Total 1,114 Quality Assurance / Control job vacancies in Woodlands & Tuas, North West

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

Provide recommendations and timely updates on equipment degradation problems.

Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

Preparation of final inspection reports with all findings, abnormalities and recommendations.

Ensure quality of inspected items to meet project requirements and standards.

Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Read, understand project related ITP, procedures, specification requirements.

Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

Knowledge in welding inspection

Eligibility Criteria

Graduate Engineers with 3-6 years of relevant experience.

Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

Experience in Refinery and Oil & Gas must

Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

Work Independently and can work in Singapore and other countries.

Fluent Reading, Speaking and Writing in English.

Willing to commit 24 months contract/ project completion.

Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

Energetic & Result Orientated.

Reporting to Director, IT, this role will be responsible for IT Security, Risk & Compliance of the company.

Responsibilities:

• Assist in driving the evaluation & implementation of IT Security projects
• Advising on implementation and operation of information security controls
• Assist in coordinating or conducting information security awareness programs
• Contributing continuously to improve the ISMS
• Assist in developing and driving compliance/governing framework for the ongoing compliance against the organizational
• Review IT systems to ensure that the IT & Data control measures are in place and comply with • organization's standards
• Review and ensure the SoD framework is upheld and strictly adhered to

Requirements:

• Degree in Technology or any similar fields
• Minimum of 5 years’ experience working in IT department, dealing with Information Security
• Proven supervisory experience
• Experience in handling SOX compliance audit related activities, including coordinating internal tasks
• Ability to communicate effectively with all levels of personnel including senior management level
• Excellent communication (both oral and written)
• Familiar with SAP GRC/ Soterion GRC tool will be added advantage

Interested candidates are to submit a detailed resume to speed up the application process.

Only shortlisted candidates will be notified. Thank you for applying.

Video

(optional)

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Quality Systems

• Supports overall maintenance of quality systems
• Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team
• Maintains the Mastercontrol and ISO document control system
• Maintains customer related documents such as Quality Agreement, PPAP
• Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

• Ensures effective implementation of all company quality policies
• Implements ISO and other recognized standards
• Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.
• Sets, communicates, and implements quality objectives in line with business goals
• Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.
• Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.
• Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

• Leads ISO quality standards implementation as Management Representative.
• Conducts and leads quality audits to specific quality standards.
• Leads customer related audits
• Conducts supplier audits
• Conducts internal audit investigations for product quality and process issues
• Responsible for ensuring timely resolution to audit findings

Training

• Provides training for all employees on basic quality and statistical concepts
• Provides training to appropriate personnel for updates and changes to quality policy
• Attends relevant external training sessions/courses and shares learning internally

We are searching for a dynamic Technical Project Manager to lead our platform team in developing and delivering next-generation solutions. This role requires a strong background and deep understanding of web3 technologies, Hadoop and blockchain protocols.

Responsibilities

• Define and communicate a clear product vision aligned with the company's objectives and market trends.
• Provide technical guidance and expertise to cross-functional teams, ensuring successful execution of product initiatives
• Implement agile methodologies and best practices to streamline development processes and accelerate time-to-market
• Conduct market research and competitor analysis to identify opportunities for differentiation and innovation.

Requirements:

• Strong technical background in computer science or software engineering, with experience in managing complex systems.
• Deep understanding of web3 technologies, including blockchain protocols, decentralized applications (dApps), and smart contracts.
• Proven track record of working effectively with engineering teams, both internally and externally, to deliver high-quality products on time and within budget.
• Excellent communication and interpersonal skills, with the ability to articulate technical concepts to non-technical stakeholders and engage with the Web3 community.
• Involve in writing Map Reduce jobs and giving input to HDFS for further processing.
• Responsible for data movement from client library and relation database to HDFS using Sqoop.
• Writing Pig Latin scripts and HiveQL.
• Managing and deploying on Hbase on Pseudo distributed cluster
• Experience across range of technologies/platforms/tools – Cloudera Hadoop, Spark, Hive, YARN, HDFS, MARIADB, Spark Streaming, Kafka, Spark SQL, Zeppelin, Grafana

RESPONSIBILITIES:

• To advise management on relevant Acts & Legislation pertaining to environmental and health
• Monitor to air, water (ECM) noise pollution, waste management and vector control issues
• Liaise with license pest operator or agent
• To monitor noise readings and advise management accordingly
• To conduct regular site inspection, particularly on ECM, perimeter drainage system, silt facilities, poor housekeeping that will encourage pest breeding, workers living and cooking condition, sanitary facilities etc.
• Together with health supervisor to discuss findings & recommend measures to the occupier to correct non-compliances and verification of action taken
• Prepare fortnightly report to management on Environmental control
• To act according to what is stipulated in the company’s environmental programme, conduct review and make recommendation for improvements
• Conduct investigation on industrial diseases, pest infested area and implement measure to stop its spread & prevent recurrence
• To liaise with relevant authorities on environmental & health issues
• Implementation of departmental procedures to comply with ISO 9001; 14001; OHSAS 18001 standard requirements, documented procedures as well as client, companies, authorities’ requirements
• Any other related duties assigned by superior from time to time

Requirement:

• Must be registered with NEA

Summary of Role

We are looking for a Technology Quality Engineer to join our team as part of the Global Quality team. The successful candidate will work with the TRB GPO (Global Process Owner) Lead to strategize, develop, implement, monitor, and improve Technology Development & Process Transfer related business process across the organization.

Your Job:

• Accountable for effective execution of the TRB (Technology Review Board) business process at our fabrication (Fab) sites to enable flawless execution on technology development and process transfers.
• Work with TRB Quorum and stakeholders which includes the project team, technical leads, subject matter experts (SMEs), management for technology development and process transfers.
• Validate the technology development and process transfer deliverables against predefined criteria.
• Active engagement with the Fab(s) project team(s) to utilize quality methods and best practices to enhance the overall quality/scope, speed/schedule and cost of technology development/transfer projects and ensure flawless execution through risk-based thinking.
• Proactively work with peers, SMEs, stakeholders and drive risk-based thinking and agreement on continual improvement plans.
• Collaborate with Global Process Owner (GPO) and cross-functional teams to ensure alignment of quality assurance initiatives with overall business objectives, meet compliance requirements and drive towards TRB process excellence.
• Monitor and analyze TRB KPI data to identify trends and opportunities for improvement, and work with business functions to implement corrective actions.
• Develop and deliver training programs to build a culture of quality and continuous improvement across the organization.
• Collaborate and communicate process changes to stakeholders and leadership.
• Represent as interface to global TRB process at local Fab certification audits

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications:

• Bachelor’s Degree in Engineering or Science; Masters/PhD
• 5-8 years of work experience in or across semiconductor process technology, R&D and/or Process Transfer Projects, Module Engineering, Design Enablement, Device Engineering, Reliability, or related domains
• Fast learner, strong analytical and problem-solving skills, with the ability to analyze data and identify trends and opportunities for improvement.
• Excellent communication and interpersonal skills, with the ability to build strong relationships with business functions and stakeholders.
• Self-starter with the ability to work independently and as part of a team.
• Language Fluency – English (Written & Verbal)

Preferred qualifications:

• Hands on experience on problem solving/troubleshooting skills
• Working knowledge of ISO9001:2015/IATF16949
• Certified IATF/ISO/VDA Auditor is a plus
• SAP-QM working experience is a plus
• Work experience with multi-national and cross functional environments
• Possess the right attitude to get results with a Growth Mindset

Summary

The Quality Assurance Engineer (QAE) provides guidance, expertise, and services to ensure process and product quality of instrument products. The QAE supports compliance to the ISO 9001 quality system; internal auditing; material, process, and production controls; and other aspects of quality assurance to ensure compliance to standards, regulations, and guidelines. The QAE works cross-functionally with R&D to support new product introduction; with Manufacturing to create and modify procedures to ensure requirements are met; with Procurement to ensure incoming material meets specifications and suppliers meet quality standards; and within Quality to ensure overall compliance of products and processes.

Key Accountabilities

• Demonstrate knowledge of and adherence to site safety requirements.
• Execute goals and strategy for corporate and site level activities based upon company’s business objectives.
• Support supplier quality management activities, including audits and supplier performance evaluations.
• Investigate customer complaints and internal non-conformances, leading root cause analysis and implementing corrective and preventive actions.
• Participate in new product development projects, providing input on design for manufacturability and quality.
• Collaborate with various teams and leadership to develop and implement quality assurance strategies, policies, and procedures.
• Conduct regular inspections and tests on products, materials, equipment and processes to ensure compliance with quality standards and regulations.
• Analyze quality data and metrics to identify trends, root causes of issues, and opportunities for improvement.
• Develop and maintain quality documentation, including standard operating procedures, work instructions, and quality records.
• Lead or participate in cross-functional teams to address quality-related issues and drive continuous improvement initiatives.
• Maintain accurate records and reports related to quality control and compliance activities.
• Perform other duties necessary for the effective operation of the QMS.

Requirements

• Bachelor’s degree in engineering or related field
• 3 years of relevant working experience in a customer quality, process quality or engineering role, preferably in a manufacturing environment.
• Experience with root cause analysis, corrective actions, and quality improvement methodologies (e.g., Six Sigma, Lean).
• Ability to support Quality Management during audits and inspections.
• Excellent analytical and problem-solving skills, with the ability to interpret technical data and drawings.
• Knowledge of computer software like SAP, Microsoft Office applications (Word, Excel, PowerPoint).
• Ability to prioritize and work independently and proactively is critical for success.
• Previous experience in an ISO 9001, 13485 or GMP compliant manufacturing environment
• Previous experience with quality management system software for quality data tracking and document change management (e.g., TrackWise, MasterControl, Agile, QCBD, etc.) and internal auditor certification.

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are "Solar's Most Trusted"!

RESPONSIBILITIES

This is a quality engineering position. The incumbent shall execute the quality assurance role with good technical rationale and understanding, acquired from developing an appreciation of the industry practices, and applicable technology developments. Scope of work may include Quality management system improvement, quality assurance planning, supplier management, in-process quality control design and outgoing quality controls. Fresh graduates are encouraged to apply.

Essential Duties and Responsibilities:

Quality Management System according to ISO 9001

• Review and update Quality Management System procedures to meet the quality system requirements
• Maintain and update documents and records with proper documentation control & distribution
• Ensure system compliance & preparations for Management Review
• Manage internal and external corrective action reports (CAR)
• Maintain and improve the calibration management system
• Manage, conduct and improve internal audit programs and document review procedures
• Ensure readiness of all sections for both 3rd party certification body and customer audits
• Liaise with external auditors and certification bodies in conducting audits
• Conduct QMS and change management related training and coaching activities as part of organizational competency development

Product Development Framework

• Schedule decision gate review meetings on request according to regular review schedule slots
• Support technical project managers and department heads on preparation of project decision gate presentations in accordance to REC project execution guidelines, to ensure that projects are delivered timely and meet targeted technical and business objectives adequately
• Continuous improvement of the phase-gate review design and process

Product Certification and Reliability

• Manage the interface between international and national certification bodies and internal project teams in product certification compliance to international product standards (UL, IEC) and statutory requirements
• Maintain meeting minutes with certification bodies and file certification documentation in web-based database
• Monitor product reliability trends and analyze product testing results as part of reliability scope
• Initiate product reliability studies based on known data from internal and external testing

Supplier Management and Quality Assurance Planning

• Manage the qualification of new materials/suppliers.
• Manage the incoming quality of the materials
• Drive supplier quality through audits and efficient rating system and reviews to ensure conformance to specification and continuous improvement in system, procedures and processes.
• Develop and implement quality control plan for adequacy and suitability for the production
• Drive improvement of process and product quality by monitoring quality indicators (SPC, Yield, defect rates)
• Non-conforming materials and products management
• Benchmark, develop and implement inspection methods and procedures to meet quality objectives, product quality, quality assurance, technical goals and productivity savings.

Communication and Presentation

• Ability to communicate and present at all levels of the organization

Others

• Perform other duties as assigned
• Depending on the competencies developed, the engineer may be rotated to different departments

WORK LOCATION: REC Solar, 20 Tuas South Avenue 14 Singapore 637312
(Company Transport available to/from selected locations islandwide.)

Technical / Professional:

• Minimum bachelor's degree (engineering discipline preferred)
• Knowledge and working experiences in QMS and ISO 9001 audit, preferably in manufacturing industries
• Experience in using quality tools for problem solving
• Experience in GR&R, FMEA, SPC, MSA.
• Fresh graduate with strong technical and analytical interests will be considered

General:

• Strong sense of ownership and self-motivation, good initiative
• Must be able to work independently
• Proactive working attitude hands on approach
• Strong organization and project management skills
• High level of accuracy with special attention to detail.
• Ability to write procedures and work instructions.
• Excellent presentation, interpersonal and communication skills with demonstrated ability to communicate effectively with all levels of management, both internally and externally.
• Proficiency in Microsoft Office applications
• Good time management with ability to handle pressure and multitask under tight timelines
• Ability to work with limited supervision and through extended hours when needed
• Working experience in Solar/Semiconductor/Electronics manufacturing industry is advantageous.

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Job Description:

- Apply organizational quality systems in manufacturing processes.

- Interpret technical drawings and Technical Specification

- Perform inspection of Maintain Repair Overhaul (MRO) units and preparation of inspection reports

- Identify and evaluate quality problems, relating to the product, process and quality system, to initiate, recommend or provide solution

- Issue of Defect Rectification Notes

- Perform ad-hoc duties assigned from time to time

Job Requirements:

- Diploma/ Nitec in Mechanical/ Electrical/ Electronic Engineering

- Proficient in MS Office & SAP

- Possess Class 3 driving license.

- Knowledge of military vehicles or weapon will be advantages

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are "Solar's most trusted"!

RESPONSIBILITIES

This is a quality engineering position. The incumbent shall execute the quality assurance role with good technical rationale and understanding, acquired from developing an appreciation of the industry practices, and applicable technology developments.Scope of work includes quality assurance planning, supplier management, in-process quality control design and outgoing quality controls. Fresh graduates are also encouraged to apply, and for those who wish to make a career in Quality in a World Class High Tech Manufacturing Facility in Singapore.

Essential Duties and Responsibilities:

Quality Assurance Planning

• Develop and implement quality control plan for adequacy and suitability for the production and during new product introduction
• Drive improvement of material, process and product quality by monitoring quality indicators (SPC, defect rates)
• Non-conforming materials and products management
• Benchmark, develop/innovate and implement inspection methods and procedures to meet quality objectives, product quality, quality assurance, technical goals and productivity savings.
• Support customer audits and 3rd party inspection routines (by way of preparing quality data presentation, technical write ups)

Supplier Management

• Manage the qualification of new materials/suppliers & incoming quality of the materials
• Drive supplier quality through audits to ensure conformance to specification and continuous improvement in system, procedures and processes.
• Drives supplier performance through processes, efficient rating system and reviews.

Supervision of Quality Inspectors that support Production Operations

• Manage team of quality inspectors on daily routines and communications
• Plan shift activities with inspector team leads

Projects

• Develop understanding of product reliability and its corresponding components' contribution (based on product performance characterization and defect understanding)
• Support product qualification process (Provide quality requirements in FMEA, SPC, DOE, Control plan and other processes and procedures as required/suitable)

Quality Management System

• Participate in internal quality audits to drive conformance and continuous improvement in product quality
• Execute in accordance to QMS requirements (ensure timely updates to documents, WI, SOPs)

Communication and Presentation

• Ability to communicate and present at all levels of the organization.

Technical / Professional:

• Minimum bachelor's degree (engineering discipline). Preferably Mechanical or Electrical.
• Engineering knowledge in SPC controls or lean and six sigma methods and software tools.
• Engineering knowledge in using quality tools for problem solving
• Aptitude in higher level use of Excel (E.g.: Formulas and Macros) is an added advantage

Technological:

• Interest in following up and developing understanding of the technological developments in the industry on both products and components
• Expect to develop as an expert in Quality Management Systems and related standards and requirements (ISO 9001, IEC62941), if not already adept.
• Experience in reliability engineering would be advantageous.

General:

• Strong sense of ownership and self-motivation, good initiative, work independently.
• Proactive working attitude hands on approach
• Ability to handle experimental planning and perform product testing and report writing.
• Excellent presentation, interpersonal and communication skills with demonstrated ability to communicate effectively with all levels of management, both internally and externally
• Good time management with ability to handle pressure and multitask under tight timelines
• Willing to travel

People / Relations:

• Ability to interface and communicate effectively with cross-functional team and external

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection.
• Process field claims in a timely manner for resolution.
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation.
• Providing timely engineering insights including failure analysis technical reports and presentation.
• Analyze product warranty claim and provide modeling on product service life.
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization.
• Handles customer visits and factory audits and product inspection.
• Develop & contribute to building knowledge base of degradation from product to material level.
• Design tests to detect infant mortality and mid-life product failures.
• Perform investigation including product reliability data analysis, and modeling product performance behavior to identify opportunities in future development or continuous improvements for current technology.

• Bach / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)

REQUIRED SKILLS

• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Application experience in managing (large) data modelling would be favorable
• Excellent practical knowledge and use of Microsoft Office
• Excellent interpersonal skills, strong belief in driving for quality and customer satisfaction.
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors.
• Communicate effectively through presentation and technical reports.
• Enjoys rigors of technical reviews with peers & management to drive to business outcome.

• Managing PSSR along with safety, process and engineering team
• Development of commissioning and qualification protocols for process equipment, utilities, etc.
• Execution of commisioning and qualification tests and development of summary reports
• Completion of traceability matrix and system handover
• Verification of system mechanical completion(MC) and turnover packages (TOPs) from vendors and contractors
• Preparation and implementation of lock Out TAg Out (LOTO) plan for identified systems
• Execution of System Start Up (SSU) checklist
• Shake down testing of systems to derive system operating parameters
• Management of Project Change Controls, Data/ Drawing Amendment request, punch-lists and deviations.
• Development of Installation and Operational Verification protocols on Kneat
• Execution of Installation Verification (IV) on Kneat
• Verification of vendor commisioning reports for open punch-points/deviations.
• Verification of contractor MC packs for open punch-points.
• Operational testing of systems on Emerson Delta V process control system
• Review of functional specification and design specifications.
• Review of commissioning and qualification test protocols for the functional testing of process equipment
• Coordinating with Mechanical, Electrical and process Engineering Team for the execuion of commissioning and qualification protocols
• Execution of process automation software testing

Responsibilities

The main duties of the job will be to:

Responsibilities

· Perform assigned inspection and test activities

· Performs applicable visual, incoming, in-process and final inspection as per quality plan

· Perform Non-Desctructive Testing such as Penetrate Testing, Ultrasonic Testing

· Operate Coordinate Measuring Machine

· Verifying compliance with applicable test specifications, codes, standards and customer specification

· Prepare and submit required quality report(s), certification or documentation

· Ensure clear identification of product inspection status

Requirements

· Good diploma in Engineering or equivalent

· Possess minimally UT/MPI/DPI ASNT or PCN NDT Level II certification

· Minimum 2 years of QAQC work experience

· Proficient in reading drawings/blueprints

· Previous experience in and/or familiarity with the oil & gas industry preferred

About us (About SLB)

We are a global technology company, driving energy innovation for a balanced planet.

Together, we create amazing technology that unlocks access to energy for the benefit of all.

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse groups of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Electrical Engineers (Mechanical ) - (Design Prototypes Power Systems Control Panel)

Job Description:

• Analyze, design, develop, maintain products and assist in their commercialization.
• Basic knowledge on electrical motors (Induction and Permanent Magnet type)
• Understanding of basic electrical circuits, motor control and VSD operations
• Successful Position holders are excellent communicators, enjoy solving problems, and work well in teams.

Roles and Responsibilities:

• Design prototypes and systems for testing.
• Create test plans and reports
• Implement corrective actions on deviations
• Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts.
• Contribute to design standards and support design re-use.
• Create and maintain product documentation.
• Provide support to customers.
• Perform mechanical calculation and analysis
• Perform risk assessments
• Author technical reports, papers, articles, patents and presentations.
• Maintain familiarity with company technology, organization and business.
• Basic knowledge of materials (metals, elastomers) would be a plus
• Basic knowledge of simulations would be a plus

Qualifications and Experience:

• Bachelor in Electrical Engineering with 4 - 5 years of experiences
• Strong technical knowledge in electrical engineering
• Experience on 3 phase systems and electrical machines
• Knowledge of simulation tools, control panel design, electrical cable calculations

1. Contact customers by both phone and in writing to collect overdue payments

2. Investigate and resolve customer inquiries on billings in order to facilitate payments

3. Provide timely and accurate reporting of debtor aging reports and other reports as and when required by HQ

4. Update customer details, credit limits and terms into SAP system

5. Work with operation staff for new customer evaluation and update new customer details into SAP

6. Issue monthly statement of accounts to customers and letters of reminder for overdue accounts

7. Assist management to execute credit control procedures and credit risk management and address all internal control points

8. Any other duties and responsibilities assigned from time to time

Requirements:

1. Minimum Diploma in Accounting or its equivalent

2. At least 2 years of relevant experience

3. Knowledge in SAP is an added advantage

4. Able to multi-task

5. Good communication skills

Others Information:

1. 5-day work week

2. Daily meal subsidy, medical, dental & insurance benefits

3. Company Transport: 2 ways from Jurong East

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

- Perform inspection and verification of incoming materials, in-process production, and finished products as per customer requirements. Able to use pallet jack and handle semi-finished or finished goods with care.

- Maintenance and calibration of measuring equipment.

- Document inspection results by completing reports and logs.

- Raising NC reports and record findings, summarizing rework and waste.

- Inputting data into a quality database.

- Maintain a safe and healthy working environment by following standards and procedures; and complying with legal regulations.

- Perform any other related duties as assigned by the immediate superior.

Job Requirement

- Certificate/ITE/NITEC/ Higher NITEC in Precision Engineering/Mechanical or equivalent.

- Minimum 1 - 2 years relevant experience in Quality Control and new graduates may apply

- Ability to read and interpret drawings with a good understanding of geometric dimensions and tolerance

- Team player with a dependable attitude

- Salary neg. depend on your experience and qualifications.

Benefits

- Medical Claims $300 per year

- 7 Annual Leave

- Overtime

- Air Con, clean environment

Other Information

- 5 Working Days (Mon to Fri)

- Working hours: 8.30 am to 6.00 pm

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Legislative and regulations are integrated into operational activities.
• Annual HSE and Quality plan in place.
• Implementation and monitoring of HSE and Quality and plan.
• Verification of the overall wellbeing of the organisation health thru planned and ad hoc internal and external audits and inspections.
• Consolidation and upward reporting of HSE and Quality indicators.
• Take personal responsibility for HSE.

Requirements:-

• Min Bachelor Degree in relevant subjects with at least 6 years of relevant experience.
• Certified Safety Officer.
• Competency in OSH and Quality in terms of audit and implementation.
• Proficiency in written and verbal English
• Excellent interpersonal and communication skills.
• Proficient in Microsoft Office.

Mandatory Skills

Must-have Tech Skills / Framework:

1. Jira, Confluence, Cucumber, Selenium
2. Functional testing
3. Testing apps build on SPA frameworks (ReactJS/Angular)
4. BDD frameworks (Serenity)
5. Skillset in java, API test, Tosca is preferred.

Requirements:

• Bachelor degree or above in computing or engineering, a related field, or equivalent professional experience.
• An experienced test engineer with 2-5 years of experience in web applications
• Meticulous behavior
• Able to work independently.
• Dedicated, committed, and resulted oriented team player with strong initiative and ownership.
• Good inter-personal and analytical skills.
• Dedicated, committed and resulted oriented team player with strong initiative and ownership.
• Familiar with Agile software development lifecycle.
• Familiar with Web Application Automation Testing Development and Testing techniques such as smoke testing, database testing, integration testing, white and black box testing, regression testing, system integration testing and user acceptance testing.
• Good communication skills, both verbal and written.
• Knowledge of quality assurance principles, methods and processes
• Knowledge of test automation principles, methods and frameworks
• Knowledge in functional test, preferably with domain knowledge of banking or financial sector
• Comfortable working with tools such as Jira, Confluence, Cucumber, Selenium
• Experience with agile processes, testing within agile teams
• Experience with executing software testing within CI/CD processes
• Experience with testing apps build on SPA frameworks (ReactJS/Angular)
• Experience with BDD frameworks (Serenity)

Roles & Responsibilities:

• Determine the requirements and specifications of applications or systems to be tested.
• Develop a record on all functional test cases, results, and test data via Test Automation
• Performed estimation, planning, prioritizing, progress monitoring and coordination of testing activities
• Provided daily reports on UAT testing status
• Develop Test Automation Scripts, execute the existing Automation Scripts in the Regression Suite for eFX Trading platform products
• Have developed the major Functionality in TestNG framework includes Customised Report in XML
• Analyse client's business requirements and processes through document analysis, interviews, workshops, and workflow analysis
• Provide input into developing and modifying systems to meet client needs and develop business specifications to support these modifications
• Responsible for Quality of application in multiple environments (Test, UAT, Performance and Production)
• Involved in the test scenarios, test case, test execution (Unit, Integration, System, DB and Regression, defect review and test data Preparation
• Defect reporting

Must-have Tech Skills / Framework:

1. Jira, Confluence, Cucumber, Selenium
2. Functional testing
3. Testing apps build on SPA frameworks (ReactJS/Angular)
4. BDD frameworks (Serenity)
5. Skillset in java, API test, Tosca is preferred.

Requirements:

• Bachelor degree or above in computing or engineering, a related field, or equivalent professional experience.
• An experienced test engineer with 2-5 years of experience in web applications
• Meticulous behavior
• Able to work independently.
• Dedicated, committed, and resulted oriented team player with strong initiative and ownership.
• Good inter-personal and analytical skills.
• Dedicated, committed and resulted oriented team player with strong initiative and ownership.
• Familiar with Agile software development lifecycle.
• Familiar with Web Application Automation Testing Development and Testing techniques such as smoke testing, database testing, integration testing, white and black box testing, regression testing, system integration testing and user acceptance testing.
• Good communication skills, both verbal and written.
• Knowledge of quality assurance principles, methods and processes
• Knowledge of test automation principles, methods and frameworks
• Knowledge in functional test, preferably with domain knowledge of banking or financial sector
• Comfortable working with tools such as Jira, Confluence, Cucumber, Selenium
• Experience with agile processes, testing within agile teams
• Experience with executing software testing within CI/CD processes
• Experience with testing apps build on SPA frameworks (ReactJS/Angular)
• Experience with BDD frameworks (Serenity)

Roles & Responsibilities:

• Determine the requirements and specifications of applications or systems to be tested.
• Develop a record on all functional test cases, results, and test data via Test Automation
• Performed estimation, planning, prioritizing, progress monitoring and coordination of testing activities
• Provided daily reports on UAT testing status
• Develop Test Automation Scripts, execute the existing Automation Scripts in the Regression Suite for eFX Trading platform products
• Have developed the major Functionality in TestNG framework includes Customised Report in XML
• Analyse client's business requirements and processes through document analysis, interviews, workshops, and workflow analysis
• Provide input into developing and modifying systems to meet client needs and develop business specifications to support these modifications
• Responsible for Quality of application in multiple environments (Test, UAT, Performance and Production)
• Involved in the test scenarios, test case, test execution (Unit, Integration, System, DB and Regression, defect review and test data Preparation
• Defect reporting

Must-have Tech Skills / Framework:Jira, Confluence, Cucumber, Selenium
Functional testing
Testing apps build on SPA frameworks (ReactJS/Angular)
BDD frameworks (Serenity)
Skillset in java, API test, Tosca is preferred.
Requirements:Bachelor degree or above in computing or engineering, a related field, or equivalent professional experience.
An experienced test engineer with 2-5 years of experience in web applications
Meticulous behavior
Able to work independently.
Dedicated, committed, and resulted oriented team player with strong initiative and ownership.
Good inter-personal and analytical skills.
Dedicated, committed and resulted oriented team player with strong initiative and ownership.
Familiar with Agile software development lifecycle.
Familiar with Web Application Automation Testing Development and Testing techniques such as smoke testing, database testing, integration testing, white and black box testing, regression testing, system integration testing and user acceptance testing.
Good communication skills, both verbal and written.
Knowledge of quality assurance principles, methods and processes
Knowledge of test automation principles, methods and frameworks
Knowledge in functional test, preferably with domain knowledge of banking or financial sector
Comfortable working with tools such as Jira, Confluence, Cucumber, Selenium
Experience with agile processes, testing within agile teams
Experience with executing software testing within CI/CD processes
Experience with testing apps build on SPA frameworks (ReactJS/Angular)
Experience with BDD frameworks (Serenity)
Roles & Responsibilities:Determine the requirements and specifications of applications or systems to be tested.
Develop a record on all functional test cases, results, and test data via Test Automation
Performed estimation, planning, prioritizing, progress monitoring and coordination of testing activities
Provided daily reports on UAT testing status
Develop Test Automation Scripts, execute the existing Automation Scripts in the Regression Suite for eFX Trading platform products
Have developed the major Functionality in TestNG framework includes Customised Report in XML
Analyse client's business requirements and processes through document analysis, interviews, workshops, and workflow analysis
Provide input into developing and modifying systems to meet client needs and develop business specifications to support these modifications
Responsible for Quality of application in multiple environments (Test, UAT, Performance and Production)
Involved in the test scenarios, test case, test execution (Unit, Integration, System, DB and Regression, defect review and test data Preparation
Defect reporting

The company is a high-tech manufacturer of contact lens solutions, sterile pharmaceutical solutions, first-aid eye and wound irrigations as well as eye comfort drops.

Responsibilities:

• Inspects incoming raw materials for compliance with current standards.
• Conducts periodic test analysis on products undergoing stability studies.
• Inspects incoming packaging materials for compliance with current standards.
• Performs microbiological testing and environmental monitoring according to SOPs.
• Prepares test solutions, compounds, or reagents for laboratory use.
• Assists Chemist, Lab Supervisor, and Micro Supervisor in maintaining company quality manuals related to operating procedures.
• Assists in GMP audits, validation, qualification, and change control.
• Assist in maintaining QC-related files.

Requirements:

• Min Diploma in Chemistry, Chemical Process Technology, Pharm, Biotechnology, Quality Assurance or any other science-related
• Entry level are welcome, training provided
• Open to shift work

How to Apply:

Interested candidates, please submit your updated resume by using Apply Now button

**We regret to inform that only shortlisted candidates will be informed.**

Tan Zhi Ning

Registration Number: R23116771

EA License No: 18C9027