Total 60,959 Full-time systems engineer job vacancies in Singapore

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

COMPANY DESCRIPTION

About the Company

JERA Global Markets (JERAGM) is a leading utility-backed seaborne energy trader specialising in LNG, coal and freight. A joint venture between majority shareholder JERA Co., Inc. and EDF Trading, JERAGM's shareholders are among the world's major utilities.

JERAGM operates one of the largest energy portfolios in the world which gives it an in-depth understanding of the way local, regional and international energy markets behave. Its in-depth knowledge and market insights enable us to capture trading opportunities, optimise portfolios, create value and enhance security of supply for our customers.

Headquartered in Singapore, JERAGM has a global talent pool of close to 300 people across offices located in four strategic locations: Singapore, Japan (Tokyo), the UK (London) and the US (Houston).

JERAGM is strongly capitalised with over US$500 million in paid up capital and a total equity of US$4 billion. JERAGM has retained its A+ Stable rating from R&I, attributable to a robust business model and solid financial base.

RESPONSIBILITIES

JERA GM is implementing a series of new IT systems to reduce its reliance on its shareholders for IT services and to enable the rapid growth into a global leader in the trading of fossil fuels.

At the core of the system landscape is a set of vendor systems that support critical business activities such as trading, risk management, pricing, and logistics. JERA GM have and will continue to make significant investments building on top of these systems to tailor them to the specific needs of its business. Up until now, this work has been performed by teams of consultants. JERA GM would like to develop an in-house capability, so they can be self-sufficient in the ongoing development on this platform.

This in-house capability needs to be able to extend, customise, configure and integrate these systems to meet the ongoing needs of the business. They will also support the development of new bespoke systems, such as for business intelligence and decision support, to meet needs not provided by the vendor systems.

The Core Platform Software Engineer will:

• Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

• Develop new features on the company's credit system (Cubelogic) and ETRM (Energy Trading and Risk Management) system to support the company's growth (new products, new processes), in a Python/Azure (Databricks & ADF)/C# / SqlServer environment.

• Demonstrate a broad set of technical skills including expert database development and administration, Python/.NET/C# development and Powershell Automation/Devops skills.

• Build new features on the various applications that revolve around the Cubelogic/ETRM (APIs, loaders, reports, BI). It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. They will be actively required to work with challenges using technologies such as Azure IaaS/PaaS, Python, Databricks, Power BI.

• Apply their strong software engineering skills to:
  • Improve the ability to integrate vendor systems together.
  • Improve the ability to unit test customisations of vendor systems.
  • Improve the structure the source of such customisations.

• Work with JERA GM IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

• Support efforts to improve end-to-end test automation and continuous integration across the application estate.

• Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

• Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

• Work collaboratively with the rest of the JERA GM technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

• Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

• Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

• Provide 3rd line production support.

Skills and Experience required

• 5-10 years of overall experience with advanced level of coding experience in either Python or C# with good knowledge of other.
• Strong experience in SQL, & PowerShell
• Modern cloud-based system architectures and technologies such as Data Lakehouse using Databricks, Azure functions and ADF
• Experience with C# .NET
  • Good understanding of the core language and framework
  • Service oriented development (WCF, Rest API, GraphQL)
  • Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Familiar with knowledge of Azure services including VNET, Key-Vaults, Azure Data Factory, ADLS Gen2, Virtual Machines, App Services, Storage Accounts and Azure Active Directory
• Orchestrating data pipelines using Azure Data factory
• Strong conceptual understanding of Big Data, Map-Reduce, Spark, file formats such as Parquet, Avro, ORC etc.
• Reporting tools such as Power BI
• Knowledge of JavaScript/UI framework like Angular/React.
• Cloud experience in Azure or AWS
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Experience in Allegro ETRMs is desirable.
• Experience in Cubelogic is desirable.
• Proven work experience in the energy trading, commodities trading or corporate banking sector

• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by JERA GM as required.

• Highly motivated to deliver results and ‘go the extra mile' to meet deadlines.

• Able to multi-task with minimal supervision and highly structured and organised in the way tasks are approached.

• Excellent communication skills.

• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.

AI based maintenace & Reliability Optimization Engineer:

Develop engineering solutions to overcome repetitive failures and other problems that adversely affect plant operations.

Manage and supervise a team of Calibration/E&I Technicians to perform instrument calibration and instrument maintenance activities

• Support maintenance operations and shutdown activities by working with Supervisor and Engineer on developing the annual PM plan, setting work priorities; scheduling PM activities, coordinating and resources planning to meet the schedule in cost-effective way.

Drive Sustainability: Lead initiatives for waste reduction, carbon emissions, and water conservation; assess and adopt renewable energy solutions for the manufacturing plants in semi conductor and petrochemical sectors

Continuous Improvement: Apply data-driven approaches to improve asset reliability and sustainability, integrating best practices across the manufacturing plant.

AI-driven predictive maintenance improves operational efficiency by optimizing maintenance schedules and resource allocation. Analyzing real-time data and predictive analytics allows AI algorithms to prioritize tasks and allocate resources more effectively.

Requirements

• Bachelor’s in reliablity engineering or related field

• ⁠Ability to garner technical insights from large engineering data sets using analytical tools and concepts; making competitive

• Minimum 3 years in reliability engineering, energy management, or sustainability within manufacturing

Provide 1 st and 2nd level support  Technical assistance and support for incoming IT Helpdesk and End User desktop queries and problems.  Laptop/desktop/peripherals hardware and software technical support.  Windows 7/10, Windows server, file/print/scan services, Outlook/Office 2016, Office365 suite, 2FA, LAN\WAN/Wireless network connectivity, VPN, mobile devices, meeting room audio/video conferencing systems, PABX and basic application troubleshooting.  Perform PC/Laptop Refresh, Onboarding and off boarding of users and ensure asset inventory tracking is updated.  Escalate issues to OEM/vendors and follow-up until the resolution of the problem.  Out-Of-Office-Hours On-Call support. 2. Systems administration and maintenance  Provide Wintel server, Active Directory, GPO, WSUS, Software deployment and system administration.  Liaise with external vendors for any related hardware/software maintenance and services.  Perform Installation/Configuration/Monitoring/Patching/Upgrades of desktops, servers, operating systems, antivirus, databases and other system related software.  Participate in disaster recovery testing. 3. IT governance & documentation  Involve in regular review and update of infrastructure policies, procedures and system documentation to ensure compliance.  Plan and conduct end-users training as needed.  Conduct quarterly IT asset counts.

At least 2 years of working experience in IT helpdesk providing 1st level and 2nd level end user desktop support. 2. Strong experience in End user hardware and software technical support, Windows 7/10, Office 365 administration and Active Directory. 3. Good to have networking, storage and some database administration experience. 4. Able to work on a rotating 2nd level Out-Of-Office-Hours support On-Call basis. 5. Knowledge of ITIL operation. 6. Strong analytical skills, ability to work independently and in a team environment. 7. Possesses good attitude, good interpersonal and communication skills. EDUCATION 1. Degree/Diploma in Electronic/Computer Engineering or Computer Studies or equivalent. 2. Good to have ITIL foundation certification. 3. Good to have Microsoft 365 or MCSA certification

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Provide support in system management and Ops & Support activities required to maintain the systems’ Service Level Agreement (SLA) such as:

• Security Monitoring/Tracking. Software and Vulnerability Patching
• Review and Implementation of Change Requests
• Support Procurement Activities. Audit.
• Monthly review of accounts and server log activities
• Submission of security clearance for vendors
• Technology Refresh and Migrations. Provide after office hours support for deployments
• Responsible to lead collaboration within internal application stakeholders, vendors and 3rd party managed services
• In-Charge to set clear priorities and alignment of operation and maintenance with the client's contractual obligations

Requirements

• Experience in managing and supporting system management and Operations and Support
• Maintain the systems’ Service Level Agreement (SLA)
• Experience collaborating with vendors and stakeholders’ management
• Has experience understanding contractual obligations (e.g. clients)
• Strong problem-solving skills with the ability to engage all stakeholders up to Director Level
• Strong leadership with excellent interpersonal and communication skills

Interested applicants may send in their detailed resumes in MS Word format, with subject title: 105 – Junior PM

(Reg Nos. R1104128)

EA No: 92C5311

IT Consultancy & Services Pte Ltd

Please visit www.itcspl.com to learn more information about ITC

Degree / Diplom in Science, Electrical / Instrumentation / Process Control System

Prepare the ITP, QA / QC Check List, Quality plan and submit the documents to Client as per Pharma / Wafer Plant requirement

Monitor the Quality and provide the training for workers if quality lack before Client Inspection

Project Management and Quality Inspection with Client, Main contractor and Sub Contractor

Quality trainning including practical to the own team and Sub contractors.

Coordinate with Consultants, Clients, Sub Main contractor Manager / Engineer for update the site installation, Red Marking Drawings for approval, BOQ for Construction Works Execute

Must Experience in the usage of Bim MEP (Revit / Navis / NWD Software and 3D ) model to submit the drawing to clients

Prepare the materials BOQ to procurement team

Observation of the Safety violation and Correcting the unsafe works

Prepare the RA, SWP and MOS as per client required

Business Engineering is looking for impact-focused, entrepreneurial engineers ready to bring their ideas and make a difference. We are technology experts that apply our software engineering skills to bring a unique blend of business and technology expertise to ensure our partners succeed. Our team is at the intersection of business and innovation where you will execute on solving real-world business challenges through Meta's platforms and community in many of today’s most exciting industries and products. These include Video, Commerce, Monetization, Metaverse, Gaming, Creators, AI, Messaging and more.

You will write scalable production-grade code across Meta's platforms in collaboration with other product engineering teams. You will get to learn and build on different tech stacks and languages. You will use your entrepreneurial passion and the freedom that the role provides to create your own opportunities and choose how you make an impact.

The work we do exceeds the boundaries of what is possible quickly, and at scale. Our work transcends technology and ensures the solutions we build translates into prosperity for all. Our code is designed to engineer and accelerate business growth. Growth is great. Rapid growth is better. Our approach aims to maximize positive impact for our partners as well as the billions of people that use their products and services.

Responsibilities

• Build new products and improve existing ones in collaboration with Meta product engineering teams and cross functional partners to meet business needs
• Understand and apply deep knowledge of products, technologies, and business to build solutions to solve for problems at scale
• Design and build end-to-end systems and launch-plan strategies
• Use broad range of technical and soft skills to build productive relationships with our partners, and independently resolve complex technical and business needs
• Use expertise and product insight to deliver high-quality project/integration/partner engagements, while influencing product roadmap to meet the business needs
• Guide workflow changes, and gain consensus from stakeholders while driving toward solutions
• Respond and maintain effective communication with industry partners and internal stakeholders
• Work with partners to develop a long- term strategic plan, grounded on business objectives, and manage partners during integrations with Meta’s platform products and ensure value creation
• Build and manage strong working relationships with technical counterparts. Mentor and share knowledge with peers, creating positive atmosphere amongst team
• Conduct code reviews and provide constructive feedback while quickly actioning feedback from code reviews conducted of your code
• Influence decision-making through presentation of data-centric business topics
• Serve as a subject matter expert within Business Engineering and provide consultation on domain-level projects
• Participate in interviewing and onboarding of new team members
• Willingness to travel 25% of the time, may vary per team/function

Minimum Qualifications

• Currently has, or is in the process of obtaining a Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. Degree must be completed prior to joining Meta.
• Experience with open source languages such as PHP, Python, Java, or JavaScript Frameworks
• Experience with writing and shipping reliable, scalable, and efficient code, with an emphasis on long-term maintainability, in partnership with all appropriate reviewers, in manageable pieces with relevant documentation and test plans
• Experience communicating technical concepts to non-technical audiences
• Experience with software design and architecture

Preferred Qualifications

• Experience working on multi-person code bases including open source or personal projects
• Client/partner-facing and/or experience communicating to an audience
• Experience contributing to open source projects, shared code repositories, and/or personal projects
• Experience working in highly collaborative environments
• Experience contributing to developer and platform documentation
• Experience with open source contributions (especially as part of larger projects)

Meta builds technologies that help people connect, find communities, and grow businesses. When Facebook launched in 2004, it changed the way people connect. Apps like Messenger, Instagram and WhatsApp further empowered billions around the world. Now, Meta is moving beyond 2D screens toward immersive experiences like augmented and virtual reality to help build the next evolution in social technology. People who choose to build their careers by building with us at Meta help shape a future that will take us beyond what digital connection makes possible today—beyond the constraints of screens, the limits of distance, and even the rules of physics.

Working in the engineering team, the senior network engineer have extensive knowledge and experience in installation, termination of network equipment (Copper & Fiber Outlet, patch panel and cable management). He/ She will possess hands-on experience in testing & programming of network switch, router, WLAN controller, AP and firewall. He/ she have relevant system architect in data center infrastructure design and implementation including server (VMware), SAN storage and network.

Responsibilities

1. Take ownership of system design & implementation to make a truly access and complete of client requirements until full closure of the project delivery.

2. Conduct factory acceptance test in the workshop, providing FAT report.

3. Deliver customer training, presentation and support.

Key Deliverables

1. Functional Design

2. Infrastructure Block Diagram

3. System Termination Diagram

4. Network, Server & Storage Configuration profile

5. Infrastructure Security policy profile

6. FAT procedure & report

7. SAT procedure & report

Job Specifications

1. Minimum Bachelor in computer science, network or equivalent technical discipline.

2. Proven 5 years’ experience in a similar role & responsibility

3. Well organized documentation, objective driven, time-sensitive and resourceful.

4. CISCO certified (CCNP preferred)

5. NetApp / EMC certified (NetApp NCDA preferred)

6. VMWare certified (VCIX6-DCV preferred)

Job Responsibilities:

- Commissioning on site of equipment including instrumentation, motors, control panels, and provide technical expertise and support to ensure efficient project delivery.

- Ensure compliance with industry standards and regulations.

- Conduct troubleshooting and fault finding activities as required.

- Perform on-site hardware and software support during system deployment, commissioning and operation.

- Maintenance of ICA (Instrumentation, Control, and Automation) equipment.

- Collaborate with the team to write URS (User Requirement Specification) and FDS (Functional Design Specification Documentation.

- Resolve the site technical related matters and other ad-hoc assigned tasks.

• Job Requirements:

- Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.

- 3-5 years experience in Instrumentation, Control, & Automation design works installation, testing and commissioning.

- Able to work independently in producing the project deliverables to meet the project timeline.

- A flexible mind with the ability to assimilate large amounts of different data at one time.

- Proficient in written and oral communication with good interpersonal skills.

- Working knowledge using Microsoft, MS Project and related software.

The Project Engineer/Site Engineer is responsible for all project related matters for building construction works, steel works, A&A works, renovation works, etc

• Supervise and checking of all subcon and internal team, to ensure carried out in accordance to contractual specifications, quality standards, statutory compliance & client's requirements and safety.
• Assist Project Manager in all project matters, on-site technical/ engineering matters and authority submissions.
• Cooperate with site supervisor for all project and technical matters.
• Preparation of project weekly & monthly report, master schedule, micro task program, method of statement, construction sequence, hoisting plan, safe work procedure, risk assessment, any other technical documents.
• Co-ordinate works with Clients / Sub Contractors / Suppliers / Consultants.
• Plan & track the project progress, all site works, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all aligning with the project completion timeline.
• Technical expertise and knowledge in foundation, structural and building and steel works
• Other adhoc duties by Management assigned from time to time.

Requirements:

• Degree in Civil or Structural Engineering
• 3-5 years civil engineering project management / building construction in construction industry
• Excellent leadership, time management, analytical, communication, presentation and interpersonal skills
• Organized, meticulous with positive work attitude

Empowering careers at ARJO

At Arjo, we know what moves us. We go above and beyond for people facing mobility challenges. We take every opportunity to work and grow as one team and take pride in sharing our knowledge and experience. Does that sound like something that moves you too?

This could be your opportunity to begin a challenging and rewarding career in a healthcare company that empowers movement for people with mobility challenges.

What is the Opportunity?

A fantastic opportunity now exists for an enthusiastic and experienced Service Engineer to join our passionate, highly driven and successful Service Team based in our Singapore office.

Reporting to the Senior Regional Service Manager, the role of Service Engineer you will apply your technical knowledge to troubleshoot, repair, and maintain Arjo equipment and products for the Arjo customer on-site within the care facility. You will support customers by securing the best possible condition for mobility products and solutions. Your skills will help empower movement for people facing mobility challenges and increase the quality of lives for residents, patients and caregivers.

Your role will involve:

• Provide equipment on-site inspection, corrective & preventive maintenance activities & repair services to hospital, nursing home and home patients;
• Collaborates with user/s and department/s to understand needs and enable them with solutions;
• Timely completion and reporting of documents;
• Ensures accurate documentation on repairs/assessment/PM’s;
• Respond to breakdown calls;
• Promote service contracts;
• Maintain the safety and integrity of all serviced products in accordance with Company Policy;
• Be well presented and uphold the company's brand and guiding principles;
• Be able to operate within the companies OH&S guidelines including adherence to infection control policies and procedures;
• Any adhoc duties as assigned.

To be successful in this position, you will possess:

• Diploma/Degree related to Engineering, Computer Engineering/Science or related discipline
• Possessed at least 1-3 years of experience in IT network connectivity/integration-HL7 programming
• Technical background and/or with Autocad knowledge;
• Strong analytical skills, meticulous, energetic, resourceful and able to work under pressure;
• Field experience preferably within the Healthcare or service related sector;
• Proven track record of providing exceptional customer service by possessing good interpersonal and communication skills.

What we will offer in return

Work in a highly engaged and vibrant workplace culture. A flexible work environment, including hybrid (remote and office) work arrangements. You will support our vision to be the most trusted partner in driving healthier outcomes for people facing mobility challenges. In return, we recognize and value our global employees. You will have our full support, training and opportunities for professional development.

Why diversity matters to us

At Arjo, we believe in the power of diversity. We strongly encourage applicants from all parts of society, which means building a more diverse, equitable, inclusive and engaging environment – not only in the workplace, but also within the communities that we serve, work in and live in. We achieve this through a culture and mindset that values the uniqueness of all our people.

For more information about Arjo visit www.arjo.com

Successful applicants will be required to undergo relevant reference checks and a pre-employment medical check prior to appointment.

For those with a passion to improve mobility outcomes for others, a rewarding career at Arjo awaits. We look forward to receiving your cover letter and resume!

Job Description :

• Design and implement Building Management Systems for commercial, industrial, or residential buildings.
• Analyze project requirements, propose technical solutions, and oversee the implementation of BMS systems.
• Develop and program control logic for to optimize building operations and energy efficiency.
• Troubleshoot and debug control systems to ensure optimal performance and integration.
• Configure and integrate high-level communications for devices, including sensors, controllers, actuators, and field devices.
• Ensure smooth communication between BMS components and external systems.
• Design, develop, and implement user-friendly BMS graphics and dashboards to provide operators with real-time insights into building systems.
• Ensure that graphics are intuitive and provide comprehensive control and monitoring features.
• Implement and maintain SCADA systems for large-scale monitoring and control of building operations.
• Integrate SCADA systems with existing BMS components to provide centralized control.
• Create and maintain detailed design, development, and implementation documents, including system architecture diagrams, control logic, and commissioning reports.
• Ensure that all design and development documents are up-to-date and accurate for future reference.
• Collaborate with other engineers, designers, and stakeholders to deliver high-quality solutions.
• Provide technical support during project implementation and post-installation phases.
• Assist in training building operators on the proper use and maintenance of the BMS system.

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Hands on experience in DDCs and PLCs
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager/Planning Manager for the successful execution of the project
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues
• Attend all project meetings and progress meetings relating to meeting master program schedule
• Ensure good M&E drawing management and the control of M&E documentation/filing on site
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements & all M&E shop drawings, materials and method statement are to be approved before use
• Ensure all M&E site activities are well-planned, well-coordinated and on time
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance with the approved shop drawings, materials and method statements
• Prepare accurate and comprehensive M&E progress report with photographs when required
• Arrange for all M&E T&C works
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities
• Work closely with EHS Department to ensure strict compliance of safety regulations.Requirement:
• Degree in Mechanical/Electrical Engineering or related disciplines
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects
• A team player and able to communicate well with all level

Responsibilities

1. Build and maintain strong relationships with key customers, understanding their technical requirements, challenges, and business objectives.

2. Collaborate with sales, marketing, product management, and engineering teams to align Field Application Engineer activities with design win targets, product roadmaps, and market trends.

3. Drive customer feedback and insights internally to inform product development, roadmap prioritization, and service improvements.

4. Represent the company at industry events, conferences, and customer meetings to promote our semiconductor solutions and gather market intelligence.

Requirements

1. With Embedded system programming hands-on experience.

2. Preferred candidates with experience developing camera system or video pipeline applications.

3. Looks for SW engineers that understands the complete SW application development requirements of the customer and help customers integrate company’s SW libraries and explain the workflow of the SW System.

4. Bachelor's degree in engineering, computer science, or a related technical field. Experience at the solution level, with a strong understanding of HW & SW to debug issues, define solutions, and engage customers on their full AI system.

5. Advantages: Prior experience with edge AI solutions and architectures

6. Prior experience with ML tools & coding languages

7. Understanding of the AI edge inferencing market and applications

Job Description:

This role will support and collaborate with Design, planning, solution architect, application and Development teams on infra build requirements, standards and the use, optimization and troubleshooting of all features in VMware, Linux, Windows & its tools.

This role will participate in technical discussions to share ideas and provide feedback in continuing the improvement of the Service Build Engineering team in areas such as Optimization, automation, cost savings, technology adoption & operational efficiency.

Key Skill

- Red Hat Enterprise Linux (RHEL) and Windows Administration

- Must Have:

o Intensive experience in supporting RHEL for JBOSS/WebSphere/WebLogic, Oracle DB is a must

o Intensive experience in supporting RHEL in DMZ is a must

- Professional understanding of networking related to RHEL and Windows

- Professional understanding of SAN Storage related to RHEL and Windows

- Good understanding of large Data Center Facilities operation

- Hands-On experience supporting various Infrastructure agents like NetBackup, BMC Patrol

- (Mid-Level) vSphere 5.x and 6.x

- Cross-team collaboration with storage, network, security and application delivery

- Technical leadership quality to handle technical challenge and sensitive situations

- Integrate the server automation process either by custom scripts or via third-party solutions(Chef)

- Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

- Strong communications skills

- Excellent spoken and written English communication skills

Job Description:

· To make sure that PLC and SCADA system equipment are tested and commissioned in conformity with the design drawings, testing procedures, safety measures and QA/QC system.

· To manage the PLC Testing & Commissioning activities (Integration, Validation, SAT, and ITC)

· Software design, configuration, programming, testing installation, commissioning, optimization, and

maintenance of multiple PLC and STEP7 SIMATIC MANAGAER and Siemens PCS7 process control systems or

Siemens DCS systems.

· Developing of Process Logic in Ladder, Statement List and Functional Block Diagram, Continuous Function Chart

(CFC), Structured Control Language (SCL), SIEMENS- various SERIES using STEP7 SIMATIC MANAGER. Conversant with IEC 61131-3 (international standard for programmable controller programming languages).

· Knowledge working in Allen Bradley PLC1756-L56, using AB RS Logix 5000 for programming, using Kepware

OPC server (KEP Server EX).

· Knowledge in Profibus DP, Ethernet, Modbus RS485 and TCP /IP, IEC61850.

· To carry out Point-to-point test with substation electrical equipment.

· To carry out Point-to-point test with SCADA interface.

· To ensure the testing are in conformance with testing procedures.

· To management and update of the modification’s details for future as-built file.

· To prepare testing procedures & test forms.

· To record the test results in the test forms and prepare for report submission.

· Transmission of data to the QC Engineer whenever the issuances of a Corrective Action Requests.

· To attend the testing meetings relevant to his sites and participates during site visits.

· To co-ordinate activities with the Client and the external interface parties (Subsystem Work Contractors)

· Manage his team staff, preparing work schedules and assigning specific duties.

· To plan the activities and to follow-up the proper progress against deadlines and manpower.

· To co-ordinate with client and consultant, on Site acceptance test and ensure that established procedures are

complied.

Job Requirements:

· Bachelor’s degree in business, Electrical Engineering, or a related field.

· Experience in business development or sales within the power supply, railway and other electrification sector is

highly preferred

· Excellent negotiation, communication, and interpersonal skills.

· Ability to build strong relationships with clients and industry stakeholders.

· Results-oriented with a proactive approach to problem-solving.

· Proficiency in Microsoft Office Suite and CRM systems.

· Knowledge of the railway electrification industry and relevant regulatory standards.

• Assists Project Manager in the co-ordination of project management activities to ensure that projects are executed in a smooth and effective manner;
• Attends external project kick-off meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting;
• Assists Project Manager in carrying out all shop drawings and submission with Drafting Department;
• Assists Project Manager in carrying out risk assessment and other risk management activities; makes recommendations on risk control measures; communicating risk assessment to all workers;
• Ensures all contractors are safety inducted and issued with Permit before work commencement;
• Ensures the adherence to the safe work procedure (SWP) established; to inform project manager or project director of any shortcoming in the SWP or risk control measures implemented;
• Ensures the familiarization with the scope of works;
• Resolves site problems proactively in a timely manner and seeks advice from Project Manager as appropriate;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by cutting materials wastage, reducing labour cost, usage of tools and equipment, etc;
• Assists the Project Manager in conducting Mass Tool Box meeting with safety personnel;
• Ensures proper project documentation including email communication;
• Assists in promoting good team morale and team spirit in the project team;
• Strong in Structural work

Jason Energy Pte Ltd, a wholly owned subsidiary of Jason Marine Group Limited has significant experience in providing completed integrated telecoms for the offshore/onshore oil and gas industries. As a recognised Telecommunication System Integrator in the oil and gas global market, we provide turnkey project systems that covers a full spectrum of services from the areas of engineering design, project management, supply, integration, installation, testing, commission, and maintenance.

We are looking for a Project Engineer to prepare, schedule, coordinate and monitor the projects that are being assigned to him/ her. Reporting to the Project Manager in the Project Team, he/ she will

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements:

• Diploma or Degree in Engineering or relevant field
• Proven working experiences as a project engineer
• Project management and organizational skills
• Commitment to exceeding customer’s expectations
• Time management and organization skills

Good to Have

• MS Office Skills
• Microsoft Project Skill
• Dynamic Business Central knowledge will be an advantage
• Negotiation skills

Job Description

• Collaborate with internal stakeholders to understand their procurement needs and provide support and guidelines as required.
• Conducts timely market reviews and request for price proposal (RFQ) in accordance with internal purchasing rules and guidelines.
• Negotiates quantities, prices, delivery schedule, terms and conditions of delivery and payment/contractual terms.
• Ensure timely PO execution to meet production needs.
• Drives resolution to supply chain issues affecting quality, cost, delivery or lead-time, which may includes engagement with manufacturers/sub-tiers in the supply chain.
• Identifies and realizes cost savings opportunities and execute cost reduction initiatives assigned
• Prepare all relevant weekly, monthly reports
• Other duties as assigned

Job Requirement

• Bachelor Degree in Engineering or equivalent.
• Entry level candidate or 2-3 years working experience in semiconductor industry.
• Detailed oriented, Positive attitude, self motivated, target drive.
• Meticulous and strong in numbers.
• Excellent analytical and problem solving skills.
• Good understanding of procurement best practices & industry trends.
• Strong communication and interpersonal skills with the ability to effectively collaborate with internal and external stakeholders.
• Processes the ability to read, write and communicate in Mandarin with Chinese-speaking vendors and internal Chinese-speaking stakeholders
• Self-starter with good initiative and a team player personality.
• Dynamic individual capable to work under stress and multitask in a fast-paced environment.

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Set and advance sustainability targets, balancing financial and environmental goals.
• Implement effective reporting systems; collaborate on performance benchmarks.
• Lead sustainability communications; create educational materials.
• Formalize sustainability practices through documentation and reviews.
• Monitor and report on sustainability metrics; conduct audits.

Requirements

• Experience in a related field preferred.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Role:Storage Engineer

Key Responsibilities

1. Storage Management

• Install, Configure, and Maintain: Implement Storage Area Networks (SAN) and enterprise backup solutions.
• Health Checks & Troubleshooting: Perform regular health checks, monitoring, and troubleshooting for HP Nimble, Dell, NetApp, and Hitachi devices to ensure optimal availability and performance.
• Integration & Interoperability: Integrate storage solutions (HP Nimble, Dell, NetApp, and Hitachi) into customer IT infrastructures for seamless functionality.
• System Upgrades: Perform firmware updates and necessary system upgrades, particularly for Hitachi SAN environments.
• Documentation: Maintain detailed records for storage configurations, maintenance, and troubleshooting procedures.
• Disk Management: Manage disk partitioning and Logical Unit Number (LUN) assignments (create, modify, or delete LUNs).
• Performance & Capacity Planning: Monitor and manage storage subsystems, conduct capacity planning, and optimize performance for HP Nimble, Dell, NetApp, and Hitachi storage arrays.
• SAN Troubleshooting: Troubleshoot zones and switch-related issues, especially with Cisco/Brocade SAN switches.
• Security Administration: Administer and manage security configurations within the storage subsystems.

2. Backup Solutions Management

• Symantec Backup Administration: Administer and manage enterprise backup solutions.
• Backup Jobs Scheduling: Schedule and configure backup jobs to ensure data protection across NetApp, Hitachi, and other systems.
• Performance Optimization: Optimize backup server performance and troubleshoot backup-related issues promptly.
• Capacity Planning: Plan for tape libraries and backup servers to support growing data needs.

3. Disaster Recovery (DR)

• DR Planning & Execution: Develop and execute Disaster Recovery (DR) strategies to ensure quick and reliable recovery of critical systems.
• DR Testing: Verify successful recovery of production or DR servers during DR exercises.

4. Storage Solution Implementation

• Customer Collaboration: Work with customers to integrate HP Nimble, Dell, NetApp, and Hitachi Storage solutions into their infrastructure.
• Testing & Validation: Prepare test plans and conduct functional checks to validate that storage systems meet customer requirements.

5. Additional Duties

• Advanced Support: Provide second- and third-level support for advanced storage issues, particularly with HP Nimble, Dell, NetApp, and Hitachi solutions.
• Data Center Operations: Assist with data center shutdown activities and recovery operations as needed.

Requirements

Education

• Diploma or Degree in Information Technology, Information Systems, Computer Science, Business IT, or related fields.

Experience

• Minimum 5 years of experience managing Enterprise Backup Solutions and Storage Area Networks (SAN).
• Hands-on experience with:HP Nimble Storage: Administration, troubleshooting, and configuration.
  Dell Storage: Working with arrays, SAN systems, etc.
  NetApp Storage: Implementation, management, and troubleshooting.
  Hitachi Storage: Configuration, administration, and integration.
  
• Additional experience with:IBM V3700 & V7000
  EMC Unity/VNX
  NETAPP Storage (FAS, AFF series)
  Hitachi VSP, HNAS, and HCP Systems
  EMC Isilon/NAS Products
  Cisco/Brocade SAN switches
  NETBACKUP or Veeam
  IBM Tape Libraries
  
• Experience with storage replication, backup configurations, and conducting DR exercises.
• Proficiency in power cycling storage devices and upgrading SAN switches.

Skills & Abilities

• Strong troubleshooting and problem-solving skills to resolve SAN and storage issues efficiently.
• Excellent verbal and written communication skills.
• Ability to work independently with minimal supervision.
• Collaborative team player with strong customer service orientation.

Desirable

• Prior experience working in the government sector or within a services business in a high-tech environment.
• Familiarity with SAN protocols, including FC, iSCSI, and FCoE.
• Extensive experience in managing and optimizing Hitachi and NetApp storage systems, including ONTAP and VSP management.

12-hr rotating shift, 7.30am - 7.30pm, 7.30pm - 7.30am

Responsibilities

• Responding to intrusion alarm system activations
• Performing maintenance services on alarm systems
• Commissioning new alarm systems
• Attending to customer requests regarding alarm and card access systems
• Conducting night patrols

Requirements

• At least a Higher Nitec qualification
• High level of energy
• Good interpersonal communication skills
• Valid Class 3 license
• Min 1 year of working experience
• Enhanced Basic Security certification is an added advantage
• Ability to work 12-hour rotating shifts

Devon Yang Yue Teng

EA License No: 24C2352

Reg No: R24123723

The Software engineer is required to work as a member of the electronic system design team.

Require Skills:

- Knowledge in Linux OS , Python, Verilog, Synopsys

- Knowledge in Embedded system and Network communication

- Good skill in C/C++ programming

- Able to co-operate with system designer and hardware engineer.

- Good communication skill.

Responsibilities:

- Perform C/C++ software programming in embedded Linux system.

- Manage software evaluation and test.

- Write test plans and reports.

- Write driver for devices under embedded Linux OS

- To work on network / communication software coding.

- Software integration and report.

- Report to software chief engineer.