Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

• Position: Sales Interior Designer
• Bendemeer
• WFH basis, Report to office once a week
• Basic $1500 + commission, Gross up to $4000 - $7000

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Requirements:

• Diploma in Interior Design
• Minimum 1 years of experience as a Sales Interior Designer
• Entry level are welcomed
• Strong understanding of design principles, space planning, and 3D visualisation software
• Familiar with software – Autocad / 3D Max / Sketch Up / Microsoft Office

Job scope:

• Provide expert interior design consultations and presentations to prospective clients
• Collaborate with clients to understand their design requirements and translate them into innovative and functional interior solutions
• Develop detailed design concepts, mood boards, and 3D visualisations to bring clients' visions to life
• Manage the end-to-end project lifecycle, from initial client meetings to final installations
• Work closely with the project management team to ensure timely and successful project delivery
• Attend site visits and liaise with contractors to oversee the implementation of design plans
• Stay up-to-date with the latest interior design trends, materials, and industry best practices

Job Description

1. Perform on stage in front of a live audience.

2. Express emotion and present ideas through body movement, spoken language, facial expression, and action.

3. Attend rehearsals and confer with other band members.

4. Work with the music director to fine-tune the performance.

5. Arrange for musical instruments or props to arrive at gigs.

6. Interpret criticism from directors.

7. Memorize lines or musical notes.

Job Requirements

1. Talented and Creative – well-versed in a range of styles and have the ability to connect with various audiences through rhythm and melody, able to adjust actions in relation to audiences’ actions, resulting in attracting more customers to the club

2. Knowledgeable – Able to sing many songs to entertain audiences

3. Communicate well with the audiences/customers and colleagues

4. Dance well on the stage

5. Must be prepared to work during weekends and public holidays

Job Responsibilities:

• Conduct site survey and prepare the drawing as per project requirements that complies to the SCDF regulations
• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc
• Prepare economics analysis, proposal and tender documents for submission
• Liaise with vendors/suppliers for price lists and up-to-date product and service information with the procurement team
• Familiarize yourself with Authority requirement and IEC standard or equivalent for renewable system installation)
• Coordinate closely with client site personnels and safety coordinators
• Liaise with other teams to gather feedback on design and costing for continuous improvement
• Produce design drawings like SLD, Panel and String Layout using AutoCAD software
• Ad hoc task assigned by the reporting officer
  

Job Requirements:

• Minimum Degree in Electrical Engineering/Renewable energy-related field is preferred
• Well versed with Autocad is a must. Familiar with PVSyst and Sketchup is a preferred
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectivel
• At least 1-2 years prior experience preferred but not required
• Knowledge in electrical design and solar engineering
• Driven, high energy individual who strives for success
• Strong technical understanding and troubleshooting skills
• Quick learner, goal-oriented team player with strong communication
• Interest in renewable energy and sustainability is a plus

about the role

· Develop and lead the design of end-to-end cloud architectures that are scalable, secure, and aligned with business objectives.

· Provide technical guidance and mentorship to solution architects, cloud engineers, and other technical teams.

· Collaborate with business leaders, development teams, and IT operations to gather requirements, define cloud strategies, and ensure successful delivery.

· Develop and maintain cloud technology roadmaps to support enterprise scalability, availability, and cost optimization.

Skills and experience required

· Bachelor’s degree in Computer Science or equivalent

• Minimum 8 years of experience in IT, with at least 5 years in cloud solution architecture across major cloud platforms (AWS, Azure, GCP).
• Proven experience in designing and delivering enterprise-level cloud solutions for complex systems.
• Strong understanding of cloud-native architecture, microservices, serverless computing, and containerization (e.g., Kubernetes, Docker).
• Expertise in Infrastructure as Code (IaC) tools such as Terraform, CloudFormation, or ARM templates.
• Solid knowledge of security frameworks, identity and access management (IAM), and compliance standards.
• Strong stakeholder management and communication skills, with the ability to convey technical concepts to non-technical audiences.

To apply online please use the apply function, alternatively you may contact Chloe Chen at chloe.chen(@)randstad.com.sg. (EA: 94C3609 /R1768253)

Responsibilities

1. Brainstorm and develop creative ideas and concepts for various design projects.
2. Conceptualize and develop visual assets for marketing collaterals that explain and visualize the company’s initiatives and projects.
3. Translate data, statistics, or information into visually compelling and easy-to-understand infographics, especially for socials.
4. Create visually appealing layouts, icons, and illustrations to support the infographic's message and theme.
5. Collaborate with content creators to grasp complex ideas and transform them into visual representations.
6. Collect relevant data and information to be used in infographics, ensuring accuracy and credibility.
7. Adhere to brand guidelines and maintain consistency in design elements.
8. Utilize graphic design software (e.g., Adobe Illustrator, Photoshop, Canva) and data visualization tools (e.g., Tableau, Infogram).
9. Craft a narrative within the infographic, guiding viewers through the information in a logical sequence.
10. Manage multiple projects and meet deadlines while maintaining quality.
11. Ensure proper bookkeeping of artwork assets for easy retrieval.
12. Keep up with design trends, data visualization techniques, and industry best practices.

Requirements

1. Diploma in graphic design, visual communication, information design, or a related field is typically preferred.
2. Minimum one (1) to two (2) years of working experience in related profession.
3. Proficiency in graphic design software such as Adobe Creative Suite (Illustrator, Photoshop, InDesign) is essential. Proficiency in motion graphics and animation techniques skills is a plus.
4. Strong creative and artistic skills to conceptualize and design unique infographics.
5. Excellent verbal and written communication skills to collaborate with team members and clients.
6. A strong understanding and interest in social media trends to know what artworks are fitting on various social media platforms.
7. A keen eye for detail to ensure accuracy in data representation and design elements.
8. Ability to work fast pace, manage multiple projects simultaneously, and meet deadlines.
9. A commitment to staying updated on design trends, software updates, and data visualization techniques.

Benefits

• Conducive and Friendly working environment
• Great Career Progression
• Annual Leave up to 21 days
• Festive Leave up to 3 days
• Work From Home Leave
• Medical & insurance benefit
• Birthday Leave and Voucher
• Smart Casual Dress Code

Other Information

• Working Location: Toa Payoh (HDB Hub near Toa Payoh MRT Station)
• 5-day work week, Mondays to Fridays: 9.00am to 6.00pm

Interested candidates are invited to submit a comprehensive resume, stating the current and expected salary and date of availability.

We regret that only shortlisted applicants will be notified.

Job Summary:

HR Assistant provides administrative support to the HR department and assists with various HR functions. This role includes maintaining employee records, assisting with recruitment, coordinating training sessions, and ensuring smooth daily HR operations.

Key Responsibilities:

1. Administrative Support:

- Assist in handling general HR-related inquiries from employees.

- Assist in drafting and maintaining HR policies and documents.

- Maintain the HR filing system, ensuring confidentiality.

2. Recruitment Assistance:

- Post job advertisements on various platforms.

- Schedule interviews and coordinate communication with candidates.

- Assist in onboarding new hires by preparing documents and orientation materials.

3. Employee Records and Data Management:

- Maintain and update employee records in the HR database.

- Track attendance, leaves, and benefits records.

- Prepare reports related to HR metrics.

4. Training and Development Coordination:

- Assist in planning and organizing training sessions or workshops.

- Monitor training schedules and attendance.

5. Event Support:

- Support HR-led events, such as team-building activities or wellness programs.

6. General HR Assistance:

- Provide support for payroll preparation and other HR projects.

- Assist with any ad hoc tasks as directed by the HR Manager.

Requirements:

- Diploma or degree in Human Resources, Business Administration, or a related field.

- Strong organizational skills with attention to detail.

- Good communication and interpersonal skills.

- Proficiency in Japanese or Chinese is a plus, as this role may involve liaising with international clients or stakeholders.

JOB DESCRIPTION

Job Title

Azure Virtual Desktop - Architect Implementation

Occupation

INFRASTRUCTURE ARCHITECT

Job Description & Requirements

About the Client:

Our client is a leading Information Technology (IT), consulting, and business process services company.

Responsibilities:

• Design and implement scalable, resilient, and secure cloud architectures on Microsoft Azure based on best practices.
• Conduct architectural reviews and assessments to ensure azure solutions align with organizational goals and compliance standards.
• Define and document Azure cloud architecture, including network design, storage, databases, identity management, and security configurations.

Requirement:

• Microsoft Azure cloud architecture design to meet customers technical, security, and business needs.
• Own and define cross-tower and complex, multi-technology Azure solutions (AVD, Azure AD)
  Design the solutions for AVD in Azure Storage and Azure Files.
• Should have Extensive experience withstanding up and operationalize Microsoft Azure, leveraging engineering and architectural concepts.
• Hands on experience with network connectivity - Azure VPN, Load Balancers, Azure Firewalls and Azure ExpressRoute.
• Experience in creating and maintaining document for the Azure VDI environment, including architecture diagram, configuration. guides and standard operating procedures
  Ability to manage and maintaining the Azure VDI environment, including monitoring, and troubleshooting issues, optimizing performance, and ensuring the environment is secure.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R24125310 (PARAMATASEEMA NAVEEN RAJANNA)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries

Responsibilities:

• Understand project requirements and design concepts to translate conceptualise design ideas into drawings
• Prepare layout plan, 2D construction Drawing, shop drawings, section details, space planning in fast-paced work environment
• Work closely with interior designer and sales designer to deliver high quality work
• Revise drawings and layouts to accommodate changes and enhancements
• Perform other duties as assigned by the superior

Requirements:

• Junior position at least 1 year and senior position at least 3 years experience
• Passionate in interior design, and able to manage new and existing projects to achieve project objective
• Required Skill(s): Autocad, Photoshop
• Can do attitude and able to multitask & work independently with minimum supervision
• Candidates who can start work immediately or on short notice will have an added advantage (Singaporean & Permanent Resident preferred)

• Apply a layer of material (e.g: cement) to the floor or other surfaces.
• Check that surface of substrate using a 2-m straight edge to ensure that it is level and true to design specifications.
• Fill joints and gaps with cement or plaster to ensure complete coverage of the surface.
• Lay tiles and timber according to the standard code of practice.
• Mix bedding materials according to manufacturer’s instruction.
• Perform task in accordance to organisational safety procedures.
• Prepare surface in accordance to industrial practices and manufacturer’s recommendation to ensure adhesion of the material.
• Set out tile lines according to the approved tiling setting out drawings and design specifications.

Project Executive

Working Hours: Monday-Friday (9.00 am - 6.00 pm)

Working Location: Bartley

Salary: $2500-$3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Location: Redhill

Basic + Commission + VB

JD:

• Research market trends, competitor offerings, and emerging client needs within sectors like commercial office/Retail design & renovation
• Proactively seek out and generate new business leads through networking, events, industry associations, cold call and referrals.
• Draw up networking proposals customized to individual sector
• Liaison between client, designer and other parties leading up to the securing of project, while ensuring client’s requirements are met and exceeded
• Prepare sales and marketing materials
• Work on project pricing, contracts, and fee negotiations that balance profitability with competitive positioning.
• Achieve and Deliver Sales Target
• Support in all aspect of Sales activities
• Manage and maintain clientele relationship
• Collate and evaluate client feedback and highlighting client feedback from customers for management analysis and follow-up

Requirement

• Diploma in Marketing, Business, Interior Design, or a related field.
• Min 3 years of experience in Business development, preferably in the interior design on commercial office/retail.
• Strong communication and interpersonal skills, with an ability to understand design concepts & to liaise with individuals at all level
• Committed, sales target driven and self-motivated
• Responsible and team player.
• Creative mindset with a passion for interior design.
• Excellent networking & communication and negotiation skills, with the ability to liaise with individuals at all level
• Committed, sales target driven and self-motivated

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email [email protected]

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Lim Wei Jye (Jaylyn)

EA Personnel Reg No: R24121213

about company

I am currently working with a global IoT leader with strategic investments from Temasek Holdings. They deliver cutting-edge, sustainable IoT and AI technologies that power smart cities and industries worldwide.

Salary stucture: Base + AWS. 3 rounds of interview to offer stage. 5 days in office at CBD.

about job

• Lead the development of integrated hardware and software solutions for the travel industry, adept at identifying customer needs, integrating internal and external resources, and delivering differentiated, competitive product solutions.
• Possess strong commercial sense, with a deep understanding of the industry and customer pain points
• Present solution proposals to mid-to-senior level clients and iteratively refine product solutions and ideas
• Collaborate with business units to formulate business strategies and sales approaches, achieving results and maintaining strong client relationships for long-term success

requirements

• Experience in fleet management, logistics, transportation, or security-related industries preferred; relevant client resources are a plus
• Min 5 years of experience, with min 3 years of pre-sales solution experience in the overseas B2B sector; experience with AI dashcams, in-vehicle hardware, and advanced driving assistance products is preferred
• Chinese speaking required as you need to liaise with Chinese stakeholders who can only speak and write in Chinese
• Deep understanding of IoT, big data, AI, and cloud computing, with pre-sales experience in integrated hardware and software solutions
• 50% travel. Willingness to provide overseas on-site support or business trips (e.g., to Europe, Latin America, the Middle East, Africa, Southeast Asia)

To apply online please use the 'apply' function, alternatively you may contact Stella at 96554170 (EA: 94C3609 /R1875382)

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job description

• This job position is fully commission base (Profit sharing)
• Set up meetings with clients directly to understand theirs requirements and needs
• Propose the best space planning, layout plans and design for the clients
• Prepare and present the quotation and design to the clients
• Coordinate and work closely with the suppliers and subcontractors to ensure quality of works and timeline to be meet according to the schedule
• Project management and site supervision
• Update clients on the work progress regularly

Requirements

• Minimum 1 year experience preferred.
• Candidates with no prior experience are welcome to apply
• Strong communication and interpersonal skills
• Proficient in English and Mandarin
• Pleasant working attitude, self-motivated, and hardworking
• Creative and able to work independently

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school’s timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students’ attitudes positively towards the subject.
• Ensure students’ work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school’s reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School’s policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students’ experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

QUALIFICATIONS

• At least 2 – 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant’s degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

Responsibilities:

• Brainstorming with the marketing and design team to come up with image ideas.
• Preparing and designing rough draft illustrations
• Defining any budget or time limitations.
• Creating complete illustrations by combining painting, hand-drawn and digitally created images.
• Refining image design using illustration software.
• Enhancing the design concept using a wide range of colors and graphics.
• Applying complex isometric techniques to add perspective to design shapes.
• Formatting final illustrations using CAD software.
• Ensuring that printed illustrations meet specified color and quality standards.
• Work in line with the company’s goals.
• Ability to multi-task and prioritise work in a fast-paced environment.
• To work closely with the Marketing and Operations team to ensure project completion within the deadline and achieve the targets and goals set forth by the management.

Requirements:

• Bachelor's Diploma in fine arts.
• Portfolio of completed illustrations.
• Prior work experience as an Illustrator, graphic designer, or similar.
• Work experience using computer-aided design (CAD) software.
• Drawing, painting and digital drawing skills.
• Knowledge of image editing and design software such as Adobe Illustrator and Photoshop.
• Ability to work under pressure and meet deadlines.
• Strong conceptual and artistic skills
• Preferably able to start work immediately or with short notice.
• Proficient in Spoken Mandarin as you need to alliance with Mandarin speaking associates.
• A team player
• 1-2 year experience in graphic design.

Location and Working Hours:

• Availability :Full-time (40 hrs/week) , Monday to Friday
• Location: Orchard MRT

Salary Range:

Negotiable based on candidates' actual working experience.

Kindly indicate your availability for work commencement, the reason for leaving, expected salary, etc.

We regret that only shortlisted applicants will be notified.

Job Description

We are looking for a techno-functional Payments Solution Architect with prior experience in cash management, transaction banking and payments related large transformation programs in the area of corporate, commercial and Institutional banking environment. The successful candidate should able demonstrate deep functional understanding with strong technical acumen.

Key Responsibilities

• Contribute to overall payments solution architecture and design, working closely with the product owner and enterprise architect.
• Participate in the design and planning of enhancements to existing payment applications and development of new applications.
• Hands on development, plus contributing to the overall software life cycle including participating in code reviews, setting coding standards and introducing new technologies to the team.
• Work with Quality Assurance and developers to ensure software builds meet system, functional and performance requirements.
• Strong work ethic and ability to work independently, as well as in an Agile development environment.

Skills Required

• Hands on knowledge and experience in core payments processing domain, for retail and corporate banking customers.
• Exposure to payments processing and clearing systems from multiple geographies is highly desirable; Exposure to correspondent banking payments (SWIFT) and payments in the APAC region preferable.
• Hands on expertise in at least one leading payment processing product such as Fundtech GPP, FIS Clear2Pay, Fiserv Dovetail, Volante VolPay etc. is highly desirable.
• Prior experience in agile ways of working
• Experience in defining the business problem and architecting technical solution in line with appropriate best practice, governance standards and methodologies
• Strong demonstrable experience in architecting Java/J2EE based enterprise applications from concept to production
• Strong working knowledge of Java Scripts, micro services, SOA, rules engine, caching technologies, DB/SQL , REST/SOAP services and patterns
• Demonstrable capability on various deployment topologies
• Strong desire and demonstrable track record for continuous self-learning on new technologies and concepts.
• Should possess excellent oral and written communication skills

EA Number: 11C4879

2 years contract basis (upon expiry of contract, extension or conversion based on performance)

Responsibilities:

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare, infrastructure, LTA etc
• Project management, design and development
• Liaise with clients, consultants and contractors
• Ensure compliance with local codes and regulations
• Confidently administer the contract and effectively manage the project/design team
• Coordinate and carry out tender, evaluation, recommendation and award processes
• Proactively identify and resolve technical coordination
• Keep updated on contractual and authorities' requirements
• Nurture, coach and upgrade skill levels of team members

Requirements:

• Architectural master/degree recognized by Board of Architects Singapore (BOA)
• Minimum 10 years post graduate experience
• Familiar with BIM and Authorities submission processes and guidelines
• Proficient in Autocad, Revit, Sketchup
• 5 days work week, Mondays to Fridays (Central, Singapore)
• All company benefits will be the same as a permanent staff (there is no bond to be served for the 2 years contract)

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

JOB DESCRIPTION

Job Title

ZScaler SME/Architect

Occupation

Infrastructure Architect

Job Description & Requirements

About the Client:

Our client is a leading Information Technology (IT), consulting, and business process services company.

Responsibilities:

• Be the Key member on the most critical and complex projects and issues.
• Set the technical direction of the entire ZPA Control Plane and influence the team to raise the standards in reliability, performance, scalability, architecture, security and engineering best practices.
• Become a subject matter expert on all ZPA architecture and behavior, including all aspects of software delivery as a hands-on engineer, building and operating high scale systems.

Requirement:

• Should have Experience on Plan, design, deploy, configure, integrate, and manage ZScaler (ZIA, ZPA) solutions.
• Strong knowledge and Experience on Network Security (SSL/TLS, VPNs, Firewall, IDS/IPS), Authentication systems such as LDAP, SAML, AD, Azure AD, MFA etc.
• Looking for a proven background in Internet and Security technologies such as SWG, Sandboxing, Next Generation Firewall, DLP.
• Looking for a Person having Migration Experience of Internet traffic from On-premises Proxy Server to SASE based solutions.
• Candidate Should have knowledge on ZScaler NSS and NSS log recovery and Experience of ZScaler SASE products integration with Splunk/SIEM and SOC.
• Looking for a Solid profile having good Experience on OSPF/BGP Routing of Complex Environments.
• Work Experience on DNS, other Proxy Products and PAC File server.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No. 01C4394 • EA Registration No. R24125310 (PARAMATASEEMA NAVEEN RAJANNA)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries

Responsibilities:

• Lead/Manage the project team to complete projects on time, on budget and according to client and authority's requirements
• Manage multiple projects concurrently from design stage to project completion
• Drive continuous improvement for architectural services by reviewing current workflow practices together with management
• Establish good working relationships with different parties to promote continued partnerships
• Support the procurement of new business
• Mentor and supervise the training and development of the team

Requirements:

• Min. 5 to 10 years' relevant experience as project architect
• Possess a Degree in Architecture or accreditation with Professional Bodies of equivalent standing such as the Board of Architects (BOA)
• Experience in AutoCAD, Revit, Lumion, Sketchup, Photoshop, Enscape
• Experience in delivering projects from concept to completion of construction
• Experience in private and public residential project in Singapore will be an advantage

Other information:

• Central, Singapore
• Mondays to Fridays, 9am-6pm

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Role:

You are a Reckless Ericka ambassador with a passion for our products.

You are a driven individual with the ability to be hands-on, have keen eye for details and are open to giving and receiving feedback.

You will play a crucial role in being exceptionally creative and work alongside the Designer to support areas in Sourcing and Production.

Key Responsibilities(Production):

• Support logistical needs via tracking, receiving packing and unpacking of samples shipments.
• Manage production sample fitting and photoshoot samples to ensure that tasks are executed timely and accurately.
• Attend any quality complaints and feedback, investigate issues, and ensure timely responses.
• Receiving and processing Orders, new stock, replenishments, returns, damages and transfers, as well as all stock-take exercises (studio).
• Opening, conduct quality check and packing new stocks to ensure that it meets Reckless Ericka's standards and specifications.
• Investigate defect issues with Designer.
• Ensure stocks tally online and onsite.
• Ensure overall tidiness and housekeeping of stock baskets and studio sales floor.

Key Responsibilities(Designer's Assistant):

• Have a user-centric, thoughtful approach to gathering insights (through focus sessions and surveys) and solving for customer needs
• Understand our market, targeted customer personas, and good design principles through research and customer studies.
• Prepare moodboards, designs, sketches and technical packs for collection development.
• Keep all tracking systems promptly updated providing effective visibility to the Designer.

Requirements:

• Weekdays (except PH), adjustable hours as long as present during our core working hours - 8+1h between 8am to 8pm.
• Effectively bilingual in English and Mandarin (spoken).
• Experience in fashion or creative related studies.
• Have a good understanding of Reckless Ericka's creative vision and our target customers.
• Proactively acquiring knowledge regarding company general information, fashion news, new product information, customer feedback and staff communication.
• Good working knowledge of Adobe Photoshop and Illustrator.

How to Apply:
Please submit your CV, portfolio (if applicable), and a cover letter detailing your relevant experience and why you’re the perfect fit for our team.

Email to: [email protected]

Please state the positon you are applying.

We thank all applicants for their interest; however, only shortlisted candidates will be contacted.

About the Company

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

About the Team

Our Cloud Security Solution team is responsible for the Go To Market of cloud security products, and aims the success of product commercialization.

Responsibilities

1. Responsible for developing security products targeting customers in Southeast Asia region, and identifying potential business opportunities.

2. Deeply understand customer requirements, develop cutting-edge solutions as a technical expert, provide consulting services to our partners.

3. Familiar with cloud security products and able to deliver matured solutions in different attack and defense scenarios.

Minimum Qualifications

1. More than 5 years of experience in developing security solutions, with a proven track record in operating security operations that exceeds 1 million USD.

2. Have experience in exploring solution scenarios, and have practical applications and best practices.

3. Be familiar with the principles and protection methods of common cloud security products, including at least three areas such as application security, host security, network security, identity security, data security, and security operations.

4. Possess strong communication skills and teamwork spirit; willing to take calculated risk; strong professional working ethics; result-oriented.

Preferred Qualifications

1. Proven track record in developing overseas cloud security markets is highly preferred.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.