Reporting directly to the manager and fulfilling the Manager's duties in their absence.

* Being well-versed in internal operations.

* Taking minutes at meetings.

* Forwarding and distributing mail as required.

* Preparing and filing relevant documents.

* Supporting managers in devising plans in order to improve business performance.

* Monitoring various operational aspects.

* Collaborating with the logistics office.

* Assigning tasks to employees and hiring new staff.

* Providing training, instruction, and guidance to subordinate employees to ensure their knowledge of company products, fabrication and assembly methods, management skills, and the effective use of accepted work processes and standards.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Responsibilities:

• To provide supervision services to ensure the Contractor comply with the Authorities’ Requirements and Agencies’ requirements;
• To review the Contractor’s drawings for discrepancies, missing details, etc. and to highlight such findings to the Company in a timely manner;
• To supervise transmission cable and building development project works including civil, road works and other associated works
• To ensure contractor carried out works not affecting/compromise safety, environmental and health matters;
• provide standing supervision to all civil and structural works compliance with the Authority’s Requirements including, but not limited to, the following for completion of the project works:
• Temporary Works relating to excavation, strutting, earth retaining and stabilising structures (ERSS), ground improvement, if required;
• Safety, Health and Environmental control measures, etc.;
• Utility diversions and protection works/supports to utilities, if required;
• Risk registers, hazard logs, etc;
• Mobilization and demobilization of vehicles, machineries and equipment etc.
• Cable preparation and cable pulling works, etc;
• Construction of Joint Bay and associated work, etc;
• Cable jointing works in joint bay, etc;
• Testing and commissioning works related to transmission cable, etc;
• Weekly summary reports on site management to highlight safety issue and propose any improvement to the Company;

Requirements:

• Registered as Resident Technical Officer with BCA/IES/ACES;
• Minimum Three (3) years of relevant experience in projects similar in nature to the projects

Job Description :

- Perform day-to-day administrative and secretarial duties

- Provide translation and administrative assistance to company’s delegate/associate

- Run administrative errands or representing the company when necessary

- Attend work-related social events, functions or training when necessary

-Willing to work on off days if necessary

Roles & Responsibilities

• To engage in project engineering of ACMV Systems.
• Responsible for planning, scheduling, forecasting, conducting and coordinating the technical and management aspects of projects.
• To lead and communicate with our Site Engineer and Site Supervisor.
• Controlling the cost of the materials and labour.
• Attend site meeting, inspection and monitoring of project progress.
• Liaising and coordinating with all parties involved in the projects such as consultants, main contractors, sub-contractors, suppliers, local authorities, environmental agencies and federal entities etc to ensure successful implementation of the project.
• Ensure that all the construction safety rules and regulations are being observed.
• Scheduling the construction work of the day.
• Laying down the preferred construction methods.
• Ensure proper project documentation.
• Monitor and report project progression to management.
• Any other tasks assigned by the management.

Job Requirements

• Min. Degree in Mechanical Engineering or its equivalent
• Min. 3 years of experience in ACMV works.
• A team player and possess problem-solving, coordination and management skills.
• Able to work independently and work as a project team
• Able to carry out prescribed work in a safe, competent or compliant matter.
• Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills
• Self-motivated individual, with phenomenal confidence working with diverse partner groups
• Able to perform using AutoCad and other drawing applications
• Knowledge in AutoCAD drawings
• Good team player and handle stress and deadlines.

We offer attractive remuneration package to the right candidate.Interested candidates are invited to submit detailed resume stating:-

• Current salary;
• Expected salary;
• Reasons of leaving and
• Date of availability.

Key Requirements

1. Test Management Experience: Proven track record in test management, specifically for Data and Analytics projects. Experience in managing testing phases for large data platform migration engagements.
2. Power BI Expertise: Hands-on experience with Power BI for data visualization and analysis. Ability to develop and interpret complex reports and dashboards.
3. SQL and Database Knowledge: Proficiency in SQL, with a preference for candidates experienced in Databricks or Azure SQL. Understanding of database structures, theories, principles, and practices.

Key Responsibilities

1. End-to-End Test Management: Oversee all aspects of testing within large data platform migration projects, ensuring comprehensive coverage of data integrity, performance, and functionality.
2. Stakeholder Management: Liaise with business users and stakeholders to ensure testing objectives are aligned with business needs. Effectively communicate test progress, insights, and outcomes.
3. Test Strategy Development: Develop and document a comprehensive test strategy, detailing methodologies, tools, timelines, and resource requirements.
4. Reconciliation Strategy Preparation: Prepare a reconciliation strategy to ensure data accuracy and consistency post-migration. Implement checks and balances to validate data integrity.
5. Test Plan and Case Review: Oversee the creation of test plans and test cases, ensuring they are robust and cover all critical scenarios. Review and provide feedback for continuous improvement.
6. Test Team Management: Lead and manage a geographically distributed test team based in Singapore and India. Coordinate efforts, delegate tasks, and ensure efficient team collaboration and productivity.
7. Reporting and Analysis: Regularly report on test progress, challenges, and outcomes. Analyze test results to identify trends, issues, and areas for improvement.

Qualifications

• Bachelor’s or Master’s degree in Computer Science, Information Systems, or a related field.
• Strong leadership skills with experience in managing cross-cultural teams.
• Excellent communication and interpersonal skills for effective stakeholder engagement.

What we offer you

Come for the distinctive experiences you have helping forward-thinking corporations, non-profits, and governments push the boundaries of digital innovation. Stay for the limitless learning opportunities that encourage you to master Microsoft and pursue big ideas. Enjoy ambitious growth for yourself as part of Avanade’s people-first culture with benefits like employee share purchasing, flexible work arrangements, a commitment to diversity and inclusion, and competitive pay.

For GDPR reasons, kindly submit your application via the link below:-

https://careers.avanade.com/jobsenus/JobDetail/Data-Test-Manager/72617

Breaking the bias through strength and growth.

https://www.avanade.com/en/blogs/inside-avanade/women-at-avanade/breaking-bias-strength-growth

How to have the tech career your want.

https://www.avanade.com/en/blogs/inside-avanade/avanade-spotlight/have-the-tech-career-you-want/

• Familiar with Workplace Safety and Health act and all applicable legislations
• Able to exercise due diligence in the assessment of risks and recommendation of appropriate control measures
• Ensure compliance of workplace, safety and health issue
• Enforce and monitor safety conduct on site
• Registered WSHO with MOM
• Possess good knowledge of safety, health, environmental protection
• Familiar with ISO 14001 and OHSAS 18001
• Possess strong knowledge in risk analysis and risk control
• Class 3 Driving Licence

• Conduct regular PLC and control system maintenance to optimize performance.
• Monitor system performance continuously to achieve maximum uptime.
• Coordinate projects for automation improvements, ensuring seamless implementation.
• Identify and troubleshoot system abnormalities, offering technical solutions.
• Initiate and lead continuous improvement projects for enhanced efficiency.

Requirements:

• Degree in Electrical Engineering or equivalent.
• Minimum 2 years in related working experience.
• Experience in PLC systems.
• Experience in ELV systems.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R22109628

• Manage end-to-end recruitment process
• Administer on-boarding and off-boarding programs
• Coordinate and communicate with other departments to meet staff training needs
• Manage staff training matter and administer training related funding and claims
• Ensure the correct recording of all relevant record logs and documentation
• Organise and execute employee engagement and welfare activities
• Maintain and update employees' personal files
• Follow-up on contract renewal and expiry
• Handle employee relations matter
• Handle HR letters and correspondence
• Support HR activities and initiatives
• Provide support on office administrative matter
• Other general HR admin duties

We are actively seeking a highly experienced Project Manager with a minimum of 5 years or more in-depth expertise in marine foreshore structures. The successful candidate will demonstrate proficiency in marine piling and civil works, overseeing projects from initiation to completion while ensuring adherence to quality standards and safety regulations.

Responsibilities:

Lead and manage marine foreshore structure projects, specifically focusing on marine piling and civil works.

Develop comprehensive project plans, defining scope, objectives, deliverables, timelines, and budget requirements.

Utilize specialized knowledge in marine construction techniques, including but not limited to pile driving, seawall construction, and other marine infrastructure projects.

Monitor and track project progress, addressing any issues or risks related to marine engineering and construction.

Collaborate with clients, engineers, and other stakeholders to gather project requirements, set expectations, and communicate project updates.

Manage project budgets, ensuring efficient allocation of resources and adherence to financial targets.

Demonstrate expertise in environmental considerations and regulatory compliance associated with marine construction projects.

Foster a collaborative and safety-focused team environment, promoting open communication and knowledge sharing.

Qualifications:

Bachelor's degree in Civil Engineering, Marine Engineering, or a related field.

Minimum of 5 years or more of hands-on experience in project management within the marine foreshore structure sector.

Proficient in marine piling techniques and civil works associated with marine construction.

Strong knowledge of project management methodologies and tools.

Excellent leadership, communication, and interpersonal skills.

Ability to prioritize and manage multiple marine construction projects simultaneously. Familiarity with environmental regulations and permitting processes related to marine construction projects.

KEY ACTIVITIES / ACCOUNTABILITIES

• Administration of credit policies, processes and internal controls to govern the credit control and collection function
• Credit assessment and credit review function
• Payment follow-ups and enforcement of assigned credit limits/policies
• Active collection process involving calling, email, site visits and other appropriate means
• Monitor, ensure accurate and timely payment recovery
• Investigate and resolve discrepancies relating to non-payment of invoices
• Coordinate and build strong relationship between customers and internal stakeholders to resolve issues at root cause and enable smooth collection
• Prepare regular and monthly credit related reports
• Organise routine collection meetings with sales team
• Handle Legal proceedings, Small Claim Tribunal and 3rd party collection agencies
• Prepare month-end and year-end closing reports
• Ensure compliance with company financial standards

ESSENTIAL EDUCATIONAL AND / OR TRAINING QUALIFICATIONS & CERTIFICATES

• Diploma and above qualification in Accountancy/Finance/Business or equivalent

PREFERRED EXPERIENCE AND KNOWLEDGE

• Minimum 3 years’ experience in credit control
• Disciplined, well-organised and good communication skills
• Able to work independently with minimum supervision
• Pro-active
• Be a change ambassador
• Meticulous, organised and good attention to details
• Good interpersonal and communication skills
• Strong computer literacy especially in Microsoft Excel, PowerPoint and accounting software.

Overview

The job-holder assesses, implements and evaluates infection control practices by nursing staff. The job-holder is responsible for staff education and competency in infection control.

Job Responsibilities

Primary Responsibilities:

• Assesses, plans, implements and evaluates infection control practices of nursing staff, doctors and all healthcare workers in AH
• Conducts teaching for nursing, paramedical and medical staffs and students in infection control practices and guidelines
• Coordinates and collaborates with other healthcare team members and service providers on infection control practices and guidelines
• Conducts and evaluates audits on infection control practices
• Reviews and develops infection control policies and procedures in consultation with nurse managers, doctors and Infection Control Committee
• Compiles information on epidemiological organism and nosocomial infection data and initiates actions where necessary
• Reviews, records and completes data for reporting to the National Infection Prevention Committee, Ministry of Health
• Carries out investigations, conducts follow-ups during major outbreaks in the unit and / or hospital
• Plans, implements and evaluates in service talks and training courses / activities based on infection control
• Ensures patient care delivery follows established standards of care and infection control policies
• Applies understanding of prevention of medico-legal issues in relation to patient care
• Prepares reports on infections and other related statistics required by AH, Medical Affairs (Quality Assurance) and / or MOH, and other departments upon requests

Secondary Responsibilities:

• Acts as a resource person to nursing, medical, paramedics and administrative staff on issues relating to outbreaks and infection control issues. Reports to relevant hospital / medical administrators when required
• Updates and maintains relevant infection control statistics
• Participates / leads in quality improvement / research projects
• Participates / leads in unit-based infection control team
• Mentors newly appointed Nurse Clinicians
• Follows up with accidental sharps / mucus membrane exposures to blood and body fluids
• Informs and notifies wards and relevant staff / or government authority of patients with communicable disease
• Assists in arranging prompt isolation of infected patients in co-operation with nursing managers / nursing staff
• Updates and implements hospital infection control policy in consultation with Chairman and the Infection Prevention Committee
• Conducts orientation programs for nursing staff and students
• Takes on additional responsibilities or tasks as assigned by the Senior Nurse Clinician, Deputy/Assistant Director (Nursing) and Chief Nurse

Requirements:

• Registered Nurse with at least 9 years of post-registration clinical experience, of which 2 years must be as Assistant Nurse Clinician
• Diploma in Nursing with relevant post-basic advanced certification and Degree in Nursing from recognized training institution as approved by Singapore Nursing Board, and certification / prior working experience for a year in infection control.
• Technically skilled, competent and able to work independently
• Good interpersonal and communication skills
• Computer literacy skills –MS Word, MS Excel and PowerPoint

• Attend discipline engineering meetings to become familiar with design, special issues, etc. and to provide construction input and information when necessary. Attend subcontractor weekly and special meetings as required to monitor status and identify critical issues that may require owner input.
• Assist in developing subcontract requisitions as needed.
• Understand the construction scheduling logic and critical path with focus on the piping work. Monitor subcontractor progress and help EPCM look ahead to future steps necessary to keep construction progress on schedule. Also monitor the progress of Vendor’s personnel and support in solving interface issues will be with the responsible parties.
• Identify critical work and make sure that team is informed of why the work is critical and when the work will be done. This could be technically critical work that must be witnessed (torque of bolted connections) or safety critical work (hazardous lift, work near energized equipment). This is done so that Evonik specific expertise can be brought to bear on the critical issues. Some of the work on the SIMEX project is taking place in a running plant, and these interfaces are critical. Managing or assisting in managing the interface between the project and the running plant will be a considerable portion of the incumbent’s work.
• Review Field Instructions (field changes for subcontractor) for accuracy and get appropriate approvals within Evonik.
• Review and monitor implementation of Piping Inspection and Test Plans (ITPs), witness as needed hold points or critical steps. Check that test and acceptance documentation is in order. See that non-conforming deliveries and workmanship are documented and corrected.
• Support the safety program by participating in safety walks and other safety events. Develop and support alignment between EMSEA and SIMEX safety programs and emergency response plans. Set a good example by following all safety rules and recommendations.
• This is not an exhaustive list of the work that may be required of the person filling this position. For example, the incumbent may assist with commissioning and start up tasks.

* Reporting directly to the manager and fulfilling the Manager's duties in their absence.

* Being well-versed in internal operations.

* Taking minutes at meetings.

* Forwarding and distributing mail as required.

* Preparing and filing relevant documents.

* Supporting managers in devising plans in order to improve business performance.

* Monitoring various operational aspects.

* Collaborating with the logistics office.

* Assigning tasks to employees and hiring new staff.

* Providing training, instruction, and guidance to subordinate employees to ensure their knowledge of company products, fabrication and assembly methods, management skills, and the effective use of accepted work processes and standards.

Overview
The job-holder assesses, implements and evaluates infection control practices by nursing staff. The job-holder is responsible for staff education and competency in infection control.

Job Responsibilities
Primary Responsibilities:
- Assesses, plans, implements and evaluates infection control practices of nursing staff, doctors and all healthcare workers in AH
- Conducts teaching for nursing, paramedical and medical staffs and students in infection control practices and guidelines
- Coordinates and collaborates with other healthcare team members and service providers on infection control practices and guidelines
- Participates and assist with audits on infection control practices
- Reviews and develops infection control policies and procedures in consultation with nurse managers, doctors and Infection Prevention Committee
- Compiles information on epidemiological organism and nosocomial infection data and assist with the initiation of actions where necessary
- Carries out investigations, conducts follow-ups during major outbreaks in the unit and / or hospital
- Plans, implements and evaluates in service talks and training courses / activities based on infection control policies
- Ensures patient care delivery follows established standards of care and infection control policies
- Applies understanding of prevention of medico-legal issues in relation to patient care
- Assist to prepare reports on infections and other related statistics required by AH, Medical Affairs (Quality Assurance) and / or MOH, and other departments upon requests
Secondary Responsibilities:
- Acts as a resource person t- nursing, medical, paramedics and administrative staff on issues relating to outbreaks and infection control issues. Reports to relevant hospital / medical administrators when required
- Updates and maintains relevant infection control statistics
- Participates / leads in quality improvement / research projects
- Participates / leads in unit-based infection control team
- Follows up with accidental sharps / mucus membrane exposures to blood and body fluids
- Informs and notifies wards and relevant staff / or government authority of patients with communicable disease
- Assists in arranging prompt isolation of infected patients in co-operation with nursing managers / nursing staff
- Participates / conducts orientation programs for nursing staff and students
- Assumes additional responsibilities or tasks as assigned by the Nurse Clinician, Deputy/Assistant Director (Nursing) and Chief Nurse

Requirements
- Registered Nurse with at least 7 years of post-registration clinical experience, of which 2 years must be as Senior Staff Nurse I
- Diploma in Nursing with relevant post-basic advanced certification and Degree in Nursing from recognized training institution as approved by Singapore Nursing Board, and certification / prior working experience for a year in infection control.
- Technically skilled, competent and able to work independently
- Good interpersonal and communication skills
- Computer literacy skills –MS Word, MS Excel and PowerPoint

If the role sounds interesting to you, please contact ‘[email protected]’ to understand more on the role. Please indicate the position that you are interested in the subject heading.

Responsibilities and Duties:

•     Attending to and resolving resident’s feedback and / or complaints, arranging for site inspections

•     Assign supervisor to attend joint inspection on reported defects

•     Generate work schedule for Subcontractor to rectify defects

•     Liaise with project stakeholders (Subcontractors, HDB, Town Council, Consultants)

•     Draft and reply to feedback/queries, message residents, proper documentation/ recordings of defects including hardcopy/ on-line submissions

•     Maintain and upkeep of Building Service Centre

•     Administrative duties such as proper recording and filing of documents as per ISO standards

•     Any other duties as assigned by superior

Qualifications:

•     Minimum pass in at least 5 subjects, including English, at GCE “O” Level or Nitec Certificate

•     Prior customer relations work experience is preferred.

•     CRO shall be capable of communicating effectively in English and one other Singapore official language and have a pleasant personality.

•     Possess Singapore WSQ Certificate in Service Excellence (Level 1) would be an advantage.

•     Customer oriented with good communication and interpersonal skills.

•     CRO shall be competent and possess the skill, knowledge and ability to manage the public relations with residents effectively.

• Possess a Diploma/Degree in Engineering or Building Science with at least 3 years knowledge in QM/CONQUAS requirements.
• Implement and monitoring QA/QC System.
• Produce Non-Conformance Reports.
• Track and monitor subcontractors’ quality and performance.
• Guide subcontractors to achieve Quality and CONQUAS requirements.
• Assist CONQUAS Manager in day to day quality control and assurance, in structures, M&E and architectural works.
• Maintain up-to-date test and inspections with RE/RTO’s.

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit/replacement recommendations to clients

5. On-the-job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement/process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of faults/breakdowns and rectification according to authorities/clients' requirements.

9. Perform full set of testing complying with authorities/clients' requirements.

10. Perform maintenance programs and comply to authorities/clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

* Able to lead team of workers and supervisor;

* Accountable for the profitability at designated site;

* Must have good management skill;

* Process good communication skills;

* preferably to possess driving licence;

* Knowledge of Auto-CAD for drafting purpose;

* Multi skill knowledge of various construction services;

* Attend to site meetings when required;

* Monitor site schedule to ensure that progress at site is in line;

* Hold facilitator meeting for different site supervisors;

* Ensure that strict safety at site in conformance to MOM regulations;

* Attend site show round when dedicated to do so.

Job description

• Review project specification and technical clarification

• Interface and Coordination among Mechanical and Electrical parts and SWCs.

• Attend interface meetings for technical clarification for Electrical Work

• Coordinate with Civil, Archi and track works for site progress

• Review for CSD (combined services Drawing) and SEM (Service Electrical Mechanical)

• Check electrical design discrepancies and prepare relevant documents for clarification

• Coordinate with design, Construction, T&C and operation teams

• Coordinate with Subcontractors for Product submission and Method Statement submission to LTA

• Interface and Coordinate with contracts team for VO progress.

• Coordinate with subcontractor to ensure timely completion of project. (Design, Construction, Delivery, FAT, SAT, T&C, handover for SWCs)

• Coordinate with suppliers on delivery of all equipment.

• Coordinate for Delivery, FAT, SAT with Subcontractors

• Update for C190 E&M Progress report to LTA (Including Recovery Program)

• Attend the weekly, monthly meeting and relevant party meeting with LTA

• Attend T & C, handing over facility to clients including training.

• Prepare and submit the Monthly Report and

• Monitor progress and tracking progress report

• Technical Support to all GS engineers.

Job Requirements:

Degree from university in the field of Electrical engineering

Min. 5 years working experience

MS Office, CAD, BIM

Other information:

Work at Tuas

To Apply

Please submit your resume in Microsoft Word and indicate the below information:

Current Salary & Expected Salary

Availability to Commence Work

Type of Projects handled.

• Well Established Company
• Basic $3500 - $4500 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Serangoon
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues from production and IQA
• Handle nonconforming material and follow up with supplier for corrective actions
• Lead new supplier assessment and annual audit for existing suppliers
• Monitor and review supplier quality performance annually
• Monthly engage and review with suppliers’ quality performance and drive for continuous improvement
• Issue and follow up on the supplier Corrective Action Request (SCAR) to supplier, review SCAR effectiveness for timely closure and track SCAR log monthly
• Assist QA Manager on internal quality activities
• Liaise with internal production on internal process issues
• Implement the quality assurance plan, mainly on incoming, in process and outgoing inspections
• Any other duties as assigned by superior

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area
• Minimum 2-3 years of working experiences in QMS and ISO 9001 audit, preferably in manufacturing industries

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

OFFICE / ADMINISTRATIVE CLERK

MONDAY TO FRIDAY

0900AM TO 0600PM

ABLE TO PREPARE INVOICES, QUOTATIONS AND ALL OFFICE DOCUMENTS

SUPPORTING OPERATIONS WORK.

MUST HAVE COMPUTER SKILLS , I.E MICROSOFT OFFICE, EXCEL, WORD AND POWER POINT.

MAKING PHONE CALLS AND EMAIL TO CUSTOMERS.

UNDERSTAND ACCOUNTING WORK

EXPERIENCE ABOUT 10 YEARS.

SINGAPOREAN OR PR.

About Certis

We are a leading security services organisation. We put technology to work in making the world a safer place. Our mission is that as trusted partners, we protect lives and assets, and deliver integrated critical services. By empowering our people, our goal is to enable our communities to stay safe and thrive.

We offer a broad range of opportunities and career pathways for our people to grow and explore their potential. We believe that people, equipped with innovative thinking and technological capabilities will make our world safer, smarter and better.

Life at Certis

If you are a passionate individual looking for opportunities to expand your skills, and purposeful work instead of just a ‘job’, we would love to hear from you.

At Certis, no two days look alike. Our work calendars are filled with chances to collaborate with others, and bring new initiatives to life. Whether you’re looking to improve a process, or have an innovative idea awaiting a technology solution, we want you to bring your ideas to the table.

We are a close-knit team that looks out for each other, works hard to get the job done, and encourages each other to grow – the perfect place for you to grow your career!

Roles & Responsibilities

Training & Development:

• Conduct training sessions for security personnel, covering topics such as security protocols, emergency response, customer service, and use of security equipment.
• Monitor and evaluate the effectiveness of training sessions, adjusting as necessary.
• Provide feedback and coaching to security personnel to enhance their performance.

Quality Assurance:

• Establish and maintain quality assurance processes to assess the current processes.
• Conduct regular audits and inspections to ensure compliance with security protocols and procedures.
• Identify areas for improvement and implement corrective actions.
• Conduct red-teaming exercises daily based on recent trends.

Documentation and Reporting:

• Maintain accurate records of all administrative, IT-related matters and all red teaming records.
• Maintaining reports on training effectiveness, compliance, and quality assurance findings.
• Communicate findings and recommendations to senior management.

Continuous Improvement:

• Stay updated on industry trends, emerging security technologies, and regulatory changes.
• Proactively identify opportunities for process improvements and training enhancements.
• Lead initiatives to enhance the overall quality and efficiency of department operations.

Skills & Requirements

• Diploma from recognized Institutions and possess relevant work experience
• Possess strong leadership qualities, good temperament and maturity
• Effective communication and instructional skills
• Resourceful, dedicated, self-motivated and results-oriented person, with the ability to work independently
• Proficiency in the usage of Excel and Word will be beneficial
• Good service mindset
• Awareness of different digital systems and tools in the field of security operations and training
• Able to perform shift work

Recognition & Award

What you can expect from us:

• Work on world-class security projects renowned for their safety, reliability and efficiency
• Commitment to your ongoing development, including on-the-job opportunities, formal programs and assistance with further education
• Community volunteering opportunities
• A competitive remuneration package, featuring performance-based incentives and a medical insurance and dental allowance.

Certis is committed to fostering an inclusive and diverse workforce culture, which is supported by our values. Our aim is to attract, develop and retain a truly diverse and high-performing workforce.

The Qualifications:

• A diploma in Mechanical & Electrical or equivalent qualification.
• Mechanical & Electrical Coordination certificate from BCA
• A relevant Advanced Certificate / Higher NITEC / Advanced NBQ with 2 to 3 years of relevant work experience.
• A relevant certificate with 4 to 5 years of relevant work experience.
• NITEC / Higher NBQ with at least 5 years of relevant work experience12.

Duties and Responsibilities:

1. Assist the Project Manager to plan, monitor and control daily works at the project sites, able to read and drawing M&E drawing by using AutoCAD.

2. Implement all policies, activities, procedures, instructions as relevant and required by the QESH management system.

3. Comply with client and applicable legal and other requirements.

4. Implement plan actions from risks and opportunities assessment.

5. Take responsibility for prevention of work-related injury and ill health.

6. Ensure that project operations and document control procedures are adhered to.

7. Plan, coordinate and monitor M&E subcontractor’s activities at project sites.

8. Maintain good house-keeping and implement safety practices.

9. Ensure that all M&E works carried out are in accordance to the drawings, specifications, construction plan, procedures, work instructions, etc.

10. Ensure that inspection and tests are carried out as per Inspection and Test Plans, quality control mechanisms are being used and results are conformed to specifications.

11. Submit sample materials and calibration certificates to consultants for approval.

12. Undertake any and all other duties and responsibilities as so instructed by the superior.

13. Accountable for the quality, safety, health and environmental management and performance at the project site.

The skills required for an M&E Coordinator position:

• Analytical skills: The ability to analyze data and information to identify patterns, trends, and insights.
• Communication skills: The ability to communicate effectively with stakeholders, including project staff, partners, and donors.
• Project management skills: The ability to manage projects, including planning, implementation, monitoring, and evaluation.
• Research skills: The ability to conduct research, including designing research studies, collecting and analyzing data, and presenting findings.
• Technical skills: The ability to use software and tools for data collection, analysis, and reporting.

• Assist the Project Manager or Project Engineer in the daily execution of work

• To supervise the work of sub-contractors and in-house workers

• To work closely with other site operations staff to meet the project schedule

• Ensure installation is carried out as per construction drawings

• Ensure that manpower is effectively deployed to deliver the materials timely

• To monitor the progress and quality of work being performed by workers

• Ensure that works are executed within an acceptable standard of workmanship

• Responsible for attendance to daily site coordination meeting with sub-contractors

• Attend the daily tool box meeting and convey clear instruction accordingly

• Understand and ensure compliance in project requirement and scope of work

• Identify, rectification and handling over of defects after completion.