Total 57,478 supply chain engineer job vacancies in Singapore

Role:Network Engineer

JD:

Responsibilities:

Design and Document Preparation
• Provide networking expertise, revise solution architecture drawings and diagrams
• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.
• Prepare ITD (Test procedure) document for OPS Network and SMRC Network
• Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)
Integration Support:
• The Contractor with support configuration changes to system platforms in factory and customer sites.
• The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)
• The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)
• The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)
• The Contractor will assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)
• The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)
• The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)
• The Contractor will support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline
• The Contractor to provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:
• The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls
• The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).
• The Contractor will troubleshoot / fix if there are any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)
• The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

About your role

• Lead the design and development of cutting-edge 3D machine vision systems tailored for industrial robotic use cases, ensuring high precision and performance.
• Collaborate closely with cross-functional teams, including robotics engineers and software developers, to integrate 3D machine vision technology seamlessly into robotic applications.
• Oversee the integration of 3D sensors with robotic systems, optimizing their performance and accuracy.
• Develop and refine algorithms for data acquisition, image processing, and object recognition to enable advanced visual perception capabilities for robotic systems.
• Troubleshoot and debug technical challenges related to machine vision technology, ensuring robust and reliable operation within industrial environments.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Significant experience in the design and development of 3D machine vision systems, particularly in industrial or robotic applications.
• Proficiency in programming languages such as Python, C++, and experience with relevant libraries and frameworks.
• Strong knowledge of 3D sensors, as well as processing and manipulation of point cloud and mesh.
• Problem-solving skills and the ability to work collaboratively in a multidisciplinary team environment.
• Excellent communication skills to effectively convey technical concepts and insights to both technical and non-technical stakeholders.

Responsibilities

• Assist project manager to manage projects from initiation through completion, ensuring timely delivery within budget
• Coordinate with internal team and external stakeholders to ensure seamless project execution
• Oversee the design, implementation, and integration of control systems, SCADA systems, and Programmable Logic Controllers (PLCs) to meet client requirements
• Prepare and review project documentation, including project plans, specifications, technical drawings, and operation manuals
• Conduct site surveys, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and commissioning activities at client sites
• Troubleshoot and resolve issues related to system performance, hardware and software integration
• Ensure adherence to safety, quality, and regulatory standards in all projects activities
• Provide technical support and training to clients and end-users during the implementation and handover phases
• Liaise with suppliers and subcontractors to ensure delivery of materials and services on time
• Assist in preparing technical proposals and cost estimates for new projects

Requirements

• Diploma or Degree in Electrical Engineering, Control Systems Engineering or related fields
• 2-5 years of experience in project management, automation, and control systems, preferably in industries such as water treatment, oil & gas, manufacturing, or infrastructure
• Strong knowledge of SCADA, DCS PLC programming
• Familiar with communication protocols like Modbus, DNP3, and OPC
• Hands-on experience with field commissioning, testing, and troubleshooting
• Strong project management skills, including plannings, scheduling, budgeting and resource management
• Excellent communication and interpersonal skills to manage client relationship and work in a team-oriented environment
• Professional Certificate holders in PMP or Certified Automation Professional is a plus

Job Scope

- 40% Provide Technical and Desktop support for end-user environment.

- 60% assist Senior Engineer to Plan; design the Technology schematic and

create bill of materials.

- Pro-actively provide recommendation to Senior staff of any customers’ requirement for

technology improvement,

- Timely report to Senior the progress of all assigned projects.

- Take responsibility for the assigned project and shall have full accountability and visibility of

the entire installation process, field deployment and implementation till Project.

completion.

- Promptly update Project schedule and cost sheet.

Skills Preferred:

Technically competent in Windows operating systems, Endpoint Security, basic networking configuration.

Knowledge of Helpdesk systems.

Good communication skills.

Comfortable in managing end-users and explaining situations that may arise.

Able to perform simple planning of delivery and customer liason.

NETWORK ENGINEER

Mandatory Skills Cisco Router

Preferred Skills Cisco Catalyst Switch, Alcatel-Lucent FortiNet Series, Palo Alto Networks Firewall, Fortinet

Job Title: Network Security Engineer

Job Overview:

We are in search of a highly skilled AI-OPS / Network Security Engineer to manage and enhance our network infrastructure's security. The successful candidate will be responsible for the design, implementation, and maintenance of network security solutions, ensuring the stability, reliability, and security of our network environment.

Key Responsibilities:

1. Experience in AIOPs solutions for network monitoring, analytic and automation
2. Maintaining AI-Driven tools with existing network infrastructure for predictive analytics, anomaly detection, and root cause analysis
3. Basic knowledge in automating network tasks and workflows using AIOPs tools and low to no code programming
4. Analyze network data to identify trends, optimize performance, and improve security
5. Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
6. Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
7. Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
8. Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
9. Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Qualifications:

- Bachelor’s degree in Computer Science, Information Technology, or related field.

- 3+ years of experience in network security engineering.

- Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).

- Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.

- Hands-on experience with Alcatel Lucent Wireless Controllers.

- Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.

- Proficient in ClearPass Policy Manager for network access control and policy enforcement.

- Knowledge of network protocols, security architectures, and best practices.

- Strong analytical and problem-solving skills with attention to detail.

- Excellent communication and teamwork abilities.

Additional Preferred Skills:

Though not mandatory, the ideal candidate will also have exposure to the following technologies:

- Experience with other firewall solutions beyond Palo Alto and Fortinet, such as Check Point or Cisco ASA.

- Proficiency in network encryption protocols and VPN technologies.

- Understanding of network segmentation and micro-segmentation principles.

- Knowledge of intrusion detection/prevention systems (IDS/IPS).

- This role demands a proactive individual with a strong technical background in network security. If you possess these skills and are looking for a challenging opportunity in network security engineering, we encourage you to apply and become a valuable part of our dedicated team.

Job Description

> Performing electrical engineering work in analysis, design, development, running simulations, prototyping hardware, evaluation, planning, testing and operations;

> working with the end customer and/or systems engineers to gather requirements and convert them to engineering specifications;

> trouble shooting and repair the system hardware and software during real-time collection operations.

> On site electrical research, construction audits, field reviews

> Writing detailed and concise technical reports, feasibility studies, proposals, including written responses and instructions as required during all project phases

> Conducting all tasks in cooperation with internal clients and other engineering disciplines

> Managing and enhancing client relationships

> Maintain proper project documentation of the electrical work performed Job

> Other assigned tasks as requested

Job Requirements

> Minimum Diploma/ Degree in Electrical Engineering/Electronics/Automation Control or equivalent

> Responsible and committed.

> Good problem solving and troubleshooting knowledge using systematic approach

> Knowledge of AutoCAD software or electrical equivalent will be an advantage

> Ability to design electrical circuit and perform electrical calculations

> Knowledge and experience on wiring will be an advantage

>Self-motivated, highly resourceful and organized

Job Responsibilities:

• Reporting to Senior Tunnel Manager
• Support the tunnelling operation from geological viewpoint.
• Provide geological supervision to the tunnelling operation.
• Provide planning of additional Soil Investigation related to tunnelling works.
• Conduct face mapping to understand the ground condition for tunnelling.
• Ensure the work is done in compliant with the protocol established for the project.

Job Requirements:

• Bachelor’s Degree/ Diploma in Civil Engineering or related field.
• Experience in tunneling is mandatory.
• Experience in Rail & LTA projects is mandatory.

Job Description

• Develop and submit method statements for EMS and related activities prior to tunneling.
• Monitor the EMS full-time during tunneling operations.
• Establish and implement primary and secondary muck reconciliation methods, such as muck pit measurement and belt weigher measurements, Fines calculation
• Prepare shift reports for EMS, including results of primary and secondary muck reconciliation for each ring built.
• Investigate breaches of upper and lower muck limits and document findings in shift reports.
• Monitor trend graphs of deviation flow, total volume, dry volume, dry mass etc.
• Coordinate with Tunnel Engineers, TBM operators, and STP operators to ensure smooth operation.
• Conduct regular inspections and calibrations of EMS equipment to ensure proper functioning and adherence to safety and quality standards.
• Analyze data trends and provide recommendations for optimizing tunneling efficiency and minimizing downtime.

Job Responsibilities

• Minimum 5 years of experience in tunneling works
• Diploma or bachelor's degree in Civil Engineering or related field.
• Good communication, proficient in both written and spoken English.

The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

1. Assist M&E/ Design Consultants in reviewing the design intend and identify system discrepancies or improve system performance if necessary.
2. Carry out value engineering to the system whenever necessary without compromising the system performance and compliance to the local authorities’ requirements / Local Code of Practices.
3. Perform Equipment selection in accordance to the engineering calculation done and approved by M&E Consultants.
4. Perform sizing and selection of the Electrical system material in accordance to the engineering calculation done and approved by M&E Consultants.
5. Liaise with the equipment suppliers and material suppliers to ensure selection of the equipment are relevant and compliance to the technical specification/requirements.
6. Prepare technical submission to M&E Consultants for approval and follow up on the comment (if any) related to the submission.
7. Work closely with the associate team members to see that overall Electrical system design development are meeting the design intend of M&E Consultants.
8. Take charge in the overall planning and execution of Electrical system Testing & Commissioning.

About the Role:

We are seeking a motivated and detail-oriented Junior Test Engineer to join our team. In this role, you will be responsible for ensuring the quality and reliability of our operations system through testing and continuous improvement. If you are passionate about quality assurance, have an eye for detail, and are eager to grow in the field of software testing, we would love to hear from you!

Objectives of this Role:

1. Ensure the highest quality of our operations system by developing and executing tests to detect and report any errors in the product.

2. Develop suitable testing plans and frameworks that align with our customers' needs.

3. Coordinate with various functions and teams to incorporate necessary product changes.

Responsibilities:

1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.

2. Able to leveraging on inhouse GenAI for test case creation and enrichment

3. Ensure test runs and results are completed within the given time frame.

4. Develop and execute test plans to validate software functionality against requirements and specifications.

5. Identify, report, and track software defects and issues.

6. Perform functional, performance, security, and regression testing of software products.

7. Report test results and defects to the development team and other stakeholders, and work on their resolution.

8. Provide suggestions and feedback to improve the quality of the software development process across teams.

9. Stay updated with the latest testing tools, techniques, and methodologies.

10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Required Skills and Qualifications:

1. Degree or diploma in computer science, engineering, or similar technical certifications.

2. At least 1-3 years of experience in testing, quality assurance, or similar roles in the banking industry is non nego

3. Excellent problem-solving skills, an analytical mindset, and strong communication skills.

Preferred Skills and Qualifications:

1. Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.

2. Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester).

Internal ref: 9278

Regards,

Lini

Recruitment Consultant

R22108463

Responsibilities:
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.
2. Able to leveraging on inhouse GenAI for test case creation and enrichment
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

RESPONSIBILITIES:

· Site works, inspection, planning, technical support to Project Manager and other site activities.

· Able to coordinate well with Sub-contractors, suppliers and consultants.

· Responsible for all inspection activities being carried out.

· Supervising team and ensuring safety and compliance of work on site.

· Liaise with authorities on technical matters.

REQUIREMENTS:

· Educational qualification in Structural, Civil Engineering or its equivalent.

· At least 3 years working experience in condominium projects

· Good organizational and communication skills

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

1.Attend vessel performs inspections,calibration, testing and troubleshooting on electrical & automation systems

2. Service/overhauling automation/electrical equipments in workshop

3.Good communication with shipcrew and superintendent

4.Good communication with shipyard

5.Prepare reports after finished the service job

A. Main Responsibilities

1 Responsible for all on-site technical and engineering matters.

2 Ensure works carried out meet company’s quality standards & contractual requirements.

3 Involved in project planning, monitoring project progress and schedule.

Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification.

4 To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

Include attending all progress meeting.

5 Assisting Project Manager in monthly progress claims and monthly progress reports.

6 Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements. 7 Ensuring Environmental, Safety and Health practices are carried out at all times.

8 Other ad-hoc duties assigned from time to time

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1.Knowledge of Electrical & Mechanical

2.Few years of hands on experience on repair and servicing of machineries.

3. To assist for new machine installation, maintenance, troubleshoot and repair.

4.Able to work and communicate well with customers and colleagues.

5.Good working attitude

6. Travelling required and able to travel within short notice

Responsibilities:-

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Some responsibilities of a project engineer include:

• Planning, scheduling, predicting, and managing technical tasks
• Solving complex problems, such as transportation planning and grid interconnection
• Making decisions
• Providing leadership
• Using math skills
• Managing projects
• Communicating effectively

Project engineers are concerned with the engineering aspects of a project, while project managers are concerned with the business aspects.

Duties & Responsibilities:

• Study drawings for the projects and understanding requirements
• Determine operation requirements and preparing schedule
• Liaise with internal/external parties for the execution of works
• Ensure timely delivery of projects according to schedule
• Updating of project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently
• Undertake ad-hoc duties related to project execution
• Any other ad-hoc duties assigned

Requirements:

• Diploma/ Degree in Civil Engineering or any equivalent
• Min. 2 years of experience
• Able to work independently and as a team
• Good communication and interpersonal skills

12 months renewable contract through Encora

Design, implement, and manage storage systems for organizations. They ensure data is stored efficiently, securely, and reliably.

Key Responsibilities

1. Design and implementation: Plan and deploy storage systems, including SAN, NAS, and object storage.

2. Storage management: Monitor, maintain, and optimize storage systems for performance, capacity, and availability.

3. Data protection: Implement data backup, replication, and disaster recovery solutions.

4. Troubleshooting: Identify and resolve storage-related issues.

5. Capacity planning: Forecast storage needs and plan for upgrades and expansions.

Nice-to-Have Skills

1. Certifications: Storage-related certifications, such as EMC, NetApp, or VMware.

2. Cloud certifications: Cloud computing certifications, such as AWS, Azure, or Google Cloud.

3. Virtualization: Knowledge of virtualization technologies, such as VMware or Hyper-V.

4. Networking: Understanding of networking fundamentals, including TCP/IP, DNS, and DHCP.

Education and Experience

1. Bachelor's degree: In Computer Science, Information Technology, or a related field.

2. Experience: 2-5 years of experience in storage engineering, system administration, or a related field.