Total 8,403 Senior Executive software test engineer job vacancies in Singapore

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Carry out inspection and repair of atmospheric storage tanks, spheres etc in compliance to API 653. The incumbent should be familiar with API 650 and have capability to review tank design and repair requirements.
• Develop inspection plan and schedule for tanks in collaboration with Operations & Maintenance departments
• Conduct planned inspections for tanks using various techniques such as MFL, UTG Crawler, AUT and crack detection techniques.
• Coordinate with NDT contractors on job scope needed to support inspection work requirements.
• Investigate, analyze and determine root-cause of any failure or inherent defect in equipment/piping so as to make recommendations for alleviating the condition or solving the problem.

• Degree Or Diploma in Mechanical Engineering
• Possess API 653 certification, additional certification in API 510 and 570 would be desirable.
• Familiar with tank coatings and related inspection.
• At least 4 years' relevant experience in inspection of storage tanks and repair.
• Fresh graduates may be considered for entry-level positions and will receive relevant training to be successful in the role.

Position Overview:

The Senior/Staff Design Engineer will be responsible for developing micro-architecture for ISP and CV related algorithms, utilizing RTL design using Verilog/System Verilog coding and HLS tools like Catapult. They will analyze metrics such as power, performance, and area to meet key objectives, collaborate with architects and DV Engineersfor efficient verification signoff, and support FPGA tasks such as emulation,validation, and debugging.

Responsibilities:

• Develop micro-architecture for ISP and CV algorithms.
• Perform RTL design using Verilog/System Verilog and HLS tools (Catapult).
• Analyze and optimize metrics like power, performance, and area.
• Cooperate with verification architects and DV engineers to ensure high quality IP delivery.
• Support backend team for SoC signoff.
• Oversee FPGA tasks including emulation, validation, and debugging.

Qualification/Requirements:

• Education: Bachelor/Master’s degree or above in Electrical/Electronics/Computer Engineering is required.
• Experience: Minimum 5yearsand aboveof experience in ASIC design. Expertise in image signal processing projects is beneficial.
• Technical Skills:
• - Advanced proficiency in HDL languages (Verilog, System Verilog).
• - In-depth knowledge of all phases of ASIC frontend design and sign-off.
• - Extensive experience in image/vision/video data processing or algorithm acceleration.
• - Proficiency in scripting languages like Python, Perl, or C/C++.
• Soft Skills: Excellent leadership, teamwork, and communication skills.
• Additional Notes:Stronganalytical skills and the ability to lead complex projects independently and within teams.

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Your Career

You will work firsthand with our valued customers to address their complex post-sales concerns where analysis of situations or data requires an in-depth evaluation of many factors. You're a critical thinker in understanding the methods, techniques, and evaluation criteria for obtaining results. You'll enjoy networking with key contacts outside your own area of expertise, with a strong capability of detailing difficult technical issues to both non-technical and technical professionals.

You will regularly participate in technical discussions with multi-functional teams, creating an environment of transparency that ultimately leads to better products, better working environments, and better cybersecurity. Your quick thinking and support to our clients provides the fast assistance they need to keep their environments secure - which means you'll need to move quickly, thoughtfully, and provide technical assistance as needed (often, in high pressure situations).

Your Impact

• Provide Tier-3 Technical Support to customers and partners across JAPAC
• Provide configurations, troubleshooting and best practices to customers
• Manage support cases to ensure issues are recorded, tracked, resolved, and follow-ups are completed in a timely manner
• Provide fault isolation and root cause analysis for technical issues
• Publish Technical Support Bulletins and other technical documentation in the Knowledge Base
• Review of technical documentation for training materials, technical marketing collateral, manuals, troubleshooting guides, etc.
• Travel to customer sites in the event of a critical situation to expedite resolution as required
• Provide on-call support 24x7 on an as-needed basis

Agridence is a digital marketplace for sustainably processed natural rubber. It serves the natural rubber market with an exclusive platform for farmers, producers, consumers as well as facilitators such as financial institutions, logistics and warehousing suppliers. Through Agridence, natural rubber producers and consumers are able to track pricing, have access to market information and transact directly on the platform. Other offerings provided include value-added services such as financing, insurance and logistics.

We're looking for a Senior Softeware QA engineer to deliver our vision of a secure marketplace for natural rubber and other software products for the natural rubber supply chain. You'll enjoy this role if you like the opportunities and challenges of working in a growing business and building extensible, secure and performant systems using best practices across different devices such as web, mobile and different technologies. You will play a genuinely impactful part that makes a difference to our customers and the industry on our path towards sustainability and traceability. You'll collaborate daily with engineering, product and commercial colleagues and help to build an effective and creative working culture.

Our current tech stack includes, but it is not limited to: Python 3; Java; JavaScript; TypeScript; C#; Kotlin; Swift; Ionic; Django; .NET Framework; MSSQL; PostgreSQL.

Responsibilities:

• Review functional requirements, specifications, and documents to provide timely and meaningful feedback.
• Create detailed, comprehensive, and well-structured test plans and test cases - both manual as well as automated.
• Automate the detection of quality, functional and performance issues in APIs and frontends actively where possible.
• Design, develop and execute automation testing suites and integrate them in our CI/CD pipelines.
• Estimate, prioritize, plan and coordinate testing activities.
• Identify, record, document and verify bug fixes effectively.
• Develop and track quality assurance metrics.
• Work with business stakeholders, product owners and business analysts to understand requirements, develop and design testing suites.
• Manage and plan QA team to meet project priorities, deadlines and deliverables.
• Stay up to date with new testing frameworks and methodologies.
• Lead QA engineers towards their goals.

Requirements:

• Exposure in digital trading platforms and enterprise solutions.
• Proven work experience in software quality assurance - both automated and manual.
• Strong knowledge of one or more general purpose programming languages including but not limited to: Python, JavaScript/TypeScript, Go, C#, Java.
• Basic knowledge of SQL and scripting.
• Good knowledge of CI/CD processes including experience to use Git and/or Github.
• Good knowledge on execution of e2e testing.
• Proven knowledge on automated code testing tools such as Playwright, Cypress, Selenium, etc.
• A passion for computer programming and a deep curiosity to learn and absorb new technologies quickly.
• Good communication skills to advocate your ideas in a clear and concise manner to the team.
• Experience working in an Agile/Scrum development process
• Experience with performance and/or security testing especially in ISO27001 environment is a plus
• BS/MS degree in Computer Science, Engineering or a related certification is a plus

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Location: East

5 Days Work Week

Salary: $4,500 – $6,000 (Based on experience)

As a Senior Project Engineer, you will oversee the design, execution, and commissioning of advanced Turbo Machinery System solutions, ensuring that all projects are delivered to the highest standards in terms of quality, cost, and time. You will work closely with cross-functional teams, guide junior engineers, and manage customer relationships effectively.

Responsibilities:

• Lead the review of project scope, budget, and technical specifications.
• Develop and manage detailed schedules, project execution plans, and ensure adherence to timelines and budgets.
• Monitor and control project cost, quality, scope, and schedule to ensure timely delivery.
• Facilitate and lead design reviews, client meetings, and technical discussions.
• Oversee the development and programming of PLC-based systems using customer design documents and proprietary libraries.
• Prepare and lead Factory Acceptance Tests (FAT) and oversee customer-witnessed FATs.
• Perform commissioning of complex systems and assist end users in troubleshooting processes.
• Identify, address, and escalate any project-related risks or issues to management.
• Support the preparation of sales proposals by reviewing customer specifications.
• Collaborate with regional teams and travel across the Asia Pacific region to support project activities.

Requirements:

• Bachelor's Degree in Electrical, Mechanical, Mechatronics Engineering, or equivalent experience.
• 3+ years of experience in designing and implementing PLC-based control systems, especially in the Oil & Gas, Power Generation, or Petrochemical industries.
• Strong proficiency in MS Outlook, Project, Excel, Visio, and PLC-based IEC1131 languages.
• Proven leadership skills with the ability to manage multiple projects and lead a team.
• Positive attitude, self-initiative, and excellent problem-solving abilities.

Interested applicants, please email your resume to [email protected]

Tan Li Lian

EA 01C3135

Reg R1100465

Responsibilities:

• Engage and manage various stakeholders (internal and external) expectations and communication.
• Collaborate with functional teams to conduct cleanroom/facility planning and layout
• Carry out physical area/ floor marking, coordinate with functional teams in tool purchase, movement (in/out), tool relocation plan, project timeline and capacity update.
• Perform risk analysis of various project options and outcomes
• Maintain and validate capacity/capital/space models to enable accurate assessment of wafer fabrication and operations loading needs
• Support operational efficiency improvement efforts (cycle time, OEE improvement, capacity optimization, space optimization)

Requirements:

• Degree in Engineering (Industrial & Systems Engineering), Mechanical, or relevant field;
• Proficient in AutoCAD 2D/3D and Simulation Tool preferred
• Proficient with Microsoft Words, Excel and PowerPoint proficiency
• Preferably to have industrial engineering experience in a semiconductor/ manufacturing environment
• Ability to work independently and team player to deliver in fast paced and collaborative environment

This is a proactive business development role, where you'll initiate outreach to industry leaders, demonstrating the value that collaborative R&D projects can bring to their product development processes. Once the initial engagement is established, you will facilitate introductions between industry stakeholders and research teams, leaving the technical discussions to the domain experts. Your contribution will drive investment into local research projects, accelerating innovation and economic development.

This role is ideal for someone who thrives at the intersection of business, technology, and academia, and is passionate about using technology to drive innovation and economic progress.

Key Responsibilities:

• Engage companies to understand their business models, products, and technological needs.
• Develop an understanding of Singapore’s scientific research capabilities and how they align with industry demands.
• "Match-make" companies with research units to foster collaborations that lead to new product development, investment, and job creation.
• Promote technology commercialization by facilitating licensing deals, joint ventures, and collaborative R&D.
• Serve as a liaison between companies and research institutes to ensure smooth technology transfers.

Qualifications:

• Experience in the Electronics or Semiconductor industry, particularly in product development or commercialization.
• Excellent communication skills, able to articulate complex research and technology concepts in business terms.
• Strong analytical, problem-solving, and organizational skills.
• Demonstrated ability to manage stakeholder relationships and navigate complex, multi-sector environments.
• Self-starter with a strong ability to identify opportunities and solve problems.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Process Engineer to assist their team for the next phase of their business. They are located in West.

Duties of Senior Process Engineer:

• Provide technical support for routine and non-routine production activities.
• Develop best practices to improve production safety, reliability, and efficiency.
• Evaluate current production activities and implement continuous process improvements.
• Troubleshoot process and equipment problems to enhance operational reliability and efficiency.
• Measure plant performance, including power consumption index and process availability.
• Undertake energy efficiency and optimization projects as required.
• Manage alarm systems and ensure robust operations.
• Lead Management of Change projects for terminal modifications.
• Participate in safety evaluations, inspections, and emergency response efforts as needed.

Requirements:

• Minimum Bachelors Degree in Chemical Engineering or any relevant field.
• Minimum 3 to 5 years experience in Oil and Gas Industry or any relevant industry.
• Prior experience in handling process safety in plant design is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry. They are looking for a Senior Mechanical Engineer for the next phase of their business. They are located in West.

Duties:

• Responsible in guiding the maintenance, troubleshooting, repair, commissioning and substitute of mechanical or piping equipment within the Gas Engine Generators as well as its additional systems such as gas engine, pipeline, pressure pipe, ACMVs, lube oil and coolant pumps arrangement.
• Responsible in supporting mechanical support and solutions for the process & care and providing the development of care strategy including procedure/specification focusing on equipment dependability, spares inventory necessity, shutdown and inspection lists, preventive and prophetic care programmed.
• Responsible in managing and work meticulously with internal contractor and equipment seller to perform maintenance work at the Gas Engine Generators Building and terminal.
• Responsible to make certain compliance to appropriate regulations, manipulate safely, fit for object, maintainable and trustworthy for the site’s modified or anew build mechanical setup (such as gas engine, pumps, gravity vessel, safety facilities, etc).
• Responsible in guiding technical negotiations, execute and succeed project schedules or cost as well as collaboration with outward and internal shareholders, merchants for end of life and development project using company Management of Change process for machinery facilities.
• Responsible in supplying technical practicing as required in the area of process, maintenance, fault resolution of the Gas Engine Generators.
• Responsible in contacting with exterior investor including administration agencies on approbation and risk of closure of electrical arrangement that will influence gas-send out.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 3 to 5 years’ experience in relevant industry for maintenance of rotary and staticequipment is needed
• Prior experience in different types of gas/diesel machine knowledges is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Key Responsibilities

The incumbent will

• Provide project support or daily operation support to MNC clients in the area of automation.
• Perform system administration activities, such as user access management
• Execute routine system preventive maintenance work orders
• Provide project support and review system functionalities/specifications for new equipment addition
• Support troubleshooting and investigation of production process, equipment, systems and code/configuration related to quality or safety issues.

Requirements

• Diploma/Degree in a Engineering field or Computing field
• Minimum 8 years of working experience in Siemens PLC, WinCC
• Minimum 5 years working experience in a GMP environment
• Good teamwork and communication skills; ability to interact across functional teams at multiple levels within the organization
• Excellent problem-solving ability and customer-focused

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Responsibilities:

• Assists in preparing Work Plan and manpower requirements based on the Work scope / Specification
• Delegates job to supervisors and plan manpower required for jobs in accordance to the budgeted man-hours
• Coordinates between the different trades and resolves problems encountered in project
• Reads and interpret Piping ISOMETRIC Drawing /P&ID Drawings
• Prepares Material Take-Off (MTO) based on Piping ISOMETRIC Drawing /P&ID Drawings
• Utilizes different pipe welding materials
• Raises and approve Purchase Request for materials and equipment required for the jobs accordingly
• Monitors work of sub-contractors to ensure that quality and workmanship conform to company standards
• Ensures all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements

Requirements:

• Bachelor’s degree in Engineering/ Marine Engineering or related engineering disciplines
• Minimum 2 years of relevant working experience in piping discipline
• Able to multi-task and able to work in a fast-paced environment
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Occasional short-term overseas visit or inspections as per project requirements
• Good in planning, analyzing, communicating and independent work
• Excellent proficiency in English (written and spoken)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Why Join Us?

• Attractive Newcomer Bonus
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, etc...)
• Executive Health Screening

Job Responsibilities:

• Develop, maintain and manage working relationships with clients and all related parties.
• Manage and implement overall project.
• Coordinate with Project Manager on project matters
• Supervise and provide advice to junior Project Engineer(s)
• Check working drawing, identify discrepancies for resolution
• Keeping track on variation and claims of contract
• Perform project cost review on a regular basis and on identified areas.
• Plan and manage project schedule to ensure timely delivery.
• Perform incoming inspection on project materials delivered on site by suppliers or vendors.
• Site coordination with subcontractors, supervisors and clients.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
• Has relevant experience in infrastructure projects, e.g. roads and rail projects
• Possess skills, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills
• Class 3 driving license will be added advantage.

We are looking for an Executive Engineer to join our team in Singapore office. You will have opportunity to work on interesting projects across wide-ranging sectors and typologies.

Your responsibilities include:

• Conceptualise engineering design and execute the project with the detailed designs.
• Oversee project management including overall responsibility over resources, time allocation, cost, and quality of project deliverables.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, resolve issues, submission to authorities and overall on-site construction supervision.
• Develop good working relationships with clients and partners in the industry.

What you will need:

• A recognised degree in Civil Engineering from a university recognised by the Professional Engineers Board of Singapore.
• At least 3-5 years of experience in design and project management of HDB public housing projects.
• Strong technical proficiency in engineering analysis and design programmed. Knowledge in BIM will be an advantage.
• Conversant with local authorities’ requirements and submission procedures.
• A good track record of being a project / technical lead for significant / key projects.
• Strong oral and written communication skills, stakeholder management skills.

EXPERIENCE AND SKILLS REQUIREMENTS

• Min Diploma in IT/ Computer Science with Strong technical knowledge of hardware, software, and network systems.
• Good working knowledge of SQL and ERP systems
• Good verbal and written communication skills
• Good communication and written skills to effectively describe and demonstrate technical solutions to internal and external parties
• Relevant experience in handling IT infrastructure
• Proven experience in troubleshooting complex technical issues.
• Excellent leadership and mentorship abilities.
• Strong problem-solving and analytical skills.
• Proficiency in IT support tools and technologies.
• Effective communication and interpersonal skills.
• Ability to manage multiple tasks and work under pressure.

KEY RESPONSIBILITIES

• Handle escalated support requests with a focus on resolving issues promptly and maintaining positive relationships with end-users.
• Ensure high levels of end user satisfaction by delivering timely, professional, and effective support
• Manage Microsoft 365 services, including Exchange Online, SharePoint and Teams.
• Oversee the development, maintenance and support of ERP system.
• Manage backup strategies for both on-premises and cloud environments.
• Evaluate, negotiate and manage relationships with technology vendors
• Provide high-level technical support for complex issues related to hardware, software, and network systems.
• Perform in-depth analysis and diagnostics to address persistent or challenging technical problems.
• Act as a point of escalation for complex or high-priority support issues.
• Mentor and guide IT staff, providing support and training on advanced technical issues.
• Manage and resolve critical incidents, ensuring timely and effective communication with affected stakeholders.
• Conduct root cause analysis for recurring issues and develop long-term solutions to prevent reoccurrence.
• Participate in IT projects and initiatives, providing technical expertise and support for system upgrades, installations, and deployments.
• Collaborate with other IT teams and departments to ensure project alignment and successful implementation.
• Ensure adherence to organizational policies, IT standards, and regulatory requirements.
• Implement and enforce IT security measures to protect organizational data and systems.
• Implement and manage backup solutions to protect critical data.

ADDITIONAL JOB INFORMATION

• Japanese Wellness MNC
• 10 mins walk shelter all the way from Circle Line Labrador Park MRT Station
• 5 days work week from 9am - 6pm
• Salary Ranges from $5,000 - $6,000 with bonus and staff benefits
• Kindly send us your resume, we regret that only short-listed candidates will be contacted shortly.

EA License | 14C7092

EA Registration Number | R1110882 (Lee Ming Er)

Project Engineer / Senior Project Engineer

• Construction Industry
• Basic $3,500 - $7,000
• PB
• 5 days, 8am - 5pm
• Location: Changi Airport, East Region

Job Responsibilities:

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc
• To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit

Job Requirements:

• Degree in Civil Engineering (Recognised by Singapore Professional Engineers Board (PEB)
• At least 3 to 5 years of working experience in the Construction Industry and Infrastructure

How to apply:

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only shortlisted candidates will be notified.

Kok Jean Ray
Registration Number: R22110935
EA Licence No: 16C8004 (Elitez Pte Ltd)

• Operations and facility management of Systems / Infrastructure according to established procedures and service levels
• Manage systems changes through established change request process and provide status reports to the relevant parties.
• Respond promptly to incident, investigate and provide temporary and/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.
• Conduct root cause analysis and implement proactive measures. Monitor effectiveness of implemented measures
• Monitor and measure the performance and availability of systems proactively; implement corrective actions identified to improve performance & availability.
• Monitor the agreed service level (e.g. service request, system availability), document & maintain the configuration of the systems; provide regular reporting to relevant parties
• Plan and implement service continuity measures, i.e., backup/restore procedures and disaster recovery plan, to ensure continuous operation of the business.
• Provide systems related technical advice to customers or project team.
• Provide on-job-training and guidance for junior engineers

To Apply:

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret that only shortlisted applicants would be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy which is available at https://www.persolkelly.com.sg/policies. You also acknowledge that you have read, understood, and agree to the said Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg No : R22110511 | Teh Chee Hoong

Senior R&D Engineer / Senior Material Development Engineer (Material science/ metal scraps / characterization/ Sustainable)

Company highlights

• One of the largest OEM in the world, cooperate with world-class clients

• Good Employee benefits: AWS + PB

• Chance to travel to APAC countries and work with cross-functional team (15%)

Summary of job scope:

• Led the creation of new methods to recycle and reuse metal scraps.

• Researched ways to upcycle titanium and aluminum alloy scraps (product: Metal enclosure).

• Studied how to recycle 3D-printed metal powders to lower material costs.

Requirement:

• Masters/PhD in Metallurgy/ Metal material engineering/ Materials science

• 2-3 years of relevant R&D industry experience. Experience in Metal powder production process

• Comfortable liaising with factories in China for mass production.

Skills and Abilities:

• Good analytical and problem-solving skills.

• Excellent communication and interpersonal skills.

• Ability to work independently and as part of a team.

• Proficient in Microsoft Office Suite.

• Attention to detail and accuracy.

If you are interested in this opportunity, submit your application now to [email protected] find out more about this position.

Chen Hsiu Wen (Winnie) | Personal Reg No: R1980765

Manpower Staffing Services (S) Pte Ltd | EA License No: 02C3423

Production Engineer / Executive | Up to $4k | 5 Days | Jurong

Location: Tanjong Penjuru
Working hours: Mon to Fri from 7:30am to 5pm
Salary: $3,500 - $4,000

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant