Perform arboricultural and horticultural maintenance works. Duties include but not limited to: -

• Watering, weeding and basic pruning.

• Soil aeration and clearing of horticultural waste.

• Co-ordinate and take instruction from clients and/or foreman and supervisor at site.

• Participate in training and/or assessments.

• Adhere to the control measures stated in Risk Assessments (RA).

• Report to their immediate supervisors any incident, accident, near miss or dangerous occurrence.

• Observe and follow safety regulations.

• Follow safety instructions given.

Any other related duties assigned by the Management.

Job Summary:

Attached to a project as a key member of the design team; will be responsible for the proper and timely execution in accordance with the control estimate and specific requirements of the project. Also responsible for ensuring that the Global policies, are followed and manage the activities as assigned by Group Lead/DM.

Main Duties:

· Preparation, checking of electrical design deliverables like SDL, schematic, specification, data sheet, calculation, layouts, reports, etc.

· Site survey to design and specify modification scope on existing system, perform adequacy check etc. for brown field projects.

· Inter discipline design interface and coordination.

· Participate in the Client meeting.

· Maintaining Hold List/Comments Log/Assumption List.

· RFI response, support assignment during construction

· Client relationship management

· Ensure implementation of Quality Management policy in place.

Requirements:

· Minimum 10 years of working experience in Pharmaceutical/Chemical/FMCG with Engineering consultancy.

· Software Skills: ETAP/SKM, AutoCAD, Revit, Dialux/AGI32, Navis work, & general Microsoft Office skills.

· Experience in Electric design skills for Single line diagrams, preparation of technical specifications of various high & low side electrical equipment like Substation, Transformer, Switch yards, Motor/Power control centers

· Experience in Sizing and calculation for Earthing, Illumination, Cables (HV/LV), DG sets, UPS, power factor correction.

· Experience in Sizing of cable trays, bus ducts, Risk assessment of lightening protection of building and structures. Lighting and power design for clean room system

· Experience in Design of ELV system (fire alarm, PA, CCTV, ACS, Voice and data)

· Ability to participate in client meetings, review 3D models using Navis work, guide designer to carry forward design.

· Good knowledge of International Codes and Standards such as IEC, IEEE, BS, ANSI, IP, NEC and IS

· Advanced knowledge of Singapore local code, standards and regulatory

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 3 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

About us

At Design Bridge and Partners we believe design is the most powerful means of driving positive change. Whatever the business. Whatever the challenge. Because design answers the big questions. Reshaping how organizations behave and how people experience the world. So we’re redefining what design is and what design can do for brands, businesses, people and planet. We are a revolutionary design partnership.

We see design as the thread that unifies brand across strategy, identity, experience, and guardianship. With 850 people in 12 countries, our clients include NASA Artemis, Unilever, Coca-Cola, Microsoft, Diageo, Mastercard, Intel, Mondelez, Tencent, HSBC, Colgate, Reckitt, Fortnum & Mason and the BBC.

About the Role

We’re on the hunt for an amazing Client Director to join us in our inspiring studio in Singapore. We are looking for someone with current or relevant brand design experience, plenty of business development, client relationship building and project management experience within the creative industry, someone who has a genuine passion for brands and great attention to detail.

About you

The ideal person for this role should be super organised and resourceful, proactive in seeking out new business opportunities, a motivating team leader, and the ability to work collaboratively with colleagues and clients. If this sounds like the perfect opportunity for you, send us your CV (in English, please) and we'll take it from there.

Why us?

World-famous brands. National icons. Technology unicorns. Plucky upstarts no one’s yet heard of. You’ll get to work on all of these, with a team of brilliant, optimistic people right by your side and scattered all across the world.

We’re passionate about our people and their careers. We’ll help you to develop your skills and provide you with outstanding benefits. So, you’ll have a chance to make your mark on our future, as we make a mark on yours.

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 3 years of ASIC design.
• experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 8 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterpart

• Designing of refrigeration, heating, ventilation and air-conditioning (RHVAC) system, site project survey, inspection and cost estimation, preparation of materials listing, drawings, installation, testing and commissioning.
• Closely work and liaise with the Commercial & Sales Department and the Operation Department on projects that require the involvement of both these departments.
• Preparation of quotations for RHVAC projects.
• Provide technical support to the field works that include but not limited to the air-conditioning, ventilation, heating, electrical and automation system, mechanical and general:-

A) Technical survey and inspection, survey report writing, materials listing, equipment selection, quantification and identification.

B) Technical support to field work coordination.

• Heat load calculation and air duct system design.
• Project coordination between worksite, office, clients and suppliers.
• Any other duties assigned by the Management as and when necessary.

Requirements

• Tertiary education in engineering discipline
• At least 2 years’ working experience in RHVAC systems preferrably in marine industry
• Has in-depth knowledge of refrigeration cycle theory, line components, circuit flushing, refrigerant recovery, pressure testing and vacuuming
• Good written and verbal communication and coaching skills

We are located at 11A Tech Park Crescent Singapore 637842 (Tuas South).

Brief Description

· Leading multiple projects for Process design work based on standard company procedure/other procedures. Timely completion of process design and process engineering deliverables.

· Adherence to Dept./Discipline Working Instructions and Quality Systems.

· Should have strong communication skills.

· Overview of work progress and work-hour usage.

· Working within allocated budgets.

· Meet client expectations and maintain long-term relationship with client.

· Able to deliver projects with multi office execution.

Minimum Job Requirements

A degree in Chemical Engineering Discipline with Minimum 10 years in Process Department of a consultancy organization. Candidate should possess knowledge in carrying out basic and detailed engineering work. Candidate should have experience of working for pharma projects. Candidate should have knowledge of following:

· Preparing Process Flow Diagrams (PFDs) and Piping and Instrument Diagrams (P&IDs).

· Candidate should be able to carry out hydraulic calculations.

· Candidate should be well versed with safety valve device sizing in line with API-520/521 or client approved standards.

· Candidate should be capable of generating equipment data sheets, IPDS and working on packages in close coordination with interdiscipline engineers.

· Candidate should be able to perform process calculations like heat & mass balance, utility summary and equipment sizing.

· Candidates should be able to carry out Capacity Mapping for Pharmaceutical Projects such Bio tech, OSD and API.

· Exposure of simulation software’s such as HYSYS, ASPEN, HTRI.

· Should possess knowledge of Area classification and man material flow concepts.

· Should be well aware of regulatory requirements of USFDA, MHRA and WHO etc.

· Should possess knowledge on equipment selection.

· Should be able to participate in PHA, HAZOP sessions and close PHA recommendations.

· Should be able to support Sales and Project Managers for any new prospectus and proposals.

· Should be able to guide young process engineers.

Measurement and Performance

Through regular contact with discipline and project personnel and by regular review of the project status reports, ensure up to-date and reliable statistical information on project performance.

Improve the productivity by means of reduction of rework and errors.

Responsibilities

Review technical requirements of client’s specifications and ensure that agreement is reached on the basis of design. Participate in discussions with the client, as necessary.

Monitor that work and progress are in compliance with the project requirements and schedule.

Maintain contact with other disciplines/groups to ensure:

- Project Manager and/or Engineer are aware of problems of progress delays.

- Proper interchange of information.

- Proper interchange of documents

- Interface is correctly defined.

Our Client is a Spots Manufacturing MNC. Due to their current expansion plan, they are looking for a Senior Hardware Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West, easily accessible.

Responsibilities:

• Responsible for Designing, Documenting and Developing Optimized Hardware.
• Testing, bug fixing, improving hardware performance, create schematic PCB Library using PCB Layout and Schematic Capture skills.
• Developing of Robotics and Sensor modules
• Assisting on product issues, product production and product in-service.
• Any ad-hoc duty as given.

Requirements:

• Degree in Electrical or Electronics Engineering
• Min 6 years of experience in Hardware Design, Validation, & Optimization.
• Proven Experience in High-Speed Digital board design with experience in interfacing bus standards (DDR3/4/ LVDS/MIPI/PCIe etc.)
• Analog Circuit design & Simulation.
• Experience in developing complex CPU and microcontroller-based systems.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 2 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Responsibilities:

• Collaborate with consultants to align design drawings with regulatory requirements.
• Create technical submissions for materials, construction methods, and structural shop drawings
• Address construction issues on drawings and maintain close communication with Architectural, M&E teams, and regulatory authorities.
• Evaluate and propose solutions for technical challenges, while planning, monitoring, and reporting the progress of shop drawing production
• Oversee a team of BIM Modelers responsible for generating coordinated shop drawings and Concrete Body Plans.

Requirements:

• Min Degree in Civil Engineering or it's equivalent
• At least one year related working experience
• Professional Engineer registered with the Professional Engineers Board, Singapore is an added advantage
• Have familiarity with British and Singapore Design Standards.

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to send in your resume.

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Roles & Responsibilities:

The Associate Engineer is responsible for producing design drawings, recommending solutions, and collaborating closely with the Sales and Production departments to meet customer requirements.

Job Responsibilities:

• Design, constructing, and testing various technological products.
• Establishing and documenting design rules for everyday use.
• Conducting design tasks using AutoCAD & Inventor.
• Collecting information about clients’ requirements & collaborating with Managers to create products through sophisticated computer software.
• Providing field support, including customers visits, when necessary, to offer technical service, troubleshoot issues, and gather relevant information.
• Accessing and offering feedback on proposed changes to engineering standards and policies, which may include ASME Y14.5-2009 STD for GD&T (Geometric Dimensioning & Tolerancing).
• Undertaking ad hoc duties as assign by the manager.

Job Qualifications and Requirements:

• Diploma/degree in Engineering: Minimum 5 years’ experience in precision engineering with hands-on machining process and Minimum 5 years with AutoCAD & Inventor experience.
• A self-starter person with strong focus and with a passion on highly result-driven.
• A commitment to maintaining quality mind-set in all aspects of work.
• The ability to manage multi projects within tight deadlines and effectively multitask under pressure.
• Excellent verbal and written communication skills.
• Proficiency in mathematics.
• The ability to handle both simple tasks and more complex assignments.
• A minimum of 5 years of experience in the semiconductor industry or related field.

Our client is a Global MNC, one of the leading players in the Oil & Gas sector. Due to business needs, they are now recruiting a Project Engineer to be part of their team for ongoing transformation projects. They are located in the West – easily accessible.

Responsibilities:

• Responsible for overseeing the different functions of project execution for the company from start to end (eg. Awarding of contract, delivery of goods etc.)
• Responsible for the company’s project management, allocating resources to the different areas when required, and resolving any issues present during the project phase
• Responsible for overseeing the various scope of order, and monitoring the various applicable project specifications
• Responsible for attending to the various technical and commercial reviews, resolving any enquiries from both internal/external stakeholders
• In charge of handling/monitoring the various projects’ schedule development, and maintaining the required project documentations (eg. purchasing, shipping and invoicing etc.)
• In charge of resolving the customers’ complaints, overseeing any order deviation from the various customers
• All other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Chemical Engineering, Mechanical Engineering or other relevant field of studies
• Minimum 2 years of relevant working experience in project management
• Experienced and Knowledgeable in process plant design and management

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

EA License No: 19C9682

EA Personnel No: R22104689 (Lim Yu Xun, Acer)

Responsibilities

• To work as supporting Mechanical Design Engineer to Project Lead Mechanical Design Engineer
• Prepare Purchase Requisitions / Specifications / Mechanical Data Sheet / Technical Bid Evaluation for Centrifugal Pumps, PD Pumps, Air Compressors.
• Prepare Purchase Requisitions / Specifications / Mechanical Data Sheet / Technical Bid Evaluation for Steam Boiler, Hot Oil Heaters, Heat Exchangers, Refrigeration Units, Oil / water separator, Cooling Tower, Vapor Recovery Unit, Marine Loading Arm, Gangway, Jib Crane, Flare, Truck Loading Arm
• Prepare Purchase Requisitions / Specifications / Mechanical Data Sheet / Technical Bid Evaluation for Pressure Vessels, Fire Fighting Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 8 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Descriptions

• To prepare tender bids for submission on time.
• To take charge of contract review, to assure proper tenders are prepared and submitted.
• Documenting any changes in design and updating budgets.
• Prepare notification for extension of time from any potential project delay.
• Review and understand all drawings and specifications.
• Monitor project costs to ensure objectives of the project are achieved in accordance with building contract law; Ensure compliance with standards.
• Responsible for coordination with contractors, suppliers, and other parties.
• Handle pre or post-tender procurement which includes sourcing and negotiating with suppliers and trade contractors.
• Tabulate and evaluate price comparison and costing summary.
• Handle project administration and documentation, including preparation of sub-contract, Variation Orders, etc.
• Prepare cost analysis and cost reduction strategies to enhance overall project value.
• Prepare and submit progress claims to clients and update progress claim reports monthly.
• Assist and perform all tasks assigned by a respective superior.

Job Requirements

• At least 3 years of commercial interior fit-out experience.
• Resourceful, and sensitive to numerical.
• Experience in participating in full interior fit-out projects.
• Excellent time management skills.
• Work well under tight submission deadlines.
• High sense of responsibility and integrity.

Bonus marks if you are...

• Able to within a short notice period is preferred.
• High sense of responsibility.
• Proven experience in strong cost analysis, cost control, and cost planning.

Why join us?

• Career progression and development opportunities.
• Flexible working environment.
• A diverse and inclusive workplace.
• Employees' welfare such as medical and wellness claims, company events, and team building.

The Sales Consultant will be responsible for maintaining relationships with new and existing clients. The applicant must be organized and work well under pressure. A good telephone communication is essential. You will need to be ambitious and hardworking, and interested in a challenge

Responsibilities:

• Ability to develop new business, manage existing clients and write proposals
• Communication and organizational skills essential, with the ability to prioritize tasks
• Ability to interact with in house tech staff, relaying specific requirements for designated projects
• Ability to focus on the services of Verz Design and find business in the areas such as: Web Design / e-Commerce/ Search Engine Marketing / Search Engine Optimization
• Ability to work independently
• Proactively provide ideas and solutions towards the improvement of client sites

Qualifications:

• Able to work in a fast pace and multi-task environment
• Proficient in Ms Office Applications such as Word, Excel and PowerPoint
• Holder of at least a Diploma or higher in Marketing, Business, or Infocomm related
• Fresh Grads are welcome to apply
• Must have passion in sales and good in interpersonal skills
• Confident, enthusiastic and cheerful personality
• Proactive, responsible, organized, able to work independently, and attention to detail
• Must possess knowledge and provide value added suggestions whenever discussing projects with clients
• Candidate with web technical knowledge is a plus.

This role presents an opportunity for anyone looking to extend his experience in the internet industry and to grow together with our company. Fresh Grads are most welcome to apply. Remuneration package shall be determined based on experience and qualifications. Only shortlisted candidates will be notified. Thank you for applying.

Responsibilities

• Produce Basic Auto Cad/Sketch Up/BIM drawings
• Assist Project Manager in tendering, understand the tender specification requirement.
• Draft quotation for project
• Prepare cost estimation, revise and update tendering
• Coordinate with project team to measure and value the work done/products used on site for claim submission
• Draft report for project submission
• Liaise with the client and other construction professionals, such as site managers, project managers and site engineers when necessary

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 5 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Key Responsibilities:

• Working on ASIC digital design, including RTL coding based on Verilog, simulation, RTL and gate-level verification, code coverage, testbench development, logic synthesis, and design documentation.

Key Requirements:

• Master/Degree in Electrical Engineering with 5 years of ASIC design experience preferred.
• Familiar with ASIC design flow.
• Experience in RTL coding based on Verilog. Familiar with the digital simulation debugging environment.
• Familiar with UNIX/Linux environment and scripting.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Strong analytical and problem solving.

Key Responsibilities:

• The design verification engineer is expected to check, test, and gate the product design for both performance and reliability.
• Draft a test plan to cover each feature in product spec, certification requirement, and customer application.
• Support on DFMEA documentation draft and maintenance.
• Test products' electrical & mechanical performance and reliability with lab equipment such as multi-meter, integrating sphere, oscilloscope, and environmental chamber.
• Testing equipment management & maintenance.
• Follow up on the quality issues found and verify the effectiveness of corrective action.
• Give quality input during the early design stage to avoid potential quality issues.
• Update & deliver the test reports to the project lead and define the quality level of R&D stages.
• Work with QA to ensure the design quality can be delivered to the next phase.

Requirements:

• Bachelor’s in Electronic Engineering, computer science, or relevant majors.
• At least 5 years of design, testing, or quality experience.
• Experience in power electronics product testing and understanding of electronic product schematics is required.
• Operation experience with basic electronic equipment like oscilloscope, multimeter, power supply, and load are required.
• Knowledge or experience in electronic design, design quality, MCU, FW testing & appliances is preferred.
• Able to travel overseas.
• Familiar with UL standards will be an added advantage.
• Proficient in English and chinese to liase with HQ counterparts.

Key Responsibilities:

• Conduct research and develop microgrid power management and energy management algorithms.
• Deploy power and energy management applications on microgrid controllers.
• Develop AI/ML/DL solution platforms for various energy management applications.
• Design SLD, sizing, and integration of microgrid DERs, protection circuits, and loads.
• Prepare test cases and conduct microgrid functional, error tests both SIL and on testbeds.
• Emulate microgrids using tools such as Power Factory, Matlab, or Panda Power and integrate with microgrid controller to carry out preliminary SIL tests.

Requirements:

• Bachelor, master’s degree, or Ph.D. in Power Systems, Electrical Engineering or equivalent, with minimum 8 years of experience.
• Experienced in scripting Python, Matlab or equivalent.
• Knowledge of operational principles of microgrids such as on-grid optimization, off-grid optimization, islanding, resynching, and blackstart operations
• AI, ML, DL related experiences in domains such as energy management, predictive analysis, forecasting, and anomaly detection is an added advantage,

Job Description

· Able to do space planning and furnish detail drawings.

· Prepare material boards, coordinate design documentations and material selection.

· Able to help in upkeep of materials library.

· Ensure drawings are according to scale and specified requirements and translate it to comprehensive shop drawing to be sent to factory for production.

· Actively collaborate with Operations Team to ensure all site marking dimensions are correct and captured for accurate ordering of products.

· Able to edit / colour-correct product images for marketing tools such as website and brochure.

· Team player and can communicate well.

Requirements

· Recognized Degree/Diploma in Interior Design / Graphic Arts or equivalent qualification.

· Proficient in 3-D studio MAX, AutoCAD, Photoshop, Illustrator and other design related software.

· Minimum 1-2 years related experience in commercial design works.