Total 1,703 structural engineer job vacancies in Manufacturing / Production category in Singapore

• Perform ATE Test Program Design and Development for new products (Production and Characterization Test)
• Design and create Final Test Loadboard and Wafersort Probecard
• Manage Characterization Testing, prepare test specifications, define tests, conditions, criteria, etc.
• Responsible for test debugging, RMA analysis, and improving test solutions (HW and SW)

Requirements:

• Degree in Electrical/Electronic Engineering
• At least 3 years of ATE Test Program Development (C++/VB) experience with J750, UltraFlex, Advantest 93K, Advantest T2K test programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22111604

Key Responsibilities

• To establish standard flow / operating instructions for Product Engineering and Manufacturing process.
• Conduct Failure Mode Effectiveness Analysis (FMEA) where applicable
• Familiar with the operation of wafer sort test (Tester platforms/ Probers)
• Work and communicate with customers on New Product Introduction (NPI) and Coordinate device start up and transfer.
• Review and analyze wafer test yields, Hold Lot Disposition and resolve (debug) any associated issues impacting yield performance (Yield Improvement).
• Perform device / hardware test qualification / Correlation and the issuance of the associated reports
• Develop and conduct Design of Experiments (DOE) where applicable
• Support manufacturing operations (Line Support) on technical issues relating to device testing

Job Specification

• Diploma/Degree in Electrical & Electronic Engineering
• It will be an added advantage if you are familiar with all or any of the following:

1. Wafer sort test
2. Prober operations (TSK or OPUS)
3. Tester platforms (U-FLEX, J750, Verigy 93K, Magnum or Advantest Tester)

• Applicants must be able to converse in Mandarin to communicate with our Chinese counterparts
• Graduate with relevant industrial attachment will be considered

Recruit and select employees on the basis of merit (such as skills, experience or ability to perform the job), and regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

As a Manufacturing Services Engineer (MSE) for Fan Blade Singapore Facility, you will provide support to the Manufacturing Services Leader to ensure that the organization’s goals are delivered. You will be responsible for coordinating, at plant and cell level, for the Manufacturing Services organization’s service lines. Your task is to ensure that all aspects of external Service Provider partnerships are delivered and monitored in line with business requirements.

At Rolls-Royce, we look beyond tomorrow. We continually pioneer integrated power and propulsion solutions to deliver cleaner, safer and more competitive power.

We deliver the best jet engines in the world. Through intelligent innovation and active collaboration, we’re putting our customers at the forefront of the aviation industry – and we keep them there. Our product portfolio powers more than 35 types of commercial aircraft, and with over 13,000 engines in-service around the world: we’re keeping the world flying.

Key Accountabilities:

• Work closely with the designated in-charge to deliver the Manufacturing Services objectives.
• Coordinate designated aspects of external Service Provider partnerships delivered by Manufacturing Services, in line with business requirements and company standards.
• Provide data analysis and identifying opportunities to improve cell and machine performance
• Support implementation of the company Health & Safety Standards which may include taking the role of Responsible Person (RP) or Assistant RP for specified activities.
• Develop framework contracts and Service Level Agreements for external Service Providers
• Coach and lead maintenance activities for a team of technicians and plan/execute all aspects of manufacturing services activities.
• Expected to hold key secondary appointments in the Manufacturing Services lines such as:
• Take the lead for Fixture Care, developing the service to the business and ensuring that the Fixture Care service providers are monitored against agreed performance levels.
• Direct all aspects of the partnership with the Material Revert Service Provider at cell and plant level, measuring and monitoring performance against implemented Service Level Agreements.
• Develop and implement Energy Management plans, strategies and initiatives for Manufacturing Services at cell and plant level.
• Manage the Calibration requirements of the business and oversee the Calibration Service Provider monitoring performance against implemented Service Level Agreements.
• Administer the business requirements for Engineering Inspections.
• Interface with the Fluid Management Service Provider at cell and plant level ensuring that the required service levels are achieved.
• In conjunction with the business Risk Manager and Manufacturing Services Leader (MSL) and Had of Manufacturing Services (HoMS), manage the Property Risk improvement plans.
• Liaise with other MSEs within the company, in order to deliver objectives and goals across the whole of Manufacturing Services.
• Effective utilization of predictive and other non-destructive testing methodologies designed to proactively identify and isolate inherent reliability problems to prevent unplanned equipment breakdowns.
• Effective application of data analysis techniques such as Statistical Process Control (SPC), Reliability modelling and prediction, root cause analysis (RCA), failure reporting, analysis and corrective action system (FRACAS).
• System administrator for Maximo, Gage In site & Statutory Inspection Database with all manufacturing equipment records and maintenance activities.

Education and Experience:

• Bachelor’s Degree in Electrical/Mechanical/Mechatronics/Aerospace Engineering.
• Working experience with proven track records in asset management and reliability maintenance.
• Personnel handling and management skills with experiences in managing continuous improvement projects.
• Systematic problem-solving skills relating to handling of equipment troubleshooting and operational support issues and customer/ vendor relationships. Excellent interpersonal, communication and facilitation skills are a must.
• Must be conversant with industry regulations, best practices and maintenance management fundamentals such as Total Productive Maintenance (TPM) and Reliability Centered Maintenance (RCM). Knowledge of Maximo system.
• Qualifications in project management lean six sigma or any other relevant certifications will be advantageous.

We offer excellent opportunities to develop, along with a competitive salary and exceptional benefits.

Pioneer optimum performance. Join us and you’ll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation.

Our People are our Power

We are an equal opportunities employer. We’re committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we’ll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realise their full potential. You can learn more about our global Inclusion strategy here.

So that you can be your best at work and home, we’ll consider flexible working arrangements for everyone, in any role.

Rolls-Royce follows a merit-based employee recruitment process and does not charge/accept any payment/security deposit from candidates during the recruitment process. Candidates seeking employment with Rolls-Royce should be cautious of potentially fraudulent communications and offers from individuals and agencies purporting to be from, or acting on behalf of, Rolls-Royce.

Please refer to the Career section on the Rolls-Royce website to verify employment offers or vacancies. Rolls-Royce shall not be liable for any loss, damage or consequences that may arise from any communication or offer of employment not directly made by Rolls-Royce.

Rolls-Royce reserves the right to take legal action against any individuals or agencies acting on behalf of Rolls-Royce without authorisation.

Your Role

We are looking for an Associate Production Engineer to work on electronic, electo-mechanical and etc.

What Will You Do

• To work on electronic, electro-mechanical, pneumatic, mechanical or measurement product assembly operations on product components, assemblies, and sub-assemblies
• To do analysis and interpretation on mechanical drawings and electrical schematics.
• Responsible for implementation of production processes and procedures.
• To perform utilization of work orders, schematics, wiring diagrams, engineering specifications, parts and wire lists, and written or verbal instructions to build, repair or test on the electronics or components.
• To provide maintenance by troubleshooting, repairing, and testing the machine.
• Ensure that all safety standards have been maintained for a safe and clean working environment.

What Do We Want

• At least a Diploma or Bachelor’s Degree in Engineering or Science related fields.
• At least 2 years of working experience in assembling high precision electro-mechanical products and systems.
• Have experience in semi-conductor industry will be added advantage.
• Have strong problem-solving skills and hands-on experience.

Our client is a Global Manufacturing MNC. Due to their current expansion plan, they are looking for a Staff Engineer, Optics to join their team, in hopes of developing the current high performing team. They are located in the North.

Job Responsibilities:

• Develop, implement, and optimize manufacturing and metrology processes for organisation efficiency and capability enhancement.
• Procure and optimize new manufacturing and metrology equipment.
• Lead projects to improve organisation’s manufacturing and metrology capabilities, identifying risks and implementing solutions.
• Provide support during pilot and production phases, including training and issue resolution.
• Supervise department engineers, guiding them in continuous improvement projects.
• Manage non-standard RFQs, advising on resource allocation and exceptions.
• Collaborate with internal teams and customers to align expectations and develop solutions.
• Coordinate with Operational Excellence initiatives for continuous improvement alignment.
• Support engineers and technicians in resolving manufacturing issues and improving quality.
• Participate in training and contribute to relevant publications.
• Any other duties as assigned.

Requirements:

• Minimum Bachelor or Master in Engineering relevant equivalent field of study.
• Minimum 8 years relevant experience in process engineering

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Responsibilities:

• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Provide improvements ideas and work within the group to further improve the equipment performance.
• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Ensure minimum downtime, quick response to trouble -shoot, rectify return to production.

Requirements:

• Min Diploma in any Engineering field
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis
• Able to work in a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Plan, coordinate, and oversee production activities to ensure smooth and efficient operations.
• Monitor production performance to meet quality, cost, and delivery targets.
• Troubleshoot and resolve production issues, working closely with cross-functional teams.
• Implement and improve production processes to optimize efficiency and productivity.
• Ensure compliance with safety and quality standards.
• Train and mentor production operators to enhance their skills and knowledge.
• Manage and maintain production equipment and ensure their proper functioning.
• Prepare production reports and documentation.
• Collaborate with other departments to drive continuous improvement and meet customer requirements.

Requirements:

• Bachelor's degree in Engineering or a related field.
• Prior experience in a production engineering role, preferably in the semiconductor industry.
• Strong knowledge of production processes and equipment.
• Excellent problem-solving and troubleshooting skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is a Global Manufacturing MNC. Due to their current expansion plan, they are looking for a Staff Engineer, Optics to join their team, in hopes of developing the current high performing team. They are located in the North.

Job Responsibilities:

• Develop, implement, and optimize manufacturing and metrology processes for organisation efficiency and capability enhancement.
• Procure and optimize new manufacturing and metrology equipment.
• Lead projects to improve organisation’s manufacturing and metrology capabilities, identifying risks and implementing solutions.
• Provide support during pilot and production phases, including training and issue resolution.
• Supervise department engineers, guiding them in continuous improvement projects.
• Manage non-standard RFQs, advising on resource allocation and exceptions.
• Collaborate with internal teams and customers to align expectations and develop solutions.
• Coordinate with Operational Excellence initiatives for continuous improvement alignment.
• Support engineers and technicians in resolving manufacturing issues and improving quality.
• Participate in training and contribute to relevant publications.
• Any other duties as assigned.

Requirements:

• Minimum Bachelor or Master in Engineering relevant equivalent field of study.
• Minimum 8 years relevant experience in process engineering

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Functional Area

PPC is responsible for all planning activities related to airframe maintenance projects at FSA. Main activities are preparation of the work packages, provision of direct support to the production area, master scheduling, manpower planning and working with the commercial department on accurate forecasting.

Role Purpose

The Production Planning Engineer role is key for completion of each airframe maintenance project. Within this role you are directly supporting the production team and enabling them to efficiently perform their work according to our and various national quality standards.

The Production Planning Engineer is a key point of contact for our customers and ensures provision of accurate and frequent information to FSA’s customers in a timely matter.

As a Production Planning Engineer, you will also work in close collaboration with the engineers, sales force as well as the daily operational management team.

As a result, you are a core contributor to the effective and efficient completion of each heavy maintenance check.

Key Accountabilities & Responsibilities

As a Production Planning Engineer, you will be responsible for the planning activities before and during a heavy maintenance check. These responsibilities are, but not limited to:

• Generation of material request in our ERP system
• Analysing the projects outstanding work and providing project status reports
• Monitoring and controlling the task card flow, both the physical as well as the digital flow
• Handling outside service requests
• Composition and control of project plans
• Preparation of final reports
• Liaison with technical support departments of the OEMs
• Facilitation of daily progress meetings
• Attend meetings with customer to provide latest project update
• Work and support production department continuously on requirement of additional material and other project information
• Participation in lean projects
• Responding on customer requests
• Coordination of aircraft parts robbing process
• Correctly archiving of the project documentation

Key Skills, Knowledge, Experience and Competencies

• Minimum of 2 years’ experience working in an airframe maintenance environment
• Experience in base maintenance is preferred
• Minimum of 2 years’ experience in production planning
• Solid computer skills
• Able to read technical drawings
• Strong verbal and written communication skills
• Proven analytical skills, including data analysis interpretation
• The ability to define and implement actionable plans
• Team player and strong interpersonal skills
• Enthusiastic, assertive, and proactive personality

At FLEXXON, we foster a culture of innovation, creativity, and inclusivity. You'll have the opportunity to work alongside talented individuals who are passionate about making a difference. We offer a dynamic and supportive work environment that encourages professional growth and recognizes your achievements.

If you are excited about the prospect of taking on new challenges, making an impact, and contributing to the success of our products, we would love to hear from you.

Responsibilities:

• Present product and solution in response to customer enquiries and problems
• Market research, analysis and competition to formulate product strategy
• Design and manage product communications including external and internal feature announcements, use case, reference materials and press releases
• Manage storage products, and responsible for the whole process from demand, spec, design, development, testing to mass production
• Analyze, troubleshoot and resolve issues.
• Work with R&D and other cross-functional counterparts to drive development of advanced features and technology

• Degree/Diploma in Electronics Engineering, Computer Engineering, Microelectronics or related major
• Good presentation and communication skills, excellent in written and spoken English and Chinese
• 3-5 years of product or project management experience
• Familiar with Windows and Linux operating system preferably, if have
• Ability to work independently and as a team, with strong analytical and multitasking skills

• To analyse user requirements and design, develop, implement and maintain computer applications to support and assist users to meet their business objectives more effectively and efficiently.
• Develop, support and enhance the Data Download Centre (including Engineering Portal) and iSCM websites.
• Develop, support and enhance Excel productivity enhancement tools (VBA macros).
• Support end-users in usage of Plasma and ACCPAC and help to resolve any operational issues, including working together with vendor (Databit) if necessary.
• Develop and enhance data extraction and transformation mechanisms on source systems (e.g. Plasma, YEOS, NYQT, Oracle BI, SAP RFC, PTS etc.) and store the results into Plasma Info Server Monitor the space consumption of Plasma Info so that Server database so that potential problems (e.g. disproportionate consumption of disk space by a particular table, depletion of data tablespace, excessive consumption of temp tablespace) are detected and resolved early to avoid unscheduled database downtime.
• Perform ad-hoc retrieval of order/production/sales data to support incident investigation, reporting or other requests.
• Support Migration Activities of Existing Plasma Info Server to SAP.
• Support & ensure successful implementation of Company-wide Automation (ERP) Projects.

Requirements:

• Degree in Info Systems/Computer Science or its equivalent
• Prefer 2-3 years relevant experience in Manufacturing Industry.
• Entry level are welcome to appy as training will be provided.

Knowledge:

SQL; Oracle PL/SQL; MS SQL Server Transact-SQL

Object-oriented analysis and design

ASP.NET 4.5.1; C/C++/C#; XML

JavaScript; JQuery; CSS; HTML

Excel VBA; VBScript; PowerShell

PHP, VS.Net, MSOffice

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize additive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for laser-related processes.
• Lead and own laser blown powder deposition activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on laser cladding (solid state lasers and blown powder laser) and metallurgical characterization
• Understanding of common component repair processes (welding, heat treatment, machining, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Experience in beam characterization using commerically available equipment
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

T & C Manufacturing Co. Pte Ltd is looking for Manufacturing Engineer/ Assistant Engineer to Join the Technical Team.

The Incumbent must have a minimum of one year working knowledge in machinery, building, automation PLC maintenance in food process industry.

His main responsibilities include inspecting and monitoring of all equipments periodically in the factory. Ensuring spare parts availability, trouble shooting and execute preventive maintenance plan and perform repair work. He is to manage/ supervise contractors on work schedule and safety adherence in workplace. He will be part of the WSH team in handling workplace safety issues and assist in the renewal of electrical license and waste water treatment plant in compliance with the HACCP/FSSC program.

He will assist HOD on any adhoc duties as assigned.

Job Description will be shared to candidate during the physical interview.

Responsibilities:

• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Provide improvements ideas and work within the group to further improve the equipment performance.
• Report and compilation of daily maintenance and other activities of assigned station, as well as write troubleshooting reporting pertaining to a machine down time.
• Ensure minimum downtime, quick response to trouble -shoot, rectify return to production.

Requirements:

• Min Diploma in any Engineering field
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis
• Able to work in a team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Manage the acquisition, delivery and commissioning of capital equipment, turnkey solutions and ancillary fixtures/ tooling
• Industrialize adaptive manufacturing capability through the development of new process and procedures
• Manage the transfer of new products and know-hows from pre-production site to manufacturing site for mass production. Successful candidate will be expected to be posted overseas for training and technology transfer
• Implement and deliver new repairs by designing and fabricating new repair fixtures/ tooling; developing process parameters; and validating repair setup through First Article Inspection
• Provide technical assistance to all functional departments to meet business objectives
• Effectively apply process control (SPC) to monitor, analyze and define errant processes; and to refine processes to reduce variability
• Function as on-site technical authority and liaise with technical specialists for CAM and non-contact measurement related repair processes.
• Lead and own CAM and non-contact measurement activities
• Any other duties as assigned by supervisor

Requirements

• Bachelor's Degree in Manufacturing, Material Science, Mechanical Engineering or related field
• Possess knowledge (theory and practical) on digital manufacturing and conventional machining
• Experience in operating non-contact measurement equipment and Siemens NX multi-axis manufacturing module
• Understanding of common component repair processes (welding, heat treatment, NDT) and familiarity with digital manufacturing and/or proficiency in CNC programming is an advantage
• Ability to read and understand manufacturing drawings and GD&T
• Able to multi-task and work well under pressure as an individual/ team
• Possess good communication, analytical , engineering and project management skills
• Good technical problem solving skills, takes ownership and hands-on approach

Responsibilities:

• Plan, coordinate, and oversee production activities to ensure smooth and efficient operations.
• Monitor production performance to meet quality, cost, and delivery targets.
• Troubleshoot and resolve production issues, working closely with cross-functional teams.
• Implement and improve production processes to optimize efficiency and productivity.
• Ensure compliance with safety and quality standards.
• Train and mentor production operators to enhance their skills and knowledge.
• Manage and maintain production equipment and ensure their proper functioning.
• Prepare production reports and documentation.
• Collaborate with other departments to drive continuous improvement and meet customer requirements.

Requirements:

• Bachelor's degree in Engineering or a related field.
• Prior experience in a production engineering role, preferably in the semiconductor industry.
• Strong knowledge of production processes and equipment.
• Excellent problem-solving and troubleshooting skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Lead and supervise a team of manufacturing operators to ensure smooth and efficient production operations.
• Monitor production schedules and targets, and take corrective actions as needed to meet customer requirements.
• Train new employees on safety procedures, equipment operation, and manufacturing processes.
• Develop and implement standard operating procedures (SOPs) to ensure consistent quality and productivity.
• Coordinate with other departments to ensure timely availability of materials and resources for production.
• Perform regular inspections to ensure adherence to quality standards and identify areas for improvement.
• Effectively communicate with team members, management, and cross-functional teams to address any issues and drive continuous improvement.
• Ensure compliancecompliance with company policies, safety regulations, and industry standards

Requirements:

•  Diploma or Degree in Engineering or related field.
•  With 2 years of experience in the wafer fab/ semiconductor industry.
•  Prior experience in a leadership or team lead role.
•  Ability to lead and motivate a team in a fast-paced environment.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

HE ROLE:

Our team is looking for a Product Engineering Architect at PMTS level to lead new Data Center GPU product scoping and early engagement for Product Development Engineering.

THE PERSON:

• Effective people skills to lead and drive progress across organizational levels and functions.
• Ability to operate autonomously through ambiguity and constantly drive for excellence.

KEY RESPONSIBILITIES:

• Primary contact point from Product Development Engineering Group for new product scoping and roadmap definition in concept, feasibility and planning phase
• Leading the product scoping process for product development engineering through concept, feasibility and planning phase across schedule, budget, head count, cost, yield and quality attainment plan
• Collaborating with cross-functional technical teams including design, software, platform, test engineering, product engineering, advanced packaging, foundry technology, hardware infrastructure to assess testability and provide viable productization solutions for new products, new features and new IPs
• Evaluating new technologies and their potential integration into AMD’s product portfolio
• Providing technical leadership and guidance throughout the product lifecycle, from initial scoping to deployment and support
• Managing a team of technical domain experts and program manager for new product scoping and early engagement

PREFERRED EXPERIENCE:

• Great depth and breadth of capability and skillsets, including DFT, test engineering, product engineering and technical program management.
• Solid understanding of Data Center GPU product knowledge, Server system knowledge and practical volume production management experience.
• At least 15+ years of experience in semiconductor, high performance computing industry.

ACADEMIC CREDENTIALS:

• Bachelor, Master or PHD in computer engineering/Electrical Engineering

LOCATION:

Singapore

Responsibilities:

• Assist the manufacturing supervisor in overseeing the daily operations of the production.
• Monitor and ensure compliance with quality and safety standards.
• Train and guide manufacturing operators on standard operating procedures and best practices.
• Coordinate with other departments to ensure smooth workflow and timely production.
• Assist in troubleshooting and resolving production issues in a timely manner.
• Conduct regular inspections and audits to identify areas for improvement.
• Prepare and maintain production reports and records.
• Assist in scheduling and planning production activities to meet customer requirements.
• Support continuous improvement initiatives to optimize productivity and efficiency.

Requirements:

• Min Diploma in Material Science / Chemical / Electrical/Mechanical Engineering or equivalent.
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis and DOE.
• Able to handle a team of a team of operators, technicians

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Assist the manufacturing supervisor in overseeing the daily operations of the production.
• Monitor and ensure compliance with quality and safety standards.
• Train and guide manufacturing operators on standard operating procedures and best practices.
• Coordinate with other departments to ensure smooth workflow and timely production.
• Assist in troubleshooting and resolving production issues in a timely manner.
• Conduct regular inspections and audits to identify areas for improvement.
• Prepare and maintain production reports and records.
• Assist in scheduling and planning production activities to meet customer requirements.
• Support continuous improvement initiatives to optimize productivity and efficiency.

Requirements:

• Min Diploma in Material Science / Chemical / Electrical/Mechanical Engineering or equivalent.
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis and DOE.
• Able to handle a team of a team of operators, technicians

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Lead and supervise a team of manufacturing operators to ensure smooth and efficient production operations.
• Monitor production schedules and targets, and take corrective actions as needed to meet customer requirements.
• Train new employees on safety procedures, equipment operation, and manufacturing processes.
• Develop and implement standard operating procedures (SOPs) to ensure consistent quality and productivity.
• Coordinate with other departments to ensure timely availability of materials and resources for production.
• Perform regular inspections to ensure adherence to quality standards and identify areas for improvement.
• Effectively communicate with team members, management, and cross-functional teams to address any issues and drive continuous improvement.
• Ensure compliancecompliance with company policies, safety regulations, and industry standards

Requirements:

•  Diploma or Degree in Engineering or related field.
•  With 2 years of experience in the wafer fab/ semiconductor industry.
•  Prior experience in a leadership or team lead role.
•  Ability to lead and motivate a team in a fast-paced environment.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose your personal information for purpose in connection with the services

provided by us.

Duties and Responsibilities

• Manage production line to meet output goals
• Perform treatment of products per work order instructions
• Perform in-process quality inspection
• Check work order instructions
• Basic recording of processed orders
• Maintain 5s of working area

Experience/ Others

• Experience in manufacturing environment
• Physically fit to carry 5-10kg

Benefits

• OT opportunities
• Variable bonus and production incentives

Responsibilities

• Participate in new product development project from concept to launch
• Support and improve existing product lines
• Support activities to reduce production cost, lead-time and improve product reliability and quality
• Collaborate with external partners in joint product development projects
• Manage project scope, timelines, budgets, product specifications, production schedules, and any other deliverables
• Establish engineering specifications and production processes to meet technical, functional and quality requirements
• Coordinate and support manufacturing of prototypes and products to ensure reliability and quality of product
• Develop and perform assembly and test procedures for product according to specifications
• Identify and resolve all issues effectively to achieve all objectives
• Ensure proper documentation (including manuals) of all required information for product/projects
• Support product installations and any necessary diagnoses, troubleshooting, service, and repair
• Provide product training and support internally and distributors

Requirements

• Bachelor’s degree in Electronics, Electrical or System related Engineering
• 3-5 years relevant experience in product development
• Familiar with programming languages C and C++

Interested applicants, please click "Apply Now" or forward a detailed resume as MS Word format / PDF and email to [email protected].

Tempserv Pte Ltd

EA License No: 06C3745

Daniel Lee / EA Registration No: R1989151

Responsibilities:

• Plan, coordinate, and oversee production activities to ensure smooth and efficient operations.
• Monitor production performance to meet quality, cost, and delivery targets.
• Troubleshoot and resolve production issues, working closely with cross-functional teams.
• Implement and improve production processes to optimize efficiency and productivity.
• Ensure compliance with safety and quality standards.
• Train and mentor production operators to enhance their skills and knowledge.
• Manage and maintain production equipment and ensure their proper functioning.
• Prepare production reports and documentation.
• Collaborate with other departments to drive continuous improvement and meet customer requirements.

Requirements:

• Bachelor's degree in Engineering or a related field.
• Prior experience in a production engineering role, preferably in the semiconductor industry.
• Strong knowledge of production processes and equipment.
• Excellent problem-solving and troubleshooting skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305
Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Assist the manufacturing supervisor in overseeing the daily operations of the production.
• Monitor and ensure compliance with quality and safety standards.
• Train and guide manufacturing operators on standard operating procedures and best practices.
• Coordinate with other departments to ensure smooth workflow and timely production.
• Assist in troubleshooting and resolving production issues in a timely manner.
• Conduct regular inspections and audits to identify areas for improvement.
• Prepare and maintain production reports and records.
• Assist in scheduling and planning production activities to meet customer requirements.
• Support continuous improvement initiatives to optimize productivity and efficiency.

Requirements:

• Min Diploma in Material Science / Chemical / Electrical/Mechanical Engineering or equivalent.
• Relevant working experiences in wafer fab / semiconductor industry
• Good technical skills including problem-solving, statistical data analysis and DOE.
• Able to handle a team of a team of operators, technicians

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.