• Report to QPS and QP (Geo) on all design matters
• Ensure that the contractor's design are in compliance with LTA's specifications and requirements
• Assist to check on the design calculations
• To liaise with AC and QP(D) to ensure that all permits and applications as required by BCA are endorsed in tandem with the progress of the Works
• Lead in the review of Contractor’s submissions required of the Consultant and coordinate with his respective QP(S) and the Contractor’s design teams to ensure prompt resolution of all design-related issues arising from the reviews of the Temporary and Permanent Works.

Responsibilities:

• The Senior Design Engineer (SDE) shall be an engineer in the civil/structural discipline with at least a degree recognised by the Professional Engineers Board of Singapore
• At least ten (10) years of relevant experience on projects similar in nature to vehicular tunnel, including at least five (5)years in the design of geotechnical works for deep excavation

Stand in rate to be discussed during interview.

Job Responsibilities:

1. Responsible for ASIC design evaluation, document writing and RTL implementation of high-energy-efficiency chip;
2. Responsible for module synthesis and power consumption, performance and timing optimization;
3. Responsible for the basic function verification and formal verification;
4. Work with verification engineer to complete the functional verification;
5. Work with back-end physical design engineers to optimize constraint files.

Requirement:

1. Bachelor degree or above, major in microelectronics, computer, electronic information, etc.;
2. Solid digital design knowledge;
3. Familiar with the digital design and verification process and related tools;
4. Familiar with Verilog and system Verilog, familiar with script language is a plus;
5. Sense of responsibility, teamwork spirit.

Responsibility

• Responsible for high-performance block implementation (RTL to GDSII).
• Perform block level floor planning, power grid implementation, APR placement, timing optimization, CTS and routing.
• Close the design to meet timing, power budget and area targets.
• Run physical verification flows (DRC/LVS/EM/IR), and implement fixes to meet the requirements.
• Implement ECO’s to address functional bugs, timing and physical verification violations.
• Responsible for the generation and maintenance of block-level STA constraints and performing STA signoff checks.
• Responsible for timing model generation and supporting the successful integration of blocks into SOC.

Qualification

• At least 1 years of hands-on experience in digital-physical design.
• Master’s/Bachelor’s degree in Electrical Engineering with an emphasis in IC design， master's degree preferred.
• Experience with digital Physical design and Static Timing Analysis
• Experience in floor planning and routing.
• Experience in advanced process nodes (5nm).
• Good experience with Synopsys implementation tools (DC, ICC2), and experience with Cadence (Innovus) implementation tool is a plus.
• Experience in Mentor Verification tool, Calibre.
• Proficient in TCL coding, Perl/Python knowledge is a plus.
• Good written and communication skills.
• Bilingual to communicate with associates in China is perferable.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The Research Fellow will conduct research on cutting-edge foundation models and their reliability issues. This role involves leading research efforts, developing innovative algorithms, managing large data sets, and ensuring the model's accuracy and reliability. The candidate is also expected to work closely with the Principal Investigator on research publications, project applications, as well as supervising junior researchers in the team.

Qualifications:

• PhD in computer science or related discipline.
• Strong background in machine learning, data science, and statistics.
• Strong programming ability.
• Track record of research experience and publications in the area of artificial intelligence, machine learning, computer vision, and natural language processing.
• Proven experience in the implementation and evaluation of machine learning algorithms.
• Proven experience in supervising junior researchers.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The Innovation & Enterprise Fellowship Programme (IFP) seeks to grow the pool of deep-tech talent in Singapore with the capabilities to support the commercialisation of deep-tech research and bring nascent technologies to market. Targeting researchers, scientists, and engineers (RSEs), the programme aims to develop industry relevant innovation and entrepreneurial skills through both formal and on-the-job training.

At EDDC, our goal is to discover and develop novel therapeutics by working collaboratively with public sector and industry partners. EDDC now has an opening and is seeking to recruit a highly motivated and skilled IFP Fellow in our Antibody Design group at EDDC. This is an eighteen-month on-the-job training programme that involves participation in and supporting inter-disciplinary and collaborative drug discovery projects.

We are actively seeking a dynamic and motivated Research Scientist to lead our efforts in developing cutting-edge antibody technologies. In this role, the successful candidate will play a pivotal role at the intersection of technology and biology, employing a diverse range of methodologies from in silico techniques to hands-on experimentation. This position offers a unique opportunity to contribute to groundbreaking research and engineer novel antibodies that address unmet medical needs.

Key responsibilities:

• Employ cutting-edge technologies in antibody discovery and engineering workflows.
• Design and execute hands-on research projects related to antibody and protein engineering.
• Lead scientific project development and ensure timely delivery and achievement of milestones.
• Conduct thorough data analysis and interpretation to extract meaningful insights for guiding project decisions and refine research strategies.
• Collaborate effectively with cross-functional teams, including biologists, bioinformaticians, and relevant stakeholders.
• Clearly communicate research findings through presentations and reports and ensure effective dissemination of results to internal teams and stakeholders.

Requirements:

• Ph.D. in Molecular Biology, Immunology, Biochemistry, or a related field, with strong interest in immunology and inflammation diseases. A minimum of 2+ years of relevant industry experience.
• Demonstrated experience in project management and antibody technologies. Relevant industry or start up experience is a plus.
• Proven experience in antibody discovery, protein engineering, functional immunoassays and relevant technologies.
• Proficiency in in silico methodologies and computational tools is a plus.
• Excellent data analysis and interpretation capabilities.
• Proven ability to collaborate across diverse functional teams.
• Excellent team player with a “can-do” attitude, thriving in a dynamic “start-up-like” environment and team settings.
• Good communication skills (both oral and written), and meticulous record-keeping capability.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Founded in 2001, Convertium is a full-spectrum digital agency. We help clients solve business problems with User-first thinking and design.

The DIGITAL ART DIRECTOR (DAD) position at Convertium is suitable for a senior digital designer with a strong portfolio of web designs at the intersection of beauty and utility.

You must also have good people-skills and are able to mentor junior designers. As DAD, you will be responsible for promoting high standards of:

• creative concept
• design language
• interaction design
• visual communication
• user interface design
• typography
• aesthetics

You must be a formally-trained designer with a solid appreciation of design philosophy and principles. In addition, you need to be current with the latest trends and standards in digital and web design.

At Convertium, you will be exposed to many types of digital creative work, from mission-critical websites to innovative e-marketing projects. Career progression includes team leadership and strategic consulting roles.

Please send in your detailed CV with an online portfolio. Your reward will be great work that belongs in the Webbys and lots of stories to tell your grandchildren.

• Candidate must possess at least a Diploma or Degree in Art/Design/Creative Multimedia, or equivalent.
• Required skills: User Interface Design, HTML5, CSS, JavaScript, PhotoShop, Sketching, Responsive Design, Rapid Versioning, Storyboarding, Interaction Design
• At least 5 years of working experience in the related field is required for this position.

We regret that only short-listed candidates will be contacted.

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,000 - $4,500
Location: Woodlands Ave 9

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The person in this position plays a decisive role in increasing creativity and improving working capacity. Guarantee work achieves and even goes beyond Ogilvy’s creative standard, and always ensure actual effectiveness in terms of the brand and Client’s business. Responsible for all creative output and managing the creative process

Client Management

• Actively collaborate with Account department, and be willing to communicate with Clients in person as needed.

Strategy

• Provide helpful feedback to Strategy, and generate inspiring ideas in order to create even more high-quality works.

Creative Leadership

• Effectively transfer the message from Creative Committee to Creativity Team to ensure that all parties reach an agreement on how to achieve positive results and drive the performance of Ogilvy Creativity.
• Coordinate and manage creative resources reasonably to improve both effectiveness and efficiency.
• Review works monthly and quarterly, and report to CCO.
• Organize the team to participate in different national and international creative competitions, and report to CCO.
• Be passionate about innovative ideas, and encourage others to generate different ideas.
• Maintain the belief in being creative, and display the power of curiosity and creativity in daily life.
• Keep being patient, persistent and hopeful in pursuing the “Big Idea”.
• Earn respect and trust of colleagues.
• Ensure that creative ideas are executed in an exceptional way.
• Create a productive and “Big Idea” creative environment.
• Responsible for creative and effectiveness recognition at local and international awards competitions and new/existing business growth.

Leadership & People Management

• Be inspiring, encouraging and friendly to others, always work hard to make positive progress.
• Build trust and respect with others, provide training opportunities to ensure others’ development, and develop a team with professional ethics and effective performance.
• Take responsibility and keep commitments when facing huge challenges or mistakes.
• Provide different possible solutions to broaden horizons and achieve goals.
• Abide by the WPP Code of Business Conduct.
• Have cost management skills, and ensure that creative ideas can be executed.

Electrical and Control Design Engineer

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,000 - $4,500
Location: Woodlands

Interested applicants can also send your resume to

WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

The Singapore University of Technology and Design (SUTD) is looking for candidates with strong background in computer vision and deep learning.

Job Responsibilities

• Develop new algorithms for image and video analysis;
• Write research papers for top-tier conferences and journals;
• Write proposals and reports for research projects.

Applicants should have a PhD degree in computer science, software engineering, electronic engineering, or related disciplines.

RESPONSIBILITY
Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
Conduct in-depth analysis of factors influencing system performance.
Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
Perform software simulations of solar photovoltaic (PV) system performance & energy production
Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
Ensure compliance with EPC contract specifications and regulatory requirements mitigating risks and optimizing project outcomes including on-site engineering support.
Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE
Degree/Diploma in Electrical Engineering discipline 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS
Proactive self-starter with an ability to thrive in dynamic environments
Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
Collaborative team player and able to guide the drafting team.
Adaptability and willingness to embrace new technologies and methodologies
Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
Proficient in design software such as PV AutoCAD

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

ROLE:
IME is leading the effort to establish the industry leading Silicon Carbide R&D program. This program aims to advance 200mm Silicon Carbide technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The main objective is to drive disruptive innovations in power device research, with a specific focus on >1.2KV power MOSFETs. These innovations are intended to enhance automotive technologies, vehicle electrification, safety measures, sustainable energy grids, and industrial automation. Key aspects to demonstrate for this role include high power device design, novel device concepts, doping design, gate oxidation, and wide-bandgap process simulations. To achieve this, we are seeking individual with extensive industry experience in using Synopsys/Silvaco TCAD simulator, relevant device characterization skills, design simulation development abilities, a willingness to mentor junior staffs, and strong interpersonal skills. The candidate will contribute to the wide-bandgap & Silicon Carbide team by utilizing their device knowledge, guiding team on device characterization, implementing state-of-art Silicon Carbide power MOSFETs (Planar, Trench & Super-Junction), and innovative novel power MOSFETs for future applications.

RESPONSIBILITIES:

• TCAD modeling & simulation, novel high power device design, simulation, and device characterization

• Design and simulate high voltage Silicon Carbide MOSFETs (planar, trench, SJ MOSFET, IGBT) with a blocking voltage of >1.2K using Synopsys/Silvaco simulator

• Design & simulate practical and effective junction terminations

• Provide guidances on device structure, optimizing cell, power/performance analysis, process risk assessment, and recommendations for experimental split and improvement

• Develop and apply fundamental MOS device physics-based TCAD modelling & electric field management to calculate band structure, carrier transport, blocking voltage,
switching properties, and thermal management for vertical power devices in the presence of interface state density, gate oxide defects, and defects in Silicon Carbide

• Model transport and carrier scattering in devices operating in extreme ambient conditions

• Collaborate with diverse teams, including process integration, characterization, and circuit design engineers, to analyze and troubleshoot device-related issues during
development

• Serve as a resource for colleagues with less experience, and lead small projects with manageable risks and resource requirements

• Work closely with both internal and external customers to understand customer issues and align their demands. And grow this wide-bandgap team to ~5 headcounts in the
next 3 years.

JOB REQUIREMENTS:

• PhD in Electrical Engineering or related field

• >10 years industrial experience for high power device design and modeling

• Deep knowledge of high voltage, high power MOSFETs (including Planar, Trench, S-J MOSFETs, and IGBTs) design and device characterization on 4H-SiC & GaN substrates.

• Solid understanding of wide-bandgap semiconductor materials and the strong physics of MOSFET devices

• Ability to teach and transfer knowledge to junior staff members

• Ability to effectively communicate and plan with customers regarding their needs, issues, and demands

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Roles & Responsibility

-Content Creations for Social Media (Instagram, Facebook, Youtube, Website etc)

-Plan out social media content (graphics, videos, photography)

-Craft Marketing and Social Media campaigns and strategies

-Promote content on social networks and monitor engagement (e.g. comments and shares)

-Brainstorm ideas and creative ideas for daily content in the form of mainly images, but also video and articles

-Execution of content creation: shooting videos, photography etc.

-Other ad-hoc duties as assigned by the company

Requirement

-At least 1 year of experience in related field

-Preferably entry-level specialized in Graphic Design/ Photograghy/ Film Production/ Film, Sound and Video.

-Preferably skilled and experienced in handling operating camera

-Creative, independent, self-discipline and willing to learn

We are hiring Junior/Senior Interior Designers !

Drop us an email with your resume today!

Email: [email protected]

Responsibilities:

• understand homeowner requirement and propose space planning with layout and material
• draw in 2D CAD & 3D Sketch Up
• responsible to work out quotation
• responsible to supervise work progress and meet the timeline
• responsible to liaise with suppliers and subcontractors in order to have good quality works

Requirements:

• O level(Min), Diploma, Degree/Bachelor
• Min 1 years’ experience in interior design or construction project management or related experience
• Strong problem solving and analytical skills
• Able to converse in English and Mandarin(in order to handle queries and concerns from English and Chinese speaking counterparts in regards with the interior design related matters.)
• Creative, independent, self-discipline, willing to learn, love to talk to customer and meticulous
• Good communication and like to do presentation, able to meet client at weekend and public holidays

Why join us?

• SIDA Best Design Award Winner
• Singapore Good Design Award Winner
• Qanvast Top 3 Interior Design Firm
• SuperTrust Award Winner Interior Design Firm
• Well-Known Boutique Interior Design Firm
• New 3500sf Design Show Room
• Plenty of opportunities to grow as a pioneer in our company
• Salary based or Profit sharing based

Working Location: Alexandra Technopark

Working Hours: Mon - Fri, 9am to 6pm

Salary: Up to $5000/month

Duties

To perform day to day accounting and administration functions to ensure proper internal controls, compliance to local government/ company policies & requirements, implementing efficient finance and accounting procedures for the country. In addition, this role is required to provide accurate status reports to organization management.

• Performs daily accounting (AR, AP, cargo, payroll, reconciliation, budgeting) and administration (statutory reporting, treasury/cash forecasting, facility management) functions in country
• Coordinate/oversee processing of internal and external customer requests and inquires
• Monitor production performance to identify problem areas and adherence to schedules; takes corrective action where necessary to minimize losses or enhance profitability/efficiency
• Performs monthly closing within required deadline.

Required

• Diploma in Finance or Accounting
• Two years in Retail/Hospitality or related experience required
• Excellent communicator
• Analytical skills
• Bilingual in English and Mandarin to liaise with mandarin speaking counterparts (written and oral)
• Knowledge of local tax laws and regulations
• Reliable, punctual attendance is an essential function of the position

-Have a good knowledge of the new social Platforms and ensure that the Club is constantly up to date

-Maintain and not exceed a show marketing budget

-Create marketing plan

-Schedule and oversee creative for Email blast/ecards

-Foster relations with media (radio/TV/online/print/nontraditional)

-Develop an actionable paid and organic social media strategy that focuses on direct response, loyalty, engagement, membership, and new customer acquisition

-Work with Agents/managers on ad approvals

-Administrative duties including work orders, invoices

-Ensure proper allocation of marketing funds to deliver best ROI on marketing objectives.

-Work with retailers and strategic partners to ensure strong brand visibility & increased traffic