Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

• Basic accounting knowledge for payroll and invoicing
• Prepares and monitors invoices
• Carries out administrative duties such as filing, typing, copying, binding, scanning etc
• Produces and distributes correspondence memos, letters, faxes, and forms
• Develops, organizes and maintain a filing system
• Organizes travel arrangements for managers
• Takes accurate minutes of meetings
• Replies to email, telephone or face to face enquiries
• Sorts and distributes the mail to support administrative and secretary work
• Oversees and supervises the work of junior staff & coordinates with them
• Responsible in other admin & accounting related works
• Performs any other ad-hoc duties as assigned

• Basic accounting knowledge for payroll and invoicing
• Prepares and monitors invoices
• Carries out administrative duties such as filing, typing, copying, binding, scanning etc
• Produces and distributes correspondence memos, letters, faxes, and forms
• Develops, organizes and maintain a filing system
• Organizes travel arrangements for managers
• Takes accurate minutes of meetings
• Replies to email, telephone or face to face enquiries
• Sorts and distributes the mail to support administrative and secretary work
• Oversees and supervises the work of junior staff & coordinates with them
• Responsible in other admin & accounting related works
• Performs any other ad-hoc duties as assigned

• Basic accounting knowledge for payroll and invoicing
• Prepares and monitors invoices
• Carries out administrative duties such as filing, typing, copying, binding, scanning etc
• Produces and distributes correspondence memos, letters, faxes, and forms
• Develops, organizes and maintain a filing system
• Organizes travel arrangements for managers
• Takes accurate minutes of meetings
• Replies to email, telephone or face to face enquiries
• Sorts and distributes the mail to support administrative and secretary work
• Oversees and supervises the work of junior staff & coordinates with them
• Responsible in other admin & accounting related works
• Performs any other ad-hoc duties as assigned

We are looking for an experienced and motivated Supervisor to join our team at JBS MECHANICAL & ENGINEERING PTE. LTD. The Supervisor will be responsible for overseeing daily operations, managing a team of [mention team size or type, e.g., production staff, technicians, engineers], and ensuring compliance with safety, quality, and productivity standards.

This role requires strong leadership, problem-solving skills, and an ability to communicate effectively with team members and management.

Key Responsibilities:

1. Team Leadership and ManagementLead, supervise, and support a team of [mention relevant staff, e.g., production operators, technicians, engineers].
   Delegate tasks and ensure team members understand their responsibilities.
   Foster a positive and productive work environment, encouraging teamwork and high performance.
   
2. Performance Monitoring and ReportingTrack team performance and productivity metrics to meet daily and weekly goals.
   Monitor quality standards and ensure that all work meets company requirements.
   Prepare and submit regular performance reports to management, highlighting achievements and areas for improvement.
   
3. Training and DevelopmentProvide on-the-job training to new hires and continuous development opportunities for existing team members.
   Address skill gaps through coaching, training sessions, and performance reviews.
   Promote safety and compliance with all relevant company and industry standards.
   
4. Problem Solving and Conflict ResolutionIdentify issues affecting workflow, quality, or team morale and implement timely solutions.
   Address team conflicts or performance issues professionally, maintaining a fair and respectful workplace.
   Collaborate with management to improve processes and resolve operational challenges.
   
5. Safety and ComplianceEnsure a safe work environment by enforcing safety protocols and conducting regular safety checks.
   Oversee compliance with company policies and industry regulations, such as OSHA or ISO standards.
   Organize regular safety training and meetings to keep safety top of mind for the team.
   
6. Resource and Inventory ManagementEnsure team has the necessary resources and tools to perform tasks efficiently.
   Manage inventory levels, order supplies as needed, and minimize waste.
   Coordinate with other departments (e.g., purchasing, logistics) to meet production or project timelines.

Scope of works and key responsibilities:

1. Pre-Construction Stage:

• Cost Planning and Estimating:Prepare initial cost estimates based on design drawings and project specifications.
  Provide detailed and accurate quantity take-offs from drawings (e.g., for materials, labor, and overheads).
  Advise on cost-effective alternatives for materials and construction methods.
  Develop cost plans that align with the client’s budget.
  
• Tendering and Procurement:Assist in the preparation of tender documents and the selection of contractors.
  Review and analyze tenders submitted by contractors and subcontractors.
  Prepare cost comparisons for tender evaluation.
  Assist in selecting the most suitable contractor based on cost and capability.
  
• Value Engineering:Conduct value engineering workshops to identify areas for cost savings without compromising quality or performance.
  Provide alternative solutions or materials that can reduce costs.
  

2. Construction Stage:

• Monitor the progress of construction works
  Maintain detailed records of all project costs, including materials, labor, plant, and overheads.
  Provide regular reports to the client and project team.
  
• Prepare interim payment certificates
  Verify claims for progress payments
  
• Assess and manage variations (changes in scope of work, design alterations, unforeseen circumstances).
  Quantify and price variations and ensure they are properly documented.
  

3. Post-Construction Stage:

• Prepare and agree on the final account with contractors once the project is completed.
  
• Provide a detailed post-project cost analysis comparing the final cost with the initial budget and estimates.
  
• Assist in resolving any contractual disputes between the client and contractor if any.
  

Job Responsibilities

· Prepares and submit shop drawings / As Built Drawings.

· Attend all coordination meeting regards to technical issues.

· To support Marketing, QS / Project Departments in technical enquiries.

· Able to manage the process from sample submission, production such as cutting list or fabrication drawings etc.

· Able to manage & liaise with sub-contractors, Main-contractors and client’s engineers.

· Project filing or drawings in Soft Copy and Hard Copy is required

· Create any freehand drawings / sketches to initiate preliminary drawings, including of cutting list

· Studies and examines drawings and specification of tender requirement.

· To attend on going site meeting and liaise with contractors, suppliers and clients to meet the requirements of the ongoing tender/project works.

· Any other tasks as assigned by superior.

Job Requirements

· Minimum qualification: Diploma, Higher Diploma, Bachelor Degree or equivalent in related field.

· Minimum 3 years of working experience in Structural Steel & metal works industry in Singapore.

· Knowledge of AutoCAD & REVIT(BIM).

· Resourceful, result oriented, able to meet deadline, good problem-solving skill and excellent time management

Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Centre for Urban Solutions is a research centre in innovative solutions and technologies for urban centres and built environment. The key objective is to support efforts to provide leadership in research and development in innovative solutions for sustainable living and infrastructures for future cities.

The Coastal Protection and Flood Management Research Programme (CFRP) aims to advance knowledge in coastal and flood resilience and spur the growth of a vibrant research and development ecosystem for coastal and flood resilience in Singapore.

The (CFRP) research framework consists of four vertical programmes in which applied research is conducted to generate new knowledge and develop novel, effective, smart solutions for coastal protection and flood management. The framework has three horizontal programmes of broad outcomes that inform and support the verticals. The CFRP will develop innovative multi-functional coastal protection and flood management solutions and will: Catalyse the growth of a local R&D ecosystem to support long-term national agenda; Drive the development and application of effective and smart solutions; Facilitate translation and commercialisation of solutions.

As part of this programme, Vertical 1 Innovative Engineering Solutions, Project 4: Eco-cement enhanced methods for beach erosion control and beach land restoration through soil accumulation in Singapore, will explore eco-friendly and sustainable solutions for coastal protection and land reclamation over beach land inundated by sea level rise.

We are looking for a Research Fellow, based in School of Civil and Environmental Engineering (CEE), to work effectively for advancing the engineering solutions to develop a new Eco-cement enhanced method to form a barrier for coastal protection and land restoration for Singapore and beyond. The role will focus on performing independent and collaborative research to meet the project objectives, developing new solutions, and publishing high-quality journal papers to promote the international reputation of the Centre and the University.

Key Responsibilities:

• Conduct in-depth research on advanced environmentally friendly materials suitable for coastal barrier design and construction, considering durability, environmental impact, and cost-effectiveness.
• Design and oversee laboratory experiments with research team to test the performance and durability of materials under simulated coastal environmental conditions.
• Perform numerical study of the model test. Analyze and interpret data to make informed recommendations for costal protection system design and optimization
• Writing and publication of results in peer-reviewed journals
• Assist in securing external funding through grant applications and proposals

Job Requirements:

• PhD in Coastal Engineering, Biogeotechnical Engineering, Civil Engineering or related discipline
• At least 1-year research experience in related areas.
• Strong background in materials testing, analysis, and selection.
• Experience in ground improvement, geotechnical foundation design, finite element analysis.
• Excellent analytical and problem-solving skills.
• Ability to work collaboratively in a multidisciplinary team.
• Publication track record is an advantage
• Good written and oral communication skills in English - essential for data analysis and communication with stakeholders

Interested applicants are invited to submit a cover letter/full CV/ statement of research interests in one document. Enquiries about this position can be made to Dr. WU Shifan ([email protected]).

We regret to inform that only shortlisted candidates will be notified.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 15 Years of working experience in the related field is required for this position.

• Preferrable 15 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 10 Years of working experience in the related field is required for this position.

• Preferrable 10 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

Responsibilities

• Lead, motivate, and support a large team within a time-sensitive and demanding environment, including career development plans for direct reports and problem resolution
• Manage data collection for the updating of metrics to achieve productivity targets, reduce cost per unit, eliminate errors, and deliver excellent customer service
• Partner with cross-functional teams to improve proprietary tools and systems
• Work closely with legal and safety departments to ensure that activities remain compliant
• Oversee materials and inventory
• Conduct budget reviews and report cost plans to upper management

Required skills and qualifications

• Two or more years of proven success in an operations management role
• Strong skills in budget development and oversight
• Excellent ability to delegate responsibilities while maintaining organizational control of branch operations and customer service
• Proficiency in conflict management and business negotiation processes
• Knowledge of business productivity software and an aptitude for learning new applications

Preferred skills and qualifications

• Bachelor’s degree (or equivalent) in operations management, business administration, or related field
• Working knowledge of management software programs, including NetSuite, QuickBooks, and CenterPoint Payroll
• Strong IT skills, including database development
• Multiple years of financial and account reporting experience
• Ability to communicate in more than one language

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Job Description:

1. Performing general inspection of parts and products at the Incoming/In-Process/Outgoing gate.
2. Generate Standard QA/QC inspection report.
3. Administrative tasks.
4. Logistics support.

Competence Requirements

• Preferred Secondary, NTC certification holder from related CNC/Fabrication industry.
• Preferably with 2 years of related work experience in manufacturing environment for non-technical trained staff.
• Able to read part drawing, usage of measuring equipment are added advantage.
• Computer competency.

Job Description:

• Supervise and lead the construction team to lay down construction milestone.

• Manage construction activities, ensuring timely and smooth progress of the operations.

• Responsible for implementing the work plan and attending project meetings

• Resolve design site problems encountered during the construction period.

• Producing site progress report to management.

• Monitor and ensure subcontractors comply with specified requirements.

• Identify and comply with all applicable statutory/ regulatory requirements related to project.

• Coordination and sequencing of works of different subcontractors.

• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.

• Respond swiftly to work delays, emergencies and other problems.

• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

• At least 12 Years of working experience in the related field is required for this position.

• Preferrable 12 years of project management experience in the high rise projects and mixed development in building projects

• Required Skill(s): leadership, technical, planning, coordination, multi-task

• Preferably Manager specialized in Engineering - Civil/Construction/Structural or equivalent.

We are seeking an a Production Planner to join our UAV team. The ideal candidate will be responsible for planning, scheduling and coordinating production activities to ensure timely delivery of unmanned aerial vehicles (UAVs) while optimizing resources and maintaining quality standards. This role requires strong analytical, organizational, problem-solving skills and with a deep understanding of production planning and supply chain management.

Job Description:

a. Production Scheduling:

• Develop and implement detailed production schedules for UAV manufacturing, ensuring timely and efficient production.
• Adjust schedules based on changing demands, resource availability and unforeseen delays.

b. Inventory and Material Management:

• Monitor inventory levels and coordinate with procurement to ensure all materials and components are available.
• Optimize inventory levels to avoid shortages or excess stock.

c. Capacity Planning:

• Analyze production capacity and proposed allocation of resources (machinery, manpower, materials) to meet production targets.
• Collaborate with manufacturing team to ensure production aligns with available resources and equipment maintenance schedules.

d. Collaboration with Cross-functional Teams:

• Coordinate between engineering, procurement, quality assurance and manufacturing teams to ensure seamless workflow and communication.
• Work closely with program manager, quality control and procurement teams to align production with project timelines and customer demands.

e. Production Monitoring:

• Track production progress, identify bottlenecks and proactively adjust schedules to mitigate potential delays.
• Ensure that production goals are met while maintaining high standards of quality.

f. Data Reporting:

• Generate and present regular reports on production performance, inventory levels and resource utilization.

g. Quality Assurance:

• Work closely with the quality control team to ensure assmebled UAVs meet company standards

Job Requirements:

• Degree/ Diploma in either Supply Chain Management, Production/Operations Management or any related field.
• Possess 3 years of experience in production planning
• Proficiency in SAP production planning software and Microsoft Office Suite (Excel, Word, PowerPo (optional but preferred)

Seeking a highly organized and proactive Administrative Executive to support our company’s daily operations and ensure the smooth functioning of our office environment. The ideal candidate will handle a wide range of administrative tasks, support management and coordinate between departments to ensure efficient workflow. This role requires excellent communication skills, attention to detail and the ability to manage multiple priorities in a fast-paced environment.

Job Description:

a. Office Administration:

• Manage office operations, including maintaining office supplies and equipment
• Serve as the first point of contact for visitors and provide assistance where needed.
• Oversee the smooth functioning of day-to-day office procedures.

b. Communication:

• Handle phone calls, emails and directing queries to the appropriate parties.

c. Meeting Coordination:

• Arrange and set up conference rooms, equipment and catering for meetings and events.

d. Data Management and Record Keeping:

• Maintain filing systems (both physical and digital), ensuring records are organized and up-to-date.
• Input and manage data in spreadsheets and databases

e Expense and Invoice Management:

• Track and reconcile staff expenses, ensuring timely submission and reimbursement.
• Assist with invoice processing and basic financial record-keeping as needed.

f. Event Coordination:

• Organize company events, meetings, or training sessions, handling all logistical aspects such as venue booking, catering, and attendee communication.

Job Requirements:

• Degree/ Diploma in Business Administration, Management or any related fields.
• Possess 2 years of experience in an administrative or executive support role.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook) (optional but preferred)

Job Responsibilities:

• Receive, record, and process daily purchase requisitions from the production department
• Negotiate with the supplier for the most cost-effective deal
• Manage and liaise with vendors to ensure on-time delivery of goods
• Liaise with internal department personnel on project-related activities
• To attend meetings to understand and support project activities
• To perform any other duties as assigned by the immediate supervisor

Job Requirements:

• At least Primary/Secondary School/"O" Level in any field
• At least 2 years of working experience in the related field is required for this position
• Able to effectively communicate with suppliers and vendors

Job duties and responsibilities:

• Lead the Production Division in formulating and implementing production business plans to achieve the company goals and objectives.
• Manage and promote the company’s core values, business objectives, and targets, including the development of supporting personnel and features for the continued growth of the company.
• Induct, train, coach, and develop human resource and succession planning for the division.
• Participate and contribute actively either as the chairman or as a member of the various committees of the company or any other company-wide gathering.
• Maintain the discipline and cohesiveness of staff under charge, working towards achieving the corporate objectives. Have a nose for recognising problems.
• Need to write to internal or external customers most effectively and concisely. Conversely, must be able to converse concisely and timely.
• Coordinate and take leadership of all the managers and assistant managers who are heads of their respective departments.
• Manage and delegate work within the division sphere.
• Lead in the management and control of budgets for jobs designated to the department.
• Led and formulated plans for the expansion and improvement of the production division.
• Oversee all production and maintenance projects to the satisfaction of the client's requirements by providing technical and management guidance to production departments.
• Ensure all production department projects are planned, coordinated, and executed smoothly to meet customers’ requirements with the highest quality and EHS compliance.
• Manage and deploy production resources (manpower, material, tools & equipment, logistics, technical, etc) efficiently and productively.
• Analyse job scope and plan resources with the department heads.
• Liaise with customers on job matters.
• Manage sub-contractors.
• Chair and conduct daily production and monthly safety committee meetings.
• Approve in-house training programmes and training materials.
• Conduct in-house training for staff and when required.
• Forecast the divisional requirements.
• Communicate and carry out the management requirements to subordinates.
• Implement the company’s IMS system for continuous improvement.
• Conduct post-project performance evaluation and identify areas for improvement.
• Ensure project costs are controlled within budget and minimize wastage.
• Continuously review and improve work methods and enhance the productivity of workers.
• Conduct an internal audit and self-assessment for IMS.
• Oversee the development of production indicators, man-hour standards, work instructions, and risk assessments.
• Act on behalf of the COO in his absence.
• Perform any other duties assigned by the COO.

Minimum Requirements:

• A Degree or Diploma in Engineering.
• Minimum 3 years experience in Engineering maintenance services
• Possess strong leadership and organisational qualities.
• Possess strong written and spoken communication skills.

Job Duties and Responsibilities:

• Achieve sales & margin targets through existing/potential clients
• Develop & manage new clients and look for business opportunities
• Effectively plan sales calls including cold-calls
• Provide regular customer services and build strong relationships with clients
• Follow up quotation or/ business opportunities closely till obtaining order confirmation

Job Qualifications:

• Proven experience in Sales / Business Development or relevant role
• Excellent knowledge of MS Office
• Exceptional customer service skills
• Fast learner and passion for sales
• Self-motivated with a results-driven approach

Responsibilities

· Establish, execute plan to expand customer base and explore new areas/segments to increase sales revenue.

· Engage with customers for queries, resolve issues and follow up on inquiries.

· Respond timely to customer orders, confirm delivery dates, coordinate changes and expedite requests from customers.

· Manage and maintain a database of customer records and customer pricing.

· Prepare and track sales quotations and maintain sales pipelines.

· Provides comprehensive market intelligence, benchmarking, constant updates on price comparison cum movement in the marketplace.

· Establish rapport and build good customer relationship.

· Provides sales performance report and timeline to achieve target.

· Willingness to undertake ad hoc projects being assigned by the management.

Requirements

· Diploma level in any discipline.

· Minimum 2 years of experience in sales, sales admin support or customer service experience.

· A team player and adaptable in a highly competitive environment.

· Possess excellent interpersonal and communication skillsets.

· Strong planning, presentation and report writing skills.

· Motivated and enthusiastic with a strong drive to achieve sales target.

· Computer literacy with experience in using Microsoft Office applications.

· Independent, resourceful and enjoy communicating with all levels within an organization.

· Able to start work immediately or given short notice.

· Class 3 driving licence and own transport.

Job Description:

• Ensure the machine is working correctly, and calibrating the machine to ensure proper measuring.
• Perform incoming, in-process and final inspection as per customer requirement.
• Maintain calibration record of measuring equipment.
• Document inspection results by completing reports and logs.
• Maintain safe and healthy working environment by following standards and procedures.
• Raise non-conformance report if necessary.

Job Requirements:

• NITEC/Higer NITEC in Precision Engineering.
• 2 -3 years of relevant QC experience in a manufacturing environment and knowledge.
• Able to interpret technical/mechanical drawings of geometrical dimensioning and tolerance.
• Able to perform CMM measurement; preferably with Wenzel or Zeiss.

Job Responsibilities:

• Prepare import/export documents
• Coordinate with vendors/customers for delivery arrangements
• Work with logistics partners to ensure timely and accurate shipments
• Ensure shipment documents comply with customs regulations
• Ensure timely invoicing of shipments as per company KPIs
• Maintain accurate and up-to-date shipping records
• Monitor production schedules and release work orders to meet shipment deadlines
• Prepare and review quotes based on customer requests
• Review contracts to ensure consistency with quotes
• Support purchase order generation, order confirmation, and delivery

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Administrator
• Preferred with knowledge of SAP
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Responsibilities:

• Operate 4-5 axis CNC Vertical Milling Machines and Horizontal Boring Machines.
• Set up machines accurately, including tooling, fixtures, and workpieces, based on engineering drawings and job specifications.
• Keep up with the housekeeping requirements at the workstation.
• Carries out duties as assigned by Foreman.

Requirements:

• Preferably 3 to 5 years experience in setting up and operating CNC milling / Turning centre.
• Understanding of tooling criteria, machining applications and process documentation.
• Min ITE Technical Certificate, preferably in Precision Metal Machining.