Total 6,458 system technician job vacancies in Maintenance / Repair category in Singapore

Technician (RF Testing) (contract)

Job Description:
• Involvement in Production testing scope.
• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing
• Perform duties with minimal supervision
• Integrates continuous improvement concepts and techniques into work
• Performs other duties as assigned
• Set up and run HASS to qualify the modules under testing conditions.
• Conduct a Functional Acceptance Test to complete the module test process.
• Maintaining the operations of the ATE stations
• To generate test reports
• Integrates continuous improvement concepts and techniques into work
• Performs other duties as assigned

Job Requirement:
• Open to shift work
• Competent handling of miniature with tweezers
• Ability to handle and solder components using a microscope
• Ability to produce consistent quality workmanship on repetitive manual processes
• Open to contract, renewable
• Location: Ang Mo Kio

Knowledge, Skills, Competencies

- Able to understand mechanical and electrical wiring diagram with some basic understanding of cable termination.
- Experience with network design and networking exposure will be added advantage
- Good knowledge with Operating platform such as Microsoft Windows and Linux
- Proficiency in operating measuring equipment or software such as network analyser, serial protocol analyzer and oscilloscope

ALATAS Crane Services Worldwide is a worldwide operating crane service specialist and offers crane related services and parts supply in the Ship-, Offshore-, and Construction industry.

With our global set-up of 14 offices worldwide, we offer field service, provide technical solutions for emergency repairs, large scale overhauls, load testing, inspections, component repairs, spare parts supply as well as supply of new cranes and upgrades to existing ones.

Our specialized Crane Service Engineers are professionals in their field and are available attend to crane problems throughout the world.

We also operate a repair workshop for hydraulic- & mechanical components, such as hydraulic pumps, motors, cylinders, gearboxes and other crane components.

To support our crane servicing department, we are employing experienced Workshop Technician as follows:

JOB DESCRIPTION:

• Assemble, dismantle, service & repair of Marine pumps and machinery parts
• Steel repairs on Grabs, Windlasses & other Deck Machinery Parts
• Afloat repairs on Deck Machinery & Cranes

REQUIREMENTS:

• NTC 3 (or higher) in Mechanical Engineering or equivalent
• Strong technical knowledge of at least 3 years of experience in the assemble, dismantle, service & repair of Marine pumps and machinery parts (is a must)
• Welding qualifications will be an added advantage
• Pro-active team player, with the right working attitude and willing to work overtime

• Service and repair work in the respective sites as assigned
• Carry out installation works to respective sites as assigned
• Maintain all tools and equipment issued in good condition
• When assigned to a vehicle, the person shall maintain the vehicle in good order and ensure that all fixtures aresufficient for services and works
• Maintain good response to call activation during and after office hours
• Provide quality service to customers
• As a frontline, report to the sJob Descriptions
• Service and repair work in the respective sites as assigned
• Carry out installation works to respective sites as assigned
• Maintain all tools and equipment issued in good condition
• When assigned to a vehicle, the person shall maintain the vehicle in good order and ensure that all fixtures aresufficient for services and works
• Maintain good response to call activation during and after office hours
• Provide quality service to customers
• As a frontline, report to the superior all incidents at site and update the superiors on any information or changesthat occur at site
• Ensure good safety practices

Job Requirements

• Able to read, write simple English
• Able to commence work immediate or within short notice will be an added advantage
• 5.5 days work weekuperior all incidents at site and update the superiors on any information or changesthat occur at site
• Ensure good safety practices

Facility Technician | Up to $2k | 6 Days | Tanjong Pagar

Monthly Salary: $2,000
Working Location: Tanjong Pagar
Working Days & Hours: 6 Days (7am-3pm / 3-11pm / 11pm-7am) rotate

Job Description

• Perform all repair and maintenance works on the Hotel's lighting, power heating, ventilation, air-conditioning, refrigeration, fire protection, kitchen, laundry and plumbing equipment.
• Check system or equipment for faults and follow up on the repair works if required.
• Monitor works carryout by contractors and ensure works are properly done, safe and secured.
• Carry out preventive maintenance work of properties.
• Ensure the fire and safety procedures are carried out at all times.

Job Requirements

• NITEC in Electrical / Mechanical or equivalent
• Able to work rotating shifts including weekends and public holidays

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

An exciting opportunity has arrived at The Garcha Group, Singapore’s boutique hotel group currently with the following hotels:

- Maxwell Reserve, Autograph Collection Hotel (Marriott);

- Duxton Reserve, Autograph Collection Hotel (Marriott);

- The Vagabond Club, a Tribute Portfolio Hotel (Marriott);

- The Serangoon Club, a Tribute Portfolio Hotel (Marriott).

Garcha Group Benefits:

- As an associate of a Marriott hotel, you, your parents or parents-in-laws, children, spouse/domestic partner and

siblings are eligible for discounts on F&B and room rates in 7,000+ hotels world-wide.

- As an associate of a Marriott hotel, you have access to the “Global Learning + Development” tool which creates for you personalized learning experiences designed to help you thrive in their Marriott career journey.

- Comprehensive Health Insurance Plan.

- 3 days 2 nights yearly staycation including all meals and beverage in any of the 4 Garcha Group hotels in

Singapore.

- 20% off Food & Beverage at all Marriott & Garcha Group restaurants and bars.

Job Description:

· Respond and attend to guest repair requests.

· Communicate with guests/customers to resolve maintenance issues.

· Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication.

· Visually inspect tools, equipment, or machines.

· Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings.

· Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.

· Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, energy conservation, and/or general building.

· Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough clean-up of the painting or repair area.

· Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items.

· Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work.

· Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers.

· Display basic computer skills including inputting air handler schedules and making temperature changes.

Technician

Salary: $2300 - $2800 + OT
Working Hours: 5.5 Days
Working Days: Mon - Fri (8.30 am -5.30 pm; Sat: 8.30 am -12.30 pm)
Working Location: Woodlands Industrial Park

RESPONSIBILITIES:

• Perform in-house or onsite repair or maintenance of warranty and non-warranty products to provide a fully functional unit that meets quality standards and applicable specifications for exchange stock or return to customer.
• Test and calibrate all repaired equipment as required to ensure original design specifications are met.
• Identify root cause and diagnose problems accurately and perform necessary corrective actions to resolve issues during service calls.
• Troubleshoot, diagnose problems of faulty equipment and evaluate failed units to ensure cost effectiveness of repair versus replacing defective components.
• Provide customers with quotes of time and material for repairs using Company's established guidelines for pricing.
• Prepare repair estimates & statements.
• Monitor schedules and work closely with customers to ensure accurate, correct and expeditious repairs are done on a timely basis.
• Repairs and maintenance are to be completed on schedule to specified standards and procedures.
• Coordinate with accounts / sales staff that customers are invoiced immediately.
• Work closely together with customer service, sales and related functions to resolve any technical issues / complaints expeditiously.
• Design modifications to equipment to compensate for component changes or non-availability of obsolete components.
• Maintain a clean and safe work environment using the correct tools properly.
• Perform all work in accordance with established safety procedures and standards.
• Upkeep, maintain, repair and calibrate tools and equipment used for work to optimal condition.
• Maintain records of all breakdowns and repair for analysis
• Keep track of the company’s inventory and update the inventory list accurately and promptly.
• Provide product feedback to management for continued quality improvement on products.

Requirement:

• Possess Nitec / Diploma in Electrical, Electronics, Mechanical Engineering or equivalent courses with relevant experience will be considered.
• 2 - 5 years of hands-on experience in the repair and maintenance of food processing equipment or industrial production machinery.
• Ability to read and understand basic wiring diagrams, mechanical drawings & floor plans.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

Purpose and Scope

• Able to perform corrective Instrumentation and Controls Maintenance for all Equipment located in Banyan CCP3 and BWWT as assigned by I&C Engineer / Supervisor.

Key Roles and Responsibilities

• Carry out inspections as per daily maintenance schedule; attend defects, breakdowns, including the repairing and calibration of Instrumentation and Controls Equipment.
• Conduct disassembling and assembling of Instrumentation and Controls Equipment and of Gas turbine, Steam Turbine, Generator, HRSG, BOP and BWWT for repairs/rehabilitation.
• Hands on maintenance and troubleshooting experience of ALSPA DCS control system, Field Instruments such as transmitters & gauges, electronic cards etc.
• Assist the Maintenance I&C Engineers to troubleshoot/ fault diagnosis/ failure analysis to determine cause of failure.
• Assist the Maintenance I&C Engineers to develop Risk Assessment and mitigation measures for every Maintenance job in the plant
• Apply for Permit to Work (PTW) as the Competent Person (CP) for every Maintenance work in the plant.
• Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities
• Withdraw and prepare spares from warehouse for job execution.
• Prepare daily updates on Maintenance activities for the day to all stakeholders (operations)
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

Qualification, Skills and Experience

• Min ITE or diploma in engineering field
• Preferably minimum 3 years of experience in relevant Maintenance fields in a Power Plant or Petrochemical Industry

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Maintenance Technician for the next phase of their business. They are located in West.

Duties:

• Perform preventive, predictive, and corrective maintenance tasks as directed, and update the CMMS database.
• Maintain rotating and static equipment, plant piping, and structural support systems.
• Respond to and resolve equipment malfunctions, ensuring minimal downtime.
• Determine necessary materials, tools, and methods for safe maintenance tasks.
• Conduct machinery condition monitoring and field data collection with the production team.
• Ensure operational efficiency of all plant valves and mechanical components, including control and plant valve maintenance.
• Supervise in-house contractors and vendors, ensuring safety protocols are followed.
• Collaborate with the production team on mechanical system testing and troubleshooting.
• Take on additional tasks or responsibilities as assigned.
• Perform valve line-up and LOTO for maintenance preparations.
• Participate in the Company's Emergency Response Team (CERT) with assigned roles.

Requirements

• Nitec in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in troubleshooting of mechanical/ machinery systems

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

You will be required to:

• Perform pre-flight operations and post-flight operations on all training devices and complete the necessary documentation.
• Perform all preventive maintenance works and corrective maintenance works on all training devices as assigned.
• Respond to customers' training needs in a courteous and timely manner to ensure that the required reliability and availability of all training devices are met consistently.
• Adhere to AST’s quality standards.
• Assist in diagnosis on all training devices to isolate mechanical or electrical faults and repair faulty components where possible.
• Assist in the modification and upgrading of simulators training devices and related system components, devices, hardware, and software.
• Assist in running Qualification Test Guides.
• Perform logistical/administrative duties as demanded, including updating of technical documentation or logistical information.
• Perform housekeeping functions to maintain the simulator, training devices and related components.
• Make spare parts requests, shipping and receiving of parts and components.
• Assist and participate in national aviation authorities’ evaluations.
• Perform task to support our team as required.

You would ideally possess:

• Diploma or University bachelor’s degree in an engineering field (Aviation, Electronics, Automation, Mechanical etc).
• 1 to 2 years of relevant experience.
• Ability to work in a dynamic environment on a 12 Hour rotating shift (Day/Night) roster.
• Ability to read technical drawings and schematics of electronics, electrical and mechanical systems.
• Analytical thinking, with a high level of responsibility and ownership.
• Ability to work independently as well as in a team and have a result-oriented mindset.
• Experience in using and repairing PLC, electronics and computer equipment is advantageous.
• Experience in working with simulators or a similar field is advantageous.
• Ability to commence work immediately or within short notice is preferred.
• Entry Level is welcomed.
• Able to work 12 hours shift.

Evervet Veterinary Clinic would like to expand our family of paraprofessionals and veterinarians!

We are a team of passionate individuals who strive to provide excellent care and service to our patients and clients.

Our clinic offers both general consultations and a wide range of surgeries. Do you think you have what it takes to be an outstanding Vet nurse?

As a Veterinary Nurse/ Technician, you would be expected to carry out the following duties including but not limited to:

• Handling and restraint of animals
• Surgical preparation and anesthetic monitoring
• Assist with surgical and dental procedures
• Some reception duties
• Triaging of emergency cases
• Care of hospitalized patients
• In-house laboratory/ diagnostic procedures
• General housekeeping

The ideal candidate should possess the following:

• 'O' levels certificate or higher
• Relevant qualifications in veterinary care would be an advantage
• Minimum 1 year experience as a Vet Nurse

You will be required to work up to 5 days per week (inclusive of one weekend).

At Evervet, we are strong advocates for staff welfare. We encourage continuing education so that you may continue to improve your skills.

Do note that only shortlisted candidates will be notified.

Job Type: Full-time

Salary: From $2300.00 (remuneration commensurate with experience)

Please submit your CV to [email protected]

• To carry out general maintenance and repairs of Industrial machines at customer's site
• Inspecting machinery and equipment to identify any defects or potential issues
• Performing routine and preventative maintenance tasks to keep equipment running at optimal levels.
• Simple cleaning of Machines that may involves climbing of 2-3 meters height
• Keeping records of all maintenance and repair work done within a facility
• Keeping a clean and organized work area for safety and efficiency
• Ensures proper care, protection and inventory of maintenance tools and machine spare parts
• Tasks assigned as and when assigned by customer on site
• Training will be provided
• Has relevant experience working in a Engineering environment

A) Engine Technicians

• Perform disassembling and assembling of engine while adhering to technical and quality specifications.
• Perform overhauling on the engine
• Perform repairing type of aircraft engine parts such as parts in the intake,compressor, combustion and exhaust sections
• Perform repair on aircraft engine high pressure compressor blades (HPC Blade) and Land Marine blades
• Perform welding and aircraft engine compressor blades and land marine blades
• Perform profiling of cold section compressor air-foils
• Perform removal and replacement of air filter
• Perform removal and replacement of engine pipelines
• Perform non-destructive testing on engine parts
• Perform engine propeller change and engine run up as per maintenance manual

B) A&C Line/ Base

• Conducts daily routine pre-flight inspection including servicing prior to aircraft departure.
• Performed daily and weekly Transit checks of aircraft including repair/ rectification if necessary.
• Review the cabin maintenance logbook and Aircraft maintenance logbook and rectify minor defect or malfunction recorded by flight/ cabin crew and maintain records of all actions taken. Ensure general working condition and security of all cabin equipment including serviceability of all emergency and demo equipment.
• Accomplishment of customer’s aircraft’s maintenance checks, check, inspection, repair, modification, and testing safety, demonstration, emergency and loose equipment, removal/ installation, repair, overhaul, modification, and refurbishment of all aircraft seats.
• Carry out maintenance and functional checks of cabin equipment and associated components in accordance with the company’s standard procedures, manuals, and manufacturer’s specification to ensure its serviceability condition and attachment security for passenger’s comfort and safety. (e.g. - main wheel assembly, tyres, brake assembly, passenger seats, side bin, overhead bins, sidewall, ceiling panels, carpets, seat covers, passenger and cockpit windows etc.)
• Base Maintenance are designed to repair, overhaul and testing facilities for aircraft such as B747, B737, B777 and A330, A340, A319/ 320 but are not limited to perform and preparation servicing such as A, C, EQ, S1 and S2 check with the applicable AMMs while observing the airline Safety and Quality procedures.

C) Cabin

• Perform the task of cleaning aircraft interior and exterior during periodic overhauls.
• Tasks includes removing and cleaning carpets, wiping windows, changing curtains, removing waste from seats, cleaning lights, changing & moving passenger seats, cleaning electrical equipment, maintaining and repairing airplane cabins, maintaining entertainment and lighting systems, performing laboratory cleaning and replenishing activities, performing floor vacuuming, cleaning seat pockets, luggage storage area, etc.
• Changes lighting systems and repairing entertainment systems, seat electrical systems, etc.
• Comprehensive knowledge of aircraft cleaning operations and activities as well as facility maintenance.
• Perform the task of removing and cleaning curtains, discarding waste from the seats, and adjusting bulkheads.
• Flexible and possesses the willingness and ability to work for long hours and on weekends.
• Ability to perform the given tasks in high noise areas and at great heights (with PPEs)
• Maintenance and repairing of aircraft cabins.
• Maintain, repair and restore cargo compartments and its components.
• Maintain inventory items required for handling the cleaning activities.
• Install cabin interior components into commercial aircraft including seat tracks, overhead bins, galleys, side panels, bulkheads, etc.
• Maintain the quality of the aircraft interiors on the operated fleet.
• Maintain the interior and exterior cleaning standards on the operate fleet.

D) Sheetmetal

• Perform minor and major maintenance checks, such as removal and installation of access panels, inspection of areas prone to corrosion
• Perform sheet metal structure repair work and alteration of damage aircraft in accordance with work specifications of structure repair manual (SRM), component maintenance manual (CMM), or any engineering authorizations and manufacturer specifications to return aircraft serviceable and airworthy condition.
• Perform minor and major maintenance checks, such as removal and installation of access panels, inspection of areas prone to corrosion
• Perform sheet metal structure repair work and alteration of damage aircraft in accordance with work specifications of structure repair manual (SRM), component maintenance manual (CMM), or any engineering authorizations and manufacturer specifications to return aircraft serviceable and airworthy condition.
• Replace or make repairs to skins and structural component of aircraft as required using appropriate technical orders, blueprints drawings and tools.

D) Avionics

• Maintenance and servicing of avionics systems.
• Carry out component changes.
• Assist engineers in trouble-shooting and rectification
• Assist in installing and servicing avionics communications equipment.
• Ensure that newly installed systems and those that have been repaired meet requirements mandated by the Federal Aviation Administration and specifications set by aircraft manufacturers.
• Participate in designing, purchasing, testing and calibrating avionic systems such as computer and electronic communication panels.
• Avionics technicians are responsible for inspecting and testing the complex electrical and computer systems that allow aircraft to function.
• Oversee airplane's radar system, radio communications equipment and the flight controls.
• Ensure systems are functioning properly.
• Removal, assemble and install electrical components, and keep detailed written records of repair work performed on aircraft. (E.g. Main Battery, Emergency Battery, Starter Generator, ACW Generator, GCU, BPCU, etc.)
• Removal and installation of engine and propeller electronic controls.
• Performs components changes, tests, and adjustments on aircraft electrical avionics systems consistent with the quality standards.

E) Painter

• Works under minimum supervision to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.
• Safely perform aircraft preparation, painting, and detailing of aircraft under minimal supervision. Coordinate with supervision and Inspection to ensure compliance mandated by the Aviation regulatory authorities and specifications set by aircraft manufacturers and customers.
• Follow standard operating procedures when using tools and equipment such as sanders, hydraulic lift platforms and paint sprayers.
• Properly care for and maintain shop equipment and tools.
• Follow standard operating procedures when using sealants, paint strippers and corrosion-preventive chemicals and use protective equipment as required.
• Comply with safety rules and procedures and be alert for unsafe conditions.
• Address unsafe conditions before putting people or property at risk.
• Assist with aircraft movement in hangars.

f) Planner

• Plan and schedule preventive maintenance tasks in aircraft checks to ensure compliance with requirements
• Review all maintenance tasks and preparation of Works Program
• Preparing maintenance work packages for base maintenance checks (C-check / D-check)
• Reviewing job cards after maintenance is completed.
• Develop and provide for material and tooling requirements
• Ensure smooth tasks execution by coordinating with other operational departments
• Implement and track approved modification programmes
• Perform task closure in system.
• In charge of monitoring components being replaced prior for maintenance checks.
• Carry out other duties as assigned

Requirements:

• Minimum diploma in engineering, preferably in Aerospace or relevant certificates.
• At least 3 years of working experience in the aviation industry as a full fledge technician, excluding OJT (On Job Training), helper and assistant mechanics.
• Mechanically and electrically trained (Maintenance)
• Exposure on GE CFM Engines, Rolls Royce Trent, Engine Alliance GP, and PW Engines.
• Excellent analytical, interpersonal, communication and problem-solving skills
• Mechanically and electrically trained on Aircraft systems
• Proficiency in the English language (Read, Write, Speak)
• Exposure on commercial aircrafts from Boeing and Airbus, wide and narrow bodied airframes

Purpose of the Position

Reporting to the Shift Supervisor, the Process Technician's primary responsiblity is to ensure the smooth operation of his/her assigned Process Unit, be it in either the Field or DCS Panel Operation.

Job Description

DCS Operation

• Perform starts up and shuts down according to Standard Operating Procedures, Work Instructions or Checklists.
• Monitor and control process variables via DCS (towers, reactors, driers, compressors, etc) to maintain quality & plant in steady & efficient condition.
• Respond to process alarms, process upsets or abnormal process conditions according to established practices and procedures in order to begin or cease production as advised by Supervisor or Engineers.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Initiate and perform Safety bypass with approval from Supervisor.

Field Operation

• Performs equipment line-ups and operate towers, reactors, driers, compressors, pumps, etc according to established practices and procedures.
• Responds to upsets or abnormal process conditions according to instructions from Supervisor or Panelman.
• Troubleshoots equipment and/or process problems in order to identify needed corrections or improvements.
• Collect process samples from assigned sampling points in a safe manner.
• Equipment Inspection Tours according to checklist.

Requirements

• NITEC in Chemical Process Technology /Diploma in Chemical Engineering or related discipline.
• Min. 1-2 years Operational experience with demonstrable exposure to Process Plant Operations and site-based activity or equivalent.
• Experience in Safety Awareness programs or involvement in Safety Committees will be an added advantage.

Our client is a leading global provider of integrated facilities and corporate real estate management. They leverage the industry's most powerful knowledge base to meet the commercial real estate needs of their clients worldwide. They are looking to recruit Aircon Technicians to join the team.

Would this be the next career for you?

· Install, repair, adjust, and maintain small electric or pneumatic control systems used for building. This includes heating, ventilation, air conditioning, and refrigeration systems and equipment.

· Conduct ongoing maintenance on building HVAC equipment to ensure proper operation of equipment and compliance with all applicable codes, regulations, and work safety.

· Troubleshoot equipment failures and determine best course of action for equipment modifications.

· Use existing procedures to solve straightforward problems while having a limited opportunity to exercise discretion.

If you are someone with the following, let’s chat!

· High School Diploma, GED, or trade school diploma with 3-5 years of job-related experience

· Meet the physical requirements of this role including stooping, standing, walking, climbing stairs/ladders, and the ability to lift/carry heavy loads of 50 lbs. or more

· Working knowledge of Microsoft Office products. Examples include Word, Excel, Outlook, etc.

Next Steps

Apply today or contact us to discuss this exciting opportunity

Do note that we will only be in touch if your application is shortlisted

Re Source Partners Pte Ltd | 202021170E | 20C0279

Tan Xin Hui | R23112426

Job Responsibilities:

• Operate the Radial Drilling Machine (Junction boxes/control panels).
• Installation, termination and performing the electrical wiring for control panel, instruments and machine per drawing.
• Assembly and installation of the components and fittings.

Basic up $3000 + AWS + Variable Bonus + Overtime
Good benefit & welfare including medical insurance

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

AlwaysHired Pte Ltd

Reg No: R1441412

EA: 24C2293

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use and/ or disclosure of personal data by AlwaysHired and its affiliates for the purpose of job application processing and administrative purpose, in compliance with the relevant provision of personal data protection act.

• Up to $2300
• 5.5 days Work per Week
• Monday – Friday (8.30am – 6pm), Saturday (8.30am – 1pm)
• Multiple work Locations available

Responsibilities:

• Perform maintenance, repairs, and servicing tasks across Electrical, Air Conditioning, Mechanical, Building, and General Repairs.
• Execute preventive, corrective, and breakdown maintenance for M&E works, air conditioning, or building infrastructure.
• Conduct facility or building maintenance, including troubleshooting and repairing mechanical, electrical, and plumbing systems.
• Promptly address defects and customer complaints, responding efficiently to fault reports, client requests, and breakdowns.
• Carry out regular maintenance and repairs on building facilities and systems to ensure smooth operations, reporting any issues to the supervisor.
• Perform preventive inspections and troubleshoot M&E systems.
• Record and inform the supervisor of any faults or issues found during routine checks.
• Complete any additional ad hoc duties as assigned.

Additional Information:

• 1-2 years experience and above in Facilities Maintenance or Engineering company
• Minimum NTC/ ITE/ NITEC/ HIGHER NITEC/ VOCATIONAL CERTIFICATE in Mechanical / Air-Con / Electrical / Electronics /Building / Facility Management or facilities maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Raymond Ng Jun Han | EA Personnel No.: R1657009

ALG is recruiting for an Avionics Technician for our Aerospace Client.

This is a permanent role is based in Singapore. Candidates who have just graduated with a diploma in electronics are welcome to apply.

PRINCIPAL ACCOUNTABILITIES

o Set up and operate test equipment in the repair, overhaul and modification of Avionics Line Replaceable Units.

o Conduct regular functional/self test and calibration on Automated/Manual Test Equipment.

o Ensure all test equipment are within calibration due-date before testing of LRU is carried out.

o Perform modification in accordance to service bulletins on LRUs as and when required.

o Troubleshoot customer's unit and return it to serviceable condition in the most efficient manner.

o Verify and ensure all repairs or modifications carried out conform to quality and workmanship standards.

o Maintain good housekeeping practices at work place and test benches at all time.

o Carry out duties as assigned by the Supervisor to meet team’s objectives.

KNOWLEDGE AND SKILLS

o Minimum Diploma in Electronics a must.

o Minimum of one year experience in Avionics equipment repair; those with no experience is welcome.

o Able to read digital and analog electronics circuitry.

o Able to perform manual soldering on electronics components.

o Have good color perception.

o Able to communicate effectively in English, both verbally and in writing.

o Ability to interpret schematic diagrams, troubleshoot and repair PCB assembly down to component level is highly desired.

o Competent to conduct tests according to the Component Maintenance Manual.

o Able to interpret, evaluate test results and write test report.

If you are interested in this role, please APPLY NOW! Please note that only shortlisted candidates will be notified.

EA Licence Number: 11C4379 | Registration Number: R22105273

Technician | Up to $2.8k | Woodlands

Salary: $2300 - $2800 + OT
Working Hours: 5.5 Days
Working Days: Mon - Fri (8.30 am -5.30 pm; Sat: 8.30 am -12.30 pm)
Working Location: Woodlands Industrial Park E1

RESPONSIBILITIES:

• Perform in-house or onsite repair or maintenance of warranty and non-warranty products to provide a fully functional unit that meets quality standards and applicable specifications for exchange stock or return to customer.
• Test and calibrate all repaired equipment as required to ensure original design specifications are met.
• Identify root cause and diagnose problems accurately and perform necessary corrective actions to resolve issues during service calls.
• Troubleshoot, diagnose problems of faulty equipment and evaluate failed units to ensure cost effectiveness of repair versus replacing defective components.
• Provide customers with quotes of time and material for repairs using Company's established guidelines for pricing.
• Prepare repair estimates & statements.
• Monitor schedules and work closely with customers to ensure accurate, correct and expeditious repairs are done on a timely basis.
• Repairs and maintenance are to be completed on schedule to specified standards and procedures.
• Coordinate with accounts / sales staff that customers are invoiced immediately.
• Work closely together with customer service, sales and related functions to resolve any technical issues / complaints expeditiously.
• Design modifications to equipment to compensate for component changes or non-availability of obsolete components.
• Maintain a clean and safe work environment using the correct tools properly.
• Perform all work in accordance with established safety procedures and standards.
• Upkeep, maintain, repair and calibrate tools and equipment used for work to optimal condition.
• Maintain records of all breakdowns and repair for analysis
• Keep track of the company’s inventory and update the inventory list accurately and promptly.
• Provide product feedback to management for continued quality improvement on products.

Requirement:

• Possess Nitec / Diploma in Electrical, Electronics, Mechanical Engineering or equivalent courses with relevant experience will be considered.
• 2 - 5 years of hands-on experience in the repair and maintenance of food processing equipment or industrial production machinery.
• Ability to read and understand basic wiring diagrams, mechanical drawings & floor plans.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

1. Candidate must possess at least a Professional Certificate, Diploma/Advanced/Higher/Graduate Diploma in Engineering (Electrical/Electronic), Engineering (Industrial), Others or equivalent.
2. Required language(s): Preferably English and Mandarin spoken.
3. At least 6 Year(s) of working experience in the related field is required for this position.
4. Preferably specialist in Engineering - Electrical or equivalent.
5. Must have knowledge in Instruments and Electrical System for Process Control Environment
6. Knowledge and understanding of SCADA, DCS System, PLC, Instrumentation, Field Devices.

Job Scope:

1) Maintenance of Field Instruments for multiple Process Plants.

2) Troubleshooting and problem solving for field Instruments.

3) Calibration and commissioning of field Instruments.

4) Electrical equipment troubleshooting and general maintenance for the process plant.

Technician

Salary: $2300 - $2800 + OT

Working Hours: 5.5 Days

Working Days: Mon - Fri (8.30 am -5.30 pm; Sat: 8.30 am -12.30 pm)

Working Location: Woodlands

Responsibilities:

• Perform in-house or onsite repair or maintenance of warranty and non-warranty products to provide a fully functional unit that meets quality standards and applicable specifications for exchange stock or return to customer.
• Test and calibrate all repaired equipment as required to ensure original design specifications are met.
• Identify root cause and diagnose problems accurately and perform necessary corrective actions to resolve issues during service calls.
• Troubleshoot, diagnose problems of faulty equipment and evaluate failed units to ensure cost effectiveness of repair versus replacing defective components.
• Provide customers with quotes of time and material for repairs using Company's established guidelines for pricing.
• Prepare repair estimates & statements.
• Monitor schedules and work closely with customers to ensure accurate, correct and expeditious repairs are done on a timely basis.
• Repairs and maintenance are to be completed on schedule to specified standards and procedures.
• Coordinate with accounts / sales staff that customers are invoiced immediately.
• Work closely together with customer service, sales and related functions to resolve any technical issues / complaints expeditiously.
• Design modifications to equipment to compensate for component changes or non-availability of obsolete components.
• Maintain a clean and safe work environment using the correct tools properly.
• Perform all work in accordance with established safety procedures and standards.
• Upkeep, maintain, repair and calibrate tools and equipment used for work to optimal condition.
• Maintain records of all breakdowns and repair for analysis
• Keep track of the company’s inventory and update the inventory list accurately and promptly.
• Provide product feedback to management for continued quality improvement on products.

Requirement:

• Possess Nitec / Diploma in Electrical, Electronics, Mechanical Engineering or equivalent courses with relevant experience will be considered.
• 2 - 5 years of hands-on experience in the repair and maintenance of food processing equipment or industrial production machinery.
• Ability to read and understand basic wiring diagrams, mechanical drawings & floor plans.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Our client is a Manufacturing MNC. Due to business needs, they are now recruiting a Laboratory Technician to be part of their Labortory Team for ongoing transformation projects. They are located in the West - easily accessible.

Duties of Laboratory Technician:

• Assist in routine lab tasks such as paint preparation, panel setup, and airless spray applications.
• Conduct sampling, testing, and analysis for paint products.
• Support chemists in development projects, including managing stock levels for panels, raw materials, and lab supplies.
• Participate in trial applications and inspections outside the lab under supervision.
• Handle non-chemical waste disposal and maintain a safe work environment by following ISO, safety, and environmental standards.
• Communicate progress or delays effectively with the line manager.
• Ensure workplace safety, especially in handling chemicals, and follow preventive measures to reduce risks.

Requirements:

• Diploma in related field
• Entry level are welcome to apply. Training provided.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

As an Ophthalmic Technician, you will be responsible for the following duties:

• To provide Ophthalmic Investigations

• To provide anterior Segment assessment

• To provide refractive Surgery assessment

• To practice due diligence during all patient interactions to ensure patient safety.

• Any other duties assigned

Requirements:

• Diploma in relevant discipline

• Min 1-year experience

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

Avionics Workshop Technician role reporting to Operations Manager performs critical Testing, Repair and Troubleshooting of Flight Control Actuations Electronics ensuring that final products are safe and meet customer expectations while keeping the repair process as effective and cost-efficient as possible.

Responsibilities include:

· Test, Repair and Troubleshooting Tasks

· Shop Process Control and Monitoring

· Safety Management and Human Factors

· Documentation and Data Input

· Preventive Maintenance of Equipment

· Continuous Improvement Initiatives

Entry level position with candidates undergoing extensive training and qualifications. Diploma or NITEC in an Aerospace/Aviation science or engineering discipline. Aviation background and experience preferred, aviation regulatory papers a plus.

• Analytical skills – need to be able to spot problems quickly and find the underlying causes so changes can be made
• Critical thinking – once problems are identified, solutions and improvements must be found. This might involve thinking about a process, procedure or problem in a completely new way.
• Attention to detail – as the people responsible for the technical work performed, as well as the people who notice and report on problems, every detail must be noticed and acted upon when necessary
• Numerical skills – statistical analysis and data analysis
• Communications skills – strong written and verbal communication skills are key. Must be able to relay potentially complex ideas to a wide range of audiences – both in personal consultations but also through company SOPs and technical documentation
• Team working skills – working as part of the operations team, and in close coordination with other teams throughout the facility (as well as potential for interaction with suppliers and customers)

☑ With or Without experience – NO EXPERIENCE REQUIRED

☑ Must have Class 3/3C licence

☑ PERMANENT NIGHT SHIFT – 9 am to 6.45 am

☑ 1 month office hours training, 8.45 am – 6 pm

Key Responsibilities:

· Carry out basic diagnosis, repair, maintenance and fault findings for the Electric Vehicles (EVS)

· Ensure the cleanliness of the interior and exterior of the EVs (80%)

· Update onboard PC and changing of SIM card

· Balancing/ Shifting of EVs to the stations when required

· Handle service anomalies such as unplugged cars, cars parked outside of stations, lost & found, etc

· Report on the information system via PDA

· Communicate with customers about our service when required

Key Requirements:

• NITEC in Automotive/ Electrical Engineering

• Candidate with hands-on automotive experience will be an added advantage

Interested applicants, kindly send your UPDATED resume in MS WORD format to ref9 at trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Xue Fen

EA Personnel Reg No: R1653801

Our client is a well-established MNC, market leader in the Pharmaceuticals industry. They are looking for a Process Technician to assist their team for the next phase of their business. They are located in the West – easily accessible.

Note: This is a 1-year contract, convertible and renewable.

Responsibilities:

• Adhere to company’s guidelines while operating and overseeing manufacturing machinery, promptly addressing any alerts during production
• Manage materials used in production and undertake cleaning and sterilization duties within the workplace
• Responsible for the daily functions/operations of designated manufacturing machinery
• Store materials in accordance with the prescribed company’s protocols
• Record/Maintain data in the company’s inventory management system
• Gather the necessary materials, equipment, and solutions for cleaning and sterilization
• Conduct both manual/automated cleaning and sterilization of machinery, containers, and workplaces
• Conduct calibration and pre-operational checks on manufacturing equipment, following the standard protocols
• Operate machinery equipment for filling and packaging purposes
• Identify/Resolve packaging quality issues, implementing the corrective measures as required
• All other adhoc duties as assigned

Requirements:

• Minimum Nitec/Diploma in any relevant fields of Engineering
• Minimum 1 year of relevant working experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)