Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Job Description:

• Infrastructure works like roads, drains, sewer works and ancillary works;

• Rectification of infrastructure works such as roads, drains, sewers and ancillary works for handing over to authorities;

• Provision of amenities such as footpaths/pavements, Personal Mobility Device (PMD) tracks, cycling paths, sheltered linkways, decking, etc;

• Construction of surface parking for cars, buses, heavy vehicles;

• Road traffic and junction improvements such as installation of road signage, lane markings;

• Construction of bus stops, bus bays, pedestrian overhead bridges and associated works;

• Earthworks and disposal of debris, removal of stockpiles and other unusable material;

• Slope protection and rectification, Trial trench works;

• Minor land clearances and clearing of overgrown vegetation;

• Instrumentation & Monitoring

Job Requirements:

• Degree in Civil & Structural Engineering from a University recognized by the Professional Engineers Board (PEB) and/or accreditation recognized by the Professional Engineers Board.

• At least 5 years of practical experience in the management of building (e.g. new building, R&R and A&A projects) or infrastructure (e.g. road, drain, sewers, services diversion) projects with contract value of $5 million and above.

• The PM must be familiar with PSSCOC.

• At least 2 years of relevant working experience or involvement in Integrated Digital Delivery (IDD) for project delivery and built environment industry.

• Strong, mature and proven ability to organize, manage and motivate a project team.

Duties and Responsibilities

• Serve as a technical expert for one or more high power and high voltage converter topologies and control subsystems or features, capable of independent decision making for critical technical issues
• Applies broad knowledge in sensors, power electronics control algorithms, electrical hardware design, software, signal processing, and data analysis methods and tools to drive power converter hardware design, control system and product development to improve product efficiency, minimize losses and increase power density of converter systems
• Leads the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Leads the design and building of tools that allow debugging, analysis, and evaluation of control system performance. Leads the root cause analysis for control system failures in products for integration and fielded units during escalations
• Leads the electrical converter design and topology selection for improved product features to increase product market penetration and differentiation
• Provide guidance on PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems
• Lead and perform integration activities with mechanical and firmware team to troubleshoot the control system, design and execute test plans and test automation, and to develop and test the power converters
• Lead in the design failure mode and effects analysis (DFMEA), design for manufacturing, and design for cost reduction efforts
• Support on product certifications and compliance
• Documents work results with requirements, design specifications, procedures, and training materials
• Mentors junior engineers

Knowledge, Skills and Abilities

• Advance power electronics design: In depth knowledge on designing different converter topologies used on advance power electronics systems for the high voltage and high power applications
• Control System Design: Lead the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration
• Algorithm Development: Develop control algorithms and strategies for power converters to improve dynamic response, fault tolerance, and performance
• Modeling and Simulation: Create mathematical models and perform simulations to validate control system designs and optimize performance
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware
• Testing and Validation: Design and execute test plans to validate control system performance and robustness
• Hardware Integration: lead and coordinate the integration of control electronics with power converter hardware
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases
• Compliance: Ensure that control systems meet industry standards and regulatory requirements
• Mentorship: Provide guidance and mentorship to junior controls engineers

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field
• Minimum of 25 years of experience in electrical hardware design and controls engineering, with a focus on advance power converter systems
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink)
• Strong programming skills in languages such as C/C++ for embedded systems
• Experience with hardware-in-the-loop (HIL) testing and control system validation
• Knowledge of grid integration, grid codes, and power quality standards is a plus
• Excellent problem-solving skills and attention to detail
• Effective communication and teamwork abilities
• Ability to work in a dynamic and collaborative environment

• Preparing surfaces: Cleaning, leveling, and smoothing surfaces before installing tile
• Measuring and marking: Measuring and marking the surface to be tiled
• Applying adhesive: Mixing, applying, and spreading mortar, cement, mastic, glue, or other adhesives
• Setting tiles: Setting tiles in position and applying pressure to affix them to the base
• Aligning tiles: Using levels, squares, and straightedges to align and straighten tiles
• Cutting and fitting tiles: Using hand and power cutting tools to cut and fit tiles around obstacles and openings
• Grouting: Packing grout into joints between tiles and removing excess grout
• Installing tile strips: Installing tile strips
• Laying mosaic tiles: Laying and setting mosaic tiles to create decorative wall, mural, and floor designs
• Removing and replacing tiles: Removing and replacing cracked or damaged tiles

Responsibilities

• Preparation of comprehensive tender documents, detailed bill of quantities, and the development of the project's overall budget.
• Assessment and compilation of monthly progress claims.
• Conducting cost analysis and cost control throughout the project.
• Evaluating and negotiating contracts with vendors and subcontractors.
• Collaborating with project teams to ensure adherence to budget constraints.

Requirements

• Min Diploma in Building / Construction or Quantity Surveying
• Able to use AutoCAD, Microsoft Excel, Microsoft Word
• Good communication skills
• Independent & responsible for the construction project assigned
• Resourceful & maintain good relationship with sub-contractors

Other:

• Working Day: 5.5 days per week (Alternate Saturday)
• Working Hour: 8.00am to 5.30pm (Mon to Thur) 8.00am to 5.00pm (Fri) 8.00am to 12.00pm (Sat)
• Work Location: 24/26 Tuas Avenue 2
• Transport Provided near Choa Chu Kang MRT & Boon Lay MRT

We are the concentrate team in PepsiCo working across the Beverage, Nutrition and Snacks categories to deliver concentrate for many of PepsiCo’s mega brands including Gatorade, 7Up and Pepsi. We are at the heart of PepsiCo products, sourcing ingredients to manufacture more than 1,200 recipes for our brands. We are a global organisation, situated in 17 locations across 11 countries offering careers in various functions from Manufacturing, Supply Chain, Procurement, Quality, Finance, R&D, HR and IT. We want team members who can collaborate in our fast paced global organisation and are passionate about creating and delivering much-loved household brands to markets across the world.

The Technical Function is our team of enabling experts offering knowledge and partnership to functions on specialist subjects including engineering, quality and productivity. They ensure operations and food safety excellence for our team. Could you bring a new dimension to our technical expertise? If so we could take your talents to a whole new level.

This role requires supporting Quality Control requirements for finished goods as part of the QC team. Specific responsibilities can be expected to rotate between the finished goods and raw materials laboratories.

Kindly note that this role will require AM & PM shift work. AM shift timing is 7.30am to 4pm & PM shift timing is 3.30pm to 12 midnight. Transport will be provided.

Responsibilities:

• Responsible for the daily laboratory planning, prioritization and analysis of in-process and / or finished product samples in accordance to documented testing methodology.
• Provide accurate and timely disposition of Flavour Raw Materials and Finished Concentrates in accordance with the Company's accept/reject criteria.
• Ensure all instrumentation used in the testing of products are validated and calibrated to standard.
• Ensure all laboratory records are kept in accordance with the Company's protocol.
• Compile and report relevant KPI's monthly to Lab supervisor. Implement quality initiatives and quality strategic initiatives appropriate to level.
• Responsible for blocking and communicating any batches rejected or placed on-hold to operations and raise relevant Trackwise record for follow-up.
• Complete quality activities in the introduction of new product. Trouble shoot issues and carry out bench scale investigations where required.
• Analyse the data/trend and challenge non-value-added activities to streamline the Lab operations.
• Adhere to PepsiCo Health and Safety requirements.
• Ad hoc duties or projects as assigned by Lab supervisor.

Qualifications:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree in Food Science, Microbiology or Equivalent.
• Computer literate
• At least 3 years work experience in a relevant field.
• System and operational knowledge - SAP, LIMS systems and Gas Chromatography, HPLC operational and troubleshooting experience is an added advantage.
• An understanding of GMP/GLP and other key manufacturing processes
• Ability to planning, manage priorities and deliver results to meet internal customer requirements.
• Experience in building excellent working relationships with operations team members
• Good Communication Skills across all levels in an organization.
• Good Attention to detail
• Self-starter, proactive in delivering results and a good organizer
• Strong Team Player

Job Scope

• Manage project through designated project management software
• Communicate with key stakeholders to determine project requirements and objectives
• Confer with project personnel to identify and resolve problems
• Source and request for quotations from suppliers to ensure price competitiveness
• Submission of weekly and monthly reports
• Manage customer's expectations on the projects
• Manage the delivery of the project accordingly
• Assign duties or responsibilities to project personnel
• Monitor the performance of project team members to provide performance feedback
• Utilize industry best practice, techniques, and standards throughout the project execution
• Submit project deliverables to clients, ensuring adherence to quality standards
• Any other ad hoc duties as assigned

Requirements

• Possess at least a diploma or equivalent
• Possess a Class 3 Driver's License
• Able to commit to a 5.5-day work week
• Proficient in both English; in both written and spoken forms
• Technical knowledge in the telecommunication industry is an added advantage

We value all applicants and thank you for your interest. However, please be advised that only shortlisted candidates will be contacted.

RESPONSIBILITIES

• Be part of the site team to perform engineering design, project management and oversee drawing management, and control of technical documentation;
• Good knowledge of Singapore Building Regulations and codes, design development & detailing;
• To assist Project Manager for site planning, coordination, supervision, monitoring and inspections
• To ensure site activities are executed in full compliance with technical specification and approved drawings within project budget and schedule;
• To liaise with authorities, consultants and subcontractors for technical submittal and approval;
• To adhere to construction procedures and safe work practices;
• To ensure efficient control and use of manpower, equipment and materials onsite without wastage;
• Others ad-hoc related duties as assigned.

Requirements:

• Possess a Bachelor Degree in Civil Engineering duly recognised by Professional Engineer Board of Singapore and accepted universities within the BCA listing.
• At least 3 years in relevant working experience in local construction industry;
• Self-motivated, independent and good interpersonal & communication skills

Job Description & Requirements

RESPONSIBILITY

· Experience in pre & post contract administration

· Prepare tender cost submission / pricing / quantity take off / cost evaluation

· Obtaining quotations, liaising and negotiate with sub-contractors and suppliers

· Responsible for measuring quantities and taking off

· Prepare Variation Orders, claims and final accounts,

· Prepare sub contracts and sub-contractor payments

· All other QS related job

REQUIREMENTS:

· Degree / Diploma in Building or its equivalent

· Able to work independently

· At least 2 years of working experience with main contractor

· High level of integrity, responsibility, good team player and helpful

· 5.5 days work per week (alternate Saturday off)

Duties and Responsibilities:

• Handle public complaints and feedback related to project site.
• Prepare letters and notices to communicate with community and residents regarding development of project.
• Implement public relationship programme.
• Arrange and attend meetings on public relation matters with project team where necessary.
• Prepare a monthly report to update on the feedbacks and complaints.
• Maintain good relationship with clients and residents.
• Assist other general administrative support to the project teams.
• Perform other duties as assigned.

Job Specification:

• Diploma or Degree in any field.
• Minimum 3 years’ relevant experience working in a public-facing role.
• Willing to work at site office environment.
• Good communication skills.
• MRT working experience would be an added advantage.
• Independent, possess excellent interpersonal and communication skills and emotional maturity.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Description:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare tender and contract documents, including bills of quantities.
• Evaluate tenders from contractors and subcontractors and, where appropriate, negotiate with the contractors.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to client and subcontractors to facilitate the smooth workflow process.
• Communicate with the client, management, sub-contractors and keeps track of the progression of both main contract and sub-contract.
• Monitor and keep track of project progress and are responsible for the measurement and valuation of variations in the work during the contract, for agreement of interim payments and the final account.
• Perform all duties in accordance with CCCC policies, processes, systems and procedures.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• More than 4 years of working experience in the related field is required for this position.
• Acquired with both civils and architectural knowledges is preferable.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• 5.5days work week

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 3 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

Duties and Responsibilities:

• Handle public complaints and feedback related to project site.
• Prepare letters and notices to communicate with community and residents regarding development of project.
• Implement public relationship programme.
• Arrange and attend meetings on public relation matters with project team where necessary.
• Prepare a monthly report to update on the feedbacks and complaints.
• Maintain good relationship with clients and residents.
• Assist other general administrative support to the project teams.
• Perform other duties as assigned.

Job Specification:

• Diploma or Degree in any field.
• Minimum 3 years’ relevant experience working in a public-facing role.
• Willing to work at site office environment.
• Good communication skills.
• MRT working experience would be an added advantage.
• Independent, possess excellent interpersonal and communication skills and emotional maturity.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Job Descriptions:

• Manage and prepare the measurements and cost estimates for the construction projects from initial calculations to the final accounts.
• Prepare contract documents in accordance to the regulations.
• Prepare cost analysis and monitor project overruns to ensure the objectives of the project is achieved.
• Access payment and variation works to subcontractors to facilitate the smooth workflow process.
• Communicate with the management, sub-contractors and keeps track of the progression of the sub-contract.
• Any other adhoc tasks assigned by superior.

Job Requirements:

• Bachelor's Degree in Quantity Survey or equivalent.
• Entry level or with 1-2 year(s) of working experience in the related field is required for this position.
• Good communication and negotiation skills.
• Experience in LTA project, or similar scale, complexity and nature of work will be advantages.
• Have done Additions and Alteration projects will be advantages.
• Location: West.

Roles & Responsibilities:-

• Responsible to review T&C in all contracts and risk assessment and advise solutions accordingly.
• Resolve all contract issues and ensure all lega implications are reviewed and managed.
• Liaise with maincon on contractual matters including payment claims, change orders, variation orders, extension of time, etc.
• Lead and monitor the QS team for progress claims, variation works, bills of quantities and other tender requirements.
• Provide supervision to all contractual matter, tendering and procurement procedures (i.e. cost control, project budgeting, etc.)
• Work closely with the project team to ensure timely payments from maincon.
• Ensure timely finalization by maincon.

Requirements:-

• Degree or Diploma in Construction Management / ERSS / Quantity Surveying.
• Minimum 5-years of relevant working experience in contract administration, preferably have experience in SOP.
• Meticulous and systematic individual with positive working attitude.
• Possess good analytical skills and able to work in a dynamic & fast pace environment to meet critical deadline.
• Good oral and written communication skills.
• Multi-tasking and able to handle stress.
• 5 days week.
• Possess valid Class 3 driving license and own transport is preferred.

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

Key accountability (Main purpose of this job):

Reporting to the Senior Finance Manager, this role is responsible for supporting the Finance department in various functions including accounts receivable (managing credit risk and ensuring timely payment from our customer, cashiering and accounts payable.

Responsibilities (Key areas of Responsibilities):

Debt Collection

• Develop and implement effective debt collection measures
• Monitor customer payments and alert the Senior Finance Manager of delinquent accounts
• Liaise with company lawyer/debt collectors to minimize bad debts
• Send reminder letters / make collection calls for overdue accounts

Financial Assistance

• Administer financial assistance schemes through modified instalment plans/bursary
• Attend to extensions requests

Discrepancy Resolution

• Resolve discrepancies related to non-payment of invoices

Reporting and Reconciliation

• Prepare credit-related reports (e.g., weekly debtors aging reports to management during semester fees collection
• Provide weekly forecast collections for cash flow management
• Undertake account reconciliations as required

Others

• Maintain students' billing addresses in the accounting system
• Assist in audits when necessary
• Apply receipts in the accounting system
• Assist with cashiering duties
• Attends to incoming email requests on timely manner
• Issue invoices/credit notes

Requirements:

• Diploma in Accounting or equivalent
• 2 years of relevant working experience but fresh graduates who are highly motivated and autonomous are encouraged to apply
• Advanced proficiency in Google Workspace
• Accurate and meticulous with excellent attention to details
• A team player with good interpersonal and communication skills
• Ability to work independently and diligently
• Able to work effectively and efficiently under pressure and within timelines
• Strong problem solving and multitasking skills
• Ability to remain firm and maintain high ethical standards

Duties and Responsibilities

• Support the development and integration of innovative control system solutions to enable stable, efficient, and reliable production of grid tied power converters
• Support the design and building of tools that allow debugging, analysis, and evaluation of control system performance.
• Conduct root cause analysis for control system failures in products for integration and fielded units during escalations.
• Perform PCB design, test and evaluation on specific control circuit board including gate driver, microcontroller board and others
• Conduct various device characterizations including design and development of verification test systems.
• Performs integration activities including troubleshooting the control system, designing and executing test plans and test automation, to ensure the algorithms functions as designed.
• Documents work results with requirements, design specifications, procedures, and training materials.

Knowledge, Skills and Abilities

• Control System Design: Assist in the design and development of advanced control systems for power converters, considering factors such as efficiency, stability, and grid integration.
• Software Implementation: Collaborate with software engineers to implement control algorithms in embedded software and firmware.
• Testing and Validation: Design and execute test plans to validate control system performance and robustness.
• Hardware Integration: Work closely with hardware engineers to ensure seamless integration of control electronics with power converter hardware.
• PCB Design and Development: Work closely in the PCB design activities including test and verification
• Documentation: Prepare comprehensive documentation of control system designs, including specifications, schematics, and test reports.
• Troubleshooting: Identify and resolve control-related issues during development and product testing phases.
• Compliance: Ensure that control systems meet industry standards and regulatory requirements.

Qualifications

• Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field.
• Minimum of 7 years of experience in controls engineering, with a focus on power electronics field.
• Proficiency in control system design, analysis, and simulation tools (e.g., MATLAB/Simulink).
• Strong programming skills in languages such as C/C++ for embedded systems.
• Experience with hardware-in-the-loop (HIL) testing and control system validation.
• Knowledge of grid integration, grid codes, and power quality standards is a plus.
• Excellent problem-solving skills and attention to detail.
• Effective communication and teamwork abilities.
• Ability to work in a dynamic and collaborative environment.

Responsibilities include but are not limited to:

• Drives a culture of "Do It Safe, Do It Right the First Time" with their actions and their words on a daily basis
• Manages multiple groups globally responsible for the implementation, continuous improvement, and troubleshooting of automation and control systems used for manufacturing ultrahigh purity materials supplied to the semiconductor and photovoltaic industries.
• Directly manage 10-15 US resources and dotted line management of dotted line discipline lead management of 5-10 resources in Asia (Korea, Taiwan, Singapore and Japan). Aptitude to expand reach beyond incumbent countries to France, China and other geographies as Semiconductor Materials globalize.
• Responsible for all design and support activities related to industrial power distribution, process instrumentation, industrial networks, and controls platforms globally.
• Responsible for significant level of Operation support in a 24-7, multi-site production environment including “on call” trouble ticket system for Operation Technology and Distributed Control System Issues.
• Responsible for establishing industry standard best practices across multiple global geographies.
• Responsible for delivering code compliant industrial controls systems for both green field, brown field and Process Development projects.
• Equally adept at self perform, third party and EPC model Automation and Controls and Operations Technology execution models. Ensures sufficient cross trained staff capable of all models globally.
• Responsible for developing and maintaining engineering standards used during project design and execution globally.
• Responsible for coordinating with other design disciplines for the efficient development, transfer and implementation of project requirements detailed on upstream documentation such as the P&ID.
• Responsible for maintaining compliance with internal engineering project execution standards.
• Deep understanding of standard Industrial network architectures globally.
• Understanding of ISA-99 Cyber Security Standard
• Understanding of ISA 85 Enterprise - Control System Integration Standard
• Understanding of ISA-84 Safety Instrumented Systems Standard.
• Responsible for managing the integration of the project into existing site specific industrial network and power distribution systems.
• Responsible for maintaining sufficient resources both internal and external to meet the needs of both capital projects and operational support. Globally manages resources across geographies including systems for remote support.
• Responsible for planning and articulating a roadmap for controls upgrades related to: adoption of best practices, internal minimum requirements, and obsolescence remediation.
• Requires significant creativity and leadership through problem solving
• 15% travel required (with 5% international) mostly to company sites
• Successfully completes all assigned trainings, and monitors the timely completion of training requirements of all direct reports
• Complete all assigned tasks, and monitors the timely completion of tasks assigned to direct reports

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills