Total 477,585 Full-time job vacancies

Job Description

The fresh or experience Project Engineer is to handle complex projects, mainly in the Air Conditioning and Mechanical Ventilation (ACMV), in accordance with company procedures, including the continuous improvement of productivity, customer satisfaction, schedule, delivery and safety performance.

Job Responsibilities

• Assist the Senior Project Engineer and Project Manager in execution of Project Management, Project Schedule, and Coordination with sub-contractors
• Engaging in project engineering of ACMV Systems
• Managing project timelines and budgets, coordinating with contractors and subcontractors, and overseeing the installation and commissioning of HVAC systems
• Conducting site visits and inspections to ensure that work is being completed according to specifications and quality standards
• Providing technical support and troubleshooting assistance to clients and project teams, and resolve any issues that arise during the project lifecycle
• Maintaining accurate project documentation including drawings, specifications, and project reports
• Ensure project delivery according to dateline given, ensure cost control and profitability of project
• Assist in site administration
• Preliminary design and budgeting for Design and Build tenders

Job Requirements

• Min. 2 years of related working experience in ACMV works
• Diploma in Mechanical Engineering or equivalent
• Strong technical knowledge of HVAC systems, including equipment selection, load calculations, and ductwork design
• Familiarity with local building codes and regulations related to HVAC systems
• Good project management skills, including the ability to manage timelines, budgets, and resources effectively
• Strong communication and interpersonal skills, with the ability to work collaboratively with clients, contractors and project teams
• Proficiency in AutoCAD and other design software
• Strong analytical and troubleshooting skills

Ensure customers have a memorable and pleasant dining experience.

Job Duties:

• Accomplishes restaurant human resource objectives by recruiting, selecting, orienting, training, assigning, scheduling, coaching, counseling, and disciplining employees; communicating job expectations; planning, monitoring, appraising, and reviewing job contributions; planning and reviewing compensation actions; enforcing policies and procedures.
• Achieves restaurant operational objectives by contributing information and recommendations to strategies plans and reviews; preparing and completing action plans; implementing production, productivity, quality, and customer-service standards; resolving problems; completing audits; identifying trends, determining system improvements; implementing change.
• Meets restaurant financial objectives by forecasting requirements; preparing an annual budget; scheduling expenditures; analyzing variances; initiating corrective actions.
• Plans menus by consulting with chefs; estimates food costs and profits; adjust menus.
• Controls cost by reviewing portion control and quantities of preparation; minimizing waste; ensuring high quality of preparation.
• Avoids legal challenges by conforming to the regulations of the alcoholic beverage commission.
• Maximizes bar profitability by ensuring portion control, monitoring accuracy of charges.
• Publicizes the restaurant by designing and placing advertisements; inviting food editors to review the restaurant; contacting local, regional, and national magazines with feature ideas; encouraging local businesses to hold social events at the restaurant.
• Maintains safe, secure, and healthy environment by establishing, following, and enforcing sanitation standards and procedures; complying with legal regulations; securing revenues; developing and implementing disaster plans; maintaining security and sprinkler systems; maintaining and walkways.
• Maintains ambiance by controlling lighting, background music, linen services, glassware, dinnerware, and utensil quality and placement, monitoring food presentation and service.
• Updates job knowledge by participating in educational opportunities, reading professional publications; maintaining personal networks; participating in professional organizations.
• Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Job Description & Requirements

• To ensure that all the dishes are freshly prepared and the food standards are met.
• Plan and arrange ingredients for next day preparation and orders.
• Need to understand the customer requirements, as per order.
• To Introduce new dishes and menus.
• Need to monitor stock rotation procedures are followed as per inventory.
• To maintain quality of food
• A deep understanding of authentic indian food preparation.
• Capacity to work under pressure during the extremely busy period.
• Set up workstations with all needed ingredients and cooking equipment
• Prepare ingredients to use in cooking (chopping and peeling vegetables, cutting meat etc.)
• Cook food in variousutensils or grillers
• Well knowledge in south indian cuisine.
• Check food while cooking to stir or turn
• Ensure great presentation by dressing dishes before they are served
• Keep a sanitized and orderly environment in the kitchen
• Ensure all food and other items are stored properly
• Check quality of ingredients
• Monitor stock and place orders when there are shortages

Job Description

The BIM Modeler is responsible in ensuring that all structural drawings and specifications are completely compatible with project requirements by creating and modifying existing engineering designs and models.

Job Responsibilities

• Assist BIM Coordinator in creating, updating, and revising BIM Models throughout the project life cycle
• Prepare drawings and detailed design documents for preliminary, construction and as-built status by using BIM Modelling, AutoCAD, Revit
• Assist Project Engineers and Project Managers at all levels
• Remain constantly updated with the drafting technology to maintain technical competency
• Draft plans and detailed drawings for structures, installations, and construction projects working from sketches or notes
• Finish and duplicate drawings and documentation packages, according to required mediums and specifications for reproduction using blueprinting, photography, or other duplicating methods
• Determine quality, cost, strength and quantity of required materials, and enter figures on materials lists
• Explain drawings to production or construction teams and provide adjustments as necessary

Job Requirements

• Min. 3 years of related working experience
• Diploma in Engineering or equivalent
• Proficiency in BIM software such as Revit and AutoCAD
• Knowledge of construction processes and project management
• Strong communication and collaboration skills
• Ability to manage multiple projects and prioritize tasks
• Attention to detail and ability to identify and resolve conflicts in BIM models
• Familiarity with BIM standards and procedures
• Proactive and ability to meet deadline
• Able to work independently and productively under minimal supervision

Responsibilities:

• In-charge of overall maintenance of trees and landscape sites,
• Supervise and control the contractors
• Liaise with related government agencies regarding horticultural works.

Requirements:

• Diploma in Landscape Design & Horticulture or other related courses.
• Entry level in relevant Diploma are welcome to apply
• Must be a team player with high integrity, leadership, problem solving and interpersonal skills
• Able to work under pressure and tight deadlines

Working Days: 5 working days (with 1 half-day Saturday every 3 weeks)

We regret to inform that only shortlisted candidates will be contacted.

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain — and we’re looking for talented people who want to help.

You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.

At AWS Cloud Logistics (ACL), we work together to #MoveTheCloud. Our team designs and delivers the technology that our logistics teams rely on every day. We’re innovators, communicators, and problem-solvers who lead, advocate, and influence.

Role Overview:
As a Customs Brokerage Program Manager at AWS, you will lead strategic initiatives to optimize our global customs operations and enhance our cross-border logistics capabilities. This role sits at the intersection of technology and international trade, requiring you to drive innovation in customs brokerage processes, data integration, and compliance management across multiple regions.

You will spearhead the development and implementation of advanced information systems, focusing on seamless integration with customs brokers worldwide. Your responsibilities will include overseeing the rollout of various data transmission solutions, from immediate fixes to long-term, scalable platforms. As the central point of contact for global brokerage teams, you will ensure consistency in operations, maintain compliance standards, and drive continuous improvement in our customs clearance processes.

This position offers the opportunity to make a significant impact on AWS's global supply chain efficiency, working with cutting-edge technology to streamline international trade operations. Your success in this role will be crucial in supporting AWS's rapid growth and maintaining our competitive edge in the cloud services market.

Key job responsibilities

• Lead the strategic development and global implementation of advanced customs brokerage information systems, focusing on data integration, solutions, and compliance management across all regions.
• Oversee end-to-end project lifecycles for customs technology initiatives, from conception to post-launch support, ensuring seamless execution and continuous improvement of implemented solutions.
• Serve as the primary liaison for internal and external stakeholders, including engineering teams, technology providers, and logistics partners, to drive program success and align with organizational goals.
• Develop and maintain comprehensive performance metrics for global brokerage operations, while spearheading the integration of innovative technologies to enhance cross-border logistics capabilities and streamline customs processes.

About the team

Diverse Experiences
Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.

Why AWS
Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating — that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.

Work/Life Balance
We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud.

Inclusive Team Culture
Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness.

Mentorship and Career Growth
We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional.

Basic qualifications

• Minimum of 3 years of direct experience in import/export compliance and handling imports/exports per foreign government regulations.

• 3+ years of technical product or program management experience

• Experience managing technical programs across cross-functional teams, building processes and coordinating release schedules

• Strong analytical and quantitative skills, with a drive for continuous improvement.

• Ability to handle multiple priorities simultaneously in a fast-paced, ambiguous environment.

Preferred qualifications

• Global logistics or supply chain experience is preferred.

• Experience utilizing data-driven process improvement tools and metrics.

• Experience engaging with customs/regulators and representing complex import/export requirements.

• Bachelor's degree in Logistics, Supply Chain, Business, Engineering, Economics, Science, or equivalent relevant experience.

Responsibilities:

• Lead/Manage the project team to complete projects on time, on budget and according to client and authority's requirements
• Manage multiple projects concurrently from design stage to project completion
• Drive continuous improvement for architectural services by reviewing current workflow practices together with management
• Establish good working relationships with different parties to promote continued partnerships
• Support the procurement of new business
• Mentor and supervise the training and development of the team

Requirements:

• Min. 5 to 10 years' relevant experience as project architect
• Possess a Degree in Architecture or accreditation with Professional Bodies of equivalent standing such as the Board of Architects (BOA)
• Experience in AutoCAD, Revit, Lumion, Sketchup, Photoshop, Enscape
• Experience in delivering projects from concept to completion of construction
• Experience in private and public residential project in Singapore will be an advantage

JOB DESCRIPTION

• Conduct both indoor and outdoor activities for primary school students
• Ensure students' welfare and safety are being taken care of
• Supervise students to ensure completion of homework and that spelling revision is done
• Support in dismissal duties

REQUIREMENTS

• Min. GCE “O” level and above
• Able to lead and manage primary school students
• Good communication skills
• Passion working with primary school students
• Able to commit at least 3 weekdays a week

WORKING HOURS

• Usually 12.30pm to 6.30pm (weekdays)

JOB DESCRIPTION

• Oversee the daily operations of a school-based student care centre
• Liaise with HQ, parents and school with regards to students and Centre matters
• Mentor, lead and motivate staff in their work
• Ensure that programmes and activities are carried out as per set curriculum
• Plan for manpower and logistics
• Handle fees payment and follow up on fees arrears
• Ensure proper documentation and timely submission of applications, withdrawals of enrolment and fees assistance schemes
• Maintain updated records of students' profile and finance matters
• Handle enquiries and provide regular feedback
• Other related duties as assigned by the Superior

REQUIREMENTS

• At least 2 years of relevant experience in managing a Student Care Centre, Childcare Centre, or Kindergarten
• Polytechnic Diploma and above
• Possess good communication skills
• Meticulous and able to multi-task

WORKING HOURS:

During normal school term: 10am to 7pm (Mon to Fri)

During school holiday: 9 hours shift between 7.30am to 7pm (Mon to Fri)

Roles & Responsibilities

Roles & Responsibilities

Key Responsibilities:

• Operations Management: Oversee the daily operations of the beauty center, including scheduling appointments, managing staff, and ensuring smooth service delivery.
• Staff Management: Recruit, train, and supervise beauty therapists, estheticians, and support staff. Conduct performance evaluations and provide ongoing training and development opportunities.
• Customer Service: Ensure a high standard of customer service is maintained. Address client inquiries, complaints, and feedback to enhance the overall experience.
• Financial Management: Manage the center’s budget, monitor expenses, and ensure profitability. Handle cash management, invoicing, and financial reporting.
• Sales and Marketing: Develop and implement marketing strategies to promote services and products. Analyze sales data and customer trends to maximize revenue opportunities.
• Inventory Management: Oversee inventory levels of beauty products and supplies, ensuring adequate stock and maintaining vendor relationships for supply procurement.
• Compliance and Safety: Ensure compliance with health and safety regulations, industry standards, and company policies. Maintain a clean and hygienic environment.
• Service Development: Stay updated on industry trends and emerging treatments. Introduce new services and promotions to attract and retain clients.

Requirements:

Education and Qualifications:

• Education: A degree or diploma in business management, cosmetology, or a related field is often preferred.
• Certification: Relevant beauty therapy or management certifications may be required, depending on the services offered.

Experience:

• Proven experience in a managerial role within the beauty or wellness industry is essential.
• Experience as a beauty therapist or esthetician may be advantageous.

Skills:

• Leadership Skills: Strong leadership abilities to motivate and manage a diverse team effectively.
• Communication Skills: Excellent verbal and written communication skills for interacting with clients, staff, and vendors.
• Customer Service Orientation: A strong focus on providing exceptional customer service and addressing client needs.
• Financial Acumen: Understanding of budgeting, financial reporting, and business operations.
• Sales and Marketing Skills: Ability to create and implement effective marketing strategies and promotions.
• Problem-Solving Skills: Strong analytical and problem-solving skills to address challenges and improve operations.

Personal Attributes:

• Passion for the beauty and wellness industry with a keen eye for trends and quality.
• Strong organizational and time management skills to handle multiple tasks efficiently.
• Ability to work in a fast-paced environment and adapt to changing demands.

Working Conditions:

• The role may require working flexible hours, including evenings and weekends, to accommodate client schedules.
• The Beauty Centre Manager typically works in a salon environment, which may involve standing for extended periods and engaging directly with clients and staff.

*ADDITONAL SKILLS REQUIRED:*

· Performing various skin treatments according to clients’ needs, such as facial/skin treatments.

· Scheduling client’s appointments

· Data entry of client's information

· Keep documentation and maintain client’s files

· Perform pre-treatment and after treatment consultation

· Acknowledge and respond to relevant client’s queries, needs and expectations

· Suggest and promote retail products or additional services

· Stock taking

· Ensure treatment rooms are clean and neat

· Any other administrative task when required

JOB DESCRIPTION

· Provide routine care and conduct health checks for the children

· Plan and prepare for programmes for the children

· Conduct and supervise class activities / field trips

· Prepare and serve simple meals for the children

· Ensure compliance to safety and health standards

· Maintain a conducive and positive learning environment for the children, including washing and sanitizing of toys and sleeping cots

· Handle emergencies and administer first aid, where applicable

· Update parents on children’s learning and development progress

REQUIREMENTS

· GCE “O” level with minimal C6 in English

· At least 1 year of experience working in preschool or student care settings

· Applicants with WSQ Student Care, WSQ Student Care Centre (Early Years / Early Childhood) or Certificate in Early Childhood and Care Education will have an added advantage

· Those without relevant qualification will be sent for the courses

· Passion working with children

WORKING HOURS

During normal school term: 9.30am to 7pm (Mon to Fri)

During school holidays: 9.5-hours shift between 7am to 7pm (Mon to Fri)

This position will be responsible for providing quality repair and carrying out preventive maintenance service of etch / clean / deposition equipment at customer sites. Other activities include installation, relocation of customer equipment, performing associated start-up and check-out activities.

• Install and/or relocate equipment at customers’ sites. Conduct associated start-up, cut over and check-out activities on the newly installed systems
• Provide warranty tool support or paid service for out-of-warranty tool by performing on-site general preventive maintenance of equipment and attending to equipment abnormalities. Co-ordinate all service actions with customer to minimize downtime or system interruptions
• Apply troubleshooting techniques to eliminate equipment malfunctions. Conduct diagnostic procedures to isolate problem. Assess severity of malfunctions and determine corrective actions required or escalate for assistance and prompt resolution. When necessary, replace defective units, components or parts where appropriate
• Liaise and co-ordinate with customers in relation to short-term defect work
• Implement field modifications or updates as released in Engineering Change Orders (ECOs) which may involve removal and installation of assemblies, sub-assemblies, systems and subsystems
• Carry out Tier 2 process qualification work
• Prepare and maintain accurate logs, service records, part usage documentation, diagnostic updates and other management reports
• Professionally represent the company to the customer. Utilize knowledge of company’s product lines and services to keep existing / potential customers informed when new/additional needs are identified
• Develop good customer relations during installation and execution of service contracts
• Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
• Ensure safe working condition at work site
• Any other duties as assigned by the Immediate Supervisor

Job Requirements

• Engineering degree or equivalent
• Good communication and interpersonal relations skill
• Able to actively engage customers on technical solutions
• Able to work in Fab environment and perform shift & standby duties
• Must be able to wear personal protective clothing which comprises of air respirator equipment, clean room garments and safety shoes
• Willing to support short term, overseas assignment

Responsible for fabrication related to welding processes and assembly of airport ground support equipment. Responsible to customers' requirements for the products to be operating properly. Also provide after sales services and maintenance of airport non motorised equipment like Pallet Dolleys, Baggage Trolleys, Container Trailers, Tow Passenger Steps, Tow Belt Loaders etc.

Responsibilities:

• Promote medical-grade beauty products and effective beauty and aesthetic treatments.
• Identify clients’ beauty and aesthetic needs and provide professional advice and tailored solutions.
• Create a positive experience for all clients by providing attentive and quality service.

Job Requirements:

• Minimum 1 year of sales experience.
• With Beauty and/or Aesthetics experience will be an advantage.
• Well-groomed, proactive and self-motivated.
• Excellent interpersonal, negotiation and communication skills.
• Strong language proficiency to correspond with English and Mandarin speaking clients.

Staff Benefits:

• High Basic Salary + Allowances + Attractive Commission
• Career Progression
• Fun and inclusive working environment
• Outpatient Medical & Dental Benefits + Health Screening
• Staff Discounts
• Birthday leave
• Complimentary facial treatment

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Position: Aftersales Support Executive

Working location : Boon Lay ( office)

Working days : 5 days

Working hours : 8am - 5pm

Salary : $2,500-$3,500

Description:

• Preparation of Quotation for both spare parts and service attendance to customer
• Preparation and issue service kits and spare parts to service engineers
• Maintain good rapport with customers
• Attend to technical enquiries from customers
• Pick & pack of spares when necessary
• Prepare shipping documentation and arrange delivery with courier companies

Job Requirements:

• Able to read and understand schematic and block diagrams(Training will be provided)
• Min. Diploma in Electrical and Electronic

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

· Responsible for assisting Project coordinator, manager to plan, manage and ensure smooth implementation and monitor of projects assigned from inception to completion on time and of desired quality

· Responsible for assisting to manage and monitor site operation, workers and contractors

· Responsible for effective site administration which include site safety and control of materials and machinery on site

· Support the Project supervisor and manager as needed

· Ensure smooth job operations

· Record workers working time, arrange and supervise worker during working hours

· Able to rectify and supervise works done on site

· Other duties as assigned

Requirements:

· Having relevant working experience in construction industry / project site work is beneficial

· Able to read and write in simple English is a plus

· Having driving license is a plus

· Good interpersonal and communication skills

· Working knowledge of construction tools, machinery and equipment

· Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems

· Organizational and Troubleshooting Skills

· Can work well in a team

· Handling complaints, settling disputes, and resolving grievances and conflicts, or otherwise negotiating with others

· Can multitask, must help to do general work if required

· Ability to focus and keep calm under pressure

· Ability to keep track of multiple projects

· Possess good work attitude

ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Description

With over 1,200 restaurants worldwide, Gyu-Kaku, a new style of Yakiniku restaurant provides high-quality services and low-price Yakiniku to a wide range of customers. Our philosophy “Kando Sozo” ensures and expose you to our customers’ happy faces, thus we are looking for Waiter/Waitress to join in our family today.


Job Description:
1. Provide excellent customer service to our guests.
2. Pro-active in attending to customers’ requests.
3. Understanding our menu and presenting menu to our guests professionally and recommend appropriately.
4. In-charge of full billing processes.
5. Any other duties and responsibilities as assigned.


Job Requirements
1. Part-time positions available.
2. At least 1 year of experience in F&B industry, experience in Japanese restaurants is a bonus.
3. Team player and willingness to learn.
4. Good soft skills.
5. Enjoy Japanese culture and way of life.
6. Mature and positive attitude.
7. Able to commit on weekends and public holiday.
8. Able to accept split shift.

• Position: Service Crew
• Working Days & Hours: 5.5 days (44 hours per week)
• Salary: $2500 - $3200
• Location: Tanjong Pagar

Job Description:

1. Provide service to all customers according to service standard and procedures.
2. Responsible for the preparation work of restaurant opening and closing operation hours.
3. Answering customer’s queries regarding menu items, ingredients or any other product related queries.
4. Includes bar and cashier duties.
5. Maintain quality, service & cleanliness at all times.
6. Any other job related duties requested by Restaurant Manager.

Job Requirements:

• With relevant experience.

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745

Location: Redhill

Working hours: 7.45am to 5.15pm (Mon to Fri); 8am to 11am (Alt Sat)

Job Description

• Greet and meet every customers in the most friendly manner
• Handle calls at all times and charge (wrap up code) accordingly if any
• Act as first point of telephone contact for customer support requests
• Obtain precise customer personal particulars, vehicle registration, car ownership (raise change management form for amendment / update)
• Check for support agreement / warranty validity per local guideline.
• Ensure all inbound/ outbound calls, including customer compliments and complaints logged in CRM system are defined
• Assist in special product campaign or promotions
• Arrange for airport service, pickup and delivery for customers
• Other ad hoc duties assigned

Job Requirements

• Minimum GCE ‘O’ Level
• Minimum 2 years in Customer Service industry
• OT is expected base on business needs, OT payable

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

You will be exposed to one or more of these projects during the internship.

1) Retrofitting of the 230kV GIS Partial Discharge Monitoring System Scope:

- Identify faulty components or equipment of the system

- Submit recommendation to reinstate the system on-line

- Prepare scope of work and specification for the purchase of replacement parts and procure specialist service (if required)

- Reinstate and commission the system.

2) Streamline Protection Relays Records Scope:

- Create database system to organise all SI Test reports

- Scan reports for electronic storage and easy access

- Verify completeness of reports and compliance to ISO standard

3) Assist in project for the replacement of Fire Alarm System for 230kV Switch House Scope:

- Assist in the execution of the project and documentation

- Prepare scope of work and specification for the replacement works

- Assist in the supervision of contractors on-site

4) Plant Reliability Studies

a) 230/400kV Switch House using Failure Mode & Effect Analysis

- Understand the setup of 230kV Switch House (Circuit breakers & components)

- Go through past case studies on switch gear faults

- Identify other possible failure points - Provide recommendations to mitigate the risks

- Review existing risk assessment of switch house

Your Key Responsibilities

• Manage in recruitment process with Hiring Manager.
• Maintain employee's data to be updated.
• Manage staff’s attendance and leave records by HRM System.
• Report and maintain records of staff’s employment movements (i.e. confirmations, promotions, transfers, resignations etc).
• Maintain records of staff’s trainings as per the company’s Training Plan.
• Process relevant work passes for all new non-Singaporean office staff and monitor expiry dates for the same to renew accordingly when required.
• Consolidate data from affiliated overseas Companies and prepare monthly HR manpower reports.
• Organize company's events such as Annual Dinners, Family Days, etc.

We are looking for Professionals

• Has acquired Degree – Preferably in Human Resource.
• Has at least 8 years and above relevant experience.
• With good administrative, planning and implementation skills.
• With good English writing skills.

Position title : Audit Associate
Location: Tangjong Pagar
Working Days: 5 days
Working hours : 9 a.m to 6 p.m
Salary : Up to $3500

Requirement

• At least Diploma
• 1-3 years accounts prefer with some audit experience

Job Scope

• Handling of accounting
• Accounting files and financial statements
• Carrying out audit process

✅The Supreme HR Advisory Pte Ltd EA No: 14c7279

✅SAMUEL SIAW Reg No: R24124745