• Perform other related ad-hoc tasks as assigned by management from time to time

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Summary

Ensures compliance with all government laws and regulations relating to environmental safety.

Develops and administers policies, procedures and training programs relating to hazardous, material handling and industrial safety. Also acts as a Radiation Safety Officer for the company.

Serves as point of contact for external agencies including emergency response personnel.

Hazardous waste – Develops, implements and monitors company environmental safety programs and policies to ensure compliance with federal, state and local environmental, health and safety regulations.

Key accountabilities

• Provide EHS information, reports and training
• Track and review EHS management Programs
• Support EHS committees and lead EHS internal audits
• Act as Radiation Safety Officer for Singapore site
• Monitor and update all company licenses/permits
• Monitor and work with respective departments on license/permit renewals
• Plan and conduct training to Shopfloor employees on EHS related documents on a regular basis at least once a year
• Ensure company’s compliance with legal requirements
• Drive EHS activities, ensuring compliance with Corporate EHS requirements
• Conduct monthly EHS inspections together with EHS committee members
• Promote safety and health by conducting in-house safety / health campaigns
• Monitor industrial hygiene programs, conduct hazard analysis of hazardous substances and evaluate hazard control methods
• Ensure company complies with the ISO14001 and ISO45001 Management Systems requirements
• Work closely with contractors, vendors and internal customers to resolve safety, environmental and health issues

Requirements

• Degree / Diploma in Environmental Engineering or other engineering discipline with a minimum of 2 years of experience in EHS Management and Facilities Systems
• Registered Safety Officer with MOM
• Experience in handling radioactive materials preferred
• Strong analytical and interpersonal skills
• Ability to manage multiple and complex tasks in a fast paced environment
• Proficient in Microsoft business applications

• No quota for work pass sponsorship,
• 5 Days week
• Location: Macpherson
• Salary: Up to $2800 (depend on experience)
• Industry : Design and Sales of factory automation products made using aluminum frame.

Requirements & Responsibilities

• ITE/ Dip in Mechanical Engineering with hands-on experience in using AutoCAD & SolidWorks software.
• Applicant must be willing to learn and work as a team.
• Able to work independently with minimal supervision.
• Other ad hoc duties as assigned

To Apply >>

Please attach updated detail resume in MS WORD FORMAT (.doc file) with the following information:

1. Personal Particulars
2. Education
3. Work experiences (period of employment & job duty) in point forms
4. Last drawn salary in each employment

5. Expected salary
6. Reasons for leaving each employment
7. Earliest work commencement date / Notice period

(We regret that only shortlisted candidates will be notified)

Overview:

We are seeking a knowledgeable and passionate individual to join our team as an Industrial Control System (PLC) Instructor (part-time) This role will involve teaching and training individuals in the fields of electrical controls, Programmable Logic Controllers (PLCs), and industrial electricity. The ideal candidate will have a strong background in electrical engineering or a related field, along with practical experience in industrial settings.

Responsibilities:

• Develop and deliver comprehensive lesson plans and training materials covering topics such as electrical controls, PLC programming, motor controls, and industrial electricity.
• Provide guidance and support to students as they work through practical exercises and projects to reinforce learning objectives.
• Assess student progress through assignments, quizzes and mock tests, providing feedback to aid in their development.
• Stay updated on changes in regulations related to electrical controls and industrial electricity.
• Offer mentorship and guidance to students interested in pursuing careers in electrical engineering or related fields.
• Participate in professional development activities to enhance teaching skills and knowledge of relevant subject matter.

Qualifications:

• Relevant degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic).
• Undergraduates / Fresh graduates in local Universities of Singapore are welcome to apply.
• Experience with working with electrical controls, PLCs, and industrial electricity in a professional setting is an added advantage.
• Knowledge of equipment and tools commonly found in industrial settings.
• Familiar with PLC programming and experience with PLC hardware and software
• Knowledge of developing instructional materials and delivering training sessions to diverse audiences is preferred.
• Knowledge of relevant industry standards and safety regulations governing electrical systems and industrial equipment.
• Patience, enthusiasm, and a genuine passion for teaching and helping others succeed in their educational and career goals.
• Training will be provided.

Working Hours:

• 3 - 6 Hours per week.
• Weekday evenings or weekends.

Location:

• 5 minutes walk from Jurong East MRT

Interested candidates please submit your resume through: [email protected]

Job Descriptions:

• Lead the Mechanical team to ensure that industrial machinery and equipment runs smoothly and reliably.
• Lead on improvements Projects and ensure oversee on task execution to completion.
• Creating maintenance procedures and Work Instruction.
• Managing stocks of supplies and equipment.
• Keeping records and pull data of faults and repairs history from SAP and prepare analyzation report for reliability action.
• Any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Strong mechanical background and basic electrical knowledge.
• Have at least 5 working years’ experience in a process plant with maintenance experience.
• Minimum diploma in mechanical.
• Autonomous, good communication skills, team player, high organizational skills and analytical.
• Proficient in Ms Office

AMT Pte Ltd is seeking an Industrial Automation Engineer to manage the following scope:

• In-House Automation Systems and Control

Scope:

Design / Development & Implementation

• System Design

Design and develop control systems and automation solutions using PLCs for various applications, including but not limited to manufacturing processes, material handling, and machinery control.

• Programming and Configuration

Write, test, and debug PLC software programs to meet the specific needs of an automation project.

• Simulation and Testing

Create simulations to test PLC program logic and system designs before deployment to ensure they meet the required specifications and performance criteria.

• Installation and Commissioning

Oversee the installation of automation systems and perform commissioning activities to ensure that they operate correctly and meet project and safety requirements.

• Documentation

Prepare and maintain accurate project documentation, including system designs, specifications, and operational manuals.

• Troubleshooting and Repair

Diagnose and rectify issues with PLC systems and automation equipment, sound problems-solving skills.

• Collaboration with Cross-Functional Teams

Work closely with the Mechanical Design Engineers to ensure that automation systems meet the needs of all stakeholders.

• Vendor Liaison

Coordinate with equipment suppliers and vendors for the procurement of system components, technical support, and warranty services.

• Training and Support

Provide training and technical support to end-users and maintenance teams, ensuring they understand how to operate and maintain the automation systems effectively.

• Safety Standards Compliance

Ensure all the automation solutions comply with all the relevant safety standards and regulations.

Requirement

1. Degree/Diploma in Electrical/ Electronics/ Automation / Mechatronics
2. 3 or more years working experience in PLC Control Program design and implementation in industrial automation.
3. Proficient in Keyence PLC / ABB Robots is an added advantage.
4. IT knowledge for Server/Client and Infrastructure
5. Electrical, instrumentations and control knowledge
6. Evidence of independent and can-do attitude

Summary

The Senior Systems Test Engineer for Value Engineering is responsible for evaluation of value engineering efforts on current products and achieving strategic quality goals following the launch of new developments (NPIs) and existing products. Key responsibilities will include working with the team to drive business stakeholders’ priorities participating in plans to successfully support all active products in the areas of cost reduction, supply chain support, and participate in design for in-sourcing projects. with key technologies.

Key accountabilities

• Primarily responsible for providing evaluation results (verification and validation), to ensure proper performance, long-term stability, reliability, robustness, and customer-usability for Value Engineering projects on all PerkinElmer products (include Mass Spectroscopy, ICP OES and GC products). Log and track all defects, test results.

Requirements

• Bachelor of Science degree or equivalent required.
• 2-5 years analytical instrumentation experience.
• Statistical analysis capabilities a plus.
• Excellent verbal and written communication skills; requires interaction with managers, supervisors, engineers in a fast-paced environment.
• Demonstrated ability to succeed in a fast-paced environment, working on multiple projects with constantly changing priorities and deadlines.
• Self-starter with the ability to prioritize, multi-task, and take ownership of projects, performing job requirements with minimal oversight and attention to detail.
• Positive attitude, high energy and troubleshooting skills
• Fully responsible for significant/challenging deliverables keeping management informed of progress and strategy.

Job Description:-

• Answer incoming phone calls, handle emails and enquiries
• Interpersonal skills with good command of English and Mandarin languages
• Work independently with minimal supervision
• Team player to function effectively within the team
• Organized and able to multi-task
• Possess initiative and highly resourceful
• Proficient in MS Office and Excel

Requirement:-

• ITE, NITEC, O' levels with at least 1 years related working experience

POSITION SUMMARY

1. Responsible for the overall operations of the Laboratory.
2. Works independently, receiving direction from manager and/or higher level employee(s)

CORE RESPONSIBILITIES AND TASK

1. Compile and maintain records such as time, date, type, quantity, quality, source and destination of water samples collected from customers.

2. Perform water analysis in the laboratory for both internal and external customers and generate the resultant water analysis report.

3. Evaluate water analysis results CC to help determine root cause of customer’s complaints and provide recommendation to help resolve product / process issues.

4. Procure, exercise and maintain safe and secure inventory control and storage of chemicals, apparatus and analytical equipment in the laboratory.

5. Conduct bench and pilot scale treatability test or evaluation product performance.

6. Responsible to maintain lab and surrounding areas in a safe and good operating condition in accordance to factory regulations and environmental standards.

7. Support company’s ISO audit by providing proper documentation of the records, reports, and SOPs.

8. Preparation of chemicals for product sales

9. Assist in development of water and wastewater treatment solutions

10. Participate in Continuous Improvement activities i.e. 5S and LEAN 101 and Emergency Response Operation including fire drills.

POSITION REQUIREMENTS

• Relevant Chemical Engineering / Environmental Engineering / Chemistry Degree / Diploma
• specialized skill training/experience/certification for laboratory operation is preferred
• 2 - 3 years of successfully demonstrated experience in the area of responsibility
• Above requirement plus specialized skill training/certification
• Geographic Regions Supported: South East Asia
• Knowledge of water quality analysis such as TSS, TDS, COD, Turbidity, TOC, Ion Chromatography et.; knowledge of chemical handling and water treatment process; Knowledge of EHS requirements in the use storage of different types of materials and chemicals including hazardous chemicals in water treatment.
• Above requirement plus communication and basic computer skills. Interact with others requiring social skills, a straight forward exchange of information and the ability to understand and influence using data and logic.

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

1) Promote and propose chiller and equipment to consultants and contractors.

2) Resposible for developing long term customer relationships.

3) Building close business relationship with customers especially key accounts.

4) Maximizing account penetration and customers retention.

5) Identify potential opportunities and develop solutions with existing and new customers.

6) Update timely forecast.

7) Negotiates value, addresses resistance and close sales.

8) Differentiates and made company product as preferred supplier.

9) Ensure all works carried out in accordance with the specified quality and standard requirement.

Roles & Responsibilities :

• Architectural & structural planning.
• Study tender / construction drawing specification and contracts to understand project requirement.
• To co-ordinate with main-contractors, sub-contractors & consultants and document control such as monitoring of submission and approval status of drawing.
• Assist the Project Manager in project planning and to coordinate all works on site, progress work report weekly basis.
• Supervise architectural and structutal works to coordinate with sub-contractors and main-contractor and/or clients on architectural and structural matters and ensure on workmanship standards.
• Perform site inspection and ensure that the work are carried out based on the project specification and construction drawing
• Arrange for equipment maintenance and upgrading.
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel.
• Attend meeting with all parties related to site work.

Requirements:

• Candidate must possesses Degree or Diploma in Building / Certificate in Civil & Structural Engineering or related field Min of 2 year relevant working experience in doing A&A works.
• Good working attitude, self-motivated and able to work independently
• Must able to handle in-house workers and proper ordering of material.
• Required skill (s) : MS Excel, MS Word, MS Project, AutoCAD

Duties

• Design, development, building and qualifying of various lab instruments, the major focus on Sample Preparation equipment including our featured FastPrep family (homogenizer).
• Develop and fabricate test equipment in-line with test specifications under the direction and guidance of direct supervisor.
• Execute tests using test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise, weight etc.
• Collect and analyze test data/results, document results and outcomes.
• Support the design and fabrication/assembly of both working and visual prototype models.
• Analyze equipment failures and factory work stoppage problems and provide solutions.
• Fabricates, repairs, improves designs and constructs electro-mechanical equipment.
• Coordinate with external vendors effectively for fabrication and OTS parts procurement.
• Maintains detailed and up to date test data in laboratory notebook and active test logs.
• Support manufacturing ramp up, and design transfer during product development.

Requirement:

• Master's Degree and above in Electrical Engineering or Mechanical Engineering
• 5 years of hands-on Mechanical and Electrical experience.
• Possess broad base of knowledge with understanding and skills in the following areas: Electrical, Electronics, Fabrication, Tool Making, Machining.
• Must be proficient in the use of all hand tools including saws, drills, grinders and other tools.
• Able to operate test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise and weight.
• Can work from prints, sketches, written and verbal instructions.
• Reads wiring/electrical and piping schematics and engineering drawings.
• Electrical experience/training in use of and design of AC and DC circuits.
• Ability to use electrical test equipment and measuring tools necessary.
• Self-motivated, team player with excellent communication and problem solving skills.
• Experience and knowledge of the following areas preferred:

- Rapid Prototyping

- Testing and Design Controls

- Installation

- Design

RESPONSIBILITIES:

- Ability to interpret technical documents, part print specified notes, and geometric print to verify products compliance

- Perform Inspection task on products to verify that they meet defined quality standards

- Conduct inspection and test on all incoming materials from vendors and outgoing products for shipping to customer

- Perform visual inspection on part workmanship

- Use measuring device/machine to check product part dimension for conformance to specification

- Segregate quarantine non-conformance products and materials that fail to meet quality requirements.

- Input inspection result into detailed report format and performance record

REQUIREMENTS:

- Min. ITE/Diploma fresh graduates or any technical qualification in Precision Machining.

- At least 2-3 years of working experience in related field is required for this position.

- Self-motivated and good attitude toward superior instruction.

- Detail oriented & proven ability to achieve goals

-Comfortable to work at West area, Joo Koon.

Position : Quantity Surveyor

Roles and Responsibilities

· Enrol tender process

· Prepare tender documents

· Prepare profit and loss & final account for project.

· Negotiate and award subcontractors

· Attend project meetings ,tender interviews and inspections, report regularly on progress and monitor schedule

· Evaluate and certify subcontract claim and contractual payment

· Analysis and preparation of cost plan & estimate for tender and job order

· Review and prepare agreements for award to subcontractors and suppliers

· Assist in preparing built-up tender pricing during tender stage

· Plan and schedules works with reference to contractual schedules

· Coordinate instructions & monitor with sales team, production, and clients for job order & design specification, acceptance of work, progress of work, problem solving, handover completed project with project documents, etc…

· Assist in preparation of project budget for management’s approval upon project award

·Ensure workplace is well-maintained, tidy & safe.

· Plan & implement effective, efficient production and safe practices.

· Attend site meetings

· Collaborate with team to propose design and materials based on budget and client requirement to obtain material dimension, design & specification from site .

Requirements

· Candidate must possess at least Diploma / Degree in Quantity Surveyor/Building or equivalent experience in Building Construction firm.

· Minimum (TWO) 2 years of relevant working experience in Quantity Surveying Works in building construction firm.

· Knowledge of structural will be beneficial.

· Familiar with Structural drawings to prepare for tender and job order.

· Highly motivated Responsible & team player with good interpersonal skill.

Job Description & Requirements:

• Degree in Mechanical Engineering.
• Good design and installation knowledge of mechanical airconditioning and mechanical ventilation in residential & commercial buildings.
• With strong leadership skill, ability to be agile, can adapt quickly to change and pivot, high level intiative, project management and communication skills.
• Able to work independently and under pressure.
• Minimum 6 years’ relevant working experience and proven track records in Singapore.
• Fluent in spoken English.
• Preferably with Class 3 driving license.

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants. Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Mechanical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 2 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

Description

We are searching for a reliable, deadline-driven Construction Supervisor to oversee construction crews at our company. The Construction Supervisor's responsibilities include recruiting new crew members, monitoring performance and making recommendations for improvement, as well as educating all staff on safety. You should ensure that projects stay within budget and that required materials and equipment are available.

To be successful as a Construction Supervisor, you should demonstrate a sound understanding of safety regulations and building codes and be able to transfer this knowledge to your team. Top-notch Construction Supervisors are leaders who can identify problems and find feasible solutions to them.

Responsibilities:

• Ensuring teams work together to deliver quality work to strict deadlines.
• Monitoring construction processes, and providing training and team building sessions are required.
• Ensuring adherence to health and safety regulations at all times.
• Performing equipment, material, and routine site inspections.
• Scheduling regular meetings with vendors, site inspectors, managers, and staff.
• Writing up reports, budgets, project plans, and presenting them to relevant stakeholders.
• Working closely with architects and other professionals.
• Staying up-to-date with safety codes and advancements in construction.
• Assisting with the recruitment and training of new staff.
• Processing paperwork and traveling to multiple sites as required.
• Finish the given sites on time without fail.
• Need to work anytime with the team under pressure.
• In the urgency of a project need to work on nighttime also without fail.
• Must have the ability to handle multiple works.
• Must maintain stocks in stores.

Requirements:

• Diploma.
• Experience in the construction industry required.
• Experience in a leadership role recommended.
• Valid driver's license.
• Excellent written and verbal communication skills.
• Ability to focus and keep calm under pressure.
• Ability to keep track of multiple projects.