Total 50 Senior Executive process improvement manager job vacancies in d22 jurong jurong island tuas

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

Reporting to Senior Manager, Technical & Planning, this position will provide technical support for manufacturing process to ensure production complies strictly with Company’s quality & safety standards and environmental regulations. This role will also be in charge of performing investigation to identify root causes for plant troubles and implement countermeasures, and driving plant optimization initiatives.

Responsibilities

• Oversee plant performance, issue operating instructions, conduct root cause analysis, investigate process failures and recommend appropriate solutions or corrective actions
• Coordinate Safety Case activities and liaise with other departments to ensure completion of all follow up actions as well as to review and revise Safety Case reports
• Lead HAZOP studies and other process safety assessments
• Handle raw materials and utility consumption analysis and efficiency improvement drive, which include managing evaluation meetings, participating in contract discussion and negotiation with suppliers and following up on action plans and other operational tasks
• Plan and conduct trial production for new products or raw materials, and initiate optimization ideas for process and process safety improvements
• Perform technical and process safety studies and share knowledge with other team members
• Conduct training for Plant members and in-house contractors and review and improve existing training materials
• Coordinate Management of Change and support plant investment and infrastructure projects such as budget planning, monitoring project progression and scheduling project meetings
• Maintain and improve Integrated Management System such as reviewing and developing standard operating procedures and maintaining proper certification and documentation

Requirements

• Bachelor’s Degree in Chemical Engineering or related discipline with working experience in chemical/polymer plant preferred
• Entry level candidates without experience can be considered
• Meticulous, self-driven, independent and resourceful
• Possess good analytical thinking and problem solving skills
• Effective team player with good communication and presentation skills
• Proficient in Microsoft Office applications
• Able to perform overtime work when required
• Willing to work on Jurong Island

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are “Solar’s most trusted”!

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.
• Support production line issues with appropriate and permanent corrective solution, as and when necessary.
• In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.
• Support investment proposals and projects in order to utilize best available practice and competence.
• Support managements’ directives and projects as and when needed.
• Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Module PD Engineer

• Candidate working in Module PD is responsible for development of the bill of materials (BOM) used in the PV module.
• Responsible for redesign of parts for cost and process improvement through alternative components, parts reduction, jigs and fixtures, and increasing yield, reducing cycle time and improving quality
• Excellent knowledge in material structure performance and provide direction of how best the appropriate materials could be introduced and change to meet the overall cost targets.

Knowledgeable in establishing, sourcing and developments of new materials, new designs and alternative vendors (such as Glass, EVA, Back Sheet, Frame, junction box, etc.) to meet the overall process, production and cost improvement targets.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline )
• 3 years or more experience for engineer position
• 7 years or more experience for senior engineer position
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or Solar.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

Job Duties

• Under broad direction, identifies user requirements and assists with the design, development and documentation of supply chain business processes.
• Assists in the development of user training and works with users to ensure that processes are correctly followed.
• Communicates with supply chain business units to ensure business needs are met.
• Is an advocate to the business unit and user community.
• Coodinates and conducts user training.
• Assists in supervising others. Provides basic job training and guidance on a regular basis; performs work of same or closely allied nature.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.

Requirement

Skills are typically acquired through completion of an undergraduate degree in a Technical, Supply Chain, or Business related field and 4-10 years of experience in a supply chain related field. Should have direct experience in and extensive knowledge of supply chain business processes and process management techniques.

Primary Purpose

Functions as a technical specialist in water / wastewater treatment process. Performs all aspects of conventional design engineering and analysis independently. Broadens knowledge and skill set in area of discipline. Knowledge in other disciplines and/or functional areas.

Roles & Responsibilities

• Detailed design of process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants, sludge treatment plants, desalination process, etc.
• Detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems.
• Preparation of Process Flow Diagrams and P&IDs.
• General Arrangement and equipment layout drawings.
• Preparation of process equipment specifications.
• Review and evaluation of vendor submissions.
• Coordination with other disciplines e.g. civil, structural, electrical, mechanical, building services, instrumentation & control designers and digital water specialists.
• Able to lead meetings, HAZOP, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Prepare testing and commissioning plans
• Process Testing & Commissioning
• Keeping abreast with latest development in water treatment technology and suitably applies in the design

Candidate shall have minimum of 12 years’ experience in the process design of water / wastewater treatment (municipal and industrial) with the following attributes:

1. Degree in Chemical or Environmental Engineering.
2. Expertise in water / wastewater treatment process modeling and optimization (including biological treatment).
3. Proficient in BioWin/GPS-X/SUMO or other wastewater modelling software.
4. Possess knowledge of wastewater treatment processes such as Activated Sludge, SBR, MBR & MBBR/IFAS.
5. Experience in preparing PFDs/P&IDs and specifications for procurement of water and wastewater process equipment.
6. Proven ability to manage diverse and large scale water projects, prioritize tasks, effectively.
7. Utilize available resources and ensure timely completion of projects.
   Proficient in written and oral communication with good interpersonal skills.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Be the key driver to ensure that REC Modules deliver world class leading top quality product through well controlled process and manufacturing flow, from material supplies to product deliveries.

Be key driver to ensure improvement, qualification and implementation of new processes/products including changes and/or new product introduction, are in-line with the overall production performance enhancement targets.

Support production line issues with appropriate and permanent corrective solution, as and when necessary.

In plant expansion phase, work closely with process/equipment/technology and contribute to establish good product quality and specification.

Establish investment proposals and projects in order to utilize best available practice and competence.

Support managements' directives and projects as and when needed.

Possessed very good ability in project management, providing key milestone, timeline and execution, overseeing the completion of project on time.

Candidate working in Cell PD is responsible for development new cell processes or optimize existing processes in Solar cell Manufacturing.

Candidate will need to work with external suppliers to bring in new materials or integrate new processes into the current cell processing line. Candidate will also work on continuous improvement projects to improve the cell efficiency and cost of a solar cell.

Candidate with semiconductor or solar cell background would have an added advantage.

Able to mentor junior cell PD engineers and be a role model for them.

Depending on the competencies developed, process development will be required to be rotated to different departments as required by management.

• Degree in engineering disciplines (electrical, mechanical, mechatronics, material science or related discipline)
• 5 years or more working experience
• Knowledge in product design environment.
• Knowledge of interpreting design intent for DFM and DFA
• Strong knowledge of semiconductor or PV.
• Knowledge in Prototype PV Module design functionalities that ensure good quality and manufacturability would be an advantage
• Knowledge of product functionality of PV modules/panels would be an advantage
• Good presentation and communication skills
• Must be able to work independently and knowledgeable in project management
• Supportive in other job functions assign by superior

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

Job Responsibilities:

• Perform system data entries and related functions for customers and ”Internal Warehouse Management System” (iWMS)
• Coordinate with customers and internally for Operation and inventory-related matters
• Ensure all paperwork, system, and filing is completed on time and accurately
• Plan and follow up on Orders to ensure on-time delivery
• Maintain accurate and updated inventory records
• Generate accurate billing invoices, inventory reports, and related reports as per the required deadline
• Attend to customer inquiries and ensure all requests and issues are resolved
• Any other duties assigned

Job Requirements:

• Minimum 'O' / 'N' Levels
• Positive attitude, detail-oriented, organised, and able to prioritise tasks
• Good interpersonal, communication and analytical skills
• Good command of English (written and spoken)
• Ability to work independently and under pressure in a fast-moving environment
• Able to work as a team player, pro-active, self-motivated and high sense of responsibility
• Entry level candidates are welcome to apply

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Duties and Responsibilities

• Communicate, promote and manage the company’s vision with respect to HSE standards, behaviour and performance.
• Communicate and promote a ‘Process Safety’ culture that supports continuous HSE improvement and actively engage workers through company-wide programs.
• Ensure appropriate resources are made available to develop, document, implement, maintain and comply with Process systems and programs.
• Regulatory and environmental compliance.
• Perform regular site inspections and training and Process safety meeting to assure safety and performance compliance.
• Ensure Process safety agenda, priority, and work plan were delivered as agreed,
• Perform employee performance reviews and continuous improvement programs.
• Conduct, perform, document and track Process Incident Reports and Incident Investigations.
• Develop and lead Process Hazard Analysis (HA) on existing and new processes.
• Develop and provide oversight and conduct audits for the site Management of Change (MOC) Process.
• Develop and provide oversight and conduct audits for Pre Start-up Safety Reviews(PSSR).
• Participate in Individual Disciplinary Action Discussion related to Safety or Performance Issues while working with Department Managers towards corrective action.
• Responsible for implementation and continual improvement of the site process safety, loss prevention and contractor safety.
• Perform any other duties as assigned.

Qualifications and Skills

• Diploma or Bachelor Degree preferable in Engineering.
• 5 years of supervisor and above.
• Preferably with 5 years of relevant working experience in oil and gas industry.
• Strong knowledge of process safety and good business sense.
• HAZOP and PSSR facilitator.

Reporting to Technical & Planning Department Manager, this position will provide technical and process safety support for the manufacturing process to ensure production complies strictly with Company’s quality & safety standards and environmental regulations. This role will also be in charge of performing investigation to identify root causes for plant troubles and implement countermeasures and driving plant optimization initiatives.

Responsibilities:

• Oversee plant performance, issue operating instructions, conduct root cause analysis, investigate process failures, and recommend appropriate solutions or corrective actions.
• Coordinate Safety Case activities and liaise with other departments to ensure completion of all follow up actions.
• Lead HAZOP studies and other process safety assessments
• Handle raw materials and utility consumption analysis and efficiency improvement drive, which include managing evaluation meetings and following up on action plans and other operational tasks.
• Plan and conduct trial production for new products or raw materials, and initiate optimization ideas for process and process safety improvements
• Perform technical and process safety studies and share knowledge with other team members
• Conduct training for Plant members and in-house contractors
• Coordinate Management of Change and support plant investment projects such as budget planning, monitoring project progression and scheduling project meetings
• Maintain and improve Integrated Management System such as developing standard operating procedures and maintaining proper certification and documentation.
• Anticipate potential operational issues and recommend appropriate corrective actions.
• Promote continuous development and implementation of improvement ideas to enhance manufacturing competitiveness level

Requirements:

• Master’s Degree in Chemical Engineering or Polymer with 7 to 12 years or Bachelor’s Degree in the same discipline with 9 to 14 years of relevant working experience in Chemical Engineering in a polymer plant
• Strong leadership and communication skills and effective team player
• Self-motivated, independent and resourceful
• Proficient in Microsoft Office applications
• Knowledge in HAZOP, Risk Assessment, DCS, ISO standards would be advantageous
• Proficient in Japanese language as the role is required to liaise with counterparts and understand the Company policy and standards from Japan Headquarters
• Able to perform overtime work when required
• Willing to work in Jurong Island
• Overseas travelling is required

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Duties

• Under broad direction, identifies user requirements and assists with the design, development and documentation of supply chain business processes.
• Assists in the development of user training and works with users to ensure that processes are correctly followed.
• Communicates with supply chain business units to ensure business needs are met.
• Is an advocate to the business unit and user community.
• Coodinates and conducts user training.
• Assists in supervising others. Provides basic job training and guidance on a regular basis; performs work of same or closely allied nature.
• Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
• Consequences of error are easily measured and can be confined.

Requirement

Skills are typically acquired through completion of an undergraduate degree in a Technical, Supply Chain, or Business related field and 4-10 years of experience in a supply chain related field. Should have direct experience in and extensive knowledge of supply chain business processes and process management techniques.

Responsibilities:

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation).
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID, Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.

Requirements:

• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above.
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8.00am - 5:15pm

Fri: 8.00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

Main roles & responsibilities:

· Sourcing for equipment or materials and services.

· Follow-up with Vendor / Sub-contractor on quotation

· Setting up meeting for Engineer/Project with Vendor / Sub-contractor.

· Evaluate commercially

· Negotiation

· Prepare PO through SYNERGIX ERP

· Expediting

· Co-ordinate for inspection and shipment & collection of material

· Perform GRN

· Follow-up with Vendor on document submission.

Requirements:

· Diploma in Engineering or its equivalent

· 1 or 2 years purchasing experience in project for Oil & Gas, Petrochemical Industries, etc

· Familiar with SYNERGIX ERP but not essential

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

General Description

The incumbent is responsible to provide technical process support to the Production Shift teams and the Facility Owner of the process area in the LNG Terminal.

Roles and Responsbilities

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

• Provide technical support for routine and non-routine production activities and develop best practices to improve production safety, reliability and efficiency.
• Evaluate current production activities, make recommendations and execute continuous process improvements in the areas of safety initiatives, equipment reliability and operational excellence.
• Troubleshoot for process and equipment problems to ensure greater operational reliability and efficiency
• Measure plant performance including power consumption index, operating index relating to process availability, efficiency and reliability and other relevant field data surveys.
• Undertake energy efficiency and optimisation projects as required.
• Undertake alarm management for assigned area and proactively drive alarms to ensure robust operations.
• Undertake Management of Change (MOC) for terminal modifications and take on lead role for various MOC projects as required
• Support engineering design analysis including preliminary design development, (heat and mass) calculation, technology evaluation and equipment selection.
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, model reviews, Safety Integrity Level reviews, RAM analysis, layout and other process etc and support the design validation process in alignment with contract and regulatory requirements and specifications.
• Review standard operating procedures and start up manuals to ensure compatibility with design limitations and procedures are adequate.
• Lead, review and perform inspection and investigation of equipment and production systems to facilitate optimisation and formulate remedial procedures.
• Assist the Production Manager to report and investigate any related HSSE near miss / violation.
• Custodian of Operation Abnormality Reports, to manage the overall status of the reports, perform initial investigation to determine root cause and to drive root cause analysis and resolution.
• Participate in emergency response and may be assigned to a specific role and responsibility for such purpose.

Work Experience

• Minimum of eight (8) years practical experience in process engineering function in an oil, gas or petrochemical industries.
• Conversant with local/international codes, regulations, standards, best practices in the process.
• Good knowledge of commissioning, operations and troubleshooting of a variety of large and complex processes in the oil, gas or petrochemical industry is critical.
• Knowledge of the LNG / natural gas or other hydrocarbon industries would be advantageous. Candidates with experience in cryogenic plant design, commissioning and start-up are preferred.
• Certified Energy Manager certification will be an advantage.
• Knowledge of Process Safety Management, Process Hazard Analysis and Functional Safety would be advantageous
• Knowledge of electrical, instrumentation, controls and mechanical discipline would be advantageous
• In addition, the successful candidate should possess the following personal attributes:

1. Highly analytical and meticulous.
2. Self-motivated, independent and strong team player
3. Strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties.

Education

Bachelor degree in Chemical Engineering

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team.

Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scopes & Responsibilities

• Support NPI and Site projects as Engineering Technical Lead or Subject matter experts for process equipment
• Provide technical expertise in site selection assessment to identify equipment/facility gaps, select new equipment, assess layout/utilities capacity and partner project managers to develop project cost and schedule
• Perform assessment for equipment during new product introduction, change controls and other qualifications activities to ensure equipment are in its validated state
• Subject matter expert for process equipment performance and operation to ensure safety, compliance and sustained operation
• Lead and participate in technical transfer activities and cross-functional meetings
• Work independently and/or with project managers to complete engineering projects of various scales within schedule, budget and quality constraints
• Effectively manage and work with project CQV team to ensure timely delivery of projects
• Responsible for commissioning and qualification activities including FAT, SAT, PSSR, automation checkouts, IQ, OQ, PQ, and asset/preventive maintenance/spare parts creation for new process equipment
• Participate in the system walk-down, ensure the closure of punch items and support the takeover of the system from the project team
• Work closely with project managers to introduce new equipment including development of business case, project charter, user requirement specifications, quality risk assessments, conceptual design, preliminary design, design specifications and detail design
• Participate in design review and setup up of new asset and associated maintenance plan/spares in Maximo
• Work with research, manufacturing, process development, utilities, facilities, quality assurance and validation departments in developing requirements and recommendations for large and/or highly complex system/facility modifications
• Responsible for investigation of deviations, development of corrective and preventive actions and implementation of change controls in a timely manner
• Develop, implement and optimize maintenance and reliability activities such as preventive maintenance, job plan and datasheet development in Maximo
• Benchmark equipment performance (e.g., reliability, productivity) and determine improvement plans
• Periodically review and/or improve equipment safety, maintenance strategy, spare parts, and other continuous improvement opportunities to enhance reliability
• Responsible for management and oversight of team of CQV engineers
• Develop the best team by coaching and mentoring engineers to develop their technical competency and leadership skills

Qualifications

• Doctorate degree in Engineering OR
• Master’s degree in Engineering and 4 years of directly related experience in a pharmaceutical manufacturing site OR
• Bachelor’s degree in Engineering and 8 years of directly related experience in a pharmaceutical manufacturing site
• Able to work independently with minimal of no supervision
• Experience in managing various stakeholders expectations related to process equipment in biopharmaceutical
• Good communications skills, both oral and written, including presentation skills
• Good interpersonal and facilitation skills necessary to forge consensus among competing client interests while ensuring objectives are met
• Strong analytical skills and knowledge of industry trends to identify potential improvement opportunities. Ability to combine technical problem-solving skills with business acumen to determine best business solution
• Working knowledge of biopharmaceutical processes such as chromatography, buffer / media tanks, viral filtration, tangential flow filtration is preferred. Process knowledge on inoculation, bioreactors, harvest, single use technologies and critical utilities will also be considered
• Experience in validation processes such as generation/execution of Installation/Operation/Performance qualification documentation
• Knowledge in Automation systems and processes such as RD’s, Delta-V, BMS, ladder logic and PLC
• Demonstrated project management skills (schedule/cost development, facilitation, collaboration, basic project management, completion and follow-up) and application of concepts
• Problem solving skills requiring the application of scientific and engineering theory and calculations and creative skills in the development of hypotheses and approach
• Flexibility to work off-hours
• Knowledge of Total Productive Maintenance, Reliability Centered Maintenance concepts is an added advantage

Occupation

Accounts Executive

Job Description:

• Handle Full set of Accounts both payables and receivables
• Bank reconciliation, financial reports, quarterly GST, CPF Submission, invoicing, payroll
• Have hands-on experience in MYOB accounting software and proficiency in MS Excel
• Timely preparation and closing of accounts
• The daily activities of an accounting payable and receivable and all other accounts-related duties

Job Requirements:

• Atleast 2 years of working experience in Accounting
• Minimum of Diploma in Finance/Accounting/ Banking or equivalent
• Proficiency in MYOB accounting software
• Open-minded and strong team player

SENIOR NDT ENGINEER

Job Description & Requirements

Perform Non- Destructive Testing at various sites (Ship yard)

• Liaise with clients for job requirements and arrangements.

Prepare & Review NDT Procedures

Prepare and Review NDT Reports

Train the NDT Inspectors

Qualification and Experience Requirements:

ASNT NDT Level 3 in atleast 3 NDT methods

NDT Level 2 (SNT-TC-1A) or ISO 9712 Level 2 certification in other NDT Methods

BINDT PCN Level 2 in Eddy Current Testing

Salary Range: 4200 – 4800 SGD