Must have Class 3 license

Work location: North

Duration: 1 yr (Extendable)

Salary: Up to $2900 + Standby allowance

Working hours: 8.30 am to 5.30 pm. This role will be required to be on standby at times and the frequency may varies.

Job Scope:

• Survey and provide advice towards vehicle concern

• Troubleshooting on site and site recovery if possible

• Submission of report upon case recovery

• To support on testing of equipment and diagnosis

• Setup test environment as and when required

• To perform installation on actual vehicle when required

Job Requirements:

• Min. Nitec/ Diploma in any relevant engineering field

• Min. 1 yr relevant experience in electrical/ mechanical engineering

For interested applicants, please send your updated resume to: [email protected]

All candidates’ information will be treated with the strictest confidence

Melissa Zhang Zhiqi (Mezzo)

R2197564

Recruit Express Pte Ltd

99C4599

Process Engineer

Responsibilities may include but are not limited to:

· Support Manufacturing group with day-to-day troubleshooting and maintenance activities, identification of process improvement and optimization opportunities, review of SOPs and MBRs.

· Responsible for small to large-sized capital projects throughout all phases of the project lifecycle, including the development of user requirement specifications, process design, equipment and instrumentation specification/selection, equipment procurement, installation, commissioning, qualification, and turn-over to manufacturing.

· Project management aspects including project schedule, budget, and coordination of multi-disciplinary teams.

· Support Chemical Development and Manufacturing Services groups with activities such as technical transfer and scale-up of processes into manufacturing.

· Support EHS activities including PHA, PSSR, and PSM compliance.

· Support Validation activities including review of Factory Acceptance Test and Site Acceptance Test (FAT/SAT) protocols and participating in FAT/SAT execution, review of installation, operational, and performance qualification (IQ/OQ/PQ) protocols, participating in IOPQ execution, participation in Clean-in-Place (CIP) cycle development and equipment characterization, and review of final reports.

· Support Quality Assurance activities including writing, review, and/or resolution of Change Controls (CC/CSC), Corrective and Preventive Actions (CAPAs), and audit responses.

· Perform job functions and responsibilities independently and with limited direction.

Our requirements:

• Min Degree in Biomedical Sciences or related sciences
• Min of 2- 5 years’ experience in Process Engineer
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: Process Engineer)

Thank You.

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Job Scope

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.

Requirement

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science
• Demonstrated ability to lead people or processes
• Laboratory experience required (testing, data reviewing, or other supporting activities for laboratory operation)
• Basic functional and technical knowledge of the discipline
• Good organization skills and attention to detail
• Ability to document clearly and concisely

For interested applicants:

Please send your resume to [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

The suitable candidate will join a team of engineers and operations specialists in the support of enterprise privileged access management infrastructure and operations. He/She will be responsible for the end to end design, deployment, operations and development of the bank’s privileged access management framework, infrastructure and processes.

Key responsibilities

Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.

Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.

Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.

Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.

Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.

Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.

Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.

Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.

Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.

Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

Your role

Requirements gathering and documentation

• Engages with stakeholders to gather, understand, and document their business needs.
• Translates business and customer needs into detailed user stories and defines clear acceptance criteria including functional and non-functional needs.
• Maintains clear and comprehensive documentation that is easily understood by both business and technical teams.
• Ensures that user stories are understood by the development team and are actionable.

Requirements Analysis

• Analyzes and prioritizes requirements, ensuring they align with business objectives and are feasible within technical constraints.
• Identifies conflicts, dependencies, and impacts on existing systems or processes.

Requirements Validation and Verification

• Ensures that requirements are complete, consistent, and verifiable.
• Works with stakeholders to validate that the documented requirements meet the business’s needs.

Collaboration with Development Teams

• Works closely with the development team to ensure technical challenges are addressed and decisions are made with long-term scalability in mind.
• Engages in daily stand-ups, sprint planning, and retrospectives to guide the team toward successful product delivery.
• Provides timely feedback on product increments and acts as the decision-maker for backlog priorities.

Stakeholder Management

• Balances stakeholder interests and manages expectations regarding timelines, features, and technical limitations.
• Communicates technical progress, challenges, and trade-offs to non-technical stakeholders in a way they can understand.

Technical Debt and Quality

• Prioritizes technical debt alongside feature development to ensure long-term system health and performance.
• Ensures that the product is built to meet not only functional requirements but also high standards of technical quality.

Your team

You'll be working in the Touchpoints area team in Singapore.

Your expertise

• Analytical and Critical Thinking
• Effective Communication
• Technical and Domain Knowledge
• Interpersonal and Negotiation Skills
• Detail-Oriented and Organized
• Modeling and Diagramming Proficiency
• Continuous Learning and Adaptability

Responsibilities

• Support the site projects on Qualification/ Validation
• Responsible to review and approve the Quality Control related (Analytical Instrument Qualification, Analytical and Microbiology Method Validation, Critical Reagent Qualification) protocols, reports, procedures and other related documents to ensure compliance to internal procedures and regulatory requirements.
• Evaluate and approve discrepancy related to qualification/validation protocols in order to guarantee documentation of the incidents and identification of corrective actions.
• Support collaboration and participations in projects as Quality Representative for Quality Systems and Validation.
• Provide validation expertise, oversight and support for the development (or modification phases) of Analytical Instrument Qualification, Analytical and Microbiology Method Validation, Critical Reagent Qualification.
• Ensuring the information contained in approved qualification/validation document(s) is understandable and defendable during inspection.
• Provide quality oversight on the Quality Control validation maintenance activities and Master Validation Plan.
• Support in multisite initiatives to ensure harmonization of Quality Systems and qualification/validation related activities between the plants.
• Build strong partnership with all other departments to ensure open communications and acceptance
• Responsibility to adhere to any applicable EHS requirements.
• Commitment to a fair and respectful relationship to others and behavior in accordance with Shire’s Code of Conduct.
• Any other duties as assigned by Manager/ Supervisor.

Education and Experience Requirements

• The candidate should have at least have a degree in pharmaceutical sciences, life sciences, biology, biotechnology chemistry, chemical engineering, engineering or a related discipline. Additional certification and trainings such as Certified Quality Engineer or specific Validation topics will be advantages.
• A minimum experience of 2-3 years in the pharmaceutical or biotechnology in quality assurance, manufacturing operations or validation, ideally in a multinational company. Hands-on experience with hands-on experience in performing equipment, process, cleaning, computer systems & shipping validation will be advantages.
• FDA/EU cGMP validation requirements/expectations (eg. CFR 21 part 11, PAT) and a thorough understanding of ICH guidelines and the various validation guides such as PDA Technical guides, ISPE GAMP guides etc.
• Able to logically solve problems in order to find timely solutions.
• An ability to interact and communicate with all types of personalities in an effective and diplomatic manner.

Apply now by sending your resume to: [email protected]

We regret to inform that only shortlisted candidates will be notified.

Ashley Loo Yan Ni | R2095115 | EA License Number: 99C4599

Recruit Express Pte Ltd Company Reg. No. 199601303W

At Aleph, we design human experiences by asking the right questions. Here, you’d find a curious breed of creative engineers spread across the globe, specializing in craft, strategy, and technology. With a keen ear to the ground, we turn big dreams into user-first digital solutions by design. Through rigorous prototyping, close collaboration, and responsive engineering, we commit to creating a future that leaves our craft, community, and clients better than before we began.

At Aleph, we design total experiences by asking the right questions. Here, you’d find a curious breed of Creative Engineers spread across the globe, specialising in craft, strategy, and technology. With a keen ear to the ground, we turn big dreams into user-first digital solutions by design. Through rigorous prototyping, close collaboration, and responsive engineering, we commit to creating a future that leaves our craft, community, and clients better than before we began.

Key Responsibilities

Research and Strategy

• Utilize frameworks and tools to discover and ideate strategic models to address complex challenges.
• Demonstrate expertise in UX tools such as customer journeys, persona archetypes, service blueprints, and testing methodologies.

Design Fundamentals and Tools

• Apply design functions to produce unique design elements (e.g. Typography, Colours, Iconography, Retouching).
• Incorporate innovative technologies in strategy development, while demonstrating familiarity with industry tools such as Figma, Adobe Suite, and Midjourney.

Presentation and Storytelling

• Present and communicate complex strategic concepts to varied audiences, facilitating stakeholder alignment and buy-in.
• Inspire, present, and communicate ideas through compelling storytelling and writing to underscore design decisions.

Task Prioritisation and Planning

• Lead and manage intricate strategic projects, driving them from inception to successful conclusion.
• Use advanced project planning and management tools to ensure efficient execution and delivery of strategic initiatives.

Creative Direction and Execution

• Apply design functions to produce unique design elements (e.g., Typography, Colours, Iconography, Retouching).
• Collaborate with project managers/scrum coaches to devise a design plan and deliverables, demonstrating understanding of SCRUM.

Resilience and Growth

• Understand the influence of solid strategy on user experience, particularly in tech and AI contexts.
• Embrace constructive feedback, exhibiting resilience and a consistent desire to evolve your strategic acumen.

Prerequisites

Learning and Development

• Collaborate with both management and working teams to enhance our reputation, business, and people through Project Leadership, Design Leadership, and Business Growth.
• Work with the Growth Team and fellow leads on business development efforts, crafting approaches, writing proposals, and presenting to prospective clients.

Passion and Interest

• Work closely with business teams to identify opportunities in the market and ongoing projects.
• Reframe insights and briefs into actionable outcomes to create unique propositions, solutions, and strategy.

Communication and Time Management

• Drive the Creative Engineering culture, safeguarding quality of projects and deliveries from a creative standpoint.
• Mentor and ensure the welfare of the team, continuously evaluating productivity and identifying initiatives within the company.

Benefits

• Competitive salary (compensation will be based on experience)
• Medical insurance
• Yearly reward based on performance
• Casual work environment and attire
• A solid team behind you: great people who love what they do
• A fun culture which promotes learning and knowledge sharing
• Opportunities for personal and professional growth offerings from our in-house Learning @ Aleph Academy, Flocket meetups, timely training for skills upgrade, workshops and conferences.

About the Job:

The Supply Chain Process Engineer leads the implementation of best-in-class Logistics and Warehousing capabilities for Singapore market, to transform the local supply chain for better agility, ultimate luxury service, cost and cash efficiencies and sustainability, leveraging digitalization and automation. The role spans across internal three divisions – Beauty, Fashion and Watches & Fine Jewelry. You will work closely with various departments such as retail operations, technology, information systems, sustainability as well as global and regional supply chain experts to implement the best solutions to market, while ensuring upskilling of existing organization. The process engineer plays a critical role to transform the supply chain and bring a competitive advantage to Chanel.

What impact you can create at Chanel

Lead discussions for all topics related to warehousing and transportation transformation, while proposing to the Head of Supply Chain final process improvements and decisions to be made:

1. Warehouse & Transportation Management:

• Order Management: Establish strategies and implement plans to move to a touchless order management flow – from order acquisition to order processing and to order release to warehousing operations for pick and pack
• Warehouse operations: Define strategies to implement best-in-class operations for the warehousing team, looking at opportunities to implement automation solutions in the areas of receiving, stock counting, picking, packing and/or shipping. And be the project leader for implementation of the strategies, in a way that lead times to customers are reduced and team’s productivity is increased.
• Inventory management: Upgrade inventory management processes to cover all domain of inventories – selling items, visual merchandizing items and all non-selling stocks. Lead the alignment with the business teams on what success looks like and define and implement new governance process to make breakthrough improvement in inventory holdings. Implement inventory forecasting and warehouse capacity planning to improve business plans and business continuity. In driving alignment with business teams, Head of Supply Chain should be consulted and will need to sign off on final process. This role will need to propose options for the business teams and Head of Supply Chain to consider.
• Transportation management: Redesign transportation management with better work integration with transportation companies and better efficiency for the team.

2. Digital Transformation

• Streamline work processes: Lead the transformation to a fully digital organization, with objectives to streamline work processes and complete elimination of low added-value tasks with improved lead time, better compliance to global policies and better productivity. This includes deployment of new IT solutions and/or development of no/low code solution for the team
• Digital Twin: upon completion of foundation layer of digitalization, lead the implementation of a warehousing and transportation digital twin, creating a virtual model of the existing operation and enabling advanced analytics, scenario planning and cost and inventory optimizations

3. Others

• Continuously keep abreast of and advise management regarding changes or latest trends in warehouse and transportation management practices
• Any other related ad-hoc projects: global or regional supply chain project, e.g related to sustainability improvement, operating system change, data & analytics requirements for supply chain team

You are energised by

• Leading and collaborating with diverse teams at all levels of organization.
• Being agile, flexible and able to deal with ambiguity.
• Curiosity, positivity and championing strong work ethics
• Leading courageously and able to challenge the status quo to implement bold changes
• Influencing critical topics and facilitating meaningful conversations in a non-hierarchal way.
• Working in a highly collaborative and matrixed environment.
• Thriving to deliver in a fast-paced environment

What you will bring

• Minimum 5 years’ experience in driving breakthrough in supply chain management, such as warehousing, logistics or supply chain transformation.
• Qualifications in Supply Chain Management or related engineering field. Additional qualifications/certificates in Project Management and/or digital tools are preferred.
• Critical thinking, problem solving and analytical skills
• Excellent digital skills – M365, Power BI or other BI Tools, RPA and no/low code solutions.

What Chanel can offer you

• Brand Legacy: In-depth exposure into the brand and cultural evolution of the House of Chanel.
• Talent Development: Chanel is committed to developing and empowering our people.
• Collaborative Culture: Be part of a collaborative and inclusive culture, where diverse perspectives are valued, and partnerships are fostered across functions and regions.
• Support and Resources: You will have access to the resources, support and infrastructure needed to continue to grow successfully.

At Chanel, we are focused on creating an inclusive culture that nurtures personal growth, contributing to collective progress. We believe the uniqueness of each individual increases the diversity, complementarity and effectiveness of our teams. We strongly encourage your application, as we value the perspective, experience and potential you could bring to Chanel.

Job Description:

MAINTENANCE & ENGINEERING

• Plan and carry out preventive maintenance throughout the hotel to ensure standards are maintained for guest comfort.
• Prioritise and carry out maintenance as requested by Departments on a daily basis to ensure the smooth running of all hotel departments.
• Motivate and develop the Engineering team to reach to their fullest potential.
• Ensure guest-centric approach to works, schedules with priority placed on services which impact guest satisfaction.
• Liaise and work closely with the MCST and FCC to ensure smoother operations and consistency in approach.
• Record meter readings and liaise with the Executive Assistant Manager regarding options to improve energy management and conservation.
• As a Fire Safety Manager, be responsible for the testing of fire alarms, emergency lighting etc. on a routine basis as required by local Council and Fire Service.
• Liaise with the Body Corporate with regards to maintenance issues and re-charge labour and materials at agreed rates
• Ensure compliance with all legislation, including Health and Safety and Environmental.
• Liaise with the Executive Assistant Manager regarding use of contractors within the Hotel, controlling expenditure and ensuring work is to the standard required by the Company and manufacture specifications.
• Ensure the cost effective and hygienic removal of rubbish from the hotel areas and monitor to ensure areas are clear and free of offensive odour.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by local Council, Government and Manufacturer specifications.
• Liaise closely with all departments regarding ‘down’ rooms to expedite a quick turn around and return to inventory.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Research, recommend and liaise with the Executive Assistant Manager regarding procedures to improve the overall efficiency of the department and to carry out project work/prepare reports as requested by the Executive Assistant Manager.
• Support the co-ordination of safety and security/risk management programs via third party providers
• Work with the operational Department Heads team to ensure InterREACT tracking and compliance
• Ensure health, safety and welfare of all ambassadors is provided for through implementation of integrated occupational safety and health program.
• Give guidance to the effective operation of the WHS Committee.
• Ensure all ambassadors are competent in the safe and effective use of equipment and chemicals in accordance with the manufacturer’s instructions.
• Attend and actively participate in daily meetings respecting the confidentiality of issues which may be discussed formally or informally.
• Prepare monthly Engineering reports, commenting on key performance indicators and action taken to keep on target.
• Adherence to Emergency Communication procedures ensuring that enquiries from the media are only responded to by the nominated spokesperson.
• Strive to implement the AccorHotels Vision and demonstrate active use of AccorHotels Values.
• Any other reasonable request within your range of competence as required by Management.

Job Title: Senior Desktop Engineer (Leading 2 - 3 members)

We are hiring under Recruit Express headcount, and you will be deployed to:

Location: CBP

Pay: $4500- $5000

Duration: 1-year contract Renewable

Working Hours: Normal Office Hours

As a Senior Desktop Engineer, you will play a critical role in overseeing and maintaining the desktop computing environment within the organization. You will be responsible for providing advanced technical support, designing, and implementing desktop solutions, and leading projects to improve system performance and user experience. Additionally, you will mentor junior engineers and collaborate with other IT teams to ensure seamless integration and operation of desktop services.

Technical Leadership:

• Provide advanced technical support and troubleshooting expertise for complex hardware, software, and network issues.
• Design, implement, and maintain desktop infrastructure solutions including operating systems, applications, and configurations.
• Lead desktop-related projects such as system upgrades, migrations, and deployments.

System Architecture and Design:

• Design and implement desktop management solutions such as imaging, deployment tools, and software packaging frameworks.
• Develop and maintain desktop security policies, configurations, and access controls.
• Evaluate new technologies and solutions to enhance desktop performance, security, and user productivity.

Team Collaboration and Mentoring:

• Collaborate with IT teams including network, security, and systems administrators to ensure integrated and optimized desktop services.
• Mentor junior desktop engineers, providing guidance, training, and knowledge sharing opportunities.
• Participate in hiring processes and performance evaluations for desktop engineering team members.

Documentation and Compliance:

• Maintain comprehensive documentation of desktop configurations, procedures, and best practices.
• Ensure compliance with regulatory requirements, security standards, and licensing agreements related to desktop environments.
• Conduct audits and assessments to identify and mitigate risks related to desktop systems and data.

Continuous Improvement and Innovation:

• Identify opportunities for automation, process improvements, and cost optimizations in desktop management and support.
• Stay current with industry trends, emerging technologies, and best practices to recommend and implement innovative solutions.
• Collaborate with vendors and third-party providers to evaluate and implement new technologies or services.

Essentials:

• Minimum 3 years of relevant working experience.
• Extensive experience in desktop engineering, system administration, or related IT roles.
• Proficiency in desktop operating systems (Windows, macOS) and enterprise management tools (SCCM, Intune, Jamf, etc.).
• Strong knowledge of virtualization technologies (VMware, Hyper-V) and desktop deployment methodologies (MDT, WDS, etc.).
• Experience with scripting languages (PowerShell, Bash, Python) for automation and task scripting.

Desired:

• Excellent problem-solving skills, analytical thinking, and attention to detail.
• Leadership abilities including project management, team collaboration, and mentoring.

Education/ Professional Qualifications Requirements:

• Diploma / Bachelor’s degree in computer science, Information Technology, or related field (or equivalent work experience).
• Relevant certifications such as Microsoft Certified: Modern Desktop Administrator Associate, VMware Certified Professional (VCP), or similar are highly desirable.

Interested applicants, please Email,

Fabian Ling Tuong Liing

Email Address: [email protected]

Outsourcing Team

Recruit Express Pte Ltd

EA Licence No: 99C4599

We regret that only shortlisted candidates will be contacted.

Responsibilities

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures
• Develop, maintain, and troubleshoot the process control system recipe/Models
• Investigate, report and troubleshoot findings on both quality and EHS-related issues observed during manufacturing or batch record review
• Develop, implement, and monitor robust preventive measures for processing issues
• Play a proactive role in ensuring the site safety and quality standards are adhered to
• Proactively monitor, identify develop, and implement improvements in processes and equipment
• Communicate regularly to the plant personnel on process updates
• Train the process technicians on the process and procedures as required.
• Ensure adherence to approved procedures and update the procedures as required, including the principles and practices of good data management (ALCOA) Focus on Safety and GMP Compliance as operations | priorities and as performance measures
• Accountable for Good Data Management and Date integrity understanding and performance
• Report and investigate actions or behaviors that may negatively impact the desired outcome of the GMP process or activity
• Own on or more multiple equipment/GMP ayotema in production and present the system overview with evidence compliance to internal and external auditors.
• Develop courses of action and drive the implementation of solutions
• Play an active and impactful role to deliver flawless execution for respective PCTs (eg APL, MS, 00, Leadership, Engineering) by updating performance against metrics, highlighting & resolving issues with appropriate escalations Work with the PCT to identify and drive improvement as per continuous improvement (Cl) goals of the PCT.
• Uphold code of conduct and values
• The senior position is expected to perform a coaching role to junior engineers and manage more complex manufacturing and operation issues. He/she is also expected to lead working teams managing projects to support manufacturing processes. Collaborate with cross-functional teams to drive flawless execution.
• Internal Stakeholders includes:
• Operation-for supporting the operation team to meet production targets in cycle time and output
• Supply Chain-for ensuring availability of raw materials for production and supply of finished products to the market, for qualification of alternate sources of material/consumables Quality for production batch release, and production investigation/improvement
• Engineering for equipment readiness and production investigation/improvement
• EHS-for performing safety review of changes in the manufacturing processes and safety related investigation
• Technical Services for product chemistry, process design understanding production investigation improvement and product transfer
• External Stakeholders Equipment Vendors and raw material suppliers-for new materials/equipment/consumables sourcing and during process investigation/improvement

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!

Interested candidates, please submit your resume to [email protected]

Alison Chen

Outsourcing Team

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

The Job:

• Network security management
• Web security management
• End point security management
• Messaging security management
• Security & vulnerability management
• Automation of management tasks

What You’ll Need:

• Degree/Diploma in Computer-related disciplines
• At least 5 years of experience that covers management of enterprise security solution

Interested applicants can send their detailed resumes to [email protected]or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

Location: Kranji (Near MRT, 5-minute shuttle bus)
Contract Duration: 6 months (with potential extension)

Key Responsibilities:

• Revise and review Standard Operating Procedures (SOPs)
• Review executed Master Batch Records (MBR) and Electronic Batch Records (EBR)
• Provide quality support and interpretation to the manufacturing team on quality-related queries and issues
• Participate in GEMBA and GMP walks for quality oversight
• Archive Quality Operations (QO) documents and support IQ/OQ activities
• Contribute to User Requirement Specifications (URS) and design specifications

Primary Job Objectives:

• Support the implementation and maintenance of quality systems
• Provide quality oversight for validation-related activities, including data integrity
• Ensure compliance with internal procedures and regulatory requirements, including FDA/EU cGMP and ICH guidelines

Requirements:

• Minimum of 2-3 years of experience in pharmaceutical/biotechnology quality assurance, manufacturing, or validation (preferably in multinational companies)
• A degree in pharmaceutical sciences, life sciences, biotechnology, chemistry, chemical engineering, or related fields. Certification in Quality Engineering or Validation topics is a plus
• Hands-on experience with equipment, process, cleaning, computer systems & shipping validation is advantageous
• Knowledge of FDA/EU cGMP, CFR 21 Part 11, and ICH guidelines is essential
• Strong problem-solving skills and ability to interact effectively with cross-functional teams
• Excellent verbal and written communication skills

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Responsibilities

• Develop Manufacturing/Operating Instructions and necessary Standard Operating Procedures
• Develop, maintain, and troubleshoot the process control system recipe/Models
• Investigate, report and troubleshoot findings on both quality and EHS-related issues observed during manufacturing or batch record review
• Develop, implement, and monitor robust preventive measures for processing issues
• Play a proactive role in ensuring the site safety and quality standards are adhered to
• Proactively monitor, identify develop, and implement improvements in processes and equipment
• Communicate regularly to the plant personnel on process updates
• Train the process technicians on the process and procedures as required.
• Ensure adherence to approved procedures and update the procedures as required, including the principles and practices of good data management (ALCOA) Focus on Safety and GMP Compliance as operations | priorities and as performance measures
• Accountable for Good Data Management and Date integrity understanding and performance
• Report and investigate actions or behaviors that may negatively impact the desired outcome of the GMP process or activity
• Own on or more multiple equipment/GMP ayotema in production and present the system overview with evidence compliance to internal and external auditors.
• Develop courses of action and drive the implementation of solutions
• Play an active and impactful role to deliver flawless execution for respective PCTs (eg APL, MS, 00, Leadership, Engineering) by updating performance against metrics, highlighting & resolving issues with appropriate escalations Work with the PCT to identify and drive improvement as per continuous improvement (Cl) goals of the PCT.
• Uphold code of conduct and values
• The senior position is expected to perform a coaching role to junior engineers and manage more complex manufacturing and operation issues. He/she is also expected to lead working teams managing projects to support manufacturing processes. Collaborate with cross-functional teams to drive flawless execution.
• Internal Stakeholders includes:
• Operation-for supporting the operation team to meet production targets in cycle time and output
• Supply Chain-for ensuring availability of raw materials for production and supply of finished products to the market, for qualification of alternate sources of material/consumables Quality for production batch release, and production investigation/improvement
• Engineering for equipment readiness and production investigation/improvement
• EHS-for performing safety review of changes in the manufacturing processes and safety related investigation
• Technical Services for product chemistry, process design understanding production investigation improvement and product transfer
• External Stakeholders Equipment Vendors and raw material suppliers-for new materials/equipment/consumables sourcing and during process investigation/improvement

TELE me at @yijingggggg or WA me at https://wa.me/+6598623556 NOW!

Interested candidates, please submit your resume to [email protected]

Alison Chen

Outsourcing Team

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Salary: Up to $6K (+ 1.5 months completion bonus)

Duration: 1 Year

Location: Tuas (Islandwide pickup)

Working Hours: 5 day office hours

Key Responsibilities:

• Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
• Develop, maintain and troubleshoot the process control system recipe / models.
• Carry out technical assessment for evaluation of processes.
• Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
• Develop, implement and monitor robust preventive measures for processing issues.
• Play a pro-active role in ensuring the site safety and quality standards are adhered to.
• Proactively monitor, identify, develop and implement improvements in processes

Requirements:

• Minimum Degree in Chemical Engineering / Science with major in Chemistry

Experience in Pharmaceutical/Chemical Plant

Knowledge of GMP

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job Title: Java Application Support Engineer

We are hiring under Recruit Express headcount, and you will be deployed to:

Location: CBD

Pay: $4500- $5000

Duration: 1-year contract

Working Hours: Hybrid

Job Summary: The Application Support Engineer will be responsible for providing high-quality technical support for our software applications. This role requires a strong understanding of Java development, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams.

Key Responsibilities:

Application Support:

• Provide second and third-level support for Java-based applications.
• Diagnose and resolve technical issues in a timely and efficient manner.
• Monitor application performance and ensure system availability and reliability.
• Tools usage and scripting would be added advantage.

Troubleshooting:

• Analyze, identify, and resolve complex software issues.
• Debug and troubleshoot Java code to fix defects and performance issues.
• Utilize logs, monitoring tools, and other diagnostic methods to identify root causes.

Collaboration:

• Work closely with development teams to understand application functionalities and dependencies.
• Collaborate with cross-functional teams, including QA, DevOps, and Product Management, to resolve issues and improve applications.
• Communicate effectively with customers and stakeholders to provide updates and resolutions.
  

Development and Maintenance:

• Participate in the development and deployment of application updates and enhancements.
• Write and maintain documentation for application support processes and procedures.
• Contribute to continuous improvement initiatives to enhance application support and performance.
  

Incident and Problem Management:

• Manage and prioritize incident tickets and service requests.
• Escalate critical issues to appropriate teams and ensure timely resolution.
• Conduct root cause analysis and provide recommendations for preventing future incidents.
  

Qualifications:

• Education:

Bachelor’s degree in computer science, Information Technology, or a related field.

• Experience:

Minimum of 5 years of experience in Java development and application support.

• Technical Skills:

1. Proficiency in Java and Java EE technologies.
2. Understanding of web technologies (HTML, CSS, JavaScript) and frameworks (Spring, Hibernate).
3. Experience with databases (SQL, Oracle, MySQL) and writing complex queries.
4. Familiarity with version control systems (Git, SVN).
5. Knowledge of application servers (Tomcat, JBoss, WebLogic) would be advantage.
6. Experience with monitoring tools and logging frameworks.
   

• Soft Skills:

1. Excellent problem-solving and analytical skills.
2. Strong communication and interpersonal skills.
3. Ability to work independently and as part of a team.
4. Strong organizational skills and the ability to manage multiple priorities.
   

Interested applicants, please Email,

Fabian Ling Tuong Liing

Email Address: [email protected]

Outsourcing Team

Recruit Express Pte Ltd

EA Licence No: 99C4599

We regret that only shortlisted candidates will be contacted.

Major Responsibilities:

• Responsible for setting up / establishing the Electronic Batch Records
• Responsible for manufacturing process technical support and improvement initiatives for ongoing operations
• Support start-up and assist in plant equipment and facility validation and qualification activities
• Supports manufacturing activities during the technology transfer, qualification and validation batches associated with new product introductions to the site
• Supports operational efficiency goals for yield, product quality and other product and/or site KPI’s
• Contact and consultant for process/equipment troubleshooting and investigation activities
• Supports risk assessment activities providing relevant technical knowledge
• Provides support for process cleaning/changeover strategies
• Authors technical reports, batch records, SOP’s, investigations, protocols as required and ensures consistency and quality of the group’s documentation

Education/Experience:

• Min Degree in Chemical Engineering
• 5 years of experience (preferably), in the area of API Manufacturing (Technical Engineer) or Manufacturing, Science and Technology (MSAT)

Interested candidates please send a copy of your resume in MS Word to

[email protected]

EA Personnel: Alvin Lee Peck Keong

CEI No.: R1104781

Recruit Express Pte Ltd, EA License No.: 99C4599

Transport Pick Up: Jurong East, Boon Lay, CCK, Woodlands, Tampines, Sengkang, Bishan, Paya Lebar, Yishun

1. Develop Manufacturing / Operating Instructions and necessary Standard Operating Procedures.
2. Develop, maintain and troubleshoot the process control system recipe / models.
3. Carry out technical assessment for evaluation of processes
4. Investigate, report and troubleshoot findings on both quality and EHS related issues observed during manufacturing or during batch record review.
5. Develop, implement and monitor robust preventive measures for processing issues.
6. Play a pro-active role in ensure the site safety and quality standards are adhered to.
7. Proactively monitor, identify, develop and implement improvements in processes and equipment.
8. Communicate on a regular basis to the plant personnel on process updates.
9. Train the process techincians and fellow process engineers on the process and procedures as required.
10. Own one or more multiple equipment / GMP systems in production and present the system overview with evidence compliance to internal and external auditors.

Qualification

• Min. degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry
• Preferably, 2 – 3 years experience in a relevant manufacturing environment (pharmaceutical and new product introduction).

TELE me at @jacechooo or WA me at https://wa.me/+6582976283 NOW!
Interested candidates please submit your resume to [email protected]

Jace Choo Oi Kei
Personnel EA License No.: R1875164
Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.

Support in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.

Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready

Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.

Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)

Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.

Email: [email protected]

Whatsapp: 96503173

Telegram: @jesswongie

Jessie Wong Yuan Si

Personnel EA License No.: R2197171

Recruit Express Pte Ltd (EA Licence No.: 99C4599)

Job Title: Java Application Support Engineer

We are hiring under Recruit Express headcount, and you will be deployed to:

Location: CBD

Pay: $4500- $5000

Duration: 1-year contract

Working Hours: Hybrid

Job Summary: The Application Support Engineer will be responsible for providing high-quality technical support for our software applications. This role requires a strong understanding of Java development, excellent problem-solving skills, and the ability to work collaboratively with cross-functional teams.

Key Responsibilities:

1. Application Support:Provide second and third-level support for Java-based applications.
   Diagnose and resolve technical issues in a timely and efficient manner.
   Monitor application performance and ensure system availability and reliability. Tools usage and scripting would be added advantage.
   
2. Troubleshooting:Analyze, identify, and resolve complex software issues.
   Debug and troubleshoot Java code to fix defects and performance issues.
   Utilize logs, monitoring tools, and other diagnostic methods to identify root causes.
   
3. Collaboration:Work closely with development teams to understand application functionalities and dependencies.
   Collaborate with cross-functional teams, including QA, DevOps, and Product Management, to resolve issues and improve applications.
   Communicate effectively with customers and stakeholders to provide updates and resolutions.
   
4. Development and Maintenance:Participate in the development and deployment of application updates and enhancements.
   Write and maintain documentation for application support processes and procedures.
   Contribute to continuous improvement initiatives to enhance application support and performance.
   
5. Incident and Problem Management:Manage and prioritize incident tickets and service requests.
   Escalate critical issues to appropriate teams and ensure timely resolution.
   Conduct root cause analysis and provide recommendations for preventing future incidents.
   

Qualifications:

• Education: Bachelor’s degree in computer science, Information Technology, or a related field.
• Experience: Minimum of 5 years of experience in Java development and application support.
• Technical Skills:Proficiency in Java and Java EE technologies.
  Understanding of web technologies (HTML, CSS, JavaScript) and frameworks (Spring, Hibernate).
  Experience with databases (SQL, Oracle, MySQL) and writing complex queries.
  Familiarity with version control systems (Git, SVN).
  Knowledge of application servers (Tomcat, JBoss, WebLogic) would be advantage.
  Experience with monitoring tools and logging frameworks.
  
• Soft Skills:Excellent problem-solving and analytical skills.
  Strong communication and interpersonal skills.
  Ability to work independently and as part of a team.
  Strong organizational skills and the ability to manage multiple priorities.
  

Interested applicants, please Email,

Fabian Ling Tuong Liing

Email Address: [email protected]

Outsourcing Team

Recruit Express Pte Ltd

EA Licence No: 99C4599

We regret that only shortlisted candidates will be contacted.

Location: Bugis (Hybrid)
Salary Range: $7,000 – $9,000 per month
Employment Type: Permanent
Travel: Frequent international travel (up to 1 month at a time)

Job Summary:

We are seeking an experienced Project Engineer to oversee the installation, operation, and maintenance of critical static equipment in industrial settings, including heat exchangers, high-pressure vessels, furnaces, and related systems. This is an exciting opportunity to join a dynamic team managing complex projects involving highly technical equipment across various industries, such as oil & gas, chemical processing, and power generation.

The ideal candidate will have a strong background in engineering design, project management, and static equipment handling, with the ability to travel internationally as needed to support project execution and ensure safety and performance standards are met.

Key Responsibilities:

• Manage and oversee the full lifecycle of static equipment projects, including heat exchangers, high-pressure vessels, and furnaces.
• Collaborate with internal teams and external stakeholders to ensure successful project execution and timely delivery.
• Provide technical expertise in the design, installation, commissioning, and maintenance of static equipment.
• Ensure all equipment complies with relevant safety, regulatory, and quality standards.
• Prepare and review project documentation, including technical drawings, specifications, and reports.
• Conduct site inspections and supervise contractors to ensure compliance with safety regulations and project specifications.
• Troubleshoot and resolve technical issues related to equipment, ensuring optimal performance and reliability.
• Coordinate with vendors, suppliers, and subcontractors to ensure equipment and materials are available for timely project execution.
• Regularly report on project progress, budgets, and timelines to senior management.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related field.
• Experience: Minimum of 3-5 years of engineering experience working with static equipment (e.g., heat exchangers, high-pressure vessels, furnaces) in industrial settings.
• Project Management: Proven experience managing projects involving complex equipment, from initial design to installation and maintenance.
• Technical Skills: Strong understanding of engineering principles related to heat transfer, pressure systems, and high-temperature equipment.
• Travel: Willingness to travel internationally for extended periods (up to 1 month) as required by the project needs.
• Certifications: Professional certifications in Project Management (e.g., PMP) or relevant industry certifications are a plus.

Key Competencies:

• Analytical Thinking: Ability to assess and solve complex technical challenges quickly and effectively.
• Attention to Detail: Meticulous in reviewing design documents, equipment performance, and safety protocols.
• Collaboration: Able to work well with cross-functional teams, contractors, and clients to ensure project success.
• Problem Solving: Strong troubleshooting skills, especially in dealing with high-pressure or high-temperature equipment.
• Adaptability: Comfortable working in dynamic environments and adjusting to changing project requirements.

Benefits:

• Competitive salary and benefits package.
• Opportunities for career growth and development.
• Hybrid work model, with flexibility to work from home and the office.
• International travel opportunities for project execution and client support.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Location: Bugis (Hybrid)
Salary Range: $7,000 – $9,000 per month
Employment Type: Permanent
Travel: Frequent international travel (up to 1 month at a time)

Job Summary:

We are seeking an experienced Project Engineer to oversee the installation, operation, and maintenance of critical static equipment in industrial settings, including heat exchangers, high-pressure vessels, furnaces, and related systems. This is an exciting opportunity to join a dynamic team managing complex projects involving highly technical equipment across various industries, such as oil & gas, chemical processing, and power generation.

The ideal candidate will have a strong background in engineering design, project management, and static equipment handling, with the ability to travel internationally as needed to support project execution and ensure safety and performance standards are met.

Key Responsibilities:

• Manage and oversee the full lifecycle of static equipment projects, including heat exchangers, high-pressure vessels, and furnaces.
• Collaborate with internal teams and external stakeholders to ensure successful project execution and timely delivery.
• Provide technical expertise in the design, installation, commissioning, and maintenance of static equipment.
• Ensure all equipment complies with relevant safety, regulatory, and quality standards.
• Prepare and review project documentation, including technical drawings, specifications, and reports.
• Conduct site inspections and supervise contractors to ensure compliance with safety regulations and project specifications.
• Troubleshoot and resolve technical issues related to equipment, ensuring optimal performance and reliability.
• Coordinate with vendors, suppliers, and subcontractors to ensure equipment and materials are available for timely project execution.
• Regularly report on project progress, budgets, and timelines to senior management.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related field.
• Experience: Minimum of 3-5 years of engineering experience working with static equipment (e.g., heat exchangers, high-pressure vessels, furnaces) in industrial settings.
• Project Management: Proven experience managing projects involving complex equipment, from initial design to installation and maintenance.
• Technical Skills: Strong understanding of engineering principles related to heat transfer, pressure systems, and high-temperature equipment.
• Travel: Willingness to travel internationally for extended periods (up to 1 month) as required by the project needs.
• Certifications: Professional certifications in Project Management (e.g., PMP) or relevant industry certifications are a plus.

Key Competencies:

• Analytical Thinking: Ability to assess and solve complex technical challenges quickly and effectively.
• Attention to Detail: Meticulous in reviewing design documents, equipment performance, and safety protocols.
• Collaboration: Able to work well with cross-functional teams, contractors, and clients to ensure project success.
• Problem Solving: Strong troubleshooting skills, especially in dealing with high-pressure or high-temperature equipment.
• Adaptability: Comfortable working in dynamic environments and adjusting to changing project requirements.

Benefits:

• Competitive salary and benefits package.
• Opportunities for career growth and development.
• Hybrid work model, with flexibility to work from home and the office.
• International travel opportunities for project execution and client support.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599

Quality Assurance Engineer

· Perform Quality Assurance/Quality Engineering to ensure components, finished products and processes meet established specifications.

· Analyse material and processes and make recommendations/ take action to correct deficiencies.

· Troubleshoot equipment and process issues. Summarize and draw conclusions from test results leading to effective technical resolution of process problems.

· Disposition non-conforming material requiring advanced process/technical knowledge. Work directly with suppliers to prevent or correct discrepant material

· Perform detailed Root Cause Investigation of failed product or processes using various quality tools (5 Whys, 6 M, Ishikawa Diagram, Pareto Charts).

· Implement corrective and preventative actions.

· Work with Production, Manufacturing/Process Engineering to create validation protocols, summaries and approvals to resolve process issues and implement changes.

· Initiate corrective action requests on discrepant product/processes and verify adequacy and accuracy of corrective action taken internally and/or externally

· Apply knowledge of process control tools, statistical sampling, and other analytical techniques to maximize the quality and flow of product through the production line.

· Develop and review documented operating procedures associated with material inspection or processes

Our requirements:

• Min Diploma or Degree in Biomedical Engineering
• Min of 2 years’ experience in QA Biomedical Engineering
• Must possess excellent team work and interpersonal skills with a strong emphasis on good analytical skills
• Possess good customer interactions skills
• Sound ability to troubleshoot and repair
• Good communication skills

If you are interested in the position, do kindly drop your most updated resume to [email protected] (Attn: QA Engineer)

Thank You.

Leon Leong De Cong

R1551708

Recruit Express Pte Ltd (Healthcare & Lifesciences Division)

EA License: 99C4599

Corporate Technology is a global organization that collaborates with TE BUs on advanced technologies and the SG Corporate Technology team focuses on innovation solutions through partnerships and ecosystem.

We are seeking a team member with strong background in polymer engineering to join our team. This role is ideal for someone with expertise in engineering plastics and rubbers with interest to drive innovation and change through whitepaper/landscaping advisories, research projects, and tech scouting. The application fields will be both traditional areas of formulation and processing and metrology for connectors, cables and microfluidics, as well as emerging topics related to trends in smart materials, sustainability and AI.

Job Responsibilities:

• Engage TE BUs to identify and address technical needs related to engineering plastics and rubbers.
• Develop a deep understanding of engineering plastics and rubbers through comprehensive reviews, experimental trials, and tech scouting.
• Lead partnership research activities related to characterization, formulation, and processing of plastics and rubbers, for connectors, sealants, cables and microfluidics (as needed).
• Author whitepapers, technology landscaping reports, and advisory documents to support TE’s strategic objectives and technology development. Launch proof-of-concept projects as appropriate.
• Manage projects from initial concept through execution, including scope definition, partner selection, and project management to achieve technical and business goals.
• Oversee internal project documentation and compliance matters, including contracts, budget tracking, and technical reporting.
• Represent SG team in various forums, including technical conferences (internal & external) and senior management presentations, to share knowledge and innovations in polymer engineering.
• Collaborate with other TE polymer centers of innovation to drive alignment of SG activities.

Job Requirements:

• Ph.D. or Master’s degree in Polymer Engineering, Material Science, or a related field.
• 5-8 years of experience in R&D or product development, with a focus on engineering plastics and rubbers. Demonstrated expertise in material characterization, formulation, and processing.
• Proven experience in leading technical projects involving advanced polymers and rubbers in an industrial or corporate setting.
• Familiarity with tools and methodologies related to polymer engineering, such as material characterization techniques, formulation strategies, and processing technologies.
• Experience scouting technology state-of-art through literature, patent landscapes, or conferences
• Knowledge of engineering PjM (scope, deliverables mgmt.) and technical tools (e.g. moldflow, FA, RCA)
• Effective in verbal/written forms communication.
• Experience or certification with contract law will be advantageous.

Desirable Qualities:

• Goal-driven and comfortable working in technical management role.
• Technically curious with a broad interest in new and emerging technologies in the field of polymer engineering.
• Business-oriented, with the ability to interact effectively with other experts and management.
• Skilled at managing multiple technical projects simultaneously and reporting on their progress

Location: Bugis (Hybrid)
Salary Range: $7,000 – $9,000 per month
Employment Type: Permanent
Travel: Frequent international travel (up to 1 month at a time)

Job Summary:

We are seeking an experienced Project Engineer to oversee the installation, operation, and maintenance of critical static equipment in industrial settings, including heat exchangers, high-pressure vessels, furnaces, and related systems. This is an exciting opportunity to join a dynamic team managing complex projects involving highly technical equipment across various industries, such as oil & gas, chemical processing, and power generation.

The ideal candidate will have a strong background in engineering design, project management, and static equipment handling, with the ability to travel internationally as needed to support project execution and ensure safety and performance standards are met.

Key Responsibilities:

• Manage and oversee the full lifecycle of static equipment projects, including heat exchangers, high-pressure vessels, and furnaces.
• Collaborate with internal teams and external stakeholders to ensure successful project execution and timely delivery.
• Provide technical expertise in the design, installation, commissioning, and maintenance of static equipment.
• Ensure all equipment complies with relevant safety, regulatory, and quality standards.
• Prepare and review project documentation, including technical drawings, specifications, and reports.
• Conduct site inspections and supervise contractors to ensure compliance with safety regulations and project specifications.
• Troubleshoot and resolve technical issues related to equipment, ensuring optimal performance and reliability.
• Coordinate with vendors, suppliers, and subcontractors to ensure equipment and materials are available for timely project execution.
• Regularly report on project progress, budgets, and timelines to senior management.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Chemical Engineering, or a related field.
• Experience: Minimum of 3-5 years of engineering experience working with static equipment (e.g., heat exchangers, high-pressure vessels, furnaces) in industrial settings.
• Project Management: Proven experience managing projects involving complex equipment, from initial design to installation and maintenance.
• Technical Skills: Strong understanding of engineering principles related to heat transfer, pressure systems, and high-temperature equipment.
• Travel: Willingness to travel internationally for extended periods (up to 1 month) as required by the project needs.
• Certifications: Professional certifications in Project Management (e.g., PMP) or relevant industry certifications are a plus.

Key Competencies:

• Analytical Thinking: Ability to assess and solve complex technical challenges quickly and effectively.
• Attention to Detail: Meticulous in reviewing design documents, equipment performance, and safety protocols.
• Collaboration: Able to work well with cross-functional teams, contractors, and clients to ensure project success.
• Problem Solving: Strong troubleshooting skills, especially in dealing with high-pressure or high-temperature equipment.
• Adaptability: Comfortable working in dynamic environments and adjusting to changing project requirements.

Benefits:

• Competitive salary and benefits package.
• Opportunities for career growth and development.
• Hybrid work model, with flexibility to work from home and the office.
• International travel opportunities for project execution and client support.

All qualified applicants, please click “ APPLY NOW”

Or you may send in your resume to:

Whatsapp: https://wa.me/+6597430026

Email : [email protected]

Kimmy Low Yi Ting (Kim) | CEI Registration Number: R23112122

Recruit Express Pte Ltd Company Reg. No. 199601303W | EA LICENCE Number: 99C4599