Total 34 supply chain engineer job vacancies in Quality Assurance / Control category in d17 loyang changi

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

Responsibilities:

• Perform internal audits as per internal audit schedule in accordance to AS9100, and PART-21 Subpart G requirements OR AS9110C and P-145 requirements
• Manage the qualification and authorization of Technician, Inspector and Signatory (APU)/ Certifying Staff (ARU)
• Facilitate training management, by doing operator audits, manage operator certifications, stamp register control, product authorization matrix, and follow up of re-certification
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Facilitate and participate in Analysis and Decision committee / Material Review board, related to product non conformity. (APU)
• Manage and update Quality procedures in the Quality Management System
• Validate the qualification of new test equipment
• Participate and contribute in Production Readiness Reviews
• Perform training on Quality related topics for staff
• Manage the internal production or repair quarantine.

Requirements:

• Degree/ Diploma in Quality, Quality Management or Mechanical Engineering or Electrical Engineering or Electronic Engineering or Equivalent
• Minimum 3 years of experience in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop or production
• Minimum 3 years of Quality Auditing experience
• Experienced in Procedural and Process developments
• Knowledge in: AS9100D (APU), PART-21 Subpart G (APU), Or AS9110C (ARU) Or PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations

· Manage supplier quality performance.

· Manage suppliers to ensure the part supply to the factory meet the quality requirement.

· Manage supplier First-Article processes and part qualification.

· Ensure supplier quality records are updated promptly.

· Responsible for ensuring that Supplier Quality Issue is resolved.

· Conduct External audit to ensure conformance to specified requirement.

· Support Internal, 3rd Party & Customer System audits.

· Report Supplier Quality Performance for management reviews.

· Support product/process qualification when necessary.

Skills Desired:

· Vendor management experience is preferred.

· Good understanding of quality management system & tools

· Self-motivated and deadline oriented.

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

About the Job

The Quality Department plays a very important role in Cyrus in maintaining the quality management system and driving quality improvements to deliver high quality products for our customers. You will be working closely with the Assistant Quality Manager on Quality Management System (QMS) and suppliers’ management.

Your key responsibilities are as follows:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Your areas of knowledge and expertise that matter most for this role:

· Diploma in quality management / Engineering / Manufacturing or related field

· Minimum 3 to 5 years of relevant working experience in handling audits and ISO documentation in manufacturing industries.

· Knowledge in Supplier Management

· Knowledge of quality Management Standards such as ISO 9001, 14001, 13485 and ISO 22301.

· Knowledge in Potential Failure Mode Effect Analysis (PFMEA), Control Plans .and Gage Repeatability & Reproducibility (GR&R)

· Familiar with 8D and 5W problem solving methodology.

· Good communication and presentation skills

· Organized and detail oriented.

· Positive attitude with ability to multi task.

· Independent, takes initiatives and able to work with minimum supervision.

· Good team player with good initiatives and ability to work independently.

ST Engineering is a global technology, defence and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. The Group harnesses technology and innovation to solve real-world problems, enabling a more secure and sustainable world. Headquartered in Singapore, it has operations spanning Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. ST Engineering reported a revenue of over $10 billion in 2023 and ranks among the largest companies listed on the Singapore Exchange. It is a component stock of MSCI Singapore, FTSE Straits Times Index and Dow Jones Sustainability Asia Pacific Index.

About Commercial Aerospace business

ST Engineering’s Commercial Aerospace business is a world-class Original Equipment Manufacturer (OEM) and Maintenance, Repair and Overhaul (MRO) service provider with proven solutions for practically every stage of an aircraft life cycle. With nearly 50 years of reputable track record in aviation, backed by a highly experienced team of engineers and technicians across facilities in Asia Pacific, the U.S. and Europe, we know what it takes to keep the world flying safely.

Key Job Accountabilities:

• Liaison with customer reps on documentation procedures including certification and maintenance release.

• Ensure all aircraft have valid documents such as Certificate of Registration, Certificate Of Airworthiness, Radio License, Insurance Certificate, etc as applicable.

• Conduct quality internal audits as scheduled by the Quality Audit Plan or as instructed by the Manager Quality.

• Carry out investigation into incidents, accidents,customer compliants and warranty claims.

• Carry out surveillance inspections at various stages of aircraft work in progress for correct maintenance practices, good housekeeping and proper documentation.

• Assist in the evaluation of new or amendments as appropriate of new or changes to existing contracted operators’ interface procedures.

• Carry out Airworthiness Directives review.

• Monitor and track contracted operators’ surveillance follow up action to closure.

• To consolidate the aircraft surveillance and investigation KPI on the program assigned.

• Any other duties as assigned by the Quality Manager.

Required Experience and Qualifications:

• Hold an Aircraft Maintenance Engineer’s License (AMEL) issued by the civil Aviation Authority of Singapore (CAAS) or a foreign equivalent license recognized by CAAS or an FAA A&P certificate or professional licenses relating to aviation.

• Minimum five years working experience in aviation industry.

• Shall possess Diploma in engineering or equivalent.

• Conversant with Airworthiness requirements and / or Quality Management System (AS9110).

• Able to perform internal and external quality audits is an added advantage.

• Strong knowledge of Microsoft Office applications.

• Excellent verbal and written communication skills.

• Able to work independently and in a team environment

Product quality review associated with the manufacturing process. Impacts quality of own work and the work of others on the team. Executes standard operational/technical tasks typically subject to instructions and work routines. There is latitude to rearrange the sequence to complete task/duties based on changing work situations.

Essential Responsibilities:

• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Customer Disruptions and improve customer satisfaction.
• Partner and engage with Operations and Engineering teams to facilitate and drive robust RCCA in order to reduce Workmanship/ WIP Losses, Rework and Turnbacks, and improve FTY, delivery performance, and COQ.
• Partner and engage with Operations/Engineering teams to facilitate and drive avoidance of repair-induced Departures.
• Track and monitor quality metrics (Yield, Losses, Escapes), and perform trend analysis to identify systemic improvement opportunities.
• Drive engagement & training of inspectors and certifying staff to ensure disposition & inspection
• Drive engagement and participation in Lean and quality improvement across the site.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.
• Act as focal point for all quality matters and clarifications for the business unit.
• Support internal audits and perform CAR verifications.
• Support, review and approval of New Product Introduction (NPI) and Process Change Notice (PCN) initiatives.

Qualifications / Requirements:

• Bachelor’s degree in Mechanical/Aerospace/Material Engineering from an accredited university or college (or equivalent)
• Candidate with relevant aerospace experience in repair/manufacturing processes or quality assurance role has added advantage.
• Fresh graduates are welcome to apply as well
• Good command of written and spoken English
• Basic proficiency with of PC tools and software (e.g. Microsoft Office)

Desired Characteristics:

• Knowledge of general aviation legislation and quality systems (AS9100)
• Knowledge of manufacturing processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Demonstrated work experience in reading and interpreting blueprints or engineering specifications;
• Knowledge of repair/manufacturing fundamentals
• Knowledge of Lean and Six Sigma quality concepts and tools.
• Knowledge of RCCA/HF techniques
• Knowledge of Lean concepts and tools.
• Strong attention to detail and accuracy
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed ​
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Responsible for Metallurgical and Calibration Laboratories support to the business units and ensuring quality of products shipped for the respective product cells assigned.

Essential Responsibilities:

• Provide supervisory and technical oversight of Metallurgical and Calibration Laboratories
• Responsible for safe operation of laboratories.
• Ensure training and competency of laboratory personnel to required standards.
• Ensure the compliance of laboratory processes to regulatory, industry and GE standards.
• Drive continual improvement of the laboratory in quality, operational effectiveness, productivity, and cost to support business metric improvements.
• Monitor laboratories utilization and efficiency to ensure manpower optimization.
• Manage and drive quality of responsible product cells assigned.
• Engage with Operational and Engineering teams to facilitate and drive robust corrective actions to improve quality, reduce workmanship / rework losses.
• Track and monitor quality metrics (Yield, Losses, Escapes), and perform trend analysis to identify systemic improvement quality opportunities.
• Support review of technical data change, approval of process change and new product introduction.
• Perform quality auditing as necessary.

Qualifications / Requirements:

• Bachelor’s degree in Mechanical / Aerospace / Material Engineering from an accredited university or college (or equivalent)
• Minimum 2 years of experience in either calibration or metallurgy laboratory functions
• Candidate conversant with laboratory quality systems (ISO17025) has added advantage.
• Knowledge of aviation MRO 145 standards has added advantage.

Desired Characteristics / Knowledge:

• Knowledge of Lean concepts and tools.
• Humble: respectful, receptive, agile, eager to learn
• Transparent: shares critical information, speaks with candor, contributes constructively
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative
• Problem solver: analytical-minded, challenges existing processes, critical thinker

Has the primary role to create, administer and implement all Regulatory and Quality trainings. Will also provide Quality Engineering support for regulatory compliance and the Quality System. In addition, will provide leadership and expertise in ensuring compliance to regulatory, GE and site quality systems requirements and work with other functional teams in the continuous improvement of system and operating procedures.

Roles and Responsibilities

• Design, maintain and administer the Company's quality training programs.
• Prepare curriculum, training material and recurrent training material to a defined standard.
• Teach formal classroom training courses such as but not limited to policy, procedures, maintenance paperwork, safety, Human Factors, airworthiness regulations, recurrent training and other subjects.
• Revise training curriculum and serve as subject matter expert.
• Design, maintain and administer GE Aviation – Singapore’s Quality System.
• Initiating, updating and maintaining QCWIs and other quality documents as and when required.
• Be in control of the Technical Library. Assure all data are up-to-date and that revisions are distributed to all Engineers affected.
• Facilitate all regulatory and customer audits, work with the appropriate functions in the formulation of corrective actions.
• Support the training and qualification of Certifying Staff.
• Be responsible for the archival of maintenance records. Supervise a team of Technicians in the scanning of maintenance records and ensuring the operability of the scanning equipment.

Required Qualifications

• Degree in Aeronautical Engineering
• Degree (Engineering) with 1 year of relevant experience

Desired Characteristics

• Minimum 2 years of aerospace experience in repair/manufacturing or a quality assurance role.
• Holds a recognized Lead Auditor or Internal Auditor certification.
• Knowledge of Quality Systems/ISO/Aerospace Standards.
• Possess CAAS Air Legislation paper.
• Knowledge of basic engineering and aircraft engine component repair.
• Good auditing experience.
• Good command of written and spoken English.
• Basic knowledge of PC software.
• Good initiative and analytical skills.
• Strong attention to detail and accuracy.
• Ability to communicate at all levels of the organization.
• Demonstrate oral and written communication skills.
• Strong interpersonal and leadership skills.

Job Description & Requirements
· In charge of the company Master Calibration System for all equipment/gauges

· Responsible for maintaining Quality Management System (QMS) ie, ISO9001 & ISO13485

· Interpret technical drawing and analyze CMM inspection reports

· Understanding on measurement of the critical dimensions of the parts by CMM, micrometer, Vernier caliper, gauges, smart scope, roundness tester, microscopes etc

· Use of the Departmental Quality Systems, Smart QC, High QA and NCR module to perform day to day duties

· Generate Process Control Plan and FMEA with Engineering Team

· Generate Inspection Plans for Incoming, In-process and Outgoing Inspections

· Generate Work Instructions for inspection-related processes

· Responsible for scheduled maintenance and calibration of measuring equipment, jig and fixtures

· Responsible for maintaining Non-conforming Product Control (Reject Material Report) procedure. Analyze and review Reject Material Report (RMR) with Engineering / Production when non-conformance found. Work with Engineering/Production to resolve on any of the non-conformance found

· Handle Customer complaints and perform CAPA analysis using 5-Why methodology

· Provide CAPA back to the customers within 5 working days whenever there are any quality issues arise

· Provide fast response (within one working day) to customer related matters upon request

· Generate periodic quality performance data and analyze for Continual Improvement

· Use of Statistical Process Control (SPC) techniques to analyze, establish and monitor manufacturing processes are in control

· Perform First Article Inspection report and buyoff with the customers

· Perform Source Inspection with the customers as requested

· Complete work and task assign by the superiors within the timeline given

· Perform ad hoc duties as requested

Tasks

• Develop, test, implement, maintain and optimize automation software delivery, defect management and drive software quality improvement
• Develop and maintain comprehensive test plans and test strategies based on product specification and requirements.
• Design, implementation and maintenance of continuous integration/ deployment goals, frameworks and tools
• Work continuously to improve processes around monitoring scalability, reliability, application quality and performance of the CI/CD build systems
• Collaborate with multi-location teams for alignment on test development and policies.
• Establish and maintain testing processes, methodologies and best practices to improve efficiency and effectiveness

Qualification

• Degree in Electronic/Electrical Engineering or Computer Science
• Minimum 8 years of experience in software testing, with proven track record of leading testing efforts for complex software projects.
• Experience in wide variety of development tools and continuous integration environment (e.g. Rational Team Concert, Jenkins, GIT, Jira) Proficiency in UI automation testing framework, tools and scripting languages (eg. Squish, Python)
• Experience with Agile methodologies and DevOps practices such as Continuous Integration and Continuous Deployment (CI/CD)
• Understanding of RF communication and radio monitoring equipment a plus.
• Good problem-solving skills and a passion for continuous improvement.
• Able to work independently and communicate effectively in a multi-national organization.

Job Description:

• Develop and implement quality control processes, procedures and standards to ensure that products or services meet or exceed customer expectations.
• Monitor and analyze data related to quality control processes, identifying trends and making recommendations for improvement.
• Perform audits of quality control processes, identifying areas for improvement and making recommendations for corrective action.
• Engagement with customer for resolution on issues and satisfaction.

Job Requirements:

• Bachelor's degree in Engineering or related field.
• Minimum 2-3 years experience in manufacturing field.
• Able to work under stress, dynamic and fast pace manufacturing environment.
• Strong teamwork mindset, posses effective organising and communication skill as need to cohesively work with customers and internal teams.
• Experience in semiconductor capital equipment manufacturing will be added advantage.

Job Description:

1. Supplier Quality Management

• Develop and implement supplier quality management programs.
• Conduct regular audits and assessments of supplier facilities to ensure compliance with quality standards and regulatory requirements.
• Evaluate and approve new suppliers based on quality performance and capability assessments.

2. Quality Assurance and Control

• Establish and maintain incoming material inspection processes and criteria.
• Monitor and report on supplier performance, including quality metrics, delivery performance, and corrective actions.
• Work with suppliers to develop and implement corrective action plans to address quality issues.

3. Continuous Improvement

• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.

4. Collaboration and Communication

• Serve as the primary point of contact for all supplier-related quality issues.
• Work closely with internal teams, including engineering, production, and procurement, to address quality concerns and improve supplier relationships.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders.

5. Documentation and Compliance

• Ensure all supplier quality documentation is accurate, complete, and up-to-date.
• Maintain records of supplier audits, inspection results, and corrective actions.
• Ensure compliance with industry standards, customer requirements, and regulatory guidelines.

6. Training and Development

• Provide training and guidance to suppliers on quality standards, processes, and requirements.
• Mentor junior team members and support their professional development.

Job Requirements:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 7 years of experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong knowledge of semiconductor manufacturing processes and quality standards.
• Proven experience in conducting supplier audits and implementing corrective actions.
• Excellent problem-solving, analytical, and organizational skills.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers and internal teams.
• Preferred Skills: Certification in quality management (e.g., CQE, Six Sigma, Lean Manufacturing) is highly desirable.
• Proficiency in quality management tools and software.
• Experience with regulatory requirements and standards specific to the semiconductor industry.

Authorities and Responsibilities

1. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives.
2. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
3. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with customers, production and suppliers to meet the quality requirements.
7. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
8. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
9. Manage the implementation / schedule of calibration control.
10. Participate in the implementation of risk assessment and risk control of medical devices

Competence Requirement

• Preferred to have NTC / Diploma / Degree in Precision / Mechanical Engineering or related discipline.
• Fresh degree may be considered while other educational qualification is required with preferred 3 - 8 years of relevant working experience in related Engineering industry.
• Possess good analytical, verbal, written and interpersonal skills.

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities

• Update the Maintenance Organization Exposition manuals, and associate documents.
• Actively drive the Safety Management System and manage the Hazard Identification & Risk Assessment system
• Conduct internal and vendor audits (SMS, SABRe, Part 145 regulations, ISO, Nadcap) to improve compliance
• Actively support external audits (SMS, SABRe, Regulatory Authorities, Customers, ISO, Nadcap)
• Monitor and analyze audit/investigation/voluntary reporting data and identify issues/opportunities for improvement
• Review / support vendor & customer quality questionnaire
• Develop and conduct regulation trainings
• Manage staff authorisation system by reviewing the qualifications and conduct competency interviews for certifying staff & internal stamp holders
• Actively drive initiatives like Narrate & Demonstrate (N&D), Behavior Based Safety (BBS), Foreign Object Damage (FOD),
• Drive the SAESL Operating System and SAESL Enhanced Work Streams (SEWS) to inculcate strong safety culture
• Take on ad-hoc projects / assignments to promote safety culture

Requirements

• Diploma / Degree in Mechanical / Aerospace Engineering
• Good knowledge on regulatory Part 145 requirements, ISO9000 and Nadcap
• Knowledge on data analysis and its tools (Minitab, Power BI etc) will be added advantage
• Qualified Lead Auditor and have experience in conducting aviation safety and regulation audits
• Min 3 years of experience in managing the Quality Management System and Safety Management System

Authorities and Responsibilities

1. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives.
2. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
3. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with customers, production and suppliers to meet the quality requirements.
7. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
8. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
9. Manage the implementation / schedule of calibration control.
10. Participate in the implementation of risk assessment and risk control of medical devices

Competence Requirement

• Preferred to have NTC / Diploma / Degree in Precision / Mechanical Engineering or related discipline.
• Fresh degree may be considered while other educational qualification is required with preferred 3 - 8 years of relevant working experience in related Engineering industry.
• Possess good analytical, verbal, written and interpersonal skills.

Responsibilities:

• Provide sustaining support for deployed fixtures to ensure minimal down time and customer impact.
• Coordinates/Performs test fixture PM and Calibration activities as scheduled and follows-up on OOT issues as required.
• Interfaces with other test engineers and customers to coordinate the deployment of new test fixtures. Begin evaluating, designing and project managing own test fixture projects and solicit assistance as needed.
• Documents and tracks deployment issues to closure and initiates appropriate engineering change request as required.
• Uses basic engineering principles to estimate and reduce test fixture development costs and improve delivered fixture quality;
• Develops and uses test procedures. Assists with the definition of test specifications with design, software, and manufacturing engineering. May assist in the coordination and/or execution of test fixture sourcing activities.
• Gathers operational and test data and evaluates results; may take corrective/continuous improvement actions.
• Evaluates work methods, procedures and policies. Participates in the development and maintenance of new and existing business processes; updates as necessary to ensure current practices are documented.
• Determines root cause and corrective action analysis for issues that arise during design and deployment of test fixtures and provides failure analysis report as required.
• Performs Process Failure Mode, Effects and Criticality Analysis when working with New Product/Fixture Development.
• Stay current with advancements in testing methodologies and technologies within the semiconductor industry.
• Perform other duties and responsibilities as assigned.

Requirements:

• Diploma/Bachelor's degree holder in Electrical, Electronics, Mechanical, or a related field.
• At least 3-year working experience in testing engineering role & Proven experience in test engineering, preferably in semiconductor manufacturing.
• Knowledge in C/C++ Programming, PLC Programming, Java, Functional Tests and Hardware Troubleshooting.
• Strong knowledge of test equipment, data acquisition systems, and testing methodologies.
• Analytical & problem solving skills with attention to details.
• Investigative mind, paying attention to small details and good observer.
• Strong analytical skills, able to identify discrepancies during the test process
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Candidates who are immediately available/ able to start work within short notice will be preferred.

Job Descriptions

· Supports medical device development & manufacturing operations including but not limited to

· QMS/DMR development;

· Root cause investigations for corrective actions;

· Implementation of corrective actions;

· Analyse quality metrics for corrective and preventive actions: and

· Change records and assurance of proper record control.

· Develops test protocols and reports for the validation and/or re-validation of equipment, processes, test methods, and computer systems.

· Develops sampling plans, determines sample sizes, and perform data analysis using various statistical tools including but not limited to regression analysis, t-test, ANOVA, and process capability indices.

· Collaborates with manufacturing engineering, production, purchasing, and quality assurance functions to drive process excellence.

· Technical liaison to external medical device customers.

· Coordinate Internal Audit / Supplier Audit Programme

· Technical reviewer of engineering changes related to product specifications, process parameters, methods and equipment.

· Performs as technical writer responsible for the development of test protocols, test reports, work instructions, and standard operating procedures.

· Assist in maintaining certification and regulatory compliance to ISO 13485, QSR , Medical Device Directive Requirements and any regulatory standards as applicable.

· Supports Quality Assurance in the review, analysis, and reports on process and product performance to management.

· Conduct new employees’ orientation (NEO) training for Quality Management System and 6S for newly joined employees.

· Other ad-hoc tasks assigned by immediate supervisor.

Requirement:

• Minimum Degree in Mechanical/ Mechatronic Engineering.

Experience:

· Minimum 3-5 years relevant experience as a Quality Professional, preferably in ISO 13485 environment.

· Good understanding in the implementation of QMS (ISO 13485), Quality Assurance and Quality Control methodology.

· Regulatory experience in GMP(Good Manufacturing Practice) procedures

Skills :

· ISO 13485 Internal Auditor Trained

· Six-sigma trained with strong engineering fundamentals.

· Strong attention to details and able to work under tight deadlines.

· Ability to multi-task, prioritize tasks and quickly adjust in a rapidly changing environment

· Create quality inspection plans and work instructions for incoming, In-process or outgoing parts to ensure that components and products conform to specifications.

· Define training plan, train QC supervisors, QC technicians and QC inspectors to perform dimensional/functional inspection in accordance to work instructions.

· Perform First Article Inspection for newly inducted materials and parts.

· Perform qualification validation of equipment, processes and test methods

· Ensure the compliance of equipment and tools use during inspection in accordance to Calibration and Preventive Maintenance requirements.

· Participate in Process Failure Mode Effect and Analysis team to mitigate product risk arising from manufacturing

· Perform complaint handling, investigate root cause of complaint and perform Corrective Action and Preventive Action as necessary.

· Handle non-conformances and perform disposition of rejected parts, trend yield and rejects, investigate root cause of non-conformance and perform Corrective Action and Preventive Action as necessary.

· Maintain the manufacturing environment and perform gowning as necessary when working in controlled manufacturing environment e.g. clean room.

· Initiate and/or execute engineering changes in compliance with Engineering Change Control procedures

· Participate in external and internal audit to ensure company quality system is effective

· Participate in continuous improvement programs such as 6S program, yield improvement projects etc.

· Support new production introduction as a team member representing quality

· Perform other tasks as assigned by the supervisor

· Work experience as a quality engineer in a medical device manufacturing environment

(Candidates with Diploma in Engineering. Science or equivalent can be considered for Assistant Quality Engineer position. Candidates with more experience can be considered for Senior Quality Engineer position)

· Experience with qualification validation of equipment, processes and test methods for new product introduction

Occupation

Quality Engineer (Aircraft Engine / Component Maintenance)

Job Description & Requirements

Key Job Accountabilities:

• Liaison with customer reps on documentation procedures including certification and maintenance release.
• Ensure all aircraft have valid documents such as Certificate of Registration, Certificate Of Airworthiness, Radio License, Insurance Certificate, etc as applicable.
• Conduct quality internal audits as scheduled by the Quality Audit Plan or as instructed by the Manager Quality.
• Carry out investigation into incidents, accidents,customer compliants and warranty claims.
• Carry out surveillance inspections at various stages of aircraft work in progress for correct maintenance practices, good housekeeping and proper documentation.
• Assist in the evaluation of new or amendments as appropriate of new or changes to existing contracted operators’ interface procedures.
• Carry out Airworthiness Directives review.
• Monitor and track contracted operators’ surveillance follow up action to closure.
• To consolidate the aircraft surveillance and investigation KPI on the program assigned.
• Any other duties as assigned by the Quality Manager.

Required Experience and Qualifications:

• Hold an Aircraft Maintenance Engineer’s License (AMEL) issued by the civil Aviation Authority of Singapore (CAAS) or a foreign equivalent license recognized by CAAS or an FAA A&P certificate or professional licenses relating to aviation.
• Minimum five years working experience in aviation industry.
• Shall possess Diploma in engineering or equivalent.
• Conversant with Airworthiness requirements and / or Quality Management System (AS9110).
• Able to perform internal and external quality audits is an added advantage.
• Strong knowledge of Microsoft Office applications.
• Excellent verbal and written communication skills.
• Able to work independently and in a team environment

Responsibilities:

• Focus on EASA and CAAS main changes under Direction of ARU Quality Manager to update when necessary.
• Perform internal audits as per internal audit schedule in accordance AS9110C and P-145 requirements
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Manage and update Quality procedures in the Quality Management System.
• Conducts trainings on quality subjects to staff to enhance understanding of subject as per training plan
• Ensure internal production quarantine item are managed timely and accurately
• Validate the qualification of new test equipment, Qualification of New Repair Capability & Qualification of New Test Bench
• Supporting India MRO Project Phase

Requirements:

• Min. Degree/ Diploma in Quality, Quality Management, Engineering or Equivalent
• Experienced in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop
• Experienced in Quality Auditing
• Experienced in Procedural and Process developments
• Knowledge in: AS9110C (ARU) & PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations
• 1 Year Contract position

Responsibilities:

• Focus on EASA and CAAS main changes under Direction of ARU Quality Manager to update when necessary.
• Perform internal audits as per internal audit schedule in accordance AS9110C and P-145 requirements
• Support external audits, (Civil Aviation Authorities, customers and Certification bodies)
• Manage and update Quality procedures in the Quality Management System.
• Conducts trainings on quality subjects to staff to enhance understanding of subject as per training plan
• Ensure internal production quarantine item are managed timely and accurately
• Validate the qualification of new test equipment, Qualification of New Repair Capability & Qualification of New Test Bench
• Supporting India MRO Project Phase

Requirements:

• Min. Degree/ Diploma in Quality, Quality Management, Engineering or Equivalent
• Experienced in Avionics Workshop Maintenance Environment/ Electronics Workshop / Mechanical Workshop
• Experienced in Quality Auditing
• Experienced in Procedural and Process developments
• Knowledge in: AS9110C (ARU) & PART-145 (ARU)

Other Information:

• Working location: Changi
• Working hours: Monday - Friday, 9am - 6pm
• Company transport provided at designated MRT stations
• 1 Year Contract position

About SAESL

A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.

• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL

• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

About this role

Act as delegated technical authority for Engineering and part of Shift Cross Functional Team to review and resolve promptly to ensure operational flow on technical issues/problems/arisings to meet operation requirements or safety, cost, delivery rate and leadtime (SQCD).

Job Description

• HSE – Practice full compliance to Health, Safety & Environmental Standards and meet the expectations of the Zero Harm programme.
• Product Safety – Understand product safety risks and work on mitigation to meet the required safety levels supporting requirements of the Company’s Safety Management System.
• Quality – Perform investigation on Engines/Modules and place part level (including component repair) rejected from service. Produce Technical Summary on strip findings and work performed on Engines and Modules including investigation. Support findings review & provide technical disposition to problems.
• Lean/Improvement – Identify opportunities for new or improved manufacturing processes to meet current or future requirements. Identify, capture and share best practice; capture and utilize lessons learned working closely with Operation & Cell Manufacturing Engineers.
• Lead – Act as Technical Authority for Engineering during the shift using standards set to make quick/prompt technical decisions in relation to the area of accountability.
• Delivery – Manage related technical variances or non-conformances during operational processes (ERRN review & TV request management including PAF).
• Delivery – Review and resolve promptly to ensure operational flow on technical issues/problems/arisings to meet operation requirements.
• Delivery – Workscope creep management control that deviates from standard including Work Instructions clarification.
• Delivery – Support FAIR, MSA and time study activities in shift.
• Test – SAESL Technical Focal for all Test related arising from Customer and the engine OEM as well as with the testbed OEM. Create engine test instructions and support On-Off site Technical Support for Engine test troubleshooting. Support Test Result Analysis and acceptance and if required address Technical Variance arisings.
• Test - Test performance review and drive proactive improvement initiative to reduce RTS/RTT. Support readiness of testbeds in fulfilling new requirements / new product types as well as continued airworthiness and readiness of testbed facilities, equipment readiness in cooperation with the Test Operation Team and the Testbed OEM. Special Test Site Support.

Requirements

• Degree in Mechanical/Aerospace Engineering discipline or equivalent (Candidates with relevant Diploma and work experience will be considered)
• A good team player with good communication skills
• Possess good analytical and technical problem-solving skills
• Required to work on rotating shift work
• Willing to work in Changi

Please apply via our website (www.saesl.com.sg).

Essential Responsibilities:

• Perform audits on Repair Source Substantiation (RSS) packages to verify repair characteristic accountability
• Review RSS audit results to identify trends and coordinate continuous improvement plans to improve NPI quality and first time yield.
• Develop quality system procedures for NPI process to ensure accuracy, compliance and consistency of NPIs delivered by Engineering team.
• Track and monitor post introduction NPIs for quality issues and drive Engineering/Shop for follow up improvements.
• Act as a focal point for all NPI-related queries and clarifications about Quality/regulatory requirements.
• Support conduct of shop internal audit plan as necessary.
• Drive and promote Quality culture and participate in EHS and other shop initiatives as necessary.

Qualifications/Requirements:

• Bachelor’s degree in Engineering from an accredited university or college (or equivalent)
• Minimum of 2 years relevant aerospace experience in repair/manufacturing or a quality assurance role
• Knowledge of general aviation legislation and quality systems (ISO9001/AS9100)
• Good command of written and spoken English
• Basic knowledge of PC software (Microsoft Office)

Desired Characteristics:

• Knowledge of repair/manufacturing fundamentals
• Holds a recognized Lead Auditor or Internal Auditor certification
• Knowledge of Six Sigma quality concepts and tools.
• Knowledge of manufacturing special processes (heat treat, welding, shot peening, coating, chemical processes, non-conventional machining)
• Knowledge of RCCA/HF techniques
• Good initiative and analytical skills
• Six Sigma Green Belt certified.
• Strong attention to detail and accuracy
• Ability to communicate at all levels of the organization
• Demonstrated oral and written communication skills
• Strong interpersonal and leadership skills
• Humble: respectful, receptive, agile, eager to learn​
• Transparent: shares critical information, speaks with candor, contributes constructively​
• Focused: quick learner, strategically prioritizes work, committed
• Leadership ability: strong communicator, decision-maker, collaborative​
• Problem solver: analytica-minded, challenges existing processes, critical thinker

About SAESL
A joint venture between Rolls-Royce and SIA Engineering Company, Singapore Aero Engine Services Private Limited (SAESL) is the world’s largest Maintenance, Repair and Overhaul (MRO) facility for all variants of the Rolls-Royce Trent engines. We are proud to operate our own state-of-the-art engine test facility for engines up to 150,000lb thrust and 140” in diameter.

Since its inception in 2001, SAESL has grown exponentially to become an integral part of Singapore aerospace ecosystem supporting airline customers across six continents. We welcome you to join our ever-growing SAESL family.
• World’s largest Maintenance, Repair and Overhaul (MRO) facility for Rolls-Royce Trent engines.
• Industry’s best turnaround time for Component Repair.
• State-of-the-art engine test facility.
• 1,500 employees supporting customers across 6 continents.

Why Join SAESL
• Staff Benefits (Comprehensive Medical Coverage, Flexible Benefits, Company Transport)
• Training/Career Progression Opportunities
• Job Security

Responsibilities
• Update the Maintenance Organization Exposition manuals, and associate documents.
• Actively drive the Safety Management System and manage the Hazard Identification & Risk Assessment system
• Conduct internal and vendor audits (SMS, SABRe, Part 145 regulations, ISO, Nadcap) to improve compliance
• Actively support external audits (SMS, SABRe, Regulatory Authorities, Customers, ISO, Nadcap)
• Monitor and analyze audit/investigation/voluntary reporting data and identify issues/opportunities for improvement
• Review / support vendor & customer quality questionnaire
• Develop and conduct regulation trainings
• Manage staff authorisation system by reviewing the qualifications and conduct competency interviews for certifying staff & internal stamp holders
• Actively drive initiatives like Narrate & Demonstrate (N&D), Behavior Based Safety (BBS), Foreign Object Damage (FOD),
• Drive the SAESL Operating System and SAESL Enhanced Work Streams (SEWS) to inculcate strong safety culture
• Take on ad-hoc projects / assignments to promote safety culture


Requirements
• Diploma / Degree in Mechanical / Aerospace Engineering
• Good knowledge on regulatory Part 145 requirements, ISO9000 and Nadcap
• Knowledge on data analysis and its tools (Minitab, Power BI etc) will be added advantage
• Qualified Lead Auditor and have experience in conducting aviation safety and regulation audits
• Min 3 years of experience in managing the Quality Management System and Safety Management System

Apply Here --> https://saesl.applyourjobs.com/