• Report to Precast yard Manager
• Responsible for All Precast segments casting work
• Responsible Precast Mould Assembly
• Profiling of Precast Segment Rebar and Post Tensioning Duct
• Preparation of Pre and Post Tensioning Calculation
• Ensure the quality of work as per the approved standard
• Assure that work is done according to safety work practices
• Post Tensioning Duct Layout and Profile works
• Coordinate with site Engineer and supervisor
• Assist with Senior Engineer and attend internal meetings

Job Requirements:

• Degree in Civil Engineering or equivalent
• At least 2 years of experience in civil engineering projects, inclusive of relevant experience in precast yard or fabrication yard
• Experienced in the fabrication of segmental box girder for viaduct, precast mould assembly & repair, and/or similar projects is preferred
• Knowledgeable on the applicable standards for the casting works
• Location :Woodlands
• Project : Viaducts

Set goals for performance and deadlines in ways that comply with company’s plans and

vision and communicate them to subordinates

· Organize workflow and ensure that employees understand their duties or delegated tasks

· Monitor employee productivity and provide constructive feedback and coaching

· Receive complaints and resolve problems

· Maintain timekeeping and personnel records

· Pass on information from upper management to employees and vice versa

1) Plan, manage and coordinate adhoc project/renovation works and routine building minor works

2) Prepare quotation via Schedule of Rates for any repairs or new works

3) Attend to Fault calls for urgent works

4) Attend to any meetings as arranged by superior

5) Any other works assigned by superior

Requirement

1) Nitec / Diploma in Building and Construction Related

2) Candidate with no Qualification but with relevant experience may be considered

3) Fresh graduates are welcome to apply

• Carry out maintenance, diagnosis, and repair of electrical, automation, and instrumentation of equipment applied by industrial motor controls, chemical feed systems, pump drives, and the Supervisory Control and Data Acquisition (SCADA) system
• Perform maintenance, repair, and upgrade of the Water Supply Division’s electrical distribution infrastructure
• Carry out thermography of electrical distribution panels and motor control
• Troubleshoot problems by gathering and analyzing power quality data
• Ensure longer life of obsolete equipment and save funds by carrying out detailed troubleshooting down to component levels
• Perform maintenance, installation, repair, and troubleshooting of control centers, de-energized higher voltage equipment, and 480 volt motors
• Repair and maintain engine generators and carry out work on related control circuit equipment
• Carry out maintenance, repair, and installation of building circuits and similar equipment
• Perform maintenance of alarm and SCADA systems, electrical pneumatic and electronic controls, programmable controls, and other similar equipment
• Carry out necessary carpentry, welding, valve repair, cement, and pipe fitting work
• Prepare reports, maintain records, and requisition supplies and parts
• Inspect and supervise work done by external vendors.

Assist the project manager, lead the team to complete the project manager's work objectives and progress. Assist Bar Bending Schedule (BBS) and receive the rebar sent to the site. Record the necessary data.
Core Responsibilities 1. Attend daily toolbox meeting and workers briefing at 7:30 a.m.
2. Assist BBS to receive reinforcement materials sent to the site

3. Familiar with architectural drawings and structural drawings

4. Communicate and implement project manager's objectives to ensure work progress, quality and safety meet customer requirements.

5. Teach and personally demonstrate how to erect stirrups, install and bind rebar.

6. Check the size, quantity and spacing of steel bars. Ensure the quality of completed rebars meets the requirements of consultant's Specification and PE Design Requirements.
7. Following RE or RTO on site to carry out the inspection and rectification the defect, then hand over to the concrete supervisor for concrete casting.

8. Achieve efficiency targets set by the company and site Project Manager.

9. Report daily progress, quality, safety and efficiency to the project manager before the end of work.

Job Specifications 1. Passed the test of steel bar skills of BCA. Qualified BCSS certificate.
2. Able to read/understand/execute work based on construction drawings, Basic drawing recognition skills, able to read the material list and drawings of BBS.
3. Good communication, interpersonal and collaboration skills
4. Minimum 2 years of relevant experience.

• 3 years experience in drafting

• Have basic knowledge of architecture and hardscape

• To produce shop drawing and as built using AutoCAD

• Review project specs, technical and detail drawing.

• Coordinate with Architects, Engineers and other Contractors on any issue and approval.

• Able to work in team or independent

- Have painting work experience (1-2 years)

- Able to understand and speak moderate english

- Able to work various place

- Have painting work experience (1-2 years)

- Able to understand and speak moderate english

- Able to work in team

1) Plan, manage, inspect, compile service reports for Routine Maintenance for M&E Systems

2) Prepare quotation via Schedule of Rates for any repairs or new works

3) Attend to Fault calls for emergency/critical M&E systems

4) Attend to any meetings as arranged by superior

5) Any other works assigned by superior

6) Provide Support in project works

Requirement

1) Nitec / Diploma in Mechanical

2) Candidate with no Qualification but with relevant experience may be considered

3) Fresh graduates are welcome to apply

1) Plan, manage, inspect, compile service reports for Routine Maintenance for M&E Systems

2) Prepare quotation via Schedule of Rates for any repairs or new works

3) Attend to Fault calls for emergency/critical M&E systems

4) Attend to any meetings as arranged by superior

5) Any other works assigned by superior

6) Provide Support in project works

Requirement

1) Nitec / Diploma in Electrical

2) Candidate with no Qualification but with relevant experience may be considered

3) Fresh graduates are welcome to apply

HIS DUTY TO SUPERVISOR PROJECT AND MANAGE TO GUIDE WORKERS TO COMPLETE THE JOB WITH SAFETY AND REPORT ON PROGRESS TO MANAGER

· To assist the Project Manager in the daily execution of work including manpower deployment, materials on-site and work schedules.

· Liaise with consultants, sub-contractors on day-to-day operations and technical issues.

· Responsible for all trades of works on-site, including structural, architectural, building, M&E, etc.

· Ensure good quality of work and manage defect rectifications.

· Ensure work is done in compliance with design, specifications, safety requirements, and related local statutory regulations.

· Check and supervise direct labor/workers including their attendance.

· To monitor materials on-site to ensure that the appropriate material is available to meet the construction program.

· Assist in the organizing and sequencing of work.

· Delegate the works and control the projects within the budget and schedule.

• Reports to Resident Surveyor
• Responsible for surveying works during the full phases of a construction, ensuring measurements and calculations conducted at survey sites are accurate
• Levelling, traversing, setting-out, data collecting, topography, settlement monitoring, etc.
• Perform land surveying / measurements using variety of specialist technical equipment
• Perform levelling and traversing to transfer TBM and reference line
• Coordinate and planning daily site survey works
• Prepare the setting out drawing for construction purpose
• Report daily survey works to Project Resident Surveyor
• Liaise with engineer/sub con on technical issues

Job Requirements:

• Diploma/Degree in Land Surveying or Geo-spatial information and technology or equivalent
• Minimum of 3 years relevant experiences as Surveyor, preferably with LTA infrastructure projects
• Well- versed in using total station
• Candidate should have technical expertise and knowledge in Civil Engineering Construction especially in foundation, structural, ERSS and viaduct
• Must be proficient in Microsoft Excel and Auto CAD
• Candidates with CSCPM/BCSS/Confined space/Work At Height certificates would be an advantage
• Competent to generate technical computation independently
• Good interpersonal skills
• Location : Woodlands
• Project : Viaducts

• Assist and support in managing restaurant financial objectives by forecasting requirements, scheduling expenditures through best monitoring methods via tracking, monitoring and analyzing Sales, Labour & Food cost variances
• Participate in planning weekly schedule planning and daily team floor plan.
• Trains and provide on-going communication to staff and deliver first-class service to customers
• Propose staff changes in assigned areas, including hiring, promotion, demotion and vacation leave
• Maintain safety requirements in the restaurant.
• Handles customers' feedback promptly.
• To comply ad-hoc with all the admin and paperwork requirements.
• To maintain high level of knowledge of wines, knowledge in pairing of wines to food and to be able to upsell to guests.
• To be able to work independently and manage smooth operations and troubleshoot problem areas effectively.

• Assist and support in managing restaurant financial objectives by forecasting requirements, scheduling expenditures through best monitoring methods via tracking, monitoring and analyzing Sales, Labour & Food cost variances
• Participate in planning weekly schedule planning and daily team floor plan.
• Trains and provide on-going communication to staff and deliver first-class service to customers
• Propose staff changes in assigned areas, including hiring, promotion, demotion and vacation leave
• Maintain safety requirements in the restaurant.
• Handles customers' feedback promptly.
• To comply ad-hoc with all the admin and paperwork requirements.
• To maintain high level of knowledge of wines, knowledge in pairing of wines to food and to be able to upsell to guests.
• To be able to work independently and manage smooth operations and troubleshoot problem areas effectively.

• Reports to Construction Manager
• Prepare & support calculation for site material, equipment, and machinery requisitions
• Prepare detailed method statements and relevant documents
• Coordinate between client, sub-contractor(vendors), suppliers and internal team
• Generate and handle company reports, meetings, and documents required
• Review engineering calculations, specifications, and drawings submitted by subcontractors/vendors
• Ensure the activities comply with the quality, environment, health & safety requirements

Job requirements:

• Bachelor’s Degree in Civil engineering or equivalent
• Minimum 2 years of relevant Civil Engineering projects experience, preferably in the construction & supervision of vehicular structures and road
• Proficient in Microsoft Office is mandatory while knowledge of Auto CAD will be helpful
• Attained CSCPM/BCSS, Work At Height, confined space certification
• Good interpersonal skills
• Hardworking and willing to learn
• Project : Viaducts
• Location : Woodlands

• In charge of tendering and site measurement
• Request quotations from sub-contractors and suppliers including negotiation with them
• Prepare sub-contractor contracts
• In charge of contract requirements
• Prepare project billings and report monthly
• Prepare Variation Orders
• Preparing take-off quantity
• Preparing material submission as well as other necessary documents

• Reports to Construction Manager
• Prepare detailed schedule and monitor work progress closely to ensure on-time completion
• Prepare detailed method statements and relevant documents
• Coordinate between client, consultant, and sub-contractor(vendors)
• Attend the meeting with the stakeholders
• Generate and handle company reports, meetings, and documents required
• Propose alternative work methods or other ways to increase productivity
• Handle technical and engineering issues
• Ensure the activities comply with the quality, environment, health & safety requirements

Job requirements:

• Bachelor’s Degree in Civil engineering or equivalent
• Minimum 3 years’ experience as a Civil Engineer involving sewer works
• Technical expertise and knowledge in Civil Engineering Construction especially sewer works
• Proficient in Microsoft Office and Auto CAD
• Attained CSCPM/BCSS/Confined space/Work At Height certification
• Hardworking and willing to learn
• Good interpersonal skills

Responsibilities & Duties

• Attend and assist to customer queries, maintain good customer service and serve customers politely.
• Putting on a smile with positive thinking. Greet customers with a welcome.
• Work as a team to hit monthly sales targets.
• Assist with replenishing, packing and sorting of stocks.
• Planning work schedule.
• Ensure smooth operations for Sales department
• Promote product to customers
• Handle customer questions, complaints, and issues
• Coordinate the delivery of goods
• Deal with customer refunds
• Keep up to date with company’s promotions
• Planning roster
• Provide Staff training

Handling physical goods receiving, issue, packing, dispatching and fulfill delivery schedules, conduct physical stock check, maintain high standard of cleaniness. Provide support on duties relating to logistics and inventory management.

• Command and control operations in the production line.
• Ensure that the daily targets / KPIs are met.
• Ensure that parts manufactured were in line with planner's need.
• Improve operational processess to enhance efficiency / productivity so as to meet standard cycle time.
• Eliminate unnecessary scrap.
• Maintain all machines to run at their fullest capabilities and reduce down time.
• Drive for continuous improvement in the line.

• Reports to Construction Manager
• Preparation of detailed schedule and monitoring the progress closely to ensure on-time completion
• Preparation of detailed method statements and relevant documents
• Coordination between client, consultant, sub-contractor(vendors) and internal team
• Generate and handle company reports, meetings, and documents required
• Propose alternative work method or other way to properly address the issues related to RC works
• Review engineering calculations, specifications, and drawings submitted by subcontractors/vendors
• Ensure the activities comply with the quality, environment, health & safety requirements

Job requirements:

• Bachelor’s Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant Civil Engineering Experience
• At least 2 years’ experience in the construction & supervision of Vehicular structures and road projects preferably with LTA infrastructure projects
• Candidate is required to have technical expertise and knowledge in Civil Engineering Construction specifically on RC works and construction for pile cap, piers/columns construction, crosshead, viaduct, etc.
• Candidate with experience in viaduct construction & knowledge of LTA RC work requirements is an added advantage.
• Proficient in Microsoft Office is mandatory while knowledge of Auto CAD will be helpful
• Attained CSCPM/BCSS, Confined space, Work At Height certification
• Good interpersonal skill
• Hardworking and willing to learn
• Project : Viaducts
• Location : Woodlands

Job Duties & Responsibility:-

• Manage tender projects and on-going projects
• To prepare contract documents, taking off measurement, providing cost estimates and tender submissions
• To prepare project cash flow forecast
• Monitor project budget and costing
• Submission of main contract progress claims and variation orders
• Liaise with Consultants and developers on progress payments and VO matters
• Procurement including preparation of tender documents, call quotations and evaluate tender submissions
• Interview and negotiate with sub-contractors and suppliers, and make recommendations of award
• To prepare contract documents to sub-contractors and suppliers
• Evaluation and certification of suppliers/sub-contractors progress payments
• Evaluates and verifies sub-contractors variation orders
• Settlement of final accounts

Requirements:-

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• Required language(s): English (Able to liaise with English and Chinese speaking associates is preferred)
• At least 3 Year(s) of working experience in the related field is required for this position.
• At least 3 Year(s) of working experience in 2D and 3D drawing, BIM modeling, AUTOCAD
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Able to work independently
• Details and meticulous
• Preferable for candidates who can start work immediately
• Singaporean are welcome to apply.
• 5.5days during probation, alternate Saturday off upon confirmation of employment.
• Working Hours : Mon-Fri 9-6pm/ Sat 9-1pm

In the ever-evolving digital landscape, major corporations face significant challenges in meeting the diverse business needs across their vast operations. Element is seeking a highly skilled and detail-oriented Business Analyst to join our LIMS team. As a Business Analyst, your role becomes crucial in navigating these challenges and bridging the gap between business requirements, specific lab requirements and digital solutions. In our organization, with its complex and diverse business needs, you will play a pivotal role in establishing requirements for a Laboratory Information Management System (LIMS) program. By capturing and categorizing ongoing business requests, you will help create and drive the successful implementation of a robust LIMS program, enabling efficient data management and streamlined processes across our corporation. This is an exciting opportunity to contribute to our digital transformation journey and shape the future of our organization.

This position will be remote, yet international travel to various offices may be required as needed.

Job Duties:

• Collaborate with stakeholders to capture and understand business requirements for the LIMS program
• Establish a systematic approach to categorize and prioritize business requests, ensuring effective management and alignment with program objectives
• Conduct in-depth analysis of business processes, workflows, and data requirements to identify areas for improvement and optimization
• Translate business requirements into clear and comprehensive technical specifications for LIMS implementation and customization
• Collaborate with IT teams and vendors to ensure that the LIMS program meets the defined business needs and regulatory requirements
• Facilitate meetings and workshops to elicit requirements, gather feedback, and address concerns from stakeholders
• Conduct gap analysis to identify areas where existing systems or processes fall short of meeting business requirements
• Develop and maintain detailed documentation, including functional requirements, use cases, and test scenarios
• Collaborate with quality assurance teams to define and execute testing strategies, ensuring that the LIMS program meets quality standards
• Provide support to end-users, enabling them to effectively utilize the LIMS program
• Stay on par with industry trends, suppliers and best practices in LIMS implementation, continuously seeking opportunities for program optimization

Job Requirements:

• Strong understanding of Laboratory Information Management Systems (LIMS) and laboratory workflows
• Excellent analytical and problem-solving skills, with the ability to dissect complex processes and translate them into technical requirements
• A talent for translating complex sets of processes and requirements into clear baseline assessments
• Proficient in requirements gathering techniques, such as workshops, interviews, and document analysis
• Strong written and verbal communication skills, with the ability to effectively convey technical concepts to both technical and non-technical stakeholders
• A knack for categorizing and prioritizing business requests, ensuring efficient management and alignment with program objectives
• Ability (or strong willingness to perfect) to analyse and reflect data in a BI tool, by using dynamic charts and datasets
• Familiarity with quality assurance and testing methodologies in the context of laboratory information
• Exceptional attention to detail, ensuring accuracy and completeness in documenting business requirements and technical specifications

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

• Conduct training for CoreTrade and SEC(K) courses.
• Maintain safe and clean training environment (Classrooms, training/test bays, workshop, office and store).
• Maintain functionality and control stock for training equipment, devices, utilities, materials and etc.
• Maintain high CoreTrade test passing rate of 90%.
• Maintain proper training/test documentation for auditing.
• Carry out adhoc work and complete tasks given by the Training Manager

Requirements:

1. At least 4 years of working experience in Constuction industry
2. Possess a SEC(K) cert by BCA
3. Possess a ACTA Cert