• Inspecting surfaces to be tiled
• Providing quotes and estimates
• Surface preparation work (e.g. removing old grout and cement and cleaning and levelling surfaces)
• Laying tiles in accordance with tiling plan, cutting tiles where necessary
• Grouting gaps between tiles
• Carrying out finishing work, where necessary
• Working out how many tiles and how much adhesive you’ll need for a particular area
• Cutting tiles to a certain size or shape with hand-cutters or bench-mounted tools
• Decorating and protecting floors and walls using all kinds of tiles (including ceramic, clay, slate, marble and glass)
• Laying intricate mosaic tiles

• To repair bins, fabricate bins, welding of the bins and support on all mechanical equipment, pumps, conveyors, gearbox and etc in plant as per schedule and upon breakdown
• To do in house welding, fabrication and plumbing works as per requirements by operation
• Attend any mechanical breakdown immediately and to run back the plant
• Installation, modification and fabrication of new equipment & machines in plant needed by operation
• To minimize equipment break down and down time, by doing proper and effective maintenance & repairs by problem identification & problem solving
• Other ad-hoc duties as assigned

• Responsible for automobile painting and support for mechanical work, such as installation, fabrication, and repairs.
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act
• Applies protective coats of paint, varnish, lacquer, and/or other related materials to interior and exterior surfaces of steel/metal structures.
• Washes, scrapes, sands, torches, and/or smoothes interior and exterior surfaces prior to painting, varnishing, lacquering or applying other related materials.
• Cleans equipment, paint mixing area, and work area.
• Operates sandblasters, spray equipment, other small power equipment and lifting equipment.
• Identification, safe handling, and appropriate disposal of paints, stains, preparatory and undercoating materials and other hazardous materials.
• mixes paints and other solutions and monitors drying to ensure desired results.
• Applies paints, stains, surface preparatory materials, and undercoating materials to a variety of surfaces, as appropriate, and according to Materials Safety Data Sheets ensuring compliance with hazardous materials guidelines.
• Follows all required safety procedures.

• Responsible for automobile painting and support for mechanical work, such as installation, fabrication, and repairs.
• Attend to ad hoc job at train and bus depots
• Responsible for personal and safety of others accordance to workplace and health safety act
• Applies protective coats of paint, varnish, lacquer, and/or other related materials to interior and exterior surfaces of steel/metal structures.
• Washes, scrapes, sands, torches, and/or smoothes interior and exterior surfaces prior to painting, varnishing, lacquering or applying other related materials.
• Cleans equipment, paint mixing area, and work area.
• Operates sandblasters, spray equipment, other small power equipment and lifting equipment.
• Identification, safe handling, and appropriate disposal of paints, stains, preparatory and undercoating materials and other hazardous materials.
• mixes paints and other solutions and monitors drying to ensure desired results.
• Applies paints, stains, surface preparatory materials, and undercoating materials to a variety of surfaces, as appropriate, and according to Materials Safety Data Sheets ensuring compliance with hazardous materials guidelines.
• Follows all required safety procedures.

• Read blueprints, drawings and sketches to fully grasp requirements
• · Take measurements and calculate the size and amount of material needed
• · Cut, shape and smooth lumber and other material (e.g. fiberglass) according to measurements
• · Build window frames, doors, staircases and frame buildings by using raw materials or pre-constructed items
• · Lay out floorings, roofings or drywalls ensuring they are leveled and compatible
• · Carve and assemble furniture, cabinets, shelves and other items and install them where designated
• · Inspect places and conduct repairs or maintenance
• · ·Build scaffolding and other construction structures

• Manage and oversee the administrative staff, including recruitment, training, and performance management.
• Manage budgets for the administrative functions of the company, including office supplies and equipment.
• Ensure that all administrative tasks, such as data entry, filing, and correspondence, are completed accurately and efficiently.
• Coordinate and manage office events and meetings.
• Maintain and update company databases and records.
• Implement and maintain health and safety procedures in the office.

Cost Control Accountant job involve analyzing and calculating costs and expenses to provide accurate financial information to management. They play a critical role in cost analysis, budgeting, and variance reporting, helping organizations optimize operational efficiency and profitability.

Should be able to provide consultation to clients in maintaining and following regulated accounts procedures.

Benefits:

• Basic Salary up to $7,500 with yearly increment based on performance.
• 5 days work week, Monday to Friday 9am to 6pm
• Up to 16 days of Annual leave
• $50 cap per visit for GP panel doctor
• $250 cap per year for dental
• $300 cap per year for specialist
• Our company emphasises on good career progression and providing our employees attractive remuneration with generous bonuses.

Job Description

This is a full time role for a Motion Control Engineer located in North Bridge Road.Our client is the global manufacturer & leading supplier and your responsibilities involve developing and designing automation solutions using PLC, robot, and motion technologies. You create purchase lists for electrical devices needed in automation control systems. You also work on projects aimed at reducing cycle time and enhancing product quantity. Monitoring and improving PLC programs to ensure smooth operations with minimal errors is a key part of your job. Additionally, you program PLCs to control vision systems, robots, AGVs, and servo systems. Collecting execution timing data, building timing charts, and analyzing cycle time are also part of your responsibilities. You coordinate internally with various departments and HQ/subsidiaries to resolve technical issues and provide solutions to customers. Moreover, you liaise with suppliers and customers from China.

Qualifications:

• Bachelor's degree in Motion Control, Control Engineering, or a related field.
• Minimum 5 years of experience in motion control (actuators, robots, linear motors).
• Candidates with experience in projects related to Semiconductors, Displays, and Secondary batteries are preferred

Description:

• Ensure that only authorised staff displaying valid SP Group (“SP”) security passes are permitted to enter the Company’s installation
• Ensure that all items / materials taken out of the TCC are accounted and recorded
• Ensure that the company’s facilities, main and pedestrian gates are closed and locked whenever they are left unattended
• Ensure that photo taking and video filming are not permitted in the premises unless with the approval of at least the relevant Head of Section
• Record all incidents in the Occurrence Book and immediately report all incidents/fire alarms/malfunctioning of CCTV, Fence Intrusion Detection System and Vehicle Crash Barrier System to the company and the Security Command Centre (“SCC”)
• Attend to any incidents/matters/activation of fire alarms with Comms set and execute company’s Standard of Procedure
• Contact the relevant Contact Person/s during an emergency
• To enforce any instructions/directives in connection with CRISIS management such as Severe Acute Respiratory Syndrome, Flu Pandemic or any other matter health related incident as required by the relevant authorities
• Ensure all equipment and keys are accounted for when changing shift
• Comply with all Standard Operation Procedures (SOP) issued by the Company
• Support any other duties as assigned includes tunnel exercise with external parties such as SCDF, EMA, etc
• Check that the entries made by contractors/visitors in the visitor’s logbooks are correct and complete Not allow any unauthorized person, including the Company staff to enter the control room unless approved by the Company
• Operate and monitor RFID system to track all personnel enter/exit tunnels
• Monitor Tunnel SCADA system (similar to Building Monitoring System)
• Perform emergency SOP to guide staff/workers to evacuation out of tunnels
• Monitor and trending data of M&E systems
• Ensure an emergency call-out service is available at all times
• Any other systems and components, which are to monitor but not specifically mentioned in the abovementioned sub-clauses but are within the Contract Area, shall be included in this Contrac

Requirement:

• Singapore Citizens / Permanent Resident only
• Certified to be medically fit.
• Personnel must have Mechanical and Electrical (M&E) engineering experience with some background knowledge of security management.
• Experience in working in commercial control room to monitor M&E and fire system.
• Minimum three (03) years of relevant experiences similar in nature to Tunnel Control Centre will be advantage.
• Able to speak and write in English and familiar with Microsoft Office software.

Our client is in construction industry (Grade A1 Contractor/ Class 1 General Builder) and they provide full suite of integrated construction services and solutions in both the public and private sectors.

JOB DIMENSION (SCOPE)

• Liaise closely with Senior Manager, EHS (Environment Health Safety) and Head of Project to develop, implement, maintain, and improve EHS Management Systems and safety culture at project level.
• Lead daily toolbox meeting, safety meetings, safety inspections, safety training and all other EHS initiatives or activities to maintain a high level of safety at work site.
• Monitor and take disciplinary actions against unsafe acts/conditions on project site to comply with the Company Safety Management System and the WSHA and its subsidiary legislation.
• Responsible for accident reporting and investigations including near misses and any industrial disease cases at work site.
• Identify environmental issues and recommend measures to rectify the irregularities.

REQUIREMENT

• Must be a registered WSHO with the relevant authorities with at least 3 years’ of relevant working experience in a construction firm
• Other pre-requisites are excellent team spirit, good interpersonal skills and a “can-do” attitude
• Willing to work night shift on rotation basis will be added advantage

Position Title: Head of Construction

Location: Singapore

Your role

The incumbent will be responsible to lead and manage a team of construction project manager professionals across APAC. The role will ensure consistent, predictable and scalable solutions to world class safety, schedule, quality and commercial project delivery outcomes. They will adopt a partnership-based approach with both internal and external stakeholders to execute the delivery of design and construction projects.

What you’ll do

• Reporting to the APAC VP of Design Engineering and Construction, the candidate will be based in Singapore and will lead a team of construction project delivery managers across APAC.
• Partner with the APAC Head of Design to deliver data centre capacity aligned with business unit strategic direction.
• Lead the overall management of site delivery teams and monitor against agreed outcomes and activities.
• Implement off site fabrication and manufacturing solutions to the design and delivery phase of capacity delivery where appropriate
• Implement and scale repeatable and predictable processes to ensure accurate project tracking, reporting and risk management mechanisms
• Lead the direction and monitor the performance of GC’s, OEM’s and external consultants that are engaged across the region.
• Act as the focal point of management for regional safety, schedule and cost performance during the delivery phase.
• Procure and execute delivery strategies that are consistent with company practices, ensuring suitability for local country implementation
• Implement and lead a world class safety culture with internal stakeholders, general contractors, equipment vendors and the wider supply chain
• Excellent project management skills, the ability to manage multiple projects, project manage team members and vendors seamlessly.
• Ability to work with many groups and disciplines within the organization including executive management, operations, sales and finance.
• Program/Project Management of design and construction vendors from initiation to closeout for new facility construction, upgrades of existing facilities, and other related construction work.
• Prepare budgets and forecasts related to anticipated design and construction expenditures.
• Development of project program and scope documents that are aligned with business objectives and value-engineering philosophies
• Work with Sales for customer enquiries and site visits for sales opportunities.
• Be a cross functional partner with internal teams to enable seamless end to end delivery
• Preparation of requests for proposals.
• Evaluation of proposals and recommendations to management regarding vendor selection.
• Expected to closely track progress (scope, budget & schedule) of all design and construction-related projects from inception to completion. Ability to communicate progress to both internal and external stakeholders.
• Monthly progress reporting.
• Initiating and maintaining design & construction standards that provide for cost effective facilities.
• Initiating and maintaining a historical construction cost database that captures the scope, schedule and cost of all completed projects.
• A good understanding of advanced electrical, mechanical, security / monitoring, and fire detection/suppression systems.
• An understanding of standard practices in the design and construction industry.
• A good familiarity with basic building code requirements.

What you’ll need

• Bachelor's degree (BA/BS) from a four-year college or university and a minimum of six years of related project management experience of technically complex projects required.
• Min 15 years construction delivery experience – either trade, general contractor, consultant, design engineer etc.
• Be a construction industry safety thought leader
• Professional License (Architect or Engineer) desired.
• Ability to comprehend, analyse, and interpret complex business documents, design drawings, construction drawings, construction specifications, design and construction contracts, project schedules and detailed budgets / estimate summaries.
• Ability to project manage effectively.
• Ability to make effective presentations and respond to questions from groups of managers, clients, customers and the public.
• Requires a high level of commitment to customer service, whether co-workers or clients.
• Ability to analyse and solve problems involving several options with limited information. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form and to work independently. Requires advanced analytical and quantitative skills.
• Demonstrate ability to work well under pressure with a proactive approach to unusual occurrences.
• Requires good organizational skills, attention to detail and an openness to new ideas and procedures.
• Experienced in the use of MS Office software and AutoCAD.
• Decisions made with understanding of procedures, company policies and business practices to achieve general results. Responsible for setting and meeting work unit and/or project deadlines.
• Requires general knowledge of design and construction terms and principles and contracts.
• Requires the ability to review and analyse budgets and estimates.

Our client is in construction industry (Grade A1 Contractor/ Class 1 General Builder) and they provide full suite of integrated construction services and solutions in both the public and private sectors.

JOB DIMENSION (SCOPE)

• Manage all aspects of the construction execution; from site preparations to build-out, are carried out in accordance with the project timelines and specs.
• Ensure that the construction, installation and assembly of components, equipment and systems of the construction is aligned with the construction plans and drawing designs.
• Prepare construction progress reports based on contractual terms on time, cost and quality.
• Document action items and follow-ups from project meetings
• Liaise with clients for site inspections, submission of necessary technical reports, and maintain all required records at the sites.
• Drive safety and sustainability.

REQUIREMENT

• Possess a Degree in Civil Engineering/Structural Engineering, or equivalent
• Experience in building (hotel/ commercial) project is preferred
• Must be technically inclined and possesses excellent problem-solving.
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams.
• Candidate can start work in short notice is preferred.

Job Description:

1. Site Safety and Compliance: Supervise safe execution and maintain site safety records. Ensure works comply with safety regulations and review risk assessments. Represent CAG in safety and housekeeping matters. Conduct investigations and prepare safety reports.
2. Permit and Supervision: Oversee site excavation and hot works with approved permits. Ensure contractor compliance with safety requirements, including cleanliness and tidiness.
3. Safety Inspections and Meetings: Inspect worksite for safety compliance and attend safety meetings. Ensure worksite boundaries are maintained and unauthorized access is prevented.
4. Airside Specific Duties: Ensure compliance with Airside Works Procedures and AOS Requirements. Conduct safety inspections, including checking for Foreign Object Debris (FOD) and wildlife attraction.

Requirements:

· Minimum 5 years of relevant WSHC experience, including 3 years in major construction supervision.

· Must hold relevant certifications WSQ Advanced Certificate in WSH Level B, BCSSC, and Occupational First Aid.

· Preferably have airside experience and a valid Singapore driving license.

Working Hours:

• Monday to Friday - 8.30am to 6.00pm
• Saturday - 8.30am to 1.00pm
• Sundays and Public Holidays – Off
  OR
• Night Working Hours - 12.00am to 7.00am

Roles & Responsibilities

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents and site instructions.
• To check mock-ups done on site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.
• To prepare defect lists, monitor progress of rectification works and ensure all defects are satisfactorily rectified.
• Write daily reports of works done by contractor and record daily manpower status on site.
• Inspect and maintain records of equipment/machinery/licensed machinery operator/permits (both statutory and aviation requirements).
• To ensure that the structural elements or critical works of the construction works are being carried out in accordance with the approved plans and with any terms and conditions imposed by the Commissioner of Building Control where necessary.

Requirement:

• Diploma in Mechanical or Electrical Engineering from a recognized tertiary institution or relevant qualifications.
• Minimum two (2) years of relevant experience as a RTO, of which at least three (3) years shall be in supervision of works similar in nature to major construction works in buildings, services laying and lighting & control systems.
• Accreditation with the Joint Accreditation Committee of the Institution of Engineers Singapore and the Association of Consulting Engineers Singapore are preferred.
• Certificate in Building Construction Supervisors Safety (BCSS) Course.

Description:

• To ensure that the building and its related works are constructed in accordance with Drawings and Specifications and the Building Control Act and Regulations;
• To monitor and report on the progress of works;
• To carry out inspection of civil and structural engineering works prior to concreting;
• To supervise concreting work;
• To carry out checks on compaction and curing of concrete;
• To carry out checks on striking of formwork, re-props and removal of props;
• To carry out checks on quality & erection of precast components;
• To check on structural steel works;
• To carry out inspection on structural defects rectification works;
• To carry out supervision and inspection of the works as directed by the Supervision QP;
• To manage and supervise the Resident Technical Officer under his charge;
• To ensure that records of all civil and structural engineering works, including records of tests, defect rectification, inspections, work progress, material and equipment on site, safety, etc, are timely updated and properly kept;
• To attend site, progress, variation and coordination meetings;
• To verify all reports and claims relating to structural works submitted by the contractors;
• To resolve contractor's queries and coordinate the works of the main contractor
• and other contractors on site;
• To liaise with all relevant authorities;
• To check all drawings and specifications for discrepancies and to report to the Supervision QP, Consultant or S.O. and bring to the attention of the Quantity Surveyor;
• To ensure that works are carried out in a safe and proper manner;
• To feedback site problems, discrepancy and irregularities to Supervision QP Consultants or S.O.;

Requirement:

• Minimum five (5) years of relevant experience as a Resident Engineer of which at least three (3) years shall be in supervision of works similar in nature to major construction works listed in the Project Brief such as in buildings, civil pavement works like rigid pavement and taxiway/runway pavement works, etc.
• Civil and structural works in Airport, transportation terminals, commercial complexes or hospitals, etc.
• Must be accredited as a Resident Engineer with Building Control Authority (BCA)/ Joint Accreditation Committee of the Institution of Engineers Singapore (lES) and the Association of Consulting Engineers Singapore(ACES);
• Working experience of bored pile construction, basement construction, experience with large span steel structural construction would be preferable;
• Strong knowledge of C&S details, working drawings, shop drawings and C&S construction method;
• Strong knowledge of LTA and BCA requirements and regulation for foundation and building structure construction;
• Basic knowledge of architectural and M&E shop drawings and construction works on site;
• Conversant with local building codes and regulations;
• Good supervisor and leadership skills;

• Liase with clients to understand their needs
• Prepare for project tender according to client's needs
• Checking of drawing to be submited for projects
• Inspects and evaluates new suppliers’ materials
• Estimate and control cost for each and individual projects
• Ensure cost effectiveness of each projects
• Working on site and making sure that all safety and quality standards are met
• Liase with suppliers and sub-contractors and assigning of duties to subordinates
• Other duties assigned by company

Job Description & Requirements:

• Work closely with the project team on environmental issues such as noise monitoring, pollution, vector control, air pollution, water pollution and drainage, prevention & control of infectious diseases, food hygiene, solid waste management, chemical storage & disposal, and haze response procedure. Ensure compliance with the latest environmental regulations.
• Implement and monitor environmental control programs on site.
• Prepare, submit statutory reports, and maintain documentation for environmental public health requirements on environmental issues.
• Conduct regular inspections and actively be involved in environmental matters on site.
• Enforces all environmental requirements and in-house rules and regulations
• Attend site meetings/ client meetings and prepare weekly reports.
• Liaise with government authorities in relation to safety and environment compliance matters.

Requirement:

• Must be registered ECO with NEA.
• Minimum 2years experience or relavent feild.
• Excellent communication and interpersonal skills.
• Proficient in MS Word and Excel, and MS Outlook.
• independently Environmental control officer

Job Description

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• To report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timelycompletion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must havethe strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurancesystem.
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• To manage the site supervisors with respect to C&S engineering works, architectural and MandE engineering works.
• To attend site, progress, variation and coordination meetings Interpret drawings and contract documents on works to be carried

Requirement :

• The RE shall be an engineer in the civil/structural discipline with qualification accredited by the Commissioner of Building Control and accepted by Institute of Engineer Singapore (IES) / Association of Consulting Engineers Singapore (ACES)

COMPANY DESCRIPTION

Founded in 1970, Mediterranean Shipping Company (MSC), S.A of Geneva, Switzerland, is one of the world's leading container shipping lines. We are a privately-owned global organization operating a network of over 675 offices in 155 countries, employing a team of over 200,000 dedicated individuals. We have an established fleet of 850 container vessels with an intake capacity of circa 24.5 million TEU carried annually. Our global sailing schedules cover 300 routes, calling at 520 ports, allowing us to deliver our clients' cargo almost anywhere in the world.

Operating as independent national carriers, with sea freight offering complemented by our integrated warehousing and haulage services, we offer customers a true door-to-door and global service with unrivalled local knowledge. Trained and experienced experts for our full range of services, including reefer, out-of-gauge, breakbulk and each of our trade services, gives us the ability to uphold the personal service we're globally recognized for, offering customers peace-of-mind that we will be on-hand to help whenever we are needed.

An opportunity is now available for a career-minded individual to join us in MSC South East Asia (Singapore) Pte Ltd, as Cost Control Analyst.

RESPONSIBILITIES

We Offer

You will embark on a great journey with excellent career development opportunities in a global organization. As Cost Control Analyst, you will be responsible for the financial reports and management reporting for Singapore, as well as maintaining and executing financial controls in compliance with Company policies, Singapore Financial Reporting Standards (SFRS) and International Financial Reporting Standards (IFRS).

Key Responsibilities

Reporting to the Cost Control Manager, in this position, you will have opportunities to acquire skills and knowledge in the following areas:

Cost Control

• Monitor, evaluate and analyse all Principal expenses with the aim of reducing costs and achieve savings;
• Standardization and consistency of cost reporting;
• Ensure timely approval of operational vendor expenses;
• Verify principal costs debited against the provisional expenses reported and justify the variances;
• Address queries from Principal timely;
• Ensure various monthly suspense accounts are reconciled following the timelines given by the Principal;
• Study related Principal incomes (land and logistics) and ensure maximization in terms of billings, collections and margins;
• Ensure that waivers of principal incomes (land and logistics) are properly approved and reduced where possible;
• Collaborate across functions and departments for compliant internal controls and effective costs and risks mitigation;
• Related tasks as assigned;
• Involve in vendor selection/evaluation process for Principal expenses.

Reporting and Deliverables to Management

• Prepare and/or compile various monthly suspense accounts reconciliation Report, including Electronic Cost Reporting ("ECR") correctly and in a timely manner;
• Prepare monthly Agency KPI data as assigned;
• Prepare Principal cost analysis and monthly analysis report to management and Regional Office;
• Proactively identify potential risks and mitigate risks with the relevant Head of Departments (HODs) and / or process owners;
• Work closely with internal / external auditors, tax agent and local authorities to resolve any local issues raised;
• Ensure proper audit trails for records according to statutory requirements.

Systems and Process Improvement

• Collaborate with relevant stakeholders to drive improvements and resolutions in end-to-end Cost Control processes;
• Identify system / process misalignments to drive standardization and improvement, raise request and follow-through to closure with System support;

Performance Management and Individual Development

• Develop performance measurements to drive individual and team performance;
• Serve as a coach/ mentor and provide technical financial advice and knowledge to the Cost Control team;
• Demonstrate commitment to professional self-development to employees in the Cost Control team;
• Identify and initiate improvement areas and develop good accounting control procedures and best practices to enhance overall cost control operations, work quality and efficiency;
• Support Cost Controller/ Cost Control Manager, Senior FM and Chief Financial Officer in new initiatives or projects as and when required.

Who We Are Looking For

• Min Degree in Accountancy / Finance, ACCA or Professional Accounting qualification equivalent;
• Minimum 6 to 8 years of relevant work experience in maintaining and executing accounting controls and reporting;
• Minimum 3 to 5 years from shipping industry / Liner or Agency shipping experience, managing related cost control and reporting an added advantage;
• Experienced in managing changes and thrive in dealing with challenging business environment;
• Good knowledge of IFRS and SFRS accounting standards;
• Proficient in MS Word, Excel, Powerpoint;
• Experienced in using SAP financial system and related data flow;
• High level of Integrity and Ethics;
• Team player;
• Organised and meticulous with an eye for details;
• Problem Solving / Analytical skills;
• Ability to manage time well to meet tight deadlines and multi-task;
• Able to work under stress and adaptable to changes;
• Strong Communication & Presentation skills, both written & verbal.

If you are up for the challenge, you could be our new colleague!

Please send updated CV by clicking on the Apply Now button.

Kindly indicate your current availability period, current salary & expected salary when you submit your application.

Report to Senior Construction Manager & Project Director.

Overall in-charge of construction of road tunnel, escape staircases, utilities & road diversions etc.,

Seek advice and resolve site engineering problems and with Construction Station Manager.

Check site installation of temporary works / falsework.

Maintain and keep inspection records, daily site reports, survey, setting out records etc.

Attend progress meetings with Construction Station Manager to discuss progress, technical, quality and construction issues as and when necessary.

Assist Construction Manager in preparing materials/manpower/equipment/sub-con/supplier requirements for station works based on the baseline programme.

Liaise with Design Manager/Design Engineer/Others for submission of required materials / Method Statements

Plan and prepare method statements and submit to Construction Manager for review.

Implement project method statements and inspection and test plans.

Receive drawings and study construction details and check for discrepancies and rebar schedules.

Ensure to update construction drawings as per the latest revision and incorporate part plans and highlight changes if any to the construction drawing.

Report / record events and instructions.

Check quality and quantity of subcontract work done.

Plan material lay down storage areas and informs Site Checker.

Able to work on night shift.

Key Purpose of the Job:

Enable Product Supply (focusing on Global Quality Platform) and support Sr. Manager of Quality Enablement by driving process improvement and harmonization, system transformation, SOP documentation, change management, identifying value generating initiatives and executing projects through diligent project management. Required to proactively foster relationships with Regional Product Supply Quality teams, Brand Quality teams, Digital & Technology teams and other Product Supply x-functional teams (i.e sourcing, S&R, finance).

Should be passionate about exploring new ways of working, process mapping, SOP documentation, analyzing data, driving change management, and learning / implementing new systems and technologies.

Key Area of Responsibility:

· Act as a Subject matter expert in the Quality Management and Assurance domain and be part of a larger team responsible to incubate ideas to improve VF’s operational effectiveness.

· Drive harmonization, simplification and identify process improvement opportunities across the Global Quality Platform.

· Support execution of Quality strategic initiatives, including digital roadmap, system implementation and transformation.

· Derive business insights from analysis of quality performance data.

· Proactively foster internal and external relationships (i.e factories, software providers) to execute projects and drive system and process improvements.

· Lead x-functional global projects through effective project management.

· Prepare presentation documents, lead training, and assist in presenting findings to all levels of management.

· Map and document Global Quality Processes and KPIs.

Strategic Role Relationship Building

· Proactive in nurturing cross-functional relationships to identify and execute process improvement.

· Strong and trusted relationship building with Brand QA Teams, Operational QA Teams and QA Technical teams.

· Debates and provides authentic dialogue with stakeholders to generate idea pipeline and execute projects.

· Proven ability to influence and make decisions cross-functionally in a matrix environment where speed and cultural sensitivity is crucial.

· Strong partnership with DT to drive system design improvements, system implementation, automation, and perform necessary testing.

Leadership and Team Player qualities:

· Actively listens to others, exchanges ideas, curious / inquisitive / continued improvement mindset, self-starter.

· Adapts communication style to audiences across various levels and functions.

· Perseveres through adversity and influences stakeholders.

Minimum Relevant Experience:

2- 4 years

Minimum Academic Requirement:

Bachelor’s degree Preferred

Major Subjects:

Quality Management / Business Management / Supply Chain, / Data Science / Engineering / Mathematics / Finance or related analytic field

Required Professional Qualification:

· Operations and project management experience – Prior experience (2-4 years) in strategy, management consulting, finance, operations, retail/consumer products, project management, system transformation or similar supply chain role. BA/BS required.

· Computer Skills – Proficient with Microsoft Office Suite, Tableau / Power BI / Quality System Modules preferred.

· Problem Solver & Drive results - Can proactively identify opportunities, solve problems, manage multiple priorities, influence stakeholders, and drive results through effective and autonomous project management.

Other Requirements:

- Proficient in English (Written and Oral)

- Experience leading regional or global projects

- Strong analytical and problem-solving skills

- Familiar with 5S / ISO 9001 / 8D problem solving

- Knowledge of SPC, CPK and Six Sigma disciplines, FMEA / PMP would be advantageous

- Manufacturing Quality Operations knowledge preferred

- Technical documents writing experience

- Proficient in MS Office applications: Microsoft Excel, PowerPoint

- Proficient in use of common applications: Smartsheet, Tableau, PowerBI is a bonus

• Review and interpret project plans, drawings, and specifications.
• Coordinate with project managers, engineers, and contractors to address and resolve technical issues.
• Conduct site inspections and prepare detailed reports on work progress, compliance, and any deviations from the plans.
• Ensure all construction activities comply with relevant environmental and safety regulations.
• Liaise with local authorities and stakeholders to obtain necessary permits and approvals.
• Maintain accurate and comprehensive records of all site activities, inspections, and incidents.

Requirements:

• Diploma/Degree in Civil Engineering or related field.
• Minimum of 3 years of experience in relevant field.
• Certified Resident Technical Officer (RTO) with accreditation from the Singapore Institute of Engineers (IES) or other relevant bodies.

Key Responsibilities:

• Supervise and inspect all marine and coastal construction activities on-site to ensure adherence to project specifications, quality standards, and safety regulations.
• Review and interpret project plans, drawings, and specifications.
• Coordinate with project managers, engineers, and contractors to address and resolve technical issues.
• Conduct site inspections and prepare detailed reports on work progress, compliance, and any deviations from the plans.
• Ensure all construction activities comply with relevant environmental and safety regulations.
• Liaise with local authorities and stakeholders to obtain necessary permits and approvals.
• Maintain accurate and comprehensive records of all site activities, inspections, and incidents.

Requirements:

• Diploma/Degree in Civil Engineering or related field.
• Minimum of 3 years of experience in coastal and marine construction projects.
• Certified Resident Technical Officer (RTO) with accreditation from the Singapore Institute of Engineers (IES) or other relevant bodies.
• Strong knowledge of Singapore’s building codes, regulations, and safety standards related to coastal and marine works.
• Strong communication and interpersonal skills to effectively collaborate with a diverse team.
• Ability to work independently and as part of a team in a fast-paced environment.

Job Description

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• To report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timelycompletion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must havethe strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurancesystem.
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• To manage the site supervisors with respect to C&S engineering works, architectural and MandE engineering works.
• To attend site, progress, variation and coordination meetings Interpret drawings and contract documents on works to be carried

Requirement :

• Atleast four (4) years of relevant experience as a civil engineer, of which at least two (2) years shall be in supervision of works similar in nature to works in this Contract.
• The RE shall be an engineer in the civil/structural discipline with qualification accredited by the Commissioner of Building Control and accepted by Institute of Engineer Singapore (IES) / Association of Consulting Engineers Singapore (ACES)

Job Description

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• To report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timelycompletion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must havethe strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurancesystem.
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• To manage the site supervisors with respect to C&S engineering works, architectural and MandE engineering works.
• To attend site, progress, variation and coordination meetings Interpret drawings and contract documents on works to be carried.

Job Requirement

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore.
• Accredited with IES/ACES with a valid Resident Engineer Practicing.