Total 1,068 Quality Assurance / Control job vacancies in Jurong East, North East

Responsibilities

• Coordinate with classification society and Brazilian regulatory compliance consultants to achieve the required project deliverables related to classification and regulatory compliance.
• Coordinate and manage FPSO and Project regulatory requirement stemming from regulatory bodies (Authorities, Flag State, Class, etc)
• Lead, coordinate and manage the execution of the Regulatory Compliance Matrix, and other deliverables for FPSO Project.
• Point of contact with project disciplines, Class and Flag state representatives and surveyors while executing Regulatory Compliance Matrix (Class, Flag and Brazilian Regulations).
• Communicate with project team and instill awareness of regulatory requirement.
• Interface with project team, client, Class and authorities during execution of the Regulatory Compliance Plan and Matrix.
• Work with project team to deliver a regulatory-compliant FPSO and ensure Project complies to all applicable regulatory requirement.
• Facilitate the review, identification, and implementation of regulatory requirements along with Classification society and Brazilian Regulatory consultant for inclusion into project design, specification, and project activities.
• Check that documents and reports are in compliance with Brazilian requirements.
• Support the compilation and handover of Dossiers to the FPSO owner.
• Interface with authorities, project disciplines/functions and client reps for acquisition of permits, licenses and consents as needed.
• Establish vendor scope of works for authorities-related approvals, activities and inspections.
• Initiate preparation of all Class-required Manuals and Plans as per regulatory compliance matrix
• Formulate and record Flag state exemption applications and Class Rule deviation applications.
• Champion/expedite closure of Open Class/authorities/Brazilian regulatory comments (Technical and Survey) comments.

Requirements

• Bachelor’s degree in Mechanical, Offshore and Marine Engineering/ or related engineering disciplines
• Minimum 3 years of working experience in regulatory compliance management with good understanding of Brazilian Regulatory requirements in oil and gas projects
• Familiar with terms and standards used in the marine and/or offshore industry
• Good proficiency in English (written and spoken)
• Advanced user of Microsoft Office products
• Some working knowledge and experience in site inspection standards, class rules requirements and industry codes on hull and structure in marine operations (i.e.SOLAS, MARPOL, IMO MODU Code, API Standards and ISO Standards)
• Experience in the design compliance and risk analysis studies in the projects

Our Address and work hours

Seatrium Limited

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 4:30pm/ 6:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Responsibilities

• Assist with the implementation and maintenance of the Quality Management System in accordance with ISO 9001 and 13485 standards, and in compliance with the H.S.A GDP Guidelines.
• Provide support for investigation into non-conformances and customer complaints.
• Maintenance and Follow-up on Corrective Actions and Preventive Actions (CAPAs).
• Provide the trainings and coordinate the trainings for the staff.
• Registration of the trainings into the electronic Quality Management System (eQMS) and running of reports.
• Assist with the documentation review after an operational activity.
• Collection of Temperature Data and Monitoring of the temperature environmental conditions.
• Reporting of day-to-day activities.
• Take care of and communicate with internal and external contacts.
• Control administrational aspects of the facility (e.g. archiving).
• Promote a “quality” culture within the company.
• Performing physical checks for GMP and GDP related processes

Job Requirements

• Possess at least a Diploma in Pharmacy, Life Sciences or relevant fields.
• Possess at least 2 years of pharmaceutical science work experience (or prior Life Science internship experience) is preferable .
• Experience with ISO 13485 standards is an advantage.
• Knowledge of GMP and/ or GDP guidelines is an advantage.
• Able to work in a fast-paced environment
• Work well independently/with minimal supervision and with others in a team
• Proficient in Microsoft Office especially Excel
• Candidate needs to be based in Singapore.

The Position and Description

Founded in 2015 as Molyworks, Continuum is a sustainable metal recycling company, with locations across the United States and in Singapore. Creator of The Greyhound, a patented compact foundry revolutionizing metal manufacturing. The Greyhound eliminates reliance on external supply chains, and enables customized, controlled and internal circularity, unique to each manufacturer’s needs. Continuum deploys Greyhound technology globally to produce a wide variety of metal powders locally.

The Quality Control (QC) lab plays a crucial role in ensuring quality and consistency of incoming and outgoing materials. The successful candidate will manage the lab and quality assurance department for the Singapore plant. Some of the key job responsibilities include:

· Oversee day-to-day lab operations and ensure a laboratory operates smoothly by managing staff, reordering supplies, and maintaining all security protocols and documents.

· Own and update lab-related documents e.g., standard operating procedures (SOP), risk assessments, work instructions, laboratory records, etc. according to Singapore’s Environmental Health Safety and Quality (EHSQ) guidelines, other prevailing regulations, and industry standards.

· Perform laboratory maintenance, audit, and certification/accreditation.

· Identify, implement, and execute inspection, testing, and evaluation methods to ensure incoming materials, products, and production equipment adhere to quality standards.

· Lead quality projects including but not limited to facility certification (ISO9001).

· Develop quality control standard operating procedures.

· Provide technical support to operation and sales team.

Job requirement

· A bachelor’s degree in engineering, chemistry, or another related field.

· A minimum of 5 years of working experience as a lab manager and/or quality manager.

· Familiarity with quality standards and processes.

· Excellent attention to detail.

· Understanding of EHSQ and standard quality systems with respect to lab is a plus.

· Ability to communicate, present and influence credibly and effectively at all levels of management, both internally and externally.

· Proven analytical thinking and decision-making.

· Self-motivated, proactive, hands-on, and able to work autonomously.

· Fluent in English and a second language of choice.

· Singapore Citizen/Singapore PR.

Qualification Requirements: Diploma or Degree in Mechanical Engineering.. Minimum 3 years of experience in Painting. Either; NACE Level II coating inspector or TWI/BGAS grade 2 painting inspector. Familiar with codes ANSI, SSPC, ASTM, NACE, AWWA, ISO, AS etc. Responsibilities: To review Coating Procedure Supervise the Contractor and Subcontractor Activities to Implementation of various Customer Specification during production process To monitoring and Controlling all Contractor and Subcontractor Inspection Activities (Surface preparation Blasting and Painting to ensure and check abrasive, surface profile, coating, environmental and Perform test such as Holiday test, Adhesion test (after the coating process will quantify the strength of the bond between substrate & coating). To review & verify with Client all works completed successfully and ensure that Report/Record as Per Client Specification and Fabrication Procedure. Controlling and Evaluating all the Quality Control activities during all the painting activities To Control Calibration Interval, Calibration Status and InHouse Calibration of Equipment o Final Inspection coating prior shipment. To review & compile All Field Blasting and Painting Record for Manufacturing Data Report (MDR) or Project Documentation for turn over document to Client.

Responsibilities

• Good knowledge of all international surface preparation standards, painting/coating application standards, inspection standards, contract, specifications, material technical data sheet, material safety data sheet, documentation etc.
• Witnesses prequalification of painting system, painter, blaster and adhesion testing subjected for project approval before commencement of painting activities.
• Coordinates in-coming coating materials (e.g. paints, thinners, abrasives etc) conditions, data sheet and batch certificates in accordance with project.
• Inspects correct type of blasting equipment and tools to be used to meet the paint quality according to the paint specification.
• Inspects pre-cleaning or solvent cleaning of surface, metal surface imperfection/defects, surface profile of blast cleaned surface using right inspection tools.
• Assesses surface cleanliness soluble salt contamination on blast-cleaned surface and related test such as pull-off test & reports.
• Handles painting inspections in blasting and painting inspection of tank coatings, ship hull painting, and structural items
• Coordinates Request for inspection (RFI) to third party and client paint inspectors on hold point and witness point as per project inspection test plan (ITP).
• Sends enquiries to Paint manufacturers for Painting Specification in accordance with project Requirements and Secure Quality document for painting; Inspection & Test plan, blasting and coating procedure.
• Ensures calibration certificates of painting instruments are valid & available for reference
• Supervises the workplace and workers safety.
• Ensures coating is practical and in accordance with the specified requirements by preparing or reviewing drawings, specification, job instruction and material selection notes etc.
• Reviews Inspection Test Plan (ITP) as per project specification and procedures
• Coordinates and perform Coating inspection of structural, piping and outfit works etc. of the assigned project as per approved ITP.
• Monitors all painting/coating related works and ensure all final products meet project specification requirement.
• Conducts surveillance inspection of surface preparation, paint mixing, WFT, DFT adhesion and curing of paints.
• Coordinates with yard QA/QC team for all quality documentation submission to SCM with the construction completion.
• Conducts onsite audit as per relevant specification and customer requirement.

Requirements

• Degree or Diploma in Mechanical Engineering / Marine and Offshore or equivalent.
• Minimum 5 years of relevant work experiences in shipbuilding / oil and gas / offshore projects as Coating Inspector.
• Working in FPSO/FSO/FPU Project will be added advantage.
• NACE Level II/III or FROSIO Level II/III or ICORR Level II/III or equivalent.

Our Address and Working Hours

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Summary:

In this role you will perform documented inspections in the verification of conformance of parts to applicable drawings, procedures, specifications and all applicable statutory and regulatory requirements. The QC Inspector is responsible for the content of the Inspection Test Plan (ITP) and project quality plan according to customer’s and Flowserve’s specifications and international standards. Besides, the QC Inspector is responsible for defining, advising and controlling all project required QC documents. The QC Inspector reports directly to the QC Supervisor/Manager.

Responsibilities & Requirements:
- Documenting dimensional and visual inspections to the drawing or applicable procedures
- Documenting non-conforming material utilizing an NCR (nonconforming materials) process
- Reviewing and verify internal and external qualifications of suppliers, welders, NDE personnel with regard to Non-Destructive Examinations (NDE), welding procedures and/or other applicable requirements.
- Reviewing and approve supplier’s manufacturing and testing documents/procedures and to take care for approval (when required) of these documents by the customer, his customer and the authorized inspection body
- Preparing and define test and inspection requirements for the required projects such as ITP and procurement specifications

- Performing diagnostic calibration and generate report for submission

- Processing final inspection report and attached with required documents for submission.
- And any other duties assigned

Preferred Experience / Skills:
- Knowledge of welding, NDE and quality systems. With NDE certification is a plus.
- Knowledge of the established quality standards, laws and regulations of national and international authorities
- Must have knowledge of inspection equipment generally found in machining, assembly and test operations
- Effective utilization of CMMs is a plus
- Flexible, eager to learn, accurate, analytical with positive, can-do attitude
- Flexibility and willingness to travel
- Good interpersonal, communication, negotiation, analytical and presentation skills
- Problem solving skills
- Operational Excellence & High Level of Customer Service Standard
- HS Diploma / GED and / or 0-2 years relevant experience

Responsibilities

1. Primary point of liaison for service management of assigned customers.

2. Escalation management, able to analyze and identify root causes on service issues to ensure corrective and preventive actions are implemented effectively.

3. Work with Data and Process team to streamline processes and support for further improvements.

4. Present Dashboard reporting, daily shipment planning and shipment status update regularly.

5. Own and develop the regional relationship with the customer and defuse any tension that may arise and escalate accordingly when needed.

6. Track the performance of the whole network for the assigned account.

7. Follow up closely with Operations / Origins / Destinations to rectify the data issues or missing EDI transmissions till complete transmission.

8. Attend to queries from Customer, Operations / Entities on inbound and outbound with regards to events/milestones and deviation with reason codes.

Authorities

1. Execute control tower initiatives.

2. Ensure adherence to established work standards and work processes.

• Support QA to check non sensitive incoming item. This includes physical checks of item against delivery document, check item conformance to design specs (simple) and handover checked items to warehouse.

Requirements:

• physically abled as physical work is required.
• able to read and write in a English as staff is expected to perform simple checking, measurement and indicate in forms.
• Candidates must be willing to travel between 249 Jalan boon lay and 24 penjuru road to work if required.
• 5 Days work
• 7:30 am - 5:15pm

please WhatsApp to wa.me/98679829 or wa.me/96516081

The Quality Assurance Specialist is responsible to:
- Maintain and ensure effectiveness of the Quality Management System in Singapore,
- Perform product complaints handling for Singapore,
- Perform Adverse Events reporting to local regulatory authorities of Singapore,
- Perform Field Safety Corrective Actions and reporting for Singapore.

Responsibilities:

• Quality Assurance for all aspects of the Quality Management System (QMS) of Singapore Distribution Centre (DC), including maintenance, continued compliance, and certification.
• Ensure quality and regulatory compliance to relevant applicable standards such as GDPMDS (Singapore)

• Be responsible for operational quality matters including product hold in Singapore.

• Act as the Complaints Handling unit for Singapore.
• Conduct training of staff in QMS to ensure relevant staff are trained to the latest revision of procedures.

• To perform assessment and adverse event reporting to local authorities of Singapore.
• Execute Field Safety Corrective Actions (FSCA) in Singapore, including reporting to local authorities.

• Manage outsourced activities to ensure vendors meet the Cook Medical's quality standards.

• Coordinate or investigate CAPA to ensure nonconformances are addressed effectively.

• Schedule and perform internal audits. Host or support external audits.

• Perform trending and produce metrics for DC performance, measuring against key performance indicators.

• Maintain up-to-date knowledge and compliance with Global policies and procedures and to implement locally.

• Participate in global projects and meetings if applicable.

• Act as the local contact person for Data Protection facilitation.

• Perform other tasks assigned by Manager.

• Have a sound understanding of, and comply with, the COOK Code of Conduct and Company Compliance requirements.

Requirements:

• At least 3 years working experience as quality assurance in the medical device field.

• Degree in Science, Engineering or other related discipline.
• Experience in adverse event assessment and reporting for Singapore.
• Experience in Field Safety Corrective Action execution and reporting for Singapore.
• Experience in multinational medical device company preferred.

• Excellent communication and interpersonal skills, able to work with people from different levels internally and externally.
• Excellent time management and organizational skills. Able to perform duties with limited supervision and meet deadline.

• Fluent in English (both spoken and written).
• Skilled in document management.
• High level of computer skills including Microsoft Office.
• Multi-tasks and able to prioritize the job tasks, depending on the urgency.
• Positive attitude, be good team player and attend to details.

Primary Objectives of Position:

Ensure products are in compliance with regulatory requirements and provide technical support to stakeholders pertaining to regulatory affairs.

Major Responsibilities:

1. Monitor, update and maintain global food additives / flavouring related legislatons and regulatory requirements.
2. Maintain & support and liaise with certification bodies in the renewal and new applications of products or raw materials religious certifications such as Halal & Kosher Certificates.
3. Provide assistance regulatory compliance audit actitivites.
4. Provide technical support pertaining to regulatory affairs:

• Advise internal stakeholders on the compliance and suitability in accordance with food / additive/ flavouring legislations on day-to-day enquiries/ new projects
• Analyse and update the suitability of new ingredients introduced for projects.
• Manage and provide support to internal/ external stakeholders on products’ technical enquiries/questionnaires/ forms through online portal or emails.
• Administer the provision of products’ declarations and questionnaires in accordance with company policies and best practices.

Required Skills:

• Degree/Diploma in Food Science / Food Technology, Chemistry or equivalent
• Meticulous, detailed and organized
• Well verse in Microsoft environment (MS Office – Word, Excel, PowerPoint, 365 etc.)
• Good understanding of the global framework of Food Laws & Regulations
• Good communication and coordination skills with high attention to details
• Analytical and abreast of new policy changes pertaining to regulatory affairs
• Basic understanding of halal / kosher requirements
• Demonstrated commitment and understanding of food safety and quality principles

Other information:

- Working days is from Monday to Friday, 8:30am - 5:30pm

- Frequent transport services from/to Lakeside MRT and Office

We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunities of working for one of the world’s largest providers of products and services to the global energy industry.

Job Scope:

Plans, reviews, and analyzes quality-related data. Identifies problems, offers resolutions, and performs reporting activities. Conducts statistical studies using Statistical Process Controls and other Quality Improvement Process tools. May implement a Quality Assurance and/or Quality Management System such as ISO 9000, API, ASME, etc. for the site or project. May act in vendor surveillance activities on projects.

COMPANY DESCRIPTION

As Singapore’s leading supermarket retail player and a household name close to all, we have grown with you over the years. It is now your turn to grow an exciting new career and fulfil your aspirations with us. Join us as we embark on a journey to make lives better for our customers, community, environment and employees.

At NTUC FairPrice, we offer you more than just a job. We are committed in giving our employees a rewarding career through comprehensive development opportunities. We promise a wonderful workplace culture with ample opportunities for growth at different levels of your career. Every of our 10,000 employees across Singapore is important.

If the prospect of working in an organization at the forefront of retail technology and innovation excites you, look no further.

Grow your career with us today and make a difference.

RESPONSIBILITIES

The incumbent is responsible for and he/ she is expected to

• Perform QA/QC work primarily at our Fresh Food Distribution Centre. 
• Perform sensory and instrumental testing of fresh produce.
• Conduct quality audits of supplier and branch for QA compliance.
• Conduct research study into product quality parameters.
• Conduct routine hygiene check at warehouse facility
• Preparing quality & feedback reports, presentation materials etc.
• Assist the Executive/Manager to administer other related QA programs.

• Diploma in Food Science/ Food Technology/ Microbiology/ Biotechnology/ Chemistry or its equivalent.
• Preferably 1 – 2 years of relevant work experience in quality assurance work and professional knowledge in ISO 9001, ISO 220000 or HACCP, etc.
• Candidates without diploma qualification but with relevant experience are welcome to apply.
• Motivated, meticulous and results oriented
• Resourceful and problem solver
• Excellent interpersonal and communication skills
• Team player and ability to collaborative and work effectively with a variety of stakeholders, etc

• Work location: Upper Thomson Road and Sunview Road 

Job Responsibilities

• Manage and implement document control activities
• Audit and assure that manufacturing processes are capable of producing products that conforms to established requirements
• Manage non-conformance issues and implement actions to prevent recurrence
• Follow up on corrective actions to ensure quality issues are addressed and resolved
• Responsible for customers’ quality audits and inspections
• Prepare QA reports
• Ensure products meets customers’ requirements
• Conduct internal audits and enforce ISO Quality Management system within the organization

Requirements:

• Diploma / Degree in Quality Assurance, Mechanical, Electrical/Electronics engineering or equivalent with relevant experience
• Knowledge in ISO 9001, CP/CPK, SPC and 8D reporting will be advantageous
• Good attitude towards acquiring new knowledge
• Able to work under pressure and tight datelines
• Self-motivated and able to work independently
• Good communication and interpersonal skills

Job Description

• Perform dimensional control inspection of module structure, piping, Tie in point coordinates, equipment, Flange face out using total stations and BEST FIT software
• Advise construction team on construction sequence, installation, and appropriate rectifications based on Dimensional tolerance
• Coordinate with Client inspectors for dimensional control inspections as per Inspection and test plan.
• Generate dimensional control reports and get it approved from clients
• Ensure periodic calibration of survey equipment
• Alignment, position and elevation control for the steel structure and pipeline
• Preparing a dimension inspection report for before welding and after welding

Job Requirements

• Min 3 years experience in dimensional control inspections using total stations
• Working knowledge in AutoCAD
• Understanding of Structural & piping ISO drawings
• Familiar with usage of Leica & Sokkia total stations and using dimensional control software such as BEST FIT

Description

The QC Inspector is responsible for the quality levels of field works such as civil, tankage, piping, equipment, steel structures, electrical and instrumentation etc.

Responsibilities

• Interpret construction and technical drawings.
• Communicate engineering/technical/quality requirement to team individual.
• Verify that incoming materials meet the requirement
• Acts as an internal independent party for the verification of quality welds and ensure that incoming materials meet with specifications.
• Inspection at vendors shop facilities and work-sites, on fabricated pipes, steel structure, blasting, painting works, galvanizing or other installation works per ASME and ANSI codes, including verification of tests at their premises.
• Check for weld joint preparations, fit-up alignment, dimensional tolerances and visual check on weld.
• Liaise with NDT sub-contractors for radiography test, etc.
• View and interpret radiograph films before review by client inspectors.
• Follow-up on corrective action of non-conforming products.
• Prepare and compile inspection reports, non-conformance reports and other quality control.
• Monitor welders’ performance and the welding procedures to check for compliance.
• Witness and verify the welding procedures qualification tests and welders’ performance qualification tests.
• Implement and monitor proper storage, handling and usage of welding equipment and welding filter rods.

Requirements

• Diploma in Engineering or equivalent
• Minimum 2 years in Inspection and Quality Control for Oil and gas industry.
• Certified Welding Inspector preferably
• Experience in Inspection, Quality Control, testing and commissioning works of Construction for Power, Oil and Chemical Plants

Who We Are

AETOS is a purpose driven organization – securing our future for our families, our communities and our clients. We are anchored on strong fundamentals and values by going fast, going together and going beyond. Our People are our key enablers and we are committed to investing in their personal and professional growth. While security is our core business, we are solving real challenges by leveraging technology and integrated solutions that unify safety, security, facilities management (FM), sustainability and much more.

What Make Us Unique

We stand out by how we value our people – through learning and development. Our organisation is built on a culture of ownership, an environment of trust and a commitment to go the extra mile for our clients. We are firm believers that success is never achieved alone but through collaboration, teamwork and a common purpose.

Who We Are Looking For & What Role You Will Play

• Maintain database of legal documents (E.g. contracts with customers, teaming agreements.)
• Assist in proofreading a wide variety of contracts and other agreements.
• Assist the Legal, Risk and Compliance team to ensure effective communication, implementation and compliance of the Enterprise Risk Management Framework.
• Assist LRC Manager in the consolidation of ERM dashboard for reporting, including but not limited to, operational risks, business risk and financial risk etc.
• Liaise with other departments and external parties where necessary.
• Other related tasks assigned from time to time.

What Knowledge & Experience We Require From You

• Diploma/Degree (preferably in Legal/Accounting) in with a minimum of 1 year of relevant working experience.
• Excellent problem-solving and analytical skills, with the ability to work in a cross-functional, fast-paced environment and lead/drive complex operational initiatives.
• Meticulous, attentive to details, organized, and committed to delivering high-quality work.
• Able to prioritize assignments, multitask, and work in a dynamic environment.
• Proficient with MS Office applications.
• Strong command of English (Ability to read, write and edit technical subject matter).
• Excellent communication and interpersonal skills.

Control Engineer

Main Responsibilities

• Responsible to assist in the design of controls system and programming to meet the budget and time expectations of the project.
• Able to Modify controls design and other documents according to the Standards and compliance to industry standards as according to project specification.
• Develop specific program per customer and project requirements.
• Knowledge in Allen Bradley, COMAP and Siemens-S7 programming.
• Knowledge in instruments, control valves and shutdown valves troubleshooting.
• Knowledge in various industrial communication protocols like MODBUS, Ethernet etc.
• Knowledge in control panel design as per project requirement.
• Participate in controls and validation activities, conduct test and debug, FAT and SAT.
• Work together with the Customer, Process engineer, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Ability to communicate in an open, clear, precise and effective manner.

Requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent;
• Minimum 3 years of related work experience in oil and gas industry.
• Must be able to travel as requested.
• Must be available to work overtime.
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment.
• Well organized and respectful of project deadlines.
• Positive attitude.
• Target and result orientation.

We are seeking for Pest control technician / supervisor to join our team!

Contact Mr Avi @ 91383851 for an interview!

Job description:

• To carry out pest control inspection at client premises
• To carry out pest control treatment e.g. fogging, spraying and baiting
• To design pest management plan according to site situation
• To carry out follow up on pest issue until problem solved
• To submit service report promptly
• To attend pest complaint at client premises as instructed
• To provide good quality service to customers
• Provide feedback to management and client for any pest infestation, irregularities, improvement action (housekeeping/ proofing), etc.
• Ensures the safety operation of pest control equipment and use of chemicals
• Able to travel from place to place to conduct pest control activities
• Required to work outdoor at times

Working hour:

Mon to Fri 8.30 to 5.30pm / Sat 8.30am to 1230pm

Salary Range:

$1700 to $2700

Job Requirements

Attributes

· Ability to work in a team

· Attention to detail and accuracy

· Communicate well with customers to build strong customer relationship

· Ability to manage time and complete all delegated tasks efficiently

· Excellent knowledge of Singapore road with good driving record

Requirement

· NEA Technician License ( those with no license and experience may also apply)

· Min NITEC

· Class 3 Driving License ( preferred but not a requirement

The Quality Compliance Study Lead has the overall responsibility for onboarding new customers and ensuring QP Services activities are successfully delivered in clinical trials of new drug products. The Study Lead is the primary point of contact for stakeholders within Almac and clients.

Responsibilities

• Act as a principle contact for the customer requiring QP Services, keeping up to date with Clinical Trial legislation and providing expert advice in a consultancy capacity.
• Lead the QP Services activities at all stages, coordinating tasks and ensuring completion in line with the timelines agreed.
• Liaise internally within the QP and other internal departments globally to ensure the timely delivery of QP Services activities.
• Advise on QP related activities and responsibilities during the generation/revision of Technical Agreements.
• Escalate issues when appropriate.
• Record, collate and report customer specific KPIs, agreeing and implementing performance improvement plans where necessary.
• Follow through on all customer queries in a timely manner.
• Host /attend internal/external teleconferences/meetings, initiating QP related discussions for new or ongoing business, taking minutes, as required.
• Represent the QP Services Department during customer audits and sales visits, promoting Clinical Services expertise in Qualified Person related activities, in the generation of new or on-going business.

Criteria

• Bachelor’s Degree
• Experience with project management or facing clients in the pharmaceutical industry
• Excellent communication and stakeholder interaction skills
• Flexible
• Chinese or Japanese language skill are advantageous for interacting with Chinese or Japanese clients

Please note that the official title in the job offer may differ from advertised.

PRINCIPAL ACCOUNTABILITIES

QC Inspector will work closely with Supervisor/Lead to complete the daily assigned tasks (incoming inspection, in-process inspection, NDT inspection and final/outgoing inspection). Conducting inspection on various stages of the inspection to ensure the products fulfill the required quality as given in the production requirements.

JOB RESPONSIBILITIES

1. Perform incoming material inspections as per the appropriate Work Instruction (WI).

2. Perform correctly the daily in-process and final inspection of the product in accordance with the Quality Procedure (QP) and WI.

3. Ensure material/component traceability (router sheet) is maintained throughout the manufacturing process.

4. Ensure to clock in/out (VM) and update the router sheet correctly.

5. Ensure only calibrated and validated equipment/measuring devices are used in the inspection processes.

6. Report to the Supervisor/Lead on any non-conformance(s) detected during inspection.

7. Ensure repaired/reworked items are re-inspected before releasing the product for further processing or delivery.

8. Prepare and complete inspection records prior to shipment to customers.

9. Perform any ad-hoc duties as and when assigned by superior.

10. Support in the orientation of new recruitment for the quality team by providing on-the-job-training and sharing the company culture and practice, and method of inspection, etc.

11. Ensures 5S is implemented in the work area.

12. Adheres company’s guidelines with regards to Safety and Quality.

13. Complies to Company Code of Business Conduct.

14. Support and participate in company-wide or departmental programs such as:

· Total Quality Management, Lean Manufacturing

· Social Activities

REQUIRED COMPETENCIES

1. Must complete minimum training required specified in Employee Qualification and OJT Form No. S 1-026F.

2. Ensures Accountability – holding self and others accountable to meet commitments

3. Self-development – shows personal commitment and takes action to continuously improve. Accepts assignments that broaden capabilities

4. Action Oriented – display a can-do attitude in good and bad times. Steps up to handle tough issues.

5. Knowledge of ISO9001, Quality Management System, Quality Control and usage of measuring devices/tools.

6. Preferably knowledgeable in LDP (Liquid Die penetrant or Non destructive testing).

QUALIFICATION GUIDE

1. Education : NITEC/ O or N Levels

2. Experience : At least 1-2 years of working experience in fast-pace Manufacturing environment (preferably Oil and Gas manufacturing)

3. Communication : Able to communicate in (read, write, speak, listen and Understand) simple English and Mandarin.

: Good interpersonal skills

4. Physical : Has to be physically fit (with good eyesight)

5. Working Condition : Shop-floor Environment. Able to work rotating shift and overtime on weekdays, weekends and sometimes public holidays.

Responsibilities:

• Coordinates with Project Director (PD), Project Services Manager (PSM), Commercial and Overall Delivery Manager for Topsides Fab Yards Contractual deliverables.
• Coordinates with with Topsides Delivery Manager (TDM) on respective Fab Yard matters.
• Coordinates with PD, PSM & TDM on correspondences with respective Fab Yards.
• Supports PD, PSM, TDM, Commercial Officer / Costing Officer for Variation Order/Claim with respective Fab Yard.
• Coordinates with Equipment Package Manager to monitor and track equipment/bulk deliveries.
• Coordinates with Petrobras Team visit to Fab Yard/Site (Overseas – China / Brazil).

Requirements:

• Bachelor’s degree in any Engineering discipline or equivalent
• Minimum 5 years relevant project control manager work experience with FPSO projects is required for this position.
• Possesses good communication and interpersonal skills.
• Able to work independently.

Our Addresses and Working Hours:

Seatrium Limited

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 4:30pm/ 6:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Coordinates with Project Director (PD), Project Services Manager (PSM), Commercial and Hull Delivery Manager (HDM) for CIMC Contractual deliverables.
• Coordinates with HDM on CIMC matters.
• Supports PD, & HDM on correspondences with CIMC.
• Supports PD, HDM and Commercial Officer & Costing Officer for Variation Order/claims with CIMC.
• Coordinates with Equipment Package Manager to monitor and track equipment/bulk deliveries.
• Coordinates with Petrobras Team visit to Fab Yard/Site (CIMC).

Requirements:

• Bachelor’s degree in any Engineering discipline or equivalent
• Minimum 5 years relevant project control manager work experience with FPSO projects is required for this position.
• Possesses good communication and interpersonal skills.
• Able to work independently.

Our Addresses and Working Hours:

Seatrium Limited

Tuas Yard

51 Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Fri: 7:30am - 4:30pm/ 6:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Commissioning, Qualification & Validation (CQV) Engineer

12 months contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission.

Job descriptions:

• Perform Commissioning, Qualification, Validation team activities with a direct regard for Safety.
• Generate Commissioning & Qualification (C&Q) Procedures for projects.
• Review/qualify lab equipment – Isolator experience is advantageous.
• Writes, review and revise a variety of Installation, Operation and Performance qualification/verification related documents, including any of all of the following: SOPs, validation/verification master plans, guidelines and execution plans
• Facilitate scoping / planning of commissioning spares and consumables.
• Deliver the C&Q activities as required to meet the schedule
• Track progress of C&Q activities as required.
• Execution of Design reviews, shakedown, commissioning, Factory Acceptance Test (FAT's), Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualification (PQ) activities.
• Coordinate with project contractors and equipment vendors to execute required tests.
• Allocate project resources for efficient execution of project deliverables.
• Coordinate support during C&Q execution

Job Requirements:

• Min 6 years of Computer System validation, qualification, and commissioning experience
• Experience with validation of equipment controlled by PLCs, BAS/BMS systems, DeltaV, and other typical automated system platforms preferred.
• Experience in the pharmaceutical industry

Reg No: R22104540

EA License no: 94C3609

Job Description:

Spare Parts

· To deliver spare parts service to internal and external customers within the Service level agreement (SLA)

· To monitor processes & procedures for service parts operations such as advanced / standard replacement, repair & return, analysis and return process

· To monitor and make sure all the loaned parts to customers and engineers were return according to procedure

· Involve in customs, freight matters e.g. freight bill negotiation / verification, reviewing freight rate and shipping company for all the international inbound / outbound shipment

· To monitor and manage the performance of outsources / non outsourced service logistics operations to ensure service is delivered within KPI

· Guarantee service parts stock data accurate, reduce the company assets safety risk and standardize the service parts management operations

· Achieve KPI set by Management e.g. On time service delivery, Inventory Turnover Rate and maintain spare part stock accuracy.

· Monthly reporting e.g. inventory, borrowing, repair & return, analysis reports

Quality & Operation

· To audit quality of safety security domain and improve network change quality

· Communicate and audit engineers to ensure engineers comply with the network change process and KCP as well as D&S Cyber Security Management Requirements

Job Requirement:

· Diploma or bachelor degree in warehouse / inventory management for spare part position

· Min. 1 year relevant experience in warehouse / inventory management is preferred

· Excellent organisational skills

· Good interpersonal and communication skills, able to interact with internal / external customers

· Need to be able to travel within Singapore to different offices / warehouse

· Good command of English and Chinese is required to be able to communicate with various speaking business associates

· To be able to work independently and make skillful decisions

Citi’s Global Legal Affairs and Compliance (GLAC) empowers and protects Citi by providing legal, compliance, investigative, and security services to our firm. We manage compliance risk, provide legal analysis and advice, protect Citi’s people and businesses, advocate for legal and regulatory outcomes that benefit our firm and our clients, and ultimately promote behavior that is consistent with Citi’s mission and culture.

The Execution Intermediate Analyst is an intermediate position responsible for performing risk and compliance reviews in coordination with the broader Anti-Money Laundering (AML) team. The overall objective is to utilize in-depth AML knowledge to review, analyze and conduct effective due diligence and investigations on higher risk cases that may be a potential risk to Citi.

Responsibilities:

• Conduct investigations and research on potentially suspicious clients using various internal and external systems and databases
• Conduct Cross Sector reviews among multiple Citi business lines.
• Document and report the review/investigation findings and prepare case files with the required supporting documentation
• Summarize, in writing, clear and concise findings of the investigation
• Advise senior management on next steps and provide recommendations on the next course of action (relationship retention, termination, Suspicious Activity Report (SAR))
• Manage risk by analyzing the root cause of issues and impact to business
• Has the ability to operate with a limited level of direct supervision.
• Can exercise independence of judgement and autonomy.
• Acts as Subject Matter Expect (SME) to senior stakeholders and /or other team members.
• Appropriately assess risk when business decisions are made, demonstrating particular consideration for the firm's reputation and safeguarding Citigroup, its clients and assets, by driving compliance with applicable laws, rules and regulations, adhering to Policy, applying sound ethical judgment regarding personal behavior, conduct and business practices, and escalating, managing and reporting control issues with transparency.
• Participate in industry project where assigned

Qualifications:

• 2-5 years’ relevant experience
• Knowledge of AML regulations preferred
• Proficient in Microsoft (MS) Office
• Excellent verbal and written communication skills
• Demonstrated analytical skills

Education:

• Bachelor’s/University degree or equivalent experience

This job description provides a high-level review of the types of work performed. Other job-related duties may be assigned as required.