* Reporting directly to the manager and fulfilling the Manager's duties in their absence.

* Being well-versed in internal operations.

* Taking minutes at meetings.

* Forwarding and distributing mail as required.

* Preparing and filing relevant documents.

* Supporting managers in devising plans in order to improve business performance.

* Monitoring various operational aspects.

* Collaborating with the logistics office.

* Assigning tasks to employees and hiring new staff.

* Providing training, instruction, and guidance to subordinate employees to ensure their knowledge of company products, fabrication and assembly methods, management skills, and the effective use of accepted work processes and standards.

a) Administrative function such as data entry, typing, faxing, filling, attending to telephone calls, managing email account & etc.

b) In addition to the duties specified above, you are obliged to follow all reasonable instructions of the Employer, the management of the Employer, or the designated superior.

c) The Employee shall not be entitled to do any private work whatsoever or be a party thereto without the written approval if the Employer I fit interferes with his employment with the Employer or the proper and diligent execution of duties.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Specialising in Facilities Maintenance
• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Facilities Management, Building Services, Engineering (Civil, Mechanical or Electrical) or equivalent.
• At least 5 Years of working experience in the related field is required for Executive position and at least 10 Years for Manager position.
• Required Skill(s): Microsoft Office
• Preferably Senior Executive specialized in Engineering - Civil/Construction/M&E/Facilities Maintenance or equivalent.
• Preferably candidates with valid Class 3 Driving License (M)

• Able to handle full range of quantity surveying work including measurement, estimating & tendering, procurement and contract/sub-contracts administration cost & budget control.

• Subcon payment, progress claim, cost control and etc.

• Performed quantity take-off, progress claims, variation orders and preparation of letter of award.

• Any other job related adhoc duties as assigned by HOD.

Job Description

• Assist the Building Manager in the daily operations managing and maintaining daily site operations to ensure all works adhere to legal regulations
• Manage and liaise with contractors for repairs of facility and equipment
• Conduct regular daily checks and inspections on grounds to ensure effective management of the facility, common areas
• Monitor service contractors and sub-contractors working on site
• Ensure all preventive maintenance works are carried out according to the prescribed checklist and schedule
• Source for quotations and recommend to award maintenance work to the competent service provider
• Ensure full compliance under the building statutory requirements
• Prepare monthly reports
• Process & co-ordinate tenancy fit out/additions & alterations/reinstatement work
• Upkeep and maintain fitting out manual and building records
• Perform any other duties as assigned

Job Requirement

• Diploma in Real Estate/ Facilities Management /Building Services /Engineering or relevant working experience
• 2 years of relevant working experience in Facilities Management
• Fire Safety Manager (FSM) Certificate would be added advantage
• Able to start work immediately or with a short notice period

Job description

• Create opportunities at the early stages of the design process to enable products to be specified.
• Generate leads from consultant engineers, architects and government bodies and secure maximum product specification in line with the Company’ sales plan.
• Provide specification support to the sales department for ongoing contracts when required.

Responsibilities

• Call on Consultant Engineers, Architects, Government Departments and Client bodies to allow products to be specified.
• Liaise closely with the sales team when calling on prospective customers at the pre tender stages in order that a product submission can be made.
• Introduce new products to major Contractors, Consultant Engineers, Architects and Client bodies
• Produce and deliver technical presentations.
• Produce and deliver product training presentations to staff or clients.
• Participate in the monthly sales meetings in support of the BPM processes.
• Compilation of reports and forecasts as required. Including project pipelines and Sales Action Plans.
• Develop and implement specification plan that is aligned with the Group Strategic Goals specifically in terms of growth and market share. To feed into the 5 year rolling Business Plan.
• Awareness of competitors activities and identify relevant threats and opportunities.
• Perform any other duties assigned by immediate superior, Regional Head of Commercial, or Vice President

Skills required

• 3 years working experience as a Specification/Sales Manager in the Building and Construction industry.
• 5 years' experience managing and promoting high specification industrial products.

Educational requirements

Civil Engineering qualification or appropriate experience

• Position : BIM Modeller (Architectural & Structural/Up to $5000)
• Location : Central - Jervois Road
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $5000 + Variable Bonus + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Civil Engineering & Construction

Main Responsibilities:

• Assist Architectural / Structural Coordinators in creating, updating and revising BIM models throughout the project lifecycle
• Create and update BIM models based on contract drawings and latest information
• Ensure on the integrity / quality of the models
• Generate documentation and shop drawings for BIM models
• Produce BIM model deliverables for construction, documentation and fabrication
• Develop BIM models with the correct parameters and attributes for BIM based qualification and 4D simulation
• Identify issues for BIM Coordinators where discrepancies occur during design stage

Requirements:

• Diploma in Architecture / Civil Engineering or equivalent with at least 2 years experience in civil & structural, architectural BIM models related projects
• Well versed in REVIT Able to complete models, shop drawings in timely and quality manner
• Knowledge in Revizto, Synchro 4D, Bently Open Building Designer will have an added advantage
• All with experience are welcome to apply
• WORK PASS APPLICANTS NEED NOT APPLY

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• To assist the Project Manager or Project Engineer in the daily execution of work;

· Inspecting construction sites regularly to identify and eliminate potential safety hazards;

· Enforcing site safety rules to minimize work-related accidents and injuries;

· To supervise the work of sub-contractors and in-house workers;

· To work closely with other site operations staff to meet the project schedule;

· Ensure installation is carried out as per construction drawings;

· To monitor the progress and quality of work being performed by workers;

· Ensure that works are executed within an acceptable standard of workmanship;

· Attend the daily tool-box meeting and convey clear instruction accordingly;

· Understand and ensure compliance in project requirement and scope of work.

Experience Working in Oil/Petrochemical Industry

Able to Hands on For Various Civil & Structural Works

Able to Carry Out Design & Calculation For Civil & Structural Steel Works for Client Approval

Handling Group of Workers to Execute the Job

Meeting with Clients for Specifications

Coordination & Site Construction Experience is the Key for the role

Able to use Autocad will be + Point

Assisting in Data Entry For Accountant

Assisting in Payroll

Scanning and managing of documents

Application of Passes / Courses

Arrange for Meeting / Appointment

Application / Renewal of Work Permit

Manage Dormitory Requirements For Workers

Contact with Clients for information

Following up of Invoices / Payment on Behalf of Accountant

· Assist Project Manager to lead, monitor and inspire the whole site team.

· Plan and monitor construction process. Plan site layout and logistic to ensure smooth flow of construction materials. All planning and organizing of construction activities shall cover and take into consideration progress, safety, environmental, quality and cost effectiveness.

· Monitor and report to Project Manager of project details such as progress, resources requirement, risks and potential issues and lapses.

· Be responsible for implementation of the scope of works in conformance with project specifications, drawings and in accordance with the approved Project Schedule.

· Work closely with consultants and coordinate activities of various trade sub-contractors and specialists to ensure smooth site operation.

· Comply with company’s ISO and GGBS requirement and assist WSHO / ECO for external auditing exercise.

· Any other instructions which may be assigned to you by the top management from time to time

Job Description & Requirements

• Lead and manage a team of QS in the administration and review of procurement and contract management
• · Responsible and lead the team on evaluation and preparation of sub-contractors' claims and issuance of payment response within stipulated timeframe (SOP Act)
• Allocate tasks to QS and provide effective supervision
• Review contract documents and provide cost estimates on tenders
• Oversee and manage main contract progress claim and subcontract payment including variation claim
• Resolving contract disputes and contract claims, assessing entitlement for extension of time and loss/expense claim
• Oversee the management of document control and distribution of drawings, specifications, and all other relevant documents.
• Communicate contract-related information to all stakeholders
• Ensure proper documentation of additional works, alterations or design changes, and lead the team in preparing variation orders
• Advise and administer Extension of Time claim
• Ensure timely finalisation of main contract and subcontract
• Prepare and monitor project cost budget, cash-flow for project, track changes in design/construction work, variations and adjust budget projections accordingly
• Able to independently lead and manage project

Requirements

• Bachelor’s Degree in Quantity Surveying / Construction Management / Civil Engineering or equivalent
• Minimum 8 years relevant experience in project tendering, contract negotiation, administration and/or management
• Excellent communication and negotiation skills, analytical mindset, problem solving abilities

Key tasks and responsibilities

· Responsible for all onshore and offshore construction activities relative to the part (or full) of the FPSO construction, defined based on discipline (e.g. Structure / Piping / EIT) or area (e.g. specific module(s) / Engine Room / LQ / Turret)

· Ensure that all construction related tasks are undertaken to the required standard and performed in a safe, productive manner (compliance with all statutory or legislative requirements related to OH&S, environment, etc.)

· Coordination of onshore and offshore sub-contractors, incorporating HSSEQ requirements into the construction planning and execution

· Interface with Engineering, Supply Chain and Project HSEQ to ensure timely deliverables to support the Construction Schedule, and assist in reviews of design specifications, shop drawings and contractual requirements

· Preparation of progress reports and reports related to safety and environmental hazards, near misses and accidents

· Ensure innovation and continuous improvement for the project works, through the development of information, practices and procedures

· Act as a resource for of new employees and less experienced colleagues and consultants

· Assist in the identification and preparation of construction related change orders

· Assist as required, in arranging for work permits, JSA’s, safety tests and actions with regard to safety

· Perform NDT inspection when required

· Follow up with engineering department in order to evaluate the construction drawings issued

· Work as BWO focal point at onshore sub-contractors’ facilities accompanying fabrication

· Cover offshore construction supervisors’ vacation

· Offshore embarks when needed

• Goal-setting responsibilities. ...
• Training and development. ...
• Administrative tasks. ...
• Team and individual organization. ...
• Leadership. ...
• Communication. ...
• Time management. ...
• Reliability.
• planning, organizing, staffing, leading and controlling.
• shaping the work environment, setting strategy, allocating resources, developing managers, building the organization, and overseeing operations

Exhibit designer job description

key responsibilities for all exhibit designer roles include:

Liaising and planning exhibits with clients

Many exhibit designer jobs involve working directly with clients to make their vision a reality. The designer works directly with internal marketing or sales teams to identify their needs and understand their requirements to achieve their goals.

Working with a design team to brief and create concepts

Creating sketches and models for design

Creating initial sketches and more polished 3D models and 2D designs

Produce technical drawings for construction and development

Produce specifications for their design and technical drawings before going on-site for the final build.

Working alongside a wider creative or marketing team

Sourcing and working with suppliers and specialists

Supervising construction and installing on-site

On-site providing guidance and ensuring standards during construction and installation

Providing adjustments and reworks as and when required

New drawings and concepts may reuse or recycle existing structures or design elements.

construction worker , working at construction site, do the structural , timber work , erecting and breaking up scaffolding , ramp etc. with attention to safety. Unloading and carrying material at construction site .

Requirements: Proven experience as construction worker . Experience in operating equipment like trench rammers , drills, pneumatic hammers. Knowledge of mixing and pouring constructin material ( concrete, sand, grout etc. ) Knowledge of basic engineering and construction principles and methods

Key Responsibilities

• To handle the entire process from taking the brief, working with the design team, and installing the exhibition stand, supporting the client throughout this process
• To meet with prospective clients, present the organization’s credentials, and take detailed briefs
• Working with Existing and sourcing new Clients to understand their ongoing requirements and up sell accordingly.
• Coordinating with the relevant departments for design and costing
• Agreeing timescales and budgets with clients
• Monitoring and chasing work progress
• Analyzing, interpreting, and presenting results when necessary
• Delivering ideas and final products/services to clients for review
• Managing a portfolio of accounts
• Using an existing network of exhibition industry contacts to generate new business leads
• Achieving and exceeding sales quarterly targets
• To ensure you have a healthy sales pipeline with a minimum of 20 pending clients throughout
• Filling in weekly activity reports within a timeframe suitable to management
• Completion of all internal paperwork to ensure the smooth running of office systems.
• To source new clients through telemarketing, show marketing, networking, and referrals
• To manage the entire process from taking the brief, working with the design team and installing the exhibition stand, supporting the client throughout this process
• To understand and work closely with technology agencies for specific interactive technology solutions

Required Skills/Abilities:

Personal

• Self-starter, able to work independently with minimum supervision.
• Highly organized with the ability to work under pressure to tight deadlines
• A natural flair for building relationships with people on every level.
• Great communication skills and the ability to think quickly and clearly under pressure.
• Quick learner with a willing attitude and the ability to respond to a constantly changing environment
• Excellent written and verbal communication skills in English
• Flexible to work longer hours if required

Technical

Computer literate, ability to use Word, Outlook, PowerPoint, and Excel

Education and Experience:

• A-Level/ O level minimum qualification level
• Previous experience in account handling/sales for an exhibition-related business would be an advantage, but not necessary
• Driving license (optional)

Possess any ONE of the following recognised qualifications:

• WDA Employability Skills System Level 5 in Literacy and Numeracy (WPLN 5)
• 2 GCE O levels in English (G1-8) and Mathematics (G1-8) 2 GCE N levels in English(G1-5) and Mathematics (G1-5)
• CITI Advanced Builder Certificate
• National Building Qualification(NBQ) in Project Supervision
• Construction Trade Foreman Certificate

Possess any ONE of the following recognised qualifications:
University Degree or equivalent; or
Polytechnic Diploma or equivalent

Min years of construction related experience

5 years for Degree holders and Diploma holders

Complete CONQUAS training workshop for Developers/Consultants/Builders or customised CONQUAS training workshop and also a registered BCA Conquas Supervisor

ACCOUNTS ASSISTANT

Construction, Bukit Batok

5.5 alternate Saturday

Account Assistant play a crucial role in supporting the financial operations of construction projects.

This position involves assisting with various accounting tasks, maintaining accurate financial records, and ensuring compliance with company policies and procedures.

The ideal candidate will have strong numerical skills, proficiency in accounting software, and the ability to work effectively in a fast-paced environment.

Responsibilities:

• Assist with accounts payable and accounts receivable processes, including invoice processing, billing, and collections.
• Reconcile vendor statements and resolve any discrepancies in a timely manner.
• Maintain accurate financial records and documentation for construction projects.
• Assist in preparing financial reports, budgets, and forecasts for management review.
• Coordinate with project managers and subcontractors to ensure timely and accurate invoicing and payments.
• Assist with payroll processing and employee expense reimbursements.
• Monitor project expenses and track budget variances.
• Assist in preparing and submitting financial documentation for project bids and proposals.
• Collaborate with the finance team to implement and improve accounting procedures and controls.
• Provide administrative support to the finance department as needed

Requirements:

Previous experience in construction accounting or related industry preferred.

Strong attention to detail and accuracy in data entry and financial calculations.

Ability to prioritize tasks and meet deadlines in a fast-paced environment.

Knowledge of accounting principles and procedures.

Ability to maintain confidentiality of financial information.

Flexibility to adapt to changing priorities and responsibilities.

Positive attitude and willingness to learn and grow within the organization.

Accounts Administrator responsibilities include:

• Managing obligations to suppliers, customers and third-party vendors
• Processing bank deposits
• Reconciling financial statements

Responsibilities

• Manage obligations to suppliers, customers and third-party vendors
• Process bank deposits
• Reconcile financial statements
• Prepare, send and store invoices
• Contact clients and send reminders to ensure timely payments
• Submit tax forms
• Identify and address discrepancies
• Report on the status of accounts payable and receivable
• Update internal accounting databases and spreadsheets

Requirements and skills

• Proven work experience as an Accounts Administrator or similar role
• Good knowledge of bookkeeping procedures and debt collection regulations
• Hands-on experience with accounting software
• Advanced knowledge of Excel (using financial formulas and creating spreadsheets)
• Solid data entry skills with an ability to identify numerical errors
• Good organizational and time-management abilities

• Min 2 Years relevant working experiences
• Willingness to work in non-climate-controlled conditions (heat, cold, outdoors)
• Ability to lift heavy materials and equipment
• Excellent customer service skills.
• Carpentry and renovation experience a plus.

Roles & Responsibilities

Job Description

• You will be working closely with Departments to manage reports and coordinate internal work
• Provide office support and ensure smooth information flow and communication among various internal and external stakeholders
• Generate detailed reports and data
• Outreach to vendors for business procurement related matters
• Forecast business related budgeting and costings
• Conduct relevant audits and reports tracking
• In charge of General Administrative duties and office maintenance matters
• Any other ad-hoc tasks as assigned

Requirements

• Able to work independently in a fast-paced environment
• Able to communicate effectively with various departments

Our specialization of recruitment includes: Local/Malaysia, India, Bangladesh, Myanmar, Philippine, and PRC (China).

We provide workers from all sectors such as Construction, Marine, PCM, Manufacturing, Landscape, Service, etc.

In construction sector, we provide workers with Eligible Experience, Core Trade, Multiskill, or even R1/Fresh workers. Worker Recruitment includes Welder (3G/4G/6G), Fitter, Plumber, Carpenter, Painter, Electrician, Air con technician, General worker, Driver cum Construction worker, and any kinds of specialties.

We also provide civil engineer, M&E Engineer, Electrical Engineer, Safety Coordinator, Safety Officer, Safety Manager

In administrative sector, we hire office staff (clerk, admin cum hr, admin staff, accountant, admin cum accounts, admin assistant, account assistant, etc), Engineer, Quantity Surveyor, CV surveyor, etc

Our licence covers Local, Foreign Worker Employment, and Maid Agency so feel free to contact us if you have any queries regarding our services.

• Min 2 Years relevant working experiences
• Willingness to work in non-climate-controlled conditions (heat, cold, outdoors)
• Ability to lift heavy materials and equipment
• Excellent customer service skills.
• Carpentry and renovation experience a plus.