Roles & Responsibilities :

• Assists the Project Manager in supervision of all civil and structural works at Project Site.
• Ensure works carried out by subcontractors are in accordance with specifications and drawings.
• Ensure work programme, quality requirement, standards and construction materials requirements are carried out.
• Coordinate all civil & structural works with the consultants, sub-contractors, C&S and M&E coordinators to resolve any technical issues.
• Attend safety meetings and ensure works are carried-out safely on site.
• Any ad-hoc duties instructed.

Requirements:

• Bachelor's Degree in Civil Engineering or equivalent.
• Knowledge in the use of BIM, AutoCad and other relevant softwares.
• Able to read and understand construction drawings.
• Highly motivated, meticulous, independent with good written and verbal communication skills.
• At least 8-10 years of local experience.

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Support Interactive Panel Set up
• Any other task assign by Superior

Responsibilities

• Develop comprehensive project plans for solar energy systems, including scope, objectives, deliverables, and timelines.
• Conduct site assessments to evaluate feasibility and provide recommendations for solar PV installations.
• Supervise and coordinate on-site activities to ensure compliance with safety, quality, and environmental standards.
• Oversee project progress, ensuring alignment with project specifications, schedules, and budgets.
• Collaborate with procurement teams to prepare and manage the Bill of Materials (BOM) and ensure timely delivery of resources.
• Assist in designing and drafting mechanical and electrical drawings for solar PV systems.
• Monitor the performance of installed systems, troubleshoot issues, and ensure system optimization.
• Communicate with stakeholders, including clients, contractors, and regulatory authorities, to provide updates and address project-related concerns.
• Prepare and submit project documentation and reports to regulatory bodies and stakeholders.
• Manage risk assessment and implement mitigation strategies to ensure project success.
• Handle additional tasks as assigned to support project objectives.

Requirements

• Proficiency in AutoCAD, PVsyst, Helioscope, and other solar design and modeling tools.
• Strong understanding of solar energy systems, installation processes, and regulatory standards.
• Excellent project management and organizational skills, with the ability to handle multiple projects simultaneously.
• Willingness to work on a rotating shift schedule (Morning, Afternoon, Evening).
• Strong problem-solving skills and ability to work independently.
• Effective communication and interpersonal skills for collaboration with diverse teams and stakeholders.
• Passionate about renewable energy and sustainable development.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Key Responsibilities:

• Conduct comprehensive site surveys to evaluate potential solar installation sites, ensuring compliance with all relevant SCDF (Singapore Civil Defence Force) regulations.
• Prepare and generate technical drawings based on project requirements, ensuring all designs comply with relevant building codes and regulations.
• Perform technical assessments such as shading analysis, PVSyst simulations, consumption analysis, and other energy efficiency evaluations.
• Prepare economic analysis, proposals, and tender documents for submission, ensuring accuracy and competitiveness.
• Work closely with the procurement team to liaise with vendors and suppliers for up-to-date price lists, product details, and service information.
• Ensure that technical and design specifications are met through careful interpretation and application of engineering drawings.
• Collaborate with project managers, engineers, and other stakeholders to ensure project success from design to implementation.

Key Requirements:

• Strong proficiency in AutoCAD (a must) for creating detailed and precise drawings.
• Familiarity with PVSyst and Sketchup software is highly preferred.
• In-depth knowledge and experience in interpreting engineering drawings and translating them into practical design requirements.
• Strong technical skills in performing shading analysis, energy consumption analysis, and conducting various technical simulations.
• Excellent understanding of solar power systems and related technical documentation.
• Ability to prepare economic analysis, proposals, and tender submissions.
• Strong communication and interpersonal skills to liaise effectively with vendors, suppliers, and internal teams.
• Detail-oriented with a focus on quality, compliance, and efficiency.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Key Responsibilities:

• Manage and oversee multiple marine construction projects, from initiation to completion.
• Develop and implement project plans, schedules, and budgets.
• Coordinate with internal teams, contractors, and stakeholders to ensure project requirements and specifications are met.
• Monitor progress, identify potential risks, and propose solutions to ensure project milestones are achieved.
• Conduct site inspections and ensure compliance with safety, environmental, and quality standards.
• Prepare and review project documentation, including reports, drawings, and permits.
• Stay updated on industry trends and advancements to enhance project outcomes.
• Perform other duties as assigned to support project success.

Requirements:

• Prior experience in civil engineering or related projects; experience in marine construction is a plus.
• Strong interest in exploring and building a career in the marine construction industry.
• Excellent problem-solving skills and attention to detail.
• Ability to manage multiple projects and adapt to changing priorities.
• Proficiency in project management tools, Microsoft Office Suite, and CAD software.
• Strong communication and interpersonal skills to liaise effectively with teams and stakeholders.
• Willingness to travel and work on-site as required.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

Key Responsibilities

• Oversee and manage technical operations of marine vessels to ensure smooth functionality.
• Conduct regular inspections, troubleshooting, and maintenance of vessel systems and machinery.
• Ensure compliance with safety, environmental, and operational standards.
• Provide technical expertise for vessel repairs, refits, and upgrades.
• Coordinate with shipyards and suppliers for maintenance, spare parts procurement, and technical services.
• Analyze and resolve technical challenges to minimize downtime and enhance efficiency.
• Lead and train crew members to maintain and operate vessels effectively.
• Foster a positive work environment and encourage teamwork among all stakeholders.
• Willing to work in shipyards, offshore locations, or other challenging environments.
• Provide on-site support and supervision during vessel maintenance or emergency repairs.

Requirements

• Proven technical and operational knowledge of marine vessel operations and maintenance.
• Strong problem-solving skills with an independent and proactive approach.
• Demonstrated ability in people management and fostering positive work attitudes.
• Flexibility and willingness to travel frequently to remote and offshore locations.
• Experience working in shipyards or offshore environments is a plus.
• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

Roles & Responsibilities:

• Establishing work procedures, instructions and monitor performance and control of workmanship towards quality.
• Ensure sub-contractors and suppliers comply with project’s QA/QC requirement and manage project quality to ensure compliance to codes, standards and regulations.
• Carry out audit processes, review procedures, and ensure compliance with industry standards.
• Carry out various inspections and tests on the materials, products and components during various stages and completion of construction.
• Identify areas for process improvements, implement best practices and ensuring ongoing compliance.
• Maintain records of inspection results, deviations and corrective actions taken to ensure traceability and accountability.
• Initiate corrective actions to resolve the issue and prevent recurrence when defects or non-conformities are found.
• Review client’s complaints relating to QA/QC matters.
• Preparing and maintaining detailed reports on quality performance.

Requirements:

• ITE / Diploma in engineering or equivalent.
• At least 5 years of working experience in the local construction industry.
• Good communication and interpersonal skills.

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• To apply machine learning techniques to improve the accuracy of the inferencing system
• To select and analyze specific Android brand/model on their compatibility with the side-channel inferencing system
• To evaluate the performance overhead and accuracy of the inferencing system prototype

• Bachelor or Master Degree in Computer Science, Information Technology, Information Systems, Computer Engineering, or related disciplines
• Project experience in machine learning or Android security is a plus
• Good communication skills in English
• Advanced level of programming and software implementation, especially in C/C++ and Java
• Good understanding of existing machine learning techniques
• Good understanding of Android architecture and Android executables
• Good analytical, technical, and problem-solving skills
• Self-motivated and willing to work in a term

#LI-JN2

Job Summary

Responsible for the execution of process design involving preparation of calculations and review of process design drawings in accordance to customer specifications, applicable codes, standards and other generally accepted practices in the design of industrial plants such as petrochemical and oil refineries.

The Roles:

• Lead a process team to carry out process design engineering work in feasibility studies, Front End Engineering Design (FEED) and detail engineering design.
• Act as Key Person to execute tender preparation, actual EPC/EPCm project execution.
• Generate project specifications, design philosophy, PFDs, P&IDs, calculations, operation manuals to comply with clients’ requirement.
• Carry out process simulations and develop heat and material balances.
• Carry out process design for reactors, columns, drums, heat exchangers, tanks and develop respective process datasheets.
• Carry out hydraulic design for pumps, compressors, blowers and develop respective process datasheets.
• Conduct and/or attend P&ID design reviews, HAZOP, IPF, SIL studies, 3D model reviews.
• Check design outputs, datasheets and drawings prepared by Process Engineers to ensure accuracy and completeness to design requirements and concepts.
• Support construction and commissioning activities at site.
• Coordinate with client, Project Team and other engineering departments and vendors.
• Monitor manhours and schedule for Process work and deliverables.
• Perform other functions that may be assigned by Department Manager.

The Requirements

• Bachelor’s degree in Chemical Engineering.
• Minimum 10 years’ of experience.

Skill Requirements

• Ability to use computer equipment and peripherals to carry out routine computing tasks.
• Good knowledge in PRO/II, HYSYS, HTRI, AUTOCAD and Microsoft Office.
• Possess good communication and technical skills.
• Strong leadership qualities and analytical and reasoning abilities.
• Ability to read, analyze, and interpret common technical information, contracts reports, international codes and standards.

Interested parties, please send in your detailed resume.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

Job Description:

• Perform set-up, calibration, testing, and troubleshooting of circuits, components, instruments, and mechanical assemblies.
• Conduct testing and troubleshooting of assemblies and/or final systems to ensure performance and reliability.
• Work in shifts and within a cleanroom environment to support production schedules.
• Adhere to standard operating procedures and safety protocols.
• Collaborate with engineering and production teams to resolve technical issues.

Requirements:

• Diploma or degree in Electronics, Electrical Engineering, or a related field.
• Fresh graduates are welcome; prior experience in a semiconductor or manufacturing environment is a plus.
• Ability to work in shifts and a cleanroom setting.
• Strong troubleshooting and analytical skills.
• Good communication and teamwork abilities.
• Required to work shifts (incl. weekends) and in cleanroom environment

For interested applicant, kindly send your resume in Word/PDF format to include the following in your resume.

1. Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

License No: 23S1595

Registration No: R23116355

He/She will be responsible for conversion of signal processing concepts (theoretical or prototyped in MATLAB or C-Language) into algorithms to be implemented into embedded DSP or ARM processors. He/she will also work together with audio research team members to evaluate, benchmark internally developed cutting edge proprietary speech/hearing algorithms which will be implemented in a range of high-volume audio product lines for customers. He/she will be responsible for understanding DSP hardware structure such as memory management and processor pipeline. He/she will be responsible for DSP software development & validation including requirement analysis for algorithm implementation, support patent applications efforts and support internal or external customer developments.

Job Responsibilities:

• Design, document and implement DSP audio software modules based on allocated requirements of the DSP architecture
• Develop novel DSP based algorithms for embedded audio systems
• Work with and particpate in research activities together with research team members on the implementation of speech/hearing algorithms
• Collaborate with Sales/Engineering teams in productization, verification, testing and patent application of newly developed algorithms
• Perfom Design and Code reviews with members of the development team
• Perform Defect Analysis and remove defects on developed solutions
• Adhere to software development process defined for the develpment team
• Enhance or update existing software algorithms as required or effective algorithm function improvements
• Writing effective code, making it more streamlines & readable
• Work well with company's partners and vendors

Job Requirements:

• Minimum with a Degree in Engineering with exposure to Signal processing applications
• At least 5 years of experience in embedded real-time firmware development with emphasis on computaional complexity
• Prior experience in DSP development and implementation with an emphasis on audio implementations is preferred
• Proficient in C/C++, Shell scripting

Shall provide Data Centre (DC) operations at the Customer’s premises and premises identified by the

Customer. The DC Operations shall cover the following:

1. DC Environment Support; and

2. DC Facilities Management Services.

DC Environment Support

Shall monitor the facilities infrastructure in the DC to ensure that they are within the operating levels

defined by the Customers. The infrastructure to be monitored shall minimally include:

(a) Power infrastructure (such as Uninterrupted Power Supply and power distribution boards);

(b) Cooling Infrastructure (such as computer room air-conditioning units);

(c) Fire detection and suppression systems (such as FM200, water sprinklers, fire extinguishers);

(d) Environment monitoring system (such as humidity and temperature); and

(e) Water leakage detection.

(f) Shall ensure the DC infrastructure is monitored on twenty-four (24) hours a day, seven (7) days

a week, inclusive of Saturdays, Sundays and Public Holidays.

(g) The Vendor shall inform the Customer within one (1) hour when problems are detected.

(h) Shall work with the Customer and Customer-appointed Supplier to resolve any infrastructure

issues detected in accordance to the support hours as required by the Customer.

DC Facilities Management Services

(a) Shall ensure, through daily inspection, that the general cleanliness and tidiness of the data centre

are maintained by the Customer-appointed Supplier.

(b) Shall work with Customer-appointed Supplier on site preparation tasks such as network cabling

and electrical wiring, when required.

(c) Shall ensure the network cabling in the data centre and within the racks are neat and tidy.

(d) Shall work with the Customer-appointed Supplier for both scheduled and ad-hoc maintenance,

servicing, repair and upgrading works to the infrastructure at the Customer’s premises and

premises identified by the Customer.

(e) Shall plan and coordinate the maintenance activities. This includes polling the affected parties,

obtaining the Customer’s approval, and sending out messages to inform the affected party.

(f) Shall obtain the Customer’s approval before finalizing the plan for any activity.

(g) Shall provide on-site support during the maintenance activities unless otherwise agreed by the

Customer.

(h) Shall maintain up-to-date documentation of the data centre design layouts.

(i) Shall manage the physical security of the data centre in accordance with the guidelines provided

by the Customer.

(j) Shall monitor the following physical security infrastructure to ensure they are within the

operating levels defined by the Customer:

 Security Alarm and Security Card Access System; and

 Closed-Circuit Television (CCTV).

(k) Shall ensure that only authorised personnel are allowed to access the DCs.

 The Vendor shall ensure that all visitors to DCs are escorted during their activities on-site.

 The Vendor shall ensure that the visitors record their activities in the on-site log.

Requirement – DC Operations

Minimum Requirement:

The Vendor shall ensure, through daily inspection, that the general cleanliness and tidiness of the

data centre are maintained by the Customer-appointed Supplier. The DC Operator shall possess

minimally the following skill sets:

(a) Three (3) years of working experience in Data Centre Engineer Operations experience;

(b) Certified Data Centre Facilities Operations Manager (CDFOM) or equivalent; and

(c) ITIL v4 Foundation Certification or equivalent

Our client is in construction industry (Grade A1 Contractor/ Class 1 General Builder) and they provide full suite of integrated construction services and solutions in both the public and private sectors.

JOB DIMENSION (SCOPE)

• Coordinate design drawings with consultants to comply with requirements of the authorities.
• Review and provide solutions to technical problems as well as plan, monitor and report shop drawing production progress.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve construction issues on drawings and liaise closely with Architectural and M&E teams as well as the authorities.
• Supervise a team of BIM Modelers for the production of coordinated shop drawings and Concrete Body Plans
• Assist in doing tenders.
• Participate, work closely and give support to safety personnel at site on all initiatives/ matters relating to Safety and Health
• Comply with the Company Safety Management System and the WSHA and its subsidiary legislation

REQUIREMENT

• Possess Degree in Civil Engineering recognised by PE Board with minimum 2 years of relevant working experience preferably in construction firm
• Manage consultant design changes and maintain good documentation
• Resolve technical issues independently, analytical, high motivated with excellent team spirit and interpersonal skills
• Candidates with design experience will be added advantage

Job Summary

Responsible in providing general direction towards a successful completion of a project, ensuring the disciplines follow the quality standard set forth by the company. The job entails but not limited to identification of critical aspects of project execution and addresses them before they manifest as problems; verification and management of manhour consumption of different disciplines during the project execution.

The Roles:

• Manage Project 3~20 million and above.
• Facilitate job interfacing with various disciplines, procurement and construction group.
• Conduct contract reviews, risk analysis and contingency plan.
• Organize proposal / project task force and staff allocation.
• Set project policy for quality, safety, cost and schedule.
• Initiate kick-off meeting with clients and internal disciplines.
• Prepare overall budget cost plan and analysis.
• Monitor and analyze project operation and schedule.
• Coordinate EPC cost estimation.
• Represent the company to client.
• Control project documents and design changes.

Requirements:

• Bachelor’s degree in Mechanical Engineering, or Chemical Engineering preferred with at least 8 years of experience or equivalent.
• Have good knowledge of all disciplines, including Process Technical knowledge.
• Good Knowledge in Basic Design and P&ID.
• Solid track record in EPC Project Management in Oil & Gas and Petrochemical Industry.
• Knowledge of the fundamentals of project management, front-end engineering and relevant project planning and scheduling tools preferred.
• An effective team player with good communication and interpersonal skills, as well as strong presentation, technical, analytical and troubleshooting abilities.
• Self-motivated, with the ability to initiate plans and carry out all assignments professionally, diligently and expeditiously in accordance with established company procedures.
• Proven Leadership and Management skills.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.R21103082)

• Responsible for preparing and modifying precast schematic, detailed, and production drawings for precast concrete components, steel moulds, and reinforced concrete (RC) structures.
• Preparation of 2D and 3D design drawings and presentation
• Develop solutions for technical and design complications with reference to the Singapore’s established standards.
• Responsible for the performance of elementary designation computations and compilation of data.
• Participate in client liaison, authority consultation, coordination with consultants and subcontractors, and design and construction meetings.

Requirements:

• Diploma/Degree in Civil Engineering or equivalent
• At least 2 years of related working experience

If you are interested, please send in your updated resume by clicking “Apply now” or email to [email protected]

Lim Siew Hua

Registration Number: R1984199

Workstone Pte Ltd

EA License Number: 19C9998

(Only shortlisted candidates will be notified.)

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

What you'll be doing

• Provide 1st and 2nd level IT support for local and remote users, ensuring smooth daily operations
• Monitor and maintain end-user devices, including installations, configurations, and updates
• Manage IT assets, including tech refresh, preventive maintenance, and software licenses
• Oversee procurement of IT equipment and software, ensuring efficient processes and vendor management
• Maintain accurate asset records and ensure stock availability for end-user computing needs
• Support the implementation of new technologies to enhance system efficiency
• Perform additional IT tasks as required

What we're looking for

• Diploma level and above in Information Technology
• 1 - 3 years of experience in providing IT support to end-user community, preferably in Healthcare
• Proficient in task tracking and resolving minor IT issues

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

**We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

Responsibilities:

• Develop software in embedded Android/Linux devices including software design as well as implementation and customization of solutions using Android/Linux operating systems.
• Perform system tunning/optimization and improve system stability using a strong background in embedded system,operating system, and multi-thread programming.
• Involved in system architecture and design and system requirements definition.
• Participate in requirements gathering, drive solutions, test, deploy, maintain and enhance embedded implementations.
• Ability to interpret and evaluate designs and assist in resolving firmware issues.
• Ability to conduct design reviews and incorporate knowledge of real-time embedded Android/Linux firmware.

Requirements:

• Degree in Electronic/Electrical/Computer Engineering/Computer Science, Software Engineering or related field.
• Good understanding of embedded Linux architecture.
• Minimum 8 years of hands-on experience with embedded Linux operating system, frameworks development, and C/C++.
• Minimum 5 years of hands-on experience with Linux bootloader and kernel.
• Must be able to develop solutions at the Linux device driver and HAL layers.
• Able to develop in Android Framework layers is an advantage.
• Experience working in a collaborative and distributed team environment.
• Proficiency in the use of debugging tools (ADB, JTAG, Kernel debug) applied to areas such as power management, task control, and memory management, as well as other complex debugging situations.
• Excellent teamwork skills, flexibility, and ability to multi-task.
• Able to manage one's time efficiently.

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor's RFI's and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Requirements:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

Job Summary

You will be working with a team of professional engineers to challenge status quo, think different, thrive in ambiguity to meet mission objectives of our customers. You will lead a team of software engineers and work closely with other cross functional teams, Service Delivery Managers and Project Managers to deliver quality satellite ground software systems to our customers.

Job Responsibilities

• Drive the design and architecture of satellite ground control and antenna management software systems.
• Lead software team in implementing design, testing, verification, and validation of all software components.
• Implementation of cybersecurity measures for software applications
• Generate and maintain software development documentation.
• Plan and provide necessary software maintenance, training, and consultancy to users on the deployed software.
• Continuously develop new skills & techniques in software technologies to improve and reduce software development time and effort.
• Participate in the definition and development of future products.
• Collaborate with various stakeholders including customers, and engineering teams across organizations.
• Able to challenge the status quo, think different, thrive in ambiguity, care for team members and being ever curious.

Job Requirements

• Knowledge in Computer Engineering or related field.
• At least 8 years’ experience in mission critical system software development.
• Proficient in developing full stack applications, preferably with C#, JS.
• Experience with database, API design, network architecture, message broker, and cloud technologies.
• Experience with core engineering infrastructure tools such as GIT servers, CI/CD pipelines, Container Technologies.
• Familiar with agile software development lifecycles.
• Good understanding of hardware.
• Able to communicate in English and work in a fluid, innovative environment.
• Singaporean only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

We are seeking a System Engineer for our client ST Engineering.

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please click apply, or submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Goh Kwan Way Marc

EA License No : 06C4642

EA Reg No : R24120754

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor's RFI's and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

Requirements:

• Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

What you'll be doing

• Implement and manage security solutions like firewalls, IDS/IPS, and encryption
• Perform security audits, vulnerability assessments, and risk analyses
• Develop and enforce security policies, procedures, and controls
• Integrate security into IT systems, ensuring secure configurations and hardened settings
• Investigate and escalate security incidents promptly
• Collaborate with IT teams to embed security across systems and applications
• Stay updated on security trends and technologies
• Work with contractors to deliver network and security services
• Handle additional IT duties as assigned

What we're looking for

• Bachelor Degree in Information Technology, Computer/ Network Engineering
• 4 - 6 years of experience in similar role and/ or with CyberTrust Mark certification, preferably in Healthcare will be advantageous
• Extensive expertise in security technologies, including firewall administration, encryption, network protocols, and designing robust security architectures
• Certification such as CISSP, CCSP, CEH, or advanced security certifications will be advantageous

Interested applicants, kindly furnish us with your detailed resume in MS Words format and click "Apply Now" button.

**We regret to inform only shortlisted candidates will be notified. Applicants who do not possess necessary experience or qualification will still be considered on individual merits and may be contacted for other opportunities.**

**JobStudio will not solicit any money, request to use your bank account for business or request you to transfer any monies to any parties. Please be aware of scams impersonating JobStudio and our employees. You may call our office directly for verification. We will not be liable for any loss arising from scams.**

JOBSTUDIO PTE LTD

EA License No: 10C4754

EA Personnel: Stephanie Toh

EA Personnel Reg No: R1217674

We are looking for a dynamic Sales Engineer to drive sales growth across multiple industries, including construction, semiconductor, electronics, and chemicals. Fresh graduates with a passion for engineering and sales are encouraged to apply. Owning a car is preferred for this role.

Key Responsibilities:

• Identify and develop business opportunities by promoting engineering solutions to clients in construction, semiconductor, electronic, and chemical sectors.
• Build and maintain strong relationships with clients, consultants, and industry stakeholders.
• Provide technical consultation and solutions to meet customer requirements.
• Prepare and deliver presentations and proposals to prospective clients.
• Conduct market research to identify new opportunities and stay updated on industry trends.
• Collaborate with internal teams to ensure customer satisfaction and successful project execution.
• Achieve sales targets and report on key performance indicators.

Qualifications:

• Diploma or Degree in Engineering or a related field.
• Fresh graduates are welcome; prior sales experience is a plus.
• Excellent communication and interpersonal skills.
• Strong problem-solving and technical aptitude.
• Highly motivated, results-driven, and capable of working independently.
• Must own a car (preferred).

For interested applicant, kindly send your resume in Word/PDF format to include the following in your resume.

1. Current Salary

2. Expected Salary

3. Availability

4. Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

License No: 23S1595

Registration No: R23116355