Job Description

• Responsible for maintenance and repairs for all properties in the group (residential and commercial).
• Troubleshoot mechanical/electrical systems and making corrective actions to solve issues.
• Source for comparative vendors/contractors to carry out maintenance/repair work.
• Coordinate and supervise maintenance activities to ensure contractors/vendors and technicians complete all repair and maintenance work within the required timelines and standards.
• Hands-on repair for minor rectification works.
• Provide guidance to new tenants on building fit-out procedures, vet tenant's design and M&E submission and be responsible for hand-over of property by tenant and follow up of defects identified.
• Oversee and check the daily operations of Security, Housekeeping and general maintenance of the commercial buildings, as needed.
• Liaise with tenants regarding repairs and maintenance, when necessary.

Key Competencies and Qualifications

• Takes initiative
• Meticulous, can work independently, willing to learn
• Good interpersonal, communication and leadership skills
• Good problem solving skills
• A flexible and dependable team-player
• Diploma level
• Minimum 5 years related experience

JOB RESPONSIBILITIES

• Planning and overseeing the construction operations of a project Conducting
• Site layout
• undertaking surveys
• setting out sites
• Work schedule
• Managing equipment & materials at site
• Organizing the workers
• Safeguarding the environment
• Checking and modifying plans and specifications for constructability, efficiency, and safety
• Developing cost estimates and preparing bids
• Managing subcontractor firms
• Preparing site reports and filling in other paperwork
• Working with the owner to ensure that the project meets requirements
• Solving job site technical problems, moving between the field and office
• Gaining additional education and training
• Skilled in Using of Autocad, MS office, ability to prepare schedule in MS Project

JOB REQUIREMENTS

1. Bachelor Degree in Civil Engineering / Equivalent
2. Experienced in Construction Site
3. Sound knowledge of Engineering, construction, and design.
4. Great leadership and organizational skills.
5. Great written and verbal communication skills.
6. A willingness to learn.

Responsibilities:
Preparation of precast shop drawings for precast concrete components, steel mould and RC Structures

Produce layout plans, and shop drawings of precast concrete elements for production and submission to clients

Involves in estimating project materials and cost

Coordinate and liaise with clients and consultants on details and discrepancies for architectural, structural and M&E drawings

Requirements:
Degree/Diploma in Civil/ Structural Engineering

Responsibilities

· Overseeing project quality plans.

· Coordinating with all trade team for Structural Work in both design and construction stage.

· Understand the interfacing work of MEP and Architectural Work with Structure.

· Handle any other ad-hoc duties and tasks assigned.

· To lead site construction team in ensuring smooth execution of work.

· Day to day management of the site, including supervising and monitoring the site labour force and the work of any sub-contractor.

· Liaising with authorities, clients, sub-contractor, and consultants to resolve any commercial and contractual matters.

· Check and create MOS & RA

· Resolving technical problems/ difficulties that may arise on site.

· To ensure proper handover of project to client.

· Any Ad-hoc duties required.

Requirements

· A Degree in Civil and Structural Engineering with preferably experience in LTA projects.

· At least 5 years of relevant experience.

· Good analytical and problem-solving skills

· Possess good interpersonal and communication skills.

· Possess with relevant safety certificate.

Key Responsibilities

Underwriting and Business focus:

· Underwrite profitable facultative Property business

· Operate in accordance with the marketing objectives, strategies and plans developed by the Singapore/SEA Property Facultative Team and Product Centre

· Provide high quality, timely and appropriate underwriting service to clients, in keeping with underwriting authorities and Corporate Governance Rules

· Contribute to robust new business pipelines and manage renewal to maximise the Company commercial position and pricing adequacy

· Diligent use of pricing/modelling tools and robust reflection of pricing to exposure and risk quality

· Proactively improve data transparency and accuracy

· Provide underwriting support to other Swiss Re offices, if required

· Provide high quality, timely and appropriate underwriting service to clients and brokers

· Develop and implement facultative reinsurance solutions for our clients

· Demonstrate robust capability in formally preparing for and conducting quality meetings with clients to identify business opportunities

· Actively seek and procure opportunities in the market through high quality client and broker interactions, relationship building and engagement

· Positively contribute to Swiss Re's reputation, profile, and brand

· Support client relationships between appropriate SRAL staff and client staff across the range of reinsurance related functions

· Participate in cross functional team initiatives

· Proactively liaise with the Claims Team to stay abreast of claims trends and issues of the market/client companies and their profitability

· Participate in project teams as required

· Ad hoc tasks as needed

SwiftRe® responsibility:

· Develop a profitable, diversified and highly automated SwiftRe® portfolio, improve efficiency and automation within the underwriting control framework

· Steer the SwiftRe® portfolios for profitable growth, contribute to underwriting parameters setting, optimizing automation, response time and underwriting control

· Promote SwiftRe® propositions, develop new partners, expand into new territories, and deepen penetration in existing markets and partners

· Become SwiftRe® product expert and first port of call to clients and internal cross-functional teams in any SwiftRe® matter

· Ensure timely response to clients, manage daily referrals (jMetro), provide coaching to clients, and support SwiftRe® on/off-boarding

Knowledge & Skills

· Knowledge of industrial and commercial property underwriting: all classes of insured risk, contractual details/setup

· 5 years or more of relevant costing/pricing experience for complex risk and up-to-date with insurance and reinsurance products

· Market knowledge as underwriter/broker, preferably in Southeast Asia; experience in other emerging markets will be considered

· Completed ACII qualification is an advantage

· Comfortable working in a highly collaborative, multi-cultural matrix organisation

· Taking ownership, accountability; going the extra mile to get things done, both internally and externally

· Delivering superior service to our clients/brokers

· Ability to learn and deliver under pressure

· At ease with going outside of own comfort zone

· Strong team player

· Effective communicator, both written and verbally

· Efficient and pragmatic

Responsible for directing, coordinating, planning and overseeing tasks and operations within an organisation involving transportation activities.

Directing activities related to dispatching, routing, and tracking of transportation vehicles, aircraft, or railroad

cars.

Planning, organizing, and managing subordinate staff members to ensure work is completed and consistent with the company's standards.

Directing investigations to verify and resolve customer or shipper complaints.

Collaborating with staff members to formulate and implement transportation-related procedures as well as company revenue goals and customer service objectives.

Arranging repairs and routine maintenance of transportation vehicles.

Complying with transportation-related policies, as well as safety rules, union contracts, and government regulations.

Promoting safe work activities by conducting safety audits, and attending company safety meetings.

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings, material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of E&M work in construction site for projects of similar scale and complexity.

· Able to work independently and supervise construction work.

· Min. Diploma candidates preferred.

· At least 2 years experience with relevant field

· Knowledge of Microsoft Word, Microsoft Excel.

· Assist site supervisor with daily operation

· Liaising with main contractor for coordination work.

· Supervise and monitor subcontractor work and progress.

· Report to Project Director / Project Manager.

· Any other duties as assigned by the Project Director / Project Manager.

· Monitoring employee productivity and providing constructive feedback and coaching.

· Setting goals for performance and deadlines in ways that comply with company's plans and vision.

· Organizing workflow and ensuring that employees understand their duties or delegated tasks.

· Coordinate subcontractors and manage their activities on site.

We are looking for an experienced Accounting Assistant Manager with expertise in the construction industry to oversee our financial operations and ensure accuracy, efficiency, and compliance. The ideal candidate will have a strong background in accounting principles, financial analysis, and management, with a deep understanding of construction accounting practices.

• Maintain books of accounts for all companies under the Group.
• Posting of all accounting entries related to income, expense, and journals as required.
• Oversee and maintain cash flow.
• Review the system for invoicing, tracking payments, and aging analysis of outstanding AP/AR.
• Ensure good practice in recording and filing expenses.
• Maintain the ongoing reconciliation of bank and cash accounts, ensuring that the books are balanced.
• Ensure inter-company accounts are balanced and reconciled.
• Oversee year-end procedures – accruals, prepaid, receivables, and payables; any other journals as required.
• Financial year-end preparation of accounts for audit. Liaise with Auditors to ensure clean signoff. Follow up on closing any audit gaps.
• Initiate tax planning, and GST reporting and oversee periodical tax filings
• Work closely with the respective business units to ensure accurate and timely reporting.
• Ensure the integrity and accuracy of the Group consolidation
• Prepare monthly, yearly, ad-hoc, and consolidated reports.
• Suggest process improvement of in-house system or automatizing processes and procedures.

Job Requirements

• Degree in Finance, Accountancy, or equivalent.
• At least 5 – 7 years experience of accounting experience.
• Prior knowledge of QuickBooks Accounting System will be an added advantage.
• Experience in handling full-set accounting and annual audits.
• Independent and responsible personality
• Preferred to be bilingual due to work requirements.

Roles & Responsibilities

• To monitor and supervise sub-contractors work progression according to shop drawings, method statements, materials, and samples.
• To liaise and work with relevant authorities, sub-contractors, or clients on shop drawings, materials, and samples.
• Carry out work scheduling, material requisition, cost control, and project supervision to ensure compliance with regulations and project requirements.
• Document and manage the technical datasheets, specifications, and all piping-related documents.
• Liaise with clients, consultants, sub-contractors, vendors, and suppliers to ensure smooth progress of works.
• Identify challenges, mitigate risks, and ensure that safety regulations are being compiled on-site.
• Prepare inspection reports for material & site installation inspection.
• Attend site coordination meetings when necessary.

Job Requirements

• Preferably candidate with 5 years of relevant working experience in the Construction Industry.
• Knowledge of AutoCAD/BIM/Revit would be an advantage
• Proficient in Microsoft Office.
• Ability to work independently and target-oriented in a fast-paced environment.
• Ability to interact effectively with project teams and managers at all levels.
• Will be based at the project site office.

Roles & Responsibilities:

Director of Property Development

This role is a key member of the property development business and reports directly to the Board and/or Chairman of the Board. The candidate should have proven end-to-end property development experience.

Main responsibilities:

(i) implement policies laid down by the Board and translate them into operational plans and day-to-day directives.

(ii) manage and administer the property development business and affairs of the Group on a day-to-day basis.

(iii) keep the property development business operations of the Company under constant review and present to the Board periodic statements, accounts, reports, and statistics showing the progress and performance of the Company (including the Group Companies).

(iv) challenge and contribute to the development of strategy and make plans for the future development and growth of the Company.

(v) scrutinise the performance of management in meeting agreed goals and implement changes in the Group's organisation structure and in the allocation of the responsibilities that may be required to provide for growth and changes in activities, the business environment, and personnel of the Company;

(vi) maintain and develop good relations with the governmental agencies of any country in which the Company has or will have operations therein, provided that the Employee shall at all times be subject to the control of the Board and comply with such policies and decisions as may be determined by the Board from time to time.

Knowledge & Experience:

(i) Master’s degree or bachelor’s degree holder or related discipline.

(ii) At least 12 years of relevant experience.

(iii) Ability to work in a fast-paced environment, multi-task, and deliver within tight deadlines.

(iv) Strong knowledge of local law and compliance requirements

(v) Possess good interpersonal skills, confidence, working attitude, and leadership skills.

(vi) A team player who is independent and able to work under pressure.

• Aid management with administrative tasks such as tracking and compiling information of interest
• May handle confidential information
• Create and maintain filing systems, both electronic and physical
• Manage accounts and perform bookkeeping
• Prepare various reports detailing the administrative information handled by the position
• Review and answer correspondence
• Coordinate travel for department or individuals
• Answer phones and greet visitors
• Schedule appointments and maintain calendars
• Prepare communications, such as memos, emails, invoices, reports and other correspondence

Job Description :

1) Analysis and design of civil structures covering both structural and geotechnical (Bridge design/Drain Design/Slope Stability analysis/ Settlement calculation/ Temporary Steel Structure design/ Soil parameter evaluation etc.)

2) Ensure all engineering works comply with all relevant statutory standards, regulations and codes of practice.

3) Assist team leader to achieve set target without compromising quality standards of design and supervision works.

Job Requirements:-

1) Bachelor degree of Engineering in Civil and Structural/Geotechnical Engineering

2) Well-versed in civil and structural design software e.g. Staad Pro/GeoStudio/Plaxis/HECRAS/Auto CAD

3) Contract duration of 2 years

Job Description:

• Preparation of the construction schedule using software such as Microsoft Project
• Preparation of the power point slide for monthly meeting with client/consultant
• Preparation of the relevant documents such as Method statement, Daily/Weekly/Monthly report, RFI, Shop Drawings/As-Build Drawings etc
• Conduct the meeting with clients/consultant/sub contractor etc
• Quantity calculation of the site progress and structural work etc

Job Requirements:

• Bachelor degree of Engineering in Civli Engineering with minimum 5 years of relevant experience
• Well-versed in software e.g. Microsoft Project/Auto CAD/Civil 3D/Microsoft Word, Excel, Powerpoint etc
• Contract duration of 2 years

Duties & Responsibilities:

• Report and provide assistance to QAQC Engineer & Senior Inspector
• Inspection of the completed tunnel precast elements
• Keeping of Quality Control (QC) records at all stages of the segmental tunnelling lining production
• Testing and examining the materials used
• Checking on the workmanship of the manufacturer in connection with the tunnel precast elements production
• Inspect and checking of defects of production phase of tunnel precast elements and provide finding and recommendation on remedial measures to mitigate the defects

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 3 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products with precast yard experience.

Roles & Responsibilities

• Responsible for assuring the implementation and compliance with the Quality Assurance System.
• Control and monitor all activities related to Quality Management System (QMS).
• Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents
• Responsible for the quality and workmanship of every activity, through knowledge of all phases of engineering construction relating to Civil, Architectural and Structural discipline interfacing the multidisciplinary operations.
• Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.
• Carry out Internal Audit at the site as scheduled in the Project Quality Plan, PQP
• Liaise the Technical Engineer for submission of material submittals to Consultant
• Other ad-hoc duties assigned by Senior Manager (QA/QC).

Requirements:

• A Civil Engineering Diploma recognized by the Professional Engineer (PE) Board, Singapore, or its equivalent as accepted by the OIC
• Min. 4 years of relevant experience in the inspection and quality control monitoring of high quality, mass produced precast concrete products with precast yard experience.

• Oversees all M&E construction activities on site, reporting directly to the Project Manager.

• Manages construction progress autonomously, ensuring adherence to M&E drawings, specifications, and requirements.

• Maintains control over project schedules, overseeing site staff, workers, and subcontractor performance.

• Manages materials, tools, and equipment procurement and delivery.

• Attends project meetings to provide progress updates and ensures alignment with project objectives.

• Ensures discrepancies in drawings are resolved with consultants before site progress.

• Prepares and maintains Project Construction Plan, site access plan, hoisting plan, and temporary utilities plan.

• Implements quality control measures through inspections and completion/pre-handover assessments.

• Verifies materials used meet specifications and certifications.

For interested applicants, kindly send your resume in Word/PDF format

Kindly include the following in your resume.

Current Salary

Expected Salary

Availability

Reason for leaving

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (23S1595/R23116355)

Job Responsibilities:

• Develop detailed drawings and layoutplan, using computer-assisted drafting(CAD) equipment in accordance to specification provisions.
• Maintain and record masterlist of drawings to ensure accurate information.
• Review and analyse specifications,sketches, drawings, and interrelateddata to evaluate factors affecting designs, procedures and guidelines.
• Draft detailed scale plans for Archi/C&S/M&E works, based on preliminaryconcepts, sketches, engineering calculations, specification sheets andother data to ensure compliance with design requirements.
• Modify and revise designs to correctoperating deficiencies and clarity of design intent.
• Responsible for preparing and producing shop drawings, as-builtdrawings and/or construction drawings in accordance with engineers’ requirements.
• Perform other duties as assigned.

Requirements:

• At least 5 years working experience in leading consultancy/construction companies.
• Preferably with a Diploma in CivilEngineering and above or equivalent.
• Experienced in design management,steel structure detail, design development.
• Competent in Microsoft suites andproficient in AutoCAD, Civil 3D, BIM.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

• Managing the planning and design stages of construction projects.

• Contributing technical expertise to project drawings and designs.

• Performing cost calculations and preparing financial projections.

• Preparing work schedules in collaboration with the project manager.

• Liaising between contractors, subcontractors, vendors, and suppliers.

• Overseeing construction engineering processes.

• Performing regular tests on materials and procedures to ensure compliance with industry regulations.

• Ensuring that the construction project is completed on time and within budget.

• Documenting processes and keeping detailed construction logs.

• Presenting construction project progress updates to clients and senior managers.

Roles & Responsibilities

Job Description

• Carry out Civil and Structural related detailed design, drawings, analysis and calculation required.
• Responsible for the structural analysis, design and authority submission to liaise with client or contractor.
• Provide technical support and monitoring the construction progress, discuss with immediate Supervisor and give out solution on site issues.
• Prepare calculation and drawings for temporary or permanent structures in obtaining approval from authority.
• Check and review all Civil and Structural related drawings and documentation received from Contractor or Client.
• Can do drafting as assigned by immediate supervisor, inspection and other work assigned from time to time.
• Has knowledge in any related authority submission of projects

Job Requirements

• Diploma/Degree holder with Structural related discipline
• Preferred graduate from local University or from overseas University with Excellent Academic results.
• Fresh graduate may apply
• Ability to work independently.
• Familiar with EuroCode Design
• Excellent in written and verbal communication
• Experienced and proficient in using AutoCad 2007 and Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Technical expertise and knowledge of concrete material & structure design
• A team player with the ability to multi-task, prioritize and organize tasks
• Possess a "can do" attitude

• Managing the planning and design stages of construction projects.

• Contributing technical expertise to project drawings and designs.

• Performing cost calculations and preparing financial projections.

• Preparing work schedules in collaboration with the project manager.

• Liaising between contractors, subcontractors, vendors, and suppliers.

• Overseeing construction engineering processes.

• Performing regular tests on materials and procedures to ensure compliance with industry regulations.

• Ensuring that the construction project is completed on time and within budget.

• Documenting processes and keeping detailed construction logs.

• Presenting construction project progress updates to clients and senior managers.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.