Total 795 environmental officer job vacancies in D19 Serangoon Garden, Hougang, Sengkang, Punggol

Qualifications & Experience:

• Registered as WSHO with MOM
• More than 3 years of experience in LTA sites

Job Description & Requirements

• Ensure that all construction activities comply with Singapore's safety regulations and standards, such as the Workplace Safety and Health Act (WSHA) and associated regulations.
• Conduct regular risk assessments to identify potential hazards on construction sites and develop plans to mitigate these risks.
• Organize and facilitate safety training programs for construction workers to educate them on safe work practices and procedures.
• Conduct routine inspections of construction sites to identify safety violations and address them promptly.
• Ensure that safety equipment and protective gear are in good condition and readily available.
• Investigate accidents, incidents, or near misses, and report them to the relevant authorities and management.
• Recommend corrective actions to prevent similar incidents in the future.
• Develop and implement emergency response plans for construction sites, including fire safety, first aid, and evacuation procedures.
• Maintain accurate safety records and documentation, including incident reports, safety training records, and safety audits.
• Promote a culture of safety among all construction workers and contractors.
• Conduct regular safety meetings with workers and management to discuss safety issues, share best practices, and address any concerns.
• Ensure that all workers are provided with and properly use personal protective equipment (PPE) as required by regulations and site-specific hazards.
• Maintain open and clear communication with construction management, contractors, and regulatory agencies regarding safety issues and compliance.
• Perform safety audits and assessments to evaluate the effectiveness of safety programs and procedures and recommend improvements.
• Maintain accurate records of safety-related documents and reports, including training records and incident reports.

Location:

• Jurong depot

Role Overview

• To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

COMPANY DESCRIPTION

MINDS has been caring for Persons with Intellectual Disabilities (PWIDs) and their families since 1962.

Grounded in the belief that all PWIDs have innate abilities and talents, MINDS is committed to empowering them and enhancing their quality of life, while advocating for greater inclusivity for PWIDs as a nation.

MINDS is today one of the largest charities in Singapore employing more than 850 staff. With the key focus to expand community-based services, improving the employability of PWIDS, strengthening education, and engendering inclusive community living, MINDS offers a holistic range of services and programmes across the PWIDs’ lifespan.

These include schools, employment and training development centres, home-based care services and community-based services to cater to the physical, psychological, environmental and social needs of PWIDs. For more information, please visit www.minds.org.sg.

RESPONSIBILITIES

To perform the tasks of teaching, training, supervising, maintaining and developing the functioning level of client to function adequately and independently in the areas of Activities of Daily Living, Community Living, Social and Recreational Skills.

Please watch this recruitment video to find out more about the role of Training Officer - https://bit.ly/3fHXuvv

Client Engagement & Development

• To meaningfully engage, teach, train, supervise, maintain and develop the functioning level of clients to function adequately and independently in the following areas:

• Activities of Daily Living
• Home Living Skills
• Community Living & Mobility Skills
• Social and Recreational Skills
• Work Readiness Skills

Client/Trainee Management & Development

• Formulate and implement Individual Learning Programme (ILP) through professional assessment
• Engage in continuous assessment, training and evaluation of trainees’ holistic development
• Plan and Implement appropriate group activities
• Plan, implement and monitor trainees’ security and safety procedures

 Support Allied Health Professionals

• Monitor and implement programmes designed by Allied Health Professionals in the area of health fitness & wellness programme, motivational & behaviour management plans as well as sensory awareness
• Communicate critical information to Social Worker and Centre Manager

 Administrative & Operations

• Support unit operational and logistics management
• Ensure centre/trainees safety and security
• Update of  clients’/trainee’s daily attendance and participation in activities, events and programmes in various client management system platforms
• Engage in caregiver dialogue sessions, home visits and maintain good rapport and communication with parents / caregivers
• Attend staff meeting and training as required

 Event Management

Staff will be assigned to oversee at least one of the following duties and will provide assistance to the other staff when required:

Camp, Festive Celebrations, Sports Events, First Aid & Medicare, Evacuation & Emergency Planning Team, Transport Duties, Staff Welfare and others

• Organise internal/external events and activities for trainees
• Support volunteer engagement events
• Support public education activities
• Support MINDS events at organisation level

• Minimum O levels
• NITEC Certificate in Community Care & Social Services (ITE)
• Certificate of Special Needs Education (MOE)
• Diploma of Special Education (MOE)
• Diploma in Disability Studies (SSI)
• Diploma of Community Services (SSI)

• Computer literacy skills MS Word, Excel and PowerPoint
• People-oriented team player
• Good interpersonal and communication skill
• Passion and great deal of patience to work with people with intellectual disabilities

Contract Period:

• 16 January 2025 TO 15 January 2026

Deployment:

• Mondays to Thursdays: 9:00am to 6:00pm, inclusive of 30 minutes lunch break
• Fridays: 9:00am to 5:30pm, inclusive of 30 minutes lunch break
• Service not required on Saturdays, Sundays except by special arrangement with off-in-lieu provision
• Service not required on gazetted public holidays

Scope of Works:

Technical Support Officer Art:

1. To assist the art dept with acquisition of materials (receiving, DO processing of purchases, sorting and keeping purchases) as well as do paperwork for condemnation of obsolete or damaged items, carry out disposal
2. To manage maintenance and upkeep of Art rooms and resources in the Art Block (6 Art rooms and Kiln room, Woodwork room, darkroom and other related areas, including art materials and assets. E.g, Drill press, Bend Saw, 3D printers)
3. To supervise students at work when no teaching staff is around, invigilate tests and internal exams when called upon for assistance.
4. To provide support in managing the attendance of Sec 1-4 AEP Centre students and communicate with sending schools and parents on results and other admin matters
5. To oversee security of the art rooms by monitoring CCTV data, locking up rooms at 6pm.
6. To provide support and logistical assistance for department and students’ participation (Eg SYF Art Festival) and organisation of art exhibitions (Eg in 2025, Art Festival)
7. To assist in photo-documentation of students at work for purposes of T&L review
8. To oversee any repairs or renovation works being carried out (Eg Renovation of art gallery)

Music:

1. To assist the music dept with acquisition of materials and resources/instruments, repair of instruments as well as all related admin related to procurement of goods or services (receiving, DO processing of purchases, sorting and keeping purchases)
2. To assist in the maintenance and upkeep of the 5 music-learning rooms, including management of the library, cataloguing and stock taking
3. To supervise students at work on occasions when teaching staff is not around.
4. To oversee security of the art rooms by monitoring CCTV data, locking up rooms by 6pm during term time.
5. To assist in setting up for lessons in terms of instruments / computer / electronic set up
6. To assist in setting up of video cameras for practical examinations

Requirement:

• Good communication and interpersonal skills
• Good team player with a high level of initiative and independence.
• Proficient in MS Office and Excel
• Candidate with prior working experience in schools (at least in the last 2 consecutive years), directly with students.

Roles & Responsibilities

Scope :

All finance and accounting matters relating to our business.

Accountabilities/Responsibilities :

-Maintaining accurate and up-to-date records of financial transactions, including accounts payable and receivable, general ledger entries, and bank reconciliations.

-To prepare invoices for reporting.

-Preparing all Final Disbursement Accounts (FDA) accurately and within deadlines.

-Prepare and arrange 'Cash To Master (CTM)' with vendors.

-Process payment to suppliers and staff reimbursement.

-Prepare monthly AP journals, postings and schedules.

-Any other adhoc tasks as assigned by your immediate supervisor

Skills and Qualifications :

Proficient in Microsoft Excel and D365

Numerical Skills and attention to details

Diploma in Accountancy or its equivalent

Job Description:

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team & Resident Engineer on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To attend site, progress, variation and coordination meetings
• To coordinate with Resident Engineer with respect to C&S engineering works, architectural and M&E engineering works
• Period: 36 months
• Start from: December 2024

Requirement:

• Min Diploma in Civil Engineering, Construction Engineering, Architectural or equivalent
• At least 4 years of relevant experience in supervision of commercial buildings
• Resident Technical Officer Certificate accredited by IES / ACES
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Location: Changi

Responsibilities

1. Monitor, supervise, and inspect works

2. Ensure quality control and compliance

3. Review drawings, specifications, and materials

4. Manage defects, progress, and records

5. Ensure safety, cleanliness, and tidiness on site

6. Implement mitigation controls from risk registers

Work Arrangement:

- Night shifts

- Sundays

- Public Holidays

- Assigned shift duty roster

Key Skills:

1. Technical knowledge (construction,mechanical/electrical)

2. Leadership and supervision

3. Quality control and assurance

4. Safety management

5. Communication and interpersonal skills

Qualifications & Experience

1. 5+ years of experience in RTO role

2. 3+ years in supervision of complex construction works

3. Diploma in Mechanical/Electrical discipline

4. Accredited by JAC (IES/ACES)

5. WSHMCI certification (or SCW/BCSS)

· Cashiering duties;

· Guide residents to make S&CC payment on e-platforms;

· Attend to residents on feedback matters as part of the front line customer service team;

· Assist in cases creation in the system;

· Follow up with residents on the progress of the cases that have been attended by the estate team or other department (case by case) prior closing it in the system;

· Liaise with other team members from other departments pertaining to the feedback or queries cases;

· Assist with Facilities Booking matters;

· House visits;

· Any other duties assigned by the Supervisor.

Role Overview

Supervision and co-ordination of excavation and trenching of the installation of fire hydrant chambers and pipes (both mechanical joint and push-on joint methods) are done using approved earthquake resistance Kubota Pipes

Ensure that all installations are in accordance with the Kubota GENEX pipe installation methods, approved drawings, and applicable local Codes, Regulations and Standards

Role Responsibilities

Inspect and monitor quality of workmanship of the works on site

Check all drawings and contract specifications (including authority aubmission drawings and shop drawings) Job Requirements

Knowledge of Microsoft office words, excels and PowerPoints

Able to commit night shift & overtime

· Review Method Statement & Risk Assessment Document & Inspection Test Plan procedure

· Review the Quality Assurance (QA) & Quality Control (QC) Plan and Procedure Documents

· Follow the approved engineering drawings /documents & carried out inspection.

· Review & follow QP/PE Design approved documents

· Read & follow project requirements

· Daily site survey & monitor site activity

· Review Site Construction Query (SCQ) & approval

· Review project overall schedule on weekly basis on construction and inspection activities

· Checking procurement report & closely follow up

· Internal meeting with Eng., Team & contractor

· Follow-up & monitor daily project schedule

· Carried out Inspection as per AFI

· Attend FAT at vendor facility

· Prepare weekly report

· Checking daily & weekly report by contractor

· Attend Meetings with Stake holders

· Participate safety site walkdown

· Review third party inspection FAT documents

· Closely follow-up with punch list & carried out inspection

· Review Construction MOM & Monthly report

Job Requirements

Possess at least Degree in (Mechanical) Engineering

Must be experienced in supervision of Changi Airport Runway Projects

Minimum 5 Years of experience as RTO on local projects

Registered resident technical officer with IES/ACES

Ensure Airport Operational and Safety Requirements

Ensure all Regulations and Standards of the Runways, Taxi ways, Military Taxi way and Airport Emergency Service

Qualification:

· At least Nitec in Technology for Facility Management, GEC “O” or “N” level, “A” Level or equivalent

· At least 2 years’ relevant working experience

Job Description:

· To man the FRC. The FRC is first point of contact whenever a user seeks for urgent assistance.

· To receive fault reports through the hotline and email, and redirect the fault reports to the relevant maintenance contractor

· To accurately and timely log-in/update fault reports into the MMS (Maintenance Mate System)

· To ensure the completion of the repair or servicing of any outstanding faults and service requests within the KPI

· To receive, process, and follow up events and logistics requests

· To perform other ad-hoc duties required

• Promoting and sales of relevant products and services
• Delivery of excellent customer service and enquiry handling
• Leads hunting and re-engaging of existings clients
• Arranging and attending to appointments of related sales activities
• Keep records of customer interaction and relevant transactions data
• Handle documentation and other administrative duties

Qualifications

• Minimum GCE “O” Level, Higher NITEC or equivalent

Requirements

• Proactive and able to work independently.
• Detail-oriented, result-driven and self-motivating
• Good verbal and interpersonal communication skills
• Basic knowledge in automotive industry and relevant car trading experience is an advantage

• Basic + Commission

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Summary:

• Logistic industry (Air & Sea)
• Basic salary up to $2800
• Variable bonus
• Location: Changi
• 5 days work week

Key Responsibilities:

• Handle all bookings for both air and sea freight
• Handle customer inquiries regarding order status, delivery schedules, shipping rate and etc
• Interact with customer via phone / email
• Process customer orders, documentation, and schedule for deliveries
• Apply for custom permit if required
• Resolve any issues related to damaged goods, delayed shipments and etc
• Other related ad-hoc duties

Key Requirements:

• Min 1 year of relevant experience in logistic industry
• Bilingual in Mandarin to deal with Mandarin speaking clients and vendors

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Qualification:

• Registered RTO in Accredited with the Joint Accreditation Committee of the Institute of Engineers Singapore (IES) and the Association of Consulting Engineers (ACES).

Experience:

• Minimum 1 years’ experience in the supervision of building projects in Singapore.
• Conversant in M&E design, specifications, site installation, services coordination, code of practice, Authority inspection and handover.
• Conversant in contract administration with Public Service Sector Conditions of Contract, conversant with statutory requirements, site management, quality control procedures, system testing & commissioning and submission of progress report.

Duties:

• Full-time on site.
• Carry out the supervision of building works as stipulated in the Building Control Act and work under the control and direction of the appropriate Qualified Person when carrying out the supervision.
• Expect to work overtime on some weeknights and Saturdays where required. Overtime is claimable via timeoff for the next day, subject to approval.
• Carry out the supervision on site for diversion services when required.

Site Location:

• East area.

Salary Range:

• $4,500 to $6,500.

Responsibilities:

• To process refunds within 3 working days from receipt date
• To process refunds within 3 working days upon requested date
• To process refunds within 2 working days from requested date
• Replies to email queries within 48 hours
• Handles enquires from patients about refund process/status

Requirements:

• Diploma Level (Healthcare related, Accounting, Business, Marketing, Mass Comm, Hospitality)
• Competent and fluent in spoken and written English
• Computer Literacy - Microsoft office Knowledge / SAP (Advantage)
• Preferably 2 years of working experience in administrative support and customer service Experience in healthcare would be advantageous

Location: Changi

Responsibilities

1. Monitor, supervise, and inspect works

2. Ensure quality control and compliance

3. Review drawings, specifications, and materials

4. Manage defects, progress, and records

5. Ensure safety, cleanliness, and tidiness on site

6. Implement mitigation controls from risk registers

7. Adhere to shift duty roster

Key Skills:

1. Technical knowledge (civil/construction)

2. Leadership and supervision

3. Quality control and assurance

4. Safety management

5. Communication and interpersonal skills

Qualifications & Experience

1. 5+ years of experience in RTO role

2. 3+ years in supervision of complex construction works (tunnels, excavation, foundation)

3. Diploma in Civil/Structural/Geotechnical discipline

4. Accredited by JAC (IES/ACES)

5. WSHMCI certification (or SCW/BCSS)

Key Responsibilities:

1. Supervise complex construction works

2. Ensure quality control and compliance

3. Maintain site records and progress reports

4. Resolve site issues with good team spirit

5. Work shifts as required

Location: Changi

Responsibilities

1. Monitor, supervise, and inspect works

2. Ensure quality control and compliance

3. Review drawings, specifications, and materials

4. Manage defects, progress, and records

5. Ensure safety, cleanliness, and tidiness on site

6. Implement mitigation controls from risk registers

Work Arrangement:

- Night shifts

- Sundays

- Public Holidays

- Assigned shift duty roster

Key Skills:

1. Technical knowledge (construction,mechanical/electrical)

2. Leadership and supervision

3. Quality control and assurance

4. Safety management

5. Communication and interpersonal skills

Qualifications & Experience

1. 5+ years of experience in RTO role

2. 3+ years in supervision of complex construction works

3. Diploma in Mechanical/Electrical discipline

4. Accredited by JAC (IES/ACES)

5. WSHMCI certification (or SCW/BCSS)

Job Description:

Provide recruitment support for all levels of staff including:

• Job advertisement posting;
• Screening resumes to determine which candidates meet the minimum requirements;
• Conducting interviews to narrow the number of potential candidates who will be interviewed by the hiring Director;
• Conducting reference checks by verifying employment information and contacting the professional and personal contacts provided by the candidate;
• Schedule interviews for hiring Director via online or face to face.

Requirements:

• Preferably Entry Level specialized in Human Resources or equivalent;
• Excellent communication skills;
• Training will be provided for candidates with minimum experience.

First round of interview will be held via zoom.

A*STAR Infectious Diseases Labs (A*STAR ID Labs) is seeking for a Research Officer to join us in our mission to be a leading centre of infectious diseases research. A*STAR ID Labs aims to develop a cohesive A*STAR response to drive and deliver translational infectious diseases research to better health and economic outcomes.

The candidate will be joining the Antimicrobial Chemical Biology Lab, a newly established group in A*STAR ID Labs focusing on the development of synthetic antimicrobial compounds for potential therapeutic applications. Scholarship opportunities will be available for those interested in pursuing further education at the master’s or PhD level.

Research projects will encompass various tasks such as:

• Chemical synthesis
• In vitro activity testing
• Understanding mechanisms of action
• In vivo efficacy evaluation.
• Support the team in lab operation
• Upkeep of consumables
• Safety oversight
• Labware procurement
• Documenting experimental procedures and results.

Job Requirements:

• Bachelor’s degree in microbiology, biomedical science, chemistry, chemical engineering, bioengineering, or related field
• Familiarity with basic microbiology (e.g., bacteria/fungi culture, agar plating, PCR) and chemistry (e.g., reaction setup, column purification, HPLC) lab techniques, programming, and/or common graphics software (e.g., Photoshop) will be advantageous.
• Highly motivated and passionate about scientific research
• Good spoken and written communication skills
• Team player
• Receptive and detail-orientated

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Role Overview

• To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

Cash Handling and Reconciliation: Receive and verify cash bags collected by couriers, ensuring quantities match Trust Receipts. Sort, pack, and seal cash bags for delivery to designated banks.
Issue and maintain manifests and Trust Receipts. Coordinate with couriers for bank deposits.
Manage cash float exchange, including packing, receiving, and banking.
Generate detailed reports on all cash transactions, including bags received and issued.
Maintain accurate records of float funds and conduct regular stock counts.

Inventory Management: Assist in issuing consumables to customers.
Record and track the quantity of consumables in and out of the vault.
Participate in periodic stocktaking of cash and consumables.

Security and Compliance: Adhere to strict security protocols and procedures to safeguard valuable assets. Maintain a secure and controlled environment within the vault. Ensure compliance with relevant regulations and internal policies.

Job Requirements:

• Previous experience in cash handling or a similar role preferred
• Strong attention to detail and accuracy
• Ability to work independently and as part of a team
• Excellent organizational and time management skills
• Strong numerical skills and basic computer literacy
• Ability to work in a secure environment with strict adherence to procedures
• Valid identification and clean background check
• Experience with vault management systems and security protocols
• Knowledge of relevant regulations and compliance standards

Role Overview

To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

• To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations
• To lead technical investigations in response to fault calls
• To review documentation on procedure and schedules of maintenance works
• To track inventory levels of spare parts, consumables and non-consumable items
• To prepare technical reports and / or monthly reports where required
• To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices
• Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.
• Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.
• Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.

Role Overview

To assist in technical investigations in case of fault calls and regularly review the preventive and corrective maintenance activities for property in the aviation sector. He / She should be a competent problem solver on the ground, possessing strong technical knowledge in building and M&E maintenance and ability to liaise with service providers to ensure maintenance or repair works are carried out timely.

Role Responsibilities

To review preventive and corrective maintenance works to ensure adherence to quality and safety standards and regulations

To lead technical investigations in response to fault calls

To review documentation on procedure and schedules of maintenance works

To track inventory levels of spare parts, consumables and non-consumable items

To prepare technical reports and / or monthly reports where required

To conduct risk assessments in accordance to regulatory and organisational Workplace Safety and Health(WSH) policies and practices

Responsible for initiating and tracking all purchase requisitions and closing of work orders, including thepreparation of costing for all proposed works to his supervisors for approval and liaison with client reps.

Liaising with term and adhoc contractors for all appointed works and coordinating with relevantstakeholders for approval and work executions, including reporting work progress and completion.

Reporting to the Engineer and appointed reporting supervisor for any adhoc work matters.