Total 59 chemical engineer job vacancies in Singapore

Job Description

• Design and calculation of building's structural engineering works
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of study reports, design reports, technical notes and public consultation papers.
• Preparation of tender documents and technical specifications.
• Evaluation of tenders and preparation of tender assessment reports.
• Provide support in project management and contract administration for building engineering contracts.

Requirements

• Bachelor Degree in Civil Engineering
• Minimum 3 years of hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Team player and able to work independent with minimal supervision

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Job Description

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works.
• Performance at this level requires developmental experience in a professional position.

Requirements

• Bachelor’s Degree in Civil Engineering
• Minimum 4-6 years experience in hands-on design for Structural projects
• Familiar with structure framing and element design including steel structure.
• Good project management and technical skills

Job Description:

• Lead the design, development, and implementation of mechanical systems and components for infrastructure and building projects
• Collaborate with multidisciplinary teams to ensure project success and timely delivery
• Conduct detailed analysis and calculations to optimize mechanical designs
• Develop and maintain technical documentation, including design specifications and reports
• Mentor junior engineers and provide technical guidance to the team
• Ensure compliance with industry standards, regulations, and quality control measures
• Participate in client meetings and present technical solutions
• Stay updated on the latest industry trends and technologies to drive innovation
• Contribute to continuous improvement initiatives within the engineering department
• Manage project budgets, timelines, and resources effectively

Job Requirements

• Bachelor's degree in Mechanical Engineering; advanced degree preferred
• Minimum of 8 years of experience in mechanical engineering, with a focus on design and development
• Proven track record of successfully leading complex mechanical engineering projects
• Strong proficiency in 3D modeling software (e.g., SolidWorks, Inventor) and AutoCAD
• Experience working with and coordinating multidiscipline design teams
• Excellent analytical and problem-solving skills
• Strong communication and leadership abilities
• Proficiency in project management and budget control
• Ability to work in a fast-paced, collaborative environment

Job Description

• Perform structural analysis, calculations, and create design sketches and drawings that convey the arrangement and design intent for underground structures works
• Conduct engineering assessments and evaluations, both for existing underground structures and potential structural alternatives, and prepare technical reports to document the findings.
• Engage in communication and collaboration with clients, sub-consultants, regulatory authorities, and other relevant parties to gather design information, present design alternatives, and expedite approvals.
• Cultivate and nurture client relationships to explore and expand business opportunities.
• Verify design calculations and review detailed drawings to ensure accuracy and compliance.
• Deliver projects of exceptional quality, meeting project timelines and budget constraints.

Qualifications

• Bachelor’s Degree in Civil & Structural Engineering.
• At least 8 years of relevant experience in structural design for infrastructure projects.
• Experience with underground structures and construction sequences is an added advantage.
• Registration with professional body will be beneficial.
• Knowledgeable in Autocad and/or BIM software will be an advantage.
• Strong project management skills.
• Candidate with extensive work experience and strong project management skills will be considered for other position
  

Job Description

• Participate in the design and development of electrical systems, from concept to implementation
• Collaborate with cross-functional teams to ensure project success and timely delivery
• Analyze and interpret complex electrical schematics and technical specifications
• Conduct feasibility studies and cost analyses for new electrical projects
• Develop and maintain electrical system documentation, including drawings and specifications
• Ensure compliance with national and international electrical standards and regulations
• Troubleshoot and resolve electrical engineering issues in existing systems
• Mentor junior engineers and provide technical guidance to team members
• Participate in client meetings and present technical solutions
• Stay updated on emerging technologies and industry trends in electrical engineering
• Contribute to continuous improvement initiatives within the engineering department

Requirements:

• Bachelor's or Master's degree in Electrical Engineering from an accredited institution
• Minimum of 5 years of experience in electrical engineering, with a focus on project development
• Proficiency in circuit design, analysis, power systems, and control systems
• Strong knowledge of national and international electrical standards and regulations
• Demonstrated experience in technical leadership and project management
• Advanced skills in AutoCAD, Revit, and other relevant design software
• Solid understanding of BIM and digital design tools
• Ability to write clear and concise technical specifications
• Excellent problem-solving and critical thinking skills
• Strong verbal and written communication abilities
• Experience in managing small to mid-sized teams
• Familiarity with electrical safety standards and best practices
• Proven track record of successful project delivery from concept through construction
• Ability to work collaboratively in a fast-paced, dynamic environment
• Strong organizational and interpersonal skills

Responsibilities:

• Lead the design and implementation of advanced electrical distribution systems, including low voltage and high voltage applications
• Develop and review technical documents such as design basis, load lists, cable schedules, and single-line diagrams
• Perform complex equipment sizing calculations for transformers, generators, cables, and other electrical components
• Utilize cutting-edge system studies software to model electrical systems and conduct load flow, short circuit, and protection relay setting studies
• Oversee project teams and mentor junior engineers, fostering a culture of innovation and continuous improvement
• Collaborate with cross-functional teams to ensure project goals are met on time and within budget
• Stay current with industry trends, standards, and regulations, implementing best practices in electrical engineering
• Provide technical expertise and support for troubleshooting complex electrical issues
• Contribute to the development of company standards and procedures for electrical engineering projects

Requirements:

• Bachelor's or Master's degree in Electrical Engineering from an accredited university
• Professional Engineering (P.E.) license or equivalent professional registration
• 8+ years of experience in electrical engineering, with a focus on power systems and distribution
• Proven expertise in designing low voltage and high voltage electrical systems
• Proficiency in using system studies software such as ETAP, SKM, or Amtech
• Strong knowledge of industry standards, including IEEE, NEC, and IEC
• Experience with CAD software for electrical design and drafting
• Excellent analytical and problem-solving skills, with a keen eye for detail
• Strong leadership abilities and project management experience
• Outstanding communication skills, both written and verbal
• Ability to work effectively in a team environment and mentor junior engineers
• Commitment to staying updated with the latest technological advancements in electrical engineering

Job Description

• Design and perform calculations for mechanical engineering works, including HVAC, fire protection systems, and plumbing and sanitary systems
• Conduct technical feasibility studies, life cycle analyses, and planning for building engineering projects
• Prepare comprehensive study reports, design reports, technical notes, and public consultation papers
• Develop detailed tender documents and technical specifications for projects
• Evaluate tenders and prepare thorough tender assessment reports
• Collaborate with cross-functional teams to ensure project success and timely delivery
• Provide support in project management and contract administration for building engineering contracts
• Stay up-to-date with industry trends, technologies, and best practices to drive innovation in mechanical engineering solutions
• Ensure compliance with local building codes and regulations in Singapore

Requirements

• Bachelor's Degree in Mechanical Engineering from an accredited institution
• Minimum of 5 years of hands-on design experience in building and/or infrastructure projects
• Proficiency in CAD software, such as AutoCAD and SolidWorks
• Strong knowledge of industry standards, regulations, and local building codes in Singapore
• Excellent project management and technical skills
• Proven ability to work independently with minimal supervision and as part of a collaborative team
• Outstanding problem-solving and analytical skills
• Strong attention to detail and organizational abilities
• Excellent written and verbal communication skills
• Ability to manage multiple projects efficiently and meet deadlines
• Familiarity with sustainable design principles and energy-efficient systems is a plus

What you’ll do:

• Familiar with the latest authorities’ design codes, specifications and requirements as well as submission procedures
• Responsible for project management, design coordination and contract management
• Undertake design and study of civil infrastructure work of road work, Sewerage, permanent and temporary traffic, drainage and utilities
• Able to be the design lead communicating and liaise with client and authorities while managing the team members design deliverable of drawings and reports.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals
• Able to supervise the team and carry out independent review of submission documents

This is for the Infrastructure team. 

Job Responsibilities

• Performing concept and detailed design of electrical systems including transmission and power projects
• Take responsibility for the assigned design components, including the necessary follow-up for approval from relevant authorities and clients.
• Assist in liaising and coordinating with Local Authority Departments to secure approval for design projects.
• Prepare design calculations, drawings, specifications, and tender documents for design projects under the guidance of senior engineers/managers.
• Work under guidance and supervision of a senior level team member.

• Undertake design for road and drainage, including long section and cross section of permanent and temporary stages
• Study and propose utility diversion for permanent and temporary stages
• Assist in developing the specifications and tender documents, cost estimates, calling tenders and tender evaluation.
• Undertake design development, prepare technical reports and supervision of roads and utilities works for infrastructure projects.
• Communicate with clients, sub consultants, approving agencies, etc, for purposes of obtaining information and approvals.

Job Description

• Undertake design for road and drainage, including long section and cross section of permanent and temporary stages
• Study and propose utility diversion for permanent and temporary stages
• Assist in developing the specifications and tender documents, cost estimates, calling tenders and tender evaluation.
• Undertake design development, prepare technical reports and supervision of roads and utilities works for infrastructure projects.
• Communicate with clients, sub consultants, approving agencies, etc, for purposes of obtaining information and approvals.

Requirements

• Recognized Degree in Civil Engineering, Transportation Engineering or Traffic Engineering
• Preferably at least 3 years of practical experience in road design, traffic management and road safety engineering. Experience in roadside drainage and traffic is an advantage
• Proficiency in Microstation and InRoad / InRail programme will be an advantage
• Good command of English
• Team player with good interpersonal and communication skills
• Analytical, resourceful, self-motivated, independent and diligent

What you'll do:

• Assist QP(S) in the daily supervision and coordination duties including civil (drainage, road) and structural works, site investigations, building works, etc,
• Lead, monitor and supervise RTOs on Site
• Responsible for the consistency of quality assurance inspections and testing for works
• Attend site meetings and resolve technical issues with Contractor
• Keep quality records of all works, monitor & report on work progress
• Review and comment on contractor’s submissions
• To review and supervise safety, environmental and health matters

Meet the Requirements:

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering or equivalent.
• Registered as RE with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• Minimum 5 years of experience in C&S works
• Familiar with drainage upgrading works, roadside drainage, etc
• Possess strong initiative, and ability to work independently and within team environment when required
• Good interpersonal, written and verbal communication skills

• Undertake design for road and drainage, including long section and cross section of permanent and temporary stages
• Study and propose utility diversion for permanent and temporary stages
• Assist in developing the specifications and tender documents, cost estimates, calling tenders and tender evaluation.
• Undertake design development, prepare technical reports and supervision of roads and utilities works for infrastructure projects.
• Communicate with clients, sub consultants, approving agencies, etc, for purposes of obtaining information and approvals.

Job Description

• Perform structural analysis, calculations, and create design sketches and drawings that convey the arrangement and design intent for underground structures works
• Conduct engineering assessments and evaluations, both for existing underground structures and potential structural alternatives, and prepare technical reports to document the findings.
• Engage in communication and collaboration with clients, sub-consultants, regulatory authorities, and other relevant parties to gather design information, present design alternatives, and expedite approvals.
• Cultivate and nurture client relationships to explore and expand business opportunities.
• Verify design calculations and review detailed drawings to ensure accuracy and compliance.
• Deliver projects of exceptional quality, meeting project timelines and budget constraints.

Qualifications

• Bachelor’s Degree in Civil & Structural Engineering.
• At least 10 years of relevant experience in structural design for infrastructure projects.
• Experience with underground structures and construction sequences is an added advantage.
• Registration with professional body will be beneficial.
• Knowledgeable in Autocad and/or BIM software will be an advantage.
• Strong project management skills.
• Candidate with extensive work experience and strong project management skills will be considered for other position
  

Job Description:

• Senior technical resource may serve as technical advisor for team
• Provides specialized technical input to studies and design for staff's specific area of expertise.
• Develops study and design procedures to facilitate high quality cost effective work by others.
• Participates in interdisciplinary review of project deliverables.
• Develops construction cost estimates and estimates of technical efforts for projects.
• Uses expertise in all steps of completing discipline component of PS&E package.
• Performs quality control review of design calculations or drawings.
• Prepares technical specification sections.
• Provides input to the development of engineering budget and schedule to meet requirements.

Requirements:

• Bachelor’s Degree in Civil & Structural Engineering.
• At least 10 years of relevant experience in structural design for buildings and infrastructure projects. Experience with underground structures and construction sequences is an added advantage.
• Registration with professional body will be beneficial.
• Conversant in technical analysis software for buildings and geotechnical works.
• Knowledgeable in Autocad and/or BIM software will be an advantage.
• Strong project management skills.
• Candidate with extensive work experience and strong project management skills will be considered for other position
  

Responsibilities:

• Responsible for the electrical design contents as assigned together with its follow-up for Authority and Client’s approval.
• Preparation of electrical design calculations, drawings, specifications, and tender documents for the design projects.
• Participation in design progress and design coordination meetings.
• Liaison and coordination with all applicable Local Authority Departments to obtain approval on projects.
• Responsible for the design review of the electrical services.
• Participation in design review meetings and workshops.
• Preparation of meeting records, design review and design progress reports.

Requirements:

• Degree in Electrical Engineering or other related field
• Minimum 8 years of professional hands-on electrical design experience in building and infrastructure projects
• Excellent technical skills and knowledge in field of expertise
• Experience with full project life-cycle engineering stages from feasibility study, through construction to commercial operation
• Strong project management, communication and interpersonal skills
• Proven track record of developing and delivering innovative client technical solutions

Job Description

• Design and drafting of mechanical engineering works e.g. ACMV, Fire protection systems, plumbing and sanitary
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of study reports, design reports, technical notes and public consultation papers.
• Preparation of tender documents and technical specifications.
• Evaluation of tenders and preparation of tender assessment reports.
• Provide support in project management and contract administration for building engineering contracts.

Requirements

• Bachelor Degree in Mechanical Engineering
• Minimum 4 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Team player and able to work independent with minimal supervision

Job Description

• Design of electrical systems for infrastructure and building projects
• Conducting technical feasibility study, life cycle study and planning for all electrical systems
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree in Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team

Experience / Skills:

• Degree in Mechnical Engineering (or equivalent qualification) or have a proven track record in the delivery of design projects.
• Minimum 8-10 years of working experience, preferably in consulting environment, with minimum 3 years of working experience in detailed design, design with contractor and onsite experience.
• Relevant experience in mechanical/electrical building services engineering design, including areas such as specification writing, calculations.
• Have knowledge and understanding of engineering practices, techniques and procedures and interfaces with design team and client needs.
• Make reference to regulations, industry standards and good practice in engineering design.
• A track record of having worked on a variety of Building Services designs covering for example, Infrastructure, Education, Healthcare and Commercial projects.
• Experience of seeing conceptual designs through to completion and dealing directly with clients.
• Able to contribute to the fee proposal and determine resources.
• Able to assess staff requirements at each work stage, agreeing these with the Project Manager and be able to manage single disciplinary and multi-disciplinary projects.
• Worked in infrastructure projects, e.g. railway projects will be an added advantage
• Experience in BIM (Revit) will be an added advantage.
• A member of a professional Institution or close to achieving professional engineer status.

Role Responsibilities:

• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.
• Conduct M&E services site survey
• Lead in the coordination with other disciplines in preparation of design deliveries
• Produce mechanical design from concept to detail design
• Assist Professional Engineer in liaison, preparation and follow up of Authority Submission.
• Work closely with Clients / Architects/ Structural Engineers / Quantity Surveyors, etc.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Prepare outline scheme report/technical content of the design information
• Input to pre-qualification and selection of contractors, respond to tender queries, comment and review tender returns.
• Conduct presentations / workshops on techanical matters.
• Attend tender/client interviews and site inspection meetings.
• Ensure the project work complies with the Project Management Plan and Programme.
• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.

• Senior technical resource may serve as technical advisor for team
• Provides specialized technical input to studies and design for staff's specific area of expertise.
• Develops study and design procedures to facilitate high quality cost effective work by others.
• Participates in interdisciplinary review of project deliverables.
• Develops construction cost estimates and estimates of technical efforts for projects.
• Uses expertise in all steps of completing discipline component of PS&E package.
• Performs quality control review of design calculations or drawings.
• Prepares technical specification sections.
• Provides input to the development of engineering budget and schedule to meet requirements.

Job Description

• Perform structural analysis, calculations, and create design sketches and drawings that convey the arrangement and design intent for underground structures.
• Conduct engineering assessments and evaluations, both for existing structures and potential structural alternatives, and prepare technical reports to document the findings.
• Preparation of design briefs, technical reports, technical notes and authorities submission documents.
• Carry out design activities to deliver cost-effective design deliverables in compliance with statutory and clients’ requirements.
• Co-ordinate with architect and other consultants to resolve interface issues and technical clarifications.
• Preparation of tender documents (conditions of contract, specifications and tender drawings)
• Involved in overall project lifecycle from study, planning, designing, tendering and in construction stages.
• Provides specialized technical solutions and expertise to clients
• Liaise with multiple stakeholders, clients, contractors and relevant parties
• Proactive communication, mentoring and guiding the Team to ensure their constant development

Qualifications

• Bachelor’s Degree in Civil & Structural Engineering.
• Minimum 8 years of relevant working experience in structural design of infrastructure projects e.g. rail/transit.
• Registration with PEB Singapore will be beneficial but not a must
• Conversant in technical analysis software for buildings and geotechnical works.
• Knowledgeable in Autocad and/or BIM software will be an advantage.
• Strong project management skills.
• Candidate with extensive work experience and strong project management skills will be considered for other position

• Design and calculations of mechanical engineering works e.g. ACMV, Fire protection systems, plumbing and sanitary

• Conducting technical feasibility study, life cycle study and planning for building engineering.

• Preparation of study reports, design reports, technical notes and public consultation papers.

• Preparation of tender documents and technical specifications.

• Evaluation of tenders and preparation of tender assessment reports.

• Provide support in project management and contract administration for building engineering contracts.

• Assist QP(S) in the daily supervision and coordination duties including civil and structural works, site investigations, building works, etc
• Lead, monitor and supervise RTOs on Site
• Responsible for the consistency of quality assurance inspections and testing for works
• Attend site meetings and resolve technical issues with Contractor
• Keep quality records of all works, monitor & report on work progress
• Review and comment on contractor’s submissions
• To review and supervise safety, environmental and health matters

Qualifications

• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering or equivalent.
• Registered as RE with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• Minimum 5 years of experience in C&S works
• Familiar with steel structure and piling inspection, piling load test and excavation works
• Possess strong initiative, and ability to work independently and within team environment when required
• Good interpersonal, written and verbal communication skills
• Contract duration: up to 12 months
  

• Analysis & design of civil & structural works.
• Preparation of design briefs, technical reports, technical notes and authorities submission documents.
• Carry out design activities to deliver cost-effective design deliverables in compliance with statutory and clients’ requirements.
• Co-ordinate with architect and other consultants to resolve interface issues and technical clarifications.
• Preparation of tender documents (conditions of contract, specifications and tender drawings)
• Act as a Lead Engineer for our Mid to Large size projects
• Involved in overall project lifecycle from study, planning, designing, tendering and in construction stages.
• Provides specialized technical solutions and expertise to clients
• Liaise with multiple stakeholders, clients, contractors and relevant parties
• Proactive communication, mentoring and guiding the Team to ensure their constant development