Total 120 Senior Executive art design entertainment job vacancies in woodlands tuas

Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Are you interested in joining a team that is revolutionizing the resource exploration and navigation industry? Atomionics is developing quantum sensors using cold atom interferometry, where atoms are cooled to nearly absolute zero using lasers. At such extreme temperatures, these atoms behave like waves, enabling precise measurement of forces acting on them.

This technology has vast potential applications, including advancing the zero-carbon energy transition, enhancing the performance of inertial navigation systems, and revolutionizing the global positioning system. At Atomionics, you will have the opportunity to design, prototype, test, refine and manufacture Quantum Gravity Sensors. You will develop solutions to improve the performance of our sensor, while also making it compact and robust for field deployment on projects around the world.

Atomionics is backed by some outstanding investors across private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other notable angels.

Responsibilities

• Design and fabrication of jigs, mounts, and fixtures for optics, electronics, and vacuum assembly.
• Create CAD models and engineering drawings, and select appropriate manufacturing processes forprecision manufacturing and fabrication of optomechanical components.
• Structural, vibrational, and heat transfer analysis (FEA) to ensure robustness in harsh environment
• Design temperature and vibration control systems for different subsystems.
• Liaise with our international supply chain partners located in China, France, Germany, India, Italy,USA, etc. and work within a multicultural team.

About you

• An absolutely driven individual with creative problem-solving skills, analytical mind, and persistence, ideally, demonstrated
• Highly skilled with CAD software: Autodesk Inventor / Solidworks etc
• Deeply knowledgeable in manufacturing techniques, surface finishing and assembly
• Skilled in GD&T for engineering drawings including tolerance stacks
• Skilled with hands-on fabrication including machining lathe, CNC, laser cutter, 3D printers

Even better if you have

• Experience in thermal design, including heat sinks, heat pipes, liquid heat exchangers, peltiers and FEA for thermal simulations
• Experience in designing simple PCBs & cable harnesses
• Been through a full product development cycle for a device with a complex system architecture
• Worked on personal hobby projects (and can brag about them!)

What we can offer you

• A chance to learn about the intricacies of deep-tech research, product development, and strategy in a high-growth startup while working with some of the best engineers and physicists
• Work on the cutting edge of quantum technology
• Develop robust applications for translational research
• Board games and curry night

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience
• Experience / knowledge in CMOS Image Sensor and Image Signal Processing (ISP)
• Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours

Job Description& Responsibilities:

· Responsible for advanced optical module/ethernet product hardware system and circuit design, provide design reviews, drive system/product design trade-offs, make data driven design choices to define product architecture

· Responsible for new product design verification and characterization, conduct high- speed link simulation, failure analysis and debugging in NPI stages to optimize design and ensure performance.

· Work with cross-functional teams to develop new products that are time to market and superior in performance, quality and cost.

· Contribute to optical transceiver module/ethernet product architecture and engineering specifications based on product and customer requirements.

· Perform system performance validation and DVT test plans, debug and analyze test results.

· Provide design documentation and technical reports.

Qualification:

· Bachelor/Master degree or above in electrical or electronics engineering or related fields.

· More than 7 years of working experience in optical module/networking switch or relevant products design and development.

· Sound knowledge of optical transceiver standards, architectures and applications, well understanding of design & trade-offs with respect to size, power consumption, thermal management and manufacturing complexity.

· Solid understanding of high speed signal integrity and power integrity analysis and optimization on PCB/system channel link analysis, well versed in modeling and simulation using tools such as HFSS, ADS, SIWAVE, LTSPICE etc.

· Familiar with high speed digital and analog ICs (CDRs, DSPs, SerDes, TIAs, DC-DC Converters, LDOs).

· Knowledge in IEEE 802.3 Ethernet and PCIe spec will be a plus.

· Extensive experience with lab equipment such as Sampling Scope, RealTime Scope, Protocol Analyzer, BERT, PNA/VNA.

· A solid team player with strong leadership and inter-personal skills, able to take proactive, collaborative and creative approaches to innovate and influence for optimal results.

· Strong written and verbal communication skills.

· Willing to travel as require.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Key Responsibilities:

1. Recruitment and Talent Acquisition:Manage the full recruitment cycle, including job postings, interviews, and onboarding.
   Collaborate with department heads to understand staffing needs and develop job descriptions.
   
2. Employee Relations:Act as the first point of contact for employee queries and grievances.
   Foster a positive workplace culture and handle conflict resolution professionally.
   
3. HR Policy and Compliance:Develop, implement, and update HR policies in line with local labor laws.
   Ensure compliance with legal requirements and industry standards.
   
4. Performance Management:Facilitate employee performance reviews and provide guidance for professional growth.
   Support managers in identifying training and development needs.
   
5. Compensation and Benefits Administration:Administer payroll, employee benefits, and incentives.
   Ensure competitive compensation structures to attract and retain top talent.
   
6. HR Data Management:Maintain accurate employee records and HR databases.
   Generate reports on HR metrics for management review.
   
7. Training and Development:Organize training programs to enhance employee skills and knowledge.
   Evaluate the effectiveness of training initiatives.
   

Requirements:

• Bachelor’s degree in Human Resource Management, Business Administration, or related field.
• Minimum 1 year of experience in an HR generalist or executive role.
• Strong knowledge of HR best practices and employment laws.
• Proficiency in HR software and tools (e.g., [specific software if applicable]).
• Excellent interpersonal, communication, and problem-solving skills.
• Ability to handle confidential information with integrity and professionalism.

Project-based Architectural Design Consultancy Services:

• Conceptualize concept and schematic designs.
• Carry out feasibility studies and presents design proposals.
• Design development that would include detailed drawings and specifications for contractors to follow for construction purposes.
• Assist in tendering and bidding processes and inspect the on-going construction to ensure that the project is built according to design plans.
• Liaise with and discuss project-relevant issues with clients.
• Negotiate with contractors on design requirements and building progress.
• Oversee progress of on-site work; ensure project is built according to design plans and resolve any issues that may arise.
• Work with engineers and surveyors to make sure that the building plans meet the necessary building standards.
• Project and/or design management of more than 3 - 4 projects at any given time.

Research-related Work:

• Assist in carrying out practice-based research into specific issues and challenges surrounding the built environment, with the aim of gaining greater insight into these issues and developing design strategies and solutions in response to them.
• Work with Director (Design and Research) to enhance public/industry awareness of the firm’s design philosophies, capabilities, and accomplishments (directly and indirectly) through design, writing, teaching, and research work.

Requirements:

• Minimum Bachelor Degree in Architecture or equivalent.
• At least 5 years of working experience in the related field.
• Able to work well with a team and take the lead at the working level.
• Able to guide younger staff in design matters.
• Possess good design and graphic communication skills, especially in the concept design, schematic design and design development stages.
• Positive attitude
• Some experience with tender documentation and construction stages.
• Software skills: Rhino, Grasshopper, Adobe Photoshop, Illustrator and Indesign. Revit and computational skills will be a plus.
• Willing to take on new challenges.

We are actively seeking two (02) experienced and dynamic individuals to join our sales team in the capacity of Senior Event Sales Executive (Event and Exhibition). Ideal candidates will come from related industries and possess a strong background in sales. The primary responsibilities of this role include managing both new and existing accounts, as well as generating leads through various channels such as marketing emails, telemarketing, networking, online presence, and social media platforms.

Job Description and Responsibilities:

• Flexible work schedule, with weekend work required only as needed.
• Cultivate and maintain strong relationships with both new and established clientele.
• Offer guidance and training to junior members of the sales team.
• Collaborate with the sales team to establish targeted sales objectives.
• Conduct site visits, sales presentations, and tender submissions.
• Prepare quotations and Delivery Orders.
• Research and expand the list of suppliers/vendors for project-related needs.
• Coordinate with in-house designers, printers, and production departments.

Requirements:

• Minimum of 2 years of sales experience in related fields (such as Large Format Printing, Events, and Exhibition carpentry).
• Demonstrated track record of successful sales in similar industries.
• Proficiency in analytical thinking, organization, and creativity.
• Exceptional communication, interpersonal, and customer service abilities.
• Familiarity with modern marketing techniques.
• Strong networking and communication skills.
• Understanding of commercial trends and marketing strategies.
• Effective project management skills, including collaboration with designers, production teams, external contractors, and suppliers to ensure project completion.

Benefits:

• Basic Salary: $3,000 to $3,500
• Commission: Based on 3% of nett sales onwards
• Overriding commission scheme on team’s effort.
• 5 days work week and weekend’s attendance only when required.
• Annual leave begins at 12 days on first year
• Transportation claim on work related $250 (Without own transport) or
• Transportation claim on work related $500 (With own transport)
• Comprehensive benefits package including medical, dental, transportation, and mobile phone bill reimbursement.
• Supportive and friendly work environment.
• Clear career progression opportunities, with the potential for advancement to a managerial role within the first year.

We are searching for reliable Event Ops Executives to join our capable team of professionals. The Event Ops Executives will be tasked with project coordination and administrative support. He/she will be reviewing specifications and preparing estimates, negotiating with the production team, sub-contractors, and vendors, as well as building relationships with clients.

What it will take to be a successful Event Ops Executives would be one that possesses a good personality and communication skills.

Roles and responsibilities:

• Assist project based on assigned sales representative.
• Office-based and will go on several site visits.
• Conduct site meeting, measurement, and photo-taking.
• Work on costing, budgeting, procurement, and project planning.
• Liaising with production head for internal costing and project management.
• Assist in managing and preparing quotation, based on compiled information for the events/renovation projects. This ranges from initial basic calculations, quotations, and Variation Order (VO).
• Allocate work to contractors and subcontractors to facilitate the smooth workflow process.
• Oversee installation on-site and resolve and project issues during the course of the project.
• Control project scope to meet project objectives to enhance project deliverables and key work activities.
• Review, prepare and submit tender project.
• Liaising with client on project’s requirement and showing samples.
• Review of operational, administrative system and improvement plan.
• Create and manages system and processes within the daily operations.
• Working collaboratively with both internal and external members. Such as the sales, designer, production, operations, subcontractor, and vendor.
• On-Job Training (OJT) provided.

Requirement:

• As On the job is training, no relevant work experience is required
• Good communication skill is needed for discussion with both internal and external members, such as the sales, designer, production, operations, subcontractor, and suppliers
• Familiar with the use of MS applications, such as Word, Excel, Powerpoint and Outlook
• Good with numbers which will be meant for computing costing and on-site measurement
• Knowledge of filing systems and processes

Benefits:

• 5 days work week and weekend’s attendance only when required
• 2% commission based on the net profit value
• Staff pantry
• Friendly and conducive environment
• Flexible working arrangement
• Clear career advancement
• Medical & Dental / Optical Claim

Location: Jurong East, West Region, Singapore

Company Overview: Francyn Atelier is a dynamic start-up company revolutionising the Design & Architecture industry in Singapore. Committed to creativity, excellence, and client satisfaction. This is an exciting opportunity to join a fast-paced start-up environment and play a key role in shaping the future of Design & Architecture industry in Singapore.

Key Responsibilities:

• Client Communication: Handle correspondence with clients, schedule meetings, and maintain accurate client records.
• Document Management: Maintain and update project files, contracts, and invoices.
• Scheduling: Organise project timelines, meetings, and appointments for sales team and designers.
• Data Entry: Accurately enter and maintain project-related data in internal databases.
• Support to Team: Provide all administrative support to the team such as preparing documents, and managing submissions.
• Accounts Support: Assist to liaise with finance department with invoice and receipt processing, tracking payments, and preparing expense reports.
• Vendor Coordination: Liaise with suppliers and contractors to obtain quotes, coordinate deliveries, and ensure materials are available for projects.
• Office Management: Ensure the office runs efficiently by managing supplies, organising meetings, and coordinating maintenance services.
• Other Duties: Perform additional administrative tasks as required.

Requirements:

• Diploma or degree in Business Administration or related field.
• Minimum of 3 years of experience in an administrative.
• Strong proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).
• Excellent communication skills, both written and verbal.
• Ability to multitask and prioritise tasks efficiently.
• Detail-oriented and capable of working independently.
• High level of discretion and confidentiality.
• Strong attention to detail and problem-solving skills.
• High level of professionalism and discretion.
• Ability to adapt to changing priorities and work efficiently under pressure.
• A good team player.
• Working rights required for this role.
• Preferably able to start work immediately.

What We Offer:

• Competitive salary with performance-based incentives.
• Collaborative and inclusive work environment.
• Opportunities for professional development and career advancement within a dynamic SME environment.
• Opportunity to make a significant impact and drive growth within a growing interior design SME.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

Position Overview:

As design verification engineer, you would be part of a passionate verification team that is constantly pushing the limits – developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C/C++ co-simulation, system emulation to mixed-mode simulation & formal verification. The goal is simple – to achieve zero-defect with the best and smartest approach to the large verification space.

Requirements:

1. Experience in UVM verification methodology

2. Disciplined, quality-minded, and highly driven for excellence,

3. Excellent team player and good communication skills

4. MSEE/BSEE in Electrical Engineering or Computer Engineering, with 3 years of relevant experience, but are open to fresh graduates with outstanding results

5. Candidates with relevant experiences would be offered as Senior or Staff, taking on higher responsibilities

6. Experience in video processing and video analytics is a plus

7. Passionate and strong in general programming is a plus

• Identifying potential clients and markets, researching industry trends, and understanding customer needs.
• Actively seeking out new sales opportunities through cold calling, networking, and social media.
• Building and maintaining relationships with clients, understanding their needs, and ensuring customer satisfaction.
• Creating design concepts that reflect the client’s vision, including layouts, color schemes, lighting, furniture, and materials. This involves brainstorming and presenting mood boards or design sketches.
• Working closely with contractors, architects, suppliers, and craftsmen to ensure the design is executed correctly and materials are sourced on time.
• Overseeing the design project from concept to completion, managing timelines, budgets, and quality control. This includes regular site visits to ensure the work is progressing according to plan.

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Responsibilities

• Collaborate with architects on SoC (System on Chip) architecture discussions and optimizations, focusing on integration and system block development, including areas such as power management, clock/reset, system registers, test control, and PinMux.
• Work with architects and APR (Automated Place and Route) teams on SoC floorplanning, power checks, and timing constraint reviews.
• Provide support for SoC DFT (Design for Testability) and participate in SoC verification planning and verification support.

Job Requirements:

• Bachelor’s or Master’s degree in Electronic Engineering with experience in ASIC design.
• Proficiency in ASIC design flow, including RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure, and verification.
• Solid understanding of DFT principles and practices.
• Experience in a UNIX/Linux environment with scripting skills.

Interested candidates kindly click the APPLY NOW button.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

Xie Jiani (R1548854)

EnviroDynamics Solutions Pte Ltd

EA License No.: 12C6285

Fresher is a leading lifestyle food group that specializes in bringing boutique style services to the masses.

Established in 2019, the Fresher group has amassed strong traction within each of its brand's market and high client stickiness across our 3 brands: Fresher Performance Meals, Fresher Dinners, Fresher Catering & Events.

We are expanding our team and are looking for ambitious, bold individuals with an eye for detail to join us. As our resident Social Media and Design Executive, you’ll be partaking in the launch of our 3rd brand and seeing it from concept to launch. In addition, you’ll be thoroughly involved in this year’s Christmas catering - a highly anticipated, but thrilling and rewarding season.

- Option to extend beyond 3-month contract

Job Description

• Generate content across socials in line with brand goals
• Manage the company’s socials (tiktok and instagram)
• Conduct and edit videos and photography based on the content calendar
• Design and edit marketing materials (social media posts, images, mailers etc.)
• Update the website with edited images and menu accordingly

Requirements

• A good eye for design
• Video editing software (Capcut / DaVinci etc.)
• Photo editing software (Adobe Creative Suite, Photoshop / Illustrator / Canva)
• Knowledge of food is good to have
• An attitude of learning new things, and ability to multitask and time manage
• A creative eye for the social world
• Openness to work during weekends for shoot, during the high key season prior to launch day

Benefits:

• Food provided

Schedule:

• Monday to Friday

Work Location: In person

Job responsibilities:

• Strategise with business line leaders for key client opportunities and revenue opportunities for the Singapore business
• Drive strategic and business development meetings
• To hit sales target and secure new projects
• To work closely with Interior Designers and Architects.
• Work closely with dealers to close the orders.
• Develop new business, new market development of an assigned business division in Singapore
• Attend preliminary sales and site meetings-to obtain drawings and design brief from the client

Requirements:

• Min 3 years of sales experience in interior fit-out/retail fit-out.
• Have good contacts with Interior Designers, Architects, and Main Contractors, Direct client & etc.
• Prefer relevant experience in commercial Projects
• Strong Personality Trait, fast proactive, ambitious, strong initiatives.

Manage assigned projects to ensure quality and on-time execution to the project’s specifications and client’s expectations.

• Coordinate the production workflow between the Sales, Design, Production departments including any external sub-contractors and suppliers.

• Manage sub-contractors and suppliers to ensure quality and on-time delivery within project costs.

• Utilise company’s project management software to coordinate and communicate with project team members during the production process.

• Initiate Production Schedule and manage deadlines for the delivery of projects on time.

• Conduct project meetings as and when required, eg. for issues resolution and updates.

• Facilitate change requests to ensure that all parties are informed and manage any impact on schedule and budget.

• Managing client’s expectations during the project transition period.

• Prepare an Onsite Schedule for the coordination of load-in, setup and dismantling works and share it with relevant parties.

• Oversee onsite setup work to check on quality delivery, safe work procedures and on-time completion, when required

• Apply Permit To Work with supporting WSH documentation (Risk Assessment, Methods Statement, Safe Work Procedures) and any project-related admin work when required.

• Source for sub-contractors, suppliers and production material, when required