Total 101,533 service operations manager job vacancies in Singapore

Responsibilities

• Assist in scheduling of future appointments
• Registration of patients
• Assisting the doctors and nurses in basic medical care if needed
• Data entry of patient’s particulars into the hospital system
• Handling phone calls and enquires and providing information
• Other ad hoc duties as assigned

Requirements

• Keen interest in the healthcare/ medical industry
• No experience needed, full training will be provided
• Basic knowledge of Microsoft Office
• Able to start work immediately

Interested candidates please send a copy of your resume to [email protected]

Email Subject: Patient Service Associate

Leon Leong De Cong
R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)
EA License: 99C4599

Responsibilities:

• Greet and assist patients and their families upon arrival.
• Provide directional guidance within the facility, helping visitors locate clinics, wards, and amenities such as the kopitiam.
• Offer physical support to patients with crutches or in wheelchairs, including assistance from taxis to the entrance.
• Maintain a friendly and empathetic demeanor, addressing any questions or concerns from patients and their families.
• Support staff in managing visitor flow and ensuring a smooth registration process.

Requirements:

• Min Nitec and above
• No experience needed , Training Provided

All qualified applicants, please click “ APPLY NOW”

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Responsibilities

• Process module ownership involving regE process characterizations and advanced process developments for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop regE processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer regE processes to high volume manufacturing (Fab10), and work on continuous improvements to manufacturability.
• Address specific wafer edge issues (such as bevel defects, uniformity issues), working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving regE process margins required for meeting the mature yield goal for 3D NAND parts.
• Initiate and manage experiments to widen regE process margins as well as to test out manufacturability of next node solutions
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors’ degree or higher in Materials Science, Chemical Engineering or Physics with minimum 2 years hands-on experiences in relevant regE process developments.
• Familiarity with regE process developments and yield improvements.
• Understanding of various integration and structural impacts and constraints related to wafer edge.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.

Your primary responsibilities will be:

• Risk assessment of NAND cell reliability, identification of the process/trim/test strategy to bridge the gaps for JEDEC and internal product qualification.
• Design experiments to identify and segment the limiting reliability mechanisms impacting NAND quality.
• Design high volume electrical experiments (both wafer level and component level) and perform statistical data analysis to validate process/trims solutions required to close reliability gaps.
• Update management and provide continuous feedback to process development and product engineers on the NAND reliability status and roadmap to bridge gaps.
• Contribute to develop forward looking technology path finding for next NAND generation, including reliability risk assessment and product capability projections, identify innovative design and product features required to meet quality specification.

Required skills:

• Proven experience with NAND device structures, operations and algorithms
• Knowledge and understanding of electrical properties of semiconductor and insulator materials, semiconductor device physics and solid-state physics
• In-depth understanding of physics-based modeling of non-volatile memory and semiconductor devices failure mechanisms, reliability analysis
• Knowledge and understanding of statistical analysis and numerical computing software (Matlab, Octave, JMP)
• Knowledge and ability of scripting languages (C, C++, Matlab, Perl)
• Familiar with Big Data and database queries
• Knowledge of JEDEC standards

Working location:

• 1, North Coast Drive, Singapore 757432

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

As a Senior NAND Cell Device Engineer, in the Singapore Device Technology Development group of Micron Technology Inc., you will be responsible for electrical characterization of the NAND memory cell and develop novel device solutions for cutting-edge 3D-NAND flash technologies. You will have an exciting opportunity to develop best-in class non-volatile memories and products in the world!

Job responsibilities:

• Develop an understanding of performance & reliability requirements for new NAND cells and help refine requirements, as necessary.
• Characterize NAND Memory cell and array properties to identify device improvement directions.
• Analyse automated tester data to establish product qualification gaps, identify new device corners and improve detection capabilities.
• Contribute to the architecture and process definition for state-of-the-art NAND cell, by providing expertise in NAND device physics and array operation.
• Collaborate effectively with process, integration, product, and design engineers, to address NAND memory cell deficits and deliver improvement roadmaps.

Requirements:

• M.S or Ph.D. in Electrical or Electronics Engineering, Physics or Materials Science Engineering or similar.
• 3+ years of work experience in CMOS or non-volatile memory is preferred.
• Deep understanding of semiconductor device physics and processes.
• Knowledge of statistical methods for experiment design and data analysis.
• Solid communication and reporting abilities.
• The ability to be highly skilled at driving for results.

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization/development to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with equipment/material suppliers to achieve yield, quality, cost and risk management objectives.

Micron’s NAND Technology Integration (NTI) Singapore R&D group is looking for process development engineer to support R&D activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 3 years hands-on experience in leading edge film deposition/implant technology work. Fresh PhD/Masters graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are also welcome to apply.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

FE Central Product Integration Engineering (CPIE) HPM PI Engineer

As FE CPIE HPM (High Performance Memory) PI Engineer at Micron Technology, Inc., you will be responsible for working with global Micron network to drive HPM Product yield, quality improvement, new product introduction (NPI) through technical expertise, business process management and project execution.

Responsibilities and Tasks

• Promote worldwide synergy for improved benchmark performance and efficiency gains through global project management and execution, network BKM leveraging and enhancement, and business process creation and re-engineering.
• Active engagement with PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow in a timely manner to achieve BIC yield performance.
• Maintain and enhance domain knowledge and technical expertise, explore innovation opportunities with strategic thinking and systematic approach.
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Fab, TD, Product Engineering, GQ. Communicate and respond to issues in a timely manner. Help drive to fix the issue where necessary.
• Demonstrate ability to give effective presentations to both small and large groups on project updates and new initiative proposals.
• Periodically follow up with manager to ensure all type of goals are met and get assistance to remove obstacles.
• Travel to Micron Fab locations as necessary for face-to-face collaboration for program requirements.

Requirements

• Background in electrical engineering, materials science, transistor physics and semiconductor process knowledge.
• Experience with Semiconductor Device Physics, DRAM operations, wafer fabrication process flows, parametric/electrical test, and probe yield will be an added benefit to this position.
• Good data analysis, troubleshoot, problem solving, reporting and presentation skills.
• Good multi-tasking, verbal, and written communication skills.
• Strong interpersonal skills and customer/co-worker relationships. Successfully demonstrated teamwork skills with a strong focus on developing good team dynamics.
• Good organizational capabilities and ability to work effectively with minimal supervision.
• Intermediate to advanced PC skills including Microsoft Office.
• Ability to be flexible with job responsibilities and take the initiative to assume added responsibilities.
• Travel Required: Yes. Willing to travel as needed to support department goals
• Travel Frequency: 20-50%.

Education

• Bachelor’s degree and above in Electrical Engineering, Microelectronics, Physics, Chemistry, Materials Science or related field of study

Overview

To lead and manage a team to functional Screening Operations. The role includes but not limited to: ensure smooth running of operations at Functional Screening events, monitor and track programme KPIs to ensure KPIs are achieved, review and update policy on a timely basis.

Job Responsibilities

1. Plan and implement health screening events calendar to meet annual target.
2. Ensure programme KPIs, service standards and operational targets are met.
3. Events are carried out efficiently and within timeline.
4. Workflows are reviewed, documented and communicated to all stakeholders within timeline. All workflows are carried out according to guidelines, standards and policies.
5. Adverse events are attended to promptly and followed through according to guidelines, standards and policies.
6. Manage the resources and improve processes to deliver the KPIs of the programme.
7. Ensure the internal policy and procedures are properly documented.
8. Ensure follow up of functional screening (L2) within the target timeline.
9. Ensure accurate and timely submission of data to MOH.
10. Maintain the health screening database.
11. Analyse the screening and follow up data.
12. Engage and ensure team members are guided to deliver the desired team results.
13. Carry out projects/assignments as and when assigned to deliver expected results of projects/assignments.

Job Requirements

• Bachelor degree in any discipline
• Minimum 5 years of working experience, preferably in healthcare.
• Good verbal and written communication skills
• Microsoft office (Excel, Word, Powerpoint)

As a Senior- level Device Engineer in Micron's Front End Central Process Integration Engineering (cPIE) team, you will co-work with the global Micron network on improving Device performance to meet product yield and quality requirements, through optimizing process steps, reducing device variability, optimizing design layout or test specs, and standardizing device engineering business process and working methodology. The primary focus could be either DRAM or NAND flash memory when needed.

Requirements:

• Bachelor's degree with a minimum 5 years of relevant working experience is required. Master's or Ph.D. degree in Physics or Engineering areas is preferred.
• Working experience in fab process or process integration or test engineering. Direct experience in CMOS or NAND/DRAM memory device engineering is preferable.
• Require proven knowledge in semiconductor physics and understanding of transistor operations, scaling limitations and reliability, basic knowledge of CMOS circuits and characterization methods. Experience in advance transistor architectures such as High-K metal gate or FinFET or GAA is preferred.
• Deep understanding of at least one semiconductor fabrication process area, including tool sets, process mechanism, tuning knobs, etc.
• Excellent data analysis skills using at least one software (JMP, SPOTFIRE, etc).
• Strong task ownership, self-motivated to work with other team members to make progress collaboratively.
• Open-minded attitude to learn new skills and could adapt to new working environment swiftly.
• Good communication skills. Proficient in English (speaking and written). Working-level communication capability in Mandarin Chinese OR Japanese is preferred.
• Good digital literacy with MS office. Programming capability such as Python is a plus.
• Occasional domestic and international business travel is required.

Job responsibility:

cPIE Device Engineer, responsible for product yield and quality improvement, by working collaboratively with Micron global network, to improve device performance, standardize business procedure and working methodology.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities

• Leading the design, development and characterization of new tools and identifying and closing any hardware and procedural gaps.
• Innovate solutions that enable best in class performance
• Oversee installation and upgrades of tools ensuring quality of work, cost control and alignment to project schedule.
• Engage equipment vendors to improve current products and implement roadmap needs.
• Work with Process Engineers, Manufacturing, Procurement, and Vendor partners to develop a comprehensive package capable for our volume manufacturing sites.
• Generating and maintaining documents that outline equipment performance, operating procedures, maintenance specifications, and cost metrics.
• Support Internal And External Audits

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

Your primary responsibilities will be:

• Risk assessment of NAND cell reliability, identification of the process/trim/test strategy to bridge the gaps for JEDEC and internal product qualification.
• Design experiments to identify and segment the limiting reliability mechanisms impacting NAND quality.
• Design high volume electrical experiments (both wafer level and component level) and perform statistical data analysis to validate process/trims solutions required to close reliability gaps.
• Update management and provide continuous feedback to process development and product engineers on the NAND reliability status and roadmap to bridge gaps.
• Contribute to develop forward looking technology path finding for next NAND generation, including reliability risk assessment and product capability projections, identify innovative design and product features required to meet quality specification.

Required skills:

• Proven experience with NAND device structures, operations and algorithms
• Knowledge and understanding of electrical properties of semiconductor and insulator materials, semiconductor device physics and solid-state physics
• In-depth understanding of physics-based modeling of non-volatile memory and semiconductor devices failure mechanisms, reliability analysis
• Knowledge and understanding of statistical analysis and numerical computing software (Matlab, Octave, JMP)
• Knowledge and ability of scripting languages (C, C++, Matlab, Perl)
• Familiar with Big Data and database queries
• Knowledge of JEDEC standards

Purpose and Scope

• Responsible for the daily deployment of drivers and crews
• Assist with daily planning of days and nights routes and CRM bin deliveries
• Conduct site visits and attend complaints from public and clients
• Carry out accident investigation, accident reporting and any other related issues
• Conduct Toolbox Briefing
• Checking of vehicles and ensure all are in proper working condition before deployment
• Monitoring of crews’ discipline and attendance
• Compiling and monitoring of sector tonnages
• Route auditing and reporting of excess refuse
• Supervising crews/vehicle movement and routes
• Assist manning customer relations
• Reporting and Follow-up with Town Councils / NEA
• Co-ordinate logistics matter on special projects
• Working together with HSE Team and assist with the maintenance of the overall depot safety and movements within
• Working with Fleet Management on Vehicle planning issue for inspection and etc
• Upkeep of company assets including vehicle, first aids & spill kits
• Perform coverage of duty when there’s shortage of manpower (driver / crew)

Qualification, Skills and Experience

• Completed GCE O level / Diploma in any discipline with at least 2 years’ experience in Logistics / Operations Management
• Preferably with own transport
• Proficient in Microsoft office application
• Preferably with Class 4 license
• Good interpersonal and communication skills
• Able to commit to rotating weekend/ Public Holiday duties and rotating early deployment duties as early as 6.30am

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

ROLES & RESPONSIBILITIES

Supervise day-to-day operating process and maintain daily operation.

Monitor and maintain process quality according to company standards.

Ensure that the workplace is properly maintained and clean.

Maintain a positive and professional approach with customers.

Resolving of conflicts in a professional way.

REQUIREMENTS

Minimum 3 years relevant experience

Good team management skill

Strong analytical, problem-solving & decision-making skills

Must hardworking and responsibility.

Nomura Overview
Nomura is an Asia-based financial services group with an integrated global network spanning over 30 countries. By connecting markets East & West, Nomura services the needs of individuals, institutions, corporates and governments through its three business divisions: Retail, Asset Management, and Wholesale (Global Markets and Investment Banking). Founded in 1925, the firm practices disciplined entrepreneurship while building on a long tradition of serving clients with creative solutions and considered thought leadership.

Department Overview
Nomura's Operations department supports the company's business activities through efficient operational processes. The team collaborates with senior leadership, business units, and stakeholders to develop effective operational strategies, providing guidance on process design, implementation, and management to align operations with business objectives. Nomura's Operations team specializes in trade processing, settlement, custody, and asset servicing, known for providing exceptional service to clients. With a strong track record and commitment to innovation and global reach, Nomura's Operations department is well-positioned to continue driving growth and success in the financial industry

Role Description:
You will form part of the AEJ Shared Services team. Shared Services support the Global Markets activities across multiple asset classes and is responsible for Asset Services, Tax Operations, Network Management, Settlements, Confirmations and Listed Derivative.

You would work closely with the business and senior managers to help drive new initiatives/ projects, utilizing data to optimize processes and facilitate decision making.

You will be tasked with learning the business and processes, to identify and implement solutions to enable business initiatives. You will work with the Shared teams and collaborate with other teams within Operations and other Corporate divisions.

The right candidate should have the interest to expand and develop their business knowledge across multiple domains, be adaptable to manage changes and work closely with stakeholders in different locations.

Main responsibilities are:

• Review and manage risks across multiple Shared functions
• Effectively work with teams to map business processes
• Gather and communicate requirements/information from stakeholders
• Engage with and presenting to management and wider teams.
• Identify areas of inefficiency, reoccurring issues, quality improvement and remediation.
• Identify opportunities to improve and automate manual processes, and drive change where required.
• Manage a broad spectrum of stakeholders.

Skills, experience, qualifications and knowledge required

• Degree with minimum 5 years of working experience in a financial institution. Experience in a Global Markets/Investment Banking environment preferred.
• The preferred candidate would have demonstrated their adaptability by working in different teams/ departments across Middle and Back Office.
• Knowledge in listed derivative processing will be an advantage
• Experience in managing offshore teams and external vendors will be an advantage.
• Strong organizational skills, able to multi-task, track and meet deliverables before agreed deadline.
• Attention to detail with strong logical thinking and analytical skills. Able to produce and articulate solutions to stakeholders.
• Strong communication and interpersonal skills
• Expertise in technical skills such as VBA, Python and data analysis skillsets will be an advantage.

Diversity Statement
Nomura is committed to an employment policy of equal opportunities, and is fundamentally opposed to any less favourable treatment accorded to existing or potential members of staff on the grounds of race, creed, colour, nationality, disability, marital status, pregnancy, gender or sexual orientation.
DISCLAIMER: This Job Description is for reference only, and whilst this is intended to be an accurate reflection of the current job, it is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. The management reserves the right to revise the job and may, at his or her discretion, assign or reassign duties and responsibilities to this job at any time.

SFID: 8513

When you join MSB Industrial Engineer (IE) team, you will be learning the skills for capacity modeling, capital planning & execution and factory commit. In the course of work, you'll be exposed to counterparts from a diverse range of backgrounds and teams and will have opportunity for contributing to the organization while learning from each other. You're also part of the team that produce data and analyses supporting factory critical metrics decision making that include (but not exhaustively) capital expenditure, loading (revenue) commit and equipment performance improvement activity, Some aspects of the work are below

Modeling

• Perform line study for setting up capacity model
• Apply statistical analysis to acquire model parameters and Factory Operation related buffer strategy
• Work with relevant teams for auditing and updating model parameters (utilization, UPH, overhead, etc)
• Maintain Factory Planning Master Data in a manner that supports capacity analysis, factory scheduling, supply planning and multi-functional reporting needs
• Use Microsoft Excel and other applications to supplement standard model for quick turn-around analysis

Strategic Planning

• Maintain robust database of key improvement activities and equipment delivery
• Perform capacity analysis loading plan for setting boundary condition, submitting capital requirement and requesting key activities for throughput improvement
• Perform bottoms-up analyses of approved loading and modeling changes
• Coordinate space planning for incoming tool with facility, relevant equipment and manufacturing team members
• Engage in factory space optimization and network capital optimization by identifying under-utilized/obsolete capacity for transfer, re-sale and/or scrap

Factory Commit

• Engage in weekly factory commit activity in collaboration with Factory Planning and Operation teams (current quarter / rolling 13 weeks), and Central Planning teams (up to 9 months)
• Submit equipment and tooling purchase request and coordinate downstream activities: PO release, space enablement, delivery and production release
• Comprehend Tactical Operation constraint in identifying dynamic constraint workstation for robust factory loading commit
• Collaborate with Strategic Scenario and Capital Planning team on investigation of tactical boundary condition comparison with strategic boundary condition

Capital Planning

• Take charge of capacity related capital and Off-Capital items through capital lifecycle: proposal à disposal through appropriate business process and in timely manner
• Strive for capital optimization through network balancing
• Maintain capital related information in system and offline database for own area (capacity and non-capacity related) in robust manner

Space Planning

• Collaborate with Facility IE team on detailed space enablement plan for incoming tools
• Maintain database of incoming and excess tool list for communication with Facility IE

Reporting

• Understand assumptions in reports and use them effectively
• Develop and maintain reports that effectively communicate capacity information

Project Management

• Run regular meeting, take meeting minutes, record action items and ensure closed-loop and accurate completion of action items
• Use established project management approach and methodology when serving as project manager

Continuous Improvement

• Possess a continuous improvement process (CIP) approach where you are always looking for ways to improve current way of doing things
• Apply new (e.g. RPA, Tableau, Power BI) and traditional (Excel, VBA) methods to improve and automate tasks & visualization in the planning system/models

Compliance

• Finishes the required training timely
• Conducts all work in accordance with Micron EHS (Environment, Health, Safety) and ethics policies
• Provide timely feedback when quality, safety, or ethical issues arise

Requirements:

• Degree in Industrial/Mechanical/Computer Engineering and Computer Science preferable
• With at least 2 years of CCA in university, preferably in leadership positions.
• Good in written communication and presentation skills.
• Highly motivated to work in a dynamic environment, with good integrity and character.
• Programming skill will be an added advantage.
• Ability to quickly analyze situations, identify issues, and develop effective solutions under tight deadlines.
• Demonstrated capacity to maintain composure and productivity in high-pressure environments, adapting to changing priorities and challenges.
• Proven ability to prioritize tasks, manage numerous projects simultaneously, and meet deadlines without compromising quality.
• Previous internship experience in a related field, demonstrating practical application of skills and knowledge in a professional setting will be an added advantage.
• Keen in semiconductor industry
• Possess advanced Literacy and Numeracy skills

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

Description

As a NAND CMOS Process Integration Engineer in the Singapore Technology Development department at Micron Technology Inc., you will be responsible for developing 3D NAND CMOS devices scaling and enhancing their performance, reliability and manufacturability.

Responsibilities:

• Develop and innovate critical CMOS modules. Drive multi-functional teams to optimize existing process flows and develop new innovative solutions to meet product requirements and manufacturability.
• Develop/re-define critical specifications criteria for optimum product performance and drive activities to get them to manufacturing process capability.
• Extract and analyze inline, probe, parametric, reliability, and other critical metrics and predict future behavior of the CMOS device performance of the product to enable early innovative solutions to meet product and device specifications.
• Early introduction, characterization and validation of new CMOS device models and test structures for developing future NAND products.
• 3 dimensions analysis with the use of K2 view to extract layout information and combine with the doping profiles of each implant step for product development and integration solutions.
• Interact and collaborate with TCAD, modeling, and layout teams to drive clearer definition of CMOS device and reliability improvements across multiple tech-nodes and designs.
• Coordinate activities at manufacturing site towards gating experiment funding, conversions, and effectively communicate decisions made to all R&D, manufacturing, and relevant partners.
• Take on leadership role at quarterly yield summits and monthly program reviews in summarizing complex problems, deriving and explaining actions taken to address them and getting R&D, manufacturing, and senior management teams on the same page.
• Assist in the transfer of a new technology from R&D to manufacturing and contribute towards ensuring successful ramp and qualification. Supporting the transfer, documentation and training of module fundamentals into manufacturing.

Requirements:

• MS or PhD in Electrical Engineering preferably specialized in Microelectronics and Semiconductor Device Physics. Prior technology development and tech transfer/manufacturing experiences are preferred.
• Fresh MS/PhD candidates with knowledge of semiconductor process Integration, device physics and CMOS engineering.
• Direct fab experience with nonvolatile memories manufacturing, knowledge of TCAD, K2 view layout, and NAND product are highly desirable.
• Ability to develop a strong, holistic, end-to-end understanding of CMOS device and its related module on NAND technologies, related structural and electrical fail mechanisms.
• Deep understanding of probe failure mechanism, ability to do electrical bench data collection.
• Self-motivated, self-governing with proven ability to work in a demanding and dynamic environment.
• Experienced in coordinating cross-functional teams to achieve a goal.
• Solid data analysis, communication and reporting abilities with demonstrated presentation abilities.
• Curiosity and natural tendency of learning new things independently.
• Ability to travel for extended periods of time to the US for collaborative R&D work.

Working Location: Fab10, 1 North Coast Drive, Singapore 757432

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

Mandai Wildlife Group is the steward of Mandai Wildlife Reserve, a unique wildlife and nature destination in Singapore that is home to world-renown wildlife parks which connect visitors to the fascinating world of wildlife. The Group is driving an exciting rejuvenation plan at Mandai Wildlife Reserve, adjacent to Singapore’s Central Catchment Nature Reserve, that will integrate five wildlife parks with distinctive nature-based experiences, green public spaces and an eco-friendly resort.

Main Duties & Responsiblities:

Pre-Opening

• Write, review and update Standard Operating Procedures (SOPs) and Risk Assessment (RA) to ensure they are clear, easy to follow and compliant with industry standards, regulations and internal policies.
• Work closely with procurement to purchase, coordinate the deliveries and move-in of the furniture, fittings and equipment.
• Create and lead test scenarios to stress test the equipment, systems and processes. To be able to identify and resolve gaps.
• Lead the hiring process including recruitment, interviews and selection of the team members.
• Conduct familiarisation and onboarding trainings for the team members.

Attractions Operations

• Perform attractions wide and department duty coverage role, providing communications to other departments, including incidents management.
• Perform shift responsibilities and ensure smooth day-to-day operations of the attractions including queue and crowd management and ensuring attractions cleanliness and show quality.
• Manage ticketing and cash handling procedures.
• Ensure all attractions operate in accordance with safety regulations, quality standards and company policies
• Ensure delivery of excellent guest experience, including management of guest feedback on-ground and closing service lapses.
• Review, propose and execute ideas to improve business growth, attraction enhancements, safety standards, guest experience and operational efficiency
• Recruit, train, and develop team members to maintain high levels of engagement, performance, safety and guest services, fostering a collaborative and performance-driven environment.
• Responsible for team members management, including manpower planning/deployment and performance reviews to ensure high employee morale and productivity.
• Assist to generate reports and perform data analysis.
• Assist in wildlife management efforts.
• Manage assigned portfolio and projects.
• Other relevant duties as assigned.

Job Requirements

• Diploma or Degree.
• At least 3 years of relevant experience, preferably with experience in leadership and project management.
• Attractions’ experience will be an added advantage.
• Service driven, pleasant, courteous, and confident disposition.
• Excellent communication skills with good command of written and spoken English.
• Excellent team player who can also work independently.
• Resourceful self-starter with a keen work attitude, good with time management and problem-solving.
• Proficient in Microsoft Office applications (Word, Excel and Powerpoint).
• Able to work on rotating shifts including weekends and public holidays.

5 days’ work week (rotating off day either Saturday or Monday)

Afternoon shift (1500 – 0030),

Night shift (1800 – 0330)

This position is responsible for the Air Export operations and support internal department to meet customer satisfaction.

Job Description

-Coordinate with Customer Service and Warehouse on operation matters

-Process Shipping Document and execute AWBs

-Ensure accurate input of dimension, weight , rates and other data into system

-Perform check and verification of compliance for DG and Temperature Control cargo

-Send pre-alerts to overseas destination

-Monitor consol cut-off and cargo lodge in time for urgent shipment

Pre-Requisite of candidate:

-Must be PC-liberate and comfortable using or learning software

-Must be a Team Player and able to work independently

-Must be careful, meticulous and self motivated

-Must possess a sense of urgency and responsibility in work

-At least 1-2 years of working experience.

- training will be provided

-Prior work experience in this industry is not required, but will be advantageous if have

-Shift operation Job

• Position: Operations Manager (Fast Food Chain)
• Working Hours:5 days, 8.30am- 6pm
• Salary: $6500 -$8000 + $500 transport allowance
• Location: Geylang, and required to travel to 15 branches. Company will be moving to Woodlands Senoko in 2026

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job scope:

• Analyse data relationships, patterns and trends to gain important insights and make informed decisions
• Develop and maintain business continuity strategies, policies and guidelines
• Establish business continuity processes
• Provide leadership during crisis situations
• Direct negotiation policy and develop negotiation limits
• Facilitate innovation and lead managers to manage change
• Establish and maintain strategic business partner relationships
• Resolve conflicts with stakeholders
• Develop service recovery framework
• Drive customer loyalty for service excellence
• Develop and establish financial budget and plan
• Drive service quality and customer satisfaction
• Create original applications or ideas to reveal new possibilities and reshape goals through high level of innovativeness
• Facilitate innovation process within the organisation
• Lead by example at organisational level. Inspire, motivate and guide others to adopt a point of view, make changes or take action. Cultivate an open, cooperative and collaborative learning culture for the organisation
• Champion a service excellence ethos
• Lead managers to develop organisational and governance strategies
• Establish strategies for the allocation and deployment of resources efficiently and effectively
• Foster business relationships and organisational diversity
• Strategize workforce for service excellence
• Provide mentorship to help others in their professional and personal development to improve performance and further their careers
• Develop managers and high-potential employees through organisational talent capability reviews
• Develop self to maintain professional competence to lead an organisation
• Develop a business plan
• Establish business strategies for the business function
• Establish operational plans for the business function
• Strategize service operations
• Anticipate potential problems beyond the current scope and apply higher order problem solving tools and techniques to turn problems into opportunities
• Lead programme and project after-action review
• Develop a risk management framework, policy and process
• Manage compliance with F&B hygiene policies and procedures
• Manage revenue management

Requirements:

• At least Diploma in Business Management or any related fields
• Minimum 8 years’ experience in F&B operations with at least 3 years’ experience in leading at least a market chain outlets as Operations Manager or equivalent
• Ability to forecast and follow through budgets
• Set business plans and strategies with control in place
• High analytical skills to identify opportunities and trends in making business decisions
• Excellent computer skills in Power point, Words & Excel
• lf-initiate with inter-department leaders to develop plans to meet business KPIs
• Set vision and lead the team to achieve business results

Working Hours: 5.5 before confirmation: Mon-Fri: 8.30am to 5.30pm & Sat: 8.30am to 12.30pm

Responsibilities:

1.Import

• Check Incoming pre-alert from customer/oversea, check instruction.
• Quotation to customer/oversea agents.
• Declare Customs permits, key jobs, do Delivery Order for arrange delivery/ release cargo.
• Once Cargo back to warehouse from clearance need to check cargo.

2. Export

• Waiting for Customer Services passes down jobs to follow Shipping instruction & create draft AWBs for customers /Overseas Agents to check.
• Pre-draft Customs permits.
• prepare AirWaybills, documents, declare permits, key submission to Airlines/Terminal.

3. Import & Export

• Need to liaise with Customers & overseas Agents, check e-mail.
• Submission Shipment detail thru website system(CCN) to Singapore Customs.
• Do billing, send email, etc.. related with operation- AIR Import / Export.

Requirements:

• Minimum Diploma / Degree in Logistics / Supply Chain Management industry or related discipline
• Else, have working experience in Air Freight Operations (Import and Export)
• Meticulous, highly organized and positive attitude
• No Experience are welcome to apply

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to [email protected]

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion!

R22103985 | EA License 16C7883