Description:

• To perform appointed Senior Fire Safety Manager (FSM) duties for Army Camps as per SCDF regulation but not limited to as below;
• To prepare and execute the Emergency Response Plan (ERP) for the premises and distribute the ERP to the occupants of the premises;
• To conduct daily checks and inspections within the premises and remove or cause to be removed any fire hazards that is found within the premises, and prepare monthly FSM inspection report;
• To supervise the maintenance of fire safety works in the premises and follow up on the repair or replacement as and when necessary;
• To ensure at all times the fire safety requirements contained in the ERP are complied with;
• To conduct in-house fire drills for the occupants of the premises at lease 1 or twice in every calendar year or on such occasion as may be directed by the commissioner or SCDF;
• To conduct at lease 2 table-top exercise within the premises each year and to evaluate the ERP for those premises. To record minutes of meetings and provide feedbacks for improvement;
• To furnish incident reports in the event of fire and other related emergencies, including fire drills and table-top exercise;
• To train, coordinate and supervise the Company Emergency Response Team for the premises in first-aid, fire-fighting and evacuation in the event of fire or other related emergencies;
• To train the occupants in the premises in first aid, fire-fighting and evacuation in the event of fire or other related emergencies;
• To advise and recommend a list of fire-fighting equipment for the Company Emergency Response Team;
• To supervise those premises with Fire Command Centre on the operation in the event of fire and other related emergencies;
• To prepare and implement Arson Prevention Plan for the premises;
• To prepare fire safety guidebook for the occupants of the premises;
• To carry out fire risk assessment of the premises and recommend areas of improvement;
• To endorse annual Fire Certificate Renewal with PE Endorsement;
• To report to the Facilities Operation Manager of the Premises, and perform any other tasks as and when assigned to;

Requirements

• Senior FSM Cert registered with SCDF (A Must)
• 1 - 3 Years experience as Appointed FSM at SCDFJob Description
• Carry out duties as specified by WSH Act.
• Assist in the implementation of the EHS management system
• Ensure all site activities are carried out in compliance with applicable legal requirements.
• Carry out daily WSH inspections including machinery, equipment, plant, installation.
• Functions as the Site EHS Assessor in the verification of the hazardous works.
• Conduct EHS induction course for new employees and contractors.
• Ensure that Risk Assessment and Safe Work Procedure are brief to workers and sub-contractor.
• Identify WSH hazards and implement control measures.
• Preparation of monthly WSH reports, Risk Assessments, Safe Work Procedures and Permit to works submission in accordance with Main Contractor requirements.
• Ensure workers and sub-contractors comply with EHS Management System & applicable legal requirements.
• Maintain and monitor EHS records/ checklists.
• Participate and facilitate in Internal/External audits.
• Investigate and report WSH all incidents & near misses.
• Conduct WSH and other related training.
• Carry out any other duties as assigned by the Project Manager and Management.

Requirements

• Posses to have WSQ advance certificate in WSH or Advance workplace safety and Health Certificate
• WAH assessor certificate.
• First Aider Certificate.
• Has developed a Risk Management Implementation Plan (bizSAFE Level 2)
• Responsible and with a good attitude.
• A team player and ability to work independently.
• Preferably has a minimum of Five (5) years of WSH working experience in construction (Airside).
• Class 3 Qualified Driving License
• Must be able to clear any internal security checks conducted by the Singapore Government.

•To assist the Project Manger, oversee andcoordinate daily operations at construction sites

•Monitor and control material management on site as to ensure proper storage and unnecessary wastage.

•Foster positive communications and relationships with team members, management, vendors and clients.

•Provide for site safety and security, devise and implement site policies and procedures.

•Supervise and evaluate staff, complete employee reviews; keep accurate records of employee attendance and timesheets; provide positive direction to motivate quality performance, discipline personnel when necessary and appropriate.

•Report working progress to managers.

Requirements

•Relevant experiences in construction field

•In-depth knowledge of construciton procedures, equipment & OSH guidelines

•Excellence organizational and leadership skills

•Ability to communicate and report effectively

•Problem solving abilities

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / Automation Engineer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 8.30 am – 6.00 pm)
• Salary Package: Up to $4,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project-related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or overseas
• Project presentation & documentation
• To work with third-party engagement wherever necessary for project-related matters

APPLY NOW!!!

• Diploma / Degree
• Min 5 years of relevant experience
• Proficient in PLC programming is compulsory

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65637 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Willing to work under the sun and at times overtime and on weekend or holiday.Construction worker , can do the timber, rebar job , working at project site ,structural work. not afraid of dirty, not afraid of tired.Operate of machine, Can use construction machine, knowledge of construction safety . At least 10 years of experience in construction industry.Manage site activities, vendors and sub-contractors，assist the Project Manager in the daily execution of work.Attend meeting, coordination, prepare works schedule & site supervision.Ensure installation is carried out as per construction drawings.Ensure that works are executed within an acceptable standard of workmanship.Responsible for all aspects of site safety.Proven experience as construction worker . Experience in operating equipment like trench rammers , drills, pneumatic hammers. Knowledge of mixing and pouring constructin material ( concrete, sand, grout etc. ) Knowledge of basic engineering and construction principles and methods.Be bilingual,fluent in English&chinese.

Experience required

· Plan, organize and arrange daily construction activities.

· Supervise the direct workers and to give instruction to the sub-contractors.Coordinate with land

surveyors and sub-contractors on all setting out works.

· Liaise with QP(S) representative regarding standard of workmanship. To check if the works are

carried out strictly in compliance with the contract specifications and requirements for the purpose of

general quality control.

· Liaise with QP(S) representative for inspection of site works.

· Organize and supervise house-keeping and safety implementation.

· Control material wastage and unproductive deployment of workers.

· Report daily manpower and machinery to the Project Manager.

· Follow up and ensure environmental, safety and health policy compliance.

· Follow up and implement logistic planning set out by Planning Manager

· Work as purchaser to source for supplier, issue PO and prepare supplier payment application

Qualification requirements or equivalent

· Diploma/Degree holder in Construction/Building or related discipline.

· Positive personality and good team player.

· Meticulous and responsible.

· Able to multi task and work in tight schedules.

Job Description:

Could supervise the process of shopping mall construction work on site, arrange manpower, prepare the materials and tools and machines, hand over to client.

Requirement:

At least 5 years supervising or engineering working experience.

At least Diploma qualification in engineering or civil engineering.

Self motivation, good attitude.

Could finish the job independently.

WE ARE A FOOD PROCESSING AND DISTRIBUTION COMPANY HEAD QUARTERED IN SINGAPORE. LOOKING FOR THE IDEAL COLLEAGUE WHO CAN PERFORM THE FOLLOWING:

• YIELD MANAGEMENT OF PROCESSING RELATED GOODS
• CONVERSION OF GOODS IN OUR COMPANY SYSTEM I.E. WHOLE FISH TO FILLETS
• INVENTORY MANAGEMENT INCLUDING REORDERING OF GOODS
• ENSURE PROPER SOPS TO MEET LOCAL AND COMPANY REQUIREMENTS WHICHEVER IS HIGHER I.E. LABELLING, OPERATING PROCEDURES
• MAINTAIN & ENFORCE HYGIENE AND SAFETY FOR THE WORKPLACE
• CREATE AND IMPLEMENT SOPS WHERE NEEDED
• LEAD AND TRAIN THE TEAM ON ALL COMPANY STANDARDS
• POINT OF CONTACT BETWEEN MANAGEMENT AND THE GROUND TEAM
• ENUSRE HALAL COMPLIANCE

ONLY FRESH GRADUATES FROM POLYTECHNIC OR UNIVERSITY (2023 AND 2024) MAY APPLY.

SINGAPOREANS, PR AND WOR PERMIT HOLDERS ARE ALL WELCOME.

WORK AREA: WESTERN PART OF SINGAPORE NEAR CLEMENTI/WEST COAST.

5 DA WORI

• Location: North
• 5 days work week
• Basic up to $4500
• AWS provided
• MNC

Job Scope:

• Monitor and manage the credit control function.
• Assess and review credit terms and limits for customers.
• Analyze creditworthiness of new and existing customers.
• Monitor and track overdue payments.
• Initiate collection activities and follow up on outstanding accounts.
• Coordinate with sales and customer service teams to resolve credit-related issues.
• Prepare reports on credit status and aging accounts.
• Implement credit control policies and procedures.
• Collaborate with internal stakeholders to improve credit processes.
• Provide recommendations for credit policy enhancements.
• Ensure compliance with credit management regulations.

Job Requirement:

• Good working experience in credit recovery / AR collection.
• Able to work independently without much guidance

To Apply, kindly click on the "APPLY NOW" button.
We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Summary:

• Basic up to $6000+Bonus
• 5 days (Monday - Friday), 8.30am - 6pm
• Industry: Construction (Electrical/ACMV)
• Company with great career prospect

Responsibilities:

• Assist in contract administration, prepare progress claims and liaise with clients on claims and variation costs.
• Prepare quotations, compare prices, and prepare bill of quantities for tender.
• Conduct cost analysis and contract administration.
• Prepare tender documents.
• Perform quantity surveying for projects.
• Any relevant duties as required.

Requirements:

• Candidates with Construction Quantity Surveyor (Electrical/ACMV) are welcome to apply.
• Entry level welcome to apply, training will be provided.

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | See Yew Jin (R22103957)

Job Description:

• To assist Safety Manager on all safety, health, environmental, and welfare matters, to ensure the Project complies with its statutory obligations, safety requirements, and aerodrome safety standards.
• To be responsible for health, safety, and environmental control, and to assist Safety Manager to ensure that all works adhere to the procedures and instructions.
• To assist Safety Manager in liaising and co-ordinate with stakeholders, authorities and agencies and other Consultants employed by Developer.
• To put up daily situation reports.
• Ensure risk assessment and safe working procedures are correctly executed on-site.
• To conduct daily health, safety, and environmental inspections, prepare reports and follow up with Project Safety Team / Contractors for closure.
• To carry out investigations into all accidents and near-miss incidents and to record the findings on the relevant forms.
• Wear appropriate personal protective clothing/equipment and observe all safety requirements/procedures.
• To implement and monitor appropriate safety measures in accordance with the Workplace Health and Safety Act and Safety Management System.
• To highlight areas where training/certification is required to meet the standards imposed by Legislation, Approved Codes of Practice, or H.S.E. guidance

Requirements

• At least 03 years of Project relevant experience in the construction industry preferably 2 years with the developer/main contractor.
• Must be a registered Workplace Safety and Health Officer with MOM.
• Has developed a Risk Management Implementation Plan (bizSAFE Level 2) or equivalent

Responsibilities:

Support strategic equipment control and/or supplier data collaboration activities

• Support world-wide alignment and continuous improvement of practices.
• Evaluate global needs and cultivate global relationships.
• Support and mentor equipment control teams or data collaboration teams worldwide.
• Work with subject matter experts (SMEs) to identify business process gaps and Best Known Methods (BKMs) to address.
• Facilitate communication plan for all SWAT activities to/from stakeholders, participants, and management.
• Refine SWAT charter, and build roadmap going forward for world-wide alignment and continuous improvement of practices.
• Evaluate the quality of data collected, drawing conclusions based on this data and initiating follow-up action items.
• Partner with GQ teams, OCT PEE, OCT MAE, SMAI and IT to ensure all business needs are properly documented, validated, and escalated as needed.
• Determine if project objectives have been met or if more effort is required.
• Provide direction or facilitation of practical application of equipment control or supplier data collaboration systems within the MFG environment.

Demonstrate Individual Competence/Technical Expertise

• Provide technical consulting and hands-on assistance to Fab teams for creation and/or identification of best solutions.
• Evaluate third-party software and/or hardware selection.
• Recognize functional and business process gaps. Formulate proposals for closing them.
• Increase technical expertise by participating in classes conferences and researching existing literature and existing Micron expertise.

Program Management

• Demonstrate ability to move projects effectively through project lifecycle – initiate, plan, execute, and close – while balancing time, cost, quality, scope and risk/opportunity constraints.
• Motivate stakeholders and all project team members to take ownership of project and its success.
• Direct and coordinate the activities of others to accomplish project tasks successfully.
• Define metrics to gauge project success.

Communication

• Provide periodic updates based on project criticality to stakeholders and team members on project status, progress, and roadblocks/opportunities..
• Offer and communicate strategic ideas and thinking to meet corporate objectives. Listen to customer’s and stakeholder’s input/feedback and act to maximize benefit to Micron and meet corporate goals.
• Build and maintain external and internal relationships to broaden influence and increase learning opportunities in the PCS area.
• Provide communication to the World-wide equipment control and/or supplier data collaboration groups on lessons learned, project repositories, summits, new technologies, conference proceedings and Best Known Methods (BKMs).
• Demonstrate cultural sensitivity - Show respect for different cultures and languages.
• Communicate effectively with vendors/suppliers. Understand and use appropriate communication channels (other Central Team members, Purchasing, etc.). Clearly and accurately communicate Micron’s needs and objectives to vendors/suppliers. Adheres to company ethics and confidentiality policies regarding vendors/suppliers.

Job Scope:

• Responsible for obtaining timely payments from customers within agreed payment terms, maximizing cash flow and reducing AR outstanding.
• Resolve billing dispute with internal and external party
• Ensure billing and allocation are perform accurately and promptly
• Conduct credit evaluation and periodic review on new or existing customers
• Review and release orders on credit hold to ensure daily operation is carry out smoothly
• Credit control and debt recovery
• Timely completion of month end activities
• Prepare month end reports and perform variance analysis
• Assist in continuous process improvement projects or new initiatives
• Liaise with internal and external auditor

Job Requirement:

• Min Diploma/Degree in Accountancy or any other equivalent certifications
• Able to start work immediately or within a short notice
• Able to use SAP would be an added advantage

Interested candidates do send in your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

• 5 days work week
• Location: North/North East
• Basic up to $4600
• AWS & VB provided

Job Scope:

Quality System Engineer - Electronic, PCBA

• Oversee implementation of various management systems and business accreditations.
• Maintain and ensure appropriateness of Quality Manuals and Procedures.
• Analyze current and future procedural needs of the business.
• Manage the internal audit system and corrective action reporting system.
• Conduct Quality Systems audits and train/guide other auditors.
• Host external Quality System audits.
• Review Quality procedures related to plant improvement initiatives.
• Maintain Standard Operating Procedure content and coordinate issuance.
• Collect quality data for monitoring targets.
• Assist with quality awareness training.
• Undertake special projects as required.
• Ensure quality control through appropriate reviews.
• Support/lead process and continuous improvement activities.
• Manage and monitor equipment calibration.
• Coordinate with Outsource Management for subcon selection and approval.
• Establish and improve subcon quality assurance and development system.
• Perform audits on new and existing subcons for quality evaluation.
• Involved in new production introduction and product transfer to subcon.
• Manage Corrective Action Report process and resolution.
• Work with subcons on customer complaint 8D.
• Develop and maintain policies to measure and ensure subcon performance.
• Monitor key quality metrics (Subcon OTD, system, process audit, yield).
• Establish sampling plan and testing criteria for incoming, site inspection or subcon production.

Job Requirement:

• Diploma/Degree in engineering studies with relevant working experience in Quality Management Experience.
• ISO9001, ISO14001, ISO45001, ISO27001, ISO17025, MID-D, LNE, QC80000, IECEx80079 are the usual quality management system to be utilize across the work routine.
• Candidate with relevant experience in Electonic Manufacturing/PCBA Industry will be prioritized.

The successful candidate will be part of the Financial Planning & Control department in Finance Division.

Key Responsibilities

• Monitor, review and post monthly accruals for expenditure items.
• Handle divisions' queries on expenditure accounting.
• Review and monitor provision accounts and work with divisions/stations to clear provision/suspense accounts.
• Ensure that month-end closing activities (for example, amortisation of prepayments, raising of any required journal entries, etc.) are completed on time.
• Review and raise invoice/credit notes to subsidiaries/third parties on a timely basis.
• Assist with any required preparation of monthly/quarterly/half-yearly/annual reports.
• Assist the Executive in troubleshooting system issues, handling system enhancements, and performing User Acceptance Testing (UAT) where necessary.
• Assist in budgetary control procedures (for example, monitoring of operating expenditure against budget).
• Assist in annual operating budget exercise and/or forecast exercise.

Requirements

• Diploma in Accounting, Business Administration or Finance.
• Able to work independently, collaboratively and under tight deadlines.
• Adaptable to changes and a problem solver.
• Good interpersonal skills and communication skills.
• Proficient in Microsoft Office, knowledge of SAP will be advantageous.

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

Description:

• To assist the Authority’s appointed consultants and Resident Technical Officer (RTO) in carrying out supervision works on site.
• To keep and maintain site record on progress of works, instructions given to contractors,materials delivered to site, daily activities and weather conditions at site, number of workers and visitors at site and any other significant information.
• To supervise and keep records of day works.
• To attend site / co-ordination meeting as directed.
• To assist in enforcing the safety requirements.
• To comply with Authority’s appointed consultants’ Quality Assurance Procedure for construction works.
• To carry out site supervision and inspection of the works including any off-site manufacturing as instructed by the Authority’s appointed consultants to ensure that the works are constructed to required quality and accuracy.
• To monitor progress of the works on site and at any off-site manufacturing facilities and report delays immediately.
• To provide standing supervision as and when directed by the Authority’s appointed consultants.
• To maintain proper and updated daily records of all works done, including records of tests, inspections, status of works, safety, site diary, materials and equipment on site, labour,dayworks, provisional quantities, etc.
• To check that contractor executes preliminaries items.
• To check services routes and contractor’s setting out and report any deviations to the Authority’s appointed consultant team.
• To verify reports and claims submitted by contractors.
• To record all variations as instructed or approved by Authority’s appointed consultants.
• To attend to Authority’s appointed contractor’s queries and co-ordinate works by Authority’s appointed main contractor and his appointed direct contractors.
• To inspect and take over completed works.
• To supervise and witness testing commissioning of M&E services or systems.
• To provide weekly reports of site activities and problems on-site, including how they were resolved.
• Attend meetings in the Authority and the Authority’s appointed consultants’ offices when necessary to discuss issues arising on-site.
• To familiarize with the drawings, and contract specifications and highlight deviations.
• To monitor and report on the contractor’s progress and performance and maintain site records of the works which should include all circumstances and events occurring during the construction stage.
• To attend TOP or CSC inspections by Registered Inspectors, BCA and all other relevant authorities’ representatives for each respective discipline.
• To carry out and report assessment on Construction Quality Assessment system (CONQUAS).

Requirement:

• Diploma from Polytechnic in relevant discipline or hold an equivalent qualification.
• Preferably 5 years local supervision as a resident technical officer for Architectural, Civil, and Structural works.
• Be conversant in local legislation, regulations, and codes

Responsibilities

• Overall management for the project with respect to contractual, budget, resources, design, procurement, construction, quality and safety.
• Lead the project team for the implementation and execution of works as according to planned schedule.
• Execute projects according to schedule and tender specifications within contract budget
• Manage sub-contractors performance
• Conduct regular meeting with sub-contractors and project team
• Monitor material and equipment usage
• Attend meeting with clients, consultants and sub-contractors
• Preparation of progress reports
• Resolve on-site contractual issues with good documentation.

Requirements

• Bachelor’s Degree in Civil Engineering recognised by PE Board or equivalent.
• Minimum 6-8 years working experience in project management.
• Possess all safety compliance certification
• Strong communication and coordination skills
• Good leadership skills and able to lead a team
• Positive attitude and able to meet deadlines

As a Manufacturing Central Team Quality SEAL Senior Engineer/Manager at Micron Technology, Inc., you will be a member of the worldwide Quality Team managing QDR, reducing variation and deviations for all Micron Fabs. Devising strategies to address specific problems. Specific to your role, your work will encompass the responsibilities of handing resources to enable the timely development of Quality Program for the network. Managing the respective Quality programs that will make FE Quality a success. As a solution provider, you will work with SMEs to identify their needs and to develop and implement reporting dashboard and data structure to meet their requirements for quality improvement. This will also extend to recommending improvements to meet the demands of swiftly changing interface technology. Setting up performing backups procedures for maintaining our data. Providing actionable insights in Frontend Global Quality Program through the analysis of facts and figures acquired from the network.

Additional Job Description:

• A solid and wide-reaching foundation in project and program management across different geological locations.
• Independent and self-motivated to see through the completion of projects
• In addition to possessing technical know-how, being communication savvy and be creative problem solvers
• Demonstrated high level problem solving skills, time management, organization and multitasking abilities
• Excellent verbal and written communication skills

• To see that the prescribed quality control measures are implemented and maintained throughout the life of the project.
• Monitor project progress and escalate if any significant impacts of out-of-scope aspects, and seek relevant guidance from the inline manager.
• To assure that each individual understands his/her own responsibilities of those whom he/she is working
• To utilize skills to run multiple projects as efficiently as possible.
• To liaise with all the material suppliers and sub-contractors and to ensure all supplies and works are completed on time.
• Plans all phases of the construction lifecycle from initiation to completion.
• Obtains all necessary regulations and permits.
• Orders necessary supplies, tools, and equipment.
• Collaborates with architects, engineers, electricians, and other specialists.
• Makes sure projects are aligned with agreed-upon plans.
• Manages site engineers and oversees their work.
• Excellent oral and written communication skills to effectively communicate across teams, customers, and specified project designers/developers
• Should have the ability to work on tight deadlines.
• Good leadership skills and the ability to present a professional image to inspire and guide the new team members.
• Writes and submits testing and inspection logs, quality assurance reports, and punch lists.
• Ensures that all local, state, and national building codes and regulations and safety precautions are followed.
• Act as the point of contact and communicate project status to all participants
• Create and maintain comprehensive project documentation, plans, and report
• Assign tasks to internal teams and assist with schedule management
• Help prepare budgets and analyse risks and opportunities
• Ensure standards and requirements are met through conducting quality assurance tests

Roles & Responsibilities

• Implements appropriate control measurements in accordance with QECP Design
• Ensure compliance with the latest environmental regulations
• Coordinate with the Construction Manager and QECP on the ECM Plan
• Proper documentation of all EHS records, certificates, notices and official related EHS correspondence
• Organize HSE promotion and health campaigns
• Assist Safety Officer in planning and directing the HSE functions
• Any other duty required to be performed by ECO

Requirements

• Must be NEA Registered ECO
• Registered ECO with more than 3 years post-registration and relevant practical experience in Civil Engineering Construction works with LTA Projects
• Good knowledge of Government Regulations relating to Occupational Safety, Health and Environmental
• Preferred to have experience in managing OHSAS 18K, ISO 14K, ISO9K

1. Responsible for collecting, receiving, technical support and quality improvement of product problems;
2. Responsible for statistical analysis of product after-sales data, identification of batch risks and improvement of parts that need to be optimized;
3. Responsible for Initial Quality Survey (IQS) data analysis;
4. Responsible for organizing overseas after-sales problem research.

Requirement：

1. Strong communication and ability to work within cross-functional teams, including internal and external partners.

2. Fluent in Mandarin and English.

3. Strong knowledge of Statistical Process Control (SPC) and/or Design of Experiments (DOE) principles.

4. Capable of adapting to changing priorities and responsibilities flexibly to support business needs.

5.Minimum Bachelor's degree in Materials Science, Engineering, Electrical Engineering,

Responsibilities

Managing a team of technical supervisors on site to ensure that all works comply fully with regulatory and client's requirements

• Work closely with Professional Engineers, regulatory authorities and contractors to provide planning, design and supervision leadership not only to solve site problems, but also to ensure timely completion of the projects

• Responsible for implementing and sustaining the site supervision quality & safety assurance system

• Carry out supervision of structural & geotechnical works by identifying any non-conformity of contractor's works on site

• Understand drawings & contract documents in carrying out the works

• Implement the site supervision quality and safety assurance system

• To carry out regular site checks on contractor & ensure compliance with health and work safety in accordance with MOM regulation

• Attend site progress and technical meetings with the project team and Client to resolve site and technical issues

• Ensure that proper site documentation for ongoing works, site meetings, safety records, method statements, shop drawings, as built submissions etc., are well managed

Requirements

• Degree in C&S Engineering from a University accredited by the Professional Engineers Board, Singapore

• Must be accredited as a Resident Engineer with BCA/IES/ACES

• Min. 5 to 8 years’ site working experience in Singapore for civil engineering, pavement & ground improvement project working experience would be advantage point

• Working experience in road, drain, earthwork, retaining wall, building and airfield construction would be preferable

• Strong knowledge of C&S details, working drawings, shop drawings and C&S construction method

• Strong knowledge of LTA, PUB, NParks and BCA requirements and regulation for construction.

• Good supervisory and leadership skills

• MNC, attractive remuneration package
• Salary up to $8000, AWS, bonuses, Dental, medical
• Leadership skills
  North-East, 5 days work week
• Career advancement

Job responsibilities:

• Provide on-site product & system commissioning/servicing support.
• Support on product and application presentation to new and existing customers.
• Project/systems configuration and coordination, new product launch.
• Assist in distribution channels-technical related.
• Brain storming of ideas to support on special projects.
• Providing technical support to sales team.
• Handling complaints on technical issues and support marketing activities.

Requirements:

• Possess a Degree or Diploma in Engineering (with relevant experience).
• Knowledge of water treatment, hygienic and steam, food and beverage, pharmaceutical, semi-conductor industries is an added advantage.
• Minimum 8 to 10 years’ experience in Industrial/Technical products, particularly valves, sensors and process control instrument.
• Strong leadership skills and able to lead a team.
• A hands-on person.
• Able to communicate with customers on building solutions.
• Strong communication skills, Dynamic and goal-oriented, team player.
• Computer and PLC literate, proficient in MS Excel, Word, Powerpoint
• Knowledge of Adobe Photoshop/InDesign will be an added advantage.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Description & Requirements

• Responsible for the implementation and monitoring of Workplace Safety & Health and Environment Management Systems at work sites.
• Conduct regular WSH inspections and follow-up actions to ensure safety compliance
• Ensure all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.
• Ensure the Company meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting
• Ensure the completion and regular review of risk assessments for all work equipments and operations
• Ensure all accidents are documented, investigated and recommended improvements implemented.
• Coordinate the development of health & safety policies, systems of work and procedures.
• Inspect project sites to ensure safety measure are being carried out at all times

Requirements:

• Possess relevant safety certificates (Eg Advanced Certificate in WSH, Safety Officer's Course or equivalent)
• Minimum 5 years of relevant working experience in Building Construction
• Familiar with ISO45001, ISO 9001 & ISO 14001

• Up to $3,800 basic + Bonus + Benefits
• Permanent role/ 5 workdays/ [HQ] Paya Lebar area

Our client is a reputable MNC and leading construction company diverse in both local and overseas projects.

Job Responsibilities:

• Reporting and supporting HOD in overseeing regional construction projects
• Responsible for project control process, including compliance, regulations, and facilitating project stakeholders.
• Document control
• Ensuring Safety and Environment standards are met
• Data Analysis, data collection, and reporting of the construction projects, including cost and budgeting, scheduling, manpower management etc.
• 
  

Job Requirements:

• Diploma/ Bachelor’s degree in Engineering, business, and or equivalent.
• Good knowledge in MS office.

Other Information:

To apply please click on APPLY NOW and submit your resume with the following details:

• Reason for leaving each past & current employment
• Salary drawn for each past & current employment
• Expected Salary
• Earliest availability date

We regret that only shortlisted candidates will be notified.

Lionel Cheow

EA License | 14C7092

EA Registration Number | R1105005