This position is responsible for installation, commissioning, and service of marine automation systems. This open position is for our Singapore office.

Key responsibilities

· Strong technical background within automation fields, ideally within maritime environments.

· Calibration / Installation /Commissioning of Various Instrumentation (Pneumatic Electrical & Electronics)

· Troubleshooting and remote maintenance of various automation products including boiler controls and calibration/replacement of related field instruments.

· Experience with power management system and electrical troubleshooting.

· Perform Retrofit tasks and upgrade of existing automation systems.

Requirements

· Degree or Diploma holder in Electrical/ Electronic/ Instrumentation

· With 3-5 years of working experience.

· Thorough knowledge of marine Automation equipment, good communication in English (written & oral).

· Must possess good knowledge in Instrumentation and control system of the power plant and ocean-going vessels.

· Willing to travel oversea assignment work with short notice.

· A very good team player and an out of the box thinker.

• Assist the Operation Manager / Project Manager in coordinating site investigation project, planning of location, site clearances, scheduling.
• Obtaining land permission, utilities services clearances and meeting with stakeholders.
• Meeting and correspondence with Client on project timeline and requirement.
• Organizing of rigs & manpower resources for the site investigation work.

• Relevant degree/ diploma in Geology; Civil Engineering or the Built Environment.
• Familiar with Utilities Services Clearances procedure of various Agencies; and having RES/REO certificate is an advantage.
• Fresh Graduate are welcome

Job Title: QA Engineer (ID8149)
Location: Woodlands, Singapore
Working Hour: Monday – Friday 9:00am – 6:00pm
Salary: $4000 - $5000

Job Description:
Ensure proper usage and calibration of measuring equipment
〮 Managing customers' request and complaints (KIS)
〮 Ensure customer request is reflected in process and participates in assessing CAR/8D if necessary
• Managing the FMEA & Control plan
• Having analysis knowledge of the SPC chart
• Experience of conducting Audit for the customer
• Supervising QC activities (One-point-lesson etc)
• Compiling Raw Material Inspection/Certificate report
• MES management (measurement lock and report format etc)
• Rework Data Compiling
• Weekly Report
• Part Measurement (SureInspect / Ultrascan etc)
• Conduct Various audits (Internal process, Site, Supplier etc )
• Handle Audits from customers and ISO certification bodies
• Document Control of whole KTS
• Maintain and generate Quality Management System procedures and processes
• New employee Briefing and OJT for Quality portion only
• Continual Improvement Activities
• Process/ Line Audit per month

Requirement:
• At least Diploma in any field
• 4 or more years of relevant experience
• Clear commuication and documentation skills to liaise with associates and handle documents
• ISO audit experience

Careers that Change Lives

Engineers are indispensable to achieving our Mission. That’s why we empower you to bring the best of your experience to bear on our market-leading portfolio of innovations. Apply your existing skills and develop new ones, with the training, mentorship and the guidance you need to continue to develop your expertise. With roles in specific business units, as well as at the corporate level, you’re sure to find an opportunity to make an impact that’s right for you.

Today, we’re partnering across the industry to confront systemic healthcare challenges – this requires bold leadership. If you want a challenging, energizing, rewarding career that changes lives, join us. Help us bring the next generation of life-changing medical technology to patients worldwide.

A Day in the Life

The Quality Engineer be responsible to ensure that sterilization process comply with the specification and regulatory government agencies requirements – FDA, PMDA, ISO 13485. Will lead and participate in the Global Sterilization committee and standardization.

• Lead/participate sterilization process meets specification/requirement, maintenance of sterilization equipment, process and equipment improvement
• Provide support to production for any technical issue and other activities (Nonconformity management, CAPA, training, calibration, maintenance, etc.).
• Collaborate, update and maintain FMEA for sterilization.
• Support, review and approve the following processes:Document updates/approvals related to Sterilization
  Routine Sterilization Release
  Corrective / Preventive Actions related to Sterilization
• Work on special projects assigned by Supervisor/Manager.

Must Haves:

• Bachelor’s degree in engineering (Biomedical engineering, biotechnology, etc.) or equivalent.
• Minimum 2 years’ experience in engineering role related to manufacturing of medical devices.

Nice to Have:

• Good communication and interpersonal skills, ability to articulate ideas clearly and concisely to people of all levels.
• Preferably experience in EO Sterilization, sterilizer equipment, and/or Bioburden / Endotoxin testing

About Medtronic Singapore Operations

Medtronic Singapore Operations was among the first international medical technology firms to set up manufacturing operations in Singapore. We are one of the most advanced medical device manufacturing sites and the first manufacturing facility of its kind in the region to make implantable cardiac leads, pacemakers and monitors.

As a company Medtronic is intensely focused on creating a workplace environment which reflects our standing as the world’s top medical device company.

What We Offer

We recognize the personal worth of employees by providing an employment framework that allows personal satisfaction in work accomplished, security, advancement opportunity, and means to share in the company's success. We believe in rewarding our staff with a complete package of benefits designed to support them at every career and life stage. As a result, our employees have access to the following benefits, to name a few:

• Our global well-being program supports your physical, emotional, social and financial well-being.
• Medtronic Employee Assistance Program offers confidential support and resources to build and enhance employee and organizational resilience, productivity, teamwork and psychologically healthy workplaces.
• Various insurance benefits include Inpatient and Outpatient Medical Insurance, Life, Disability and Accident Insurance.
• We have generous employee referral programs, employees stock purchase plan, leave benefits, and more

Physical Job Requirements

The above statements are intended to describe the general nature and level of work being performed by employees assigned to this position, but they are not an exhaustive list of all the required responsibilities and skills of this position. The physical demands described within the Day in the Life section of this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Civil Engineer Job Responsibilities:

• Completes construction projects by preparing engineering design and documents and confirming specifications.
• Designs construction projects by studying project concept, architectural drawings, and models.
• Prepares engineering design by collecting and studying reports, maps, drawings, blueprints, aerial photographs, and tests on soil composition, terrain, hydrological characteristics, and related topographical and geologic data.
• Determines project costs by calculating labor, material, and related costs.
• Creates feasibility study by analyzing engineering design, conducting environmental impact studies, and assembling data.
• Produces engineering documents by developing construction specifications, plans, and schedules.
• Confirms adherence to construction specifications and safety standards by monitoring project progress, inspecting construction site, and verifying calculations and placements.
• Fulfills project requirements by training and guiding operators.
• Maintains operations by enforcing project and operational policies and procedures.
• Provides engineering information by answering questions and requests.
• Complies with federal, state, and local legal requirements by studying existing and new legislation; anticipating future legislation; enforcing adherence to requirements; and advising management on needed actions.
• Maintains project database by writing computer programs, entering data, and completing backups.
• Contributes to team effort by accomplishing related results as needed.

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• B.E/MA in Civil Engineering

Piping Engineer

Singapore J11B project Site - 8 Hrs per day X 6 days per week
1 year Project contract:Extensions will be based on project progress

Main Duties and Responsibilities:

■ Provide technical assistance and support to contractors to ensure the proper understanding and application of AL standards and procedures and CDI requirement;

■ Participating in the drawing review and provide the constructive suggestion to the Design team, and keep follow up
■ Assist SM for the preparation of documentation on his/her discipline filed
■ Receive, inspect and hand-over E&C CHN equipment and materials to contractors;
■ Perform safety control, and delivery safety events report,(PSSI, near miss), BSV, ACT implementation
■ HSES Leadership essentials & Act QHSE commitment, animate and co-ordinate HSE activities, attend the Safety meeting, safety walk, safety talk, HSE minute & toolbox talk, have the authority to notify any contractor to immediately suspend its work or part of its work if the hazard in question constitutes a serious and immediate threat to the safety of persons or property;
■ Perform quality inspections and report on non-compliance;
■ Up-date and maintain project site documentation in his discipline, propose evolution to codes and standards related to construction works;
■ Collect, check and report actual work data from contractors in order to establish progress report;
■ Participate to CCI activities with the acceptance of works and related punch lists;
■ Have the authority to request quality controls compliance with ITP and test pack, to check, inspect witnesses, approve or reject work or part of work.
■ GDSR & EIS & PID checking, Internal cleanliness control for the required pipelines
■ Useful Quantitative collection for the discipline part
■ Discipline capitalization for the completed projects (Before demobilization) with constructive information & experience shared for the input of next project

Qualifications:

■ Bachelor degree in engineering (chemical / mechanical) or above;
■ Basic knowledge of related construction methods (such as steel structure, Cryogenic and high temperature piping installation, machine and equipment installation, FBT erection, etc..);
■ At least 2 years experience in site construction of relevant industry;

We are seeking for a proactive and results-driven professional to bolster our Technical Security Sales Unit’s efforts in achieving sales and business objectives across the region. This vital role is centered on upholding operational excellence, mitigating risks, strategically expanding our market reach, and sharpening our competitive edge. Through targeted sales initiatives, deep engagement with key accounts, and the cultivation of strong relationships with channel partners and industry stakeholders, you will play a crucial part in driving our business growth.

Key Responsibilities:

• Partner with Sales and Category leads to surpass sales objectives, leveraging strategic initiatives and a deep understanding of market dynamics.

Product Demonstrations: Your role involves identifying client needs and developing tailored solutions to address them. You will present these solutions clearly, demonstrating their value and fit within the client's operations. Responsibilities include:

• Analyzing client requirements and challenges.
• Designing and presenting customized solutions.
• Ensuring solutions are clearly understood and align with client environments.

Your objective is to effectively communicate the benefits of our solutions, ensuring they resonate with the client's specific needs.

• Drive Lead Generation: Expand the regional prospect database and engage System Integrators/Channel Partners in targeted sectors using innovative strategies.
• Sales Strategy: Develop and implement a targeted sales contact plan, nurture key partner relationships through industry events, and conduct thorough market analysis to maintain a competitive edge.
• Customer Engagement: Provide prompt, professional responses to inquiries from resellers and customers, ensuring exceptional service standards and high customer satisfaction.
• Supplier Collaboration: Collaborate closely with suppliers to secure superior support and competitive advantages, reinforcing our market leadership position.
• Professional Development: Dedicate yourself to continuous personal and professional development by staying informed of industry trends, maintaining a proactive work ethic, and evaluating performance against key metrics.
• Team Collaboration: Foster a culture of collaboration and innovation within the team, contribute to cross-functional projects, and propose new business strategies to meet customer needs.

Job Requirements:

• Experience and Education: A degree in STEM or relevant Business discipline is preferred, along with significant years of experience in business and marketing, demonstrating a deep understanding of industry dynamics.
• Domain Expertise: Strong background and passion for the IT security domain, with extensive experience addressing challenges and staying abreast of industry trends.
• Self-Motivated and Strategic: Self-motivated individual with a proven ability to identify new opportunities, strategize effectively, and deliver impactful solutions based on years of experience and insights.
• Results-Oriented: Track record of achieving substantial outcomes and a strong desire to contribute to business success through well-honed expertise and seasoned decision-making.
• Communication and Engagement: Exceptional listening, communication, presentation, and negotiation skills honed over years of engaging with diverse stakeholders.
• Organized and Efficient: Highly organized, independent, and efficient worker who excels in both team-based and autonomous settings, leveraging years of experience to streamline processes and drive efficiency.
• Adaptability and Collaboration: Adaptable professional with the wisdom to know when to take initiative independently and when to collaborate for maximum impact, drawing from years of experience in navigating complex business environments.
• Professionalism and Values: Professional and disciplined approach in all dealings, embodying the company's values and standards through years of experience in upholding integrity and ethical conduct.

Join Our Team:

If you are a seasoned professional motivated by overcoming challenges, fostering breakthroughs, and have a passion for IT security honed through years of experience, we want to hear from you. We are seeking a collaborative individual with a wealth of experience and fresh ideas to drive sales initiatives and grow professionally in a supportive, dynamic environment. Apply now to embark on a rewarding career journey with us.

Responsibilities:

Manage quality related activities throughout the design, project execution, assembly and testing phase.

• Perform Quality Control Activities as required to ensure product conformance with relevant industry standards and specifications.
• Work closely with the project team in failure investigation of product.
• Adhere to safety policies and procedures in accordance with Safety Management System. Including:

1. Active participation and contribution in safety meetings.
2. Report all hazardous and unsafe acts.
3. Actively promote positive safety culture.

• Adhere to Quality policies and procedures in accordance with the Quality Assurance System. Including:

1. Compliance to work instructions.
2. Raising corrective actions for all non-conformance.
3. Identifying areas requiring improvement and/or audit.

• Implement and work in accordance to the Quality Management System manuals and procedures.
• Performs in process checks/inspections in accordance to industrial specifications.
• Ensure on-time calibration is carried out for all in-house inspection, testing equipment/devices and maintenance of all calibration records as per document control process.
• Identifying and feedback areas of improvement in the current operational processes.
• Perform documentation (eg. Work Instruction, Process/equipment checklist, etc) review and update when required.
• Participate in internal audits when required.

Requirements:

• Degree or Diploma in Engineering/Electrical and Electronics.
• Possess in-depth knowledge in ISO9001, 14001 & 45001.
• At least 3 years experience in electronics industry.
• Working experience in electricl/electronics industry will be added advantage.
• Work wells under pressure.
• Good interpersonal skills.
• Willingness to learn new skills.
• Able to work OT.

THE ROLE:

AMD is looking for a Senior Product Development Engineer to work on performance evaluation on our Adaptive Soc and FPGA products. You will work closely with designers to plan, develop, and execute various test to make sure silicon performance and features are meeting design target in datasheet specification. You will be implementing test solutions using FPGA logic to apply characterization patterns and workaround to resolve any silicon issue.

THE PERSON:

If you are PASSIONATE, ADAPTABLE, and INNOVATIVE, AMD is the right place for you.

KEY RESPONSIBILITIES:

• Develop Hard IP system level test around high-speed protocol, such as PCIE, Display Port, Ethernet and USB for system performance measurement.
• Development of RTL test designs, driver to validate IPs
• Takes responsibility for isolating the issue to a specific area such as test gap, SW bug, silicon bug, or process deviation.
• Implement testing across process, voltage, and temperature, as well as volume system testing. To analyze test results to discover trends and outliers
• Diagnose and debug the pattern failures on bench to root cause the problem
• Work closely with cross functional team, such as Design, Application, Product Verification and etc to investigate and find solutions to various issues.
• Working on the cutting-edge AMD Adaptive Compute Platform (ACAP) and devices Generates performance characterization plan with IC designers
• Analyze characterization results and create characterization report
• Apply statistical analysis skills and generate trends for the analysis of device feature performance over process windows.
• Create and improve automation script for data analysis and test automation

PREFERRED EXPERIENCE:

• 5-8 years’ experience in pattern development or analysis on high-speed protocol or transceiver system.
• Extensive knowledge with high-speed protocol system (PCIE, Display Port, Ethernet or USB) is a must.
• Good experience in high-speed protocol system design and understanding their working principle/relationship is a must.
• Proficient in programming languages such as Phyton, TCL and C is a must.
• Familiar with Linux driver and firmware development with x86 or ARM environment is highly preferable.
• Familiar and be able to work under Linux environment is highly preferable.
• Digital logic design knowledge in Verilog is highly preferable.
• Experience in Gate Level Simulation is highly preferable.
• Good understanding of NPI Process, ATE/bench testing and debug isolation methodology is preferable.
• Basic understanding of FPGA. Knowledge of Vivado Software is a plus.
• Self-motivated and a strong team-player
• Strong analytical and problem-solving skills
• Passion in learning new tools and technologies

ACADEMIC CREDENTIALS:

• Bachelor/Master’s degree in Electrical/Electronic/Computer Engineering

LOCATION:

Singapore

Create and execute a strategic project sales plan that expands our customer base and extends the company's business as set

Meet with potential clients and grow long-lasting relationships that address their needs. Set objectives, train and coach foremen, and monitor their performance.

To Lead maintenance, minor work/project teams, advice remedial proposal, manpower, materials, equipment, tools, consumables, height access equipment and other necessary equipment to undertake the following as

The team maintain buildings by making repairs and performing safety checks. Maintain the day to day operations of the building. Perform routine preventive maintenance. Minor Work team performs small values repair under SORs. Ability to work under pressure situations and exercise good judgements. Ability to read and understand test equipment, measuring devices and safety manuals. To carry out any other duties and responsibilities as assigned. Perform as a driver to pick up and drop workers and purchase materials when necessary

He prepares quotations, coordinate repair works schedules, liaise with the subcon / repair work team to start and complete the works. Any other works assigned by management

Capabilities and behaviours

A good team player with strong analytical and leadership skills

Possess good technical knowledge of building works and M & E will be advantage. Possess good communication skills and be able to relate to different levels of people.

Ability to plan, organise and supervise a team of technicians and contractors in carrying out planned and ad-hoc maintenance work.

Possess strong leadership and interpersonal skills with good command of spoken and written English

Must be prepared to perform shift duties and work on weekends and public holidays

Educations & Experience

Prior experience in building operations in commercial buildings will be an added advantage.

NITEC and above or relevant studies.

Team oriented and good interpersonal skills.

Able to perform 12 hour shift and standby duties.

Only shortlisted candidates will be informed

This is a computer generated document. No signature is required

54 Hume Avenue Summer Hill #06-04 Singapore 596231 Tel: 6969 9028 E: [email protected]

Ong GC Consulting Pte Ltd

UEN 201716698N

BCA Registered Contractor (for public sector works) – CR06 (L1) , CR01 (Single Grade)

To Lead maintenance, minor work teams, advice remedial proposal, manpower, materials, equipment, tools, consumables, height access equipment and other necessary equipment to undertake the following as

The team maintain buildings by making repairs and performing safety checks. Maintain the day to day operations of the building. Perform routine preventive maintenance. Minor Work team performs small values repair under SORs. Ability to work under pressure situations and exercise good judgements. Ability to read and understand test equipment, measuring devices and safety manuals. To carry out any other duties and responsibilities as assigned.

He prepare quotations, coordinate repair works schedules, liaise with the subcon / repair work team to start and complete the works

Capabilities and behaviours

A good team player with strong analytical and leadership skills

Possess good technical knowledge of building works and M & E will be advantage. Possess good communication skills and be able to relate to different levels of people.

Ability to plan, organise and supervise a team of technicians and contractors in carrying out planned and ad-hoc maintenance work.

Possess strong leadership and interpersonal skills with good command of spoken and written English

Must be prepared to perform shift duties and work on weekends and public holidays

Educations & Experience

Prior experience in building operations in commercial buildings will be an added advantage. Diploma and above or relevant studies.

Team oriented and good interpersonal skills.

Able to perform 12 hour shift and standby duties.

Only shortlisted candidates will be informed

THE ROLE:

The candidate is required to drive end-to-end board-level and silicon physical failure analysis and develop new FA techniques to enhance productivity rates.

THE PERSON:

You will have strong written and verbal communication skills and a systematic approach to your job. A team player, you are used to delivering results in a fast-paced environment.

KEY RESPONSIBILITIES:

• End-to-end board-level and silicon physical failure analysis (PFA).
• Responsible for electrical FA and physical FA from AMD AECG global RMA, production rejects, reliability, and engineering evaluation failures.
• Collaborate with cross-functional teams on failure root cause investigation and drive continued improvement plans.
• Develop new FA techniques to enhance productivity and hit rate.
• Equipment owner of FA tools.
• Candidates must take on the role of an AMD Company Emergency Response Team (CERT) member for critical lifesaving.

PREFERRED EXPERIENCE:

• Minimum 5 years of experience in package or silicon failure analysis.
• Knowledge of semiconductor circuit analysis is required.
• Knowledge of Optics Fault Isolation, such as OBIRCH, PEM, thermal, SDL, LADA, and LPV is required.
• Hands-on physical FA, such as silicon/package delayering, chemical etching, and cross-sectioning.
• Equipment knowledge of SEM/EDX, 3D X-Ray, SEM-based nano-probing, and AFP analysis.
• Strong problem-solving and communication skills.
• Proactive and able to work with minimum guidance.

ACADEMIC CREDENTIALS:

• Bachelor’s Degree in Electronics Engineering or equivalent.

LOCATION:

Singapore

Responsibilities:

1. Support Production system of LifeAsia and Integral Group

2. Program enhancements/developments related to Life Asia and/or group 400 system

3. Able to interact and coordinate efficiently with other IT Sections and within Core Application Team itself

4. Liaise with Web Application Team on Front-end applications on inter-related projects

5. Perform system analysis, design and system unit/integration testing

6. Prepare/update Technical Specifications and end user system job instructions documents

7. Liaise with external parties pertaining to system collaboration and system testing

8. Observe, maintain and comply with the KPIs, work instructions, guidelines, security controls, audit controls and governance set

9. Ensure quality deliverables, documentation and reporting for work assigned and performed

10. Sound experience in Life Insurance industry

11. At least 5 years hands-on coding experience in SMART 400 on AS400

12. Knowledge of both Life-400 and Group-400 will be an added advantage

• Assist the Operation Manager / Project Manager in coordinating site investigation project, planning of location, site clearances, scheduling.
• Obtaining land permission, utilities services clearances and meeting with stakeholders.
• Meeting and correspondence with Client on project timeline and requirement.
• Organizing of rigs & manpower resources for the site investigation work.

• Relevant degree/ diploma in Geology; Civil Engineering or the Built Environment.
• Familiar with Utilities Services Clearances procedure of various Agencies; and having RES/REO certificate is an advantage.
• Fresh Graduate are welcome

Salary: $2400-$2800+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience / fresh entry welcome to apply

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Degree in civil or mechanical engineering, expeienece in micro piling works, ground improvement works, jet grouting works, soil nailing, able to work day and night shift, taking care of site safety and prepare risk assesment (RA) based on job requirments. Assisting quanitity surveyour for tender and monthly progress claims.

Responsibilities:

1. Support Production system of LifeAsia and Integral Group

 2. Program enhancements/developments related to Life Asia and/or group 400 system

 3. Able to interact and coordinate efficiently with other IT Sections and within Core Application Team itself

 4. Liaise with Web Application Team on Front-end applications on inter-related projects

 5. Perform system analysis, design and system unit/integration testing

 6. Prepare/update Technical Specifications and end user system job instructions documents

 7. Liaise with external parties pertaining to system collaboration and system testing

 8. Observe, maintain and comply with the KPIs, work instructions, guidelines, security controls, audit controls and governance set

 9. Ensure quality deliverables, documentation and reporting for work assigned and performed

 10. Sound experience in Life Insurance industry

 11. At least 5 years hands-on coding experience in SMART 400 on AS400

 12. Knowledge of both Life-400 and Group-400 will be an added advantage

MITRE ASIA PACIFIC SINGAPORE (MAPS)

Under the initial sponsorship of Civil Aviation Authority of Singapore (CAAS), The MITRE Corporation, a U.S.-based, globally renowned research and development company, established its premier air traffic management research center in Singapore to support the growth in the Asia Pacific Region. This research center, MITRE Asia Pacific Singapore (MAPS), is in need of an Associate/Intermediate Data Scientist / Software Engineer to be part of a dynamic team of professionals working to improve air traffic operations in Singapore and the Asia Pacific region. The ideal candidate possesses excellent verbal and written technical communication skills, strong analytical abilities, the desire to acquire new skills, and the trait of being self-driven.

Key responsibilities include:

· Develop, maintain, and monitor data analytics that produce high quality data

· Analyze and visualize data products to derive insights and assess data quality

· Continuously improve the codebase and our development/deployment processes

· Consult with analysts and data consumers to ensure their needs are met

· Collaborate with peers during sprint planning, technical discussions, and code reviews

· Write clean and testable code that works consistently, both locally and on the compute cluster

Minimum Requirements:

• Good honours degree in in Computer Science, Mathematics, or other physical science/engineering fields), or equivalent practical experience

• 0-5 years relevant work experience

Preferred Qualifications:

• Experience with software development using Java, Python, and/or another high-level programming language

• Experience with data science techniques, data analysis, modeling, and visualization using Python, R, and/or Clojure

• Experience with Git version control software

• Familiarity with big data, distributed systems, and/or cloud platforms (Hadoop, AWS, Spark, Kafka, etc.)

• Familiarity with Agile and DevOps principles and practices

• Comfortable learning new languages and ideas

• Creative problem solvers and risk takers

• Ability to collaborate effectively with teammates, technical partners, and stakeholders

Fresh University graduates are encouraged to apply. Preference will be given to candidates who have knowledge of and/or experience in the field of air traffic operations. There is currently one opening. Interested candidates should inquire within The MITRE Corporation by emailing [email protected] by 25 April 2024.

Job Description
You will be a member of the Group Information Security Team responsible for initiating, implementing and maintaining security products and solutions to support enterprise security.

Key Responsibilities

• Subject matter expert (SME) for the security systems owned by the Information Security Team.
• Ensure security systems are utilised to their maximum capabilities.
• Plan, identify, assess, design, operationalise and maintain multiple security related software and/or hardware.
• Recommend and drive cyber security solution and initiatives to improve cyber security of the organisation.
• Prepare RFQ and evaluation criteria. Proof of concept (POC) during product evaluation. Liaising with vendors to implement security solutions.
• Provide security consultancy, technical guidance, expertise, solutioning and education.
• Advise infrastructure teams on security design that is relevant and fit for purpose.
• Identify and assess cyber risks in the IT infrastructure environment.
• Review firewall requests.
• Keep up to date on emerging security threats and vulnerabilities on new platforms adopted by the SIA Group and propose mitigating controls.
• Any relevant ad-hoc duties. Manage individual project priorities, deadlines and deliverables.
• This is an individual contributor role. Deliver tasks with minimal supervision.
• Strong communication skills.

Requirements

• Degree in IT or related field, with at least 5 years in information security, especially in the application security space.
• Professional security certifications (CISSP, CSSLP, CEH etc) preferred.
• Experience in security products POC and RFQ.
• Prior experience in implementing and maintaining any of tools for EDR, XDR, SOAR, SIEM, UEBA, PAM, AM etc. and/or network security. Able to review firewall requests.
• Technical proficiency in one or more of the following security areas: network design, zero trust, Internet of Things, cryptography etc.
• Familiar with common web/mobile application vulnerabilities and technical knowledge to address and mitigate vulnerabilities. Any prior vulnerability management experience preferred.
• Knowledge of cyber security threats, vulnerabilities, hacking and exploit methods etc.
• Strong oral, written, presentation and inter-personal skills.
• Possess positive attitude with drive, initiative, enthusiasm, and a keen sense of urgency in resolving high-priority issues.
• Able to work independently and in a team-oriented, collaborative environment.

Job Description

You will be a member of the Group Information Security Team responsible for ensuring that IT solutions (both applications and infrastructure) are developed and designed with security inbuilt.

Key Responsibilities

•Provide security consultancy, technical guidance, expertise, solutioning and education for en-terprise.

•Advise application and infrastructure teams on application and infrastructure security design that is relevant and fit for purpose.

•Align security architecture frameworks and standards with business strategies and functions. Maintain Cyber risk management framework and perform assessment of applications for emerging areas like cloud security, machine learning etc.

•Advise and review application security design to detect potential security issues and for each issue, propose and drive remediation tasks. Develop application security blueprints. Propose and/or develop training courses to advance developers’ security knowledge.

•Perform threat modelling on security critical applications. Keep up to date on emerging secu-rity threats and vulnerabilities on new platforms adopted by the SIA Group. Define scope and review the results of security tests, reviews and audits to ensure security assurance is achieved.

•Any relevant ad-hoc duties. Manage individual project priorities, deadlines and deliverables. This is an individual contributor role. Strong communication skills.

Requirements

•Degree in IT or related fields, with at least 5 years in information security, especially in the application security space.

•Professional security certifications (CISSP, CSSLP, CEH, CCSP etc) preferred.

•Technical proficiency in one or more of the following security areas: network design, zero trust, Internet of Things, cryptography etc.

•Strong in-depth working knowledge in secure application development techniques. Secure by Design. Secure source code review. Prior experience with any of the following tools: Static Application Security Testing (SAST), Dynamic Application Security (DAST), Software Compo-sition Analysis (SCA).

•Strong understanding of Agile, DevSecOps, OWASP Top 10, and securing cloud technolo-gies. Familiar with common web/mobile application vulnerabilities and technical knowledge to address and mitigate vulnerabilities.

•Knowledge of cyber security threats, vulnerabilities, hacking and exploit methods etc. Any prior vulnerability management experience preferred.

•Strong oral, written, presentation and inter-personal skills.

•Possess positive attitude with drive, initiative, enthusiasm, and a keen sense of urgency in resolving high-priority issues.

•Able to work independently and in a team-oriented, collaborative environment.

Job Overview: We are seeking a highly skilled and motivated Software System Safety Engineer to join our dynamic team. The ideal candidate will be responsible for ensuring the functional/ system safety of our products, software and systems, with a focus on compliance with relevant safety standards and regulations. As a Functional / System Safety Engineer, you will play a crucial role in identifying and mitigating potential safety risks, conducting safety analyses, and collaborating with cross-functional teams to implement safety measures throughout the product development lifecycle.

Key Responsibilities:

1. Safety Analysis:

• Conduct hazard analysis, risk assessments, and safety integrity level (SIL) assessments to identify potential safety risks associated with products and systems.
• Perform Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA) to evaluate the impact of potential failures on system safety.

2. Compliance and Standards:

• Ensure compliance with relevant functional safety standards, such as ISO 26262, IEC 61508, or other industry-specific standards applicable to the domain.
• Keep abreast of evolving safety standards and regulations to ensure continuous compliance.

3. Safety Requirements:

• Develop and define functional/ system safety requirements for products and systems, considering both hardware and software aspects.
• Collaborate with design and development teams to integrate safety requirements into the overall product development process

4. Documentation:

• Create and maintain comprehensive documentation related to functional safety, including safety plans, reports, and safety cases.
• Ensure that safety documentation aligns with industry standards and best practices.

Qualifications and Skills:

• Bachelor’s degree in Engineering or a related field.
• Proven experience in functional / system safety engineering, preferably in industries such as automotive, defense, or industrial automation.
• Familiarity with safety standards such as ISO 26262, IEC 61508, or equivalent.
• Strong understanding of safety analysis techniques, including FMEA and FTA.
• Experience with safety-critical systems and knowledge of hardware and software safety mechanisms.
• Excellent communication and collaboration skills.
• Experience in product development is a plus
• Experience in intelligent transportation and/or autonomous vehicle system development is preferred
• Certification in functional safety (e.g., CFSP) is a plus
• Knowledge in MIL-STD-882 and TR68 is a plus

Application Process: Interested candidates are encouraged to submit their resume and a cover letter highlighting their relevant experience in functional/ system safety engineering. Shortlisted candidates will be contacted for an interview.

MooVita Pte Ltd is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

No experience/Diploma in precision/mechanical/mechatronic/electrical/electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

We are searching for a detail-orientated, deadline-driven service engineer to join our growing company. The service engineer's responsibilities include repairing faults, servicing equipment, creating preventative maintenance strategies, and updating user manuals. You should provide friendly, efficient service at all times.

To be successful as a service engineer, you should be knowledgeable about machines and willing to accept constructive criticism. Ultimately, an outstanding service engineer will exhibit resourcefulness as well as superb active listening and troubleshooting skills.

Service Engineer Responsibilities:

• Using various strategies and tools to provide effective solutions to customers' concerns.
• Communicating with clients, engineers, and other technicians to ensure that services are delivered effectively.
• Promptly following up on service requests and providing customer feedback.
• Monitoring equipment and machinery performance and developing preventative maintenance measures.
• Conducting quality assurance and safety checks on all equipment.
• Delivering demonstrations to ensure that customers are educated on safe and effective equipment use.
• Providing recommendations about new features and product improvements.
• Monitoring inventory and reordering materials when needed.
• Conducting research and attending workshops to remain abreast of industry developments.
• Writing reports and presenting findings to Managers and Supervisors on a regular basis.

Service Engineer Requirements:

• An associate's degree in engineering or similar.
• A bachelor's degree in engineering is preferred.
• A relevant certificate or license is advantageous.
• A valid driver's license and willingness to travel.
• Excellent active listening and customer service skills.
• The ability to deal with multiple requests without being overwhelmed.
• The ability to remain professional under pressure.
• Superb work ethic and a growth mindset.

Job Description & Requirements

Degree/ diploma in Civil Engineering/ Building Steel Structures and/or

related experience prefered

Liaise and coordinate with consultants, main contractor

Resolve all engineering, technical and project queries from time to time

Any other ad-hoc duties assigned related to project

• Perform drawing and design work using BIM (Building Information
  Modelling).
• Coordinate and prepare design documentation for Civil & Structural
  engineering projects.
• Performing building/site inspections.
• Attend progress meetings
• Degree in Civil Engineering from local or recognized foreign universities, preferrable to be recognized by Singapore Professional Engineering Board.
• Prior work experience in civil/structural firm environment is advantageous.
• Fresh graduate with good results is encouraged to apply.
• Proficient in AutoCAD and BIM
• Possess Class 3/3A driving license preferred.
• Singaporeans preferred.

Please include the following information in the resume
1. Reasons for leaving current and/or last employment
2. Last drawn and/or current salary in Singapore Dollar
3. Expected salary in Singapore Dollar
4. Date of availability and/or Notice Period
5. A current photograph

Civil Engineer (indoor office-based job)

Salary up to $5200

• To take charge of the Ducts and Manholes Implementation and Maintenance Works.

• To coordinate underground ducts and manholes implementation works with external parties.

• To support Plant Maintenance and Operation on Civil & Structural (C&S) matter

• C&S engineering SME

Responsibilities:

• New Development and Diversion of Services:

- Take charge and coordinate Service laying with main project team (Developer, Main Contractor) and authorities, including deconflicting with others for new build and diversion.

- Project Manage the implementation of underground ducts and Manholes within new development and service diversion.

- Review method statement and coordination drawings and other relevant construction documents.

• Review 3rd party submission on matters related to Netlink Underground Services

• Support Facilities and Maintenance team on Civil & Structural related issues.

• Participate in tender, contract administration

Requirements:

• Civil Engineering Degree with 3-year engineering/construction experience

• Diploma holders in Civil Engineering with extensive relevant experience will be considered

• Experience in infrastructure (Road works) projcts and its geotechnical aspects.

• Exposure in Service coordination with Authorities and Service providers

• Good understanding of Specifications, contracts and ability to read and interpret engineering drawings and engineering reports.

• Ablity to review Method statement. Ability to generate method statements is preferred.

To apply:

Please email Resume in Microsoft Word format

Please state your Position/ positions applied on the “on TOP” of your resume.

Please state Available Commencement Date or notice period

Please state current and last SALARY and Expected Salary in your resume.

Please state Reasons for leaving current & previous Employment.