Total 17,169 Maintenance / Repair job vacancies in Singapore

1) Cabin Technician

2) Aircraft & Component Technician

3) Sheetmetal Technician

4) Engine Technician

5) Ground Support Equipment Operator

CABIN AIRCRAFT TECHNICIAN

• To carry out inspection, repair, work on passenger and crew seats, galleys, toilets, aircraft cabin equipment and all fixtures & fittings items associated with the aircraft cabin interior in accordance with the approved company procedures and as per airworthiness and regulatory requirements.
• To remove and replace aircraft parts relating to the Aircraft Cabin to ensure high standards of maintenance of aircraft cabin and furnishings and to ensure the highest standards of passenger safety and comfort.
• Complete and maintain manuals and technical documents pertaining to the repair and maintenance work carried out on the cabin interior.
• Responsible for the cleanliness and tidiness of the working area.
• Monitor, maintain and control the movements of all spares and materials, to ensure their proper usage and deployment, including the returning to stores of all the un-used spares and materials at the end of each shift.
• To perform cabin configuration changes on fleet as per the operational requirements.
• To ensure cabin safety aspects are maintained during cabin maintenance and pay particular attention to Emergency equipment.
• To assist aircraft engineers & technician with regard to daily maintenance activities on the aircraft as assigned by Maintenance Supervisor.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionic Engineering/ Aeronautical Engineering.
• At least 2 years of Cabin Maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

A&C AIRCRAFT TECHNICIAN

• Perform C and D aircraft heavy maintenance tasks as directed by a Certifying Licensed Engineer/Duty Supervisor.
• Perform other tasks that may reasonably be requested by the Licensed Aircraft Engineer/Duty Supervisor.
• To carry out routine aircraft servicing tasks as required in accordance with maintenance manual procedures, observing all safety procedures and manufacturers/company regulations. Depending on the discipline this may include conducting general visual inspections and fluid replenishment system servicing, refuelling etc.To effectively use any specialized tooling or test equipment that may be required as part of the checking, testing, replacement or servicing of a system or component.
• The ability to understand the need for such equipment’s as references in the aircraft manufacturer’s manuals is essential.
• The ability to communicate at various levels, and to coordinate with other areas over technical issues, to ensure that all relevant parties are aware of the aircraft’s serviceability status.
• To ensure the maintenance of tools and equipment in the relevant work place and conducting safe working practices at all times.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of A&C maintenance working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Able to commit rotating shifts, if applicable.

SHEETMETAL AIRCRAFT TECHNICIAN

• To perform Structural Repair as per OEM approved Structural Repair Manual and Repair Disposition.
• To assist Aircraft License Engineer and Supervisory Lead to perform damage/repair assessment.
• To perform part forming such as skin doubler, stiffener and bracket for structural repair proposes in-accordance to OEM approved manual or drawing.
• To perform basic airframe/cabin task as required to facilitate access removal for structural repair.
• Required excellent tool maintenance and housekeeping practices.
• Any other ad-hoc duties assigned by the Supervisor.

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 5 years of Sheetmetal working experience in Aviation industry, excluding OJT/Helper.
• Exposure on wide bodied airframes, Boeing and Airbus commercial aircrafts.
• Familiar on basic structural repair tooling and practices.
• Must be able to work in confine space such as Fuel Tank if needed.
• Capable to interpret OEM Approved Engineering Drawing, Aircraft/Component Maintenance Manual and Structural Repair Manual.
• Able to commit rotating shifts, if applicable.

ENGINE OVERHAUL AIRCRAFT TECHNICIAN

• Perform disassembly/ assembly of engine/ module for repair and overhaul.
• Perform Boroscope inspection
• Install engine components onto the engine/ module.
• Perform troubleshooting, modification and maintenance works

Requirements:

• Minimum NITEC/Diploma qualifications in Aerospace Engineering/ Aerospace Electronics/ Aerospace Avionics Engineering/ Aeronautical Engineering.
• At least 2 years of Engine Overhaul working experience in Aviation industry, excluding OJT/Helper.
• Able to commit rotating shifts, if applicable.

GROUND SUPPORT EQUIPMENT OPERATOR

• To carry out preventive and corrective maintenance of the GSE
• To ensure equipment decals are visible. Replace if necessary
• Delivery of GSE to and from hangar
• Carry out inspection of GSE around airport bays
• Repositioning of maintenance steps from bays when required
• To ensure all metal structures of GSE are corrosion free by removal of corroded surface and using of corrosion protection agent
• To lubricate all movable joints

Requirements:

• NITEC in Mechanical / Electrical / Mechatronic engineering
• Class 3 or 4T preferred

Job Scope:

Working in the Memorial Facilities and Planning Division within the Public Health Services and Capabilities Group, you will assist to provide after-death care services at government after-death facilities i.e, Choa Chu Kang Cemetery.

• Assist to monitor ground situation and track status of work done and services
• Will be required to work on weekends and public holidays, including overnight shift if necessary.
• Provide directional assistance to member of public visiting the facilities
• Support crowd control at the facilities
• Assist supervisor to perform administrative duties
• Perform other duties assigned by supervisor i.e, verification of burial plot

Job Requirements:

• Good interpersonal communication skills
• Able to communicate in both spoken and written English & Chinese
• Willing to work in after-death care service environment
• Able and willing to work on weekends and public holidays and after office hours
• Able to perform night duties
• Possess good physical stamina to walk and stand for long durations every day, and to withstand exposure to weather conditions.
• Able to work independently as well as in teams

Contract Period: 3 months

Location: Choa Chu Kang Cemetery @ Old Choa Chu Kang Road

Salary: $10 - $11/hour

Founded in 1919 Rawlplug developed and patented the first ever professional wall fixing.

We expanded dramatically and today we are one of the world's leading manufacturers of professional anchoring and fixing systems, used in construction, industrial and retail markets, with distribution on every continent and 100 years of industry experience.

The Role:

Currently we are looking for an experienced and self-driven Service Technician to join our team.

As an Service Technician, you will be responsible for providing after sales support for Rawlplug's customers in terms of servicing of Power Tools.

We are looking for committed professional with a friendly approach.

Key responsibilities:

• Perform diagnostics, maintenance, installation and repairs of Company's Power Tools.
• Assist customers in technical solution and problem solving by performing testing & repair works.
• Analysis, interpretation & troubleshooting of Power Tools.
• Monitor inventory of spare parts and equipment.
• Keep a track of history service repairs.
• Maintain cleanliness and safey at work area.

Key requirements for a perfect candidate:

• At least a Diploma in Engineering fields.
• At least 1 year in technical service of power tools.
• Experience with power tools and diagnostic tools.
• Hand on experience with power tools.
• English speaking.
• IT literate with good communication skills.
• Able and willing to learn about products.
• Patient and friendly personality.
• Team player.
• Good time-management skills.
• Detailed & organised.

We look forward to receiving your application and regret that only shortlisted candidates will be notified.

Duties

• Conduct regular checks and inspection on grounds and report on irregularities found so as to ensure proper operation of the building.
• Carry out servicing, repairs and modification works such as replacing light bulbs, water taps and handyman services.
• Carry out preventive and adhoc maintenance work.
• To perform other job related and ad hoc duties as assigned.

Qualifications & Requirements

• NITEC in Engineering or Building Services discipline or
• Relevant trade training, WSQ certificates and experience will be considered.
• Preferably with at least 3 years of relevant work experience.
• Must be a team player as and when necessary.
• May be expect to work after normal working hours if necessary.

Notice

• We regret to inform that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.
• By submitting any application or resume to us, you will be deemed to have read and agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining and disclosing your personal information in relation to your potential employment with us.

Consequences of Not Providing Personal Data for Application/Service

• Please note that should you not consent and provide us with the relevant personal data to fulfil the ‘Purposes’ of collection, use and disclosure of your personal data by the company (including associated companies under the Advancer Group), it may hinder our ability to continue to interact with you. We may not be able to make a decision on your recruitment and employment or comply with the law and therefore, we may not be able to make an offer of employment.
• You may refer and access our website for more information.

Location: Biopolis

Duration: until 30 Jun 2024

Salary: $2200

Mon-Fri office hour

1. Routine laboratory testing on raw materials or finished products, media preparation and non-routine testing (special projects)

2. Set up and maintain bacteria culture and mammalian cell culture based on available SOP/ protocols.

3. Perform various microbiology, cell-based and biochemical/ molecular biology in vitro and ex vivo assays for various projects

4. Perform routine lab housekeeping

Requirement

• Min. Diploma in Science or related disciplines, microbiology background will be preferred.

• A team player with out-going personality, a passion for research and is detail-oriented at work.

• Good organizational, communication and coordination skill to multi-task and meet deadlines as needed.

• Possess intermediate skills in Microsoft Office suite of software

• Having prior knowledge in Life Sciences (Molecular Biology, Cellular Biology, biochemistry etc.) will be an advantage. • The candidate must adhere

If interested, please email me at [email protected]

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

Administrative Assistant +Facilities Executive (Facilities Management) for Hospital – Start as 3 months Temp to 1 year contract under Recruit Express, at the end of 1 year there will be a completion bonus
Central Location
Office Hours, 5 days, salary: $3000-$4000 (depending on exp)
This role will be 80% ADMIN OFFICER + 20% FM exec

• Create purchase order, compile all the quotation, delivery order, service report and invoices. Perform good receipt and submit month end accrual. Compile work order status and completion and outstanding. Attend to phone call, liase with contractor, HOD and end user in related to FM Department. Perform any other administrative duty as required by Senior Manager
• Responsible for the projects and addition & alteration works of hospital, medical centre and other associated business unit as instructed by the management
• Track preventive maintenance works and service contracts for the department and support the car park operations
• To assist in projects and addiction & alteration works as assigned by Head of Department or reporting Supervisor
• Facilitate and manage assigned projects within given deadline & budget
• Independent and resourceful. Good problem solving & analytical skills
• Able to work well with people from across different departments and levels
• Support the car park operations

For interested candidate, please email your resumes to [email protected]

Denyse Nicole Tan Shuqin (#HDT)
Recruit Express Pte Ltd
CEI No: R1333503
Company EA license : 99C4599

Summary Benefits:

• Basic $2000- $3000 + Allowances + OT
• AWS + Performance Bonus
• 5 Days, Office Hour
• Location : East
• Career progression & flexi benefits
• Multiple roles available

Requirements:

• Entry Level are welcome to apply. Training will be provided
• Multiple department hiring is available
• Candidate with experienced either in Engine Component/ Avionics/ Mechanical/ Machinist/ Painting / Chemical will have added advantages
• Nitec/ Higher Nitec/ Diploma in Aeronautical / Aerospace / Avionics/ Electrical/ Electronics Engineering
• Experience in aviation/ aerospace industry will have added advantages but not compulsory

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Responsibilities:

• Assist in office facilities and maintenance requirements by scheduling, assigning and follow up with vendor/ contactors on work progress;
• Undertake and oversee office renovation projects and work with various vendors/ contractors to ensure completion;
• Assist in enhancing office efficiency by planning and implementing office systems, layouts, and safety equipment’s procurement;
• Recommend any improvements to reduce cost or increase efficiency of the facilities services;
• Responsible in the general office management like yearly carpet and office cleaning service
• Assist with Building Management FSM to conduct and coordinate fire drill - CERT exercise
• Support Production and Engineering departments on facilities maintenance, not limited to yearly disposal of expired chemical and damaged equipment under the compliance procedure
• Track and update planned preventive maintenance schedule. Manage quarterly/ yearly renewal and compliance of necessary building and facilities permits and inspections
• Organize and maintain proper facilities management documentation and records
• Provide Office Admin support

Requirements:

• GCE ‘0’ Level or above
• At least 3 years of relevant working experience in Singapore
• Proficient in MS Office software
• Bilingual in both English and Mandarin
• Possess good interaction skills and able to communicate with people at all levels
• Strong coordination and multi-tasking skills
• Able to work fast pace environment and complete assigned tasks within schedules
• Willing to do hands-on work such as packing, checking and organizing stock items
• Responsible, committed and independent
• Positive work attitude and keen to acquire new knowledge for self-improvement
• Basic salary commensurate with experience

TeamWork is an independent international group, founded in 1999 in Geneva by its current CEO Mr. Philippe Rey-Gorrez. As a a strategic partner in digital transformation, TeamWork is involved in four core businesses: Business Consulting, SAP Business Solutions, Salesforce, Data Analytics and Technology Platforms.

Recognized by its clients for its expertise and experience, TeamWork supports both major international accounts and SME and has nearly 1,100 employees spread over 23 international locations (Switzerland, France, Germany, Luxembourg, Vietnam, Singapore, China, India, Canada, United States of America).

In the context of constant growth of our local workforce, and in order to support our international clients on large-scale projects in Southeast Asia, we are currently looking for a SAP PM (Plant Maintenance) Senior/Lead Functional Consultant who will reinforce our regional team.

The profile must be autonomous, rigorous management and personal organization, with recognized and appreciated relational skills.

Job Description:

• Must have Implementation & support experience of SAP Plant Maintenance (PM)

· Responsible for the system Requirement study, Solution design, System Configuration, Testing, User Training, Data conversion, Documentation, System integration as per best practice of SAP PM

• Corrective Maintenance Process, Performance, Preventive maintenance Process, Time Based preventive Maintenance Process, Refurbishment Process, Calibration Process

• Master data viz, PM Material, Assembly, Serial Number, BOM, Maintenance Task List, Measuring Point, Counters, PM Work centres, and Maintenance plans.

• Broad Interface interactions with Business Process

• Successful implementation of change request & projects

• Strong Leadership & communication Skills Education/ Experience Requirements

• Prefer interface experience in IBM Maximo

Qualifications /Skills & Requirements

• Candidate must possess at least bachelor’s degree/Post Graduate Diploma/Professional Degree

• Minimum 5-7 Years of SAP PM experience as a SAP Consultant Skills, Abilities & Knowledge with preferred ECC and S4HANA experience (not required)

• Very good business knowledge, process-related in Plant Maintenance, It Service Management Knowledge

• Business Fluent English, MS Office, MS PowerPoint, MS Projects, ABAP debugging

• Project Management experience is added advantage.

• Experience working in a global environment.

Job Descriptions :

• Able to work independently lead the in-house drafting team and provide guidance to junior staffs and maintain a high quality / documentation standard;
• Collaborative and a good team player, with good working attitude and be proactive; Inept knowledge and interest in carpentry and/or construction details;
• Well verse in the Primary Software, and at least one additional skills list under the Secondary Software;
• Experience in creating BIM Model and critical building elements using Revit and able to apply relevant materials & finishes will be a plus;- Produce interior fit-out CAD / REVIT drawings;
• Check and understand drawings and illustrations provided by architects / design consultants and work closely with Project Managers to provide shop drawing list and schedules;
• Generate interior architectural shop drawings packages for client approval and construction;
• Generate interior architectural and/or structural drawings for submissions;
• Generate interior architectural as-built drawings; Maintain proper records, updates of drawings and documentation to ensure easy retrieval;
• Be responsible and deligent in ensuring the drawings achieve the required quality for client review, update and check drawings for accuracy as necessary;
• Good knowledge and interest in carpentry and/or construction details is a must, and able to apply these knowledge in the preparation of details drawings;
• Able to apply knowledge of relevant local code and requirements in generating drawings;
• Basic understanding of ergonomics and Universal Design guidelines;
• Be involved in site survey and site measurements to verify data as required;Requirements :

Education & Qualifications:

- Diploma in Design (Interior Design)
- Diploma in Experiential Product & Interior Design

- Specialist Diploma in Architectural Technology
- Specialist Diploma in Interior & Landscape Design
- Certificate in Interior Design
- Nitec in Architectural Technology
- Higher Nitec in Architectural Technology
- Nitec in Interior & Exhibition Design

*Applicant should possess at least one of the above qualifications

*Applicant to submit any other relevant professional qualifications if not list aboveAdditional / Professional Qualifications: Certificate in BIM Revit for Architecture (Level 1 / 2)
Certificate of Competency (COC) in Architectural BIM
Certificate of Competency (COC) in Building Information Modelling

*Above additional qualification is not mandatory but will be a plus

*Applicant to submit any other relevant professional qualifications if not list aboveYears of Relevant Working

Experience: 7 Years (minimum)

Language Proficiency (Written / Oral): English

Primary Software Skills Required: Autodesk Revit;
Latest AutoCAD / AutoCAD LT;
Microsoft Words;
Microsoft Excel
Secondary Software Skills Required: SketchUp
Adobe Acrobat

Descriptions/Responsibilities:

1) To respond to service calls and service/repair banking equipment (banknotes/coins currency machines) & office equipment (shredders, etc) based on SLAs.

2) To provide scheduled maintenance servicing (monthly/quarterly) of banking & office equipment based on SLAs.

3) To ensure service cards are duly signed and acknowledged by customers upon completion of servicing.

4) To submit documentation eg. Invoices, work orders and daily reports promptly upon completion of work.

5) Compliance with Company Operational & HR practices and regulatory guidelines & requirements.

6) To perform any other work-related activities as given by the Technical Manager/Supervisor.

Requirements:

1) Completed Secondary School or NTC 2/3 Trade Certificate in Mechanical/Electrical or related.

2) Minimum 1-2 year experience an advantage. Without experience may also apply. Training will be provided.

3) Possess Class 3 or Class 2B with own bike is preferred.

4) Proficiency in basic spoken and written English.

5) Able to commence work immediately.

- Permanent

- Ubi

- Mon – Fri; 8:30am – 5.30pm & 7pm-9pm (OT with pay), Saturday 8:30am to 12:30pm

- Up to $1600 + OT Pay

Job description:

• The Pest Control Technician executes technical processes involved in pest management independently and when required, manages a team of workers.
• He/She performs pest management work by applying appropriate pest management mitigation and prevention methods.
• He uses both chemical &/or non-chemical based methods as well as tools and equipment.
• He identifies issues on-site and recommends appropriate techniques to handle pests and infested areas.
• He also performs routine maintenance of tools & equipment and prepares chemicals to be used.
• He is expected to perform his work indoors and/or outdoors, and is required to comply with safety procedures and protocols.

Critical Work Functions

• Plan pest management operations
• Provide inputs for manpower and resource planning for pest management work.
• Perform site assessment to determine scope of work.
• Prepare pest inspection reports for planning pf pest management work to be carried out.
• Handle tools & equipment
• Adhere to applicable workplace safety & health (WSH) regulations and use of personal protective equipment (PPE).
• Follow & perform maintenance checklists for safety & functionality checks on tools & equipment.
• Carry out routine maintenance of tools and equipment.
• Operate equipment (fogger, sprayer, mister etc) for pest management work and perform trouble shooting when necessary.
• Repair tools & equipment and change spare parts.
• Execute pest management services
• Prepare and/or allocate work site areas for pest management work by segregation.
• Identify and analyse the types of pests to be handled.
• Prepare & allocate chemical &/or non-chemical pest management methods to eliminate pest infestation.
• Manage team and guide workers to perform pest management work.
• Resolve technical &/or manpower challenges that may impact pest management work om-site.
• Manage pest disposal and reinstate work site.
• Prepare work site reports to track work progress.
• Recommend preventive measures to clients on pest management.
• Handle incidents
• Respond to incidents and emergencies as directed.
• Report operational abnormalities to appropriate person eg. supervisor/Manager.

Period:

• Permanent

Working Hours:

• Mon – Fri; 8:30am – 5.30pm & 7pm-9pm (OT with pay), Saturday 8:30am to 12:30pm (paid training)

Salary:

• Up to $1600 + OT Pay

Working Location:

• Ubi Ave 4

Requirements:

• He should be physically fit, task-oriented and an able team leader to lead the workers
• on-site, resolves issues on-site and an effective communicator with customers.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

• Basic up To $4300
• Working Hours: Mon - Fri (9.00am - 5.00pm) But be prepared to come back during emergency
• location: Suntec/Capital Square
• Permenant Role + AWS + Variable Bonus (up to 1.5months)

Job Responsibilities:

• Assist managers in daily operations of Office Towers.
• Liaise with office tenant and to handle fit out and hand over of units.
• Investigate and follow up on defect rectification.
• Manage fitting-out for compliance with rules and safety.
• Coordinate with contractors/vendors for timely projects.
• Ensure contract and license renewals.
• Issue POs and verify contractor work.
• Manage online systems: occupant portal, access control, etc.

Job Requirements:

• Min. 2 year(s) related experience at Office Tower or Industry Office.
• Min. Diploma in Facilities Management and related fields

For consideration, kindly submit your CV or TEXT +65 9422 1220 for confidential discussion.

*Only shortlisted candidates would be notified*

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R22111807 | Yap Teng Hui

Job Responsibilities:

Pega Platform - Design, build and configure applications to meet business process and application requirements.

Job Requirements:

1 - Pega Platform

2 - Configuration & Release Management

3 - Design & Build Enablement

4 - Build Management Skills which are good to have / optional: 1. Pega version 8.x development experiences (must have) 2. Certified Pega System Architect, or Certified Pega Senior System Architect

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Simply click on 'Apply here' to drop your resume or email at [email protected]
• All shortlisted candidates will be contacted.

Saghana Sithara | Registration Number: R1550224

Salary: up to $2300

Working Days & Hours: Any 5 days a week, 2 shifts

Location: Lakeside

Job Description:

• Manage day to day operations in inventory management e.g. receiving of stocks, weekly distribution of supplies to wards
• Assets management and labeling of assets
• Update on stock level and replenishment where required
• Improving productivity standards
• Issuance and receiving of stocks
• Create Purchase Requisition and receive Purchasing Order
• Ensure orders are met and delivery are carried out in a timely manner
• Any other duties assigned
• Facilities
• Conduct general repair and maintenance of premises and equipment
• Prepare and arrange rooms in the Home for different functions
• Assist in assets movement and labelling of assets
• Ensure the key facilities are functional and trigger external maintenance when needed Report to the Reporting Officer of any equipment malfunction or breakdown
• Man the Fire Command Centre, CCTV monitoring system, fire safety alarm system and attend to security issues, eg. activate SCDF when required
• Participate as member of the Homes Fire Safety Committee and support Operations to attend to any fire hazard

Job Requirements: Min NITEC/Diploma in Electrical Engineering or similar

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

** This is a 1-year contract role, where conversion to permanent after 1 year will be based on business needs and individual performance **

Job Description

• Able to operate the machine assign by the supervisor
• Taking care of the working area following 5S and Safety Standard
• Conduct machine daily maintenance
• producing the part based on the schedule given
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements

• Minimum NITEC/Higher NITEC in Mechanical/Electrical Engineering, or a related field
• High motivation to learn
• Singaporeans only

1) Daily Operations

• Provide professional and courteous service to all patients/customers
• Process medication orders/prescriptions for both inpatient and outpatient
• Picking, packing and labelling in accordance with stipulated policies, guidelines and department standard operating procedures
• Perform billing functions
• Ensures work area is ready for daily operations
• Maintains the cleanliness of the pharmacy and ward areas where drugs are stored
• Involvement in workplace quality improvement projects/activities as and when required

2) Inventory Management

• Ensures stocks are stocked up properly and tidily according to First-Expiry-First-Out (FEFO) requirement and stipulated storage condition
• Able to use omnicell to determine availability of stock in various wards
• Ensures correct receiving of goods
• Secondary repackaging/redressing
• Carry out cycle counts and stock takes periodically according to SOPs

3) Dispensing

• Dispensing of medications to patients in accordance with stipulated policies, guidelines and department standard operating procedures

Requirements

• Possess Certified Pharmacy Technician Certification (CPTC) OR Diploma in Pharmaceutical Science
• Have initiative and able to work independently to achieve goals of the department
• Able to communicate effectively
• Able to function effectively as member of a team

Interested candidate, kindly send a copy of your resume to: [email protected]


Jessica Fong Zhi Tong [R1879124]
Email Address: [email protected]
Recruit Express Pte Ltd
EA Licence No: 99C4599

- Temporary 3-4 months (renewable and convertible to perm)

- Mon – Fri; 8:30am – 4:30pm

- North west area – Sembawang, Woodlands

- $10-$12 per hour

Job description:

• The Pest Control Technician executes technical processes involved in pest management independently and when required, manages a team of workers.
• He/She performs pest management work by applying appropriate pest management mitigation and prevention methods.
• He uses both chemical &/or non-chemical based methods as well as tools and equipment.
• He identifies issues on-site and recommends appropriate techniques to handle pests and infested areas.
• He also performs routine maintenance of tools & equipment and prepares chemicals to be used.
• He is expected to perform his work indoors and/or outdoors, and is required to comply with safety procedures and protocols.

Critical Work Functions

• Plan pest management operations
• Provide inputs for manpower and resource planning for pest management work.
• Perform site assessment to determine scope of work.
• Prepare pest inspection reports for planning pf pest management work to be carried out.
• Handle tools & equipment
• Adhere to applicable workplace safety & health (WSH) regulations and use of personal protective equipment (PPE).
• Follow & perform maintenance checklists for safety & functionality checks on tools & equipment.
• Carry out routine maintenance of tools and equipment.
• Operate equipment (fogger, sprayer, mister etc) for pest management work and perform trouble shooting when necessary.
• Repair tools & equipment and change spare parts.
• Execute pest management services
• Prepare and/or allocate work site areas for pest management work by segregation.
• Identify and analyse the types of pests to be handled.
• Prepare & allocate chemical &/or non-chemical pest management methods to eliminate pest infestation.
• Manage team and guide workers to perform pest management work.
• Resolve technical &/or manpower challenges that may impact pest management work om-site.
• Manage pest disposal and reinstate work site.
• Prepare work site reports to track work progress.
• Recommend preventive measures to clients on pest management.
• Handle incidents
• Respond to incidents and emergencies as directed.
• Report operational abnormalities to appropriate person eg. supervisor/Manager.

Period:

• Temporary 3-4 months (renewable and convertible to perm)

Working Hours:

• Mon – Fri; 8:30am – 4:30pm

Salary:

• $10-$12 per hour

Working Location:

• North west area – Sembawang, Woodlands

Requirements:

• He should be physically fit, task-oriented and an able team leader to lead the workers
• on-site, resolves issues on-site and an effective communicator with customers.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Registration no: R1332758)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: 97C4832)

3 Shenton Way, #19-01 Shenton House, Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Our client is from Oil and Gas industry. They are looking for a C & I Engineer to assist their team for the next phase of their business. They are located in West.

Duties:

• Responsible for Yokogawa DCIS, SIS, and FGS support to ensure safe operations.
• Installation, troubleshooting, and maintenance of automation systems.
• Manage vendor contracts and provide technical training.
• Develop and maintain maintenance procedures and documentation.
• Execute projects related to automation and plan for system lifecycle.
• Lead Cyber Security compliance and conduct risk assessments.
• Offer expertise in OT cyber-security projects.

Requirements:

• Min Degree in Computer, Electrical Engineering or any relevant field.
• Min 4 years of working experience in Oil and Gas and utilities or any relevant industry.
• Experience in ISO27001 and IEC61508 will be anadvantange.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115873 (New Jirn Tone)

• romoting the company's existing brands and introducing new products to the market.
• Analyzing budgets, preparing annual budget plans, scheduling expenditures, and ensuring that the sales team meets their quotas and goals.
• Researching and developing marketing opportunities and plans, understanding consumer requirements, identifying market trends, and suggesting system improvements to achieve the company's marketing goals.
• Gathering, investigating, and summarizing market data and trends to draft reports.
• Implementing new sales plans and advertising.
• Recruiting, training, scheduling, coaching, and managing marketing and sales teams to meet sales and marketing human resource objectives.
• Maintaining relationships with important clients by making regular visits, understanding their needs, and anticipating new marketing opportunities.
• Staying current in the industry by attending educational opportunities, conferences, and workshops, reading publications, and maintaining personal and professional networks.

Field Service Technician (Electrical Alternator)

5 days, 9am-6pm

Salary: up to $3500 + $300 transport allowance

Address: Joo Koon (site travelling is required) + Overseas travelling (reimbursement)

Company profile:

A world leader in electric motors, electromechanical and electronic drive systems and in industrial alternators.

Job scope:

• Generate basic & detailed electrical engineering design development and electrical instrumentation input to other disciplines.
• Performs maintenance activities on servicing & repair of mechanical & electrical equipment onboard vessels, onsite or in workshop
• On-site investigations in the event of a breakdown to define the root-cause of the failure, takes remedial action & makes reliability improvements
• Monitor the serviceability of equipment & facilities & ensure they adhere to safety, housekeeping & environment requirements
• Digital solution for generator, installation, and commissioning.
• Develop & review risk analysis & procedure
• Liaise with customers on work schedule & defect findings
• Immediate response to any urgent request for on-site, on board, or offshore work.
• The writing of on-site reports, and online assistance for troubleshooting,
• Temporary transfer to the repair workshop in the event of on-site works load drop,
• Compliance with travel rules to minimize costs and ensure the security,
• The support of the Sales teams for their opportunities.

Requirements:

• Diploma/ Degree in Electrical Engineering
• Min 5 years of experience in maintenance of electrical rotating machines
• Candidate is required to work on-site or overseas for troubleshooting

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Job Description

• Perform assembly, repairing and reworking of printed board & hardware assemblies.
• Assist Engineer in conducting tests in-door, and occasional outdoor.
• Operate test equipment, training to be provided.
• Assist Facility Manager in management and maintenance of equipment and facility.
• Assist Engineer to source for components/parts.
• Generate simple test plans and test reports.

Requirements

• 1-2 year working experience (soldering skill), preferably with IPC certifications like IPC-A-610, J-STD-001 or IPC-7711/7721
• Possess good communication skills.
• Possess good teamwork and problem solving skills.
• Ability to work with minimal supervision.
• Open to Singaporeans only.

Send me your resume via WhatsApp ❤

80138164

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Nets Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asias Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. Its uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Responsibilities

• Manage the maintenance and daily operations of the DC facilities with the objective of achieving uninterrupted availability at all times and to ensure the fulfillment of our service commitment to customers.
• Support service delivery to ensure contracted service level agreements and key performance indicators are met or exceeded.
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, HVAC outages. Analyze data and identify trends with facility issues to determine root cause and take appropriate action.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Support for customer installations, in coordination with the design & construction as well as operations requirements to coordinate customer move-in and turn-on, and other service request & deliveries.
• Maintain compliance with local workplace safety & health (WHS) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participate in the scheduling, coordination and completion all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Support various accreditation, certification and compliance initiatives such as BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR, etc as may be required.

• Preferably with minimum 1 year experience in Data Center Facilities Management & Operations environment and service delivery.
• ITE/Diploma in Electrical or Mechanical engineering or equivalent qualification
• 24x7 rotating shift duty
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio and PDF documents
• General technical and functional knowledge of data center infrastructure to include electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, space planning, construction of critical facilities environment
• Working location : 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

Our company is currently looking for Maintenance Technician(s) to be station in Changi Airport. The successful candidate will be responsible for the operation and maintenance of the Passenger Boarding Bridges (PBB).

Job responsibilities:

· Carry-out routine preventive maintenance as per standard operation procedure for Passenger Boarding Bridge.

· Respond to emergencies, break-downs and malfunctions of Passenger Boarding Bridge.

· Perform trouble shooting and equipment failure check.

· Conduct visual check on all hardware of Passenger Boarding Bridge after maintenance services.

· Update and maintain spare parts inventory to ensure that necessary components are readily available for repairs and maintenance.

· Record all faulty arise and maintain proper maintenance records.

· Strict adherence to safety rules and regulations

· Any other task as assigned by immediate supervisor/management.

We regret to inform that only short-listed candidates will be notified.

Requirements:

· Min NITEC in Engineering / Electrical / Mechanical / Automotive / Air-Conditioning / related fields

· Min 2 years relevant working experience

· Strong hands-on technical skills

· Proactive attitude

Other Information:

· Location: Changi Airport

· Working hours: 5 days

· Permanent position

· Supervisor position available for candidates with more experience

Job Description

• Industry/ Organization Type: Manufacturing (Marine)
• Position Title: Service Technician / Maintenance Technician
• Working Location: Tuas
• Working Hours: 5.5 days (Mon – Fri, 8.30 am – 5.30 pm, Sat, 8.30 am – 12.30 pm)
• Salary Package: Basis up to $2,500 + AWS + OT + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Conduct routine service, maintenance, and repair of marine turbochargers
• Troubleshoot technical issues and provide timely solutions
• Ensure the equipment is in good operating condition after inspection, service and repair
• Follow according to the maintenance schedule
• Safety of all machines for production and quality
• Other general maintenance works

APPLY NOW!!!

• Physically fit
• At least 1 year of relevant work experience

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65946 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781