Job Responsibilities

• Leading a Team of Mechanical Design Engineers to execute the Mechanical Design Engineering of the Project which includes preparation of RFQ, Specifications, Mechanical Data Sheet for
• Centrifugal Pumps, PD Pumps, Submersible pumps, Marine Loading Arm, Oil / Water Separator,
• Gangway, Jib Crane, Fire Fighting Equipment, Mixers, Gas Dehydration Package, Air
• Compressor and Dryer Package, Nitrogen Generation Package, Chemical Injection Package,
• Process Filters, Vessels etc. meeting Process Requirement, Client Specifications, Project
• Requirements and all applicable Project Documents to enable Vendors to accurately bid for the supply of Equipment.
• Review & Checking of Mechanical Documents such as RFQ, Specifications, Mechanical DataSheet and Technical Bid Evaluation for Mechanical Equipment to ensure compliance to applicable Codes & Standards and Project Requirements
• Review of Vendor Quotation, Evaluation & Preparation of Technical Bid Evaluation for
• Mechanical Equipment
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification.
• Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Supporting Procurement Team for purchase of Mechanical Equipment
• Review of Vendor Documents post order of all the Mechanical Equipment to ensure compliance to RFQ and other Discipline requirements.
• Co-ordination with construction and commissioning team in resolving site issues.
• Vendor Co-ordination & Procurement Assistance
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Participates in discipline and inter-discipline design check and screening meetings for
• compatibility, completeness and correctness in works
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Participate in Bid Clarification Meeting, Kick Off Meeting, Pre-inspection Meeting, Factory Acceptance Test, Site Acceptance Test etc.
• Vendor Shop visit for Work Progress
• Support Construction Team and Commissioning Team for the successful installation and commissioning of the Mechanical Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.
• Any other ad hoc tasks

Requirements

• Preferably Bachelor’s / Master’s Degree in Mechanical Engineering
• Preferably 10 - 15 years of experiences in Oil and Gas industry Software Requirements
• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

The School of Materials Science & Engineering is looking to hire a Research Fellow with extensive experience in hardware design and development. The successful candidate will drive the creation of new generations of soft grippers, designed using physics-guided neural networks. These grippers will feature optimized capabilities that leverage ongoing work in actuation, sensing, and advanced fabrication within the SGSR team.

Key Responsibilities:

• Responsible for design, prototyping, and testing of new advanced soft grippers.
• Formulate experiments to gather data used for training and optimization.
• Interact with other teams to gather data on sensing and actuation.
• Responsible for gripper control approaches.
• Responsible for designing and optimizing application related hardware setups for soft grippers.

Job Requirements:

• PhD in Mechanical Engineering, Aerospace Engineering, or Robotics.
• Experienced CAD user (SolidWorks or Fusion 360).
• Evidence (e.g. portfolio) of prototype development from concept to implementation.
• Experience using Machine Vision.
• Experience with programming languages (C, C++, Python) and embedded systems.
• Experience using Additive Manufacturing processes.

We regret that only shortlisted candidates will be notified.

Job Responsibilities

• Leading a Team of Mechanical Design Engineers to execute the Mechanical Design Engineering of the Project which includes preparation of RFQ, Specifications, Mechanical Data Sheet for
• Centrifugal Pumps, PD Pumps, Submersible pumps, Marine Loading Arm, Oil / Water Separator,
• Gangway, Jib Crane, Fire Fighting Equipment, Mixers, Gas Dehydration Package, Air
• Compressor and Dryer Package, Nitrogen Generation Package, Chemical Injection Package,
• Process Filters, Vessels etc. meeting Process Requirement, Client Specifications, Project
• Requirements and all applicable Project Documents to enable Vendors to accurately bid for the supply of Equipment.
• Review & Checking of Mechanical Documents such as RFQ, Specifications, Mechanical DataSheet and Technical Bid Evaluation for Mechanical Equipment to ensure compliance to applicable Codes & Standards and Project Requirements
• Review of Vendor Quotation, Evaluation & Preparation of Technical Bid Evaluation for
• Mechanical Equipment
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification.
• Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Supporting Procurement Team for purchase of Mechanical Equipment
• Review of Vendor Documents post order of all the Mechanical Equipment to ensure compliance to RFQ and other Discipline requirements.
• Co-ordination with construction and commissioning team in resolving site issues.
• Vendor Co-ordination & Procurement Assistance
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Participates in discipline and inter-discipline design check and screening meetings for
• compatibility, completeness and correctness in works
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Participate in Bid Clarification Meeting, Kick Off Meeting, Pre-inspection Meeting, Factory Acceptance Test, Site Acceptance Test etc.
• Vendor Shop visit for Work Progress
• Support Construction Team and Commissioning Team for the successful installation and commissioning of the Mechanical Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.
• Any other ad hoc tasks

Requirements

• Preferably Bachelor’s / Master’s Degree in Mechanical Engineering
• Preferably 10 - 15 years of experiences in Oil and Gas industry Software Requirements
• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Responsibilities:

• Review and maintain Safety Management System, Safe Work Procedures, and Risk Assessments.
• Identify improvement areas and monitor implementation of recommended measures through site inspections and team engagement.
• Collaborate with teams to plan, implement, and maintain effective WSHE work plans.
• Investigate WSH infringements and industrial accidents, recommending preventive actions.
• Handle incident reporting, investigations, and propose corrective measures.
• Conduct internal audits to ensure compliance with ISO 9001, ISO 14001, ISO 45001 standards, GGB, ConSASS, and Bizsafe.
• Liaise with relevant authorities on WSH issues.

Requirements:

• Registered WSHO & ECO Officer
• At least 5 working experience in construction industry (design & build/industrial warehouse)
• Working experience with A1 or A2 construction company.

___________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Electrical Engineers (Design prototypes / Systems/ control panel)

About us (About SLB)

We are a global technology company, driving energy innovation for a balanced planet.

Together, we create amazing technology that unlocks access to energy for the benefit of all.

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse groups of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Job Description:

Analyze, design, develop, maintain products and assist in their commercialization.

Basic knowledge on electrical motors (Induction and Permanent Magnet type)

Understanding of basic electrical circuits, motor control and VSD operations

Successful Position holders are excellent communicators, enjoy solving problems, and work well in teams.

Roles and Responsibilities:

• Design prototypes and systems for testing.
• Create test plans and reports
• Implement corrective actions on deviations
• Conduct or participate in technical reviews of requirements, specifications, designs, code and other artifacts.
• Contribute to design standards and support design re-use.
• Create and maintain product documentation.
• Provide support to customers.
• Perform mechanical calculation and analysis
• Perform risk assessments
• Author technical reports, papers, articles, patents and presentations.
• Maintain familiarity with company technology, organization and business.
• Basic knowledge of materials (metals, elastomers) would be a plus
• Basic knowledge of simulations would be a plus

Qualifications and Experience:

• Bachelor in Electrical Engineering with 1-3 year of experiences
• Strong technical knowledge in electrical engineering
• Experience on 3 phase systems and electrical machines
• Knowledge of simulation tools, control panel design, electrical cable calculations

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Design and prepare instructional materials for art curriculum lessons and demonstrate art techniques

Explore and conceptualise groundbreaking art programmes

To commit either weekly Saturday/ Sunday mornings and afternoons conducting a art programme for children or adult

Involves working Saturdays and/or Sundays for classes and events

At least a Diploma/Degree in Fine Arts, Design or related fields. - Absolute love, patience and care for children - Able to conduct and facilitate art learning in a small group setting - Fast learner, able to handle and communicate effectively with children and parents - Independent, resourceful, self-motivated with initiative. Honest, responsible and cheerful

• Proficient in using electrical and manual equipment and measurement tools
• Translate drawings over to workable and buildable projects
• Cut, shape timber according to measurements/requirements
• Installation of wooden fixtures such as cabinets or shelving unit
• Maintenance of differing wooden fixtures or repairs

• Lead Instrumentation Engineer for Design of Oil & Gas and Petrochemical Projects.
• Leading a Team of Engineers and Designers to execute the Basic Engineering Design & Detail Engineering Design of DCS System, F&G Systems, ESD Systems, TAS System, TGS System & MMS System, CCTV System, PAGA System, Telephone System and Fire Alarm System for Oil Terminal & Oil Refineries Projects.
• Co-ordination with client, conducting meeting if required to speed up the client/consultant’s approval for above basic design drawings/documents. Supporting the procurement in evaluating the supplier’s quotations and placement of orders.
• Development of subordinates by leading them in detail engineering activities for project. Discussions with team members to make them understand the project specifications and issuance of deliverables/drawings as per agreed dates in EDCL to meet the project schedule.
• Preparation of complete detail Instrumentation engineering schedule consisting of various stages such as IDC, IFA and IFC deliverables and documents related to procurement and to align it with project schedule.
• Preparation of Design Basis, Specification of Field Instruments, Data sheets, Preparation and reviewing of PCS, ESD and TGS Database, I/O Index, control narratives, cause and Effect chart for PCS & ESD.
• Discussions with vendors to freeze the final requirements as per specifications. Reviewing vendor drawings to ensure that they are in line with project specifications meeting all the technical requirements.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Preparation and reviewing of instrument drawings, I/O wiring diagrams, Layout drawings, Installation details, JB Termination details, cable schedule and Loop Diagrams.
• Checking the piping layouts, Isometrics, SPR 3D for the location of all field instruments and suggest providing accessibility for all field instruments.
• Preparation of Technical Bid Evaluation and reviewing of Commercial Bid Evaluation.
• Field Engineering Support Activities to complete the task in accordance with the project schedule.
• Preparing the Instrument Cable Trench and Tray Routing Layout Drawings.
• Software Requirements - Auto cad, MS Excel, MS Word

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job responsibilities:

• To prepare, check, verify and process invoices, delivery orders and payments
• To update bank record and monitor movement of cheques for signatures
• Issue cheque payment
• Filing for Accounts documents
• Data entry of invoices into Accounting system
• Perform any other ad-hoc accounting and administrative duties as required
• Any ad-hoc duties or assignment as instructed by your superior

Requirements:

• ITE in Accounting or relevant discipline preferred
• Preferably with some hands-on experience with NAVISION and accounting software
• Preferably at least 3 years of Accounting working experience in construction industry
• Meticulous with strong analytical skills

Responsibilities:

Your main responsibilities include planning, designing and implementing building projects such as residential & industrial developments, commercial complexes, parks and other township development projects both in the local and overseas markets. You will produce high quality architectural designs and concepts and/or assist in the design work. You will liaise with the clients, other consultants and the local authorities and work with the relevant parties in the authorities' submission, project execution, co-ordination and on-site construction supervision.

Requirements:

• Masters/ Bachelor Degree in Architecture, recognised by the Board of Architects, Singapore.
• At least 2 to 4 years of relevant experience in Singapore.
• Good project management, excellent communication and co-ordination skills, and great conceptualization and presentation skills.
• Strong flair for design using computer-aided design such as AutoCAD. Applicants with Revit/ArchiCad/BIM skills will be preferred

What do we do?

Arcadis DPS Group is the world’s leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. With sustainability at the heart of everything we do, our focus is on maximizing our impact aimed at improving quality of life. The solutions we develop, address important societal challenges around resilience, places, and mobility. Leveraging data and technology, we have the capabilities and services to meet client demands driven by global trends such as urbanization, climate change, digitalization, evolving stakeholder expectations and potential unforeseeable events.

With over 36,000 people, in over 70 countries, dedicated to improving quality of life, a career at Arcadis DPS Group is truly rewarding with excellent benefits and opportunities to develop your technical and professional development.

What are we looking for?

Our Semiconductor EPCM business is growing, and we are recruiting a mid-level to Senior Design Project Manager/ Design Integrator for our global projects in EU & US to work remotely based out of Singapore office. This challenging position involves working as part of a multi-discipline, highly interactive and coordinated team focused on projects including semiconductor manufacturing, data center facilities, and other state of the art manufacturing facilities. The successful candidate will be responsible for planning, coordinating, and implementing design projects from beginning to end. They will develop design strategies, delegate tasks, and mentor team members.

Job Scope:

• Responsible for the project management of small to mid-sized projects or designated portions of a larger projects.
• Establish project budgets, prepare proposals, and develop and maintain positive client relationships.
• Develop and maintain project resource plans.
• Develop and successfully manage project execution plans including definition of scope, schedule, communication tools, software tools, deliverable distribution lists.
• Proactively report and present project status to internal and external stakeholders.
• Successfully manage change on projects.
• Collaborate with the regional quality manager in the development of project specific quality plans.
• Properly identify and assess project risks and escalate to senior leadership as appropriate.
• Create and meet all project milestones and financial commitments.
• Other duties as assigned.

Job Requirements:

• PMP certified professional project manager or in pursuit of PMP certification.
• Bachelor's Degree in Construction Management or Engineering discipline.
• 5 years of construction related experience as Design Project Manager or Design Engineering Manager role.

Essential Skills:

• Must be able to work in an integrated team environment, must work well with ambiguous settings, and must work well independently and can manage multiple priorities.
• Understands the fundaments of the Last Planner® System and drives utilization within the Project Team.
• Strong leadership, business partnership, written/verbal communication and analytical skills are a must to ensure alignment with internal customers, peers, and suppliers.
• Possess the necessary skills required to develop project scope, budgets, schedules, and manage the execution of multiple simultaneous projects.
• Technical skills should be at a level required to thoroughly understand engineering decisions and code requirements related to building construction; cleanroom retrofits; and facility electrical, mechanical, and process systems.
• Extensive skills with the utilization of project management software (Project Estimating, Scheduling, and Procurement systems).
• Ability to deliver clear and accurate detail in a timely basis.

Job Description & Requirements

Responsibilities:

- Design of equipment / steel structures (EOT, Gantry, Monorail, Jib Crane etc).

- Coordinates with in-charged on new process requirements, design interference check and design changes

- Prepare non-standard crane, hoist part component and machinery design layout drawing

- Design and calculation of steel weight for quotation

- Structural analysis and design of cranes’ girder and supporting structures, etc.

- Preparations of submission documents for construction approval

- Drafting using AutoCad as and when required

Requirements:

- Degree in Civil (Structural) Engineering

- Experience with AutoCAD / StaadPro is a must

- Familiar with Revit / Solidworks is an advantage

- Qualification as Approved / Registered Technical Controller under BCA Specialist Builder (Steel Structure) class of licence is an advantage.

Job Description

Role and Responsibilities:

• To be part of a team of ESD architects/engineers to work on Environmental Sustainable Design (ESD)/ Green Mark /Green Building Index (GBI)/ LEED/ WELL projects
• To manage projects related to overall sustainability, decarbonization and carbon advisory
• To provide high level energy analysis and benchmarking energy consumption against best practices guideline and net zero roadmap for master planning in Singapore and overseas
• To provide cost-effective solution to project teams for improving building performance, decarbonization and sustainability
• To research on, review, recommend and implement industry best practices in sustainable building design and system

Qualifications

• Bachelor’s or Master’s degree in M&E, Architecture, building serves, building sustainability or a related field
• Minimum of 3 years of professional ESD experience in ESD
• Process a strong knowledge on common energy analysis/benchmarking, Excel-based energy calculation and energy modeling software, with a specific focus on IESVE or EnergyPlus
• Good understanding of building system, particularly in ACMV system and other M&E disciplines
• GMAP, LEED AP, WELL AP or credentials in related areas will be considered an advantage, as will the ASHRAE BEMP certificate (building energy modeling professional)
• Experience with modeling support software such as Open Studio and Rhino is desirable
• Project management skills with ability to actively manage and balance task, cost and time
• Team player with the ability to work as a team, willing to learn, contribute ideas and assist team member with tasks/duties, when required
• Highly self-driven and pro-active with a keen interest for exploring innovative solutions
• Broad based experience of computer systems and MS Office applications

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Position Overview:

We are seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Key Responsibilities:

1) Electrical Design:

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration:

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement:

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting:

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety:

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Job Requirements:

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

JOB DESCRIPTION

· Discussion with system engineers on IP requirement and micro architecture.

· Develop IP (control path intensive or data path intensive) meet functional requirement and protocol standard.

· Support SoC designer on integration, timing constraints and power domain setting.

· Support IP verification for verification plan review, test case debugging.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience in IP development (either control path intensive or data path intensive)

· Knowledge of timing, DFT and power structure.

· Familiar with UNIX/ Linux environment and scripting

· Experience on communication IP and/or video IP development would be advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Experience on communication IP development would be an advantage

· Experience on video IP development would be an advantage

JOB DESCRIPTION

· Work with system engineers on timing requirements and feedback on optimization.

· Work on SoC timing constraint, synthesis and timing closure.

· Work on power structure, eg. Isolation of power domains, level-shifter crossing voltage domains

· Conduct formal verification for release comparison.

· Support back-end implementation on timing violation analysis and fix.

· Support scan insertion and optimization.

· Support on power structure and power optimization.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Familiar with ASIC design flow

· Experience in logic synthesis, static timing analysis, timing closure

· Good understanding of DFT and Power structure.

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills