Total 6,160 site engineer job vacancies in Others category in Singapore

Principal Responsibilities

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• Planning and Execution of all Equipment (Rotating) Preventive Maintenance and Corrective Maintenance .
• Review all documents available in GDMS and work with LE to prepare equipment BOM and upload into SAP system.
• Condition Monitoring of Rotating Equipment through Online and Offline Vibration Analysis, Oil Analysis and other techniques.
• Planning, execution and monitoring of contractor routine and non-routine maintenance activities and perform troubleshooting or provide guidance where issues arise.
• Planning and coordination of shutdown maintenance activities of Rotating Equipment based on local and Global PM requirements, Vendor recommendation & Industrial Best practices.
• Review risk analysis and maintenance procedures on regular basis.
• Upkeep maintenance records for equipment modifications, repair and rerating on regular basis
• Identify and update discrepancies in plant equipment records or on field.
• Participate in the root cause analysis (RCA) on process incidents and process inducted mechanical failures, recommend corrective actions to permanently eliminate them and follow up on closure of the actions.
• Initiate the Engineering Management of Change (EMOC) and execute the changes for plant improvement and modification works.
• Facing External / Internal Audit and closing of the actions within given time limit.
• Identifying bad actors in the plant and reliability improvement by implementing short term and long term solutions.

Required Qualifications/Experience

• Degree in Mechanical Engineering with at least 7 years’ of maintenance experience in Oil & Gas / Petrochemical industry or Diploma holder with 10 years’ maintenance experience Oil & Gas / Petrochemical industry preferred.
• Experience in a Gas Plant such as Gasification/SMR/ASU is an advantage.
• Good conceptual knowledge on design and maintenance of all Rotating Equipment such as Steam Turbine, Centrifugal Compressors, Reciprocating Compressors, Screw Compressors, Multistage Pumps etc.
• Good conceptual knowledge of Industrial standards such as API, ASME etc for Rotating & associated Static Equipment.

Job Responsibilities:

• Sales & Marketing of products for industrial automation, electrical protection and electricial distribution system
• Identify new business opportunity and develop new accounts
• Achieve expected level of sales and margin objectives
• A proven record of negiotating and securing new business
• Generating high-quality sales leads, following up after initial contacts, securing and renewing orders, negotiating prices, completing sales and arranging deliveries
• Discussing equipment needs an system requirements with customers and engineers
• Manage and service existing customers' accounts

Job Requirements:

• 2 years experiences in Sales and Marketing of industrial products, engineering services
• Relevant industry experience an advantages
• Strong communication, interpersonal, customer service and sales skills
• Self motivated, interest in sales & new business development
• Valid class 3 driving licence
• Own transport an advantages
• Willing to travel overseas when required
• Preferably can join within short notice
• Proficient in Microsoft Office software like Excel, word etc

Benefits:

• Medical/Dental
• Transport Allowances
• Career development and opportunities
• Positive, friendly working environment

Working hours:

• 5 days work week
• 8.30 am to 6.00 pm

Working Location:

• UBI

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• Preform day to day operations and supply of utilities (eg Electricity, Water, Air Conditioning) to support company operations
• Take charge of operations and maintenance of facilities related equipment and system such as
• Chilled Water System, ACMV, Electrical, Building Maintenance System (BMS), CCTV, Barrier and
• Access Control System (ACS)
• Carry out electrical (415V and 6.6kV circuit breaker/switchgear) and mechanical (valves) isolations for maintenance work to be carried out
• Coordinate with various vendors and company Licensed Electrical Worker (LEW) to perform plant power shutdown maintenance
• Work with production users on facilities related repairs, enhancement works and renovation projects.
• Work with management on facilities equipment upgrading and replacement works.
• Attend to faults and complaints from users and perform initial investigations and troubleshooting

Requirements:

• Min Degree Electrical Engineering.
• Relevant working experiences in manufacturing/semicon company
• Good technical skills in Electrical Facilities
• Able to work in a team.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a E&I Engineer to assist their E&I team for the next phrase of their business. They are located in South – easily accessible.

Duties of E&I Engineer:

• Responsible in designing and developing new control systems, which can be complex in nature necessitating the expert application of engineering knowledge and control disciplines such as process control, programmable logic controllers (PLC), and supervisory control and data acquisition (SCADA).
• Responsible to prepare, review and approval of drawings, instrument lists, data sheets, elect diagrams, control architecture, logic diagrams, operating procedures
• Responsible to plan and self-monitor daily engineering and design work assignments
• Responsible in controling and monitoring job costs and schedules to meet completion dates, customer technical specifications and internal technical specifications
• Responsible in developing and using engineering standards (electrical, instrument, etc.), procedures and forms for engineering design and production fabrications.
• Responsible in providing engineering advice and support to engineers and Project Managers.
• Responsible in preparing FAT procedure and test Control system
• Responsible in conducting training on plant operation & maintenance.
• Responsible in performing plant start-up & commissioning/ troubleshooting.
• Responsible in representing the company for customer discussions and technical reviews

Requirements

• Minimum Degree in Engineering/ Electrical or equivalent
• Minimum 5-8 years of relevant experience
• Knowledge of Microsoft Office and AutoCad
• Knowledge of PLC programming experience is a bonus
• Prior experience with SCADA system is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.
We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

EA License No: 19C9682

EA Personnel No: R21101676

EA Personnel Name: Ng Zhi Qing Alethea

Responsibilities:

• Develop and ensure the design of electrical equipment, systems, and materials submissions align with technical specifications, particularly in electrical engineering.
• Plan project costs and master schedules.
• Assess labor needs and material resources for construction.
• Manage on-site activities, including installation, manufacturing, coordination, safety, testing, and commissioning, in line with client requirements.
• Coordinate with LTA, consultants, civil contractors, and system-wide contractors for work execution, including testing and commissioning.
• Supervise a team of site engineers, supervisors, and subcontractors to meet project deadlines.
• Assist the Project Manager in overseeing project planning, execution, and construction.
• Other ad hoc tasks as assigned.

Requirements:

• Min Diploma in related Engineering field.
• With 3+ years of experience in a similar industry.
• Previous MRT Project experience is a plus.
• Able to work independently.
• Collaborative team player with strong analytical skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY

button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that

we may collect, use or disclose your

Job Description

Our client provides multimedia video cloud to world-wide users. Its video cloud is one of the world's largest and leading video platforms, providing media storage, transcoding and streaming services. Our Client is committed to building the next generation video processing platform and the largest live broadcast network to provide an excellent experience for billions of users around the world.

The role of solution engineer requires in-depth understanding of the video cloud business architecture, helping internal/external business parties to deepen product awareness, promote product optimization, and output the best solution in combination with product capabilities.

As a technical expert, you will be working closely with client's global video cloud R&D and engineering team to promote continuous optimization of products, tools, and processes.

Job Responsibilities

1. Responsible for the design and development of video cloud based solutions;

2. Responsible for collaborating with developers and solving the problems encountered by developers during integration with video cloud services as well as the quality issues in the production service process;

3. Responsible for management of suppliers' demands, sorting out the issues in the integration with suppliers, promoting the development and optimization of technical specifications, and reducing service problems;

4. Have overall awareness, help establish a Quality Service (QS) evaluation system, improve the efficiency of problem handling, and effectively promote the resolution of quality and efficiency problems in the research and development process;

5. Organize structural learning points and consolidate developer handbook to form a common knowledge base for the solution team.

Job Requirements

1. Bachelor’s degree or above in Computer Science or other related majors, with solid fundamental computer science knowledge, strong logical thinking and learning abilities, and understanding of software design patterns;

2. Good professional accomplishment and self-drive, strong technical enthusiasm, able to continue learning and self-improvement;

3. Hiving excellent data analytical skills, issue identification ability, with prior experience in full-chain data collation and data-related tools;

4. Good knowledge of networking fundamentals and protocols (eg. TCP/IP, HTTP/HTTPS, etc.). Familiar with audio & video multimedia protocol, CDN distribution acceleration, RTC and other technologies is preferred;

5. Experience in project management, video cloud related experience or enterprise integration experience is preferred;

Key Responsibilities:

Project planning and execution including but not limited to the following activities:

- Attending site meetings

- Drawing up of main work program and follow up on project schedules

- Sourcing and procurement of vendors for additional jobs on the project

- Maintaining contact with customers / consultants on project progress and technical issues

- Liaising with Design Team for drawings to be submitted for discussion and/or approval

- Liaising with Workshop on installation, testing, commissioning and other work required

- Preparing test procedure and coordination of testing and commissioning

- Auditing on installation and jobs done on the project

- Compiling of final document for submission to customer

- Experience to handle data center

Requirements:

- Minimum Diploma in Marine / Mechanical / Electrical required

- Minimum 5-7 years Project Management experience in Data Center / Building Power Generation environment highly preferred

- Fundamental technical knowledge in the diesel power generation highly preferred

- Required to do site work

- Proficient in MS Office

- Strong project management and interpersonal skills

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

Responsibilities

· Handle site documents including daily record, photo record etc. and assist to maintain proper documentation at site

· Liaise and coordinate with sub-contractors and the logistics and ensure the work progress meet schedule

· Coordinate with trade contractors on construction details and working sequence

Requirements

· Min. 3-5 years site experience in interior fitting-out project/building construction project

· Diploma in interior Design or Architectural Studies or relevant academic qualification is preferred

· Good team player and able to work under pressure

· Self-motivated, responsible, independent and hardworking

· Good computer knowledge and familiar in using MS Office

· Ability to read, understand and exchange the construction details with trade contractors

Sales Development

- To market and sale of products for overseas and local market.

- To support customers needs & requirement.

- Required travel to attend oversea customers.

Requirements

1. Relevan working experience in Sales preferred.

2. Advantahe to have mechanical engineering background.

3. Proficient in MS Office applications.

4. Salary commensurates with experience.

Responsibilities

a) Develop BIM models, design plans and/ schematic/calculation for projects (building and infrastructure) at conceptual and design stage for Mechanical and Electrical (M&E) works. This also includes Renovation & Refurbishment (R&R) and Additions & Alteration (A&A) projects;

b) Create, update, revise M&E BIM models. Generate documentation, drawings, quantities from BIM models. Ensure BIM quality and accuracy through the use of BIM standard, resolve element clashes / clash coordination, comply with local codes, regulations, authority submission procedures;

c) Provide support on all BIM related matters, such as BIM software trials, improve / set up BIM standards, BIM templates, BIM families, computational BIM tools, BIM Execution Plan, Employer Information Requirements (EIR), Light Detection and Ranging (LIDAR) scanning, incorporate latest BIM requirements / regulations, BIM knowledge transfers and etc;

d) Consult relevant authorities for clarifications and to seek in principal approval for the proposed BIM model and design;

e) Support the calling and evaluation of tenders for consultancy services and construction services;

f) To attend regular project meetings with internal and external stakeholders. Liaise and coordinate with Clients, Consultants and Contractors. Conduct BIM coordination meetings;

g) Review the concept, preliminary design, detailed design and tender documents (such as drawings, BIM models, specifications, cost estimates, schedules) from Consultants and / or Builder and services diversion, if any;

h) Prepare project brief/specification and support cost estimation effort for calling of;

i) Provide technical support and advice to internal departments and clients;

j) Provide technical support to non-building related development and projects, such as innovation studies, evaluation of new system or technologies, M&E improvement / initiatives, knowledge transfer and etc;

k) Respond promptly to technical submissions and queries from external parties, clients, business clusters and companies;

l) Provide technical support to non-building related development and projects, such as innovation studies, evaluation of new system or technologies, M&E improvement / initiatives, knowledge transfer and etc;

m) Respond promptly to technical submissions and queries from external parties.

QUALIFICATIONS OF THE MECHANICAL BIM ENGINEER / MODELLER

The Mechanical BIM Engineer / Modeller to be supplied by the Contractor shall possess the following minimum qualification/requirements:

a) At least five (5) years of BIM modelling and design experience for mechanical systems for building and infrastructure projects;

b) Experience with contract value of $10 million and above for building and infrastructure projects;

c) Degree in Mechanical Engineering or Degree / Diploma in BIM. The Degree in Mechanical Engineering must be from a University recognized by the Professional Engineers Board (PEB) Singapore and / or accreditation recognized by the Professional Engineers Board Singapore;

d) Possess good knowledge in BIM software such as Revit. Knowledge in BIM software such as Naviswork, BIM360 and design calculation software such as Autosprink, Relux and ElectricalOM and etc will be an added advantage;

e) The candidate must be familiar with BIM modelling, drawings, documentations, coordination and generate drawings directly from BIM software;

f) BIM certification courses from BCA or equivalent will be an added advantage.

[Order Number: 623341]

Responsibilities:

• Design and implement motion prediction, decision making and motion planning solution for self-driving vehicle
• Driving scenario analysis, Software-In-the-Loop simulation, behaviour/strategy design and motion planning
• Algorithm implementation and software validation
• On-road performance verification
• Code review
• Write professional design and technical documents
• Other ad-hoc duties as assigned

Requirements:

• Good programming skill on C++, with 3+ years software development professional experience
• Good knowledge on robotics decision system, e.g., Finite State Machine, Behaviour Tree, Expert System, POMDP etc.
• Familiar with path planning algorithms, e.g., A*, D*, RRT etc.
• Familiar with common DNN methods, understand typical network training process, and experience on at least one deep learning framework (pytorch/caffe/tensorflow)

To Apply, please kindly email your updated resume to [email protected]

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

EA Personnel Name: Gary Ho Cheng Xuan
EA Personnel Reg. No.: R1549767
EA Licence No.: 07C5771

The Site Engineer (Civil) is responsible for assisting the PM on the progress of site works and manpower related aspects of the project. He/She will be required to:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Workheads/Foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.

• Monitor day to day site construction/ operation matters and provide proper site control
• Coordinate and liaise with internal and external parties for progress of works
• Attend client /main contractor site walk and meeting when required
• Supervise and motivate the site staff to ensure the project running smooth
• Site working experience on monitoring sub-contractor installation progress according to the layout drawing
• Working experience with MBS projects is preferred
• 3-5 years experience working on the same ranking is a must

Description

Electrical design engineers are responsible for the drawing creation and modification. The job is to come up with innovative ways to build new or improve existing panel and junction box (JB). Electrical design engineers must have an extensive knowledge of electrical engineering principles in order to do their job effectively. They need to be familiar with electrical components for panel and junction boxes.

Responsibilities

Safety

1. Ensure Workplace in Safe and Healthy Environment.

2. Ensure No Slips, Trips and Falls environment.

3. Maintaining a tidy workspace.

4. To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

5. To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Responsibilities

1. To have and maintain good daily attendance and punctuality.

2. To update team members at least 2 working days in advance before going for leave in order to minimize downtime.

3. Lead Ex Proof Team

Daily Task

1. Daily Update of Project Progress to immediate superior.

2. Weekly report progress

Main Task

1. Ensuring accurate adherence to the client's quotation specifications in the drawing.

2. Daily Update of Project Progress to immediate superior.

3. Weekly report progress.

4. Design and Update Electrical & Instrument system layouts, single line diagrams, control schematics.

5. Equipment/material schedules and data sheets, control wiring diagram for control systems etc.

6. Drafts engineering documents for client’s submission or for construction.

7. Performs electrical calculations on cable sizing, lighting illumination level, cable ladder/tray sizing etc.

8. Preparation of Project Design basis and specification.

9. Preparation of Single Line Diagram.

10. Preparation of Cable and Power Layout, Earthing Layout and Hazardous Area Layout.

11. Basic Technical and feasibility studies based on the process scope of work.

12. Resource Planning for design works.

13. Performs drafting on all engineering and construction drawings as per instructions given.

14. Produces revised or as-built drawings based on mark-ups and instructions given.

15. Other Ad-hoc duties assigned from time to time.

Special Task

1. Lead the Ex-Proof team.

2. Lead to Coordinate and cooperates with other disciplines for documentations to get approval by the Client.

3. Preparation of Template for Internal Components Drawings

Requirements

· Preferably Degree in Electrical Engineering or equivalent and above

· Preferably minimum 3 to 10 years of design experience in Schematics & Layout design (including library design), Cable Assembly Design, and Design documentation.

· Preferably Proficient with MS Office Program, AutoCAD

· Preferably Knowledge on designing in 3D layout will be an advantage.

· Proficiency in English (written and oral skills) is a must.

· A responsible, self-motivated, meticulous and resourceful team player with good organizational and communication skills.

· Ability to multi-task and work independently in a fast-paced environment.

· Excellent problem solving and time management skills.

· Familiar with Code of Practices, electrical design, electrical calculations

Job Description:

1. Develop new customers to expand customer base.

2. Provide after sales service and technical support on existing customers.

3. Assist the team in the execution of the overall digital marketing strategy.

4. Project coordination and management including planning, scheduling, execution and handling project, coordinating with contractor and end user.

5. Liaises and communicates with client on project status, progress and variation order.

6. Maintain good rapport with customer by providing relevant technical support.

7. General administration support to project team on filing management and ensure all documentation is maintained orderly for each project.

8. Provide after sales service and technical support on existing customers and develop new customers to expand customer base.

9. Any other duties/task as required by the job and/or organisation where required.

Job Requirement:

1. Creative

2. Keen Learner with positive attitude

3. Strong sense of responsibility, confidence, initiative and commitment.

4. Good logical thinking and attention to details.

5. Good understanding of digital marketing concepts and best practices

6. Ability to work independently with minimum supervision

7. Preferrable with strong IT knowledge to support the digital marketing

8. Good communication skills both oral and written to liaise with people from all levels

Responsibilities:

• Preform day to day operations and supply of utilities (eg Electricity, Water, Air Conditioning) to support company operations
• Take charge of operations and maintenance of facilities related equipment and system such as
• Chilled Water System, ACMV, Electrical, Building Maintenance System (BMS), CCTV, Barrier and
• Access Control System (ACS)
• Carry out electrical (415V and 6.6kV circuit breaker/switchgear) and mechanical (valves) isolations for maintenance work to be carried out
• Coordinate with various vendors and company Licensed Electrical Worker (LEW) to perform plant power shutdown maintenance
• Work with production users on facilities related repairs, enhancement works and renovation projects.
• Work with management on facilities equipment upgrading and replacement works.
• Attend to faults and complaints from users and perform initial investigations and troubleshooting

Requirements:

• Min Degree Electrical Engineering.
• Relevant working experiences in manufacturing/semicon company
• Good technical skills in Electrical Facilities
• Able to work in a team.

Interested candidates who wish to apply for the advertised position, please click on

the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we

may collect, use or disclose

• Perform qualification validation of medical device sterilization related equipment and processes
• Perform the release of sterilization batches in accordance to relevant ISO standards
• Ensure the compliance of equipment in accordance to Calibration and Preventive Maintenance requirements.
• Perform complaint handling, investigate root cause of complaint, and perform Corrective Action and Preventive Action as necessary.
• Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.
• Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures
• Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing
• Participate in external and internal audit to ensure company quality system is effective
• Participate in continuous improvement programs such as 6S program, yield improvement projects etc.
• Support new production introduction as a team member representing quality
• Perform other tasks as assigned by the supervisor

Education

• Bachelors Degree in Engineering, Science (e.g. Microbiology) or equivalent

Experience

• Work experience as a sterilization engineer in a medical device manufacturing environment
• Experience with qualification validation of equipment and processes for sterilization of medical device
• Working knowledge of ISO11135 EtO Sterilization for Medical Devices and/or any other relevant standards such as ISO11137 Gamma Sterilization
• ISO13485 Internal auditor

Skills

• Statistical Analysis (Hypothesis Testing, ANOVA, Gage R&R, DOE etc)
• Root cause analysis (Kepner-Tregoe, 5-Why, 6M etc)
• Problem solving techniques (e.g. DMAIC/8D/PDCA/A3 application in continuous improvement)
• Competent with general PC and Office software application

DESIGN, UTILITY & INSTRUMENTATION ENGINEER

(Civil Engineering works)

Key Roles

1. Design and review of C&S systems during front end engineering design (FEED) and basic design for Instrumentation and Controls Engineering for centralised utility facilities, utility power and water, petrochemical industries and utility scale renewable projects
2. Develop C&S engineering design deliverables (control architecture, control and instrumentation datasheets, control system specification, etc.)
3. Review inter-disciplines design/ engineering with consideration for safety, quality, performance, reliability, flexibility of operation with optimal project and life cycle cost
4. Develop and continually improve internal engineering best practices and procedures to provide engineering services of high quality in support of the various projects
5. Evaluation of new technology and innovation solutions
6. Participate in engineering activities during project execution including but not limited to preparation of Scope of Work / Design Memorandum / Minimum Functional Specification, tender review on technical proposals and clarifications, attend site queries and site installation issues that related to design, pre-commissioning, testing and commissioning, PSSR, etc.
7. Review and approval of detailed design submitted by Contractors and ensure compliance with Standards and all the conpany best practices
8. Establish system and documentation for company engineering standards & specification, ITP, approved vendor/manufacturer list, material specifications, discipline's schedule of rates and cost estimate template, engineering checklists, etc.
9. Ensure all activities carried out are in full compliance to all regulatory and authority requirement
10. Managing the design of utility diversion route, supporting structure & other required struture
11. Study and determine the existing utilities, In-charge of site utility diversion work
12. Engage and liaise with approved subcontractor for any services diversion works
13. Identify and resolve system failures and perform to oversee preventative maintenance
14. Compile data on utility process units, monitoring system efficiency and energy and material usage
15. Manage utility construction projects, developing project scope, timelines specifications, and budgets

Requirements

• Bachelor's Degree in Instrumentation and Controls engineering discipline or equivalent
• Min 4 years of experience in civil engineering and project management
• Conversant with local codes and authority submission procedures
• Competent in common engineering design software, analytical tools and BIM software
• Proactive, responsible and keen to work in a team
• Excellent interpersonal, good verbal and written communication skills

Job Description

• Conduct daily construction inspection related works as directed by
  Manager and Engineer
• Coordinate with subcontractor to ensure construction works is carried out as per design and method statement
• Ensure construction record is timely and properly kept
• Monitor and feedback site progress, and monitor the rectification
  of any non-compliance
• Coordinate with safety department staff to ensure safety measures
  are been complied

Requirements

• Polytechnic Diploma in Civil Engineering
• Able to work on rotation basis
• At least 4-5 years of experience as a site supervisor with a construction Main-con.

Site Engineer/Supervisor (Construction / Commercial and Residential Building)

Responsibilities:

•Assist Project Manager in all on-site technical/ engineering matters and authority submissions.

•Supervise and monitor projects are carried out in accordance to company’s operating procedures, quality standards & contractual specifications.

•Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.

•Lead in Site Coordination and execution relating to the construction project.

•Planning of micro scheduling with other trades/disciplines against Master program.

•To update structural/architectural/M&E progress with scheduling tools.

•Ensuring supervisors & foremen meets clients’ regulatory work requirements.

•To check and ensure compliance with TOP check list

•Responsible for all inspection activities being carried out.

•Ensuring environmental, safety and health practices are carried out at all times.

Requirements:

•Degree/Diploma in Civil or Structural Engineering

•4-5 years experience in Building Engineering projects

•Proficient in MS Office, AutoCad

•Organised, meticulous with positive work attitude

•Able to work independently and a team player

•Good analytical, supervision and communication skills

•Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

. Must be able to work night shift or split shift
. Must be able to work extra hours or weekend if needed

Responsibilities:

• Reporting to the site manager or other senior project managers as required.
• Ensuring that requirements, as specified by the client and senior management, are met.
• Monitoring labour, building material, and equipment budgets and curbing unnecessary expenses.
• Supervising on-site construction work and relaying instructions from senior project managers.
• Reporting any concerns that might negatively impact projected cost and time estimates.
• Procuring materials, labor, and equipment, as well as third-party subcontractors and suppliers.
• Preparing work schedules and sequencing onsite tasks.
• Collaborating with other construction project stakeholders as required.
• Ensuring that construction industry safety regulations are followed.

Requirements:

• Bachelor's degree in construction management, civil engineering, project management, or similar.
• 5-10 years experience in assisting site managers with construction projects.
• Exceptional ability to monitor construction project budgets and deadlines.
• Proficiency in recordkeeping and electronic project management systems, such as Buildertrend and Procore
• Experience in relaying detailed instructions to onsite construction teams.
• Advanced negotiation skills to procure cost-effective subcontractors and suppliers.
• Ability to closely collaborate with other construction project stakeholders.
• Extensive experience in a deadline-driven environment.
• Knowledge of construction industry safety regulations.
• Excellent communication skills

Duties and Responsibilities

· To assist the Project Manager in the daily execution of work;

· Inspecting construction sites regularly to identify and eliminate potential safety hazards;

· Enforcing site safety rules to minimize work-related accidents and injuries;

· To supervise the work of sub-contractors and in-house workers;

· To work closely with other site operations staff to meet the project schedule;

· Ensure installation is carried out as per construction drawings;

· To monitor the progress and quality of work being performed by workers;

· Ensure that works are executed within an acceptable standard of workmanship;

· Attend the daily tool-box meeting and convey clear instruction accordingly;

· Understand and ensure compliance with project requirements and scope of work.

1. At least 2 years of working experience in the renovation contractor industry;

2. Proven experience working as a Supervisor;

3. Working knowledge of construction tools and equipment;

4. Highly proactive attitude, self-motivated, team player, problem-solving skills;

5. Excellent organizational and communication skills;

6. May need to work on Sunday and public holiday.

7. Able to work night shift and split shift