Monthly Payment: Attractive Incentive Scheme + High % Commission

Responsibilities:

• Determine the houseowner’s goals and requirements of the renovation project.
• Consider how the space will be used and how people will move through the space.
• Prepare presentation proposal/quotation/contract via system or software.
• Create a timeline for the renovation project and tabulate profitable project earning against project cost.
• Liaise with sub-con/supplier for material(s) order and work(s) arrangement.
• Visit project site to ensure the progress in good condition.
• Fulfill the necessary processes to ensure the complete handover to houseowner before submission of close project.
• Assist Team Director in ad-hoc duties.

Requirements:

• No prior experience in Interior Design needed. Training will be provided.
• Possess good communication and interpersonal skills.
• Must be positive and motivated.
• Must be sales oriented.

We have an exciting position in the explosive growth area of Data Center Enterprise Storage. In this role you will be responsible for developing the most advanced semiconductor devices to support stringent high capacity storage needs across all the top tier service providers. Our IC R&D team is looking for an experienced physical design engineer to develop high speed custom analog/mixed signal products for the storage industry. A qualified applicant would work closely with circuit design engineers to lay out high-speed custom analog designs and develop mask layouts for customer products, as well as printed circuit board designs. You will join a cross-functional team responsible for developing leading edge high-speed custom IC products that ultimately achieve high volume production.

Job Responsibilities

• Lay out high speed, high performance analog/mixed-signal custom integrated circuits
• Work directly with a team of engineers to determine floor plan, routing and I/O requirements
• Perform IC design rule and connectivity verification and drive products through mask release flows.
• Contribute to methodology improvements to increase layout and verification efficiency.
• Create reticle layouts, documentation, and PO’s to release products for mask build.
• Complete PCB layouts for test hardware.

Requirements/Qualifications:

• Bachelor's degree in Electrical Engineering (or related field)
• Minimum 8 years experience in custom analog IC physical design
• Experience with schematic-driven layout, floor planning, chip level routing, design for manufacturing and design rule and connectivity verification is preferred
• Experience using Cadence Virtuoso XL preferred
• Experience with Cadence Allegro for PCB layout preferred
• Familiarity with both analog and digital layout tools and flows, circuit design concepts and IC manufacturing processes desired
• Strong communication skills, proficiency in both oral and written English
• Understanding of silicon process technologies (CMOS and Bipolar) and device physics would be a plus
• Proven analytical skills (application of math and physics to solve problems)
• Must be meticulous and demonstrate attention to detail.

Position Overview:

We are seeking a skilled Senior Physical Design Engineer to join our team. As a Senior Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Lead the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.
• Mentor junior engineers and provide technical guidance and support as needed.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 3-5 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Able to guide junior colleague when needed.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the Physical Design process, supporting RTL to GDS implementation for semiconductor chips.
• Aid in achieving block-level timing closure by assisting with Design constraints optimization and timing analysis.
• Participate in formal checks to ensure designs meet functional and timing requirements.
• Assist with low-power checks and contribute to power consumption analysis for power efficiency optimization.
• Collaborate with the Design team to implement UPF (Unified power Format) for power management and control.
• Support block-level Place and Route (APR), Static timing analysis (STA), and other Physical Design tasks under supervision.
• Contribute to script development in Tcl, Perl, or Python for Design automation and flow enhancement.

Qualification/ Requirements:

• Bachelor’s degree in electrical engineering, Computer Engineering, or a related field.
• Minimum 1 year of experience in physical design for semiconductor chips.
• Basic understanding of RTL-to-GDS flow, timing closure, low-power design, and power analysis concepts.
• Familiarity with scripting languages such as Tcl, Perl, or Python is a plus.

Good Pay + Good Bonus ( 5 Days Work Week )

Junior / Entry Level / No experience / Senior Welcome apply / Full Training Provided

Work location : Woodlands & Bedok ( X2 Role )

JOB SCOPE
1.0 Design, test, debug and commission the company’s product, which include jigs and
fixtures, customized semi and fully automatic machines.
2.0 Attend meetings with customers to discuss on their requirements in new projects
and/or project proposals.
3.0 Research and develop new ideas and concept to enhance company’s performance and
competitiveness in the field of industrial automation.

Requirements
1.0 Minimum ITE, Diploma or Degree in Mechanical Engineering
2.0 Minimum two years experience in customized Automation Machine Design.
3.0 Experience in customized semi-con/ connector/ machine design preferred.

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

RESPONSIBILITIES AND DUTIES
As a Service Crew, you will work with your Team Members to deliver a high-quality service experience that exceeds customer expectations:

· Welcoming guests according to company standards in a timely, friendly and efficient manner

· Ensure cleanliness and hygiene of the room and keeping the environment tidy at all times

· Able to perform duties like taking food and drink orders, cashiering and any other ad hoc duties from time to time.

· Maintain cleanliness and housekeeping of work areas

· Ensure that guests received attention at all times

· Building and maintaining good rapport with the guest

· Manage and deliver/serve drinks/food

· Perform general basic service

· Establish rapport with guests to build loyal and satisfied customers

QUALIFICATIONS AND SKILLS

· Able to communicate in English/Mandarin

· Minimum O-level education

· Outgoing, presentable and service-oriented

· Cheerful, independent and self-motivated

· Able to work shifts, weekends and public holiday

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements:

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information:

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

My client is a well established local multidisciplinary consulting firm in Singapore.

Location : Central Area

Key Responsibilities:

• Design and implementation of civil and structural engineering solutions across a diverse range of projects, including commercial, residential, mixed-use developments, and infrastructure.
• Coordinate with architects, clients, and project stakeholders to ensure design objectives are met.
• Oversee technical project delivery, including design calculations, specifications, and ensuring compliance with local standards (Eurocodes, Singapore Codes of Practice).
• Provide technical guidance and leadership to junior engineers and drafters, ensuring design integrity and quality control.
• Conduct feasibility studies, risk assessments, and cost analysis for structural components.
• Collaborate with interdisciplinary teams to ensure the integration of innovative and sustainable engineering practices.
• Liaise with regulatory authorities for necessary approvals, ensuring designs are aligned with statutory requirements.
• Attend meetings with relevant parties to resolve technical issues.

Requirements:

• Bachelor’s Degree in Civil or Structural Engineering from a PEB recognized university.
• Minimum of 3 years of relevant design experience in Singapore.
• Proficiency in structural analysis and design software (e.g., ETABS, SAFE, STAAD, SAP2000).
• Strong knowledge of Singapore design codes and local authority submission procedures.
• Demonstrated ability to handle multiple projects and deliver within tight timelines.
• Excellent communication and interpersonal skills, with the ability to work effectively within multidisciplinary teams.
• Strong problem-solving skills.
• With experiences in HDB projects.

Overview: -

• Monthly Salary: Up to $3500 + AWB + Bonus (depend on EXP)
• Location: Loyang, Pasir Ris
• 5 Days (Monday to Friday), Office Hours

Your Responsibilities: -

• Develop, document, and support the creation of high-precision plastic injection molds and components for manufacturing.
• Assist the Program team during the initial project quotation phase by providing accurate tooling and product DFM (Design for Manufacturability) that aligns with quality standards.
• Engage with customers for DFM and mold concept reviews to ensure their technical requirements and concerns are properly addressed.
• Support the Tooling Department by conducting internal tooling design and DFM reviews prior to tool launch.

You will need: -

• Previous experience or knowledge in Precision Tooling Design/Fabrication, Micro Plastic Injection Molding, or Manufacturing Process Engineering is preferred.
• Proficiency in 3D CAD software, specifically Siemens UG NX or PTC Creo 4.0 and above.

For interested applicants, kindly click "Apply Now"

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Responsibilities:

• Prepare reports, designs and drawings.
• Make calculations about pressures, loads and stresses.
• Consider the strength of construction materials and select appropriately.
• Provide technical advice on safe designs and construction.
• Obtain planning and/or building regulations approval.
• Analyze configurations of the basic components of a structure.
• Monitor and inspect all work undertaken by contractors to ensure structural soundness.
• Inspect properties to evaluate the conditions and foundations.
• Use computer aided design technology for simulation purposes.

Requirements:

• Degree in Civil or Structural Engineering
• Professionally registered with the Institute of Structural Engineers.
• Expert experience in project management.
• Advanced knowledge of construction methods, materials and legal regulations.
• Sound understanding of physics and mathematics.
• Ability to liaise with professionals from other disciplines.
• Meticulous attention to detail with the superb organizational skills.
• Ability to work under pressure and meet tight deadlines.
• Excellent communication and IT skills.

The Opportunity:

• Location: Kent Ridge
• Duration: 6 months, 6 hours per day
• Work arrangement: Hybrid
• Salary: $20/hr

Job Description:

• Implement communication strategies for marketing campaigns at the centers, enhancing engagement across our social media and digital platforms.
• Primarily responsible for content on websites and social media channels including creating and writing copy for videos, visuals, and other multimedia content.
• Collaborate with stakeholders to design graphics for both digital and print media.
• Manage design projects from inception to completion, guaranteeing timely delivery and high-quality standards.
• Assist in coordinating various events, such as conferences, webinars, and workshops.
• Support logistical aspects of events, including vendor coordination, attendee registration, catering, and equipment setup.
• Supervise event execution, including on-site coordination, speaker management, and post-event promotion.

Requirements:

• Diploma/Degree in Mass Communications, Design or equivalent
• No experience is welcome to apply as training is provided
• Proficient in MS Office, Photoshop and Illustrator.
• Possess good writing and communication skills.

Next Step:

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package
• Simply click on 'Apply here' to drop your resume or send your resume to [email protected].
• Only shortlisted candidates will be contacted

Amanda Lee
Direct Line: 6697 7964
EA License No: 91C2918
Personnel Registration Number: R1873465

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Meeting with clients and other involved professionals at an early stage to agree on the project brief;
• Developing project briefs and working on these as the project progresses;
• Preparing design proposals using computer-aided design (CAD) and traditional drawing methods;
• Contributing to planning applications and other regulatory application procedures;
• Understanding how the design aspects of a construction project influence and relate to performance and functional issues, so that practical questions can be addressed at an early stage;
• Following up with the detailed design process and co-ordinating design information;
• Liaising with appropriate authorities (e.g. Planning enquiries and technical officers) to obtain statutory approval;
• Co-ordinating and liaising with the various consultants on the project team;
• Advising clients on procuring the best and most appropriate contracts for the work they are undertaking;
• Leading the preparation of tender documentation and construction drawings;
• Assisting in administering contracts and project certifications;
• Obtaining feedback on work in progress and finished results from clients;
• Making site visits to check on progress and ensuring that the project is running within the agreed timescale;
• Solving problems that might occur during building/construction stage;
• Carrying out defect inspections;
• Managing the work of junior staff/direct reports.

Job Requirements

• Minimum 3 years experience in the architectural industry in Singapore or Malaysia
• Able to work within a team and in a fast-paced environment
  Familiar with building regulations (Singapore or Malaysia)
• Strong Portfolio
• Good working attitude, proactive and conscientious.

Please send your CV & portfolio to [email protected] if you are interested in the position. Thank you!

• Meeting with clients and other involved professionals at an early stage to agree on the project brief;
• Developing project briefs and working on these as the project progresses;
• Preparing design proposals using computer-aided design (CAD) and traditional drawing methods;
• Contributing to planning applications and other regulatory application procedures;
• Understanding how the design aspects of a construction project influence and relate to performance and functional issues, so that practical questions can be addressed at an early stage;
• Following up with the detailed design process and co-ordinating design information;
• Liaising with appropriate authorities (e.g. Planning enquiries and technical officers) to obtain statutory approval;
• Co-ordinating and liaising with the various consultants on the project team;
• Advising clients on procuring the best and most appropriate contracts for the work they are undertaking;
• Leading the preparation of tender documentation and construction drawings;
• Assisting in administering contracts and project certifications;
• Obtaining feedback on work in progress and finished results from clients;
• Making site visits to check on progress and ensuring that the project is running within the agreed timescale;
• Solving problems that might occur during building/construction stage;
• Carrying out defect inspections;
• Managing the work of junior staff/direct reports.

Job Requirements

• Minimum 3 years experience in the architectural industry in Singapore or Malaysia
• Able to work within a team and in a fast-paced environment
  Familiar with building regulations (Singapore or Malaysia)
• Strong Portfolio
• Good working attitude, proactive and conscientious.

Please send your CV & portfolio to [email protected] if you are interested in the position. Thank you!

• Meeting with clients and other involved professionals at an early stage to agree on the project brief;
• Developing project briefs and working on these as the project progresses;
• Preparing design proposals using computer-aided design (CAD) and traditional drawing methods;
• Contributing to planning applications and other regulatory application procedures;
• Understanding how the design aspects of a construction project influence and relate to performance and functional issues, so that practical questions can be addressed at an early stage;
• Following up with the detailed design process and co-ordinating design information;
• Liaising with appropriate authorities (e.g. Planning enquiries and technical officers) to obtain statutory approval;
• Co-ordinating and liaising with the various consultants on the project team;
• Advising clients on procuring the best and most appropriate contracts for the work they are undertaking;
• Leading the preparation of tender documentation and construction drawings;
• Assisting in administering contracts and project certifications;
• Obtaining feedback on work in progress and finished results from clients;
• Making site visits to check on progress and ensuring that the project is running within the agreed timescale;
• Solving problems that might occur during building/construction stage;
• Carrying out defect inspections;
• Managing the work of junior staff/direct reports.

Job Requirements

• Minimum 3 years experience in the architectural industry in Singapore or Malaysia
• Able to work within a team and in a fast-paced environment
  Familiar with building regulations (Singapore or Malaysia)
• Strong Portfolio
• Good working attitude, proactive and conscientious.

Please send your CV & portfolio to [email protected] if you are interested in the position. Thank you!

• Meeting with clients and other involved professionals at an early stage to agree on the project brief;
• Developing project briefs and working on these as the project progresses;
• Preparing design proposals using computer-aided design (CAD) and traditional drawing methods;
• Contributing to planning applications and other regulatory application procedures;
• Understanding how the design aspects of a construction project influence and relate to performance and functional issues, so that practical questions can be addressed at an early stage;
• Following up with the detailed design process and co-ordinating design information;
• Liaising with appropriate authorities (e.g. Planning enquiries and technical officers) to obtain statutory approval;
• Co-ordinating and liaising with the various consultants on the project team;
• Advising clients on procuring the best and most appropriate contracts for the work they are undertaking;
• Leading the preparation of tender documentation and construction drawings;
• Assisting in administering contracts and project certifications;
• Obtaining feedback on work in progress and finished results from clients;
• Making site visits to check on progress and ensuring that the project is running within the agreed timescale;
• Solving problems that might occur during building/construction stage;
• Carrying out defect inspections;
• Managing the work of junior staff/direct reports.

Job Requirements

• Minimum 5 years experience in the architectural industry in Singapore or Malaysia
• Able to work within a team and in a fast-paced environment
  Familiar with building regulations (Singapore or Malaysia)
• Strong Portfolio
• Good working attitude, proactive and conscientious.

Please send your CV & portfolio to [email protected] if you are interested in the position. Thank you!

• Meeting with clients and other involved professionals at an early stage to agree on the project brief;
• Developing project briefs and working on these as the project progresses;
• Preparing design proposals using computer-aided design (CAD) and traditional drawing methods;
• Contributing to planning applications and other regulatory application procedures;
• Understanding how the design aspects of a construction project influence and relate to performance and functional issues, so that practical questions can be addressed at an early stage;
• Following up with the detailed design process and co-ordinating design information;
• Liaising with appropriate authorities (e.g. Planning enquiries and technical officers) to obtain statutory approval;
• Co-ordinating and liaising with the various consultants on the project team;
• Advising clients on procuring the best and most appropriate contracts for the work they are undertaking;
• Leading the preparation of tender documentation and construction drawings;
• Assisting in administering contracts and project certifications;
• Obtaining feedback on work in progress and finished results from clients;
• Making site visits to check on progress and ensuring that the project is running within the agreed timescale;
• Solving problems that might occur during building/construction stage;
• Carrying out defect inspections;
• Managing the work of junior staff/direct reports.

Job Requirements

• Minimum 5 years experience in the architectural industry in Singapore or Malaysia
• Able to work within a team and in a fast-paced environment
  Familiar with building regulations (Singapore or Malaysia)
• Strong Portfolio
• Good working attitude, proactive and conscientious.

Please send your CV & portfolio to [email protected] if you are interested in the position. Thank you!

ABOUT THE ROLE

As a Graphic Design Strategist in the User Growth team for Elfie, you will be responsible for creating visually compelling and user-friendly designs that make health monitoring accessible and engaging. The role ensures Elfie’s value proposition is presented in a format that encourages users to actively onboard with Elfie and participate in managing their chronic conditions. By creating visually appealing and accessible designs across various marketing materials, you contribute significantly towards Elfie’s north star: maximising global health impact.

WHAT WE OFFER

• A permanent global contract, with fiercely competitive salary
• Comprehensive private healthcare support from day one
• Individualised career progression and development framework
• Hybrid working - 3 days in our co-working office in Singapore
• 14 days PTO, plus national holidays off
• Performance-related bonus paid twice a year; April and October
• Brand new MacBook and associated tech on day one
• An inclusive culture where everybody in the business has direct impact

WHAT YOU WILL DO

• Develop visual concepts for user acquisition campaigns tailored to various markets, demographics and therapeutic areas, ensuring cultural appropriateness and engagement.
• Create static and motion graphics and video content for various platforms, adapting styles and formats to suit different audience preferences and
  technical requirements.
• Design and produce finalized assets for multiple channels, adhering to brand guidelines, healthcare industry standards, and local market nuances.
• Collaborate closely with cross-functional teams to create effective visual solutions. Collaborate with UX/UI designers to ensure marketing assets align with the app's interface and overall user experience.
• Conduct A/B testing on creatives and concepts, analyze performance metrics, and stay informed about industry trends.
• Participate in regular team meetings and campaign performance reviews, presenting design concepts and rationales to stakeholders and incorporating feedback into final designs.

WHAT YOU WILL NEED

• Over 5 years of experience in graphic design for marketing across multiple markets, including at least 2 years with an app-based company.
• Proven skills in design thinking methodologies, with a focus on creating static and motion ads, editing video content, creating UI videos for digital advertising.
• Proficient in Adobe Suite (Photoshop, InDesign, Illustrator, AfterEffect, Premiere Pro), Figma, and relevant 2D/3D software.
• Strong understanding of design principles such as typography, layout, and color theory, with the ability to produce positive sentiments materials that challenge industry norms in health advertising.
• Excellent communication and collaboration skills, demonstrating leadership while managing diverse requirements, and capable of thriving in a fast-paced environment, both independently and collaboratively.

WHY JOIN US?

• Strong and genuinely patient-focused company mission (see below)
• Truly global start-up with a blend of diverse cultures and backgrounds
• Excellent financial credibility and refreshingly clear future vision
• Phenomenal growth plans and an excellent company spirit
• Regular social events; our football team "Elfie FC" is taking Saigon by storm!
• Dedicated career pathways and training to support your development
• Experienced founders with 20+ years experience in digital health, software, and partnership development in both bluechip and start-up companies - and successful previous exits!

ABOUT ELFIE

Elfie is the first completely free, gamified mobile app that rewards users for monitoring their health. Our vision is to become the world's largest self-reported medical record platform, supporting all therapeutic areas in a single, gamified, and free app for maximum impact.

We have a footprint in 7 countries (Brazil, France, United Kingdom, Turkey, Egypt, Hong Kong, Singapore, and Vietnam), growing to 12 by the end of 2024 and 25 by the end of 2025.

How do we monetize?

We have 2 independent yet synergic business models:

1. Pharmaceutical companies: Elfie's free application is sponsored by pharmaceutical companies, who need to drive treatment adherence and access anonymized real-world data. Pharmaceutical companies cover our company operational costs and the promotion of the application.
2. Insurers and employers: Elfie premium version (aka ElfieWorks) is an employee health program sponsored by employers and insurers. These companies need employees to stay in good health and engaged to increase productivity and keep ever-increasing healthcare costs under control. ElfieWorks is designed and distributed in partnership with a global insurance broker and partner insurers.

What is our culture?

We have one single NorthStar at Elfie: maximising global health impact. It is a measurable KPI that is a function of the number of lives impacted and the level of impact on each individual. Everybody's KPIs across all departments are aligned with this. All our partnerships and revenue streams are also aligned with this.

We have 4 values:

• Patient-first: Whatever goes against our North Star (maximising patient health impact) is eliminated, all ideas and projects are prioritised accordingly.

• Think big: We don’t allow our fears and unknowns to limit our ambition and solutions.

• Take ownership: We are not tasked to execute a process but responsible to find a scalable solution.

• Resilience: We don’t allow challenges and setbacks to lower our motivation and commitment to our mission, regardless of the personal discomfort it means.

Check out the Elfie app (downloadable from any geo-location).

for Android: https://links.elfie.co/apptester

for iOS: https://links.elfie.co/testflight-i

WHAT NOW?

Apply today for immediate consideration! Know someone who would be a good fit for this role? We’re offering a monetary reward if you refer them to us and they are successful! Contact the Talent Acquisition team for more information through the chat feature on our careers site!

JOB SCOPE

(Design Engineer)

1.0 Design, test, debug and commission the company’s product, which include jigs and fixtures, customized semi and fully automatic machines.

2.0 Attend meetings with customers to discuss on their requirements in new projects and/or project proposals.

3.0 Research and develop new ideas and concept to enhance company’s performance and competitiveness in the field of industrial automation.

4.0 Procure and/or assist in the procurement of necessary items to enable the performance of above duties.

Requirements

1.0 Minimum ITE, Diploma or Degree in Mechanical Engineering

2.0 Minimum two years experience in customized Automation Machine Design.

3.0 Experience in customized semi-con/ connector/ machine design preferred.

4.0 Knowledge in Solidworks preferred, familiar with Pro-E and Inventor added advantage.

5.0 Intuitive in mechanical movement, function and performance. Good perception of 2D & 3D objects.

6.0 Understand machining processes well.

7.0 Intrinsic desire and passion to design high performance machines.

8.0 Able to perform work under relatively stressful environment Others

Job Description

• Industry/ Organization Type: Manufacturing/Electronic Components and Boards
• Position Title: Automation Design Engineer (Based at Bintan)
• Working Location: Bintan
• Working Hours: Mon – Fri (8 am – 5 pm)
• Salary: Basic up to $4500 + Overseas Allowance + Variable Bonus (Expat Package)
• Duration: Permanent

Key Responsibilities

• Design and develop innovative automated machines to meet specific manufacturing requirements.
• Plan and execute automation and equipment systems design to optimize machine efficiency and reliability.
• Explore and implement strategies to enhance machine performance, particularly in cycle time and production output.

APPLY NOW!!!

• Degree in Mechanical Engineering or its equivalent.
• Preferably more than 2 years of experience in machine design and development within the Electronics industry.
• Experience in managing turn-key projects.
• Excellent working knowledge in Solidworks application.
• Demonstrated creativity in machine design.
• Strong team player who is self-driven and results-oriented.
• Willing to be posted to Bintan, Indonesia.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65867 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

Company: Machinery

Location: Tuas West Road (Company Transportation provided)

Position: Engineering Manager (Job ID: 19314)

Job Description:

• Key responsibilities for this role include being involved in various project stages which include basic engineering design and detailed design, site and technology assessment, technical consultation.
• Is also tasked to manage the budget, schedules and quality. To oversee the delivery and use of materials, tools, and equipment, and the quality of construction, staff productivity, and safety.
• The candidate will lead and collaborate with the design and engineering team to deliver on key responsibilities in an assignment under tight deadlines.
• Engineering projects management through structured planning, ensuring set timelines, budgets and resource allocation for successful execution.
• Cultivate and maintain strong client relationships, ensuring satisfaction with project deliverables.
• Act as the primary point of contact with clients in addressing and resolving issues and managing expectations.
• To lead engineering team and engineers assigned, adhering to quality standards, codes and project requirements.
• Coordination and engagements with vendors and OEMs to specify technical specifications and data sheets.
• To ensure that works are carried out according to specifications, drawings without compromising on quality and safety.
• Provide technical expertise in designs, ensuring adherence to industry standards, codes and regulations.
• Review and approve design documents, drawings, and specifications.
• Collaborate with multi-disciplinary design teams to optimize solutions and address technical challenges.
• Preparation of Technical specifications and Package P&IDs for all the mechanical equipment.
• Prepare and review/check of the design Interfaces with other disciplines and Packages.
• Develop and maintain engineering standards, specifications, and best practices for the designs.
• Review of vendor offers, preparation of technical evaluation report, technical portion of the purchase order.
• Review and Input drawing/document list for package, design review and validation records, Bill of quantities, Vendor drawing review.
• Provide technical support and guidance to engineering and project team.
• Proactive in continuous improvement for engineering processes.

Job Requirements:

• Bachelor’s degree in Mechanical Engineering or related field
• At least 15 years of experience in the field of plant engineering design and construction experience in petrochemical, chemical and industrial plants. Consistent career experience in the engineering department.
• Experience in the design of engineering systems and equipment including boilers, turbines, compressors, pumps, and heat exchangers.
• Track record of successfully delivering chemical & industrial projects on time and within budget.
• Proficiency in MS Office and engineering software tools such as Smartplant 3D, Caesar II or similar plant engineering tool and AutoCAD.
• Strong knowledge of industrial plant design principles, process and operation philosophy
• Well-verse with industry standards and best practices for design, maintenance, and reliability.
• Excellent problem-solving skills and ability to work effectively in cross-functional teams.
• Effective communication and interpersonal skills, with the ability to work collaboratively in a multidisciplinary team environment and with the Clients and Stakeholders.

Interested applicants please send your resume to jingling at pasona.com.sg with email subject header "Job Application for Engineering Manager (Job ID: 19314)".

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.
http://www.pasona.com.sg/privacy.html

Tan Jing Ling

EA Registration No: R24124404
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
Direct: +65 6239-4223 | General: +65 6732-6933 | Fax: +65 6733-2761
Email: [email protected]

URL: www.pasona.com.sg

EA License No:90C4069

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements:

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information:

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Company: Machinery

Location: Tuas West Road (Company Transportation provided)

Position: Project Manager (Job ID: 19317)

Job Description:

• Key responsibilities for this role include being involved in various project stages which include designing the solution, site and technology assessment, and technical consultations.
• Also tasked to manage the budget, schedules and quality. To oversee the delivery and use of materials, tools, and equipment, and the quality of construction, staff productivity, and safety.
• Put under control several ongoing projects at the same time.
• Engage in plant operations and maintenance work, with a proven track record of leading projects (civil, mechanical, electrometric, maintenance work, etc.).
• Engage and establish close relationship with their clients and to search for new opportunities for further businesses.
• Manage the department and give supports to other teams.
• Other ad hoc duties if assigned by managements.
• Coordination and engagements with vendors and OEMs to specify technical specifications and data sheets.
• To ensure that works are carried out according to specifications, drawings without compromising on quality and safety.

Job Requirements:

• Bachelor’s degree in Mechanical Engineering or related field
• Minimum 10 years of experience in the field of plant engineering design and construction experience in petrochemical, chemical and industrial plants. Consistent career experience in the engineering department.
• Experience in the design of engineering systems and equipment including boilers, turbines, compressors, pumps, and heat exchangers.
• Track record of successfully delivering chemical & industrial projects on time and within budget.
• Proficiency in MS Office and engineering software tools such as Smartplant 3D, Caesar II or similar plant engineering tool and AutoCAD.
• Strong knowledge of industrial plant design principles, process and operation philosophy
• Well-verse with industry standards and best practices for design, maintenance, and reliability.
• Excellent problem-solving skills and ability to work effectively in cross-functional teams.
• Effective communication and interpersonal skills, with the ability to work collaboratively in a multidisciplinary team environment and with the Clients and Stakeholders.

Interested applicants please send your resume to jingling at pasona.com.sg with email subject header "Job Application for Project Manager (Job ID: 19317)".

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.
http://www.pasona.com.sg/privacy.html

Tan Jing Ling

EA Registration No: R24124404
Pasona Singapore Pte Ltd
1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246
Direct: +65 6239-4223 | General: +65 6732-6933 | Fax: +65 6733-2761
Email: [email protected]

URL: www.pasona.com.sg

EA License No:90C4069